Search Results

Search found 98288 results on 3932 pages for 'user interface'.

Page 769/3932 | < Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >

  • Memory Stick Controller is not compatible with this version of Windows.

    - by nona urbiz
    I'm getting this error message in the Action Center on Windows 7, and I can't seem to solve it through Windows or through searches on Google: RICOH R5C592 PCI-CardBus/IEEE-1394/SD Card/Memory Stick Controller is not compatible with this version of Windows. Thanks for any help PS. I wasn't sure if you're allowed to post questions like this, about proprietary software, but I checked the FAQ and it seemed ok. Response: The URL I am told to visit it this but I can't tell which I should choose that I am originally presented with, or what to put in to select, as I am not sure what input it is referring to.

    Read the article

  • Computer does not switch on after power outage

    - by cristian
    VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

    Read the article

  • How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

    - by Ian
    I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

    Read the article

  • Windows 7 MSDN version

    - by Larry Branham
    I recently purchased a copy of Windows 7 online. Upon trying to install, it stopped and I was told that it could not find a 64 bit driver for my CD/DVD and I could not finish install. I contacted Microsoft and was told that this was something called an MSDN version according to the product key and that was the reason for the problem. They also said is was illegal to sell it to me. The company I bought it from never returned my calls or emails and luckily I got money back through Amazon. Amazon didn't even want me to send it back. Anyway my question is, is there anyway to load this onto my system and will I have problems or should I just throw it out? Any help would be great. Thanks

    Read the article

  • What anti-keylogging programs can you use when using public PCs

    - by Jason Smith
    Are there anti-keylogging programs that can keep you safe while you are using a public PC terminal? Do they exist and what are these? I like to know that I am safe when entering data on a public PC for example from malware or keyloggers, who knows where it has been. Or else, how can I keep my personal data safe when using a public PC? I think this question is relevant for anyone who is concerned about their security on any level.

    Read the article

  • What is this jumper for on my new motherboard?

    - by jasondavis
    I am building a new PC, I just got my motherboard in the mail today. It is a ASRock X58 Extreme 3. I am reading over the manual for it and one of the jumpers says this. There is a 3 pin jumper labeled 1 2 3, with pins 1 and 2 shorted by default it is "+5v" If I manually change it to short jumper pins 2 and 3 instead of 1 and 2 then it will be "+5vSB (standby) for PS/2 or USB wake up events. So I am confused as to exactly what this is for. Can someone explain what it means, why I would want one other the other?

    Read the article

  • How to prevent truncated output lines in Console2?

    - by evan
    I just started using Console2 and can't seem to find a way to scroll horizontally when command output is wider than the current size of the window and when I try to resize the window the truncated information is just lost. Is there a way to add horizontal scrolling or to fix the resizing issue? If not, are there programs similar to Console2 that do not have this problem? Thanks! EDIT: Actually, my bad, no information is getting lost, it's just not resizing it properly. EDIT: Turns out that if you resize Console2 to make it smaller and cutoff text you can't resize it and get it back?? Is that a bug?

    Read the article

  • Making the iPhone work with stripped down Windows XP

    - by Gabriel
    Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

    Read the article

  • Flash plugin locks up Firefox, Chrome and Safari behind a corporate proxy, IE6 works fine

    - by Shevek
    At work I am forced by corporate policy to use IE6. Obviously this is not so good so I use FF for most of my browsing. However there is a problem once I have installed the Flash plug-in - FF locks up when trying to load Flash media. Looking at the status bar at the time of the lock up it appears this happens when the browser tries to get cross domain data. The Flash Active X plug-in in IE does not suffer this issue. I have tried it in a brand new profile in FF with Flash as the only plug in and it locks up. We have 2 different proxy servers and both exhibit the same problem. I have also tried Chrome and Safari and both lock up with the plug-in installed. So, has anyone else had this problem and solved it? Or, is there any way to disable cross domain data access in the flash plug-in? Or, is there any way to disable the "This site needs an additional plug-in" ribbon which appears when the plug-in is not installed. Many thanks!

    Read the article

  • VSFTPD Unable to set write permissions on folder

    - by Frank Astin
    I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

    Read the article

  • Windows 7 x64 installation freezes on new PC build

    - by jhsowter
    Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

    Read the article

  • How to use remote microphone on Remote Desktop

    - by user553702
    I wish to connect to a remote Windows 7 PC that has a microphone, and use that local microphone (on the destination PC) in recording applications. Unfortunately whenever I connect on Remote Desktop, the remote PC's local microphones become hidden and disabled. Remote Desktop seems to force using the source computer's microphone with redirection, without an option to use the remote PC's microphone Isn't there a way to enable using the remote PC's microphone? I don't get why this should be so hard.

    Read the article

  • Traceroute, * at first router

    - by Jérôme
    When using traceroute on my mac to check the path to any website, the first line is always 3 stars. imac:~ Jerome$ traceroute google.com traceroute: Warning: google.com has multiple addresses; using 173.194.70.113 traceroute to google.com (173.194.70.113), 64 hops max, 52 byte packets 1 * * * 2 217-168-54-101.static.cablecom.ch (217.168.54.101) 9.515 ms 8.757 ms 10.104 ms 3 172.31.208.73 (172.31.208.73) 14.512 ms 14.605 ms 14.264 ms 4 ch-zrh01b-ra1-ae-1.aorta.net (84.116.134.142) 13.587 ms 12.892 ms 13.936 ms 5 74.125.49.101 (74.125.49.101) 13.966 ms 14.850 ms 14.915 ms 6 72.14.232.120 (72.14.232.120) 26.573 ms 72.14.232.88 (72.14.232.88) 20.072 ms 19.758 ms 7 72.14.236.68 (72.14.236.68) 26.913 ms 72.14.236.20 (72.14.236.20) 26.825 ms 72.14.239.62 (72.14.239.62) 25.381 ms 8 209.85.254.118 (209.85.254.118) 22.240 ms 22.365 ms 209.85.254.112 (209.85.254.112) 24.826 ms 9 * * * 10 fa-in-f113.1e100.net (173.194.70.113) 25.715 ms 26.960 ms 25.191 ms As far as I know, * means no answer from the router. How come I have stars at the very first line ?

    Read the article

  • What are the "N" versions of Windows 8?

    - by Gustavo Gondim
    Microsoft just released the final Windows 8 versions for MSDN members, before its consumer release in october. Anyway, I am a MSDN member. Today I went to see my downloads page and I found a list of the new versions to be downloaded. Windows 8 Windows 8 N Windows 8 Pro Windows 8 Pro N Windows 8 Enterprise Windows 8 Enterprise N I know the difference between the versions "Windows 8", "Windows 8 Pro" and "Windows 8 Enterprise", which you easily find at wikipedia. But, I really need to know the difference between these versions and the "N" versions before download one of them.

    Read the article

  • Why doesn't update-manager allow me to upgrade distribution?

    - by spoulson
    I have an Ubuntu 9.04 PC behind a corporate firewall and proxy server. This requires that in order to get update-manager to fetch and apply updates, I must set the proxy and authentication settings in the Synaptic network configuration. Once done, I can check for updates and things work smoothly (except I don't get popup notifications of new updates, must manually check periodically). However, distribution updates just don't show up in update-manager, such as the newly released 9.10 Karmic Koala. I had the same issue in upgrading 8.10 to 9.04 and solved it by downloading and upgrading from the 9.04 ISO. What do I need to do to upgrade to 9.10 using the standard update-manager UI?

    Read the article

  • Windows 7 x64 "upgrade" repair fails

    - by Polynomial
    I've been running into issues with Windows Update, which I can't seem to fix. The hotfixes don't work, nor does the Windows update readyness tool, or the manual SP1 upgrade. I get various esoteric errors which nobody seems to have a fix for. Looks like some of the update cache is corrupt and digital signatures seem to be broken on some packages / Windows Update components. Long story short, I have discovered the only option is to do a repair operation on the OS, to repair everything. It's so corrupt that only a complete replacement will fix it. According to various sources (including MSKB) one can perform a repair by running an in-place upgrade. I've got the Windows 7 Ultimate retail disc, which I've inserted into my machine. I ran setup.exe and went through in the following order: Install now Go online to get latest updates (I've also tried not getting updates) Wait for updates to be downloaded Select Windows 7 Ultimate (x64 architecture) and click next Accept the T&Cs, click next Click Upgrade At this point it spends a minute on the "checking compatibility" screen, after which I get the following error: The following issues are preventing Windows from upgrading. Cancel the upgrade, complete each task, and then restart the upgrade to continue. You can’t upgrade 64-bit Windows to a 32-bit version of Windows. To upgrade, obtain a 64-bit version of the installation disc, or go online to see how to install Windows 7 and keep your files and settings. 32-bit Windows cannot be upgraded to a 64-bit version of Windows. To upgrade, obtain a 32-bit version of the Windows installation disc. It also mentions a warning about potential conflicts with a storage driver and VS2010, but that doesn't seem to be the blocking issue. My currently installed version of Windows is Ultimate 64-bit (absolutely sure of this) and the disc is definitely a x86 / x64 combined Ultimate retail disc. There seem to be a few people who have run into this (e.g. this question), but I've not seen any answers. I've checked the event viewer, but can't spot anything in there that's related. Any idea how I can get this working? P.S: Just to pre-empt the inevitable "are you suuuuuuuuuuuuure it's x64 Ultimate?" questions:

    Read the article

  • Why suddenly DOS-type hexadecimal file names?

    - by Marvin Nicholson
    One of the fairly recent folders on my XP SATA data drive suddenly shows DOS-type hexadecimal file names (i.e., eight characters with three-character extensions) I deleted them and now my Recycle bin shows them with a tilde (i.e., 194ABE~1.JPG). The images are all valid but the file names I assigned are gone. (The 2-terabyte SATA data drive has no OS, if that matters.) The last time this happened on an IDE drive, I was able to back up all the remaining files just before the drive died. Am I facing the same scenario now with my 2-terabyte SATA data drive? It is only a couple of years old. Should I quickly buy another one and back up 20 years of files to it before my current drive dies?

    Read the article

  • Sensei mouse sensitivity

    - by Marcelo
    I've recently acquired a Steelseries Sensei. Despite being a great mouse, I'm having some trouble finding settings that I can get used to... The mouse engine allows me to set a CPI from 0 to 5700. It also allows me to set it even higher, calling it "DCPI" (Double CPI), from 5701 to 11400. On Window's Control Panel, there's a "Pointer Speed" slider and a "Enhance Pointer Precision" checkbox (wording may be different as I use a non-english version). The majority of games allow me to set an in-game "Mouse Sensitivity". Some games let me use a "Raw mouse input". I'm already familiar with the basics of CPI/DPI - "higher CPI means less hand movement", but what are the differences between all those options? Is there a "better" or "worst" setting?

    Read the article

  • Annoying Application on Mac Creating Unwanted File

    - by superuser
    Last year, I installed an application on my Mac called Pocketcam. A few days later, I have removed the app from my Mac by dragging and dropping it into the trash bin. Apparently by doing that, it didn't remove the application completely as there are still some files left on the computer that is creating a log file in my document folder. The file keeps coming back after deleting it numerous times. So my question is, "how do I find the file that is creating that file and remove it completely from my Mac?"

    Read the article

  • How to make Chrome spell check the whole text field?

    - by Laurent
    On Firefox, whenever a word is incorrect in a text field, it is underlined in red. Chrome does the same but the difference is that it underlines in red only when I move the caret over the word. So if I want to spell check the whole text field, I have to move the caret from the beginning to the end of the text field. Is it possible to make Chrome works more like Firefox and spell check the entire text field automatically?

    Read the article

  • Bonjour/DNS Service Discovery queries

    - by senloe
    I'm trying to implement dns service discovery in my application (no, I'm not asking for a programmatic answer). What I believe is one of my big pain points is generating the query. I know I need to send out a multicast broadcast on port 5353 and want to look for devices of type _ipp._tcp and _print._tcp, but I don't know what the question section needs to look like. For example, in SSDP I sent out a query that looks like the following: "M-SEARCH * HTTP/1.1\r\n" "HOST: 239.255.255.250:1900\r\n" + "MAN: \"ssdp:discover\"\r\n" "ST: urn:schemas-upnp-org:device:Printer:1\r\n" "MX: 5000\r\n\r\n" From what I know about a DNS query I need to send something like: "_ipp.tcp,all,all" but I know there needs to be more. Any pointers to documentation, etc would be greatly appreciated! update rfc1035 appears to contain promising information re the message structure.

    Read the article

  • mercurial .hgrc notify hook

    - by Eeyore
    Could someone tell me what is incorrect in my .hgrc configuration? I am trying to use gmail to send a e-mail after each push and/or commit. .hgrc [paths] default = ssh://www.domain.com/repo/hg [ui] username = intern <[email protected]> ssh="C:\Program Files (x86)\Mercurial\plink.exe" -ssh -i "C:\Program Files (x86)\Mercurial\key.pub" [extensions] hgext.notify = [hooks] changegroup.notify = python:hgext.notify.hook incoming.notify = python:hgext.notify.hook [email] from = [email protected] [smtp] host = smtp.gmail.com username = [email protected] password = sure port = 587 tls = true [web] baseurl = http://dev/... [notify] sources = serve push pull bundle test = False config = /path/to/subscription/file template = \ndetails: {baseurl}{webroot}/rev/{node|short}\nchangeset: {rev}:{node|short}\nuser: {author}\ndate: {date|date}\ndescription:\n{desc}\n maxdiff = 300 Error Incoming comand failed for P/project. running ""C:\Program Files (x86)\Mercurial\plink.exe" -ssh -i "C:\Program Files (x86)\Mercurial\key.pub" [email protected] "hg -R repo/hg serve --stdio"" sending hello command sending between command remote: FATAL ERROR: Server unexpectedly closed network connection abort: no suitable response from remote hg! , error code: -1 running ""C:\Program Files (x86)\Mercurial\plink.exe" -ssh -i "C:\Program Files (x86)\Mercurial\key.pub" [email protected] "hg -R repo/hg serve --stdio"" sending hello command sending between command remote: FATAL ERROR: Server unexpectedly closed network connection abort: no suitable response from remote hg!

    Read the article

  • sudo moo commands in mac

    - by sagar
    Hey ! every one. I have gone through following link It's pretty interesting. It gives listing of some funny commands over ubuntu & Linux I am eager to know about commands like these on mac. Does any one know commands like on mac ?

    Read the article

  • yum install php-tidy - no more mirrors

    - by Lylo
    Hi im trying to get the tidy extensions installed on centos running php 5.3 Thanks Downloading Packages: http://repo.webtatic.com/yum/centos/5/x86_64/php-tidy-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-pdo-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-mysql-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-gd-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-xml-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-common-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-devel-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-cli-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error Downloading Packages: php-tidy-5.3.5-1.w5.x86_64: failure: php-tidy-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-cli-5.3.5-1.w5.x86_64: failure: php-cli-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-5.3.5-1.w5.x86_64: failure: php-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-pdo-5.3.5-1.w5.x86_64: failure: php-pdo-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-devel-5.3.5-1.w5.x86_64: failure: php-devel-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-mysql-5.3.5-1.w5.x86_64: failure: php-mysql-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-common-5.3.5-1.w5.x86_64: failure: php-common-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-xml-5.3.5-1.w5.x86_64: failure: php-xml-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-gd-5.3.5-1.w5.x86_64: failure: php-gd-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try.

    Read the article

< Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >