Search Results

Search found 46727 results on 1870 pages for 'system reflection'.

Page 771/1870 | < Previous Page | 767 768 769 770 771 772 773 774 775 776 777 778  | Next Page >

• Solaris Fibre Channel target - Configure QLogic QLA2340

  - by growse

  I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA. For some reason, the qlc and qlt drivers don't support the QLA2340, so I'm using the qla2300 driver from QLogic's website. I've also got the scli utility installed for configuration. The HBA is detected by the system. That said, it's not clear how I get from this point to a point where I have a ZFS volume being exposed as an FC target. I was originally following this guide (http://www.youtube.com/watch?v=yzEBd3l7Qn4) but it seems that without the qlc/qlt drivers, Sun's configuration tools won't work. Does that also imply that COMSTAR also won't work? What's the best way to expose an FC target with this setup? Most of the options I'm seeing in scli complain that the port state is LinkDown (it is, I've not plugged anything in yet). Do I have to have my FC client plugged up and working before I can configure the target? Apologies for the slight vagueness of the question, but I'm not overly familiar with the terminology.

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• How to avoid Windows Genuine Advantage for an XP update?

  - by hlovdal

  I am about to apply updates to a windows xp installation I have not booted in a couple of years. When going to update.microsoft.com, it forced me first to accept an activex installation and now it wants me to install wga: Windows Update To use this latest version of Windows Update, you will need to upgrade some of its components. This version provides you with the following enhancements to our service: <... useless list of "advantages" ... Details Windows Genuine Advantage Validation Tool (KB892130) 1.1 MB , less than 1 minute The Windows Genuine Advantage Validation Tool enables you to verify that your copy of Microsoft Windows is genuine. The tool validates your Windows installation by checking Windows Product Identification and Product Activation status. Update for Windows XP (KB898461) 477 KB , less than 1 minute This update installs a permanent copy of Package Installer for Windows to enable software updates to have a significantly smaller download size. The Package Installer facilitates the install of software updates for Microsoft Windows operating systems and other Microsoft products. After you install this update, you may have to restart your system. Total: 1.5 MB , less than 1 minute I have heard nothing but bad things about wga, and I absolutely do not want it installed on my system (this answer seems to give some options). Searching for "windows xp" at microsoft's web pages brought up this page which says Windows XP Service Pack 3 Network Installation Package for IT Professionals and Developers Brief Description This installation package is intended for IT professionals and developers downloading and installing on multiple computers on a network. If you're updating just one computer, please visit Windows Update at http://update.microsoft.com . ... File Name: WindowsXP-KB936929-SP3-x86-ENU.exe I am currently downloading this file. Will installing this bring my installation up to date with security updates? What about later updates whenever a new problem is discovered, how can i update without using wga?

  Read the article

• Login to OS X Server User Account from Local Computer

  - by Brod Wilkinson

  I have OS X Server installed on a mac mini. I've created several User accounts, one of which is Account Name: Bob Password: abc123 From the Mac Mini's login screen I can choose "Server" (main account) "Bob" (Bobs account) and "Other..." OS X Server Accounts, from "Other..." if I input Bobs credentials it will log me in. I also have a macbook air, I would like to be able to select from the Login Screen "Other..." input Bobs credentials and have it login to Bobs account, or any other User Account for that matter. My Server is setup as private with the server address: server.network.private Following some googled instructions as well as apples very own instructions I have: Setup an Open Directory with Username: diradmin Password: abc123 Then on the macbook air gone into System Preferences > Users & Groups > Login Options and clicked Join next to Network Account Server, input my server (server.network.private) with diradmin credentials and its connected. Great. I've also ticked Allow Network Users to Login and Login Window and selected All Users. I was assuming this would allow my macbook air to login to the "Bob" account by selecting "Other..." from the login window although there is no "Other..." option. I then setup a VPN, basic credentials, logged into it on the macbook air and still not much has changed. I am able to share screens with the "Bob" account form my macbook air by logging in by clicking Share Screen... from the Finder under Shared > Network Server and then clicking Login In but this obviously requires the macbook air to already be logged into an account before it can share screens which is not suitable. Is there any way to simply login to the OS X Server User Account from the macbook air's login screen via the "Other..." like it does on the mac mini's login screen? Thanks in advance. Operating System: OS X 10.9 Mavericks OS X Server: Version 3

  Read the article

• Cannot log into Oracle Enterprise Manager 11g: ORA-28001

  - by Álvaro G. Vicario

  I can no longer log into Oracle Enterprise Manager 11g. I get this error message: ORA-28001: the password has expired (DBD ERROR: OCISessionBegin) I could log into the server using SQL*Plus. I warned me that the password was going to expire in 7 days (which is not the same as being already expired). Following advice from several documents, I ran these commands from SQL*Plus: ALTER USER sys IDENTIFIED BY new_password; ALTER USER system IDENTIFIED BY new_password; SQL*Plus no longer warns about passwords, but I still cannot use the Enterprise Manager. Then I followed this to remove password expiration: ALTER PROFILE default LIMIT password_life_time UNLIMITED And I've also restarted the Oracle services. In case it was using cached credentials, I've tried to connect from several browsers in several computers. No way: I still get ORA-28001 in Enterprise Manager. What am I missing? Update: Some more info SQL> select username,ACCOUNT_STATUS,EXPIRY_DATE from dba_users; USERNAME ACCOUNT_STATUS EXPIRY_D ------------------------------ -------------------------------- -------- MGMT_VIEW OPEN SYS OPEN SYSTEM OPEN

  Read the article

• Poor gaming performance with hyper-v installed in windows 8

  - by SnowCrash

  I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

• Using Managed Beans with your ADF Mobile Client Applications

  - by [email protected]

  Did you know it's easy to extend your ADF Mobile Client application with a Managed Bean just like it is with an ADF web application?  Here's how: Using the New Gallery (File -> New), create a new Java class.  This class should extend oracle.adfnmc.el.utils.BeanResolver.         Add this java class as a managed bean: Go to your task flow, select the Overview tab at the bottom and go to the Managed Bean section.  Add an entry and name your new Managed Bean and point to the java class you just created.        Add your custom methods and properties to your java class   Since reflection is not supported in the J2ME version on some platforms (BlackBerry), you need to provide dispatch code if you want to invoke/access any of your methods/properties from EL.  Here's a sample:  MyBeanClass.java    Use Expression Language (EL) to access your properties and invoke your methods on your MCX pages.  Here's an sample:     <?xml version="1.0" encoding="UTF-8" ?><amc:view xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"          xmlns:amc="http://xmlns.oracle.com/jdev/amc">  <amc:form id="form0">    <amc:menuControl refId="menu0"/>    <amc:panelGroupLayout id="panelGroupLayout1" width="100%">      <amc:panelGroupLayout id="panelGroupLayout2" layout="horizontal"                            width="100%">        <amc:image id="image1" source="logo_sm.png"/>        <amc:outputText value="Home" id="outputText1" verticalAlign="center"                        fontSize="20" fontWeight="bold"                        foregroundColor="#ff0000"/>      </amc:panelGroupLayout>      <amc:commandLink text="#{MyBean.property1}" id="commandLink1"                       actionListener="#{MyBean.doFoo}"                       foregroundColor="#0000ff" action="patientlist"/>    </amc:panelGroupLayout>  </amc:form>  <amc:menu type="main" id="menu0">    <amc:menuGroup id="menuGroup1">      <amc:commandMenuItem id="commandMenuItem1" action="exit" label="Exit"                           index="1" weight="0"/>    </amc:menuGroup>  </amc:menu></amc:view> 

  Read the article

• EC2 Configuration

  - by user123683

  I am trying to create a server structure for my EC2 account. The design I have chosen consists of 2 instances running in different availability zones, elastic load balancer, an auto-scaling group with cloudwatch monitoring configured and a security group defining rules for access to the instances. This setup is to support an online web application written in PHP. I am trying to decide what is a better policy: Store MySQL DB on a separate Instance Store MySQL DB on an attached EBS volume (from what i know auto-scaling will not replicate the attached EBS volume but will generate new instances from a chosen AMI - is this view correct?) Regards the AMI I plan to use a basic Amazon linux 64 bit AMI, and install bastille (maybe OSSEC) but I am looking to also use an encrypted file system. Are there any issues using an encrypted file system and communication between the DB and webapp i neeed to be aware of? Are there any comms issues using the encrypted filesystem on the instance housing the webapp I was going to launch a second instance or attach a second volume in the second availability zone to act as a standby for the database - I'm just looking for some suggestions about how to get the two DB's to talk - will this be a big task Regards updates for security is it best to create a recent snapshot and just relaunch and allow Amazon to install updates on launch or is the yum update mechanism a suitable alternative - is it better practice to relaunch instead of updates being installed which force a restart. I plan to create two AMI snapshots one for the app server and one for the DB each with the same security measures in place - is this a reasonable - I just figure it is a better policy than having additional applications that are unnecessary included in a AMI that I intend on using. My plan for backup is to create periodic snapshots of the webapp and DB instances (if I use an additional EBS volume instead of separate instances my understanding is that the EBS volume will persist in S3 storage in the event of an unexpected termination and I can create snapshots of the volume backup purposes). Thanks in advance for suggestions and advice. I am new to EC2 and I may have described unnecessary overkill but I want to try implement what can be considered a best practice solution so all advice is appreciated.

  Read the article

• ReadyBoost in Windows 7

  - by Robert Koritnik

  I've bought an SD card today for my phot frame, but when I inserted it into my notebook I saw I could use it for ReadyBoost. Some background I'm a .net developer, using VMs and developing web applications (and Sharepoint). I use an HP notebook machine with Core 2 Duo 2GHz + 4GB RAM + 320 7200 HD. I simultaneously run Visual Studio 2010 with some plugins SQL Server Firefox with at least 10 tabs Chrome with about 5 tabs IIS VM with Server 2008 machine Sharepoint and occasionally also Photoshop and some InDesign as well. So I don't let my machine have a break. :D Question If I buy myself some really fast SDHC card (like SanDisk 16GB Extreme 30MB/s - is there anything faster) and use it with my Windows 7 ReadyBoost, will I see any performance gain? Is it going to work something similar to Seagate's HybridDrive Momentus with 4GB of solid state drive? What could I actually expect if I do put this card into my machine? And what would be recommended size? Observations I guess redirecting page file to it would speed up the system. Some VM machines on it would probably run faster as well because they could run parallel to HD host system I guess. Am I right or wrong?

  Read the article

• supervisord launches with wrong setuid

  - by friendzis

  I am trying to test a pilot system with nginx connecting to uwsgi served application controlled by supervisord running on ubuntu-server. Application is written in python with Flask in virtualenv, although I'm not sure if that is relevant. To test the system I have created a simple hello world with flask. I want nginx and uwsgi both to run as www-data user. If I launch uwsgi "manually" from root shell I can see uwsgi processes runing as appropriate user (www-data). Although, if I let supervisor launch the application something strange happens - uwsgi processes are runing under my user (friendzis). Consequently, socket file gets created under wrong user and nginx cannot communicate with my applicaion. note: the linux server runs as Hyper-V VM, under Windows Server 2008. Relevant configuration: [uwsgi] socket = /var/www/sockets/cowsay.sock chmod-socket = 666 abstract-socket = false master = true workers = 2 uid = www-data gid = www-data chdir = /var/www/cowsay/cowsay pp = /var/www/cowsay/cowsay pyhome = /var/www/cowsay module = cowsay callable = app supervisor [program:cowsay] command = /var/www/cowsay/bin/uwsgi -s /var/www/sockets/cowsay.sock -w cowsay:app directory = /var/www/cowsay/cowsay user = www-data autostart = true autorestart = true stdout_logfile = /var/www/cowsay/log/supervisor.log redirect_stderr = true stopsignal = QUIT I'm sure I'm missing some minor detail, but I'm unable to notice it. Would appreciate any suggestions.

  Read the article

• Erase just the free space on my hard drive

  - by Patriot

  I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

  Read the article

• How do I install the main repositories for RHEL6

  - by eisaacson

  We've setup RHEL6 on a new server. As far as we can tell, our subscription is all setup properly. However, when I run yum repolist, it doesn't show any repositories. /etc/yum.repos.d/redhat.repo is empty. I tried pasting in the content from another RHEL6 server's redhat.repo but as soon as I run yum, it wipes it out again. I just need to get the basic RedHat repositories setup so I can install packages. EDIT: Using the GUI, I went to System Administration Red Hat Subscription Manager. Under the 'Products' tab, it did not show any products. EDIT: When I run yum update, here's what I get: # yum update Loaded plugins: product-id, refresh-packagekit, security, subscription-manager This system is receiving updates from Red Hat Subscription Management. Setting up Update Process No Packages marked for Update When I log in to RedHat customer portal, it shows that subscription as active. EDIT: To make sure I wasn't having a subscription issue. I re-registered and re-subscribed. I get all the same results. # subscription-manager register --force # subscription-manager subscribe --pool=*redacted* EDIT: contents of /etc/yum.conf [main] cachedir=/var/cache/yum/$basearch/$releasever keepcache=0 debuglevel=2 logfile=/var/log/yum.log exactarch=1 obsoletes=1 gpgcheck=1 plugins=1 installonly_limit=3 contents of /etc/yum/pluginconf.d/rhnplugin.conf: [main] enabled = 0 gpgcheck = 1

  Read the article

• How do I fix a custom Event Viewer Log that merges automatically with the Application log?

  - by NightOwl888

  I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

  Read the article

• Task Manager Does Not Start Every Time

  - by diek

  I have had a problem that started some time ago, 6 months maybe. I should have noted the first instance but I didn't. I am using Windows 7 Pro, 32bit. Under normal circumstances I can open up the the Task Manager, via the task bar or cntrl alt del. When I get a program stuck, causing a freeze or non-responsive system I try to open the task manager. It will not work. I have had plenty of similar problems in the past and I had no trouble getting it open. I have searched the internet but the only results I can find are when the task manager will not start under any situation. I am running ESET NOD32 as the anti-virus. The latest example happened when I opened a new tab in Google and tried to copy an image. Google accounts for at least 50% of the examples. Ran System File Checker tool, sfc /scannow as recommended on another post. No errors returned. Any guidance would be appreciated.

  Read the article

• Computer loses all installed programs and appears to return OS-only state

  - by Jake

  This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

  Read the article

• Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

  - by Deniz

  It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• NTBackup Error: C: is not a valid drive

  - by Chris

  I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• SSRS 2005 inaccessible after install

  - by Gabriel Guimarães

  Hi I've just installed SQL 2005 and Database Engine is ok, however I can't access it for nothing. When I go to http://localhost/reports I get this prompt for a username and password and it fails with 401.1. When I tried to disable kerberos on the virtual directories, nothing changed. I've tried changing the auth to anonymous and get: Internet Explorer cannot display the webpage. When I access from another machine, I get the prompt only once and get this error. Internet Explorer cannot display the webpage. Can't access this with IE or SSMS 2005. If I try to access with Management Studio i get this error: TITLE: Microsoft SQL Server Management Studio The underlying connection was closed: An unexpected error occurred on a receive. (Microsoft.SqlServer.Management.UI.RSClient) ADDITIONAL INFORMATION: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System) An existing connection was forcibly closed by the remote host (System) BUTTONS: OK By the way the server info: its a Win 2003 R2 Standard with IIS 6 Can't seem to understand this. Does anyone have a hint?

  Read the article

• How to deal with lots of brackets in a formula?

  - by wenlibin02

  Say, I have a formula like this (in LaTeX or Maple or other text system): Result: ((6*(k2+k3))*A123*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*(exp(-k3*(k3^2*t-x)))^2+6*A12*(-k3+k2)*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*exp(-k3*(k3^2*t-x)))*(exp(-k2*(k2^2*t-x)))^2+(-(6*(-k3+k2))*A13*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*(exp(-k3*(k3^2*t-x)))^2-(6*(k2+k3))*k2*k3*(A12*A13*k2^2-2*A12*A13*k2*k3+A12*A13*k3^2-A123*k2^2-2*A123*k2*k3-A123*k3^2)*exp(-k3*(k3^2*t-x)))*exp(-k2*(k2^2*t-x)) Note: the above formula is only one part of the result of a maple calculation, I just can't break them up because there are so many many terms. Apparently, It's very hard to read. What I want to do is to fold the matched brackets level by level. If all the brackets are folded, I can find out clearly how many terms there are. Then I can analyze from the top level to the details of every term. But I just don't know how to realize that. Maybe there are some existed software which can visualize this kind of complex formula. Any idea? P.S. I use Linux system. The open source alternatives are better.

  Read the article

• Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

  - by Kairan

  Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

  Read the article

• How can a Postfix/Dovecot(ssl)/Apache/Roundcube(non-ssl) setup leak email addresses?

  - by Jens Björnhager

  I have a linux box email server with Postfix as the MTA, Dovecot as the IMAP server and Apache with Roundcube as webmail. In my /etc/postfix/aliases I have just above a hundred different aliases which makes as many email addresses on my domain. I use one address per website so I easily can shut down spam infested addresses. During the half a year or so that I have had this setup, I have received 3 spam from 2 sources. As I know exactly where I entered this address, it should be easy to pinpoint email leaking websites and services. However, these sources are, according to me, not likely email sellers. And for one of them to sell my email twice? I contacted one of the sources and they are adamant that their system is tight. They suggested the possibility that it is my server that is doing the leaking. So, my question is: How likely is it that my box is leaking email addresses, and how? I don't store fully qualified email addresses anywhere in my system except in my maildir. I use SSL connection to IMAP I do not use https on webmail

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

< Previous Page | 767 768 769 770 771 772 773 774 775 776 777 778  | Next Page >