Search Results

Search found 40915 results on 1637 pages for 'virtual method'.

Page 773/1637 | < Previous Page | 769 770 771 772 773 774 775 776 777 778 779 780  | Next Page >

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• Arraylist is null; I cannot access books in the arraylist

  - by user3701380

  I am a beginner-intermediate java programmer and I am getting a null pointer exception from my arraylist. I am writing a bookstore program for APCS and when i add the book, it is supposed to add to the arraylist in the inventory class. But when i call a method to search for a book (e.g. by title), it shows that there isn't anything in the arraylist. //Here is my inventory class -- it has all methods for adding the book or searching for one The searching methods are in getBookByTitle, getBookByAuthor, and getBookByISBN and the method for adding a book is addBook package webbazonab; //Inventory Class //Bharath Senthil //Ansh Sikka import java.util.ArrayList; public class Inventory{ private ArrayList<Book> allBooks = new ArrayList<Book>(); private String bookTitles; private String bookAuthors; private String bookPrices; private String bookCopies; private String ISBNs; public Inventory() { } //@param double price, int copies, String bookTitle, String Author, String isbnNumber public void addBooks(Book addedBook){ allBooks.add(addedBook); } public boolean isAvailable(){ for(Book myBook : allBooks){ if(myBook.copiesLeft() == 0) return false; } return true; } public String populateTitle(){ for (Book titleBooks : allBooks){ bookTitles = titleBooks.getTitle() + "\n"; return bookTitles; } return bookTitles; } public String populateAuthor(){ for(Book authorBooks : allBooks){ bookAuthors = authorBooks.getAuthor() + "\n"; return bookAuthors; } return bookAuthors; } public String populatePrice(){ for (Book pricedBooks : allBooks){ bookPrices = String.valueOf(pricedBooks.getPrice()) + "\n"; } return "$" + bookPrices; } /** * * @return */ public String populateCopies(){ for (Book amtBooks : allBooks){ bookCopies = String.valueOf(amtBooks.copiesLeft()) + "\n"; return bookCopies; } return bookCopies; } public String populateISBN(){ for (Book isbnNums : allBooks){ ISBNs = isbnNums.getIsbn() + "\n"; return ISBNs; } return ISBNs; } @SuppressWarnings("empty-statement") public Book getBookByTitle(String titleSearch) { for(Book titleBook : allBooks) { if (titleBook.getTitle().equals(titleSearch)) { return titleBook; } } return null; } public Book getBookByISBN(String isbnSearch){ for(Book isbnBookSearches : allBooks){ if(isbnBookSearches.getIsbn().equals(isbnSearch)){ return isbnBookSearches; } } return null; } public Book getBookByAuthor(String authorSearch){ for(Book authorBookSearches : allBooks){ if(authorBookSearches.getAuthor().equals(authorSearch)){ return authorBookSearches; } } return null; } public void sort(){ for(int i = 0; i < allBooks.size(); i++) { for(int k = 0; k < allBooks.size(); k++) { if(((Book) allBooks.get(i)).getIsbn().compareTo(((Book) allBooks.get(k)).getIsbn()) < 1) { Book temp = (Book) allBooks.get(k); allBooks.set(k, allBooks.get(i)); allBooks.set(i, temp); } else if(((Book) allBooks.get(i)).getIsbn().compareTo(((Book) allBooks.get(k)).getIsbn()) > 1) { Book temp = (Book) allBooks.get(i); allBooks.set(i, allBooks.get(k)); allBooks.set(k, temp); } } } } public ArrayList<Book> getBooks(){ return allBooks; } } //The exception occurs when i call the method here (in another class): Inventory lib = new Inventory(); jTextField12.setText(lib.getBookByAuthor(authorSearch).getTitle()); Here is my book class if you need it package webbazonab; //Webbazon AB //Project By: Ansh Sikka and Bharath Senthil public class Book { private double myPrice; private String myTitle; private String bookAuthor; private String isbn; private int myCopies; public Book(double price, int copies, String bookTitle, String Author, String isbnNumber) { myPrice = price; myCopies = copies; myTitle = bookTitle; bookAuthor = Author; isbn = isbnNumber; } public double getPrice() { return myPrice; } public String getIsbn() { return isbn; } public String getTitle() { return myTitle; } public String getAuthor() { return bookAuthor; } public int copiesLeft(){ return myCopies; } public String notFound(){ return "The book you searched for could not be found!"; } public String toString() { return "Title: " + getTitle() + "\nAuthor: " + getAuthor() + "\nNumber of Available Books: " + copiesLeft() + "\nPrice: $" + getPrice(); } } Thanks!

  Read the article

• Add a private git repository to FishEye

  - by lostInTransit

  Hi I am trying to find some help on the FishEye documentation to help me add a private git repository to it. This is all I can get I can setup a public repository using this method but not able to add a private repository. I believe I need to add some credentials to FishEye for it to be able to access the repo. But where do I add these creds? Can someone please help me out! Thanks.

  Read the article

• Storing member function pointers of derived classes in map

  - by Kiran Mohan

  Hello, I am trying to implement a factory for two classes Circle, Square both of which inherits from Shape. class Shape { public: virtual static Shape * getInstance() = 0; }; class Circle : public Shape { public: static const std::string type; Shape * getInstance() { return new Circle; } }; const std::string Circle::type = "Circle"; class Square : public Shape { public: static const std::string type; Shape * getInstance() { return new Square; } }; const std::string Square::type = "Square"; I want to now create a map with key as shape type (string) and value as a function pointer to getInstance() of the corresponding derived class. Is it possible? Thanks, Kiran

  Read the article

• Zend_Soap_Client doesn't work with proxy

  - by understack

  I'm accessing a SOAP web service like : $wsdl_url = 'http://abslive3.timesgroup.com:8888/clsRSchedule.soap?wsdl' ; $client = new Zend_Soap_Client($wsdl_url, array('proxy_host'=>"http://virtual-browser.25u.com" , 'proxy_port'=>80)); Since my shared server blocks port 8888, I'm using this proxy server. But Zend Soap Client tries to directly connect it. Exception information: Message: SOAP-ERROR: Parsing WSDL: Couldn't load from 'http://abslive3.timesgroup.com:8888/clsRSchedule.soap?wsdl' : failed to load external entity "http://abslive3.timesgroup.com:8888/clsRSchedule.soap?wsdl" Stack trace: #0 /home/..../library/Zend/Soap/Client/Common.php(51): SoapClient->SoapClient('http://abslive3...', Array) #1 /home/..../library/Zend/Soap/Client.php(1024): Zend_Soap_Client_Common->__construct(Array, 'http://abslive3...', Array) #2 /home/..../library/Zend/Soap/Client.php(1180): Zend_Soap_Client->_initSoapClientObject() #3 /home/..../library/Zend/Soap/Client.php(1104): Zend_Soap_Client->getSoapClient() #4 [internal function]: Zend_Soap_Client->__call('ReturnDataSet', Array) What am I doing wrong?

  Read the article

• django username in url, instead of id

  - by dana

  Hello, in a mini virtual community, i have a profile_view function, so that i can view the profile of any registered user. The profile view function has as a parameter the id of the user wich the profile belongs to, so that when i want to access the profile of user 2 for example, i call it like that: http://127.0.0.1:8000/accounts/profile_view/2/ My problem is that i would like to have the username in the url, and NOT the id. I try to modify my code as follows, but it doesn't work still. Here is my code: view: def profile_view(request, user): u = User.objects.get(pk=user) up = UserProfile.objects.get(created_by = u) cv = UserProfile.objects.filter(created_by = User.objects.get(pk=user)) blog = New.objects.filter(created_by = u) replies = Reply.objects.filter(reply_to = blog) vote = Vote.objects.filter(voted=blog) following = Relations.objects.filter(initiated_by = u) follower = Relations.objects.filter(follow = u) return render_to_response('profile/publicProfile.html', { 'vote': vote, 'u':u, 'up':up, 'cv': cv, 'ing': following.order_by('-date_initiated'), 'er': follower.order_by('-date_follow'), 'list':blog.order_by('-date'), 'replies':replies }, context_instance=RequestContext(request)) and my url: urlpatterns = patterns('', url(r'^profile_view/(?P<user>\d+)/$', profile_view, name='profile_view'), thanks in advance!

  Read the article

• Python - Converting CSV to Objects - Code Design

  - by victorhooi

  Hi, I have a small script we're using to read in a CSV file containing employees, and perform some basic manipulations on that data. We read in the data (import_gd_dump), and create an Employees object, containing a list of Employee objects (maybe I should think of a better naming convention...lol). We then call clean_all_phone_numbers() on Employees, which calls clean_phone_number() on each Employee, as well as lookup_all_supervisors(), on Employees. import csv import re import sys #class CSVLoader: # """Virtual class to assist with loading in CSV files.""" # def import_gd_dump(self, input_file='Gp Directory 20100331 original.csv'): # gd_extract = csv.DictReader(open(input_file), dialect='excel') # employees = [] # for row in gd_extract: # curr_employee = Employee(row) # employees.append(curr_employee) # return employees # #self.employees = {row['dbdirid']:row for row in gd_extract} # Previously, this was inside a (virtual) class called "CSVLoader". # However, according to here (http://tomayko.com/writings/the-static-method-thing) - the idiomatic way of doing this in Python is not with a class-fucntion but with a module-level function def import_gd_dump(input_file='Gp Directory 20100331 original.csv'): """Return a list ('employee') of dict objects, taken from a Group Directory CSV file.""" gd_extract = csv.DictReader(open(input_file), dialect='excel') employees = [] for row in gd_extract: employees.append(row) return employees def write_gd_formatted(employees_dict, output_file="gd_formatted.csv"): """Read in an Employees() object, and write out each Employee() inside this to a CSV file""" gd_output_fieldnames = ('hrid', 'mail', 'givenName', 'sn', 'dbcostcenter', 'dbdirid', 'hrreportsto', 'PHFull', 'PHFull_message', 'SupervisorEmail', 'SupervisorFirstName', 'SupervisorSurname') try: gd_formatted = csv.DictWriter(open(output_file, 'w', newline=''), fieldnames=gd_output_fieldnames, extrasaction='ignore', dialect='excel') except IOError: print('Unable to open file, IO error (Is it locked?)') sys.exit(1) headers = {n:n for n in gd_output_fieldnames} gd_formatted.writerow(headers) for employee in employees_dict.employee_list: # We're using the employee object's inbuilt __dict__ attribute - hmm, is this good practice? gd_formatted.writerow(employee.__dict__) class Employee: """An Employee in the system, with employee attributes (name, email, cost-centre etc.)""" def __init__(self, employee_attributes): """We use the Employee constructor to convert a dictionary into instance attributes.""" for k, v in employee_attributes.items(): setattr(self, k, v) def clean_phone_number(self): """Perform some rudimentary checks and corrections, to make sure numbers are in the right format. Numbers should be in the form 0XYYYYYYYY, where X is the area code, and Y is the local number.""" if self.telephoneNumber is None or self.telephoneNumber == '': return '', 'Missing phone number.' else: standard_format = re.compile(r'^\+(?P<intl_prefix>\d{2})\((?P<area_code>\d)\)(?P<local_first_half>\d{4})-(?P<local_second_half>\d{4})') extra_zero = re.compile(r'^\+(?P<intl_prefix>\d{2})\(0(?P<area_code>\d)\)(?P<local_first_half>\d{4})-(?P<local_second_half>\d{4})') missing_hyphen = re.compile(r'^\+(?P<intl_prefix>\d{2})\(0(?P<area_code>\d)\)(?P<local_first_half>\d{4})(?P<local_second_half>\d{4})') if standard_format.search(self.telephoneNumber): result = standard_format.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), '' elif extra_zero.search(self.telephoneNumber): result = extra_zero.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), 'Extra zero in area code - ask user to remediate. ' elif missing_hyphen.search(self.telephoneNumber): result = missing_hyphen.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), 'Missing hyphen in local component - ask user to remediate. ' else: return '', "Number didn't match recognised format. Original text is: " + self.telephoneNumber class Employees: def __init__(self, import_list): self.employee_list = [] for employee in import_list: self.employee_list.append(Employee(employee)) def clean_all_phone_numbers(self): for employee in self.employee_list: #Should we just set this directly in Employee.clean_phone_number() instead? employee.PHFull, employee.PHFull_message = employee.clean_phone_number() # Hmm, the search is O(n^2) - there's probably a better way of doing this search? def lookup_all_supervisors(self): for employee in self.employee_list: if employee.hrreportsto is not None and employee.hrreportsto != '': for supervisor in self.employee_list: if supervisor.hrid == employee.hrreportsto: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = supervisor.mail, supervisor.givenName, supervisor.sn break else: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = ('Supervisor not found.', 'Supervisor not found.', 'Supervisor not found.') else: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = ('Supervisor not set.', 'Supervisor not set.', 'Supervisor not set.') #Is thre a more pythonic way of doing this? def print_employees(self): for employee in self.employee_list: print(employee.__dict__) if __name__ == '__main__': db_employees = Employees(import_gd_dump()) db_employees.clean_all_phone_numbers() db_employees.lookup_all_supervisors() #db_employees.print_employees() write_gd_formatted(db_employees) Firstly, my preamble question is, can you see anything inherently wrong with the above, from either a class design or Python point-of-view? Is the logic/design sound? Anyhow, to the specifics: The Employees object has a method, clean_all_phone_numbers(), which calls clean_phone_number() on each Employee object inside it. Is this bad design? If so, why? Also, is the way I'm calling lookup_all_supervisors() bad? Originally, I wrapped the clean_phone_number() and lookup_supervisor() method in a single function, with a single for-loop inside it. clean_phone_number is O(n), I believe, lookup_supervisor is O(n^2) - is it ok splitting it into two loops like this? In clean_all_phone_numbers(), I'm looping on the Employee objects, and settings their values using return/assignment - should I be setting this inside clean_phone_number() itself? There's also a few things that I'm sorted of hacked out, not sure if they're bad practice - e.g. print_employee() and gd_formatted() both use __dict__, and the constructor for Employee uses setattr() to convert a dictionary into instance attributes. I'd value any thoughts at all. If you think the questions are too broad, let me know and I can repost as several split up (I just didn't want to pollute the boards with multiple similar questions, and the three questions are more or less fairly tightly related). Cheers, Victor

  Read the article

• How to know how many files a process opened efficiently?

  - by Victor Lin

  I knows I can use the command lsof -p xxxx | wc -l to know the count of opened files op a process, it works, but however, it is just too inefficient. I have some server process which have too many socket files, the wc -l method never return the result. So, what is the efficient way to know how many files opened on a process? Thanks.

  Read the article

• Why does my Excel add-in only half work?

  - by Dan Crowther

  I've created an Excel add-in using Visual Studio 2008. It has a ribbon, a bunch of panes and code that adds sheets and ranges and gets information scraped from a web page. When I run it on my dev PC it works perfectly. I used the Publish command to publich it and installed on a Windows XP virtual PC. The installation seemed fine and when I open Excel I see my ribbon. If I click a button that shows a pane, up pops the pane. If I enter some details into the pane that should create a range and populate it with data from a web page, the range is created but the web page is not visited (I have tested that I have connectivity). One of my buttons adds a hidden worksheet and another displays or hides that sheet. One of these buttons is not working. I've tried everything I can think of. I'm wondering if there are any permissions or trust issues I need to deal with?

  Read the article

• Running BlogEngine.NET with ASP.NET MVC under same website?

  - by Raj Aththanayake

  Hi Can anyone please help me with this? I have a Windows 2008 server and MVC 2.0 site is hosted under IIS 7.0 root directory. The site works fine. I want to use the BlogEngine.NET with my site. For example if my mite name is http:// mysite.com (which is the root of IIS) and the blog should be http://mysite.com/blog/Default.aspx Is this possible? Can I create a sub virtual directory within my root (where the MVC 2 app is hosted) and run the ASP.NET BlogEngine.Net in it? Any ideas appreciated.

  Read the article

• Clustering and DB Replication in virtualized (and cloud) environments

  - by devdude

  Both replication and clustering are terms for servers setups with physical (real) servers, usually implemented on a DB or AS level. Now the question: In a virtualized environment with "easy" scalable servers (touching clustering) and a higher availability (DB replication) through the means of high availability of the virtual server by the cloudserver provider, do we really need replication and clustering (as in covering the problems of traditional servers) ? Question is asked from a soultion/application provider viewpoint. Please exclude the need of replication with a business requirement background, eg. the need to replicate a DB at 2 different geographical locations to ensure performance and data. Thanks for your insights !

  Read the article

• Why packets injected with libpcap are duplicated?

  - by r0u1i

  I'm using sharppcap in order to send packets as part of a monitoring system. Usually it works well but I've encountered the strangest bug on a hosted vista machine and I would like your help. On that virtual vista machine, injected packets are duplicated. That is, if I send a ping request using libpcap, it somehow gets duplicated and I get two requests on the destination machine. The two requests are almost identical byte-wise, and the only difference between them is that the second packet's TTL field is one minus the original packet's value. Using wireshark I can see the packet gets duplicated before it (and its clone) leave the vista machine. The problem is manifested even when using other tools for injecting packets using libpcap (namely PlayCap). Any ideas?

  Read the article

• Drag and Drop text - What am I missing?

  - by Harvey

  I am trying to add drag-and-drop text to my Doc-View App. I added the COleDropTarget variable to the view class, registered it in OnCreate(). I added OnDragEnter(), OnDragOver(), OnDragLeave() and OnDrop() to that class as virtual overrides, but none of them are ever called. I previously had added m_pMainWnd-DragAcceptFiles(TRUE); to my App class. I tried commenting out that statement, but no affect. I tried using Spy++ to see where the messages go while I do a drag, but it logs nothing at all while I am dragging the text around in the App. What do I need? Or what else can I try, to narrow down the problem? TIA, Harvey

  Read the article

• MySQLdb not INSERTING, _mysql does fine.

  - by Mad_Casual

  Okay, I log onto the MySQL command-line client as root. I then open or otherwise run a python app using the MySQLdb module as root. When I check the results using python (IDLE), everything looks fine. When I use the MySQL command-line client, no INSERT has occurred. If I change things around to _mysql instead of MySQLdb, everything works fine. I'd appreciate any clarification(s). "Works" until IDLE/Virtual machine is reset: <pre><code>import MySQLdb db = MySQLdb.connect(user='root', passwd='*******',db='test') cursor = db.cursor() cursor.execute("""INSERT INTO test VALUES ('somevalue');""",)</code></end> Works: <pre><code>import _mysql db = _mysql.connect(user='root', passwd='*******',db='test') db.query("INSERT INTO test VALUES ('somevalue');")</code></end> System info: Intel x86 WinXP Python 2.5 MySQL 5.1.41 MySQL-Python 1.2.2

  Read the article

• Why is this default template parameter not allowed?

  - by Matt Joiner

  I have the following class: template <typename Type = void> class AlignedMemory { public: AlignedMemory(size_t alignment, size_t size) : memptr_(0) { int iret(posix_memalign((void **)&memptr_, alignment, size)); if (iret) throw system_error("posix_memalign"); } virtual ~AlignedMemory() { free(memptr_); } operator Type *() const { return memptr_; } Type *operator->() const { return memptr_; } //operator Type &() { return *memptr_; } //Type &operator[](size_t index) const; private: Type *memptr_; }; And attempt to instantiate an automatic variable like this: AlignedMemory blah(512, 512); This gives the following error: src/cpfs/entry.cpp:438: error: missing template arguments before ‘buf’ What am I doing wrong? Is void not an allowed default parameter?

  Read the article

• Dns caching for sockets

  - by Poma

  I'm connecting to some websites through socks proxy server. In my case its very good to implement dns cache, so proxy don't need to resolve website's ip address. So, I performed DNS lookup, but don't know where to supply IP address. mySocket.Connect uses proxy's ip address so it isn't right place. I tried to place it in http header GET http://11.22.33.44/index.html HTTP/1.1 - this doesn't work (even in browser) since website is on virtual hosting. It seems that Host header is right place for resolved ip address. Am I right? Will proxy resolve host name (since it's still there in GET header) or not?

  Read the article

• Protect video with password

  - by Ruben

  Are they any method to protect video files with password, so player will ask for the pasword before playback? Currently I am protecting private video files using zip compression with password but it is very inconvenient. I am forced to uncompress huge files each time before watching, and than erase it using special utilities (to avoid further restoring). Please advice.

  Read the article

• NHibernate Validator - how to validate enum type

  - by Herr W.

  I'm using nhibernate validator in my current solution. Everythings is almost fine but... My view model has a property of type Gender (see example below) public virtual Gender Gender { get; set; } public enum Gender { Female = 1, Male = 2 } Now i like to have some validation to ensure that the gender property ist set. But neither the NotEmpty nor the NotNull Attribute fulfil the requirement. Is there a kind of a generic solution or best practice to handle enum validations. Thanks in advance.

  Read the article

• Install ssh support in CVSNT in Cent OS ?

  - by AlfaTeK

  I have a CentOS box where I installed cvsnt ( 2.5.03 (Scorpio) Build 2382) but now I'm trying to access a server with the SSH protocol (:ssh:) and it tells me that " the :ssh: access method is not available on this system" How can I install the support to ssh? (following some tutorials I have the $CVS_RSH configured to point to ssh executable file)

  Read the article

• Web hosting colo stack, what do i need

  - by james

  I'm looking to colocate a website, obviously running a few apache servers, mysql cluster, SAN servers and load balancer. What else do I need to protect the servers and what would be the best method for DNS as all the web side of things will be in the colo centre and email hosted with another company? Thanks in advance

  Read the article

• Android:Android SDK and AVD Manager doesn't launch after did SDK upgrade?

  - by user187532

  Hi folks, I have Android development eclipse setup on Mac OS X. I recently did Android SDK upgrade from 1.5 to available versions such as 1.6, 2.0.1 and 2.1 and docs. After did upgrade, automatically restarted my Macbook and installed all new versions. After this, when i try to launch "Windows-Android SDK and AVD Manager", it doesn't launch at all. What might be the reason? Does anyone has the solution? The reason why i'm trying to launch Android SDK and AVD Manager is, i need to add new Android virtual device(avd) target for 2.0.1 and 2.1 versions, for that i'm trying to launch Android SDK and AVD Manager. Thank you in advance for your suggestions.

  Read the article

• Linux 'compose' key sequence extensions

  - by o_O Tync

  Compose key is a great way way to write all these ©–®—… stuff. It's really MUCH more handy than the windows "alt+0169" method. Is there a way to define additional sequences? E.g. I'd like to have "Compose+--" result in "?"

  Read the article

• Redirect Using htaccess

  - by manyxcxi

  I am trying to redirect /folder to / using .htaccess but all am I getting is the Apache HTTP Server Test Page. My root directory looks like this: / .htaccess -/folder -/folder2 -/folder3 My .htaccess looks like this: RewriteEngine On RewriteCond %{REQUEST_URI} !^/folder/ RewriteRule ^(.*)$ folder/$1 [L] What am I doing wrong? I checked my httpd.conf (I'm running Centos 5.3) and the mod_rewrite library is being loaded. As a side note, my server is not a www server, its simply a virtual machine so its hostname is centosvm. Addition: I have found that the mod_rewrite module is loaded, but none of my .htaccess redirects seem to be working.

  Read the article

• Windows 2008 IIS 7.0 HTTP to HTTPS Redirect -- Versus IIS 6.0 Mechanism

  - by Dan7el

  This topic, creating a mechanism for redirection from HTTP to HTTPS on a Windows 2008 server running IIS 7.0 is a much written-about topic on the Internet. How this is done is really not so much my issue. My issue is more of explaining why this can't be done with the standard HTTP Redirect module that ships with Windows 2008 IIS 7.0. Instead, there are other methods needed that are more arduous. First, the IIS 6.0 method requires no externally available modules nor does it require any additional modifications to the web.config or any type of other development effort. It's outlined here: http://blogs.microsoft.co.il/blogs/dorr/archive/2009/01/13/how-to-force-redirection-from-http-to-https-on-iis-6-0.aspx And, you can see the basic steps are to run the snap-in, get the properties on the site, and do some modifications. Presto, you have the HTTP -- HTTP redirect setup. Now, on the IIS 7.0 platform, it doesn't seem this simple. An initial search found the following site: http://www.sslshopper.com/iis7-redirect-http-to-https.html Which has two separate approcates: 1. Involves installing a separately available Microsoft module -- URL Rewrite Module, and then adding XML to the web.config. 2. Custom Error Page. ...there might be other methods, but these are the basic ones and the first is listed as the primary method. But wait...There exists on the IIS 7.0 an HTTP Redirect Module. So...why can't I use the HTTP Redirect Module to do this very thing? This is really my big question. I need to know this because my management is going to insist I use the HTTP Redirect Module and set up the HTTP to HTTPS redirect in a similar fashion to how we do in IIS 6.0. Can someone please explain to me, in clean, simple, easy to understand, terms that both I and my management can understand as to why I need to go get the URL Rewrite Module and install that on the server and make the web.config changes suggested by the article instead of simply using the HTTP Redirect module that's already installed on the site? Thanks a bunch.

  Read the article

• how to remove or change background fills in all tables in a microsoft word document

  - by PA.

  I have a bunch of large documents, with many tables that have different and inconsistent fill styles - some of them are not readable in black and white when printed. I cannot change the background fill for all the tables at once. The problem I have is that when I open such a document, and Select All, the Table Properties are inactive. Do you know a technique for selecting all the tables, or a method for applying global format of tables, with a script or some other way?

  Read the article

< Previous Page | 769 770 771 772 773 774 775 776 777 778 779 780  | Next Page >