Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 778/837 | < Previous Page | 774 775 776 777 778 779 780 781 782 783 784 785  | Next Page >

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• Oracle Spatial and Graph – A year in review

  - by Mandy Ho

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} What a great year for Oracle Spatial! Or shall I now say, Oracle Spatial and Graph, with our official name change this summer. There were so many exciting events and updates we had this year, and this blog will review and link to some of the events you may have missed over the year. We kicked off 2012 with our webinar: Situational Analysis at OnStar with Oracle Spatial and Graph. We collaborated with OnStar’s Emergency Strategy and Outreach expert, Jeff Joyner ,on how Onstar uses Google Earth Visualization, NAVTEQ data and Oracle Database to deliver fast, accurate emergency services to its customers. In the next webinar in our 2012 series, Oracle partner TARGUSinfo showcased how to build a robust, scalable and secure customer relationship management systems – with built-in mapping and spatial analysis, and deployed in the cloud. This is a very cool system using all Oracle technologies including Oracle Database and Fusion Middleware MapViewer. Attendees learned how to gather market insight, score prospects and customers and perform location analysis. The replay is available here. Our final webinar of the year focused on using Oracle Business Intelligence tools, along with Oracle Spatial and Graph to perform location-aware predictive analysis. Watch the webcast here: In June, we joined up with the Location Intelligence conference in Washington, DC, and had a very successful 2012 Oracle Spatial User Conference. Customers and partners from the US, as well as from EMEA and Asia, flew in to share experiences and ideas, and get technical updates from Oracle experts. Users were excited to hear about spatial-Exadata performance, and advances in MapViewer and BI. Peter Doolan of Oracle Public Sector kicked off the event with a great keynote, and US Census, NOAA, and Ordnance Survey Great Britain were just a few of the presenters. Presentation archive here. We recognized some of the most exceptional partners and customers for their contributions to advancing mainstream solutions using geospatial technologies. Planning for 2013’s conference has already started. Please contribute your papers for consideration here. http://www.locationintelligence.net/ We also launched a new Oracle PartnerNetwork Spatial Specialization – to enable partners to get validated in the marketplace for their expertise in taking solutions to market. Individuals can also get individual certifications. Learn more here. Oracle Open World was not to disappoint, with news regarding our next Oracle Spatial and Graph release, as well as the announcement of our new Oracle Spatial and Graph SIG board! Join the SIG today. One more exciting event as we look to 2013. Spatial and location technologies have a dedicated track at the January BIWA SIG Summit – on January 9-10 in Redwood Shores, CA. View the agenda and register here: www.biwasummit.org. We thank you for all your support during the year of 2012 and look towards an even more exciting 2013! Wishing you and your family a prosperous New Year and Happy Holidays!

  Read the article

• disks not ready in array causes mdadm to force initramfs shell

  - by RaidPinata

  Okay, this is starting to get pretty frustrating. I've read most of the other answers on this site that have anything to do with this issue but I'm still not getting anywhere. I have a RAID 6 array with 10 devices and 1 spare. The OS is on a completely separate device. At boot only three of the 10 devices in the raid are available, the others become available later in the boot process. Currently, unless I go through initramfs I can't get the system to boot - it just hangs with a blank screen. When I do boot through recovery (initramfs), I get a message asking if I want to assemble the degraded array. If I say no and then exit initramfs the system boots fine and my array is mounted exactly where I intend it to. Here are the pertinent files as near as I can tell. Ask me if you want to see anything else. # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions # CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Tue, 13 Nov 2012 13:50:41 -0700 # by mkconf $Id$ ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae Here is fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sdc2 during installation UUID=3fa1e73f-3d83-4afe-9415-6285d432c133 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdc3 during installation UUID=c4988662-67f3-4069-a16e-db740e054727 none swap sw 0 0 # mount large raid device on /data /dev/md0 /data ext4 defaults,nofail,noatime,nobootwait 0 0 output of cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sda[0] sdd[10](S) sdl[9] sdk[8] sdj[7] sdi[6] sdh[5] sdg[4] sdf[3] sde[2] sdb[1] 23441080320 blocks super 1.2 level 6, 512k chunk, algorithm 2 [10/10] [UUUUUUUUUU] unused devices: <none> Here is the output of mdadm --detail --scan --verbose ARRAY /dev/md0 level=raid6 num-devices=10 metadata=1.2 spares=1 name=Craggenmore:data UUID=37eea980:24df7b7a:f11a1226:afaf53ae devices=/dev/sda,/dev/sdb,/dev/sde,/dev/sdf,/dev/sdg,/dev/sdh,/dev/sdi,/dev/sdj,/dev/sdk,/dev/sdl,/dev/sdd Please let me know if there is anything else you think might be useful in troubleshooting this... I just can't seem to figure out how to change the boot process so that mdadm waits until the drives are ready to build the array. Everything works just fine if the drives are given enough time to come online. edit: changed title to properly reflect situation

  Read the article

• Oracle Fusion Supply Chain Management (SCM) Designs May Improve End User Productivity

  - by Applications User Experience

  By Applications User Experience on March 10, 2011 Michele Molnar, Senior Usability Engineer, Applications User Experience The Challenge: The SCM User Experience team, in close collaboration with product management and strategy, completely redesigned the user experience for Oracle Fusion applications. One of the goals of this redesign was to increase end user productivity by applying design patterns and guidelines and incorporating findings from extensive usability research. But a question remained: How do we know that the Oracle Fusion designs will actually increase end user productivity? The Test: To answer this question, the SCM Usability Engineers compared Oracle Fusion designs to their corresponding existing Oracle applications using the workflow time analysis method. The workflow time analysis method breaks tasks into a sequence of operators. By applying standard time estimates for all of the operators in the task, an estimate of the overall task time can be calculated. The workflow time analysis method has been recently adopted by the Applications User Experience group for use in predicting end user productivity. Using this method, a design can be tested and refined as needed to improve productivity even before the design is coded. For the study, we selected some of our recent designs for Oracle Fusion Product Information Management (PIM). The designs encompassed tasks performed by Product Managers to create, manage, and define products for their organization. (See Figure 1 for an example.) In applying this method, the SCM Usability Engineers collaborated with Product Management to compare the new Oracle Fusion Applications designs against Oracle’s existing applications. Together, we performed the following activities: Identified the five most frequently performed tasks Created detailed task scenarios that provided the context for each task Conducted task walkthroughs Analyzed and documented the steps and flow required to complete each task Applied standard time estimates to the operators in each task to estimate the overall task completion time Figure 1. The interactions on each Oracle Fusion Product Information Management screen were documented, as indicated by the red highlighting. The task scenario and script provided the context for each task.  The Results: The workflow time analysis method predicted that the Oracle Fusion Applications designs would result in productivity gains in each task, ranging from 8% to 62%, with an overall productivity gain of 43%. All other factors being equal, the new designs should enable these tasks to be completed in about half the time it takes with existing Oracle Applications. Further analysis revealed that these performance gains would be achieved by reducing the number of clicks and screens needed to complete the tasks. Conclusions: Using the workflow time analysis method, we can expect the Oracle Fusion Applications redesign to succeed in improving end user productivity. The workflow time analysis method appears to be an effective and efficient tool for testing, refining, and retesting designs to optimize productivity. The workflow time analysis method does not replace usability testing with end users, but it can be used as an early predictor of design productivity even before designs are coded. We are planning to conduct usability tests later in the development cycle to compare actual end user data with the workflow time analysis results. Such results can potentially be used to validate the productivity improvement predictions. Used together, the workflow time analysis method and usability testing will enable us to continue creating, evaluating, and delivering Oracle Fusion designs that exceed the expectations of our end users, both in the quality of the user experience and in productivity. (For more information about studying productivity, refer to the Measuring User Productivity blog.)

  Read the article

• Additional new material WebLogic Community

  - by JuergenKress

  Virtual Developer Conference On Demand - Register Updated Book: WebLogic 12c: Distinctive Recipes - Architecture, Development, Administration by Oracle ACE Director Frank Munz - Blog | YouTube Webcast: Migrating from GlassFish to WebLogic - Replay Reliance Commercial Finance Accelerates Time-to-Market, Improves IT Staff Productivity by 70% - Blog | Oracle Magazine Retrieving WebLogic Server Name and Port in ADF Application by Andrejus Baranovskis, Oracle Ace Director - Blog Using Oracle WebLogic 12c with NetBeans IDEOracle ACE Director Markus Eisele walks you through installing and configuring all the necessary components, and helps you get started with a simple Hello World project. Read the article. Video: Oracle A-Team ADF Mobile Persistence SampleThis video by Oracle Fusion Middleware A-Team architect Steven Davelaar demonstrates how to use the ADF Mobile Persistence Sample JDeveloper extension to generate a fully functional ADF Mobile application that reads and writes data using an ADF BC SOAP web service. Watch the video. Java ME 8 ReleaseDownload Java ME today! This release is an implementation of the Java ME 8 standards JSR 360 (CLDC 8) and JSR 361 (MEEP 8), and includes support of alignment with Java SE 8 language features and APIs, an enhanced services-enabled application platform, the ability to "right-size" the platform to address a wide range of target devices, and more. Learn more Download Java ME SDK 8It includes application development support for Oracle Java ME Embedded 8 platforms and includes plugins for NetBeans 8. See the Java ME 8 Developer Tools Documentation to learn JavaOne 2014 Early Bird RateRegister early to save $400 off the onsite price. With the release of Java 8 this year, we have exciting new sessions and an interactive demo space! NetBeans IDE 8.0 Patch UpdateThe NetBeans Team has released a patch for NetBeans IDE 8.0. Download it today to get fixes that enhance stability and performance. Java 8 Questions ForumFor any questions about this new release, please join the conversation on the Java 8 Questions Forum. Java ME 8: Getting Started with Samples and Demo CodeLearn in few steps how to get started with Java ME 8! The New Java SE 8 FeaturesJava SE 8 introduces enhancements such as lambda expressions that enable you to write more concise yet readable code, better utilize multicore systems, and detect more errors at compile time. See What's New in JDK 8 and the new Java SE 8 documentation portal. Pay Less for Java-Related Books!Save 20% on all new Oracle Press books related to Java. Download the free preview sampler for the Java 8 book written by Herbert Schildt, Maurice Naftain, Henrik Ebbers and J.F. DiMarzio. New book: EJB 3 in Action, Second Edition WebLogic 12c Does WebSockets Getting Started by C2B2 Video: Building Robots with Java Embedded Video: Nighthacking TV Watch presentations by Stephen Chin and community members about Java SE, Java Embedded, Java EE, Hadoop, Robots and more. Migrating the Spring Pet Clinic to Java EE 7 Trip report : Jozi JUG Java Day in Johannesburg How to Build GlassFish 4 from Source 4,000 posts later : The Aquarium WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Production Access Denied! Who caused this rule anyways?

  - by Matt Watson

  One of the biggest challenges for most developers is getting access to production servers. In smaller dev teams of less than about 5 people everyone usually has access. Then you hire developer #6, he messes something up in production... and now nobody has access. That is how it always starts in small dev teams. I think just about every rule of life there is gets created this way. One person messes it up for the rest of us. Rules are then put in place to try and prevent it from happening again.Breaking the rules is in our nature. In this example it is for good cause and a necessity to support our applications and troubleshoot problems as they arise. So how do developers typically break the rules? Some create their own method to collect log files off servers so they can see them. Expensive log management programs can collect log files, but log files alone are not enough. Centralizing where important errors are logged to is common. Some lucky developers are given production server access by the IT operations team out of necessity. Wait. That's not fair to all developers and knowingly breaks the company rule!  When customers complain or the system is down, the rules go out the window. Commonly lead developers get production access because they are ultimately responsible for supporting the application and may be the only person who knows how to fix it. The problem with only giving lead developers production access is it doesn't scale from a support standpoint. Those key employees become the go to people to help solve application problems, but they also become a bottleneck. They end up spending up to half of their time every day helping resolve application defects, performance problems, or whatever the fire of the day is. This actually the last thing you want your lead developers doing. They should be working on something more strategic like major enhancements to the product. Having production access can actually be a curse if you are the guy stuck hunting down log files all day. Application defects are good tasks for junior developers. They can usually handle figuring out simple application problems. But nothing is worse than being a junior developer who can't figure out those problems and the back log of them grows and grows. Some of them require production server access to verify a deployment was done correctly, verify config settings, view log files, or maybe just restart an application. Since the junior developers don't have access, they end up bugging the developers who do have access or they track down a system admin to help. It can take hours or days to see server information that would take seconds or minutes if they had access of their own. It is very frustrating to the developer trying to solve the problem, the system admin being forced to help, and most importantly your customers who are not happy about the situation. This process is terribly inefficient. Production database access is also important for solving application problems, but presents a lot of risk if developers are given access. They could see data they shouldn't.  They could write queries on accident to update data, delete data, or merely select every record from every table and bring your database to its knees. Since most of the application we create are data driven, it can be very difficult to track down application bugs without access to the production databases.Besides it being against the rule, why don't all developers have access? Most of the time it comes down to security, change of control, lack of training, and other valid reasons. Developers have been known to tinker with different settings to try and solve a problem and in the process forget what they changed and made the problem worse. So it is a double edge sword. Don't give them access and fixing bugs is more difficult, or give them access and risk having more bugs or major outages being created!Matt WatsonFounder, CEOStackifyAgile Support for Agile Developers

  Read the article

• Detect Unicode Usage in SQL Column

  One optimization you can make to a SQL table that is overly large is to change from nvarchar (or nchar) to varchar (or char).  Doing so will cut the size used by the data in half, from 2 bytes per character (+ 2 bytes of overhead for varchar) to only 1 byte per character.  However, you will lose the ability to store Unicode characters, such as those used by many non-English alphabets.  If the tables are storing user-input, and your application is or might one day be used internationally, its likely that using Unicode for your characters is a good thing.  However, if instead the data is being generated by your application itself or your development team (such as lookup data), and you can be certain that Unicode character sets are not required, then switching such columns to varchar/char can be an easy improvement to make. Avoid Premature Optimization If you are working with a lookup table that has a small number of rows, and is only ever referenced in the application by its numeric ID column, then you wont see any benefit to using varchar vs. nvarchar.  More generally, for small tables, you wont see any significant benefit.  Thus, if you have a general policy in place to use nvarchar/nchar because it offers more flexibility, do not take this post as a recommendation to go against this policy anywhere you can.  You really only want to act on measurable evidence that suggests that using Unicode is resulting in a problem, and that you wont lose anything by switching to varchar/char. Obviously the main reason to make this change is to reduce the amount of space required by each row.  This in turn affects how many rows SQL Server can page through at a time, and can also impact index size and how much disk I/O is required to respond to queries, etc.  If for example you have a table with 100 million records in it and this table has a column of type nchar(5), this column will use 5 * 2 = 10 bytes per row, and with 100M rows that works out to 10 bytes * 100 million = 1000 MBytes or 1GB.  If it turns out that this column only ever stores ASCII characters, then changing it to char(5) would reduce this to 5*1 = 5 bytes per row, and only 500MB.  Of course, if it turns out that it only ever stores the values true and false then you could go further and replace it with a bit data type which uses only 1 byte per row (100MB  total). Detecting Whether Unicode Is In Use So by now you think that you have a problem and that it might be alleviated by switching some columns from nvarchar/nchar to varchar/char but youre not sure whether youre currently using Unicode in these columns.  By definition, you should only be thinking about this for a column that has a lot of rows in it, since the benefits just arent there for a small table, so you cant just eyeball it and look for any non-ASCII characters.  Instead, you need a query.  Its actually very simple: SELECT DISTINCT(CategoryName)FROM CategoriesWHERE CategoryName <> CONVERT(varchar, CategoryName) Summary Gregg Stark for the tip. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Mastering snow and Java development at jDays in Gothenburg

  - by JavaCecilia

  Last weekend, I took the train from Stockholm to Gothenburg to attend and present at the new Java developer conference jDays. It was professionally arranged in the Swedish exhibition hall close to the amusement park Liseberg and we got a great deal out of the top-level presenters and hallway discussions. Understanding and Improving Your Java Process Our main purpose was to spread information on JVM and our monitoring tools for Java processes, so I held a crash course in the most important terms and concepts if you want to affect the performance of your Java process. From the beginning - the JVM specification to interpretation of heap usage graphs. For correct analysis, you also need to understand something about process memory - you need space for the Java heap (-Xms for initial size and -Xmx for max heap size), but the process memory also contain the thread stacks (to a size of -Xss), JVM internal data structures used for keeping track of Java objects on the heap, method compilation/optimization, native libraries, etc. If you get long pause times, make sure to monitor your application, see the allocation rate and frequency of pause times.My colleague Klara Ward then held a presentation on the Java Mission Control product, the profiling and diagnostics tools suite for HotSpot, coming soon. The room was packed and very appreciated, Klara demonstrated four different scenarios, e.g. how to diagnose and fix latencies due to lock contention for logging.My German colleague, OpenJDK ambassador Dalibor Topic travelled to Sweden to do the second keynote on "Make the Future Java". He let us in on the coming features and roadmaps of Java, now delivering major versions on a two-year schedule (Java 7 2011, Java 8 2013, etc). Also letting us in on where to download early versions of 8, to report problems early on. Software Development in teams Being a scout leader, I'm drilled in different team building and workshop techniques, creating strong groups - of course, I had to attend Henrik Berglund's session on building successful teams. He spoke about the importance of clear goals, autonomy and agreed processes. Thomas Sundberg ended the conference by doing live remote pair programming with Alex in Rumania and a concrete tips for people wanting to try it out (for local collaboration, remember to wash and change clothes). Memory Master Keynote The conference keynote was delivered by the Swedish memory master Mattias Ribbing, showing off by remembering the order of a deck of cards he'd seen once. He made it interactive by forcing the audience to learn a memory mastering technique of remembering ten ordered things by heart, asking us to shout out the order backwards and we made it! I desperately need this - bought the book, will get back on the subject. Continuous Delivery The most impressive presenter was Axel Fontaine on Continuous Delivery. Very well prepared slides with key images of his message and moved about the stage like a rock star. The topic is of course highly interesting, how to create an infrastructure enabling immediate feedback to developers and ability to release your product several times per day. Tomek Kaczanowski delivered a funny and useful presentation on good and bad tests, providing comic relief with poorly written tests and the useful rules of thumb how to rewrite them. To conclude, we had a great time and hope to see you at jDays next year :)

  Read the article

• Planning in the Cloud - For Real

  - by jmorourke

  One of the hottest topics at Oracle OpenWorld 2012 this week is “the cloud”.  Over the past few years, Oracle has made major investments in cloud-based applications, including some acquisitions, and now has over 100 applications available through Oracle Cloud services.  At OpenWorld this week, Oracle announced seven new offerings delivered via the Oracle Cloud services platform, one of which is the Oracle Planning and Budgeting Cloud Service.  Based on Oracle Hyperion Planning, this service is the first of Oracle’s EPM applications to be to be offered in the Cloud.    This solution is targeted to organizations that are struggling with spreadsheets or legacy planning and budgeting applications, want to deploy a world class solution for financial planning and budgeting, but are constrained by IT resources and capital budgets. With the Oracle Planning and Budgeting Cloud Service, organizations can fast track their way to world-class financial planning, budgeting and forecasting – at cloud speed, with no IT infrastructure investments and with minimal IT resources. Oracle Hyperion Planning is a market-leading budgeting, planning and forecasting application that is used by over 3,300 organizations worldwide.  Prior to this announcement, Oracle Hyperion Planning was only offered on a license and maintenance basis.  It could be deployed on-premise, or hosted through Oracle On-Demand or third party hosting partners.  With this announcement, Oracle’s market-leading Hyperion Planning application will be available as a Cloud Service and through subscription-based pricing. This lowers the cost of entry and deployment for new customers and provides a scalable environment to support future growth. With this announcement, Oracle is the first major vendor to offer one of its core EPM applications as a cloud-based service.  Other major vendors have recently announced cloud-based EPM solutions, but these are only BI dashboards delivered via a cloud platform.   With this announcement Oracle is providing a market-leading, world-class financial budgeting, planning and forecasting as a cloud service, with the following advantages: ·                     Subscription-based pricing ·                     Available standalone or as an extension to Oracle Fusion Financials Cloud Service ·                     Implementation services available from Oracle and the Oracle Partner Network ·                     High scalability and performance ·                     Integrated financial reporting and MS Office interface ·                     Seamless integration with Oracle and non-Oracle transactional applications ·                     Provides customers with more options for their planning and budgeting deployment vs. strictly on-premise or cloud-only solution providers. The OpenWorld announcement of Oracle Planning and Budgeting Cloud Service is a preview announcement, with controlled availability expected in calendar year 2012.  For more information, check out the links below: Press Release Web site If you have any questions or need additional information, please feel free to contact me at [email protected].

  Read the article

• How do I configure WakeOnUSB properly?

  - by wishi

  How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

  Read the article

• Give a session on C++ AMP – here is how

  - by Daniel Moth

  Ever since presenting on C++ AMP at the AMD Fusion conference in June, then the Gamefest conference in August, and the BUILD conference in September, I've had numerous requests about my material from folks that want to re-deliver the same session. The C++ AMP session I put together has evolved over the 3 presentations to its final form that I used at BUILD, so that is the one I recommend you base yours on. Please get the slides and the recording from channel9 (I'll refer to slide numbers below). This is how I've been presenting the C++ AMP session: Context (slide 3, 04:18-08:18) Start with a demo, on my dual-GPU machine. I've been using the N-Body sample (for VS 11 Developer Preview). (slide 4) Use an nvidia slide that has additional examples of performance improvements that customers enjoy with heterogeneous computing. (slide 5) Talk a bit about the differences today between CPU and GPU hardware, leading to the fact that these will continue to co-exist and that GPUs are great for data parallel algorithms, but not much else today. One is a jack of all trades and the other is a number cruncher. (slide 6) Use the APU example from amd, as one indication that the hardware space is still in motion, emphasizing that the C++ AMP solution is a data parallel API, not a GPU API. It has a future proof design for hardware we have yet to see. (slide 7) Provide more meta-data, as blogged about when I first introduced C++ AMP. Code (slide 9-11) Introduce C++ AMP coding with a simplistic array-addition algorithm – the slides speak for themselves. (slide 12-13) index<N>, extent<N>, and grid<N>. (Slide 14-16) array<T,N>, array_view<T,N> and comparison between them. (Slide 17) parallel_for_each. (slide 18, 21) restrict. (slide 19-20) actual restrictions of restrict(direct3d) – the slides speak for themselves. (slide 22) bring it altogether with a matrix multiplication example. (slide 23-24) accelerator, and accelerator_view. (slide 26-29) Introduce tiling incl. tiled matrix multiplication [tiling probably deserves a whole session instead of 6 minutes!]. IDE (slide 34,37) Briefly touch on the concurrency visualizer. It supports GPU profiling, but enhancements specific to C++ AMP we hope will come at the Beta timeframe, which is when I'll be spending more time talking about it. (slide 35-36, 51:54-59:16) Demonstrate the GPU debugging experience in VS 11. Summary (slide 39) Re-iterate some of the points of slide 7, and add the point that the C++ AMP spec will be open for other compiler vendors to implement, even on other platforms (in fact, Microsoft is actively working on that). (slide 40) Links to content – see slide – including where all your questions should go: http://social.msdn.microsoft.com/Forums/en/parallelcppnative/threads.   "But I don't have time for a full blown session, I only need 2 (or just 1, or 3) C++ AMP slides to use in my session on related topic X" If all you want is a small number of slides, you can take some from the session above and customize them. But because I am so nice, I have created some slides for you, including talking points in the notes section. Download them here. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• I am not able to delete a corrupt NTFS partition on my pen drive. How can I force its deletion?

  - by yesuraj

  I formatted my 16GB pen drive with the NTFS file system in windows vista. After that I started copying some files. However, only a few files were copied to the pen drive before the copy operation hung. So I cancelled the copy operation. Now I am unable to use the pen drive. I DON'T REALLY NEED ANY FILES THAT I COPIED TO THE PENDRIVE. I JUST WANT TO USE THE PENDRIVE AGAIN. I have tried using Ubuntu to format the pen drive. But when i use fdisk to delete the partition, it looks like it is working fine but in fact it does not delete the partition. Also I am unable to format it with any other file system. When I tried to use gparted, it throws the following error: Error mounting: mount exited with exit code 14: The disk contains an unclean file system(0,0). The file system wasn't safely closed on window. Fixing ntfs_attr_pread_i:ntfs_pread failed: Input/output error Failed to read NTFS$Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a softRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into windows twice. The usage of the /f parameter is very important!. If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the dmraid documentation for more details When I searched the Internet I found help on how to recover. But I don’t want to recover, I want to format it again. When I pressed w after deleting the partition, it took more time than previously. After that i removed the pen drive and re-inserted, but the partition I had deleted was still present. If I simply type the command fdisk /dev/sdb without removing the pen drive after the partition is deleted, then it returns the error message Unable to open /dev/sdb. Here are the steps that I followed: root@yesuraj-ubuntu:~# fdisk /dev/sdb Command (m for help): d Selected partition 1 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks THE DEMESG PRINTS ARE AS FOLLOWS, [ 6139.774753] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6154.816941] usb 2-1.3: device descriptor read/64, error -110 [ 6169.968908] usb 2-1.3: device descriptor read/64, error -110 [ 6170.158427] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6185.200638] usb 2-1.3: device descriptor read/64, error -110 [ 6200.352572] usb 2-1.3: device descriptor read/64, error -110 [ 6200.542093] usb 2-1.3: reset high speed USB device number 4 using ehci_hcd [ 6205.559460] usb 2-1.3: device descriptor read/8, error -110 I used the dd command and it erased the partition table. But now when I connect the pen drive, dmesg contains this error message: [88143.437001] sdb: unknown partition table. I am not able to create a partion using fdisk /dev/sdb. The error message says that it is unable to find the node. Other messages from dmesg follow below. [87100.531596] usb 2-1.3: new high speed USB device number 39 using ehci_hcd [87130.915257] usb 2-1.3: new high speed USB device number 40 using ehci_hcd [87135.932647] usb 2-1.3: device descriptor read/8, error -110

  Read the article

• Heterogeneous Datacenter Management with Enterprise Manager 12c

  - by Joe Diemer

  The following is a Guest Blog, contributed by Bryce Kaiser, Product Manager at Blue MedoraWhen I envision a perfect datacenter, it would consist of technologies acquired from a single vendor across the entire server, middleware, application, network, and storage stack - Apps to Disk - that meets your organization’s every IT requirement with absolute best-of-breed solutions in every category.   To quote a familiar motto, your datacenter would consist of "Hardware and Software, Engineered to Work Together".  In almost all cases, practical realities dictate something far less than the IT Utopia mentioned above.   You may wish to leverage multiple vendors to keep licensing costs down, a single vendor may not have an offering in the IT category you need, or your preferred vendor may quite simply not have the solution that meets your needs.    In other words, your IT needs dictate a heterogeneous IT environment.  Heterogeneity, however, comes with additional complexity. The following are two pretty typical challenges:1) No End-to-End Visibility into the Enterprise Wide Application Deployment. Each vendor solution which is added to an infrastructure may bring its own tooling creating different consoles for different vendor applications and platforms.2) No Visibility into Performance Bottlenecks. When multiple management tools operate independently, you lose diagnostic capabilities including identifying cross-tier issues with database, hung-requests, slowness, memory leaks and hardware errors/failures causing DB/MW issues. As adoption of Oracle Enterprise Manager (EM) has increased, especially since the release of Enterprise Manager 12c, Oracle has seen an increase in the number of customers who want to leverage their investments in EM to manage non-Oracle workloads.  Enterprise Manager provides a single pane of glass view into their entire datacenter.  By creating a highly extensible framework via the Oracle EM Extensibility Development Kit (EDK), Oracle has provided the tooling for business partners such as my company Blue Medora as well as customers to easily fill gaps in the ecosystem and enhance existing solutions.  As mentioned in the previous post on the Enterprise Manager Extensibility Exchange, customers have access to an assortment of Oracle and Partner provided solutions through this Exchange, which is accessed at http://www.oracle.com/goto/emextensibility.  Currently, there are over 80 Oracle and partner provided plug-ins across the EM 11g and EM 12c versions.  Blue Medora is one of those contributing partners, for which you will find 3 of our solutions including our flagship plugin for VMware.  Let's look at Blue Medora’s VMware plug-in as an example to what I'm trying to convey.  Here is a common situation solved by true visibility into your entire stack:Symptoms•    My database is bogging down, however the database appears okay internally.  Maybe it’s starved for resources?•    My OS tooling is showing everything is “OK”.  Something doesn’t add up. Root cause•    Through the VMware plugin we can see the problem is actually on the virtualization layer Solution•    From within Enterprise Manager  -- the same tool you use for all of your database tuning -- we can overlay the data of the database target, host target, and virtual machine target for a true picture of the true root cause. Here is the console view: Perhaps your monitoring conditions are more specific to your environment.  No worries, Enterprise Manager still has you covered.  With Metric Extensions you have the “Next Generation” of User-Defined Metrics, which easily bring the power of your existing management scripts into a single console while leveraging the proven Enterprise Manager framework. Simply put, Oracle Enterprise manager boasts a growing ecosystem that provides the single pane of glass for your entire datacenter from the database and beyond.  Bryce can be contacted at [email protected]

  Read the article

• Best triple head display setup

  - by dgel

  I'm currently running Ubuntu 12.04 with a darn good triple head display setup. I've got a VisionTek 900530 Radeon HD 5450 512MB DDR3 PCI Express video card that has two DVI outputs and one Mini DisplayPort that I have connected to a HDMI adapter. I'm running three identical Asus 1920x1080 monitors that each have a DVI, VGA, and HDMI input. I'm using the xorg-edgers ppa, so I'm using the open source radeon driver version 6.99.99. I tried using the ATI binary fglrx driver, but I wasn't able to get the three monitors working properly- the monitor connected via HDMI / DisplayPort wouldn't run at full resolution. The setup is almost perfect: Compiz runs fine and is quite snappy. I'm not able to use that great compiz feature where you can drag a window to the side of a display and it will half maximize. I occasionally experience display corruption weirdness with Unity and need to restart it. When I use a dropdown menu in LibreOffice it often pops the menu down in another window. For example, if I'm using the center monitor and click the Insert menu, the menu pulls down on the monitor to my right, forcing me to chase it. If I chase down the menu and choose Manual Break, the dialog appears over on my left monitor. This absurdity is mildly entertaining but has lost its novelty. I've decided to build a new system and have spared no expense- latest i7 processor, SSD, etc. I really like the performance of the Nvidia binary drivers, so I put two ZOTAC ZT-40707-10L GeForce GT 440 in the system, figuring I'd have four DVI outputs and an awesome triple (or even eventually quad) head setup. Unfortunately it appears that I didn't do sufficient research before my purchase. It seems that Nvidia TwinView only supports two monitors on one card (I guess that's why they call it TwinView...). I messed around with running two X servers, but I really don't want that- being able to drag windows to any monitor is critical. It doesn't sound like Xinerama is an option because from what I understand it simply doesn't support Compiz. I've seen a BaseMosaic option that can be used with the Nvidia drivers that appears to support an almost unlimited number of heads- unfortunately me cheap little cards don't support it. I'm also not sure whether you'll still have all nice maximizing and snapping that TwinView provides, or whether Ubuntu will only see it as one massive display. I put my old trusty ATI card into my new system and installed 12.10. I'm using the opensource radeon drivers again because even in 12.10 I can't get the fglrx binary drivers to do triple head. Unfortunately, even with an unbelievably powerful system the experience is extremely sluggish (much more so than my experience in 12.04). The menu scattering problem appears to be fixed, but I get a lot of nasty Unity display corruption. So finally, my question is this: What hardware / drivers should I use? I'm willing to buy (almost) any video card(s). I have two PCI-Express 3.0 slots on my motherboard (which has an integrated Intel HD card). I'm willing to use ATI or Nvidia cards and willing to run Ubuntu 12.04.1 or 12.10. I'm not a gamer, but do want beautiful and snappy Compiz effects. Does anyone out there have the perfect triple head setup in 12.04 or 12.10? What hardware / drivers are you using? I have those two Nvidia cards but will probably be returning them unless someone knows a way to use them together for a triple head setup. Since I'm having pretty good luck with a single ATI card providing three displays, should I just buy a beefier one with the hopes that it will fix the horrible sluggishness I'm experiencing in 12.10?

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• Multithreading 2D gravity calculations

  - by Postman

  I'm building a space exploration game and I've currently started working on gravity ( In C# with XNA). The gravity still needs tweaking, but before I can do that, I need to address some performance issues with my physics calculations. This is using 100 objects, normally rendering 1000 of them with no physics calculations gets well over 300 FPS (which is my FPS cap), but any more than 10 or so objects brings the game (and the single thread it runs on) to its knees when doing physics calculations. I checked my thread usage and the first thread was killing itself from all the work, so I figured I just needed to do the physics calculation on another thread. However when I try to run the Gravity.cs class's Update method on another thread, even if Gravity's Update method has nothing in it, the game is still down to 2 FPS. Gravity.cs public void Update() { foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { Vector2 Force = new Vector2(); foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { if (e2.Key != e.Key) { float distance = Vector2.Distance(entityEngine.Entities[e.Key].Position, entityEngine.Entities[e2.Key].Position); if (distance > (entityEngine.Entities[e.Key].Texture.Width / 2 + entityEngine.Entities[e2.Key].Texture.Width / 2)) { double angle = Math.Atan2(entityEngine.Entities[e2.Key].Position.Y - entityEngine.Entities[e.Key].Position.Y, entityEngine.Entities[e2.Key].Position.X - entityEngine.Entities[e.Key].Position.X); float mult = 0.1f * (entityEngine.Entities[e.Key].Mass * entityEngine.Entities[e2.Key].Mass) / distance * distance; Vector2 VecForce = new Vector2((float)Math.Cos(angle), (float)Math.Sin(angle)); VecForce.Normalize(); Force = Vector2.Add(Force, VecForce * mult); } } } entityEngine.Entities[e.Key].Position += Force; } } Yeah, I know. It's a nested foreach loop, but I don't know how else to do the gravity calculation, and this seems to work, it's just so intensive that it needs its own thread. (Even if someone knows a super efficient way to do these calculations, I'd still like to know how I COULD do it on multiple threads instead) EntityEngine.cs (manages an instance of Gravity.cs) public class EntityEngine { public Dictionary<string, Entity> Entities = new Dictionary<string, Entity>(); public Gravity gravity; private Thread T; public EntityEngine() { gravity = new Gravity(this); } public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { Entities[e.Key].Update(); } T = new Thread(new ThreadStart(gravity.Update)); T.IsBackground = true; T.Start(); } } EntityEngine is created in Game1.cs, and its Update() method is called within Game1.cs. I need my physics calculation in Gravity.cs to run every time the game updates, in a separate thread so that the calculation doesn't slow the game down to horribly low (0-2) FPS. How would I go about making this threading work? (any suggestions for an improved Planetary Gravity system are welcome if anyone has them) I'm also not looking for a lesson in why I shouldn't use threading or the dangers of using it incorrectly, I'm looking for a straight answer on how to do it. I've already spent an hour googling this very question with little results that I understood or were helpful. I don't mean to come off rude, but it always seems hard as a programming noob to get a straight meaningful answer, I usually rather get an answer so complex I'd easily be able to solve my issue if I understood it, or someone saying why I shouldn't do what I want to do and offering no alternatives (that are helpful). Thank you for the help!

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

  Read the article

• Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

  - by Jackson Taylor

  I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

  Read the article

• Strategies for invoking subclass methods on generic objects

  - by Brad Patton

  I've run into this issue in a number of places and have solved it a bunch of different ways but looking for other solutions or opinions on how to address. The scenario is when you have a collection of objects all based off of the same superclass but you want to perform certain actions based only on instances of some of the subclasses. One contrived example of this might be an HTML document made up of elements. You could have a superclass named HTMLELement and subclasses of Headings, Paragraphs, Images, Comments, etc. To invoke a common action across all of the objects you declare a virtual method in the superclass and specific implementations in all of the subclasses. So to render the document you could loop all of the different objects in the document and call a common Render() method on each instance. It's the case where again using the same generic objects in the collection I want to perform different actions for instances of specific subclass (or set of subclasses). For example (an remember this is just an example) when iterating over the collection, elements with external links need to be downloaded (e.g. JS, CSS, images) and some might require additional parsing (JS, CSS). What's the best way to handle those special cases. Some of the strategies I've used or seen used include: Virtual methods in the base class. So in the base class you have a virtual LoadExternalContent() method that does nothing and then override it in the specific subclasses that need to implement it. The benefit being that in the calling code there is no object testing you send the same message to each object and let most of them ignore it. Two downsides that I can think of. First it can make the base class very cluttered with methods that have nothing to do with most of the hierarchy. Second it assumes all of the work can be done in the called method and doesn't handle the case where there might be additional context specific actions in the calling code (i.e. you want to do something in the UI and not the model). Have methods on the class to uniquely identify the objects. This could include methods like ClassName() which return a string with the class name or other return values like enums or booleans (IsImage()). The benefit is that the calling code can use if or switch statements to filter objects to perform class specific actions. The downside is that for every new class you need to implement these methods and can look cluttered. Also performance could be less than some of the other options. Use language features to identify objects. This includes reflection and language operators to identify the objects. For example in C# there is the is operator that returns true if the instance matches the specified class. The benefit is no additional code to implement in your object hierarchy. The only downside seems to be the lack of using something like a switch statement and the fact that your calling code is a little more cluttered. Are there other strategies I am missing? Thoughts on best approaches?

  Read the article

• Virtualized data centre&ndash;Part three: Architecture

  - by marc dekeyser

  Having the basics (like discussed in the previous articles) is all good and well, but how do we get started on this?! It can be quite daunting after all!   From my own point of view I can absolutely confirm your worries and concerns, but also tell you that it is not as hard as it seems! Deciding on what kind of motherboard to buy, processor and how much memory is an activity you will spend quite some time doing research on. And that is not even mentioning storage! All in all it comes down to setting you expectations and your budget. Probably adjusting your expectations according to your budget :). Processors As a rule of thumb you want VT-D (virtualization) technology built in to the processor allowing you to have 64 bit machines running on your host. Memory The more the better! If you are building a home lab don’t bother with ECC unless you are going to run machines that absolutely should be on all the time and your comfort depends on it! Motherboard Depends on what you are going to do with storage: If you are going the NAS way then the number of SATA port/RAID capabilities do not really matter. If you decide to have a single server with lots of dedicated storage it obviously matters how much SATA ports you will have, alternatively you could use a RAID controller (but these set you back a pretty penny if you want one. DELL 6i’s are usually available for a good bargain if you can find one!). Easiest is to get one with a built-in graphics card (on-board) as you are just adding more heat, power usage and possible points of failure. Networking Just like your choice of motherboard the networking side tends to depend on how you want to go. A single virtualization  host with local storage can usually get away with having a single network card, a cluster or server which uses iSCSI storage tends to have more than one teamed up :). Storage The dreaded beast from the dark! The horror which lives in the forest! The most difficult decision you are going to make in the building of your lab. Why you might ask? Simple my friend, having the right choice of storage can make or break your virtualization solution. The performance of you storage choice will have an important impact on the responsiveness of your virtual machines and the deployment of new machines. It also makes a run with your budget! If you decide to go the NAS route you will be dropping a lot more money than if you would be having just a bunch of disks sitting in a server and manually distributing the virtual machines over the disks. Platform I’m a Microsoftee so Hyper-V is a dead giveaway for me. If you are interested in using VMware I won’t stop you but the rest of my posts will be oriented on Server 2012 Hyper-V (aka 3.0)! What did I use? Before someone asks me this in the comments I’ll give you a quick run down of what I am using. - Intel 2.4 quad core processors (i something something) - 24 GB DDR3 Memory - Single disk in each server (might look at this as I move the servers to 2012) - Synology DS1812+ NAS - 3 network interfaces where possible - HP1800 procurve managed switch I decided to spring for the NAS as I will also be using it for backups and media storage (which is working out quite nicely with my Xbox 360 I must say). At the time of building my 2 boxes (over a year and a half ago) these set me back about 900 euros each so I can image you can build the same or better for a lower price. Next article will be diagramming what I want to achieve and starting a build on the Hyper V 3.0 cluster!

  Read the article

• Call For Papers Tips and Tricks

  - by speakjava

  This year's JavaOne session review has just been completed and by now everyone who submitted papers should know whether they were successful or not.  I had the pleasure again this year of leading the review of the 'JavaFX and Rich User Experiences' track.  I thought it would be useful to write up a few comments to help people in future when submitting session proposals, not just for JavaOne, but for any of the many developer conferences that run around the world throughout the year.  This also draws on conversations I recently had with various Java User Group leaders at the Oracle User Group summit in Riga.  Many of these leaders run some of the biggest and most successful Java conferences in Europe. Try to think of a title which will sound interesting.  For example, "Experiences of performance tuning embedded Java for an ARM architecture based single board computer" probably isn't going to get as much attention as "Do you like coffee with your dessert? Java on the Raspberry Pi".  When thinking of the subject and title for your talk try to steer clear of sessions that might be too generic (and so get lost in a group of similar sessions).  Introductory talks are great when the audience is new to a subject, but beware of providing sessions that are too basic when the technology has been around for a while and there are lots of tutorials already available on the web. JavaOne, like many other conferences has a number of fields that need to be filled in when submitting a paper.  Many of these are selected from pull-down lists (like which track the session is applicable to).  Check these lists carefully.  A number of sessions we had needed to be shuffled between tracks when it was thought that the one selected was not appropriate.  We didn't count this against any sessions, but it's always a good idea to try and get the right one from the start, just in case. JavaOne, again like many other conferences, has two fields that describe the session being submitted: abstract and summary.  These are the most critical to a successful submission.  The two fields have different names and that is significant; a frequent mistake people make is to write an abstract for a session and then duplicate it for the summary.  The abstract (at least in the case of JavaOne) is what gets printed in the show guide and is typically what will be used by attendees when deciding what sessions to attend.  This is where you need to sell your session, not just to the reviewers, but also the people who you want in your audience.  Submitting a one line abstract (unless it's a really good one line) is not usually enough to decide whether this is worth investing an hour of conference time.  The abstract typically has a limit of a few hundred characters.  Try to use as many of them as possible to get as much information about your session across.  The summary should be different from the abstract (and don't leave it blank as some people do).  This field is where you can give the reviewers more detail about things like the structure of the talk, possible demonstrations and so on.  As a reviewer I look to this section to help me decide whether the hard-sell of the title and abstract will actually be reflected in the final content.  Try to make this comprehensive, but don't make it excessively long.  When you have to review possibly hundreds of sessions a certain level of conciseness can make life easier for reviewers and help the cause of your session. If you've not made many submissions for talks in the past, or if this is your first, try to give reviewers places to find background on you as a presenter.  Having an active blog and Twitter handle can also help reviewers if they're not sure what your level of expertise is.  Many call-for-papers have places for you to include this type of information.  It's always good to have new and original presenters and presentations for conferences.  Hopefully these tips will help you be successful when you answer the next call-for-papers.

  Read the article

• My collection of favourite TFS utilities

  - by Aaron Kowall

  So, you’re in charge of your company or team’s Team Foundation Server.  Wish it was easier to manage, administer, extend?  Well, here are a few utilities that I highly recommend looking at. I’ve recently had need to rebuild my laptop and upgrade my local TFS environment to TFS 2012 Update 1.  This gave me cause to enumerate some of the utilities I like to have on hand. One of the reasons I love to use TFS on projects is that it’s basically a complete ALM toolkit.  Everything from Task Management, Version Control, Build Management, Test Management, Metrics and Reporting are all there ‘in the box’.  However, no matter how complete a product set it, there are always ways to make it better.  Here are a list of utilities and libraries that are pretty generally useful.  this is not intended to be an exhaustive list of TFS extensions but rather a set that I recommend you look at.  There are many more out there that may be applicable in one scenario or another.  This set of tools should work with TFS 2012 or 2010 if you grab the right version. Most of these tools (and more) are available from the Visual Studio Gallery or CodePlex. General TFS Power Tools – This is ‘the’ collection of utilities and extensions delivered by the Product Group.  Highly recommended from here are the Best Practice Analyzer for ensuring your TFS implementation is healthy and the Team Foundation Server Backups to ensure your TFS databases are backed up correctly. TFS Administrators Toolkit – helps make updates to work item types and reports across many team projects.  Also provides visibility of disk usage by finding large files in version control or test attachments to assist in managing storage utilization. Version Control Git-TF - a set of cross-platform, command line tools that facilitate sharing of changes between TFS and Git. These tools allow a developer to use a local Git repository, and configure it to share changes with a TFS server.  Great for all Git lovers who must integrate into a TFS repository. Testing TFS 2012 Tester Power Tool – A utility for bulk copying test cases which assists in an approach for managing test cases across multiple releases.  A little plug that this utility was written and maintained by Anna Russo of Imaginet where I also work. Test Scribe - A documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc. Reporting Community TFS Report Extensions - a single repository of SQL Server Reporting Services report for Team Foundation 2010 (and above).  Check out the Test Plan Status report by Imaginet’s Steve St. Jean.  Very valuable for your test managers. Builds TFS Build Manager – A great utility if you are build manager over a complex build environment with many TFS build definitions. Community TFS Build Extensions – contains many custom build activities.  Current release binaries are for TFS 2010 but many of the activities can be recompiled for use with TFS 2012. While compiling this list, I was surprised by the number of TFS utilities and extensions I no longer use/need in TFS 2012 because of the great work by the TFS team addressing many gaps since the 2010 release. Are there any utilities you depend on that I’ve missed?  I’d love to hear about them in the comments!

  Read the article

• The Latest Major Release of AutoVue is Now Available!

  - by Pam Petropoulos

  Click here to read the full press release. To learn more about AutoVue 20.2, check out the What's New in AutoVue 20.2 Datasheet AutoVue 20.2 continues to set the standard for enterprise level visualization with Augmented Business Visualization, a new paradigm which reconciles information and business data from multiple sources into a single view, providing rich and actionable visual decision-making environments. The release also includes; capabilities that enhance end-to-end approval workflow; solutions to visually enable the mobile workforce; and support for the latest manufacturing and high tech formats.     New capabilities in release 20.2 include: ·         Enhancements to the Augmented Business Visualization framework o    Creation of 2D hotspots has been extended in 2D drawings, PDF and image files and can now be defined as regional boxes, rather than just text strings o    New 3D Hotspot links in models and drawings. Parts or components of 3D models can be selected to create hotspot links. ·         Enhanced end-to-end approval workflows with digital stamping and batch stamping improvements ·         Solutions that visually enable the mobile workforce and extend enterprise visualization to mobile devices, including iPads through OVDI (Oracle Virtual Desktop Infrastructure) ·         Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards ·         Timely support for new MCAD, ECAD, and Office formats ·         New 20.2 versions of AutoVue Document Print Services and Integration SDK (iSDK) ·         New Dutch language availability   The press release also contains terrific supporting quotes from AutoVue customers and partners.        “AutoVue’s stamping enhancements will greatly benefit our building permit management processes,” said Ties Kremer, Information Manager, Noordenveld Municipality, Netherlands. “The ability to batch stamp documents will speed up our approval processes, enable us to save time and money, and help us meet our regulatory compliance obligations.”          “AutoVue provides our non-technical teams in marketing and sales with access to customer order requirements and supporting CAD documents and drawings,” said James Lim, Regional Technical Systems Manager at Molex Incorporated. “AutoVue 20.2 has enabled us to refine our quotation process, and reduce order errors.”         “We are excited about our use of AutoVue’s Augmented Business Visualization framework, which will offer Meridian users enhanced access to related technical documentation,” said Edwin van Dijk, Director of Product Management, BlueCielo.  “By including AutoVue’s new regional hotspot capabilities within BlueCielo Meridian Enterprise, the context of engineering information is carried over into the visual representation of complex assets, thereby helping us to improve productivity and operational excellence.”    

  Read the article

• Cant finish upgrade from 11.10 to 12 on VPS based on Parallels Virtuozzo Containers, due to libc6

  - by Carmageddon

  I was stuck with this problem near the end of an upgrade: WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Their suggested stepds dont work on VPS, and after googling, I came up to this: Why did my upgrade to 12.04 fail with "glibc not found" or "libc6" or "requires kernel 2.6.24" error? There is comment by izx which explains my problem and proposes a workaround (might take a while to convince the guys to upgrade the kernel..). However, when I follow his instructions, I get error: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libc-dev-bin libc6 libc6-dev libnih1 Suggested packages: glibc-doc The following packages will be upgraded: libc-dev-bin libc6 libc6-dev libnih1 4 upgraded, 0 newly installed, 0 to remove and 394 not upgraded. 1 not fully installed or removed. Need to get 0 B/7737 kB of archives. After this operation, 233 kB disk space will be freed. Do you want to continue [Y/n]? y locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Preconfiguring packages ... (Reading database ... 35175 files and directories currently installed.) Preparing to replace libc6-dev 2.13-20ubuntu5.2 (using .../libc6-dev_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-20ubuntu5.2 (using .../libc-dev-bin_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-20ubuntu5.2 (using .../libc6_2.15-0ubuntu10.3_amd64.deb) ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory WARNING: init script for samba not found. Stopping some services possibly affected by the upgrade (will be restarted later): cron: stopping...done. WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Processing triggers for man-db ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I also attempted to manually grab the .deb package and install it using dpkg -i, but getting: locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) Even though the file is: libc-bin_2.15-0ubuntu10+openvz0_amd64.deb

  Read the article

< Previous Page | 774 775 776 777 778 779 780 781 782 783 784 785  | Next Page >