Search Results

Search found 4126 results on 166 pages for 'lost'.

Page 78/166 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• Subdomain still times out after being set up a month ago

  - by user8137

  I would like to use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like FTP). We use Network Solutions to house domain.com. We recently added a new IP address to point to www.high-res.domain.com. I gave the IP address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct IP address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:\>ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a CNAME when you look at it. Under the domain it has two entries, one to the subdomain and the other to the website host. Each has separate IP addresses. Is this correct?

  Read the article

• CodePlex Daily Summary for Sunday, November 25, 2012

  CodePlex Daily Summary for Sunday, November 25, 2012Popular ReleasesMath.NET Numerics: Math.NET Numerics v2.3.0: Common: Continued major linear algebra storage rework, in this release focusing on vectors (previous release was on matrices) Static CreateRandom for all dense matrix and vector types Thin QR decomposition (in additin to existing full QR) Consistent static Sample methods for continuous and discrete distributions (was previously missing on a few) Portable build adds support for WP8 (.Net 4.0 and higher, SL5, WP8 and .NET for Windows Store apps) Various bug, performance and usability ...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.1: +2012-11-25 v3.2.1 +????????。 -MenuCheckBox?CheckedChanged??????，??????????。 -???????window.IDS??????????????。 -?????（??TabCollection，ControlBaseCollection）???，????????????????。 +Grid??。 -??SelectAllRows??。 -??PageItems??，?????????????，?????、??、?????。 -????grid/gridpageitems.aspx、grid/gridpageitemsrowexpander.aspx、grid/gridpageitems_pagesize.aspx。 -???????????????????。 -??ExpandAllRowExpanders??，?????????????????（grid/gridrowexpanderexpandall2.aspx）。 -??????ExpandRowExpande...VidCoder: 1.4.9 Beta: Updated HandBrake core to SVN 5079. Fixed crashes when encoding DVDs with title gaps.ZXing.Net: ZXing.Net 0.10.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2521 of the java version windows phone 8 assemblies improvements and fixesCharmBar: Windows 8 Charm Bar for Windows 7: Windows 8 Charm Bar for Windows 7BlackJumboDog: Ver5.7.3: 2012.11.24 Ver5.7.3 (1)SMTP???????、?????????、??????????????????????? (2)?????????、?????????????????????????? (3)DNS???????CNAME????CNAME????????????????? (4)DNS????????????TTL???????? (5)???????????????????????、?????????????????? (6)???????????????????????????????TEncoder: 3.1: -Added: Turkish translation (Translators, please see "To translators.txt") -Added: Profiles are now stored in different files under "Profiles" folder -Added: User created Profiles will be saved in a differen directory -Added: Custom video and audio options to profiles -Added: Container options to profiles -Added: Parent folder of input file will be created in the output folder -Added: Option to use 32bit FFmpeg eventhough the OS is 64bit -Added: New skin "Mint" -Fixed: FFMpeg could not open A...Liberty: v3.4.3.0 Release 23rd November 2012: Change Log -Added -H4 A dialog which gives further instructions when attempting to open a "Halo 4 Data" file -H4 Added a short note to the weapon editor stating that dropping your weapons will cap their ammo -Reach Edit the world's gravity -Reach Fine invincibility controls in the object editor -Reach Edit object velocity -Reach Change the teams of AI bipeds and vehicles -Reach Enable/disable fall damage on the biped editor screen -Reach Make AIs deaf and/or blind in the objec...Umbraco CMS: Umbraco 4.11.0: NugetNuGet BlogRead the release blog post for 4.11.0. Whats new50 bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesGetPropertyValue now returns an object, not a string (only affects upgrades from 4.10.x to 4.11.0) NoteIf you need Courier use the release candidate (as of build 26). The code editor has been greatly improved, but is sometimes problematic in Internet Explorer 9 and lower. Previously it was just disabled for IE and...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.3: Fixed supported files list on open dialog (added .pls and .m3u) Impulse Media Player splash message (can be disabled anyway)WiX Toolset: WiX v3.7 RC: WiX v3.7 RC (3.7.1119.0) provides feature complete Bundle update and reference tracking plus several bug fixes. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/11/20/WiX-v3.7-Release-Candidate-availablePicturethrill: Version 2.11.20.0: Fixed up Bing image provider on Windows 8Excel AddIn to reset the last worksheet cell: XSFormatCleaner.xla: Modified the commandbar code to use CommandBar IDs instead of English names.Json.NET: Json.NET 4.5 Release 11: New feature - Added ITraceWriter, MemoryTraceWriter, DiagnosticsTraceWriter New feature - Added StringEscapeHandling with options to escape HTML and non-ASCII characters New feature - Added non-generic JToken.ToObject methods New feature - Deserialize ISet<T> properties as HashSet<T> New feature - Added implicit conversions for Uri, TimeSpan, Guid New feature - Missing byte, char, Guid, TimeSpan and Uri explicit conversion operators added to JToken New feature - Special case...HigLabo: HigLabo_20121119: HigLabo_2012111 --HigLabo.Mail-- Modify bug fix of ExecuteAppend method. Add ExecuteXList method to ImapClient class. --HigLabo.Net.WindowsLive-- Add AsyncCall to WindowsLiveClient class.SharePoint CAML Extensions: Version 1.1: Beta version! <Membership>, <Today/>, <Now/> and <UserID /> tags are not supported!mojoPortal: 2.3.9.4: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2394-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...Keleyi: keleyi-1.1.0: ????： .NET Framework 4.0 ??：MD5??，?????IP??（??????），????? www.keleyi.com keleyi.codeplex.comHoliday Calendar: Calendar Control: Month navigation introduced.NDateTime: Version 1.0: This is the first releaseNew Projects.NET vFaceWall: .NET vFaceWall is autility script written in asp.net which allows developer to build next generation facebook wall style user profiles for asp.net websites.29th Infantry Division Engineer Corps: Code repository and project management hub for the 29th Infantry Division's Engineer Corps.A.M. Lost: A.M. Lost is game project developed during the GameDevParty Jam 3 event (23-24-25 november 2012).ABAP BLOG MIKE: ABAP blog AgileNETSlayer: Agile.Net Deobfuscator, supports all obfuscation methods.BERP Games: This project site contains XNA game development concepts and software produced by BERP Games.CFileUpload: This project will let you upload files with progress bar, without using Flash, HTML5 or similar technologies that the user's browser might not have. CharmBar: Windows 8 Charm Bar is a application that works just like the Windows 8 CharmBar. The word charmbar, the Windows 8 Logo are trademarks of Microsoft Corporation.Confidentialité des données: Développer une application permettant de faciliter la mise en œuvre, l’utilisation et la gestion de ces outils, en exploitant les API .NET.End of control: Project has not been started yet. Just absorbing attentions.Enhanced XML Search: Easy and fastest methods to manipulate XML Data.Exchange Automatic Replies Administrator: Exchange Automatic Replies Administrator is a PowerShell GUI tool for Helpdesk and Sysadmins to set a users' Out-Of-Office without using the command line.File Explorer for WPF: FileExplorer is a WPF control that's emulate the Windows Explorer, it supports both FIleSystem and non-FileSystem class.ForcePlot: Using brute force, plots any difficult equation even some popular software cannot plot. Currently supports 2D graphs, trigonometric and logarithmic functions.Game Dev: Currently in ideas phaseGroupEmulationEMK11: Discussion and sharing of member data Group Emulation Engineering Mechanical 2011Jenkins CI: Views, Jobs, Build status and color. mvcMusicOnLine: mvcMusicOnLinemy own site project no 1: still testing...Nauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.Noctl Library: Noctl is a C# multiplatform Library.open Archive Mediator: High-performance middle-ware for process historiansOpen Source Game - Prince's Revenge: Open Source Game.PackToKindle: Project allow to send folder content to your kindle. Functionality is the same as the official SendToKindle application, but this project is designed to use froPunkPong: PunkPong is an open source "Pong" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses keyboard or mouse. This cross-platform and cross-browser game was tested under BeOS, Linux, NetBSD, OpenBSD, FreeBSD, Windows and others.Quick Data Processor: A simple and quick data processor for csv files.SFProject: It'll be a game at some pointsilverlight ? flash? policy ??: silverlight? flash? policy socket server? ??Universe.WCF.Behaviors: Universe.WCF.Behaviors provides behaviors: - Easy migration from Remoting - Transparent delivery - Traffic Statistics - WCF Streaming Adaptor for BinaryWriter and TextWriter - etc WowDotNetAPI for Silverlight: Silverlight class library implementation of Briam Ramos World Of Warcraft WowDotNetAPI .NET library on GitHub ( https://github.com/briandek/WowDotNetAPI ) C# .Net library to access the new World of Warcraft Community Platform API.WP7NUMConvert: A really simple project to create a small library for number conversions in multiple formats. Written in VB for Windows PhoneWPF CodeEditor: The Dev Tools project is intended to contain a set of features, tools & controls useful for development purposes.

  Read the article

• Samba new file ownership, permissions configuration

  - by Martin Melka

  I have recently installed Samba on my server. Now I have a question about permissions and how to set it up. Currently I mount the Samba shared drive to my laptop with this line in /etc/fstab: //<host>/share /mnt/melka-server-data/ cifs username=<usrname> password=<passwd> _netdev 0 0 This works, as I can read from the files and create them (as root). The problem is when I want to create files as a regular user. I always get a Permission Denied error. These are ll outputs of the mounted folder: magicmaster@magicmaster-kubuntu:/mnt$ ll total 8 drwxr-xr-x 3 root root 4096 lis 11 14:15 ./ drwxr-xr-x 26 root root 4096 ríj 26 11:01 ../ drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 melka-server-data/ and the inside: magicmaster@magicmaster-kubuntu:/mnt/melka-server-data$ ll total 4 drwxrwxrwx 8 magicmaster magicmaster 0 lis 12 22:12 ./ drwxr-xr-x 3 root root 4096 lis 11 14:15 ../ drwxrwxrwx 5 magicmaster magicmaster 0 lis 12 09:35 downloads/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 28 12:57 lost+found/ drwxrwxrwx 15 magicmaster magicmaster 0 lis 12 09:45 movies/ drwxrwxrwx 2 magicmaster magicmaster 0 lis 1 21:15 newest/ drwxrwxrwx 3 magicmaster magicmaster 0 lis 2 23:14 photos/ drwxrwxrwx 2 magicmaster magicmaster 0 ríj 30 12:44 software/ -rw-r--r-- 1 nobody nogroup 0 lis 12 22:12 zdar I called sudo chown -R magicmaster:magicmaster melka-server-data/ to try and change all the files to belong to me. Then the file zdar was created by magicmaster just by calling touch. I got the Permission Denied, but it was still created, though it belongs to nobody and I can't write into it. When I create a file as root, it still belongs to nobody, but at least I can write into it. What am I missing? I didn't notice anything in Samba config that would be related to this and I don't like the idea of having to log on as root in order to copy files.. Thanks

  Read the article

• Can I host a website on a different address from the webmail?

  - by Andrew

  I have what is to me an unusual situation. I have a client for whom I have built a website which I will be hosting, they have been using their domain name for their email addresses for a long period before I came along so moving their email account to my host would be problematic and building the website with their current host would also be problematic because their host is very restrictive. So to fix this I altered the A record in their existing control panel to point the domain name to my server. As a result I can see the pages that I have created at their domain and they can still access their existing webmail. However, it appears that they are now experiencing problems receiving email so I can only assume my solution was incorrect. What is the correct way to point their domain at my website but keep their webmail with the existing host? EDIT: 25/5/2012 - My client has finally responded to me after changing the MX record on their existing C-Panel. Email to their email address were being bounced back with the error 'no such recipient', so I set up the same email address in the new C-Panel and changed the MX record there to 'Remote mail exchanger' which has stopped the emails bouncing but has apparently lost them in cyperspace! Unfortunately I can't add a new record because this would require a fully qualified domain name and their domain name is of course pointed at our server!

  Read the article

• How to update entity states and animations in a component-based game

  - by mivic

  I'm trying to design a component-based entity system for learning purposes (and later use on some games) and I'm having some troubles when it comes to updating entity states. I don't want to have an update() method inside the Component to prevent dependencies between Components. What I currently have in mind is that components hold data and systems update components. So, if I have a simple 2D game with some entities (e.g. player, enemy1, enemy 2) that have Transform, Movement, State, Animation and Rendering components I think I should have: A MovementSystem that moves all the Movement components and updates the State components And a RenderSystem that updates the Animation components (the animation component should have one animation (i.e. a set of frames/textures) for each state and updating it means selecting the animation corresponding to the current state (e.g. jumping, moving_left, etc), and updating the frame index). Then, the RenderSystem updates the Render components with the texture corresponding to the current frame of each entity's Animation and renders everything on screen. I've seen some implementations like Artemis framework, but I don't know how to solve this situation: Let's say that my game has the following entities. Each entity have a set of states and one animation for each state: player: "idle", "moving_right", "jumping" enemy1: "moving_up", "moving_down" enemy2: "moving_left", "moving_right" What are the most accepted approaches in order to update the current state of each entity? The only thing that I can think of is having separate systems for each group of entities and separate State and Animation components so I would have PlayerState, PlayerAnimation, Enemy1State, Enemy1Animation... PlayerMovementSystem, PlayerRenderingSystem... but I think this is a bad solution and breaks the purpose of having a component-based system. As you can see, I'm quite lost here, so I'd very much appreciate any help.

  Read the article

• Data that has been deleted in P6, how is it updated in Analytics

  - by Jeffrey McDaniel

  In P6 Reporting Database 2.0 the ETL process looked to the refrdel table in the P6 PMDB to determine which projects were deleted. The refrdel table could not be cleared out between ETL runs or those deletes would be lost. After the ETL process is run the refrdel can be cleared out. It is important to keep any purging of the refrdel in a consistent cycle so the ETL process can pick up these deletes and process them accordingly.  In P6 Reporting Database 2.2 and higher the Extended Schema is used as the data source. In the Extended Schema, deleted data is filtered out by the views. The Extended Schema services will handle any interaction with the refrdel table, this concern with timing refrdel cleanup and ETL runs is not applicable as of this release. In the Extended Schema tables (ex. TaskX) there can still be deleted data present. The Extended Schema views join on the primary PMDB tables (ex. Task) and filter out any deleted data.  Any data that was deleted that remains in the Extended Schema tables can be cleaned out at a designated time by running the clean up procedure as documented in the P6 Extended Schema white paper. This can be run occasionally but is not necessary to run often unless large amounts of data has been deleted.

  Read the article

• How to manage drawing loop when changing render targets

  - by George Duckett

  I'm managing my game state by having a base GameScreen class with a Draw method. I then have (basically) a stack of GameScreens that I render. I render the bottom one first, as screens above might not completely cover the ones below. I now have a problem where one GameScreen changes render targets while doing its rendering. Anything the previous screens have drawn to the backbuffer is lost (as XNA emulates what happens on the xbox). I don't want to just set the backbuffer to preserve its contents as I want this to work on the xbox as well as PC. How should I manage this problem? A few ideas I've had: Render every GameScreen to its own render target, then render them all to the backbuffer. Create some kind of RenderAction queue where a game screen (and anything else I guess) could queue something to be rendered to the back buffer. They'd render whatever they wanted to any render target as normal, but if they wanted to render to the backbuffer they'd stick that in a queue which would get processed once all rendertarget rendering was done. Abstract away from render targets and backbuffers and have some way of representing the way graphics flows and transforms between render targets and have something manage/work out the correct rendering order (and render targets) given what rendering process needs as input and what it produces as output. I think each of my ideas have pros and cons and there are probably several other ways of approaching this general problem so I'm interested in finding out what solutions are out there.

  Read the article

• Finding links among many written and spoken thoughts

  - by Peter Fren

  So... I am using a digital voice recorder to record anything I see important, ranging from business to private, from rants to new business ideas. Every finalized idea is one wma-file. I wrote a program to sort the wma-files into folders. From time to time I listen to the wma-files, convert them to text(manually) and insert them into a mindmap with mindmanager, which I sort hierarchically by area and type in turn. This works very well, no idea is being lost, when I am out of ideas for a special topic, I listen to what I said and can get started again. What could a search system look like that finds links between thoughts(written in the mindmap and in the wma files) or in general gives me good search results even when the keyword I searched for is not present but a synonym of it or related topic(for instance flower should output entries containing orchid aswell, even if they contain orchid but not the very keyword flower). I prefer something ready-made but small adjustments to a given system are fine aswell. How would you approach this task?

  Read the article

• Entity Framework and distributed Systems

  - by Dirk Beckmann

  I need some help or maybe only a hint for the right direction. I've got a system that is sperated into two applications. An existing VB.NET desktop client using Entity Framework 5 with code first approach and a asp.net Web Api client in C# that will be refactored right yet. It should be possible to deliver OData. The system and the datamodel is still involving and so migrations will happen in undefined intervalls. So I'm now struggling how to manage my database access on the web api system. So my favourd approch would be us Entity Framework on both systems but I'm running into trouble while creating new migrations. Two solutions I've thought about: Shared Data Access dll The first idea was to separate the data access layer to a seperate project an reference from each of the systems. The context would be the same as long as the dll is up to date in each system. This way both soulutions would be able to make a migration. The main problem ist that it is much more complicate to update a web api system than it is with the client Click Once Update Solution and not every migration is important for the web api. This would couse more update trouble and out of sync libraries Database First on Web Api The second idea was just to use the database first approch an on web api side. But it seems that all annotations will be lost by each model update. Other solutions with stored procedures have been discarded because of missing OData support and maintainability. Does anyone run into same conflicts or has any advices how such a problem can be solved!

  Read the article

• Serious error on first attempts to dual boot Ubuntu 14.04 with Win7

  - by beetle

  I downloaded Ubuntu 14.04 from the website which I saved to my desktop with WinRar. My trial with winrar had expired so I have now tried it with Active@Isoburner but I'm getting no further. I eventually got it burnt onto a DVD(4.7gb) and tried to boot from DVD and normally. Neither way works. It looks like its about to boot but then a message appears saying that a serious error has occurred...the disk drive for /tmp is not ready yet or not present...press I to ignore, s to skip or m for manual... At this point I'm lost and unsure what to do. My laptop Toshiba Equium A210-17I is over 5 or 6 years old. Available space on the Hard Drive is 24gb. 2gb RAM. It originally came with Windows Vista Home Premium edition but about a year ago or more a friend wiped it clean for me as I was having no end of problems with Vista. He installed Windows 7 Ultimate(which I don't have a disc for). How can I resolve this issue and get Ubuntu to boot up? Do I have to install a previous version of Ubuntu first? Any advice or help would be greatly appreciated. Kind regards. Beetle.

  Read the article

• How do I allow e-mail to be relayed through this MTA?

  - by BlueToast

  When I try to send an e-mail using authenticationless relay via telnet, I receive an error message "553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1) rcpt to:[email protected]". How can I allow a specific domain to be whitelisted and allowed through the MTA? There is only one domain I am trying to relay e-mails to (and that domain uses a totally different, independent and standalone mail server with IceWarp). 220 mail4.myhsphere.cc ESMTP ehlo sisterwebsite.com 250-mail4.myhsphere.cc 250-PIPELINING 250-8BITMIME 250-SIZE 41943040 250-AUTH LOGIN PLAIN CRAM-MD5 250 STARTTLS mail from:[email protected] 250 ok rcpt to:[email protected] 553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1) rcpt to:[email protected] 553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1) rcpt to:[email protected] 553 sorry, that domain isn't allowed to be relayed thru this MTA (#5.7.1) rcpt to:[email protected] 250 ok data 354 go ahead To: [email protected] From: [email protected] Subject: Test mail -- please ignore Test, please ignore this Jane Sincerely, BlueToast . 250 ok 1350407684 qp 22451 quit 221 mail4.myhsphere.cc Connection to host lost. C:\Users\genericaccount Not sure what to do. I did some Googling but I'm having a hard time finding relevant results. Most of the search results I get are about trying to receive mail -- but I am trying to send mail. mail.sisterwebsite.com = mail4.myhsphere.com. We use FluidHosting for the e-mail on sisterwebsite.com. (Repeating question just in case) How can I allow a specific domain to be whitelisted and allowed through the MTA?

  Read the article

• How can I pass referrer header from my https domain to http domains?

  - by nutcracker

  My website is 100% https. I have links to other http domains. The referrer header is not set when linking from a https page to a http page. From http://en.wikipedia.org/wiki/HTTP_referrer If a website is accessed from a HTTP Secure (HTTPS) connection and a link points to anywhere except another secure location, then the referer field is not sent. I would prefer that other domains can see the referrer so that they know that traffic comes from my domain. Is there a way to force this header or is there another solution? Update I've done some basic testing using a redirect: http page -- link to http --> 301 redirect --> http page = referrer intact https page -- link to https --> 301 redirect --> http page = referrer blank https page -- link to http --> 301 redirect --> http page = referrer blank https page -- link to http --> 302 redirect --> http page = referrer blank The referrer is lost when linking from a https page to a http redirect page on my own domain. So there is no referrer on the redirect.

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• Biggest mistake you've ever made

  - by Rogue Coder

  Similar to the question I read on Server Fault, what is the biggest mistake you've ever made in an IT related position. Some examples from friends: I needed to do some work on a production site so I decided to copy over the live database to the beta site. Pretty standard, but when I went to the beta site it was still pulling out-of-date info. OOPS! I had copied the beta database over to the live site! Thank god for backups. And for me, I created a form for an event that was to be held during a specific time range. Participants would fill out the form for a chance to win, and we would send the event organizers a CSV from the database. I went into the database, and found ONLY 1 ENTRY, MINE. Upon investigating, it appears as though I forgot an auto increment key, and because of the server setup there was no way to recover the lost data. I am aware this question is similar to ones on Stack Overflow but the ones I found seemed to receive generic answers instead of actual stories :) What is the biggest coding error/mistake ever…

  Read the article

• Upgrading Oracle Siebel CRM Application Without Downtime

  - by Doug Reid

  Oracle’s Siebel Customer Relationship Management (CRM) software helps organizations differentiate their businesses to achieve top- and bottom-line growth. Siebel CRM delivers comprehensive solutions that are tailored to more than 20 different industries. As Siebel CRM implementations have evolved into mission critical, operational business processes that must operate 24/7, companies are finding it increasingly difficult to afford the downtime typically required to perform an in-place upgrade. Without these upgrades, businesses loose out on critical new features and functionality. With Oracle GoldenGate, customers don’t have to choose between upgrades and outages. Oracle GoldenGate allows Siebel CRM customers to perform upgrades with zero downtime. Now Siebel customers can always take advantages of the latest innovations in customer relationship management without having to worry about potential lost revenue due to downtime. Oracle GoldenGate provides three different deployment models for Siebel CRM zero downtime upgrades that are designed to meet differing customer requirements. These range from a basic unidirectional model, which is designed to work out-of-the-box, to the most sophisticated active-active model for phased migrations. If you have mission-critical Siebel CRM implementations I recommend that you watch the screencast below to learn how you can begin taking advantage of all the latest Siebel enhancements without having any downtime. This screencast is also available on Oracle Media Network and Oracle's YouTube channel. For even more details I recommend reading the whitepaper Upgrading Siebel CRM with Zero Downtime .

  Read the article

• How to retain secondary hard drive mounts at reboot and keep shares?

  - by Tom

  I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

  Read the article

• Software development process for a part time University project for 1 developer?

  - by Pricey

  I will be doing a part time University project soon and the time frame for it is around 8 months with approximately 10-15 hours a week spent working on it, with a review by a tutor each quarter. My question is what software development process would you recommend using when the course requires you to work on your own in order to manage yourself as well as the project? I wanted to use a weekly or bi-weekly iterative approach to my work but a lot of the processes seem tailored to teams of people. I am looking at XP (Extreme Programming) OR Scrum as something that is less than the norm for University work but again Scrum I don't know a lot about yet, and a question I have is; can you say you are doing XP without pair-programming? because my tutor seems to think that I have to stick to all the practices otherwise I can't do it (nevermind if I am working alone). We can have external user input as well but due to the small timescales with part time work it may be more beneficial for myself to be the user as well, which is not what I prefer considering how I can get lost in the design.

  Read the article

• Looking for a small, light scene graph style abstraction lib for shader based OpenGL

  - by Pris

  I'm looking for a 'lean and mean' c/c++ scene graph library for OpenGL that doesn't use any deprecated functionality. It should be cross platform (strictly speaking I just dev on Linux so no love lost if it doesn't work on Windows), and it should be possible to deploy to mobile targets (ie OpenGLES2, and no crazy mandatory dependencies that wouldn't port well to modern mobile frameworks like iOS, Android, etc), with a license that's compatible with closed source software (LGPL or more liberal). Specific nice-to-haves would be: Cameras and Viewers (trackball, fly-by, etc) Object transform hierarchies (if B is a child of A, and you move A, B has the same transform applied to it) Simple animation Scene optimization (frustum culling, use VBOs, minimize state changes, etc) Text I've played around with OpenSceneGraph a lot and it's pretty amazing for fixed function pipeline stuff, but I've had a few of problems using it with the programmable pipeline and after going through their mailing list, it seems several people have had similar issues (going back years). Kitware's VES looks neat (http://www.vtk.org/Wiki/VES), but VES + VTK is pretty heavy. VTK is also typically for analyzing scientific data and I've read that it's not that appropriate for a general use case (not that great at rendering a lot of objects on scene,etc) I'm currently looking at VisualizationLibrary (http://www.visualizationlibrary.org/documentation/pag_gallery.html) which looks like it offers some of the functionality I'd like, but it doesn't explicitly support mobile targets. Other solutions like Ogre, Horde3D, Irrlicht, etc tend to be full on game engines and that's not really what I'm looking for. I'd like some suggestions for other libraries that I may have missed... please note I'm not willing to roll my own solution from scratch.

  Read the article

• Google search question, front page not showing...

  - by Catelyn

  I know this is probably a dumb question but I hope someone can give me some insight; I was ranked on Google first page of search results for "funny st patricks day shirts" but I was third from the bottom and not familiar enough with SEO, so I signed up for "Attracta" to rank higher. Big mistake. Since using Attracta, I've lost the first page and I'm now on the fourth page in that search. What I noticed is that Google is now just showing a sub-page or side page, (a link from my front page, to a page which has only a few designs in it) this is not where I would want customers to land first... but my front page is not showing in that search anymore. Obviously, the title of this side page is not geared toward that search result, so I know that's why I have the pr drop. Why is my front page not ranking over that page, though? Why is it apparently gone from that search, or so far back no one will ever find it? I need to know how to fix this quick if anyone has any advice at all for me. It's the busiest season for my website and the people who were stealing design ideas from me are all ranked higher than my site now. (I can prove this, lol) So, I'm very frustrated by that. I would be very grateful to have any advice at all as to what I can do to fix this. THANKS in advance for any advice you can offer. Catelyn

  Read the article

• Working with fubar/refuctored code

  - by Keyo

  I'm working with some code which was written by a contractor who left a year ago leaving a number of projects with buggy, disgustingly bad code. This is what I call cowboy PHP, say no more. Ideally I'd like to leave the project as is and never touch it again. Things break, requirements change and it needs to be maintained. Part A needs to be changed. There is a bug I cannot reproduce. Part A is connect to parts B D and E. This kind of work gives me a headache and makes me die a little inside. It kills my motivation and productivity. To be honest I'd say it's affecting my mental health. Perhaps being at the start of my career I'm being naive to think production code should be reasonably clean. I would like to hear from anyone else who has been in this situation before. What did you do to get out of it? I'm thinking long term I might have to find another job. Edit I've moved on from this company now, to a place where idiots are not employed. The code isn't perfect but it's at least manageable and peer reviewed. There are a lot of people in the comments below telling me that software is messy like this. Sure I don't agree with the way some programmers do things but this code was seriously mangled. The guy who wrote it tried to reinvent every wheel he could, and badly. He stopped getting work from us because of his bad code that nobody on the team could stand. If it were easy to refactor I would have. Eventually after many 'just do this small 10minute change' situations had ballooned into hours of lost time (regardless of who on the team was doing the work) my boss finally caved in it was rewritten.

  Read the article

• Creating a Website Without a Framework [closed]

  - by James Jeffery

  I've been using PHP Frameworks for so long that I've actually forgot the "best practices" for create websites without one. Usually I will use Symfony, or more recently I've been using Laravel. A client wants a very simple website, but with certain parts of it dynamic. Due to the nature of the site using Wordpress, or a Framework, is out of the question. I'm a sucker for priding myself on my code, but I feel like I'm asking such a basic question that it's killing me to ask. But, what are the best practices for creating websites without a Framework? I like to live by the K.I.S.S (Keep It Simple Stupid!) method of thinking. So, my idea was to just create the .php pages that are required, do any page processing or database interaction on that page, then have the HTML below the closing PHP tag. I would have any helpers/functions in a functions.php file. This is what I remember doing way before I was using Frameworks, and to me it seems like a very old school way of doing things. I've not created a site without a Framework for literally 2+ years, so I've lost my way with the basics. Any advice would be greatly appreciated.

  Read the article

• local install of wp site brought down from host - home page is ok but other pages redirect to wamp config page

  - by jeff

  local install of wp site brought down from host - home page is ok but other pages redirect to wamp config page. I got all local files from host to www dir under local wamp. I got database from host and loaded to new local db and used this tool to adjust site_on_web.com to "localhost/site_on_local" now the home page works great and can login to admin page but when click on reservations page and others of site then site just goes to the wamp server config page even though the url shows correctly as localhost/site_on_local/reservations my htaccess file is this # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress and rewrite-module is checked in the php-apache-apache modules setting. now when I uncheck the rewrite-module is checked in the php-apache-apache modules setting or I clear out the whole htaccess file then the pages just goto Not Found The requested URL /ritas041214/about-ritas/ was not found on this server. Please help as I am unsure now about my process to move local site up and down and be able to make it work and without this I am lost...

  Read the article

• Eclipse Java Code Formatter in NetBeans Plugin Manager

  - by Geertjan

  Great news for Eclipse refugees everywhere. Benno Markiewicz forked the Eclipse formatter plugin that I blogged about sometime ago (here and here)... and he fixed many bugs, while also adding new features. It's a handy plugin when you're (a) switching from Eclipse to NetBeans and want to continue using your old formatting rules and (b) working in a polyglot IDE team, i.e., now the formatting rules defined in Eclipse can be imported into NetBeans IDE and everyone will happily be able to conform to the same set of formatting standards. And now you can get it directly from Tools | Plugins in NetBeans IDE 7.4: News from Benno on the plugin, received from him today: The plugin is verified by the NetBeans community and available in the Plugin Manager in NetBeans IDE 7.4 (as shown above) and also at the NetBeans Plugin Portal here, where you can also read quite some info about the plugin:  http://plugins.netbeans.org/plugin/50877/eclipse-code-formatter-for-java The issue with empty undo buffer was solved with the help of junichi11: https://github.com/markiewb/eclipsecodeformatter_for_netbeans/issues/18 The issue with the lost breakpoints remains unsolved and there was no further feedback. That is the main reason why the save action isn't activated by default. See also the open known issues at https://github.com/markiewb/eclipsecodeformatter_for_netbeans/issues?state=open Features are as follows:  Global configuration and project specific configuration.  On save action, which is disabled by default. Show the used formatter as a notification, which is enabled by default.  Finally, Benno testifies to the usefulness, stability, and reliability of the plugin: I use the Eclipse formatter provided by this plugin every day at work. Before I commit, I format the sources. It works and that's it. I am pleased with it. Here's where the Eclipse formatter is defined globally in Tools | Options: And here is per-project configuration, i.e., use the Project Properties dialog of any project to override the global settings:  Interested to hear from anyone who tries the plugin and has any feedback of any kind! 

  Read the article

• Disk Space Full

  - by Loki

  Setting up Ubuntu 10.04 server, the / disk space shows full under df, however the du does not show any of the space used. This has several mounts to Gluster FS'. I have tried a forced FSCK and to no avail. ~# df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 141G 132G 0 100% / none 3.0G 224K 3.0G 1% /dev none 3.0G 0 3.0G 0% /dev/shm none 3.0G 76K 3.0G 1% /var/run none 3.0G 0 3.0G 0% /var/lock none 3.0G 0 3.0G 0% /lib/init/rw /dev/sdb1 9.0T 7.1T 1.9T 80% /brick1 /dev/sdb2 9.0T 7.9T 1.1T 88% /brick2 localhost:/sanvol09 385T 330T 56T 86% /mnt/sanvol09 <- Gluster FS uses local software to contact the DFS I've attempted a tune2fs and same issue arises # du -h --max-depth=1 --one-file-system / 4.0K /selinux 0 /proc 47M /boot 31M /mnt 8.0K /brick1 8.0K /brick2 391M /lib 4.0K /opt 7.4M /bin 0 /sys 379M /var 5.6M /etc 16K /lost+found 43M /root 4.0K /srv 5.7M /home 4.0K /media 7.0M /sbin 0 /dev 4.0K /tmp 4.0K /cdrom 631M /usr 1.6G / more info # df -ih Filesystem Inodes IUsed IFree IUse% Mounted on /dev/md0 9.0M 91K 8.9M 1% / none 746K 770 745K 1% /dev none 747K 1 747K 1% /dev/shm none 747K 32 747K 1% /var/run none 747K 1 747K 1% /var/lock none 747K 3 747K 1% /lib/init/rw /dev/sdb1 583M 1.8M 581M 1% /brick1 /dev/sdb2 583M 1.9M 581M 1% /brick2 localhost:/sanvol09 25G 76M 25G 1% /mnt/sanvol09 The final question: df show's 100% used, and its not, any other known fixes?

  Read the article

• Subdomain still times out after set up a month ago

  - by user8137

  I'm a newbie on this and this has probably been asked already but the subjects online were close but too vague in there answers so I've probably really messed this up. I would really appreciate specific step by step instructions. This is what I'd like to do: use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like ftp). We use Network Solutions to house domain.com. We recently added a new ip address to point to www.high-res.domain.com. I gave the ip address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct ip address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). Tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a Cname when you look at it. Under the Domain it has two entries one to the subdomain and the other to the website host each with separate ip addresses. Is this correct? The website people are too busy on another project to research it further and my friends haven't gotten back to me. Please help. Thanks KK

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >