Search Results

Search found 22471 results on 899 pages for 'firefox os'.

Page 780/899 | < Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >

  • Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

    - by Wolvenmoon
    I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

    Read the article

  • Samba 3.5 Shadow Copy for Windows 7

    - by Prashanth Sundaram
    Over the past several days I have been trying to get the shadow to work with samba but haven’t been successful. Can someone check below config and let me know if I am missing something? We are using Equallogic SAN and iSCSI LUNS to mount volumes. I can cleanly access samba shares on Windows 7 clients but just not shadow copy. I have referred the official how-to but couldn’t get it to work. I see these messages in the logs. Any help is deeply appreciated. [2012/10/31 12:20:53.549863, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. [2012/10/31 12:21:13.887198, 0] modules/vfs_shadow_copy2.c:734(shadow_copy2_get_shadow_copy2_data) shadow:snapdir not found for /fs/test-01 in get_shadow_copy_data [2012/10/31 12:21:13.887265, 0] smbd/nttrans.c:2170(call_nt_transact_ioctl) FSCTL_GET_SHADOW_COPY_DATA: connectpath /fs/test-01, failed. == Samba pkgs == samba-3.5.10-116.el6_2.x86_64 samba-common-3.5.10-116.el6_2.x86_64 samba-winbind-clients-3.5.10-116.el6_2.x86_64 samba-client-3.5.10-116.el6_2.x86_64 === df –h == First is the iSCSI LUN and 2 others are snapshots. /dev/mapper/eql-0-fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01 /dev/mapper/eql-2-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.26-17.32.42/fs/test-01 (SNAPSHOT-1) /dev/mapper/eql-d-0+fs-test01 5.0G 2.3G 2.5G 48% /fs/test-01/@GMT-2012.10.31-11.52.42/fs/test-01 (SNAPSHOT- 2) ===/etc/samba/smb.conf === [global] workgroup = DOMAIN server string = Samba Server Version %v security = ads realm = DOMAIN.CORP encrypt passwords = yes guest account = nobody map to guest = bad uid log file = /var/log/samba/%m.log domain master = no local master = no preferred master = no os level = 0 load printers = no show add printer wizard = no printable = no printcap name = /dev/null disable spoolss = yes follow symlinks = yes wide links = yes unix extensions = no [test] comment = Test Directories path = /fs/test-01 vfs objects = shadow_copy2 #shadow_copy2: sort = desc #shadow: localtime = yes #shadow: snapdir = /fs/test-01/test #shadow: basedir = /fs/test-01 guest ok = yes writeable = yes map archive = no force create mode = 0660 force directory mode = 2770 inherit owner = yes inherit permissions = yes All feedback is welcome. Thanks!

    Read the article

  • Mac Mini server (10.6) behind router with FQDN hostname

    - by thechriskelley
    I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

    Read the article

  • Setting up a Pagefile and Partition in Server 2008

    - by Brett Powell
    I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

    Read the article

  • Change XRDP keyboard layout to en-gb Ubuntu 12.04

    - by Earl Sven
    Does anybody know how to change the keyboard layout to en-gb in an XRDP session on Ubuntu 12.04? I am using mstsc.exe to connect to an XRDP server hosting an XVNC session, however I cannot work out how to apply the UK keyboard layout. A bit of googling has yeilded these instructions which allow me to change the keymap, however using the keymap file I downloaded from here I loose the ability to use the arrow keys, home/end etc. Comparing the file with the standard one there are substantially more differences than I would expect considering the similarity between the layouts. I only have RDP access to the box so i don't seem to be able to actually generate a new layout per the instructions above, maybe it's a local console thing? Also I can't change either the RDP client used or the RDP server as they are my only access to the system, I don't have local console access. I do have root priveleges on the OS however. Any thoughts? Edit: I have found http:// xrdp.sourceforge.net/documents/keymap/newkeymap.html (apologies for not typing the link properly but the antispam filter won't let me post more than 2 links) this documentation on the XRDP sourceforge page which describes keymap file format. It indicates the values in the keymap files are unicode 0x64 etc, however the files I have already on my system seem to use a different format 0:0 or 65307:27 etc, does anybody know what the difference is?

    Read the article

  • Windows 7 on an EEE PC 901 - Is it a practical change?

    - by Dave
    I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

    Read the article

  • New Computer freezing up at random

    - by Benjamin Frost
    Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

    Read the article

  • Networking 2 Virtual PC with one VPC as DHCP server

    - by vivek
    My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

    Read the article

  • Intel z77 vs h77 for intensive compiling, gaming [closed]

    - by Bilal Akhtar
    I'm in the market for a desktop motherboard (preferably ATX) that functions well with Intel i7-3770 Ivy Bridge processor at 3.4 GHz with LGA1155 socket. That processor is very fast, and it should handle all my tasks. My question is about the type of motherboard chipset I should choose to accompany it. I plan to use my rig for compiling and developing Debian package and other OS components, web development, occasional Android apps, chroots, VMs, FlightGear, other gaming but nothing serious, and heavy multitasking, all on Ubuntu. I do NOT plan to overclock, and I never will, so that's not a cause of concern for me. That said, I'm down to three chipset choices: Intel H77 Intel Z68 Intel Z77 I'm planning to go for H77 since I don't need any of the new features in Z77. I don't plan to use a second GPU and I will never overclock my CPU/GPU. My question is, will H77 based MoBos handle all my tasks well? Intel advertises that chipset as "everyday computing" but other sites say it's base functionality is the same as Z77. Intel rather advertises Z77 for "serious multitaskers, hardcore gamers and overclocking enthusiasts". But the problem with all Z77 motherboards I've seen is, they're way too expensive and their main feature seems to be overclocking, which won't be useful to me. Will I lose any raw CPU/GPU performance or HDD R/w with the H77 when comparing it to a Z77? Will heat, etc be an issue too? From what I've seen, Z77 motherboards have larger heat sinks when compared to H77 ones. Will that be an issue too, if I go with an H77 motherboard with no heat sinks for the chipset? The CPU will have a fan in both cases, of course. tl;dr When it comes to CPU/GPU performance and HDD r/w, is the Intel H77 chipset slower than the Z77? I don't care about overclocking or multiple GPUs, and for the processor, I'm set on Ivy Bridge i7-3770.

    Read the article

  • Enabling AHCI in BIOS for SSD

    - by Robert
    I am trying to help a friend with a desktop upgrade. It is an old machine with an Intel DG31 main board. The board has 1 IDE port to which a DVD-ROM drive is connected, and 2 SATA ports. 1 SATA port had a hard drive with XP on it. I have made that the secondary drive now and wiped the OS as requested, so it is just for data. The new SSD has been installed but I read that for best results one must enable AHCI in the BIOS? So I checked and in the BIOS there is a SATA Mode setting with 2 options - Native and Legacy. I think Native means AHCI? After setting to Native, I installed Windows 7 Home Premium and all the latest drivers from Intel's website and all Windows Updates. Now when I check Device Manager I see this: Also Microsoft says HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start and HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV\Start should have value 0 for AHCI but I see that the value is 3 for both. So does this mean that Native mode is not AHCI? Or Windows 7 ignored BIOS setting and installed in IDE mode, maybe because both cables are present? Please help me enable AHCI on this system. Thanks!

    Read the article

  • Using an SSD with no AHCI [ICH7 base] - Windows 7 hangs frequently

    - by h4xnoodle
    I have a Shuttle Intel G31 + ICH7 (base -- not M/R etc) system. I just bought an OCZ Vertex 3 120gb [VTX3-25SAT3-120G] which includes the Sandforce 2218 firmware. The ICH7 does not support AHCI. I understand that this can be a problem. What I don't understand, is if it's necessary to have the proper performance of this drive. I know that without AHCI I may get a limited read/write speed -- this is fine. What my concern is, is the constant freezing/hangs I'm getting with Windows 7 on any disk activity. The 'Highest Active Time' flip-flops from 0 to 100% every minute or so regardless of large or small files. EDIT: The threads/processes with the highest response time is the kernel. I've been reading about other people with Shuttle SG31G2s, and they seem to be using SSDs no problem. Is this the controller's fault? The fact that I do not have AHCI enabled? It makes sense to me that if this SSD requires AHCI features that it would cause Windows to hang, but I would like to fully determine my situation before returning things/reformatting. To initially have my drive recognise the SSD at all, I had to change the BIOS option to Force Gen II instead of Auto for the SATA controller. I then installed Windows with no problem. There were no errors in the event log related to disk usage, but watching the perfmon I could see the highest active time and the processes (usually pagefile.sys being written to, or chrome/firefox caching) which was correlated to the hanging. So now what I need answered is: should I be returning this SSD and getting one with a different controller, or returning the SSD all-together as it will never work out and I will continue to get these hangs. Posts I've read: Windows 7 New SSD SATA AHCI? -- suggests to use AHCI http://forums.anandtech.com/showthread.php?t=2189868 -- Sandforce issues Windows 7 freezes with SSD -- and attached posts Why does my Windows 7 PC / SSD drive keep freezing? -- this is not the controller I have, but still a related issue. Windows 7 hangs after longer inactivity of user -- also tried messing with power settings with no luck. It was already set to 'Never' for turning off HDDs.

    Read the article

  • How can I bridge a VM to a remote network?

    - by asciiphil
    I have a system running QEMU/KVM (via libvirt). One of its VMs needs to have a presence on a subnet that is not local to the VM host. I have a Linux system on the remote subnet. Is there a way to set up some sort of tunneled bridge to cause the VM to appear present on the remote system? This will be a temporary situation (hopefully just until the VM owner can configure their system) and network performance and long-term maintainability aren't really issues. To give some more concrete information: My VM host has IP address 192.168.54.155/24. The VM has IP address 192.168.65.71/24. I have a remote system at 192.168.65.254/24. Both the VM host and remote system are running Scientific Linux 6.5. I do not control the network or routing in between the VM host and remote system. I do not have access to the guest OS on the VM. I would like traffic to the VM's IP address to end up at the VM even though its host isn't directly connected to the appropriate network. I've tried using iproute2's tunnelling, but Linux won't let me add a tunnel to a bridge. I've considered using some sort of iptables mangling to route traffic over the tunnel and make the VM think it's on the right network, but I'm not sure whether there are better approaches. What's the best way to accomplish this hack?

    Read the article

  • Boot loop that I cannot bypass

    - by lonewaft
    Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

    Read the article

  • Completely automated DVD insert-rip-compress-eject workflow

    - by Kevin L.
    (Partially inspired by this question.) Background: I have a PC hidden away behind an HD LCD in custom-built entertainment center. The only visible part of the PC is an external DVD drive, mounted above the Wii. The PC happens to have Windows XP on it; Hackintoshing and Linux might be possible, but I've had issues with drivers for the sound card before. Let's just assume that OS X and Linux are a no-go unless they provide a truly awesome and simple solution for this particular problem. Goal: I would like to have a completely automated workflow for ripping DVDs. Something like this: Push the eject button on the DVD drive, insert the DVD. PC recognizes that this is a video DVD (as opposed to data). PC rips DVD to hard drive. PC finishes ripping, and ejects the DVD tray. PC compresses DVD image into some format that an Xbox 360 can read. PC copies finished compressed video file to a particular folder, so that it can be read into a WMP11 library and seamlessly played by the Xbox 360. PC cleans up all temporary files. Done. The impetus to have this be completely automated is that I’ll never need to switch the TV to the PC’s input and fiddle with the wireless keyboard. That’s just needless user intervention. The UI doesn’t have to be pretty. Nor do I care about speed. And I can probably bridge several of the gaps with some creative Perl use. But it seems likely that many (or all) of the parts should already exist. Any thoughts?

    Read the article

  • How can I "share" a network share over the internet to multiple operating systems?

    - by Minsc
    Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

    Read the article

  • Can't Login to phpPgAdmin

    - by Devin
    I'm trying to set up phpPgAdmin on my test machine so that I can interface with PostgreSQL without always having to use the psql CLI. I have PostgreSQL 9.1 installed via the RPM repository, while I installed phpPgAdmin 5.0.4 "manually" (by extracting the archive from the phpPgAdmin website). For the record, my host OS is CentOS 6.2. I made the following configuration changes already: PostgreSQL Inside pg_hba.conf, I changed all METHODs to md5. I gave the postgres account a password I added a new account named webuser with a password (note that I did not do anything else to the account, so I can't exactly say that I know what permissions it has and all) phpPgAdmin config.inc.php Changed the line $conf['servers'][0]['host'] = ''; to $conf['servers'][0]['host'] = '127.0.0.1'; (I've also tried using localhost as the value there). Set $conf['extra_login_security'] to false. Whenever I try to log in to phpPgAdmin, I get "Login failed", even if I use successful credentials (ones that work in psql). I've tried to go through some of the steps noted in Question 3 in the FAQ, but it hasn't worked out well so far there. It likely does not help that this is my first day working with PostgreSQL. I'm farily familiar with MySQL, but I have to use PostgreSQL for the project I'm working on. Could anyone offer some help for how to set up phpPgAdmin on CentOS 6.2? If I've done something terribly wrong in my configuration so far, it's no big deal to blow something/everything away, as it's not like I've stored any data there yet! I appreciate any insight you may have!

    Read the article

  • Could this server log mean my server is being used as a proxy?

    - by So Over It
    I came across the following entry in my access.log: 58.218.199.147 - - [05/Jun/2012:12:56:04 +1000] "GET http://proxyproxys.com/ HTTP/1.1" 200 183 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" Normally when I see a full URL entry in my access.log I assume it is log spam with people trying to get me to access their site. These entries are normally followed with a 404 response. The above entry is followed with a 200 'success' response! Doing some searching it would seem that this can occur when someone is trying to use your server as a proxy. This disturbed me more - especially because the URL in question has the word proxy in it. Going to the site 'proxyproxys.com' (using hidemyass.com to protect my own identity), the site returns what appears to be some sort of 'proxy judge' ---------------------------------------- HTTP_ACCEPT=text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 HTTP_ACCEPT_LANGUAGE=en-US,en;q=0.8 HTTP_USER_AGENT=Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.53 Safari/536.5 HTTP_CONNECTION=close REMOTE_PORT=56355 REMOTE_HOST=74.63.112.142 REMOTE_ADDR=74.63.112.142 ---------------------------------------- CS_ProxyJudge Result=HIGH_ANONYMITY ---------------------------------------- Question: 1) does the 200 success mean that someone has been able to successfully use my server as a proxy? 2) are there other means of confirming if my server is being used as a proxy 3) can you refer me to documentation to help 'close up' my security gap if there is one. Thanks.

    Read the article

  • Windows 8 auto-hibernate from sleep not working on Retina MacBook Pro

    - by frenchglen
    I have a similar question to this one. Only my context is the 15" Retina MacBook Pro - and Windows 8. I have just the original Mac OS X Mountain Lion on there, then Windows 8 via Bootcamp. no rEFIt installed. (I just press ALT every time I restart windows, actually as a security measure to stop tech-unsavvy thugs, who, if the laptop is stolen, think it's only a mac and don't discover my Windows as quickly as they would've, and by that time I remotely activate various anti-theft mac apps and nab them that way). SO: like the related question asks, why isn't it behaving like it should? The Windows 7 FAQ states: Will sleep eventually drain my laptop battery? If your laptop battery charge gets critically low while the computer is asleep, Windows automatically puts the laptop into hibernation mode. But this is just not happening - on my rMBP Windows 8. It seems EVERY time I set the laptop to sleep (when it reaches 10%), then arriving home and plugging it in and hoping to simply resume my work, it does NOT save the session to disk and I lose ALL my work. Who's fault is it? Win 8's (a bug, grr)? Or Apple's EFI system (maybe fixable via editing EFI options/do I have to install refit to make it work perhaps?) Or maybe changing windows power options can somehow fix the problem? Thanks for your help.

    Read the article

  • nf_conntrack complaints in dmesg

    - by Alexander Gladysh
    While investigating complains on bad HTTP server performance, I've discovered these lines in dmesg of my Xen XCP host that contains a guest OS with said server: [11458852.811070] net_ratelimit: 321 callbacks suppressed [11458852.811075] nf_conntrack: table full, dropping packet. [11458852.819957] nf_conntrack: table full, dropping packet. [11458852.821083] nf_conntrack: table full, dropping packet. [11458852.822195] nf_conntrack: table full, dropping packet. [11458852.824987] nf_conntrack: table full, dropping packet. [11458852.825298] nf_conntrack: table full, dropping packet. [11458852.825891] nf_conntrack: table full, dropping packet. [11458852.826225] nf_conntrack: table full, dropping packet. [11458852.826234] nf_conntrack: table full, dropping packet. [11458852.826814] nf_conntrack: table full, dropping packet. Complains are repeated every five seconds (number of suppressed callbacks is different each time). What can these sympthoms mean? Is that bad? Any hints? (Note that the question is more narrow than "how to solve specific case of bad HTTP server performance", so I do not give more details on that.) Additional info: $ uname -a Linux MYHOST 3.2.0-24-generic #37-Ubuntu SMP Wed Apr 25 08:43:22 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise $ cat /proc/sys/net/netfilter/nf_conntrack_max 1548576 The server is under about 10M hits / day load.

    Read the article

  • Erase just the free space on my hard drive

    - by Patriot
    I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

    Read the article

  • Using dropbox / symbolic link combo successfully

    - by wim
    In the past I have kept some files on dropbox by copying them into my ~/Dropbox folder on Ubuntu. I don't want to move the original files into Dropbox synch folder or muck around with my directory structure. Then I have found I was using dropbox more and more, and wasting a lot of space this way by duplication of data. I use a small SSD locally for OS, any other data is kept on mounted shares from my NAS. I found I could successfully get files up to the cloud by using symbolic links like: ln -s /some/mounted/share/dir ~/Dropbox/dir And dropbox would carry on and sync those files remotely whilst only using up the space of the symbolic link locally. This worked well for me for a few weeks, until I turned on my laptop one day and saw '421 files have been removed from your dropbox' notification. They were still there in the original mounted share, but the symbolic links I'd made were completely gone for some reason. What did I do wrong? It is possible the share could have become unmounted, but I didn't expect this would cause all my files to be deleted from the cloud could it? How can I 'share' files on my dropbox in this way without the danger of the originals being modified from remotely?

    Read the article

  • CouchDB crashes at startup when path to config file has space(s)

    - by Barry Wark
    I'm hoping to run CouchDB as a per-user Launch Agent on OS X. I'm using the coucdbx-core folder from the CouchDB Server.app as the base of my CouchDB deployment. I'd like each user to have their own couch instance (on a different port), necessitating separate config files for each instance. The logical place to put these files is in ~/Library/Application Support/ for each user. I can put the entire distribution in ~/Library/Application Support/my-app/coucdbx, and put the .ini at ~/Library/Application Support/my-app/local.ini. Starting couchdb as bin/couchdb -a ../local.ini (from ~/Library/Application Support/my-app/coucdbx) works great. But I'd like to save every user the ~50MB couchdbx and install the couchdbx-core in a shared location (e.g. within my app's .app bundle). When I do this, the path to the per-user config file contains a space, and I get the following error when starting CouchDB: $ bin/couchdb -n -a ~/Library/Application\ Support/us.physion.ovation/default.ini {"init terminating in do_boot",{{badmatch,{error,{bad_return,{{couch_app,start,[normal,["/Users/hs/prj/build-couchdb/build/etc/couchdb/default.ini","/Users/hs/prj/build-couchdb/build/etc/couchdb/local.ini"]]},{'EXIT',{{badmatch,{error,{error,enoent}}},[{couch_server_sup,start_server,1,[{file,"/Users/hs/prj/build-couchdb/dependencies/couchdb/src/couchdb/couch_server_sup.erl"},{line,56}]},{application_master,start_it_old,4,[{file,"application_master.erl"},{line,274}]}]}}}}}},[{couch,start,0,[{file,"/Users/hs/prj/build-couchdb/dependencies/couchdb/src/couchdb/couch.erl"},{line,18}]},{init,start_it,1,[]},{init,start_em,1,[]}]}} Is there any way to provide a config file at the command line, if that config file's path includes space(s)? Despite my best efforts in the mailing list archives, wiki and google, I haven't been able to find a solution or a definitive "it can't work". Any help greatly appreciated.

    Read the article

  • How do I troubleshoot a segfault in Ubuntu that occurs when typing a bogus command?

    - by Alan
    We've got a production server running Ubuntu 11.10. We're encountering segfaults that appear under various conditions. The simplest reproducible case is when we login to an ssh session as our administrative user and enter a bogus command. You'd expect the standard "command not found" error message. Instead, we get a segfault in python. The user's default shell is /bin/bash. For example: $ asdf Segmentation fault Info from /var/log/syslog: Jul 6 15:39:20 PROD001 kernel: [2155960.605695] python[7873]: segfault at 0 ip (null) sp 00007fffd030b808 error 14 in python2.7[400000+233000] Some details about the server: $ uname -a Linux PROD001 3.0.0-16-server #29-Ubuntu SMP Tue Feb 14 13:08:12 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/issue Ubuntu 11.10 \n \l Before we ask the IT department to reinstall the O.S., I'd like to understand what got us here. The system and/or this particular user's environment is suspect. Many people have touched this server over the past year, so I'm wondering if it is missing libraries, incorrectly installed packages, etc. I'm hoping that if we can understand what's going wrong in this case, it will help explain why we're getting segfaults in a couple of other scenarios. Any tips on troubleshooting this segfault will be appreciated!

    Read the article

  • Enabling Samba Shares Across Subnets

    - by John
    I was curious how I could go about setting up SAMBA so that shares could be seen and used across different subnets. We have some Linux devices that are bound to Active Directory and we would like to have them serve SAMBA shares to clients that will reside in a different subnet than what the servers reside in? Is there any way to do this without needing to setup a WINS server or use legacy NetBIOS methods since the majority of our clients are Windows 7, Windows Server 2003, Windows Server 2008, and Macintosh OS X (10.6 or newer)? EDIT Right now, only clients in the same subnet as the SAMBA server can see the shares. Clients outside of the subnet (i.e. the client subnet) cannot see or connect to the share. The error returned is: The specified network name is no longer available. It does not seem to matter if I use IP, FQDN, or NetBIOS name to try and connect to the share with. We have a common Cisco router handling the inter-subnet routing. Everything else seems to work correctly with this network setup and the device can be pinged from multiple subnets. I also do not believe it to be a firewall type of issue since the rules for this segment are rather lax.

    Read the article

  • Rename a Network Printer win Win 7

    - by Alex
    Seems this is a common question but the answers regularly miss the point. I have a server. Server has some printers connected. Server has all drivers for x32 & x64 OS PLUS ALL DEFAULTS set. Server also manages print queue. I have many workstations, all need to use the printers. All NEED to have drivers print queue and DEFAULTS propagated from server. Now.... When I add the printers on the workstations, I get: "ABC Printer on SERVER123" I need something less long - just "ABC Printer" So how? Tip: Please don't show me how to change the name of your locally installed printer. I know how to do this - I am particularly interested in shared printers that look like "ABC Printer on SERVER123" Tip: Installing the driver with a local port wont cut it because then I loose the server propagated defaults, the driver updates and I need to run around with driver disks/confuse trembling users with hard things like choosing drivers. I am happy for a hack if there is no official way to do this in the group policy.... I tried looking in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers on the workstation machines but those are only local printers :( I can see the network printer details on the workstations here: HKEY_USERS[Some GUID]\Printers\Connections But there is nothing obvious like a description string... Can anyone help with this?

    Read the article

< Previous Page | 776 777 778 779 780 781 782 783 784 785 786 787  | Next Page >