Search Results

Search found 25792 results on 1032 pages for 'map edit'.

Page 781/1032 | < Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >

  • With Ubuntu 9.10, my DVD keeps spinning up

    - by Ken
    I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

    Read the article

  • Creating RAID1 on Windows Server causes not enough disk space error

    - by northpole
    I have three disks. Disk0 (boot), Disk1 and Disk2. Disk 1 and 2 are both unformatted and unallocated drives. I am trying to mirror Disk0 to Disk1. They are both Dynamic and are both the same size (1TB). When I select Disk1 to be the mirror I get the error "There is not enough space available on the disk(s) to complete this operation". I have spent several hours searching for a solution but have not found one. Why do I get this error when they are both the same size? EDIT: Shrinking the volume size on the boot disk by 100MB allowed me to get past this error. From what I read the mirror drive needs to be the same size or larger than the boot drive. So I am confused why that change worked. However, I now get the error " all disks holding extents for a given volume must have the same sector size and the sector size must be valid". I believe this is because the drives are different and one has 512B and the other is the Advanced Drive that is 4KB. What the different sector sizes cause both problems? If I got the same disks would both issues go away?

    Read the article

  • OSX root user keeps re-enabling itself on reboot

    - by geodave
    Running Snow Leopard. Completely inexplicably, I seem to have enabled the OSX root user by accident. I honestly have no idea how it happened, but if memory serves I was looking at the login pane (with my two user accounts) when I must have hit something, and suddenly the two accounts were replaced by one that just said "Other..." Clicking the "Other..." account allows me to type a username and password, but neither of the normal two accounts would work. Since I never set a root password, it wouldn't let me in that way either. So I booted into Single User mode and ran these commands: /sbin/mount -uw / fsck -fy launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist dscl . -passwd /Users/root newpassword and that let me login as root. Then, I went to System Preferences, Accounts, Login Options, clicked Join, Open Directory Utility, and lastly in the Edit menu I clicked "Disable Root User" Great, I thought, back to normal. Except rebooting, I still only have the Other... account visible, and the root password I set beforehand doesn't work anymore! I have to reboot into Single User Mode and go through the whole process again just to get back into the system (as root) How on Earth did I accidentally enable this? I didn't even know about the Directory Utility before now. And most importantly, why the heck would it be re-enabling the root user on boot? Thanks in advance to any help!

    Read the article

  • Postfix selective header_checks: smtpd_relay_restrictions vs. smtpd_recipient_restrictions

    - by luke
    Some of my customers implemented commercial software that violate email-RFCs such that we have had to relax our header checks. In consequence, we receive more spam. Prolog: I know the domains (customer.com) and IP-addresses (a.b.c.d/C) these emails come from Kind request for help: Is it possible to setup one Postfix (2.11) instance on Linux such that: It applies only some header checks for emails from .*@customer.com But applies all header checks for all other email sources? I thought of a combination of mynetworks that includes the subnet a.b.c.d/C in smtpd_recipient_restrictions -- allowing all these messages through -- and simultaneously avoid an open-relay with smtpd_relay_restrictions. However, this has not worked out as expected. Any idea or help is highly appreciated. Thanks in advance. Luke ==EDIT== For the current issue, I solved the problem by prepending REDIRECTs to header_checks as follows: /^received: from.*customer.com.*by mail.own.com.*for.*luke@own.*/ REDIRECT [email protected] This works so far as neeeded. Irrespective thereof, I am still looking for a postfix configuration that would turn this text-based setting into an IP-Address-Range based forwarding rule.... Thanks. Luke

    Read the article

  • Serving only certain files from a directory to users on IIS7

    - by HarbingTarbl
    I'm have a need to show the most up to date version of a certain file in a directory to users who access a folder on my site (lets call this folder logs). I can't just move the file into the folder as another process relies on being able to find and edit this file while it is running. At first I had thought I could just create a folder on my site, give it the correct permissions and then create a symbolic link to the file. However it seems IIS7 does not follow symlinks. Another solution would be to create a phpscript that pulls the correct file and displays it, but that felt like over-engineering the solution. I know that on Apache this would be simple, but I can't figure out how to do it with IIS7. To give an idea of the folder structure I'm working with. The directory looks like this. Root --File I need to serve. --File containing plain text passwords. --Other folders/files. I can't move any of these files. If I just serve the entire directory using Virtual Directories in IIS I'll also be sharing files and folders containing configuration and other sensitive information.

    Read the article

  • Linksys router cannot change default password

    - by Jessica M.
    My wireless internet suddenly stopped working today. I have Windows 7 and Lindsys WRT54G router. I tried to log into the Linksys setup router page by typing in www.192.168.1.1 into firefox and it prompted me for a username and password as usual. The problem is when i tried to enter my regular username and password it did not work. I finally solved my problem when I came across this post here and the very last post solved my problem. It suggested I try username: root / password: admin. For some reason the username and password has been changed. When i tried username: root / password: admin , it worked and allowed me to get into the Linksys setup page. The problem is I can't change the username or password anymore. Every time I want to log into my Linksys setup page I have to enter username: root / password: admin. I can't change the "WPA shared key" (password). For the security settings I selected WPA2Personal + AES. Also the post said "If the firmware was upgraded to non-linksys firmware - the default will be different" . The problem is I didn't update anything and I'm worried that someone installed a virus or something or somehow changed the firmware on my router. How did I get non-Linksys firmware on my router? EDIT: I figured out how to change the password when I log into the Lynksys setup page. Administration -- Management -- password. I still don't understand if my router firmware was changed or who changed it or if it happened by mistake.

    Read the article

  • Apache Config: RSA server certificate CommonName (CN) ... NOT match server name?

    - by mmattax
    I'm getting this in error_log when I start Apache: [Tue Mar 09 14:57:02 2010] [notice] mod_python: Creating 4 session mutexes based on 300 max processes and 0 max threads. [Tue Mar 09 14:57:02 2010] [warn] RSA server certificate CommonName (CN) `*.foo.com' does NOT match server name!? [Tue Mar 09 14:57:02 2010] [warn] RSA server certificate CommonName (CN) `www.bar.com' does NOT match server name!? [Tue Mar 09 14:57:02 2010] [notice] Apache configured -- resuming normal operations Child processes then seem to seg fault: [Tue Mar 09 14:57:32 2010] [notice] child pid 3425 exit signal Segmentation fault (11) [Tue Mar 09 14:57:35 2010] [notice] child pid 3433 exit signal Segmentation fault (11) [Tue Mar 09 14:57:36 2010] [notice] child pid 3437 exit signal Segmentation fault (11) Server is RHEL, what's going on and what do I need to do to fix this? EDIT As requested, the dump from httpd -M: Loaded Modules: core_module (static) mpm_prefork_module (static) http_module (static) so_module (static) auth_basic_module (shared) auth_digest_module (shared) authn_file_module (shared) authn_alias_module (shared) authn_anon_module (shared) authn_default_module (shared) authz_host_module (shared) authz_user_module (shared) authz_owner_module (shared) authz_groupfile_module (shared) authz_default_module (shared) include_module (shared) log_config_module (shared) logio_module (shared) env_module (shared) ext_filter_module (shared) mime_magic_module (shared) expires_module (shared) deflate_module (shared) headers_module (shared) usertrack_module (shared) setenvif_module (shared) mime_module (shared) status_module (shared) autoindex_module (shared) info_module (shared) vhost_alias_module (shared) negotiation_module (shared) dir_module (shared) actions_module (shared) speling_module (shared) userdir_module (shared) alias_module (shared) rewrite_module (shared) cache_module (shared) disk_cache_module (shared) file_cache_module (shared) mem_cache_module (shared) cgi_module (shared) perl_module (shared) php5_module (shared) python_module (shared) ssl_module (shared) Syntax OK

    Read the article

  • Network share not always available on Windows 2003

    - by JP Hellemons
    Hello everybody, we have a windows 2003 server with a shared directory/folder. I've seen this thread but this wasn't any help: http://superuser.com/questions/58890/the-specified-network-name-is-no-longer-available I have a ping -t running from 3 pc's (vista and two windows 7) they all work. the problem occurss when two users enter the network share then this 'network share is no longer available' appears and the explorer windows turn white. after f5 or refresh the shared directory is back. this is really strange. there is no anti virus or kasparsky running on either end. this is all in the same LAN. the internet connection is really stable, so it's really strange. because a stable internet connection should imply that the local network connection is also stable and that this is a windows issue. can it be a router issue? I have checked the eventlog on the server for diskfailure related messages, but there are none. EDIT: can this be related to mapping a shared directory to a drive letter? and that there is a router between me and the mapped network drive? or is it just windows that is not working well with two users on the same shared folder? should I install samba or something?

    Read the article

  • Using IIS7 as a reverse proxy

    - by Jon
    My question is pretty much identical to the question listed but they did not get an answer as they ended up using Linux as the reverse proxy. http://serverfault.com/questions/55309/using-iis7-as-a-reverse-proxy I need to have IIS the main site and linux (Apache) being the proxied site(s). so I have site1.com (IIS7) site2.com (Linux Apache) they have subdomains of sub1.site1.com sub2.site1.com sub3.site2.com I want all traffic to go to site1.com and to say anything that is site2.com should be proxied to linux box on internal network, (believe ARR can do this but not sure how). I can not have it running as Apache doing the proxying as I need IIS exposed directly. any and all advice would be great. EDIT I think this might help me: <rule name="Canonical Host Name" stopProcessing="true"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" negate="true" pattern="^cto\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="^antoniochagoury\.com$" /> <add input="{HTTP_HOST}" negate="true" pattern="www.antoniochagoury\.com$" /> </conditions> <action type="Redirect" url="http://www.cto20.com/{R:1}" redirectType="Permanent" /> </rule> from: http://www.cto20.com/post/Tips-Tricks-3-URL-Rewriting-Rules-Everyone-Should-Use.aspx I will have a look at this when I have access to the IIS7 box. Thanks

    Read the article

  • MacBook Pro - Aquamacs - spell check

    - by peggy Li
    I have tried to use spell check for aquamac. I highlighted a region of the text. Then clicked Edit, then spell check region. I got the error message: Error : No word lists can be found for the language "en_US". Then I went to the website to download the following dictionaries: CocoAspell : I just clicked the download button. It was reported that the download was successful. However, when I tested it and highlighted a text region and clicked spell check. The same error message came out. Do I need to pull the downloaded .pkg to a certain place, such as the application folder, before I opened the .pkg? Or what else do I need to do make it work? I also downloaded the base package Aspell (for Intel) and the pre-built dictionaries as (as the instruction of the website), just the same way as point 1. I still got the same error message. Again, Do I need to pull the downloaded .pkg to a certain place, such as the application folder, before I opened the .pkg? Or what else do I need to do make it work? I would be greatly appreciated if someone could give me some help? Peggy Li

    Read the article

  • Current wisdom on SQL Server and Hyperthreading?

    - by BradC
    Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

    Read the article

  • Why do I have 55 local area connections in ipconfig?

    - by RMorrisey
    Windows Vista Home Premium. I should mention that I am having no problem whatever getting an internet connection. When I type "ipconfig" in the console, I get (55!) messages of 3 lines each, listing a ton of disconnected network connections. My PC only has one network card. Each message looks like this: Tunnel adapter Local Area Connection* 55: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : These don't cause a major problem; they make it a pain, though, to fish upward and find my IP address. How can I get rid of them? Edit: Actually, a few connection numbers are randomly missing from the sequence; so, it's really more like 30 or 40 connection messages, rather than all 55. Not sure why that is, either.

    Read the article

  • Batch Script to Find Certain words and delete those lines in a file

    - by SuperUserMan
    EDITED THE QUESTION as regarding type of solutions I am on Windows & some suggested SED etc. So i am OK with these 3rd party standalone exe's using command line Say i have following lines in abc.txt file "@yuy007 what are you doing friend #disneyrocks" "STFU, i dont care what you think @happy55" "@social88 @gg99 ok mate see you at the subway :)" "btw arnold was great in that movie @tt11 @gg11 #disneyrocks" "we are going to disney. Do you want to? #disneyrocks" "We dont like disney.#disneyrocks we are not going" ".@socialguy what are you upto #disneyrocks " I need to employ 5 filters with above file to get def.txt Delete all lines which start with @ character, like 1st and 3rd Delete all lines which start with .@ characters, like 7th Delete all lines which don't have any word starting with # like 2nd and 3rd In leftover lines, Delete all words starting with @ character (keeping the lines intact) like words @happy55 in 2nd , @social99 & @gg99 in 3rd, etc. In this case we still need to preserve quotes " at start and end of line Delete all the blank lines left after above lines are removed EDIT if i have following line , it wrongly deletes the content after @word's "btw arnold was great in that movie @tt101 @gb1997 #whatthehell" is edited to "btw arnold was great in that movie" Thanks

    Read the article

  • Windows 7 Loading Very Slow

    - by Adnan
    Hi guys, I've had a problem that only started to occur yesterday. When I boot into Windows 7 and log on to my user account, the computer gets very laggy and slow for at least 5 minutes. Icons take ages to load, and everything is rendered unclickable. This happens for about five minutes after which everything goes back to normal. I tried restarting a few times to see if this is a recurring problem, and it is. I ran a full system scan with Microsoft Security Essentials and found nothing wrong, and I also defragmented the disk to increase performance. However, the problem still exists. Edit: For the past day, I've been trying to install Ubuntu on the same laptop. When installing it on a partition didn't work, I decided to use Wubi. Could this somehow be the problem? Also, my hard drive gets hot a lot, so could the heat be affecting the hard drive and maybe making it defective? Any help on this issue would be greatly, greatly appreciated.

    Read the article

  • Windows 7 Can't Connect to Network Drive on Windows XP

    - by Alex Yan
    I have a Windows XP desktop and a Windows 7 laptop both connected to a TrendNET TEW-432BRP router, which is connected to the Internet. They both have static IPs. The desktop has an external hard drive connected to it. The laptop is wireless and the desktop is wired. I enabled sharing on the external hard drive about two years ago when I bought it. I mapped it as a network drive on the laptop. I think it was yesterday, the laptop just stopped recognizing any of the computers on my network (When I open network, my laptop's the only one on it). I also get an error message "An error occurred while connecting A: to \CERTIFIED-DATA\Expansion Microsoft Windows Network: The network path was not found. The connection has not been restored" when I try to connect to the network drive. Both computers run Avast, and there hasn't been any problems with it. This has happened before but I never figured out why and how to fix it. It's usually fixed when I reinstall the OS of the affected system. Edit: I can't navigate the computer using \\CERTIFIED-DATA. I get a message saying "Windows cannot access \CERTIFIED-DATA. Check the spelling of the name, Otherwise, there might be a problem with your network" I clicked diagnose on the message and it failed to find anything wrong I clicked diagnose on my wireless connection, and it just keeps trying to check if something is wrong with the connection I can ping it successfully

    Read the article

  • Can access SSH but can't access cPanel web server

    - by Tom
    I've built a Cent OS 6.0 vps and then i've installed the latest cPanel/WHM. This isn't my first installation but i've noticed something weird especially that i've never used the 6.0 version.. when i tried to install cPanel, it didn't recognize wget so installed it, then cPanel said that Perl isn't installed, i've installed that and the installation went well since then. Now, when i've tried to access the server via the browser with the IP Adress as i've used to, it didn't work, it was just loading forever, i tried the 2087 port, still the same. but SSH works. I've also tried the commands to start the server manually but none of them worked. How to fix that? Edit: iptables -nL Result root@server [~]# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 Chain acctboth (2 references) target prot opt source destination tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:80 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:80 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:25 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:25 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:110 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:110 icmp -- 216.119.149.168 0.0.0.0/0 icmp -- 0.0.0.0/0 216.119.149.168 tcp -- 216.119.149.168 0.0.0.0/0 tcp -- 0.0.0.0/0 216.119.149.168 udp -- 216.119.149.168 0.0.0.0/0 udp -- 0.0.0.0/0 216.119.149.168 all -- 216.119.149.168 0.0.0.0/0 all -- 0.0.0.0/0 216.119.149.168 all -- 0.0.0.0/0 0.0.0.0/0

    Read the article

  • Question for Vim search and peck typists

    - by mike
    I'm trying to write a Vim tutorial and I'd like to start by dismissing a few misconceptions, as well as giving some recommendations. I don't know if I should dismiss touch-typing as a misconception, or include it as a recommended prerequisite. At the time I learned the editor, I had already been touch typing for a couple of years, so I have absolutely no idea what would be the experience of a two-fingered typist in Vim. Are you a vim two-fingered typist? what has your experience been like? EDIT: I'm not sure if my question was clear enough. Maybe it's my fault, I don't know. I get mixed replies and other questions (why do you write this? what does one have to do with the other?), instead of empirical info (I don't touch type and it's been (fine|hell)). Some programmers touch-type others search and peck. In the middle, there's Vim which requires a certain affinity with keys to do various operations. I am a touch typist and I have no clue what my experience would have been like with the editor if I wasn't. I can't honestly picture myself pecking some of these combos. But like I said, I don't know what it is like. Before telling someone to start using Vim, I'd like to know if I should dismiss touch-typing as a misconceived requirement. So, I'll rephrase the question, have you felt that not being a touch-typist has impeded on your experience with Vim?

    Read the article

  • Have an Input/output error when connecting to a server via ssh

    - by Shehzad009
    Hello I seem to be having a problem while connecting to a Ubuntu Server while connecting via ssh. When I login, I get this error. Could not chdir to home directory /home/username: Input/output error It seems like my home folder is corrupt or something. I cannot ls in the home folder directory, and in my usename directory, I can't cd into this. As root I cannot ls in the home directory as well or in any directory in Home. I notice as well when I save in vim or quit, it get this error at the bottom of the page E138: Cannot write viminfo file /home/root/.viminfo! Any ideas? EDIT: this is what happens if I type in these commands mount proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) /dev/mapper/RAID1-lvvar on /var type xfs (rw) /dev/mapper/RAID5-lvsrv on /srv type xfs (rw) /dev/mapper/RAID5-lvhome on /home type xfs (rw) /dev/mapper/RAID1-lvtmp on /tmp type reiserfs (rw) dmesg | tail [1213273.364040] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213274.084081] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213309.364038] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213310.084041] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213345.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213346.084042] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213381.365036] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213382.084047] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213417.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213418.084063] Filesystem "dm-4": xfs_log_force: error 5 returned. fdisk -l /dev/sda Cannot open /dev/sda

    Read the article

  • Protocol to mount fat32 network filesystem on Linux with ability to lock files ( not advisory locks

    - by nagul
    I have a fat32 filesystem sitting on a NAS storage device (nslu2) that I need to mount on my Ubuntu system. I've tried Samba and NFS mounts, but both don't seem to support proper locking. More specifically, I am unable to save files to the mounted drive through GNUcash, KeepassX etc, which makes the share fairly useless. Is there a protocol that allows me to achieve this ? Note that the NAS storage device is running a linux OS so I can run pretty much any protocol that has a linux implementation. The only option I'm not looking for is to reformat the partition to ext3, which I'm not able to do due to other constraints. Alternatively, has anyone managed proper locking of a fat32 system over the network using Samba ? Or, is advisory locking the best you get with a network-mounted fat32 file system ? I've thought of trying sshfs but I've not found any indication that this will solve my problem. Edit: Okay, maybe I can reformat the drive, but to any file system except ext3. The "unslung" nslu2 doesn't like more than one ext3 drive, and I already have one attached. So any solution that involves reformatting the drive to ntfs, hfs etc is fine, as long as I can mount it on linux and lock files.

    Read the article

  • Usage of putty in command line from Hudson

    - by kij
    Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

    Read the article

  • MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC network access on)

    - by SocialAddict
    I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :) Edit: I have created a more straightforward test page with a transaction as below and this works fine. Could a nested transaction cause this kind of error and if so why would this only cause an issue when using a live box in a dmz with a firewall? AuditRepository auditRepository = new AuditRepository(); try { using (TransactionScope scope = new TransactionScope()) { auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#1", 1); auditRepository.Save(); auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#2", 1); auditRepository.Save(); scope.Complete(); } } catch (Exception ex) { Response.Write("Test Error For Transaction: " + ex.Message + "<br />" + ex.StackTrace); }

    Read the article

  • Backup strategy for developer-focused Apple environments?

    - by ewwhite
    It's interesting to see the technological split between structured corporate environments and more developer-driven/startup environments. Some of the Microsoft technologies I take for granted (VSS, Folder Redirection, etc.) simply are not available when managing the increasing number of Apple laptops I see in DevOps shops. I'm interested in centralized and automated backup strategies for a group of 30-40 Apple laptops... How is this typically done safely and securely, assuming these are company-owned machines (versus BYOD)? While Apple has Time Machine, it's geared toward individual computer backups and doesn't seem to work reliably in a group setting. Another issue with these workstations is the presence of Vagrant/Virtual Box VMs on the developers' systems. Time Machine and virtual machines typically don't work well unless the VMs are excluded from the backup set. I'd like a push-based backup process with some flexible scheduling options. I know how to handle the backend storage, but I'm not sure on what needs to be presented to the client systems. Due to the nature of the data here, cloud-based backup may not be a viable option. Any suggestions about how you handle this in your environment would be appreciated. Edit: The virtual machine backups are no longer important. They can be excluded from the process and planning.

    Read the article

  • Software to capture 3d geometry?

    - by user712092
    Programs I found I found these programs to capture OpenGL 3D scene : 3D Ripper, OpenGL and D3D geometry capture, there are some solved problems with 3D Ripper GLIntercept captures OpenGL function calls OpenGL Extractor captures 3d geometry; should work as plugin for GLIntercept another tool to capture OpenGL 3D data EDIT: There is also HijackGL which changes how a scene is rendered so it probably can be used to capture geometry; it is backed up by a academic paper; it is just just a nice program, not related to what I want i think (or it would might be hard to change it to be for what I want, because it would require programming). 3D Ripper captures geometry, textures and shaders. OpenGL Extractor captures just geometry ... General questions about such programs What is Your experience with these programs? Which of these programs would You recommmend? Do You know other such programs? Were there any problems with them, or are there problems with them in general? Are there programs which work best overall, or is it specific to certain 3d applications? What I need to do? I am looking to program which can capture 3d geometry for study purposes. And also for a program to capture 3D animation (frames of 3d animation). I tried only 3D Ripper because application I try to capture data from is on Direct 3D. 3D Ripper works with at least Direct 3D 9, this application has Direct 3D 6. Are there applications which work with older version of Direct 3D? Thank You very much. :) (I was verbose in link names because I want them to be indexed better by search engines.)

    Read the article

  • Trying to use a SmartHost with my Exchange 2010 server

    - by Pure.Krome
    Hi folks, I'm trying to use a SmartHost with my Exchange 2010 Server. SmartHost details: Secure SMTPS: securemail.internode.on.net 465 <-- Note: that's port 465 Configure your existing SMTP settings (in your email program) to: use authentication (enter your Internode username and password, enter your username as [email protected]). enable SSL for sending email (SMTPS). So I've added the smart host details to my Org Config -> Hub Transport. I then used PowerShell to add the port:- Set-SendConnector "securemail.internode.on.net" -port 465 I've then added my username/password (as suggested above) to the SmartHost as Basic Authentication (with no TLS). Then I try sending an email and I get the following error message :- 451 4.4.0 Primary target IP address responded with: "421 4.4.2 Connection dropped due to ConnectionReset." So i'm not sure how to continue. I also tried ticking the TLS box but stll I get the same error. If i don't use SMTPS (secure SMTP, on port 465) and use basic SMTP on port 25 with no Authentication, email gets sent. Any ideas? EDIT: Btw, I can telnet to that server on port 465 from my mail server .. just to make sure i'm not getting firewall'd, etc.

    Read the article

  • Password Manager that allows syncing accross platforms

    - by lexu
    I use OS X, Linux, Solaris and windows for work and from home. There are good tools that allow me to manage the many logins/passwords required platform independently. But mostly they expect me to carry a thumb-drive around or require direct access to a central location (a sky drive in the cloud). The thumb-drive is too easily lost (= synchronized backup needed), the central location not always reachable/ mountable. Besides company policy rightly prevents this often. Is there a tool that allows me to add passwords locally and then syncs it's DB with the "mother-ship" later. Or is there another approach that you use, that solves my problem? EDIT My question is more about "synchronize" than cross platform. I've evaluated (=read feature list) some good cross platform tools, but need one that does the synchronizing for me. By synchronize I mean "merge two versions" not "replace (hopefully) old file with new." I'm not sure I'm always disciplined/awake enough to prevent data loss. UPDATE Lifehacker just posted that AgileSolutions now have a beta version of 1Password for Windows.

    Read the article

< Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >