Search Results

Search found 23952 results on 959 pages for 'mouse click'.

Page 783/959 | < Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >

• Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

  - by arlendo

  Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

  Read the article

• Split Internet Explorer into Dual-Panes

  - by Asian Angel

  If you have a wide screen monitor then you may want to make better use of Internet Explorer’s browser window area. Now you can split the browser window into dual-panes as needed with the IE Split browser plugin. Note: Requires .NET Framework 2.0 or higher (link provided below). IE Split in Action If you are using an older version of this software here is something to keep in mind before upgrading to the 2.0 release. Once you have installed IE Split you will notice a new toolbar added to your browser. As seen here, you can condense it down tightly and access it using the drop-down bar. A closer look at the drop-down bar. Notice the address bar…this will be for the left pane when you split the browser window. Here is our browser split into dual-panes. There are two address bars and two tab/title bars each corresponding to their appropriate pane. It may look slightly backwards at first but is not hard to get used to. A better view of the left pane with the IE Split navigation & title bars showing. Note: The title bar can be hidden if desired. And the right pane. You can also have multiple “split” tabs open if needed. There is nothing quite like getting double the value for the same amount of space. When you no longer need dual-panes open just click on the “x” to close IE Split down. All back to normal again. Conclusion While might not be for everyone this can still be useful for those who need side-by-side access to websites without using multiple separate windows. Links Download IE-Split Download the Microsoft .NET Framework 4 (Standalone Installer) Similar Articles Productive Geek Tips Set Up Multi-Pane Viewing in FirefoxWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer?Split a text file in half (or any percentage) on Ubuntu LinuxMysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPMake Ctrl+Tab in Internet Explorer 7 Use Most Recent Order TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like)

  Read the article

• Ubuntu won't suspend automatically any more

  - by Sparhawk

  In the last month or so, Ubuntu (12.04) has stopped sleeping automatically. I've gone to System Settings Power, and verified (and toggled) "suspend on inactive for" to 5 minutes (for both battery and "when plugged in"), but the system stays awake. I've also tried used code similar to $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 300 $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 300 to set the timeout values. I've also verified these in dconf Editor. Previously, I could set this quite low to make my computer sleep quickly, but now it no longer works either. I'm not sure if this is relevant, but under old versions of Ubuntu, if I wanted my computer to never suspend (via the CLI), I would also have to set $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac false At some point, this seemed to have been depreciated (and also gave me the error "No such key 'sleep-inactive-ac'"). I found that it it was enough to set sleep-inactive-ac-timeout to 0. This worked for a while, but at some point auto-suspend stopped working as stated above. Oddly enough, the sleep-inactive-ac key is still present when I look via dconf editor. However, when I click it, it says "no schema", and the summary, etc. fields are blank. To test if the dconf power plugin was working, I tried playing around with other settings in the schema. Idle-dim-time and idle-dim-ac work as expected . However, setting sleep-display-ac to 5 seconds has no effect. I'm also not sure if this is relevant, but I've uninstalled gnome-screensaver, and installed xscreensaver. I have tried killing xscreensaver and re-installing gnome-screensaver, but this did not help. I've also had some trouble with DPMS. I'm not sure if this is related, but I'll put the information here, just in case. Using xscreensaver, I set Power Management to enabled, with standby and suspend timeouts to 10 minutes. I've verified these settings in ~/.xscreensaver and xset q. However, the screen blanks after about 30 seconds. If I turn off DPMS (either via xscreensaver GUI or modifying ~/.xscreensaver), it won't blank at all, so I know that DPMS is partially reading the xscreensaver settings. -- edit I've attempted more troubleshooting, by creating a new user account, then logging out of the main account and into the new account. I've tried modifying the timeouts via dconf, but get the same results as above (i.e. it doesn't work, nor does sleep-display-ac, but idle-dim-time and idle-dim-ac work). Also, the depreciated sleep-display-ac key is not visible, so I think that this is probably unrelated. -- edit I've since moved to gnome-shell instead of unity, and still have this problem, so I guess that it's something to do with gnome-power-manager.

  Read the article

• Exadata at Oracle Openworld - A guide to sessions

  - by Javier Puerta

  A large number of sessions focusing on Exadata will be taking place during the week of Oracle Openworld in San Francisco. To help you organize your schedule I am including below a list of sessions and events around Exadata that you will find of interest. PARTNER SPECIFIC SESSIONS Date/Time/Location  Session Sunday, Sep 30, 3:30 PM - 4:30 PM - Moscone South - 301 Building a Winning Services Practice with Oracle’s Engineered Systems.- This session kicks off a week-long session on Oracle’s engineered systems, from Oracle Database Appliance to Oracle Exadata, Oracle Exalogic, Oracle Exalytics, Oracle Big Data Appliance, and Oracle SPARC SuperCluster. Hear about what is to come in the week ahead in terms of engineered systems. As an ideal consolidation platform for database workloads, Oracle Exadata generates significant services opportunities. This session reviews the range of partner-led services that support Oracle Exadata deployments.   Monday, October 1st, 2011 at 15:30 - 18:00 PST Grand Hyatt San Francisco 345 Stockton Street, San Francisco (Conference Theater) (It is a 15 minute walk from OOW Moscone Center. See directions here) Exadata & Manageability EMEA Partner Community Forum.- Listen to other partners share their experiences in selling and implementing Exadata and Manageability projects, and have a direct dialogue with some of the Oracle executives that are driving the strategy of the company in these areas. Agenda Welcome - Hans-Peter Kipfer, VP, Engineered Systems Oracle EMEA Next challenges in building and managing clouds - Javier Cabrerizo, VP, Business Development for Exadata, Oracle Corp. Partner Experiences: IT modernization, simplification and cost reduction: The case of a customer in Transportation & Logistics with custom applications and SAP. - Francisco Bermudez, Country Leader Infrastructure Services, Capgemini, Spain Nvision cloud project - Dmitry Krasilov, Head of Oracle Competence Center, Nvision Group, Russia From Exadata Ready to Exadata Optimized: An ISV Experience - Miguel Alves, Product Business Solutions Manager, WeDo Technologies, Portugal To confirm your participation send an email to [email protected]  Wednesday, Oct 3, 11:45 AM - 12:45 PM - Marriott Marquis - Golden Gate B  Building a Practice with Exadata Database Machine.- As an ideal consolidation platform for database workloads, Oracle’s Exadata Database Machine generates significant services opportunities. In this session, learn about the range of partner-led services that support Exadata Database Machine deployments.  Other Engineered Systems sessions for Partners at the Oracle PartnerNetwork Exchange  Click here.-   OOW CUSTOMER SESSIONS   Download the Focus On Exadata guide for a full list of Exadata OOW sessions.  

  Read the article

• Desktop Fun: Happy New Year Wallpaper Collection [Bonus Edition]

  - by Asian Angel

  As this year draws to a close, it is a time to reflect back on what we have done this year and to look forward to the new one. To help commemorate the event we have put together a bonus size edition of Happy New Year wallpapers for your desktops. Extra Note: We made a special effort to find wallpapers for this collection without the year “printed” on them, thus allowing for reuse as desired and/or needed beyond the 2010 – 2011 holiday. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. For more New Year’s desktop goodness be sure to check out our Happy New Year icon & font packs collection (link at bottom)! Note: This wallpaper will need to be placed on a larger white background in order to increase the height. Note: This wallpaper will need to be placed on a larger background in order to increase the width and height. Note: This wallpaper comes in multiple sizes and will need to be downloaded as a zip file. Note: This wallpaper comes in multiple sizes and will need to be downloaded as a zip file. Note: The download size for the original version of this wallpaper is 15 MB. Note: The download size for the original version of this wallpaper is 15 MB. More Happy New Year Fun Desktop Fun: Happy New Year Icon and Font Packs For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? The Outdoor Lights Scene from National Lampoon’s Christmas Vacation [Video] The Famous Home Alone Pizza Delivery Scene [Classic Video] Chronicles of Narnia: The Voyage of the Dawn Treader Theme for Windows 7 Cardinal and Rabbit Sharing a Tree on a Cold Winter Morning Wallpaper An Alternate Star Wars Christmas Special [Video] Sunset in a Tropical Paradise Wallpaper

  Read the article

• Salt River Project Identifies US$500,000 in Cost Reduction Opportunities Through Unified IT Portfolio Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Salt River Project (SRP) includes two entities serving the Phoenix area: the Salt River Project Agricultural Improvement and Power District and the Salt River Valley Water Users’ Association. The SRP district operates various power plants and generating stations to provide electricity to nearly 956,000 retail customers. The SRP association maintains an extensive system of reservoirs, wells, and irrigation laterals to deliver nearly 1 million acre-feet of water annually. Salt River Project implemented Oracle’s Primavera Portfolio Management to unify management of its extensive IT portfolio, including essential utility systems, like work and asset management, as well as programming frameworks and development tools. With the system, SRP discovered almost US$500,000 in cost-reduction opportunities by identifying redundant or low use software, including 150 applications that are close to being unsupported. The company retired 10 applications in the last year and upgraded 34 systems. SRP also identified preferred technologies and ensured that more than 90% of applications are based on standard technologies—reducing procurement costs, simplifying maintenance support, and lowering total cost of ownership. Solutions: Provided approximately 70 users in the IT support group with detailed insight into the product lifecycle of each piece of IT infrastructure and software in the entire portfolio Discovered almost US$500,000 in cost reduction opportunities by identifying redundant or low use software that could be eliminated or migrated to alternative solutions Identified approximately 150 applications that are close to being unsupported and prioritized them to begin modernization Click here to view more Oracle Primavera Portfolio Management solutions for SRP. Why Oracle Salt River Project chose Oracle’s Primavera Portfolio Management after evaluating it against four other solutions. “Oracle’s Primavera Portfolio Management offered the most functionality to support our diverse needs,” said Eileen Ahles, IT portfolio manager, Salt River Project. Read the complete customer success story Access a list of all Primavera customer success stories

  Read the article

• BizTalk 2009 - SQL Server Job Configuration

  - by StuartBrierley

  Following the installation of Biztalk Server 2009 on my development laptop I used the BizTalk Server Best Practice Analyser which highlighted the fact that two of the SQL Server Agent jobs that BizTalk relies on were not running successfully.  Upon investigation it turned out that these jobs needed to be configured before they would run successfully. To configure these jobs open SQL Server Management Studio, expand SQL Server Agent > Jobs and double click on the appropriate job.  Select Steps and then edit the appropriate entries. Backup BizTalk Server (BizTalkMgmtDb) This job is comprised of three steps BackupFull, MarkAndBackupLog and ClearBackupHistory. BackupFull exec [dbo].[sp_BackupAllFull_Schedule] ‘d’ /* Frequency */,‘BTS’ /* Name */,‘<destination path>’ /* location of backup files */ The frequency here is set/left as daily The name is left as BTS You must provide a full destination path for the backup files to be stored. There are also two optional parameters: A flag that controls if the job forces a full backup if a partial backup fails A parameter to control the time of day to run the full backup; the default is midnight UTC time For example: exec [dbo].[sp_BackupAllFull_Schedule] ‘d’ /* Frequency */,‘BTS’ /* Name */,‘<destination path>’ /* location of backup files */ , 0, 22 MarkAndBackUpLog exec [dbo].[sp_MarkAll] ‘BTS’ /* Log mark name */,’<destination path>’  /*location of backup files */ You must provide a destination path for the log backups. Optionally you can also add an extra parameter that tells the procedure to use local time: exec [dbo].[sp_MarkAll] ‘BTS’ /* Log mark name */,’<destination path>’  /*location of backup files */ ,1 Clear Backup History exec [dbo].[sp_DeleteBackupHistory] @DaysToKeep=7 This will clear out the instances in the MarkLog table older than 7 days.    DTA Purge and Archive (BizTalkDTADb) This job is comprised of a single step. Archive and Purge exec dtasp_BackupAndPurgeTrackingDatabase 0, --@nLiveHours tinyint, 1, --@nLiveDays tinyint = 0, 30, --@nHardDeleteDays tinyint = 0, null, --@nvcFolder nvarchar(1024) = null, null, --@nvcValidatingServer sysname = null, 0 --@fForceBackup int = 0 Any completed instance that is older than the live days plus live hours will be deleted, as will any associated data. Any data older than the HardDeleteDays will be deleted - this means that those long running orchestration instances that would otherwise never be purged will at some point have their data cleared down while allowing the instance to continue, thus preventing the DTA databse from growing indefinitely.  This should always be greater than the soft purge window. The NVC folder is the path for the backup files, if this is null the job will not run failing with the error : DTA Purge and Archive (BizTalkDTADb) Job failed SQL Server Management Studio, job activity monitor, view history The @nvcFolder parameter cannot be null. Archive and Purge step How long you choose to keep instances in the Tracking Database is really up to you. For development I have set this up as: exec dtasp_BackupAndPurgeTrackingDatabase 0, 1, 30, ’<destination path>’, null, 0 On a live server you may want to adjust these figures: exec dtasp_BackupAndPurgeTrackingDatabase 0, 15, 20, ’<destination path>’, null, 0

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 13-19, 2013

  - by OTN ArchBeat

  The list below represents that Top 10 most popular items shared on the OTN ArchBeat Facebook Page for the week of October 13-19, 2013, as determined by the clicks, likes, and other activities among the 4,425 fans of that page. Going Mobile with ADF – Implementing Data Caching and Syncing for Working Offline | Steven Davelaar Oracle Fusion Middleware A-Team solution architect Steven Davelaar takes you on a deep dive into how to use ADF Mobile to create an on-device application that supports working in offline mode. OOW 2013 Summary for Fusion Middleware Architects & Administrators | Simon Haslam Oracle ACE Director Simon Haslam shares a very thorough and detailed summary of the most interesting news coming out of Oracle OpenWorld 2013 for Fusion Middleware architects and administrators. Coherence Special Interest Group (SIG) – Sydney, October 24th If you're in the neighborhood... The Coherence Special Interest Group (SIG) in Sydney, Australia will be held on Thursday October 24th at the Park Hyatt Sydney, in The Rocks, between 9am and 5pm. The event will include presentations from customers, partners, and Coherence engineering team members and product managers. Click the link for more info. Free eBook: Oracle Multitenant for Dummies Oracle Multitenant for Dummies is a new e-book that provides a clear overview of the Oracle Database 12c multitenant architecture. It's free (registration required). Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 1: Introduction | Michael Rainey Michael Rainey launches a series of posts that guide you through "the architecture and setup for using GoldenGate with OBIA 11.1.1.7.1." Enriching XMLType data using relational data – XQuery and fn:collection in action | Lucas Jellema Another detailed technical post from the always prolific Oracle ACE Director Lucas Jellema. Webgate Reverse Proxy Farm | Vinay Kalra Vinay Kalra's blog post discusses architecture and recommendations for centralizing Webgate deployments onto a server farm. Free Poster: Adaptive Case Management in Practice Thanks to Masons of SOA member Danilo Schmiedel for providing a hi-res copy of the Adaptive Case Management poster, now available for download from the OTN ArchBeat Blog. Should your team use a framework? | Sten Vesterli "Some developers have an aversion to frameworks, feeling that it will be faster to just write everything themselves," observes Oracle ACE Director Sten Vesterli. He explains why that's a very bad idea in this short post. Integrating Custom BPM Worklist into WebCenter Portal | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis shares a sample application configured to run a custom BPM Worklist, and shares steps describing how to configure and access it from the WebCenter Portal. Thought for the Day "Morning comes whether you set the alarm or not." — Ursula K. Le Guin (Born October 21, 1929) Source: brainyquote.com

  Read the article

• WPF Control Toolkits Comparison for LOB Apps

  In preparation for a new WPF project Ive been researching options for WPF Control toolkits.  While we want a lot of the benefits of WPF, the application is a fairly typical line of business application (LOB).  So were not focused on things like media and animations, but instead a simple, solid, intuitive, and modern user interface that allows for well architected separation of business logic and presentation layers. While WPF is mature, it hasnt lived the long life that Winforms has yet, so there is still a lot of room for third party and community control toolkits to fill the gaps between the controls that ship with the Framework.  There are two such gaps I was concerned about.  As this is an LOB app, we have needs for presenting lots of data and not surprisingly much of it is in grid format with the need for high performance, grouping, inline editing, aggregation, printing and exporting and things that weve been doing with LOB apps for a long time.  In addition we want a dashboard style for the UI in which the user can rearrange and shrink and grow tiles that house the content and functionality.  From a cost perspective, building these types of well performing controls from scratch doesnt make sense.  So I evaluated what you get from the .NET Framework along with a few different options for control toolkits.  I tried to be fairly thorough, but know that this isnt a detailed benchmarking comparison or intense evaluation.  Its just meant to be a feature set comparison to be used when thinking about building an LOB app in WPF.  I tried to list important feature differences and notes based on my experience with the trial versions and what I found in documentation and reference materials and samples.  Ive also listed the importance of the controls based on how I think they are needed in LOB apps.  There are several toolkits available, but given I dont have unlimited time, I picked just a few.  Maybe Ill add on more later.  The toolkits I compared are: Teleriks RadControls for WPF since I had heard some good things about Telerik Infragistics NetAdvantage WPF since both I and the customer have some experience with the vendors tools WPF Toolkit on codeplex since many of my colleagues have used it Blacklight codeplex project which had WPF support for the Tile View control  (with Release 4.3 WPF is not going to be supported in favor of focusing only on SilverLight controls, so I dropped that from the comparison) Click Here to Download the WPF Control Toolkits Comparison Hopefully this helps someone out there.  Feel free to post a comment on your experiences or if you think something I listed is incorrect or missing.  Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• LDoms and Maintenance Mode

  - by Owen Allen

   I got a few questions about how maintenance mode works with LDoms. "I have a Control Domain that I need to do maintenance on. What does being put in maintenance mode actually do for a Control Domain?" Maintenance mode is what you use when you're going to be shutting a system down, or otherwise tinkering with it, and you don't want Ops Center to generate incidents and notification of incidents. Maintenance mode stops new incidents from being generated, but it doesn't stop polling, or monitoring, the system and it doesn't prevent alerts. "What does maintenance mode do with the guests on a Control Domain?" If you have auto recovery set and the Control Domain is a member of a server pool of eligible systems, putting the Control Domain in maintenance mode automatically migrates guests to an available Control Domain.  When a Control Domain is in maintenance mode, it is not eligible to receive guests and the placement policies for guest creation and for automatic recovery won't select this server as a possible destination. If there isn't a server pool or there aren't any eligible systems in the pool, the guests are shut down. You can select a logical domain from the Assets section to view the Dashboard for the virtual machine and the Automatic Recovery status, either Enabled or Disabled. To change the status, click the action in the Actions pane. "If I have to do maintenance on a system and I do not want to initiate auto-recovery, what do I have to do so that I can manually bring down the Control Domain (and all its Guest domains)?" Use the Disable Automatic Recovery action. "If I put a Control Domain into maintenance mode, does that also put the OS into maintenance mode?" No, just the Control Domain server. You have to put the OS into maintenance mode separately. "Also, is there an easy way to see what assets are in maintenance mode? Can we put assets into, or take them out of, maintenance mode on some sort of group level?" You can create a user-defined group that will automatically include assets in maintenance mode. The docs here explain how to set up these groups. You'll use a group rule that looks like this:

  Read the article

• Impossible to install Ubuntu 10.10 dual boot with Windows 7 on new Acer desktop computer

  - by Don Myers

  My brother has a brand new Acer Desktop with Windows 7. I have done many installs (40+) of Ubuntu starting with 8.10, and have never run into this. I've spent three hours trying to do a dual boot install of 10.10. When you get to the place where you normally would choose to install as a dual boot or overwrite the existing information on the hard drive, that block is just blank. Nothing. No choices even to do a manual partition setup. If you try to go on you get the message "No root file system is defined. Please correct this from the partitioning menu." but there is nothing in the partitioning menu. I tried a good 10.04 disc also. Same thing happens with it. I ran a gparted live cd, and it shows the hard drive as sda with 3 partitions on the original. sda1 is a small partition called PQService. sda2 is another small partition called System Reserved, and GParted says it is the boot partition. sda3 is the main partation with the operating system (Windows 7) and all of the empty space. There is a little unallocated space at the very beginning and very end of the hard drive. If I go to places in the Live CD, it shows a 640 gb hard disk called Acer, but it also shows a 640 gb hard disk called system reserved. They are the same disk. There is just one hard drive. If you click properties in the System Reserved 640 gb, it shows all information as unknown. I had to change the boot order in the bios in order to run the live cd. The hard drive instead of being listed as such is listed as Raid:Raid Ready. Something the way this computer is set up is preventing Ubuntu from being able to identify the hard drive partitions at all to do an install, even if you were not doing a dual boot and just wanted to overwrite Windows. Is this a bug that needs reported? This is a major problem for me and my brother, but also for Ubuntu if new users want to Ubuntu and find they cannot install it.

  Read the article

• Correcting color-shifted mirrored i915 driver in 12.04?

  - by Will Martin

  I was called in to fix a friend's malfunctioning HP Pavilion. She's not sure exactly which model, but the sticker on the bottom says "G60". The problem was a failed upgrade to 12.04. I was able to mostly repair it with sudo apt-get -f install, which ran setup and configuration for several hundred packages. The biggest problem at the moment is Xorg. The login screen (lightdm) loads normally but at a reduced resolution (1024x768 instead of 1366x768). But once you log in, it looks like this: Observe that the colors of the dock on the left and the bar at the top are normal. But the background is filled with bizarro color-skewed ghost images of the desktop. In all cases, the actual contents of any programs you run is a totally illegible mess, except that the bar at the top of any program windows looks and acts normally. And the ghost images are interactive! For example, if you click the icon in the top right corner to get the "shut down" menu, the same menu will appear in the ghost images below. Starting a terminal will start a terminal window in both the real desktop and the ghost images, and moving it around updates both the real and ghost desktops. I suspect Xorg is using some kind of wrong driver and/or parameter for the graphics hardware. Here is the graphics-relevant portion of the lspci -v output: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0a <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5110 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 3 Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Memory at d2500000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 I'm not sure what to check next. I would ordinarily check xorg.conf to see what it says, but that apparently doesn't exist any more, and my googling has not yielded any useful techniques for getting Xorg to tell me what settings it decided to use. The weird part is that it works fine on the login screen. It's only when you actually log in as a user that the display gets screwed up. Suggestions?

  Read the article

• LCM says Smart List import is complete but actually its not...Here are probable reasons

  - by RahulS

  First of all some basics of smart list: Administrators use Smart Lists to create custom drop-down lists that users access from data form cells. When clicking in cells whose members are associated with a Smart List (as a member property), users select items from drop-down lists instead of entering data. Users cannot type in cells that contain Smart Lists. Smart Lists display in cells as down arrows that expand when users click into the cells. Below link will give you more information on Smart Lists: http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/enum_pg.html I got a simple query today, "The LCM process generates and indicates a status of "Complete", however, the 3,018 records do not appear in the Planning application. No error exists in the log to identify the problem." Things which can be checked in this case: 1. Spaces are not allowed in the Entry Name, 2. Spaces are allowed in the Entry Label, 3. The name must start with an alpha character or underscore, 4. Valid characters for the remaining part of the name must be alpha, numeric, or an underscore, 5. Enter a name that is unique within the smart list, 6. I am not sure about the limits but I have seen 22,000 members loaded fine, 7. ID for every entry should be unique,  8. IDs need not to be consecutive, Ex: It was go from 1 to 100 then 500 to 900 then 1900 to 4500 etc. While import .xml file using LCM there were no errors in the foundation and LCM migration logs, but when checked in the HyS9PlanningSysErr.log, few errors were found:Ex: The name Data_Coord_(Prod)_ACS is invalid, The name Sr_Dir_b+Medcd_Gvt_Rel_Sls_Mkt is invalid, The name entered is invalid. Enter a name that is unique within the smart list, Also, we can Load Smart List dimensions and Smart List dimension entries using the /DS:HSP_SMARTLISTS parameter in outlineload utility: OutlineLoad /A:acpt /U:admin /M /I:c:/smartlist_create1.csv /DS:HSP_SMARTLISTS /L:c:/OutlineLogs/outlineLoad.log /X:c:/OutlineLogs/outlineLoad.exc SmartList Name, Operation, Label, Display Order, Missing Label, Use Form Missing Label, Entry ID, Entry Name, Entry Label SL1,addsmartlist,SL1Label,,,,,, SL1,addEntry,,,,,,entry1,entrylabel1 SL1,addEntry,,,,,,entry2,entrylabel2 Cheers..!!! Rahul S. http://www.facebook.com/pages/HyperionPlanning/117320818374228

  Read the article

• Configuring the iPlanet as web tier for Oracle WebCenter Content (UCM)

  - by Adao Junior

  If you are looking for configure the iPlanet as Web server/proxy to use with the Oracle WebCenter Content, you probably won’t found an specific documentation for that or will found some old complex notes related to the old 10gR3. This post will help you out with few simple steps. That’s the diagram of the test scenario, considering that you will deploy in production in an cluster environment. First you need the software, for our scenario you will need: - Oracle iPlanet Web Server 7.0.15+ (Installed) - Oracle WebCenter Content 11gR1 PS5 (Installed) - Oracle WebLogic Web Server Plugins 11g (1.1) - Supported JDK (Using Oracle Java JDK 7u4 for the test) - Certified Client OS - Certified Server OS (Using Oracle Solaris 11 for the test) - Certified Database (Using Oracle Database 11.2.0.3 for the test) Then the configuration: - Download the latest plugin: http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html - Extract the WLSPlugin11g-iPlanet7.0 in some folder, like <iPlanet_Home>/plugins/wls11 - Include the plugin reference to the magnus.conf: If Unix (Solaris or Linux), include the line: Init fn="load-modules" shlib="/apps/oracle/WebServer7/plugins/wls11/lib/mod_wl.so" If Windows, Include the line:        Init fn="load-modules" shlib="D:\\oracle\\WebServer7\\plugins\\wls11\\lib\\mod_wl.dll" - Include the proxy reference to the obj.conf of each instance: <Object name="weblogic" ppath="*/cs/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_dav/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/_ocsh/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object>   <Object name="weblogic" ppath="*/adfAuthentication/*"> Service fn="wl-proxy" WebLogicCluster="wcc-node1:16201,wcc-node2:16202, wcc-node3:16203" </Object> If you are using an single node setup, change the Service fn=…. line to something like: Service fn="wl-proxy" WebLogicHost=<wcc-server> WebLogicPort=16200 With these configurations, your should have the WebCenter Content UI working with the iPlanet, test it. [http://<web-server>/cs/] With the UI working, the last step is to configure the WebDav: - Go to the iPlanet Admin Console (usually https://<web-server>:8989) - Go to Configurations >> [instance] >> Virtual Servers >> [Virtual Server] >> WebDAV: - Click New - Populate the URI with /cs/idcplg/webdav: - Select “Anyone (No Authentication)”, the wc Content will take care of the security: This will allow you to use the WebDav feature and the Desktop Integration Suite, including double-byte characters. Anothers iPlanet tunes could be done, I can cover in the next post related to the iPlanet. Cross-posted on the ContentrA.com Blog Related posts:  - Using a Web Proxy Server with WebCenter Family

  Read the article

• SCVMM – Round 2 – How to create a Private Cloud using PowerShell

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2013/06/28/scvmm--round-2--how-to-create-a-private.aspxHave you ever seen "A Bridge too far" movie? To not to wake up a click too far, it is good to script some tasks. Yes of course we can follow wizards, but some of us want to be warriorsJ. A small tip, take a look on credentials and system GUID examples. I don't know how about you, but for me it will be really useful in the future.    # credents$credential = Get-CredentialNew-SCRunAsAccount -Name "TESTDOMAIN\Administrator" -Credential $credential #storage $opsMgrServerCredential = Get-SCRunAsAccount -Name "TESTDOMAIN\Administrator"New-SCStorageClassification -Name "Bronze" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Silver" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Gold" -Description "" –RunAsynchronously # add a shared storageFind-SCComputer -ComputerName "dc.TESTDOMAIN.net"Add-SCStorageProvider -AddWindowsNativeWmiProvider -Name "dc.TESTDOMAIN.net" -RunAsAccount $opsMgrServerCredential -ComputerName "dc.TESTDOMAIN.net"$fileServer = Get-SCStorageFileServer "dc.TESTDOMAIN.net"$fileShares = @()$fileShares += Get-SCStorageFileShare -Name "VMMLibrary"Set-SCStorageFileServer -StorageFileServer $fileServer -AddStorageFileShareToManagement $fileShares –RunAsynchronously #fabric network$logicalNetwork = New-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinitionIsolation $false -EnableNetworkVirtualization $true -UseGRE $true -IsPVLAN $false$allHostGroups = @()$allHostGroups += Get-SCVMHostGroup -Name "All Hosts"$allSubnetVlan = @()$allSubnetVlan += New-SCSubnetVLan -Subnet "10.0.0.0/24" -VLanID 0New-SCLogicalNetworkDefinition -Name "TESTDOMAIN-Service-Network_0" -LogicalNetwork $logicalNetwork -VMHostGroup $allHostGroups -SubnetVLan $allSubnetVlan #IP pool$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$logicalNetworkDefinition = Get-SCLogicalNetworkDefinition -LogicalNetwork $logicalNetwork -Name "TESTDOMAIN-Service-Network_0" # Gateways$allGateways = @()$allGateways += New-SCDefaultGateway -IPAddress "10.0.0.1" –Automatic# DNS servers $allDnsServer = @("10.0.0.1")# DNS suffixes$allDnsSuffixes = @("TESTDOMAIN.net")# WINS servers$allWinsServers = @()New-SCStaticIPAddressPool -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinition $logicalNetworkDefinition -Subnet "10.0.0.0/24" -IPAddressRangeStart "10.0.0.51" -IPAddressRangeEnd "10.0.0.75" -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes –RunAsynchronously #Hyper-V Virtual Networks$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" $vmNetwork = New-SCVMNetwork -Name "TESTDOMAIN-VMN" -LogicalNetwork $logicalNetwork -IsolationType "WindowsNetworkVirtualization" -CAIPAddressPoolType "IPV4" -PAIPAddressPoolType "IPV4"Write-Output $vmNetwork$subnet = New-SCSubnetVLan -Subnet "10.0.0.0/24"New-SCVMSubnet -Name "Con-SN" -VMNetwork $vmNetwork -SubnetVLan $subnet # bind VLAN with the Network Adapter$vmHost = Get-SCVMHost -ComputerName "VMM01.TESTDOMAIN.net"$vmHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $vmHost #-Name "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)"Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -Description "" -AvailableForPlacement $true -UsedForManagement $true $logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -AddOrSetLogicalNetwork $logicalNetworkSet-SCVMHost -VMHost $vmHost -RunAsynchronously -NumaSpanningEnabled $true #Create a Private Cloud$Guid = [System.Guid]::NewGuid()Set-SCCloudCapacity -JobGroup $Guid -UseCustomQuotaCountMaximum $false -UseMemoryMBMaximum $false -UseCPUCountMaximum $false -UseStorageGBMaximum $false -UseVMCountMaximum $false -CustomQuotaCount 10 -MemoryMB 10240 -CPUCount 10 -StorageGB 386 -VMCount 10$resources = @()$resources += Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$resources += Get-SCLoadBalancer -Manufacturer "Microsoft"$readonlyLibraryShares = @()$readonlyLibraryShares += Get-SCLibraryShare | where { $_.LibraryServer.Name -eq "dc.TESTDOMAIN.net" -and $_.Name -eq "VMMLibrary" }$addCapabilityProfiles = @()$addCapabilityProfiles += Get-SCCapabilityProfile -Name "Hyper-V"$Guid2 = [System.Guid]::NewGuid()Set-SCCloud -JobGroup $Guid2 -RunAsynchronously -AddCloudResource $resources -AddReadOnlyLibraryShare $readonlyLibraryShares -AddCapabilityProfile $addCapabilityProfiles$hostGroups = @()$hostGroups += Get-SCVMHostGroup -Name "TESTDOMAIN"New-SCCloud -VMHostGroup $hostGroups -Name "TESTDOMAIN-Cloud" -Description "" –RunAsynchronously

  Read the article

• Determining cause of random latency and loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of CSS and JS files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well.

  Read the article

• Using a SQL Prompt snippet with template parameters

  - by SQLDev

  As part of my product management role I regularly attend trade shows and man the Red Gate booth in the vendor exhibition hall. Amongst other things this involves giving product demos to customers. Our latest demo involves SQL Source Control and SQL Test in a continuous integration environment. In order to demonstrate quite how easy it is to set up our tools from scratch we start the demo by creating an entirely new database to link to source control, using an individual database name for each conference attendee. In SQL Server Management Studio this can be done either by selecting New Database from the Object Explorer or by executing “CREATE DATABASE DemoDB_John” in a query window. We recently extended the demo to include SQL Test. This uses an open source SQL Server unit testing framework called tSQLt (www.tsqlt.org), which has a CLR object that requires EXTERNAL_ACCESS to be set as follows: ALTER DATABASE DemoDB_John SET TRUSTWORTHY ON This isn’t hard to do, but if you’re giving demo after demo, this two-step process soon becomes tedious. This is where SQL Prompt snippets come into their own. I can create a snippet named create_demo_db for this following: CREATE DATABASE DemoDB_John GO USE DemoDB_John GO ALTER DATABASE DemoDB_John SET TRUSTWORTHY ON Now I just have to type the first few characters of the snippet name, select the snippet from SQL Prompt’s candidate list, and execute the code. Simple! The problem is that this can only work once due to the hard-coded database name. Luckily I can leverage a nice feature in SQL Server Management Studio called Template Parameters. If I modify my snippet to be: CREATE DATABASE <DBName,, DemoDB_> GO USE <DBName,, DemoDB_> GO ALTER DATABASE <DBName,, DemoDB_> SET TRUSTWORTHY ON Once I’ve invoked the snippet, I can press Ctrl-Shift-M, which calls up the Specify Values for Template Parameters dialog, where I can type in my database name just once. Now you can click OK and run the query. Easy. Ideally I’d like for SQL Prompt to auto-invoke the Template Parameter dialog for all snippets where it detects the angled bracket syntax, but typing in the keyboard shortcut is a small price to pay for the time savings.

  Read the article

• New Oracles VM RAC template with support for oracle vm 3 built-in

  - by wcoekaer

  The RAC team did it again (thanks Saar!) - another awesome set of Oracle VM templates published and uploaded to My Oracle Support. You can find the main page here. What's special about the latest version of DeployCluster is that it integrates tightly with Oracle VM 3 manager. It basically is an Oracle VM frontend that helps start VMs, pass arguments down automatically and there is absolutely no need to log into the Oracle VM servers or the guests. Once it completes, you have an entire Oracle RAC database setup ready to go. Here's a short summary of the steps : Set up an Oracle VM 3 server pool Download the Oracle VM RAC template from oracle.com Import the template into Oracle VM using Oracle VM Manager repository - import Create a public and private network in Oracle VM Manager in the network tab Configure the template with the right public and private virtual networks Create a set of shared disks (physical or virtual) to assign to the VMs you want to create (for ASM/at least 5) Clone a set of VMs from the template (as many RAC nodes as you plan to configure) With Oracle VM 3.1 you can clone with a number so one clone command for, say 8 VMs is easy. Assign the shared devices/disks to the cloned VMs Create a netconfig.ini file on your manager node or a client where you plan to run DeployCluster This little text file just contains the IP addresses, hostnames etc for your cluster. It is a very simple small textfile. Run deploycluster.py with the VM names as argument Done. At this point, the tool will connect to Oracle VM Manager, start the VMs and configure each one, Configure the OS (Oracle Linux) Configure the disks with ASM Configure the clusterware (CRS) Configure ASM Create database instances on each node. Now you are ready to log in, and use your x node database cluster. x No need to download various products from various websites, click on trial licenses for the OS, go to a Virtual Machine store with sample and test versions only - this is production ready and supported. Software. Complete. example netconfig.ini : # Node specific information NODE1=racnode1 NODE1VIP=racnode1-vip NODE1PRIV=racnode1-priv NODE1IP=192.168.1.2 NODE1VIPIP=192.168.1.22 NODE1PRIVIP=10.0.0.22 NODE2=racnode2 NODE2VIP=racnode2-vip NODE2PRIV=racnode2-priv NODE2IP=192.168.1.3 NODE2VIPIP=192.168.1.23 NODE2PRIVIP=10.0.0.23 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=mydomain.com DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=racnode12-scan SCANIP=192.168.1.50

  Read the article

• Token based Authentication and Claims for Restful Services

  - by Your DisplayName here!

  WIF as it exists today is optimized for web applications (passive/WS-Federation) and SOAP based services (active/WS-Trust). While there is limited support for WCF WebServiceHost based services (for standard credential types like Windows and Basic), there is no ready to use plumbing for RESTful services that do authentication based on tokens. This is not an oversight from the WIF team, but the REST services security world is currently rapidly changing – and that’s by design. There are a number of intermediate solutions, emerging protocols and token types, as well as some already deprecated ones. So it didn’t make sense to bake that into the core feature set of WIF. But after all, the F in WIF stands for Foundation. So just like the WIF APIs integrate tokens and claims into other hosts, this is also (easily) possible with RESTful services. Here’s how. HTTP Services and Authentication Unlike SOAP services, in the REST world there is no (over) specified security framework like WS-Security. Instead standard HTTP means are used to transmit credentials and SSL is used to secure the transport and data in transit. For most cases the HTTP Authorize header is used to transmit the security token (this can be as simple as a username/password up to issued tokens of some sort). The Authorize header consists of the actual credential (consider this opaque from a transport perspective) as well as a scheme. The scheme is some string that gives the service a hint what type of credential was used (e.g. Basic for basic authentication credentials). HTTP also includes a way to advertise the right credential type back to the client, for this the WWW-Authenticate response header is used. So for token based authentication, the service would simply need to read the incoming Authorization header, extract the token, parse and validate it. After the token has been validated, you also typically want some sort of client identity representation based on the incoming token. This is regardless of how technology-wise the actual service was built. In ASP.NET (MVC) you could use an HttpModule or an ActionFilter. In (todays) WCF, you would use the ServiceAuthorizationManager infrastructure. The nice thing about using WCF’ native extensibility points is that you get self-hosting for free. This is where WIF comes into play. WIF has ready to use infrastructure built-in that just need to be plugged into the corresponding hosting environment: Representation of identity based on claims. This is a very natural way of translating a security token (and again I mean this in the widest sense – could be also a username/password) into something our applications can work with. Infrastructure to convert tokens into claims (called security token handler) Claims transformation Claims-based authorization So much for the theory. In the next post I will show you how to implement that for WCF – including full source code and samples. (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Multithreading: Communication from Parent thread to child thread

  - by Dennis Nowland

  I have a List of threads normally 3 threads each of the threads reference a webbrowser control that communicates with the parent control to populate a datagridview. What I need to do is when the user clicks the button in a datagridviewButtonCell corresponding data will be sent back to the webbrowser control within the child thread that originally communicated with the main thread. but when I try to do this I receive the following error message 'COM object that has been separated from its underlying RCW cannot be used.' my problem is that I can not figure out how to reference the relevant webbrowser control. I would appreciate any help that anyone can give me. The language used is c# winforms .Net 4.0 targeted Code sample: The following code is executed when user click on the Start button in the main thread private void StartSubmit(object idx) { /* method used by the new thread to initialise a 'myBrowser' inherited from the webbrowser control each submitters object is an a custom Control called 'myBrowser' which holds detail about the function of the object eg: */ //index: is an integer value which represents the threads id int index = (int)idx; //submitters[index] is an instance of the 'myBrowser' control submitters[index] = new myBrowser(); //threads integer id submitters[index]._ThreadNum = index; // naming convention used 'browser' +the thread index submitters[index].Name = "browser" + index; //set list in 'myBrowser' class to hold a copy of the list found in the main thread submitters[index]._dirs = dirLists[index]; // suppress and javascript errors the may occur in the 'myBrowser' control submitters[index].ScriptErrorsSuppressed = true; //execute eventHandler submitters[index].DocumentCompleted += new WebBrowserDocumentCompletedEventHandler(DocumentCompleted); //advance to the next un-opened address in datagridview the navigate the that address //in the 'myBrowser' control. SetNextDir(submitters[index]); } private void btnStart_Click(object sender, EventArgs e) { // used to fill list<string> for use in each thread. fillDirs(); //connections is the list<Thread> holding the thread that have been opened //1 to 10 maximum for (int n = 0; n < (connections.Length); n++) { //initialise new thread to the StartSubmit method passing parameters connections[n] = new Thread(new ParameterizedThreadStart(StartSubmit)); // naming convention used conn + the threadIndex ie: 'conn1' to 'conn10' connections[n].Name = "conn" + n.ToString(); // due to the webbrowser control needing to be ran in the single //apartment state connections[n].SetApartmentState(ApartmentState.STA); //start thread passing the threadIndex connections[n].Start(n); } } Once the 'myBrowser' control is fully loaded I am inserting form data into webforms found in webpages loaded via data enter into rows found in the datagridview. Once a user has entered the relevant details into the different areas in the row the can then clicking a DataGridViewButtonCell that has tha collects the data entered and then has to be send back to the corresponding 'myBrowser' object that is found on a child thread. Thank you

  Read the article

• WebCenter Customer Spotlight: Global Village Telecom Ltda

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryGlobal Village Telecom Ltda. (GVT)  is a leading Brazilian telecommunications company, developing solutions and providing services for corporate and end users. GVT is located in Curitiba, Brazil, employs 6,000 people and has an annual revenue of around US$1 billion.  GVT business objectives were to improve corporate communications, accelerate internal information flow, provide continuous access to the all business files and  enable the company’s leadership to provide information to all departments in real time. GVT implemented Oracle WebCenter Content to centralize the company's content and they built  a portal to share and find content in real-time. Oracle WebCenter Content enabled GVT to quickly and efficiently integrate communication among all company employees—ensuring that GVT maintain a competitive edge in the market. Human Resources reduced the time required for issuing internal statements to all staff from three weeks to one day. Company OverviewGlobal Village Telecom Ltda. (GVT)  is a leading telecommunications company, developing solutions and providing services for corporate and end users. The company offers diverse innovative products and advanced solutions in conventional fixed telephone communications, data transmission, high speed broadband internet services, and voice over IP (VoIP) services for all market segment. GVT is located in Curitiba, Brazil, employs 6,000 people and have an  annual revenue of around US$1 billion.   Business ChallengesGVT business objectives were to improve corporate communications, accelerate internal information flow, provide continuous access to the all business files and enable the company’s leadership to provide information to all departments in real time. Solution DeployedGVT worked with the Oracle Partner IT7 to deploy Oracle WebCenter Content to securely centralize the company's content such as growth indicators, spreadsheets, and corporate and descriptive project schedules. The solution enabled real-time information sharing through the development of Click GVT, a portal that currently receives 100,000 monthly impressions from employee searches. Business ResultsGVT gained a competitive edge in the communications market by accelerating internal information flow, streamlining the content standardizing information and enabled real-time information sharing and discovery. Human Resources  reduced the time required for issuing  internal statements to all staff from three weeks to one day. “The competitive nature of telecommunication industry demands rapid information in the internal flow of the company. Oracle WebCenter Content enabled us to quickly and efficiently integrate communication among all company employees—ensuring that we maintain a competitive edge in the market.” Marcel Mendes Filho, Systems Manager, Global Village Telecom Ltda. Additional Information Global Viallage Telecom Ltda Customer Snapshot Oracle WebCenter Content

  Read the article

• Solution for developers wanting to run a standalone WLS 10.3.6 server against JDev 11.1.1.6.0

  - by Chris Muir

  In my previous post I discussed how to install the 11.1.1.6.0 ADF Runtimes into a standalone WLS 10.3.6 server by using the ADF Runtime installer, not the JDeveloper installer.  Yet there's still a problem for developers here because JDeveloper 11.1.1.6.0 comes coupled with a WLS 10.3.5 server.  What if you want to develop, deploy and test with a 10.3.6 server?  Have we lost the ability to integrate the IDE and the WLS server where we can run and stop the server, deploy our apps automatically the server and more? JDeveloper actually solved this issue sometime back but not many people will have recognized the feature for what it does as it wasn't needed until now. Via the Application Server Navigator you can create 2 types of connections, one to a remote "standalone WLS" and another to an "integrated WLS".  It's this second option that is useful because what we can do is install a local standalone WLS 10.3.6 server on our developer PC, then create a separate "integrated WLS" connection to the standalone server.  Then by accessing your Application's properties through the Application menu -> Application Properties -> Run -> Bind to Integration Application Server option we can choose the newly created WLS server connection to work with our application. In this way JDeveloper will now treat the new server as if it was the integrated WLS.  It will start when we run and deploy our applications, terminate it at request and so on.  Of course don't forget you still need to install the ADF Runtimes for the server to be able to work with ADF applications. Note there is bug 13917844 lurking in the Application Server Navigator for at least JDev 11.1.1.6.0 and earlier.  If you right click the new connection and select "Start Server Instance" it will often start one of the other existing connections instead (typically the original IntegratedWebLogicServer connection).  If you want to manually start the server you can bypass this by using the Run menu -> Start Server Instance option which works correctly.

  Read the article

• Own a KINECT for MS-XBOX before anyone does

  Following is the announced by Richik Nandi from Microsoft team. Dear Customer, We believe that our privileged customers shouldn't have to wait for good things. So, here's a special offer exclusively for you. Be one of the first in India to own and experience Kinect for XBOX 360, few days before it is even launched in stores. Introducing the new Kinect for XBOX 360®. Kinect needs no controllers. You are the controller. Kinect brings games and entertainment to life in extraordinary new ways without using a controller. The sensor recognizes your face, eyes and body movements to deliver a superb gaming experience. Easy to use and great fun, Kinect gets everyone off the couch. See a ball? Kick it. Want to join a friend in the fun? Simply jump in. Imagine controlling movies and music with the wave of a hand or the sound of your voice! Kinect is all about fun for you and your family. And the best part is Kinect works with every Xbox 360®. There are two options you can choose from: •  Kinect sensor + 4GB Xbox 360 bundle + Kinect Adventures game at Rs 22,990/-and get Dance Central game worth Rs 1999 from Redington, 20% discount voucher from Starwood on food and beverages, T-shirt from PUMA and a Kinect adventure live card absolutely free using your unique promo code : XbTXXZl2Sb •  Kinect Sensor at Rs 9,500/-and get 20% discount voucher from Starwood on food and beverages, T-shirt from PUMA and a Kinect adventure live card absolutely free using your unique promo code : lDg6o8SuYh We want you to own your Kinect before the official launch. The promotion closes by 10th November. To know more about Kinect click here. To book your Kinect PRE-ORDER now! Enter your details along with the above mentioned promo code to avail of the free gifts offer. We will have your Kinect delivered by 19th November 2010. Enjoy being the controller. Enjoy the Kinect. span.fullpost {display:none;}

  Read the article

• Is anyone doing "real" TDD with Visual-C++, and if yes, how do they do it?

  - by Martin

  Test Driven Development implies writing the test before the code and following a certain cycle: Write Test Check Test (run) Write Production Code Check Test (run) Clean up Production Code Check test (run) As far as I'm concerned, this is only possible if your development solution allows you to very quickly switch between the production and test code, and to execute the test for a certain production code part extremely quickly. Now, while there exist lots of Unit Testing Frameworks for C++ (I'm using Bost.Test atm.) it does seem that there doesn't really exist any decent (for native C++) Visual Studio (Plugin) solution that makes the TDD cycle bearable regardless of framework used. "Bearable" means that it's a one-click action to run a test for a certain cpp file without having to manually set up a separate testing project etc. "Bearable" also means that a simple test starts (linking!) and runs very quickly. So, what tools (plugins) and techniques are out there that make the TDD cycle possible for native C++ development with Visual Studio? Note: I'm fine with free or "commercial" tools. Please: No framework recommendations. (Unless the framework has a dedicated Visual Studio plugin and you want to recommend the plugin.) Edit Note: The answers so far have provided links on how to integrate a Unit Testing framework into Visual Studio. The resources more or less describe how to get the UT framework to compile and get your first Tests running. This is not what this question is about. I'm of the opinion that to really work productively, having the Unit Tests in a manually maintained(!), separate vcproj from your production classes will add so much overhead that TDD "isn't possible". As far as I am aware, you do not add extra "projects" to a Java or C# thing to enable Unit Tests and TDD, and for a good reason. This should be possible with C++ given the right tools, but it seems (this question is about) that there are very little tools for TDD/C++/VS. Googling around, I've found one tool, VisualAssert, that seems to aim in the right direction. However, afaiks, it doesn't seem to be in widespread use (compared to CppUnit, Boost.Test etc.). Edit: I would like to add a comment to the context for this question. I think it does a good summary of outlining (part of) the problem: (comment by Billy ONeal) Visual Studio does not use "build scripts" that are reasonably editable by the user. One project produces one binary. Moreover, Java has the property that Java never builds a complete binary -- the binary you build is just a ZIP of the class files. Therefore it's possible to compile separately then JAR together manually (using e.g. 7z). C++ and C# both actually link their binaries, so generally speaking you can't write a script like that. The closest you can get is to compile everything separately and then do two linkings (one for production, one for testing).

  Read the article

• Data Generator Source Adapter

  This component needs little explanation. It generates random integer (DT_I4) and string (DT_WSTR) data and places them in the pipeline. You specify how many columns of each you would like and for any string columns you pass a fixed length value. You then need to specify how many rows in total you require to be generated. This component is used by us to do testing of the pipeline and components downstream. Previously we would have used a script component (as a source) to generate the rows but found ourselves rewriting the code too often so created this component. Screenshots SQL Server 2005 Integration Services SQL Server 2008/2012 Integration Services The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Data Generator Source from the list. Downloads The Data Generator Source Adapter is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Data Generator Source Adapter for SQL Server 2005 Data Generator Source Adapter for SQL Server 2008 Data Generator Source Adapter for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.30 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.29 - SQL Server 2008 February 2008 CTP. Includes support for upgrade of 2005 packages. Simplified user interface. (4 Mar 2008) Version 2.0.0.27 - SQL Server 2008 November 2007 CTP. String columns will now use the default system code page. Previously string columns always used 1252. (15 Feb 2008) SQL Server 2005 Version 1.1.0.23 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.0.0 - SQL Server 2005 IDW 16 Sept CTP. Public release. (6 Oct 2005)

  Read the article

< Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >