Search Results

Search found 25180 results on 1008 pages for 'post processing'.

Page 783/1008 | < Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >

• Diagnosing PCI issues

  - by dtsazza

  I'm upgrading a PC for a friend, and have run into a problem with upgrading the motherboard. I've been assembling custom PCs for the best part of a decade now, so I'm happy enough with the basics at the very least. The motherboard, CPU and graphics card were all updated at once - after this was done, the machine POSTs but the PCI wireless card, as well as the PCI-E graphics card, do not seem to be recognised at all by the system. No trace of them anywhere in the BIOS, or the POST output, or in Windows. I booted into Linux and ran an lspci which also showed up no sign of them. What is the best step to go about diagnosing this? Is it likely/feasible that the motherboard's PCI bus is just defective and it needs to be RMAed? Are there any other common gotchas that might cause these symptoms? For reference, the components in question are: CPU: Celeron E1400 Motherboard: Gigabyte GA-G31M-ES2L Graphics card: TBC (a low end card from a couple of years ago; worked flawlessly before the mobo change) PCI WNIC: Edimax 7128G Thanks in advance for any help.

  Read the article

• Domain names timing out after VPS IP change

  - by Fourjays

  I rent a CentOS 5 VPS from a UK-based provider, with DirectAdmin also installed. On Thursday night, they carried out planned maintenance to changed the two IPs I had been assigned to two new ones. On Friday, after the change had taken place, I updated my domain name records to reflect the IP change. Since then, all of the domains pointing to the VPS are timing out. Additionally, DirectAdmin was also not responding, but was was resolved by running the ipswap scripts as found in the DirectAdmin knowledgebase. It did not fix my domains though. I have contacted the VPS provider but I have been waiting for a response for some time now. I have checked again, and again, and all the IPs referenced in DirectAdmin are correct. If I go to the server IP in my browser it responds with "Apache is functioning normally." Email accounts on the server are also functioning correctly. But if I access a domain itself, it times out. Running a ping and a DNS look-up, I can confirm the nameserver IPs are correct. If I run a trace route it reaches an IP that is similar to my VPS IPs (last 2 blocks are different) before timing out (it never shows my server IP). I am relatively new to VPS management so don't have a vast wealth of experience with troubleshooting problems on them. I have checked all of the httpd configuration files, which don't seem to have any IP references in them at all. Looking in the Apache error logs, what errors there are do not coincide with times I have tried to access the site. Is this issue at my provider's end? Is there anything else I can check or test, to rule out post-IP-change problems with my server configuration? It was all running fine prior to the IP change.

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• Can I use IIS to do ActiveDirectory single-sign-on for another website?

  - by brofield

  I'm trying to add Active Directory single-sign-on support to an existing SOAP server. The server can be configured to accept a trusted reverse-proxy and use the X-Remote-User HTTP header for the authenticated user. I want to configure IIS to be the trusted proxy for this service, so that it handles all of the Active Directory authentication for the SOAP server. Basically IIS would have to accept HTTP connections on port X and URL Y, do all the authentication, and then proxy the connection to a different server (most likely the same X and Y). Unfortunately, I have no knowledge of IIS or AD (so I am trying my best to learn enough to build this solution) so please be gentle. I would assume that this is not an uncommon scenario, so is there some easy way to do this? Is this sort of functionality built into IIS or do I need to build some sort of IIS proxy program myself? Is there a better option for getting the authentication done and the X-Remote-User HTTP header set than requiring IIS? Update: For example, what I am trying to create is: [CLIENT] [IIS] [AD] [SOAP-SERVER] 1. |---------------->| 2. |<--------------->|<---------->| 3. |--------------------------->| 4. |<---------------------------| 5. |<----------------| 1. POST to http://example.com/foo/bar.cgi 2. Client is not authenticated, so do authentication 3. Once validated, send request to server (X-Remote-User: {userid}) 4. Process request, send response 5. Forward response to client I need to know how to configure IIS to do the automatic authentication of the user using AD, and then to proxy the request to the actual server, sending the userid in the X-Remote-User HTTP header.

  Read the article

• Connect Chrome to TOR

  - by Jack M

  I'm having difficulty connecting Chrome to TOR. I started trying yesterday. I started Vidalia and the TOR Browser and then followed the advice at http://lifehacker.com/5614732/create-a-tor-button-in-chrome-for-on+demand-anonymous-browsing - downloading Proxy Switchy and setting it up as stated. This resulted in Error 130 (net::ERR_PROXY_CONNECTION_FAILED) (in Chrome, when I tried to load a webpage). So I looked into Vidalia's settings and noticed that it appeared to be using port 9051, so I set that instead of 8118 as everyone on the internet seems to be suggesting. Then I got a new error: Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED). Digging a bit, I found that Tor should be set as a SOCKS proxy, not an HTTP proxy, so I unticked "use same settings for all protocols" in Proxy Switchy and just set localhost:9051 for SOCKS. That got me Error 7 (net::ERR_TIMED_OUT). And that's when I came here for help. I typed up the above question, but then at the last minute decided to do a bit more reading and found someone here suggested using some command line arguments via a Windows shortcut: "C:\snip\chrome.exe" --proxy-server=";socks=127.0.0.1:9051;sock4=127.0.0.1:9051;sock5=127.0.0.1:9051" --incognito check.torproject.org And that worked perfectly. Yesterday. Today it doesn't, so I'm having to post this question after all. check.torproject.org gives me a "no" with Chrome, but a "yes" with the default Tor Browser. I tried closing Chrome and restarting it (yes, with the correct shortcut) after Vidalia started, but still nothing. The port number hasn't changed or anything. What gives? EDIT: I realized I had a "non tor" instance of Chrome running and that possibly the was causing the command line args t be ignored when I started the new instance. Closed all instances of chrome and ran my Chrome Tor shortcut, and it did get rid of the "not using Tor" message -- because I got another Time Out error instead. Vidalia's bandwidth graph didn't even blink.

  Read the article

• hard drive recognized by bios but not by windows

  - by tehgeekmeister

  I'm adding a new hard drive (A seagate ST31000340NS; I had links in here but I don't have enough reputation to post them. Interestingly, the bios recognizes it as a ST31000340AS, but it was bought as the other number...) to a friend's hp pavilion d4650e (mobo specs; google the model if you want the rest of the info, can't do more than one link.). Have had a hell of a time with it. Finally figured out that the hard drive needed a jumper set to limit the speed to 1.5gbps so the mobo would recognize it, and the bios DOES recognize it now. But not windows (using windows 7), using add new hardware or diskmgmt.msc. According to my friend, who was at the computer when it first booted after adding the jumper, a new hardware found dealio popped up saying something about raid, but I can't provide more info then that since I didn't see it. Ubuntu livecd recognized the drive before we changed the jumper. Haven't checked since then. XP didn't recognize it, that's the OS we started with. Upgraded to 7 hoping it might fix the problem. The only other info I can think of that might be immediately relevant is that the drive is plugged into the fifth sata channel, and the first channel is empty. Is this a problem? I assume not, because the two other drives (in a raid 0) and the cd and dvd drives are also on channels past the first one, and are recognized. Ask questions and I'll update with info!

  Read the article

• OpenVZ with brdiged interfaces and VLAN

  - by Deimosfr

  Hi, I've got a problem with OpenVZ with brdiged VLAN. Here is my configuration : +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN working on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110 : inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seams working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks like ok, but when I start my VE, here is the message : ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please ? Thanks

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• What are the possible disadvantages of enabling the "data access" server option in sys.servers for t

  - by Corp. Hicks

  We plan to change the default server options of an SQL2k5 server instance by enabling data access. The reason is that we want to run "SELECT * FROM OPENQUERY(LOCALSERVER, '...')" -like statements on the server. What are the possible disadvantages of enabling server option "data access" (alias sys.servers.is_data_access_enabled) for the local server (sys.servers.server_id = 0)? (There must be a reason for MS setting this option to disabled by default...) EDIT: it turns out that I'm not the first person to ask this question: http://sqlblogcasts.com/blogs/piotr_rodak/archive/2009/11/22/data-access-setting-on-local-server.aspx "The DATA ACCESS server option is not very well documented in my opinion - the Books On Line say it is a property of linked servers. It doesn't mention at all that you actually can have it enabled on your local server to enable OPENQUERY calls. I noticed that when you disable DATA ACCESS on a linked server, you can't query any table located on it (I tested it on my loopback server) neither using OPENQUERY nor four-part naming convention. You can still call procedures (with four-part naming) that return rowsets. Well, the interesting question is why it is disabled by default on local server - I suppose to discourage users from using OPENQUERY against it." It also seems that the author of the post (Pjotr Rodak) is a Stack Overflow user :-)

  Read the article

• Turn off monitor (energy saving) while in text console mode (in Linux)

  - by Denilson Sá

  How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup. The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen) But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor? (maybe I should (cross-)post this question to http://unix.stackexchange.com/ )

  Read the article

• Scriptable BitTorrent clients?

  - by James McMahon

  In an effort further automate all the little computer house keeping tasks that can waste my time I am looking into BitTorrent clients that have the ability to script common tasks. I've done some Googling and it looks like Transmission might have some of said such capabilities, but there site wasn't very clear on the details. Things I am looking to do; Prioritize and label torrents based on trackers Set seed length based on trackers and filesize Set additional seed time when a torrent's seed time expires based on a number of factors, like time spent seeding, remaining disk space and ratio. Move torrents to appropriate places post seeding based on labels and tracker Basically, while I could Python or Bash script things like moving torrents around and other simple actions, I need away to talk to the client to figure out things like the torrent seed time, tracker, labels, filesize, etc. Is there any client out there that would allow me to all or a subset these actions? I have access to Linux, Mac and Windows and am not tied to any particular torrent client. I am a programmer so I have no problems writing scripts, but examples of torrent scripting would also be helpful.

  Read the article

• How can I debug solutions in Visual Studio 2010 from a network share?

  - by alastairs

  I've recently got a new Mac laptop and am running VS2010 in a Parallels virtual machine. It's mostly working out well for me, but I'm having some problems with debugging specific project types, related to the fact that the projects are being accessed via a network share. Test projects don't run because the test runner can't load the tests' DLL. Web projects fail to run in the Visual Studio mini web server, throwing the following exception: 'An error occurred loading a configuration file: Failed to start monitoring changes to path\to\web.config'. I've spent the evening trawling the web with little luck on this. After reading these two posts, I tried out the usual CasPol changes, but then found this post from one of the early VS2010 betas indicating that CasPol is no longer needed/supported in .NET 4.0 and VS2010. The network share is accessible via both a mapped drive and the UNC path. The virtual machine runs its applications under the administrator account, which appears to have all the necessary permissions on the network share to create, read, write and delete files and folders. I say "appears to have" as I can't view the Security Properties of the appropriate folder via Explorer: the Security tab just isn't present. Has anyone managed to successfully load and debug web and test projects from a network share in VS2010?

  Read the article

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

• SMTP server closes connection unexpectedly

  - by janin

  I'm writing a python program to send emails, and when trying to send to yopmail, hotmail and some other hosts the connection gets closed by the server without a message. I tried connecting directly with netcat and the same thing happens. Here's what the exchange looks like : $ nc smtp.yopmail.com 25 220 mx.yopmail.com ESMTP *** ehlo mx.myhost.com 250 SIZE 2048000 mail FROM:<[email protected]> 250 OK rcpt TO:<[email protected]> The connection is just closed abruptly at this point. On other hosts, like my ISP's, everything goes fine. I've checked the blacklists but my IP is not listed. Any idea what's going on? Edit: My IP is not listed in any blacklist. I own myhost.com, but I don't have an SPF record. I'll add one and update this post when the record has propagated. Edit 2: with the SPF added the email is now accepted and Hotmail adds a Authentication-Results: hotmail.com; sender-id=pass header to the email. However it gets classified as spam, but I guess that's another matter. Thanks for your help.

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• Dell Studio 1555 not starting up

  - by Abhishek

  This is a 3-year-old laptop. I never had a big problem with it until now. I updated Kubuntu the night before yesterday. And Firefox got updated to version 18 and a few other related packages got updated. Then I shut down the laptop and restarted it, but it failed to start. I could hear the fan and the hard disk and the optical disk drive initialize. And the power button also lighted up. But there was no video - no POST or BIOS menu. I even opened the laptop up to the point when only the motherboard was the only thing attached to the base cover. I took it to the technician this evening. He checked it casually, and said that it might be a motherboard problem and will cost quite a bit to fix. Though he was not sure and said that he will give me a call after confirming the problem. Has anyone else had the same problem? What was it and what was the fix?

  Read the article

• I can play "test" sounds, but no other audio works

  - by Callum

  I'm running Windows XP, and last night my PC was infected by a frustrating virus (one of those viruses that won't let you open virus checkers, etc). I finally killed it 2 hours later, but it involved some heavy duty anti-dote. One side effect is my audio is now gone. Except it's not entirely gone, because when I open the Realtek HD Audio Manager in the task bar, I can play all the "test" sounds. The speakers, the sound card, etc, are therefore working fine. But things like YouTube or Windows Media Player, there's no sound. I'm guessing there's a setting that needs to be reconfigured somewhere.. but where? Maybe relevant: One thing I did do last night was "play" with the system registry. Any help would be greatly appreciated. Thanks. SOLVED! The two hour battle with my computer virus resulted in my computer permanently thinking it was in Safe Mode, regardless of how it booted up. I was able to "fix" this by following the post by hsandler in this thread: http://www.petri.co.il/forums/showthread.php?t=23032&page=2 I then rebooted.. and let me tell you, the Windows Startup music has never sounded so sweet. Thanks to all, especially James, whose advice gave me a major clue as to what the problem was.

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Looking for a recommendation on measuring a high availability app that is using a CDN.

  - by T Reddy

  I work for a Fortune 500 company that struggles with accurately measuring performance and availability for high availability applications (i.e., apps that are up 99.5% with 5 seconds page to page navigation). We factor in both scheduled and unscheduled downtime to determine this availability number. However, we recently added a CDN into the mix, which kind of complicates our metrics a bit. The CDN now handles about 75% of our traffic, while sending the remainder to our own servers. We attempt to measure what we call a "true user experience" (i.e., our testing scripts emulate a typical user clicking through the application.) These monitoring scripts sit outside of our network, which means we're hitting the CDN about 75% of the time. Management has decided that we take the worst case scenario to measure availability. So if our origin servers are having problems, but yet the CDN is serving content just fine, we still take a hit on availability. The same is true the other way around. My thought is that as long as the "user experience" is successful, we should not unnecessarily punish ourselves. After all, a CDN is there to improve performance and availability! I'm just wondering if anyone has any knowledge of how other Fortune 500 companies calculate their availability numbers? I look at apple.com, for instance, of a storefront that uses a CDN that never seems to be down (unless there is about to be a major product announcement.) It would be great to have some hard, factual data because I don't believe that we need to unnecessarily hurt ourselves on these metrics. We are making business decisions based on these numbers. I can say, however, given that these metrics are visible to management, issues get addressed and resolved pretty fast (read: we cut through the red-tape pretty quick.) Unfortunately, as a developer, I don't want management to think that the application is up or down because some external factor (i.e., CDN) is influencing the numbers. Thoughts? (I mistakenly posted this question on StackOverflow, sorry in advance for the cross-post)

  Read the article

• How to link to a subfolder of a share?

  - by Nicolas Raoul

  On my Windows XP server, a folder called Share2 is shared. It contains a subfolder called folder3. The guest account is protected by a password, which means network users have to type the guest password to access it. When a user types \\server\Share2 in his file explorer, he is prompted for a password. When a user types \\server\Share2\folder3 in his file explorer, an error appears. He is not even prompted for a password. This is problematic because I want to link to this particular folder. How can I link to folder3? Notes: - Both Desktop shortcuts and HTML links in IE7/8 give an error if I link to folder3, but work if I just link to Share2. - Using the file:// syntax instead of the \\ syntax leads to the same results. - Password setting per http://www.lancelhoff.com/how-to-password-protect-a-shared-folder - Not using "Simple File Sharing" - The error message is ???????????????????????? which means "could not find it. check the path and try again". No English Windows around to try, sorry! It is easy to reproduce the problem though, so can anyone post the English error message for the sake of searchability? Thanks!

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Oracle logical standby fails with ORA-01919

  - by DCookie

  I have an Oracle logical standby database being managed via data guard. Just this morning the redo apply process began failing with an ORA-01919 error, indicating one of our application roles did not exist. However, I can see the role on both primary and standby databases. We also have a physical standby that has long since applied the redo where this is happening on the logical, without issue. I have opened an SR with Oracle. I was wondering if anyone out there has seen this before. I guess I should mention: Oracle 10.2.0.4, Win2003 Server SP2. UPDATE: So far, Oracle Support has not provided an answer. I thought I'd post here what I have learned so far. It appears that a grant of DBA on the primary host to a role works fine for users granted the role. It does not work on the logical standby. IOW: create role TEST; grant dba to TEST; grant TEST to auser; connect auser set role TEST; grant <existing role> to <existing user>; This works on the primary instance but fails on the logical. A workaround appears to be to grant each role on the primary to the role TEST with admin option in the logical: grant <existing role> to TEST with admin option; <== do this on the logical standby Then the command works on the logical standby.

  Read the article

• How to pipe internet radio into a tuner?

  - by JW

  UPDATE: Thanks everyone for the ideas! This was an area I knew very little about but now I can talk with a little more expertise about it. Much appreciated! Visited my dad this weekend and he wants to pipe some internet radio he's found down to a tuner on quite a distance away in the house. He uses computers for only very basic things: e-mail, getting the Post crossword, checking Yahoo!, checking recipes, etc. There's currently one computer in the house (no router). My initial suggestion (without any research whatsoever) was to get a wireless router and a netbook for downstairs near the tuner, but he initially wasn't too keen about having another computer down there. Anyway, is there any computer hardware that could magically pipe the audio output from the computer down to one set of (RCA) audio inputs on the tuner? Wireless isn't necessary but it probably would be easier. Anyway, thanks for your suggestions! UPDATE Thanks everyone! Voted up all of your suggestions now that I have 15 rep. Much appreciated.

  Read the article

< Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >