Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 783/2372 | < Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >

• asynchrony is viral

  - by Daniel Moth

  It is becoming hard to write code today without introducing some form of asynchrony and, if you are using .NET (e.g. for Windows Phone 8 or Windows Store apps), that means sooner or later you have to await something and mark your method as async. My most recent examples included introducing speech recognition in my Translator By Moth phone app where I had to await mySpeechRecognizerUI.RecognizeWithUIAsync() and when moving that code base to a Windows Store project just to show a MessageBox I had to await myMessageDialog.ShowAsync(). Any time you need to invoke an asynchronous method in your code, you have a choice to make: kick off the operation but don’t wait for it to complete (otherwise known as fire-and-forget), synchronously wait for it to complete (which will entail blocking, which can be bad, especially on a UI thread), or asynchronously wait for it to complete before continuing on with the rest of the method’s work. In most cases, you want the latter, and the await keyword makes that trivial to implement.  When you use the magical await keyword in front of an API call, then you typically have to make additional changes to your code: This await usage is within a method of course, and now you have to annotate that method with async. Furthermore, you have to change the return type of the method you just annotated so it returns a Task (if it previously returned void), or Task<myOldReturnType> (if it previously returned myOldReturnType). Note that if it returns void, in some cases you could cheat and stop there. Furthermore, any method that called this method you just annotated with async will now also be invoking an asynchronous operation, so you have to make that change in the body of the caller method to introduce the await keyword before the call to the method. …you guessed it, you now have to change this caller method to be annotated with async and have its return types tweaked... …and it goes on virally… At some point you reach the root of your user code, e.g. a GUI event handler, and whoever calls that void method can already deal with the fact that you marked it as async and the viral introduction of the keywords stops there… This is all wonderful progress and a very powerful mechanism, and I just wish someone had written a refactoring tool to take care of this… anyone? I mentioned earlier that you have a choice when invoking an asynchronous operation. If the first time you encounter this you wish to localize the impact of all these changes and essentially try to turn the asynchronous behavior into synchronous by blocking - don't! For reasons why you don't want to do that, read Toub's excellent blog post (and check out the rest of his blog with gems on async programming starting with the Async FAQ). Just embrace the pattern knowing that when you use one instance of an await, you'll propagate the change all the way to the root user code method, e.g. typically an event handler. Related aside: I just finished re-writing my MessageBox wrapper class for Phone projects, including making it work in Windows Store projects, and it does expect you to use it with an await :-). I'll share that in an upcoming post for those of you that have the same need… Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Sorting Algorithms

  - by MarkPearl

  General Every time I go back to university I find myself wading through sorting algorithms and their implementation in C++. Up to now I haven’t really appreciated their true value. However as I discovered this last week with Dictionaries in C# – having a knowledge of some basic programming principles can greatly improve the performance of a system and make one think twice about how to tackle a problem. I’m going to cover briefly in this post the following: Selection Sort Insertion Sort Shellsort Quicksort Mergesort Heapsort (not complete) Selection Sort Array based selection sort is a simple approach to sorting an unsorted array. Simply put, it repeats two basic steps to achieve a sorted collection. It starts with a collection of data and repeatedly parses it, each time sorting out one element and reducing the size of the next iteration of parsed data by one. So the first iteration would go something like this… Go through the entire array of data and find the lowest value Place the value at the front of the array The second iteration would go something like this… Go through the array from position two (position one has already been sorted with the smallest value) and find the next lowest value in the array. Place the value at the second position in the array This process would be completed until the entire array had been sorted. A positive about selection sort is that it does not make many item movements. In fact, in a worst case scenario every items is only moved once. Selection sort is however a comparison intensive sort. If you had 10 items in a collection, just to parse the collection you would have 10+9+8+7+6+5+4+3+2=54 comparisons to sort regardless of how sorted the collection was to start with. If you think about it, if you applied selection sort to a collection already sorted, you would still perform relatively the same number of iterations as if it was not sorted at all. Many of the following algorithms try and reduce the number of comparisons if the list is already sorted – leaving one with a best case and worst case scenario for comparisons. Likewise different approaches have different levels of item movement. Depending on what is more expensive, one may give priority to one approach compared to another based on what is more expensive, a comparison or a item move. Insertion Sort Insertion sort tries to reduce the number of key comparisons it performs compared to selection sort by not “doing anything” if things are sorted. Assume you had an collection of numbers in the following order… 10 18 25 30 23 17 45 35 There are 8 elements in the list. If we were to start at the front of the list – 10 18 25 & 30 are already sorted. Element 5 (23) however is smaller than element 4 (30) and so needs to be repositioned. We do this by copying the value at element 5 to a temporary holder, and then begin shifting the elements before it up one. So… Element 5 would be copied to a temporary holder 10 18 25 30 23 17 45 35 – T 23 Element 4 would shift to Element 5 10 18 25 30 30 17 45 35 – T 23 Element 3 would shift to Element 4 10 18 25 25 30 17 45 35 – T 23 Element 2 (18) is smaller than the temporary holder so we put the temporary holder value into Element 3. 10 18 23 25 30 17 45 35 – T 23   We now have a sorted list up to element 6. And so we would repeat the same process by moving element 6 to a temporary value and then shifting everything up by one from element 2 to element 5. As you can see, one major setback for this technique is the shifting values up one – this is because up to now we have been considering the collection to be an array. If however the collection was a linked list, we would not need to shift values up, but merely remove the link from the unsorted value and “reinsert” it in a sorted position. Which would reduce the number of transactions performed on the collection. So.. Insertion sort seems to perform better than selection sort – however an implementation is slightly more complicated. This is typical with most sorting algorithms – generally, greater performance leads to greater complexity. Also, insertion sort performs better if a collection of data is already sorted. If for instance you were handed a sorted collection of size n, then only n number of comparisons would need to be performed to verify that it is sorted. It’s important to note that insertion sort (array based) performs a number item moves – every time an item is “out of place” several items before it get shifted up. Shellsort – Diminishing Increment Sort So up to now we have covered Selection Sort & Insertion Sort. Selection Sort makes many comparisons and insertion sort (with an array) has the potential of making many item movements. Shellsort is an approach that takes the normal insertion sort and tries to reduce the number of item movements. In Shellsort, elements in a collection are viewed as sub-collections of a particular size. Each sub-collection is sorted so that the elements that are far apart move closer to their final position. Suppose we had a collection of 15 elements… 10 20 15 45 36 48 7 60 18 50 2 19 43 30 55 First we may view the collection as 7 sub-collections and sort each sublist, lets say at intervals of 7 10 60 55 – 20 18 – 15 50 – 45 2 – 36 19 – 48 43 – 7 30 10 55 60 – 18 20 – 15 50 – 2 45 – 19 36 – 43 48 – 7 30 (Sorted) We then sort each sublist at a smaller inter – lets say 4 10 55 60 18 – 20 15 50 2 – 45 19 36 43 – 48 7 30 10 18 55 60 – 2 15 20 50 – 19 36 43 45 – 7 30 48 (Sorted) We then sort elements at a distance of 1 (i.e. we apply a normal insertion sort) 10 18 55 60 2 15 20 50 19 36 43 45 7 30 48 2 7 10 15 18 19 20 30 36 43 45 48 50 55 (Sorted) The important thing with shellsort is deciding on the increment sequence of each sub-collection. From what I can tell, there isn’t any definitive method and depending on the order of your elements, different increment sequences may perform better than others. There are however certain increment sequences that you may want to avoid. An even based increment sequence (e.g. 2 4 8 16 32 …) should typically be avoided because it does not allow for even elements to be compared with odd elements until the final sort phase – which in a way would negate many of the benefits of using sub-collections. The performance on the number of comparisons and item movements of Shellsort is hard to determine, however it is considered to be considerably better than the normal insertion sort. Quicksort Quicksort uses a divide and conquer approach to sort a collection of items. The collection is divided into two sub-collections – and the two sub-collections are sorted and combined into one list in such a way that the combined list is sorted. The algorithm is in general pseudo code below… Divide the collection into two sub-collections Quicksort the lower sub-collection Quicksort the upper sub-collection Combine the lower & upper sub-collection together As hinted at above, quicksort uses recursion in its implementation. The real trick with quicksort is to get the lower and upper sub-collections to be of equal size. The size of a sub-collection is determined by what value the pivot is. Once a pivot is determined, one would partition to sub-collections and then repeat the process on each sub collection until you reach the base case. With quicksort, the work is done when dividing the sub-collections into lower & upper collections. The actual combining of the lower & upper sub-collections at the end is relatively simple since every element in the lower sub-collection is smaller than the smallest element in the upper sub-collection. Mergesort With quicksort, the average-case complexity was O(nlog2n) however the worst case complexity was still O(N*N). Mergesort improves on quicksort by always having a complexity of O(nlog2n) regardless of the best or worst case. So how does it do this? Mergesort makes use of the divide and conquer approach to partition a collection into two sub-collections. It then sorts each sub-collection and combines the sorted sub-collections into one sorted collection. The general algorithm for mergesort is as follows… Divide the collection into two sub-collections Mergesort the first sub-collection Mergesort the second sub-collection Merge the first sub-collection and the second sub-collection As you can see.. it still pretty much looks like quicksort – so lets see where it differs… Firstly, mergesort differs from quicksort in how it partitions the sub-collections. Instead of having a pivot – merge sort partitions each sub-collection based on size so that the first and second sub-collection of relatively the same size. This dividing keeps getting repeated until the sub-collections are the size of a single element. If a sub-collection is one element in size – it is now sorted! So the trick is how do we put all these sub-collections together so that they maintain their sorted order. Sorted sub-collections are merged into a sorted collection by comparing the elements of the sub-collection and then adjusting the sorted collection. Lets have a look at a few examples… Assume 2 sub-collections with 1 element each 10 & 20 Compare the first element of the first sub-collection with the first element of the second sub-collection. Take the smallest of the two and place it as the first element in the sorted collection. In this scenario 10 is smaller than 20 so 10 is taken from sub-collection 1 leaving that sub-collection empty, which means by default the next smallest element is in sub-collection 2 (20). So the sorted collection would be 10 20 Lets assume 2 sub-collections with 2 elements each 10 20 & 15 19 So… again we would Compare 10 with 15 – 10 is the winner so we add it to our sorted collection (10) leaving us with 20 & 15 19 Compare 20 with 15 – 15 is the winner so we add it to our sorted collection (10 15) leaving us with 20 & 19 Compare 20 with 19 – 19 is the winner so we add it to our sorted collection (10 15 19) leaving us with 20 & _ 20 is by default the winner so our sorted collection is 10 15 19 20. Make sense? Heapsort (still needs to be completed) So by now I am tired of sorting algorithms and trying to remember why they were so important. I think every year I go through this stuff I wonder to myself why are we made to learn about selection sort and insertion sort if they are so bad – why didn’t we just skip to Mergesort & Quicksort. I guess the only explanation I have for this is that sometimes you learn things so that you can implement them in future – and other times you learn things so that you know it isn’t the best way of implementing things and that you don’t need to implement it in future. Anyhow… luckily this is going to be the last one of my sorts for today. The first step in heapsort is to convert a collection of data into a heap. After the data is converted into a heap, sorting begins… So what is the definition of a heap? If we have to convert a collection of data into a heap, how do we know when it is a heap and when it is not? The definition of a heap is as follows: A heap is a list in which each element contains a key, such that the key in the element at position k in the list is at least as large as the key in the element at position 2k +1 (if it exists) and 2k + 2 (if it exists). Does that make sense? At first glance I’m thinking what the heck??? But then after re-reading my notes I see that we are doing something different – up to now we have really looked at data as an array or sequential collection of data that we need to sort – a heap represents data in a slightly different way – although the data is stored in a sequential collection, for a sequential collection of data to be in a valid heap – it is “semi sorted”. Let me try and explain a bit further with an example… Example 1 of Potential Heap Data Assume we had a collection of numbers as follows 1[1] 2[2] 3[3] 4[4] 5[5] 6[6] For this to be a valid heap element with value of 1 at position [1] needs to be greater or equal to the element at position [3] (2k +1) and position [4] (2k +2). So in the above example, the collection of numbers is not in a valid heap. Example 2 of Potential Heap Data Lets look at another collection of numbers as follows 6[1] 5[2] 4[3] 3[4] 2[5] 1[6] Is this a valid heap? Well… element with the value 6 at position 1 must be greater or equal to the element at position [3] and position [4]. Is 6 > 4 and 6 > 3? Yes it is. Lets look at element 5 as position 2. It must be greater than the values at [4] & [5]. Is 5 > 3 and 5 > 2? Yes it is. If you continued to examine this second collection of data you would find that it is in a valid heap based on the definition of a heap.

  Read the article

• Managing User & Role Security with Oracle SQL Developer

  - by thatjeffsmith

  With the advent of SQL Developer v3.0, users have had access to some powerful database administration features. Version 3.1 introduced more powerful features such as an interface to Data Pump and RMAN. Today I want to talk about some very simple but frequently ran tasks that SQL Developer can assist with, like: identifying privs granted to users managing role privs assigning new roles and privs to users & roles Before getting started, you’ll need a connection to the database with the proper privileges. The common ROLE used to accomplish this is the ‘DBA‘ role. Curious as to what the DBA role is actually comprised of? Let’s find out! Open the DBA Console First make sure you’re connected to the database you want to manage security on with a privileged administrator account. Then open the View menu and select ‘DBA.’ Accessing the DBA panel ‘Create’ a Connection Click on the green ‘+’ button in the DBA panel. It will ask you to choose a previously defined SQL Developer connection. Defining a DBA connection in Oracle SQL Developer Once connected you will see a tree list of DBA features you can start interacting with. Expand the ‘Security’ Tree Node As you click on an object in the DBA panel, the ‘viewer’ will open on the right-hand-side, just like you are accustomed to seeing when clicking on a table or stored procedure. Accessing the DBA role If I’m a newly hired Oracle DBA, the first thing I might want to do is become very familiar with the DBA role. People will be asking you to grant them this role or a subset of its privileges. Once you see what the role can do, you will become VERY protective of it. My favorite 3-letter 4-letter word is ‘ANY’ and the DBA role is littered with privileges like this: ANY TABLE privs granted to DBA role So if this doesn’t freak you out, then maybe you should re-consider your career path. Or in other words, don’t be granting this role to ANYONE you don’t completely trust to take care of your database. If I’m just assigned a new database to manage, the first thing I might want to look at is just WHO has been assigned the DBA role. SQL Developer makes this easy to ascertain, just click on the ‘User Grantees’ panel. Who has the keys to your car? Making Changes to Roles and Users If you mouse-right-click on a user in the Tree, you can do individual tasks like grant a sys priv or expire an account. But, you can also use the ‘Edit User’ dialog to do a lot of work in one pass. As you click through options in these dialogs, it will build the ‘ALTER USER’ script in the SQL panel, which can then be executed or copied to the worksheet or to your .SQL file to be ran at your discretion. A Few Clicks vs a Lot of Typing These dialogs won’t make you a DBA, but if you’re pressed for time and you’re already in SQL Developer, they can sure help you make up for lost time in just a few clicks!

  Read the article

• Where’s my MD.050?

  - by Dave Burke

  A question that I’m sometimes asked is “where’s my MD.050 in OUM?” For those not familiar with an MD.050, it serves the purpose of being a Functional Design Document (FDD) in one of Oracle’s legacy Methods. Functional Design Documents have existed for many years with their primary purpose being to describe the functional aspects of one or more components of an IT system, typically, a Custom Extension of some sort. So why don’t we have a direct replacement for the MD.050/FDD in OUM? In simple terms, the disadvantage of the MD.050/FDD approach is that it tends to lead practitioners into “Design mode” too early in the process. Whereas OUM encourages more emphasis on gathering, and describing the functional requirements of a system ahead of the formal Analysis and Design process. So that just means more work up front for the Business Analyst or Functional Consultants right? Well no…..the design of a solution, particularly when it involves a complex custom extension, does not necessarily take longer just because you put more thought into the functional requirements. In fact, one could argue the complete opposite, in that by putting more emphasis on clearly understanding the nuances of functionality requirements early in the process, then the overall time and cost incurred during the Analysis to Design process should be less. In short, as your understanding of requirements matures over time, it is far easier (and more cost effective) to update a document or a diagram, than to change lines of code. So how does that translate into Tasks and Work Products in OUM? Let us assume you have reached a point on a project where a Custom Extension is needed. One of the first things you should consider doing is creating a Use Case, and remember, a Use Case could be as simple as a few lines of text reflecting a “User Story”, or it could be what Cockburn1 describes a “fully dressed Use Case”. It is worth mentioned at this point the highly scalable nature of OUM in the sense that “documents” should not be produced just because that is the way we have always done things. Some projects may well be predicated upon a base of electronic documents, whilst other projects may take a much more Agile approach to describing functional requirements; through “User Stories” perhaps. In any event, it is quite common for a Custom Extension to involve the creation of several “components”, i.e. some new screens, an interface, a report etc. Therefore several Use Cases might be required, which in turn can then be assembled into a Use Case Package. Once you have the Use Cases attributed to an appropriate (fit-for-purpose) level of detail, and assembled into a Package, you can now create an Analysis Model for the Package. An Analysis Model is conceptual in nature, and depending on the solution being developing, would involve the creation of one or more diagrams (i.e. Sequence Diagrams, Collaboration Diagrams etc.) which collectively describe the Data, Behavior and Use Interface requirements of the solution. If required, the various elements of the Analysis Model may be indexed via an Analysis Specification. For Custom Extension projects that follow a pure Object Orientated approach, then the Analysis Model will naturally support the development of the Design Model without any further artifacts. However, for projects that are transitioning to this approach, then the various elements of the Analysis Model may be represented within the Analysis Specification. If we now return to the original question of “Where’s my MD.050”. The full answer would be: Capture the functional requirements within a Use Case Group related Use Cases into a Package Create an Analysis Model for each Package Consider creating an Analysis Specification (AN.100) as a index to each Analysis Model artifact An alternative answer for a relatively simple Custom Extension would be: Capture the functional requirements within a Use Case Optionally, group related Use Cases into a Package Create an Analysis Specification (AN.100) for each package 1 Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1

  Read the article

• Book Reviews: Art of Community and Eyetracking Web Usability

  - by ultan o'broin

  Holidays time offers a chance to catch up on some user experience and user assistance related material. So, two short book reviews (which I considered using my new Tumblr blog for. More about that another time) coming up. The Art of Community by Jono Bacon Excellent starting point for anyone wanting to get going in the community software (FLOSS, for example) space or understand how to set up, manage, and leverage the collective intelligence of communities for whatever ends. The book is a little too long in my opinion, and of course, usage of what Jono is recommending needs to be nuanced and adapted for enterprise applications space (hardly surprising there is a lot about Ubuntu, Lug Radio, and so on given Jono's interests). Shame there wasn't more information on international, non-English community considerations too. Still, some great ideas and insight into setting up and managing communities that I will leverage (watch out for the results on this blog, later in 2011). One section, on collaborative writing really jumped out. It reinforced the whole idea that to successful community initiatives are based on instigators knowing what makes the community tick in the first place. How about this for insight into user profiles for people who write community user assistance (OK then, "doc") and what tools they might use (in this case, we're talking about Jokosher): "Most people who write documentation for open source software projects would fall into the category of power user. They are technology enthusiasts who are not interested in the super-technical avenues of programming, but want to help out. Many of these people have good writing skills and a good knowledge of using the software, so the documentation fit is natural. With Jokosher we wanted to acknowledge this profile of user. As such, instead of focussing on complex text processing tools, we encouraged our documentation contributors to use a wiki." The book is available for free here, and well as being available from usual sources. Eyetracking Web Usability by Jakob Nielsen and Kara Prentice Another fine book by established experts. I have some field experience of eyetracking studies myself --in the user assistance for enterprise applications space--though Jakob and Kara concentrate on websites for their research here. I would caution how much about websites transfers easily to the applications space, especially enterprise applications, as claimed in the book too. However, Jakob and Kara do make the case very well that understanding design goals (for example, productivity improvement in the case of applications) and the context of the software use is critical. Executing a study using eyetracking technology requires that you know what you want to test, can set up realistic tasks for testing by representative testers, and then analyze the results. Be precise, as lots of data will be generated (I think the authors underplay the effort in analyzing data too). What I found disappointing was the lack of emphasis on eyetracking as only part of the usability solution. It's really for fine-tuning designs in my opinion, and should be used after other design reviews. I also wasn't that crazy about the level of disengagement between the qualitative and quantitative side of this kind of testing that the book indicated. I think it is useful to have testers verbalize their thoughts and for test engineers to prompt, intervene, or guide as necessary. More on cultural or international aspects to usability testing might have been included too (websites are available to everyone). To conclude, I enjoyed the book, took on board some key takeaways about methodologies and found the recommendations sensible and easy to follow (for example about Forms layouts). Applying enterprise applications requirements such as those relating to user profiles, design goals, and overall context of use in conjunction with what's in this book would be the way to go here. It also made me think of how interesting it would be to compare eyetracking findings between website and enterprise applications usage.

  Read the article

• OBIEE 11.1.1 - User Interface (UI) Performance Is Slow With Internet Explorer 8

  - by Ahmed A

  The OBIEE 11g UI is performance is slow in IE 8 and faster in Firefox.  For VPN or WAN users, it takes long time to display links on Dashboards via IE 8. Cause is IE 8 generates many HTTP 304 return calls and this caused the 11g UI slower when compared to the Mozilla FireFox browser. To resolve this issue, you can implement HTTP compression and caching. This is a best practice.Why use Web Server Compression / Caching for OBIEE? Bandwidth Savings: Enabling HTTP compression can have a dramatic improvement on the latency of responses. By compressing static files and dynamic application responses, it will significantly reduce the remote (high latency) user response time. Improves request/response latency: Caching makes it possible to suppress the payload of the HTTP reply using the 304 status code.  Minimizing round trips over the Web to re-validate cached items can make a huge difference in browser page load times. This screen shot depicts the flow and where the compression and decompression occurs: Solution: a. How to Enable HTTP Caching / Compression in Oracle HTTP Server (OHS) 11.1.1.x 1. To implement HTTP compression / caching, install and configure Oracle HTTP Server (OHS) 11.1.1.x for the bi_serverN Managed Servers (refer to "OBIEE Enterprise Deployment Guide for Oracle Business Intelligence" document for details). 2. On the OHS machine, open the file HTTP Server configuration file (httpd.conf) for editing. This file is located in the OHS installation directory.For example: ORACLE_HOME/Oracle_WT1/instances/instance1/config/OHS/ohs13. In httpd.conf file, verify that the following directives are included and not commented out: LoadModule expires_module "${ORACLE_HOME}/ohs/modules/mod_expires.soLoadModule deflate_module "${ORACLE_HOME}/ohs/modules/mod_deflate.so 4. Add the following lines in httpd.conf file below the directive LoadModule section and restart the OHS: Note: For the Windows platform, you will need to enclose any paths in double quotes ("), for example:Alias "/analytics ORACLE_HOME/bifoundation/web/app"<Directory "ORACLE_HOME/bifoundation/web/app"> Alias /analytics ORACLE_HOME/bifoundation/web/app#Pls replace the ORACLE_HOME with your actual BI ORACLE_HOME path<Directory ORACLE_HOME/bifoundation/web/app>#We don't generate proper cross server ETags so disable themFileETag noneSetOutputFilter DEFLATE# Don't compress imagesSetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary<FilesMatch "\.(gif|jpeg|png|js|x-javascript|javascript|css)$">#Enable future expiry of static filesExpiresActive onExpiresDefault "access plus 1 week"     #1 week, this will stops the HTTP304 calls i.e. generated by IE 8Header set Cache-Control "max-age=604800"</FilesMatch>DirectoryIndex default.jsp</Directory>#Restrict access to WEB-INF<Location /analytics/WEB-INF>Order Allow,DenyDeny from all</Location> Note: Make sure you replace above placeholder "ORACLE_HOME" to your correct path for BI ORACLE_HOME.For example: my BI Oracle Home path is /Oracle/BIEE11g/Oracle_BI1/bifoundation/web/app Important Notes: Above caching rules restricted to static files found inside the /analytics directory(/web/app). This approach is safer instead of setting static file caching globally. In some customer environments you may not get 100% performance gains in IE 8.0 browser. So in that case you need to extend caching rules to other directories with static files content. If OHS is installed on separate dedicated machine, make sure static files in your BI ORACLE_HOME (../Oracle_BI1/bifoundation/web/app) is accessible to the OHS instance. The following screen shot summarizes the before and after results and improvements after enabling compression and caching:

  Read the article

• Pie Charts Just Don't Work When Comparing Data - Number 10 of Top 10 Reasons to Never Ever Use a Pie

  - by Tony Wolfram

  When comparing data, which is what a pie chart is for, people have a hard time judging the angles and areas of the multiple pie slices in order to calculate how much bigger one slice is than the others. Pie Charts Don't Work A slice of pie is good for serving up a portion of desert. It's not good for making a judgement about how big the slice is, what percentage of 100 it is, or how it compares to other slices. People have trouble comparing angles and areas to each other. Controlled studies show that people will overestimate the percentage that a pie slice area represents. This is because we have trouble calculating the area based on the space between the two angles that define the slice. This picture shows how a pie chart is useless in determing the largest value when you have to compare pie slices.   You can't compare angles and slice areas to each other. Human perception and cognition is poor when viewing angles and areas and trying to make a mental comparison. Pie charts overload the working memory, forcing the person to make complicated calculations, and at the same time make a decision based on those comparisons. What's the point of showing a pie chart when you want to compare data, except to say, "well, the slices are almost the same, but I'm not really sure which one is bigger, or by how much, or what order they are from largest to smallest. But the colors sure are pretty. Plus, I like round things. Oh,was I suppose to make some important business decision? Sorry." Bad Choices and Bad Decisions Interaction Designers, Graphic Artists, Report Builders, Software Developers, and Executives have all made the decision to use pie charts in their reports, software applications, and dashboards. It was a bad decision. It was a poor choice. There are always better options and choices, yet the designer still made the decision to use a pie chart. I'll expore why people make such poor choices in my upcoming blog entires. (Hint: It has more to do with emotions than with analytical thinking.) I've outlined my opinions and arguments about the evils of using pie charts in "Countdown of Top 10 Reasons to Never Ever Use a Pie Chart." Each of my next 10 blog entries will support these arguments with illustrations, examples, and references to studies. But my goal is not to continuously and endlessly rage against the evils of using pie charts. This blog is not about pie charts. This blog is about understanding why designers choose to use a pie chart. Why, when give better alternatives, and acknowledging the shortcomings of pie charts, do designers over and over again still freely choose to place a pie chart in a report? As an extra treat and parting shot, check out the nice pie chart that Wikipedia uses to illustrate the United States population by state.   Remember, somebody chose to use this pie chart, with all its glorious colors, and post it on Wikipedia for all the world to see. My next blog will give you a better alternative for displaying comparable data - the sorted bar chart.

  Read the article

• Auto-cancel reason not found (6, 13906)

  - by Rajesh Sharma

  There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it.    In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'.   You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel.   Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status).   CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action.   If in batch, system automatically cancels these kinds of bill segment(s).   Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation).   So what exactly happens during batch billing?   Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments.     SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date   If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically.   During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found.   Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201.   Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

  Read the article

• SQL SERVER – DQS Error – Cannot connect to server – A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions” – SetDataQualitySessionPhaseTwo

  - by pinaldave

  Earlier I wrote a blog post about how to install DQS in SQL Server 2012. Today I decided to write a second part of this series where I explain how to use DQS, however, as soon as I started the DQS client, I encountered an error that will not let me pass through and connect with DQS client. It was a bit strange to me as everything was functioning very well when I left it last time.  The error was very big but here are the first few words of it. Cannot connect to server. A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions”: System.Data.SqlClient.SqlException (0×80131904): A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessionPhaseTwo”: The error continues – here is the quick screenshot of the error. As my initial attempts could not fix the error I decided to search online and I finally received a wonderful solution from Microsoft Site. The error has happened due to latest update I had installed on .NET Framework 4. There was a  mismatch between the Module Version IDs (MVIDs) of the SQL Common Language Runtime (SQLCLR) assemblies in the SQL Server 2012 database and the Global Assembly Cache (GAC). This mismatch was to be resolved for the DQS to work properly. The workaround is specified here in detail. Scroll to subtopic 4.23 Some .NET Framework 4 Updates Might Cause DQS to Fail. The script was very much straight forward. Here are the few things to not to miss while applying workaround. Make sure DQS client is properly closed The NETAssemblies is based on your OS. NETAssemblies for 64 bit machine – which is my machine is “c:\windows\Microsoft.NET\Framework64\v4.0.30319″. If you have Winodws installed on any other drive other than c:\windows do not forget to change that in the above path. Additionally if you have 32 bit version installed on c:\windows you should use path as ”c:\windows\Microsoft.NET\Framework\v4.0.30319″ Make sure that you execute the script specified in 4.23 sections in this article in the database DQS_MAIN. Do not run this in the master database as this will not fix your error. Do not forget to restart your SQL Services once above script has been executed. Once you open the client it will work this time. Here is the script which I have bit modified from original script. I strongly suggest that you use original script mentioned 4.23 sections. However, this one is customized my own machine. /* Original source: http://bit.ly/PXX4NE (Technet) Modifications: -- Added Database context -- Added environment variable @NETAssemblies -- Main script modified to use @NETAssemblies */ USE DQS_MAIN GO BEGIN -- Set your environment variable -- assumption - Windows is installed in c:\windows folder DECLARE @NETAssemblies NVARCHAR(200) -- For 64 bit uncomment following line SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework64\v4.0.30319\' -- For 32 bit uncomment following line -- SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework\v4.0.30319\' DECLARE @AssemblyName NVARCHAR(200), @RefreshCmd NVARCHAR(200), @ErrMsg NVARCHAR(200) DECLARE ASSEMBLY_CURSOR CURSOR FOR SELECT name AS NAME FROM sys.assemblies WHERE name NOT LIKE '%ssdqs%' AND name NOT LIKE '%microsoft.sqlserver.types%' AND name NOT LIKE '%practices%' AND name NOT LIKE '%office%' AND name NOT LIKE '%stdole%' AND name NOT LIKE '%Microsoft.Vbe.Interop%' OPEN ASSEMBLY_CURSOR FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName WHILE @@FETCH_STATUS = 0 BEGIN BEGIN TRY SET @RefreshCmd = 'ALTER ASSEMBLY [' + @AssemblyName + '] FROM ''' + @NETAssemblies + @AssemblyName + '.dll' + ''' WITH PERMISSION_SET = UNSAFE' EXEC sp_executesql @RefreshCmd PRINT 'Successfully upgraded assembly ''' + @AssemblyName + '''' END TRY BEGIN CATCH IF ERROR_NUMBER() != 6285 BEGIN SET @ErrMsg = ERROR_MESSAGE() PRINT 'Failed refreshing assembly ' + @AssemblyName + '. Error message: ' + @ErrMsg END END CATCH FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName END CLOSE ASSEMBLY_CURSOR DEALLOCATE ASSEMBLY_CURSOR END GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Stored Procedures with SSRS? Hmm… not so much

  - by Rob Farley

  Little Bobby Tables’ mother says you should always sanitise your data input. Except that I think she’s wrong. The SQL Injection aspect is for another post, where I’ll show you why I think SQL Injection is the same kind of attack as many other attacks, such as the old buffer overflow, but here I want to have a bit of a whinge about the way that some people sanitise data input, and even have a whinge about people who insist on using stored procedures for SSRS reports. Let me say that again, in case you missed it the first time: I want to have a whinge about people who insist on using stored procedures for SSRS reports. Let’s look at the data input sanitisation aspect – except that I’m going to call it ‘parameter validation’. I’m talking about code that looks like this: create procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     /* First check that @eomdate is a valid date */     if isdate(@eomdate) != 1     begin         select 'Please enter a valid date' as ErrorMessage;         return;     end     /* Then check that time has passed since @eomdate */     if datediff(day,@eomdate,sysdatetime()) < 5     begin         select 'Sorry - EOM is not complete yet' as ErrorMessage;         return;     end         /* If those checks have succeeded, return the data */     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where OrderDate >= dateadd(month,-1,@eomdate)         and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Notice that the code checks that a date has been entered. Seriously??!! This must only be to check for NULL values being passed in, because anything else would have to be a valid datetime to avoid an error. The other check is maybe fair enough, but I still don’t like it. The two problems I have with this stored procedure are the result sets and the small fact that the stored procedure even exists in the first place. But let’s consider the first one of these problems for starters. I’ll get to the second one in a moment. If you read Jes Borland (@grrl_geek)’s recent post about returning multiple result sets in Reporting Services, you’ll be aware that Reporting Services doesn’t support multiple results sets from a single query. And when it says ‘single query’, it includes ‘stored procedure call’. It’ll only handle the first result set that comes back. But that’s okay – we have RETURN statements, so our stored procedure will only ever return a single result set.  Sometimes that result set might contain a single field called ErrorMessage, but it’s still only one result set. Except that it’s not okay, because Reporting Services needs to know what fields to expect. Your report needs to hook into your fields, so SSRS needs to have a way to get that information. For stored procs, it uses an option called FMTONLY. When Reporting Services tries to figure out what fields are going to be returned by a query (or stored procedure call), it doesn’t want to have to run the whole thing. That could take ages. (Maybe it’s seen some of the stored procedures I’ve had to deal with over the years!) So it turns on FMTONLY before it makes the call (and turns it off again afterwards). FMTONLY is designed to be able to figure out the shape of the output, without actually running the contents. It’s very useful, you might think. set fmtonly on exec dbo.GetMonthSummaryPerSalesPerson '20030401'; set fmtonly off Without the FMTONLY lines, this stored procedure returns a result set that has three columns and fourteen rows. But with FMTONLY turned on, those rows don’t come back. But what I do get back hurts Reporting Services. It doesn’t run the stored procedure at all. It just looks for anything that could be returned and pushes out a result set in that shape. Despite the fact that I’ve made sure that the logic will only ever return a single result set, the FMTONLY option kills me by returning three of them. It would have been much better to push these checks down into the query itself. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     order by SalesPersonID; end Now if we run it with FMTONLY turned on, we get the single result set back. But let’s consider the execution plan when we pass in an invalid date. First let’s look at one that returns data. I’ve got a semi-useful index in place on OrderDate, which includes the SalesPersonID and TotalDue fields. It does the job, despite a hefty Sort operation. …compared to one that uses a future date: You might notice that the estimated costs are similar – the Index Seek is still 28%, the Sort is still 71%. But the size of that arrow coming out of the Index Seek is a whole bunch smaller. The coolest thing here is what’s going on with that Index Seek. Let’s look at some of the properties of it. Glance down it with me… Estimated CPU cost of 0.0005728, 387 estimated rows, estimated subtree cost of 0.0044385, ForceSeek false, Number of Executions 0. That’s right – it doesn’t run. So much for reading plans right-to-left... The key is the Filter on the left of it. It has a Startup Expression Predicate in it, which means that it doesn’t call anything further down the plan (to the right) if the predicate evaluates to false. Using this method, we can make sure that our stored procedure contains a single query, and therefore avoid any problems with multiple result sets. If we wanted, we could always use UNION ALL to make sure that we can return an appropriate error message. alter procedure dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) as begin     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, /*Placeholder: */ '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     /* Now include the error messages */     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5     order by SalesPersonID; end But still I don’t like it, because it’s now a stored procedure with a single query. And I don’t like stored procedures that should be functions. That’s right – I think this should be a function, and SSRS should call the function. And I apologise to those of you who are now planning a bonfire for me. Guy Fawkes’ night has already passed this year, so I think you miss out. (And I’m not going to remind you about when the PASS Summit is in 2012.) create function dbo.GetMonthSummaryPerSalesPerson(@eomdate datetime) returns table as return (     select SalesPersonID, count(*) as NumSales, sum(TotalDue) as TotalSales, '' as ErrorMessage     from Sales.SalesOrderHeader     where     /* Make sure that @eomdate is valid */         isdate(@eomdate) = 1     /* And that it's sufficiently past */     and datediff(day,@eomdate,sysdatetime()) >= 5     /* And now use it in the filter as appropriate */     and OrderDate >= dateadd(month,-1,@eomdate)     and OrderDate < @eomdate     group by SalesPersonID     union all     select 0, 0, 0, 'Please enter a valid date' as ErrorMessage     where isdate(@eomdate) != 1     union all     select 0, 0, 0, 'Sorry - EOM is not complete yet' as ErrorMessage     where datediff(day,@eomdate,sysdatetime()) < 5 ); We’ve had to lose the ORDER BY – but that’s fine, as that’s a client thing anyway. We can have our reports leverage this stored query still, but we’re recognising that it’s a query, not a procedure. A procedure is designed to DO stuff, not just return data. We even get entries in sys.columns that confirm what the shape of the result set actually is, which makes sense, because a table-valued function is the right mechanism to return data. And we get so much more flexibility with this. If you haven’t seen the simplification stuff that I’ve preached on before, jump over to http://bit.ly/SimpleRob and watch the video of when I broke a microphone and nearly fell off the stage in Wales. You’ll see the impact of being able to have a simplifiable query. You can also read the procedural functions post I wrote recently, if you didn’t follow the link from a few paragraphs ago. So if we want the list of SalesPeople that made any kind of sales in a given month, we can do something like: select SalesPersonID from dbo.GetMonthSummaryPerSalesPerson(@eomonth) order by SalesPersonID; This doesn’t need to look up the TotalDue field, which makes a simpler plan. select * from dbo.GetMonthSummaryPerSalesPerson(@eomonth) where SalesPersonID is not null order by SalesPersonID; This one can avoid having to do the work on the rows that don’t have a SalesPersonID value, pushing the predicate into the Index Seek rather than filtering the results that come back to the report. If we had joins involved, we might see some of those being simplified out. We also get the ability to include query hints in individual reports. We shift from having a single-use stored procedure to having a reusable stored query – and isn’t that one of the main points of modularisation? Stored procedures in Reporting Services are just a bit limited for my liking. They’re useful in plenty of ways, but if you insist on using stored procedures all the time rather that queries that use functions – that’s rubbish. @rob_farley

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 23 (sys.dm_db_index_usage_stats)

  - by Tamarick Hill

  The sys.dm_db_index_usage_stats Dynamic Management View is used to return usage information about the various indexes on your SQL Server instance. Let’s have a look at this DMV against our AdventureWorks2012 database so we can examine the information returned. SELECT * FROM sys.dm_db_index_usage_stats WHERE database_id = db_id('AdventureWorks2012') The first three columns in the result set represent the database_id, object_id, and index_id of a given row. You can join these columns back to other system tables to extract the actual database, object, and index names. The next four columns are probably the most beneficial columns within this DMV. First, the user_seeks column represents the number of times that a user query caused a seek operation against a particular index. The user_scans column represents how many times a user query caused a scan operation on a particular index. The user_lookups column represents how many times an index was used to perform a lookup operation. The user_updates column refers to how many times an index had to be updated due to a write operation that effected a particular index. The last_user_seek, last_user_scan, last_user_lookup, and last_user_update columns provide you with DATETIME information about when the last user scan, seek, lookup, or update operation was performed. The remaining columns in the result set are the same as the ones we previously discussed, except instead of the various operations being generated from user requests, they are generated from system background requests. This is an extremely useful DMV and one of my favorites when it comes to Index Maintenance. As we all know, indexes are extremely beneficial with improving the performance of your read operations. But indexes do have a downside as well. Indexes slow down the performance of your write operations, and they also require additional resources for storage. For this reason, in my opinion, it is important to regularly analyze the indexes on your system to make sure the indexes you have are being used efficiently. My AdventureWorks2012 database is only used for demonstrating or testing things, so I dont have a lot of meaningful information here, but for a Production system, if you see an index that is never getting any seeks, scans, or lookups, but is constantly getting a ton of updates, it more than likely would be a good candidate for you to consider removing. You would not be getting much benefit from the index, but yet it is incurring a cost on your system due to it constantly having to be updated for your write operations, not to mention the additional storage it is consuming. You should regularly analyze your indexes to ensure you keep your database systems as efficient and lean as possible. One thing to note is that these DMV statistics are reset every time SQL Server is restarted. Therefore it would not be a wise idea to make decisions about removing indexes after a Server Reboot or a cluster roll. If you restart your SQL Server instances frequently, for example if you schedule weekly/monthly cluster rolls, then you may not capture indexes that are being used for weekly/monthly reports that run for business users. And if you remove them, you may have some upset people at your desk on Monday morning. If you would like to begin analyzing your indexes to possibly remove the ones that your system is not using, I would recommend building a process to load this DMV information into a table on scheduled basis, depending on how frequently you perform an operation that would reset these statistics, then you can analyze the data over a period of time to get a more accurate view of what indexes are really being used and which ones or not. For more information about this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms188755.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• Silverlight Cream for December 12, 2010 -- #1008

  - by Dave Campbell

  In this Issue: Michael Washington, Samuel Jack, Alfred Astort(-2-), Nokola(-2-), Avi Pilosof, Chris Klug, Pete Brown, Laurent Bugnion(-2-), and Jaime Rodriguez(-2-, -3-). Above the Fold: Silverlight: "Sharing resources and styles between projects in Silverlight" Chris Klug WP7: "Windows Phone Application Performance at Silverlight Firestarter" Jaime Rodriguez Training: "Silverlight View Model (MVVM) - A Play In One Act" Michael Washington Shoutouts: Koen Zwikstra announced the availability of the first Silverlight Spy 4 Preview 1 Gavin Wignall announced the Launch of Festive game built with Silverlight 4, hosted on Azure ... free to play. From SilverlightCream.com: Silverlight View Model (MVVM) - A Play In One Act Michael Washington has an interesting take on writing a blog post with this 'play' version of Silverlight View Models and Expression Blend with a heaping dose of Behaviors added in for flavoring. Build a Windows Phone Game in 3 days – Day 1 Samuel Jack is attempting to build a WP7 game in 3 days including downloading the tools and an XNA book... interesting to see where he's headed wth this venture. 4 of 10 - Make sure your finger can hit the target and text is legible Continuing with a series of tips from the folks reviewing apps for the marketplace via Alfred Astort is this number 4 -- touch target size and legible text. 5 of 10 - Give feedback on touch and progress within your UI Alfred Astort's number 5 is also up, and continues the touch discussion with this tip about giving the user feedback on their touch. Fantasia Painter Released for Windows Phone 7 + Tips Nokola took the release of his Fantasia Painter on WP& as an opportunity not only to blog about the fact that we can go buy it, but has a blog full of hints and tips that he gathered while working on it. Games for Windows Phone 7 Resources: Reducing Load Times, RPG Kit; Other Nokola also blogged about the release of the new games education pack, and gives up the cursor he uses in his videos after being asked... The simplest way to do design-time ViewModels with MVVM and Blend. Avi Pilosof attacks the design-time ViewModel issue in Blend with a 'no code' solution. Sharing resources and styles between projects in Silverlight Chris Klug is talking about sharing resources and styles across a large Silverlight project... near and dear to my heart at this moment. Dynamically Generating Controls in WPF and Silverlight Pete Brown has a post up that's generated some interest... creating controls at runtime... and he's demonstrating several different ways for both Silverlight and WPF #twitter for Windows Phone 7 protips (#wp7) Laurent Bugnion was posting these great tips for Twitter for WP7 and rolled all 16 of them up into a blog post... check them and the app out... Increasing touch surface (#wp7dev) Laurent Bugnion's most current post should be of great interest to WP7 devs... providing more touch surface for your user's fat fingers, err, I mean their fat fingerings :) ... great information and samples ... and interesting it is a fail point as listed by Alfred Astort above. Windows Phone Application Performance at Silverlight Firestarter This material from Jaime Rodriguez actually hit prior to his Firestarter presentation, but should be required reading for anyone doing a WP7 app... great Performance tips from the trenches... slide deck, cheat-sheet, and code. UpdateSourceTrigger on Windows Phone data bindings Another post from Jaime Rodriguez actually went through a couple revisions already.. how about a WP7 TextBox that fires notifications to the ViewModel when the text changes? ... would you like a behavior with that? Details on the Push Notification app limits Jaime Rodriguez has yet another required reading post up on Push Notification limits ... what it really entails and how you can be a good WP7 citizen by the way you program your app. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Why Cornell University Chose Oracle Data Masking

  - by Troy Kitch

  One of the eight Ivy League schools, Cornell University found itself in the unfortunate position of having to inform over 45,000 University community members that their personal information had been breached when a laptop was stolen. To ensure this wouldn’t happen again, Cornell took steps to ensure that data used for non-production purposes is de-identified with Oracle Data Masking. A recent podcast highlights why organizations like Cornell are choosing Oracle Data Masking to irreversibly de-identify production data for use in non-production environments. Organizations often copy production data, that contains sensitive information, into non-production environments so they can test applications and systems using “real world” information. Data in non-production has increasingly become a target of cyber criminals and can be lost or stolen due to weak security controls and unmonitored access. Similar to production environments, data breaches in non-production environments can cost millions of dollars to remediate and cause irreparable harm to reputation and brand. Cornell’s applications and databases help carry out the administrative and academic mission of the university. They are running Oracle PeopleSoft Campus Solutions that include highly sensitive faculty, student, alumni, and prospective student data. This data is supported and accessed by a diverse set of developers and functional staff distributed across the university. Several years ago, Cornell experienced a data breach when an employee’s laptop was stolen.  Centrally stored backup information indicated there was sensitive data on the laptop. With no way of knowing what the criminal intended, the university had to spend significant resources reviewing data, setting up service centers to handle constituent concerns, and provide free credit checks and identity theft protection services—all of which cost money and took time away from other projects. To avoid this issue in the future Cornell came up with several options; one of which was to sanitize the testing and training environments. “The project management team was brought in and they developed a project plan and implementation schedule; part of which was to evaluate competing products in the market-space and figure out which one would work best for us.  In the end we chose Oracle’s solution based on its architecture and its functionality.” – Tony Damiani, Database Administration and Business Intelligence, Cornell University The key goals of the project were to mask the elements that were identifiable as sensitive in a consistent and efficient manner, but still support all the previous activities in the non-production environments. Tony concludes,  “What we saw was a very minimal impact on performance. The masking process added an additional three hours to our refresh window, but it was well worth that time to secure the environment and remove the sensitive data. I think some other key points you can keep in mind here is that there was zero impact on the production environment. Oracle Data Masking works in non-production environments only. Additionally, the risk of exposure has been significantly reduced and the impact to business was minimal.” With Oracle Data Masking organizations like Cornell can: Make application data securely available in non-production environments Prevent application developers and testers from seeing production data Use an extensible template library and policies for data masking automation Gain the benefits of referential integrity so that applications continue to work Listen to the podcast to hear the complete interview.  Learn more about Oracle Data Masking by registering to watch this SANS Institute Webcast and view this short demo.

  Read the article

• Building vs. Buying a Master Data Management Solution

  - by david.butler(at)oracle.com

  Many organizations prefer to build their own MDM solutions. The argument is that they know their data quality issues and their data better than anyone. Plus a focused solution will cost less in the long run then a vendor supplied general purpose product. This is not unreasonable if you think of MDM as a point solution for a particular data quality problem. But this approach carries significant risk. We now know that organizations achieve significant competitive advantages when they deploy MDM as a strategic enterprise wide solution: with the most common best practice being to deploy a tactical MDM solution and grow it into a full information architecture. A build your own approach most certainly will not scale to a larger architecture unless it is done correctly with the larger solution in mind. It is possible to build a home grown point MDM solution in such a way that it will dovetail into broader MDM architectures. A very good place to start is to use the same basic technologies that Oracle uses to build its own MDM solutions. Start with the Oracle 11g database to create a flexible, extensible and open data model to hold the master data and all needed attributes. The Oracle database is the most flexible, highly available and scalable database system on the market. With its Real Application Clusters (RAC) it can even support the mixed OLTP and BI workloads that represent typical MDM data access profiles. Use Oracle Data Integration (ODI) for batch data movement between applications, MDM data stores, and the BI layer. Use Oracle Golden Gate for more real-time data movement. Use Oracle's SOA Suite for application integration with its: BPEL Process Manager to orchestrate MDM connections to business processes; Identity Management for managing users; WS Manager for managing web services; Business Intelligence Enterprise Edition for analytics; and JDeveloper for creating or extending the MDM management application. Oracle utilizes these technologies to build its MDM Hubs.  Customers who build their own MDM solution using these components will easily migrate to Oracle provided MDM solutions when the home grown solution runs out of gas. But, even with a full stack of open flexible MDM technologies, creating a robust MDM application can be a daunting task. For example, a basic MDM solution will need: a set of data access methods that support master data as a service as well as direct real time access as well as batch loads and extracts; a data migration service for initial loads and periodic updates; a metadata management capability for items such as business entity matrixed relationships and hierarchies; a source system management capability to fully cross-reference business objects and to satisfy seemingly conflicting data ownership requirements; a data quality function that can find and eliminate duplicate data while insuring correct data attribute survivorship; a set of data quality functions that can manage structured and unstructured data; a data quality interface to assist with preventing new errors from entering the system even when data entry is outside the MDM application itself; a continuing data cleansing function to keep the data up to date; an internal triggering mechanism to create and deploy change information to all connected systems; a comprehensive role based data security system to control and monitor data access, update rights, and maintain change history; a flexible business rules engine for managing master data processes such as privacy and data movement; a user interface to support casual users and data stewards; a business intelligence structure to support profiling, compliance, and business performance indicators; and an analytical foundation for directly analyzing master data. Oracle's pre-built MDM Hub solutions are full-featured 3-tier Internet applications designed to participate in the full Oracle technology stack or to run independently in other open IT SOA environments. Building MDM solutions from scratch can take years. Oracle's pre-built MDM solutions can bring quality data to the enterprise in a matter of months. But if you must build, at lease build with the world's best technology stack in a way that simplifies the eventual upgrade to Oracle MDM and to the full enterprise wide information architecture that it enables.

  Read the article

• Windows Azure: Announcing release of Windows Azure SDK 2.2 (with lots of goodies)

  - by ScottGu

  Earlier today I blogged about a big update we made today to Windows Azure, and some of the great new features it provides. Today I’m also excited to also announce the release of the Windows Azure SDK 2.2. Today’s SDK release adds even more great features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter The below post has more details on what’s available in today’s Windows Azure SDK 2.2 release.  Also head over to Channel 9 to see the new episode of the Visual Studio Toolbox show that will be available shortly, and which highlights these features in a video demonstration. Visual Studio 2013 Support Version 2.2 of the Window Azure SDK is the first official version of the SDK to support the final RTM release of Visual Studio 2013. If you installed the 2.1 SDK with the Preview of Visual Studio 2013 we recommend that you upgrade your projects to SDK 2.2.  SDK 2.2 also works side by side with the SDK 2.0 and SDK 2.1 releases on Visual Studio 2012: Integrated Windows Azure Sign In within Visual Studio Integrated Windows Azure Sign-In support within Visual Studio is one of the big improvements added with this Windows Azure SDK release.  Integrated sign-in support enables developers to develop/test/manage Windows Azure resources within Visual Studio without having to download or use management certificates.  You can now just right-click on the “Windows Azure” icon within the Server Explorer inside Visual Studio and choose the “Connect to Windows Azure” context menu option to connect to Windows Azure: Doing this will prompt you to enter the email address of the account you wish to sign-in with: You can use either a Microsoft Account (e.g. Windows Live ID) or an Organizational account (e.g. Active Directory) as the email.  The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio Server Explorer (and you can start using them): With this new integrated sign in experience you are now able to publish web apps, deploy VMs and cloud services, use Windows Azure diagnostics, and fully interact with your Windows Azure services within Visual Studio without the need for a management certificate.  All of the authentication is handled using the Windows Azure Active Directory associated with your Windows Azure account (details on this can be found in my earlier blog post). Integrating authentication this way end-to-end across the Service Management APIs + Dev Tools + Management Portal + PowerShell automation scripts enables a much more secure and flexible security model within Windows Azure, and makes it much more convenient to securely manage multiple developers + administrators working on a project.  It also allows organizations and enterprises to use the same authentication model that they use for their developers on-premises in the cloud.  It also ensures that employees who leave an organization immediately lose access to their company’s cloud based resources once their Active Directory account is suspended. Filtering/Subscription Management Once you login within Visual Studio, you can filter which Windows Azure subscriptions/regions are visible within the Server Explorer by right-clicking the “Filter Services” context menu within the Server Explorer.  You can also use the “Manage Subscriptions” context menu to mange your Windows Azure Subscriptions: Bringing up the “Manage Subscriptions” dialog allows you to see which accounts you are currently using, as well as which subscriptions are within them: The “Certificates” tab allows you to continue to import and use management certificates to manage Windows Azure resources as well.  We have not removed any functionality with today’s update – all of the existing scenarios that previously supported management certificates within Visual Studio continue to work just fine.  The new integrated sign-in support provided with today’s release is purely additive. Note: the SQL Database node and the Mobile Service node in Server Explorer do not support integrated sign-in at this time. Therefore, you will only see databases and mobile services under those nodes if you have a management certificate to authorize access to them.  We will enable them with integrated sign-in in a future update. Remote Debugging Cloud Resources within Visual Studio Today’s Windows Azure SDK 2.2 release adds support for remote debugging many types of Windows Azure resources. With live, remote debugging support from within Visual Studio, you are now able to have more visibility than ever before into how your code is operating live in Windows Azure.  Let’s walkthrough how to enable remote debugging for a Cloud Service: Remote Debugging of Cloud Services To enable remote debugging for your cloud service, select Debug as the Build Configuration on the Common Settings tab of your Cloud Service’s publish dialog wizard: Then click the Advanced Settings tab and check the Enable Remote Debugging for all roles checkbox: Once your cloud service is published and running live in the cloud, simply set a breakpoint in your local source code: Then use Visual Studio’s Server Explorer to select the Cloud Service instance deployed in the cloud, and then use the Attach Debugger context menu on the role or to a specific VM instance of it: Once the debugger attaches to the Cloud Service, and a breakpoint is hit, you’ll be able to use the rich debugging capabilities of Visual Studio to debug the cloud instance remotely, in real-time, and see exactly how your app is running in the cloud. Today’s remote debugging support is super powerful, and makes it much easier to develop and test applications for the cloud.  Support for remote debugging Cloud Services is available as of today, and we’ll also enable support for remote debugging Web Sites shortly. Firewall Management Support with SQL Databases By default we enable a security firewall around SQL Databases hosted within Windows Azure.  This ensures that only your application (or IP addresses you approve) can connect to them and helps make your infrastructure secure by default.  This is great for protection at runtime, but can sometimes be a pain at development time (since by default you can’t connect/manage the database remotely within Visual Studio if the security firewall blocks your instance of VS from connecting to it). One of the cool features we’ve added with today’s release is support that makes it easy to enable and configure the security firewall directly within Visual Studio.  Now with the SDK 2.2 release, when you try and connect to a SQL Database using the Visual Studio Server Explorer, and a firewall rule prevents access to the database from your machine, you will be prompted to add a firewall rule to enable access from your local IP address: You can simply click Add Firewall Rule and a new rule will be automatically added for you. In some cases, the logic to detect your local IP may not be sufficient (for example: you are behind a corporate firewall that uses a range of IP addresses) and you may need to set up a firewall rule for a range of IP addresses in order to gain access. The new Add Firewall Rule dialog also makes this easy to do.  Once connected you’ll be able to manage your SQL Database directly within the Visual Studio Server Explorer: This makes it much easier to work with databases in the cloud. Visual Studio 2013 RTM Virtual Machine Images Available for MSDN Subscribers Last week we released the General Availability Release of Visual Studio 2013 to the web.  This is an awesome release with a ton of new features. With today’s Windows Azure update we now have a set of pre-configured VM images of VS 2013 available within the Windows Azure Management Portal for use by MSDN customers.  This enables you to create a VM in the cloud with VS 2013 pre-installed on it in with only a few clicks: Windows Azure now provides the fastest and easiest way to get started doing development with Visual Studio 2013. Windows Azure Management Libraries for .NET (Preview) Having the ability to automate the creation, deployment, and tear down of resources is a key requirement for applications running in the cloud.  It also helps immensely when running dev/test scenarios and coded UI tests against pre-production environments. Today we are releasing a preview of a new set of Windows Azure Management Libraries for .NET.  These new libraries make it easy to automate tasks using any .NET language (e.g. C#, VB, F#, etc).  Previously this automation capability was only available through the Windows Azure PowerShell Cmdlets or to developers who were willing to write their own wrappers for the Windows Azure Service Management REST API. Modern .NET Developer Experience We’ve worked to design easy-to-understand .NET APIs that still map well to the underlying REST endpoints, making sure to use and expose the modern .NET functionality that developers expect today: Portable Class Library (PCL) support targeting applications built for any .NET Platform (no platform restriction) Shipped as a set of focused NuGet packages with minimal dependencies to simplify versioning Support async/await task based asynchrony (with easy sync overloads) Shared infrastructure for common error handling, tracing, configuration, HTTP pipeline manipulation, etc. Factored for easy testability and mocking Built on top of popular libraries like HttpClient and Json.NET Below is a list of a few of the management client classes that are shipping with today’s initial preview release: .NET Class Name Supports Operations for these Assets (and potentially more) ManagementClient Locations Credentials Subscriptions Certificates ComputeManagementClient Hosted Services Deployments Virtual Machines Virtual Machine Images & Disks StorageManagementClient Storage Accounts WebSiteManagementClient Web Sites Web Site Publish Profiles Usage Metrics Repositories VirtualNetworkManagementClient Networks Gateways Automating Creating a Virtual Machine using .NET Let’s walkthrough an example of how we can use the new Windows Azure Management Libraries for .NET to fully automate creating a Virtual Machine. I’m deliberately showing a scenario with a lot of custom options configured – including VHD image gallery enumeration, attaching data drives, network endpoints + firewall rules setup - to show off the full power and richness of what the new library provides. We’ll begin with some code that demonstrates how to enumerate through the built-in Windows images within the standard Windows Azure VM Gallery.  We’ll search for the first VM image that has the word “Windows” in it and use that as our base image to build the VM from.  We’ll then create a cloud service container in the West US region to host it within: We can then customize some options on it such as setting up a computer name, admin username/password, and hostname.  We’ll also open up a remote desktop (RDP) endpoint through its security firewall: We’ll then specify the VHD host and data drives that we want to mount on the Virtual Machine, and specify the size of the VM we want to run it in: Once everything has been set up the call to create the virtual machine is executed asynchronously In a few minutes we’ll then have a completely deployed VM running on Windows Azure with all of the settings (hard drives, VM size, machine name, username/password, network endpoints + firewall settings) fully configured and ready for us to use: Preview Availability via NuGet The Windows Azure Management Libraries for .NET are now available via NuGet. Because they are still in preview form, you’ll need to add the –IncludePrerelease switch when you go to retrieve the packages. The Package Manager Console screen shot below demonstrates how to get the entire set of libraries to manage your Windows Azure assets: You can also install them within your .NET projects by right clicking on the VS Solution Explorer and using the Manage NuGet Packages context menu command.  Make sure to select the “Include Prerelease” drop-down for them to show up, and then you can install the specific management libraries you need for your particular scenarios: Open Source License The new Windows Azure Management Libraries for .NET make it super easy to automate management operations within Windows Azure – whether they are for Virtual Machines, Cloud Services, Storage Accounts, Web Sites, and more.  Like the rest of the Windows Azure SDK, we are releasing the source code under an open source (Apache 2) license and it is hosted at https://github.com/WindowsAzure/azure-sdk-for-net/tree/master/libraries if you wish to contribute. PowerShell Enhancements and our New Script Center Today, we are also shipping Windows Azure PowerShell 0.7.0 (which is a separate download). You can find the full change log here. Here are some of the improvements provided with it: Windows Azure Active Directory authentication support Script Center providing many sample scripts to automate common tasks on Windows Azure New cmdlets for Media Services and SQL Database Script Center Windows Azure enables you to script and automate a lot of tasks using PowerShell.  People often ask for more pre-built samples of common scenarios so that they can use them to learn and tweak/customize. With this in mind, we are excited to introduce a new Script Center that we are launching for Windows Azure. You can learn about how to scripting with Windows Azure with a get started article. You can then find many sample scripts across different solutions, including infrastructure, data management, web, and more: All of the sample scripts are hosted on TechNet with links from the Windows Azure Script Center. Each script is complete with good code comments, detailed descriptions, and examples of usage. Summary Visual Studio 2013 and the Windows Azure SDK 2.2 make it easier than ever to get started developing rich cloud applications. Along with the Windows Azure Developer Center’s growing set of .NET developer resources to guide your development efforts, today’s Windows Azure SDK 2.2 release should make your development experience more enjoyable and efficient. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• CRMIT’s HIGH VALUE CRM++ PLUGINS FOR CRM On DEMAND

  - by Soumo Das

  Customer satisfaction and experience being the two most considerable factors, these days businesses are on the lookout for automation tools that are world class, agile and keep quality at its core. CRMIT has developed such tools using cutting edge technologies and abstracting industry best practices and R&D.  Self Service Portal  With customers being so meticulous about regular updates and reliable access to their data, administrators just cannot think of walking a thin line. Surviving without a resource that provides a track of customer requirements for services available 24 x 7 can severely affect the productivity. In such a scenario, CRMIT’s Self Service Portal (SSP) is the best solution. This not only tracks the required customer data, but also allows companies to stay in tune with their employees, vendors and stakeholders.   One can directly sign up to become a CRMOD contact and SSP user. One need not use the database, as operations and interactions are d at run time. This is a fully configurable solution that tracks results periodically, thus making it easy for end users. It also offers better security and data visibility that enables users to progress smoothly. Quote and Order Management   When dealing with quotes, contracts and orders becomes complicated, only Quote & Order Management can work as a one-stop solution. CRMIT offers this great tool for managing all this information and for taking care of customer orders and service requirements.  This CRM On Demand plug-in allows one to create a new quote or copy the existing one. Products can be directly added from the product list of CRMOD and the pricing is calculated automatically. Quote can be generated and mailed to the external users in PDF, HTML and XLS formats. This not only allows management of quotes in an enhanced manner, but also supports various billing and tax calculation features that make work effortless.    Report Scheduler  When it comes to analyzing and providing statistics of various business processes currently running in an organization, one cannot depend on manual updates, which sometimes may be inaccurate or even delayed. CRMIT provides a SaaS based powerful solution - Report Scheduler - that allows CRM users to schedule reports as per the frequencies and then receive them as email attachments at the scheduled time.   With this powerful tool, administrators can control the report scheduler for assigning specific reports to specific users. After that, users can login and schedule any assigned report for viewing at particular intervals on monthly, weekly or daily basis. Additionally, users can also copy the mail to external users and can choose the preferred format. The best part is that sharing business data with third party become easy with this and for viewing reports, users need not log into their CRMOD account.  CRM On Demand Offline Solution CRM On-Demand Offline is another great CRM++ extension that allows one to work in both online and offline modes. Synchronizing both the modes is absolutely easy and offers ease while working. CRM OD offline works as an automation tool that not only improves efficiency, but also works as a backup in most cases. It is readily available as a windows application installer and requires users to be online only while validating and synchronizing. The best part is that working in the offline mode also works as a backup. 

  Read the article

• Plymouth and GRUB do not show at all

  - by WarriorIng64

  I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

  Read the article

• SQL SERVER – CXPACKET – Parallelism – Advanced Solution – Wait Type – Day 7 of 28

  - by pinaldave

  Earlier we discussed about the what is the common solution to solve the issue with CXPACKET wait time. Today I am going to talk about few of the other suggestions which can help to reduce the CXPACKET wait. If you are going to suggest that I should focus on MAXDOP and COST THRESHOLD – I totally agree. I have covered them in details in yesterday’s blog post. Today we are going to discuss few other way CXPACKET can be reduced. Potential Reasons: If data is heavily skewed, there are chances that query optimizer may estimate the correct amount of the data leading to assign fewer thread to query. This can easily lead to uneven workload on threads and may create CXPAKCET wait. While retrieving the data one of the thread face IO, Memory or CPU bottleneck and have to wait to get those resources to execute its tasks, may create CXPACKET wait as well. Data which is retrieved is on different speed IO Subsystem. (This is not common and hardly possible but there are chances). Higher fragmentations in some area of the table can lead less data per page. This may lead to CXPACKET wait. As I said the reasons here mentioned are not the major cause of the CXPACKET wait but any kind of scenario can create the probable wait time. Best Practices to Reduce CXPACKET wait: Refer earlier article regarding MAXDOP and Cost Threshold. De-fragmentation of Index can help as more data can be obtained per page. (Assuming close to 100 fill-factor) If data is on multiple files which are on multiple similar speed physical drive, the CXPACKET wait may reduce. Keep the statistics updated, as this will give better estimate to query optimizer when assigning threads and dividing the data among available threads. Updating statistics can significantly improve the strength of the query optimizer to render proper execution plan. This may overall affect the parallelism process in positive way. Bad Practice: In one of the recent consultancy project, when I was called in I noticed that one of the ‘experienced’ DBA noticed higher CXPACKET wait and to reduce them, he has increased the worker threads. The reality was increasing worker thread has lead to many other issues. With more number of the threads, more amount of memory was used leading memory pressure. As there were more threads CPU scheduler faced higher ‘Context Switching’ leading further degrading performance. When I explained all these to ‘experienced’ DBA he suggested that now we should reduce the number of threads. Not really! Lower number of the threads may create heavy stalling for parallel queries. I suggest NOT to touch the setting of number of the threads when dealing with CXPACKET wait. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest reading book on-line for further clarification. All the discussion of Wait Stats over here is generic and it varies by system to system. You are recommended to test this on development server before implementing to production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Silverlight Cream for June 08, 2010 -- #877

  - by Dave Campbell

  In this Issue: Miroslav Miroslavov, Chris Klug, Beau, Christian Schormann(-2-), Dan Wahlin, Pete Brown, Michael S. Scherotter, Philipp Sumi, Andy Wigley, and Phil Middlemiss. Shoutouts: Mark Tucker set about learning Caliburn, and in the process is writing a Caliburn Book: Chapters 1-3 Jesse Liberty has a great link-laden post up about why we should all be learning/using Blend: Why Developers Should, Must, Do Care About The New Expression Blend be sure to read what he says about WP7 development, however! Charlie Kindel announced an Install problem with the Developer Tools CTP Refresh and the WP7 tools... check this out if you're having problems. John Papa has a good post up on the happenings yesterday: Expression Studio 4 Launch of Blend, SketchFlow, Encoder and More! Erik Mork & Company's latest "This Week in Silverlight" is titled First Drop: Prism v4 – First Drop is Available From SilverlightCream.com: Animated navigation between Pages Miroslav Miroslavov has Part 8 of his "Silverlight in Action" series up, detailing cool things from the CompleteIT site... this one is on Animated navigation between pages. Subtitling videos Chris Klug got a gig adding subtitles to videos for Microsoft (sweet) ... and no, not *that* kind of subtitles... read how he approached the final solution. Silverlight Watermark TextBox I'm not sure we can have too many Watermark TextBoxes, and neither does Beau , who sent me a link to this one... give it a dance and decide. Blend 4: Collaborative SketchFlow Feedback with SharePoint With the new Blend release, Christian Schormann has a post up describing the lashup to Sharepoint for sharing Sketchflow and getting feedback. New Utility, Links, and Tutorials for Path-Based Layout Christian Schormann also has a collection of resources for Path-Based Layouts, including a utility "that lets you apply a whole bunch of position-specific effects without having to write any code"... lots of links to resources here. Tales from the Trenches – Building a Real-World Silverlight Line of Business Application Dan Wahlin draws on his recent experience and lays out some of the fun and pitfalls of building LOB apps in Silverlight... WCF, MVVM, slides, and code included WPF (and Silverlight): Choose your Fonts and Text Rendering Options Wisely Pete Brown has a great post up on using fonts wisely across multiple platforms... lots of info and good discussion in the comments as well. Ball Watch USA Remember the awesome watch Michael S. Scherotter did in Silverlight 1 and then converted to Updated Ball Trainmaster Cannonball Watch to Silverlight 2? Well... there's now a contest underfoot and 8 videos to help you get started... all good stuff, and good luck! ... Michael has a post up about the contest: Enter to Win a Ball Watch by Creating One in Silverlight Announcing Sketchables – Rapid Mockup Creation with SketchFlow By way of Jesse Libertyhttp://jesseliberty.com/2010/06/08/why-developers-should-must-do-care-about-the-new-expression-blend/, this is a cool production by Philipp Sumi about a simple mockup framework he's created. Perst - a database for Windows Phone 7 Silverlight I think one of my first comments to Michael Washington back at the MVP Summit 2010 was that we'd need a database engine, and too cool, but we've got one, Andy Wigley discusses Perst in this post... to save you some time, here's the Perst site A Chrome and Glass Theme - Part 7 Phil Middlemiss has part 7 of his great theme-building series up... this time he's giving the accordian control a once-over. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Expert F# &ndash; Pattern Matching with Adam and Eve

  - by MarkPearl

  So I am loving my Expert F# book. I wish I had more time with it, but the little time I get I really enjoy. However today I was completely stumped by what the book was trying to get across with regards to pattern matching. On Page 38 – Chapter 3, it briefly describes F# option values. On this page it gives the code snippet along the code lines below and then goes on to speak briefly about pattern matching... open System type 'a option = | None | Some of 'a let people = [ ("Adam", None); ("Eve", None); ("Cain", Some("Adam", "Eve")); ("Abel", Some("Adam", "Eve")) ] let showParents(name, parents) = match parents with | Some(dad, mum) -> printfn "%s has father %s, mother %s" name dad mum | None -> printfn "%s has no parents!" name Console.WriteLine(showParents("Adam", None))   Originally when I read this code I think I misunderstood the purpose of the example code. I for some reason thought that the showParents function would magically be parsing the people array and looking for a match of name and then showing the parents. But obviously it cannot do this since there is no reference to the people array in the showParents method. After rereading the page I realized that I had just combined the two segments of code together, possibly incorrectly, and that a better example would have been to have a code snippet like the following. let showParents(name, parents) = match parents with | Some(dad, mum) -> printfn "%s has father %s, mother %s" name dad mum | None -> printfn "%s has no parents!" name Console.WriteLine(showParents("Adam", None)) Console.WriteLine(showParents("Cain", Some("Adam", "Eve"))) Console.ReadLine()   However, what if I wanted to have a function that was passed a list of people and a name would then show the parents of the name if there were any, and if not would show that they had no parents… so that doesnt seem to difficult does it… lets look at my very unoptimized noob F# code to try and achieve this… open System let people = [ ("Adam", None); ("Eve", None); ("Cain", Some("Adam", "Eve")); ("Abel", Some("Adam", "Eve")) ] // // returns the name of the person // let showName(person : string * (string * string) option) = let name = fst(person) name // // Returns a string with the parents details or not // let showParents(itemData : string * (string * string) option) = let name = fst(itemData) let parents = snd(itemData) match parents with | Some(dad, mum) -> "Father " + dad + " and Mother " + mum | None -> "Has no parents!" // // Prints the details // let showDetails(person : string * (string * string) option) = Console.WriteLine(showName(person)) Console.WriteLine(showParents(person)) // // Check if the name matches the first portion of person // if so, return true, else return false // let nameMatch(name : string , person : string * (string * string) option) = match name with | x when x = fst(person) -> true | _ -> false // // Searches an array of people and looks for a match of names // let findPerson(name : string, people : (string * (string * string) option) list) = let o = Seq.tryFind(fun x -> nameMatch(name, x)) people if Option.isSome o then o else Option.None // // Try and find a person, if found show their details // else show no match // let FoundPerson = findPerson("Cain", people) match FoundPerson with | None -> Console.WriteLine("Not found") | Some(x) -> showDetails(x) Console.ReadLine() So, my code isn’t the cleanest but it did teach me a bit more F#. The area that I learnt about was the option keyword. The challenge being, if a match of the name isn’t found – and if a name is found but the person doesn’t have parents it should react accordingly. I’m pretty sure I can optimize this code quite a bit more and I think I may come back to it sometime in the future and relook at it, but for now at least I was able to achieve what I wanted.. and my brain has gone just that wee little bit more functional.

  Read the article

• Dynamically creating meta tags in asp.net mvc

  - by Jalpesh P. Vadgama

  As we all know that Meta tag has very important roles in Search engine optimization and if we want to have out site listed with good ranking on search engines then we have to put meta tags. Before some time I have blogged about dynamically creating meta tags in asp.net 2.0/3.5 sites, in this blog post I am going to explain how we can create a meta tag dynamically very easily. To have meta tag dynamically we have to create a meta tag on server-side. So I have created a method like following. public string HomeMetaTags() { System.Text.StringBuilder strMetaTag = new System.Text.StringBuilder(); strMetaTag.AppendFormat(@"<meta content='{0}' name='Keywords'/>","Home Action Keyword"); strMetaTag.AppendFormat(@"<meta content='{0}' name='Descption'/>", "Home Description Keyword"); return strMetaTag.ToString(); } Here you can see that I have written a method which will return a string with meta tags. Here you can write any logic you can fetch it from the database or you can even fetch it from xml based on key passed. For the demo purpose I have written that hardcoded. So it will create a meta tag string and will return it. Now I am going to store that meta tag in ViewBag just like we have a title tag. In this post I am going to use standard template so we have our title tag there in viewbag message. Same way I am going save meta tag like following in ViewBag. public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; ViewBag.MetaTag = HomeMetaTags(); return View(); } Here in the above code you can see that I have stored MetaTag ViewBag. Now as I am using standard ASP.NET MVC3 template so we have our we have out head element in Shared folder _layout.cshtml file. So to render meta tag I have modified the Head tag part of _layout.cshtml like following. <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script> @Html.Raw(ViewBag.MetaTag) </head> Here in the above code you can see I have use @Html.Raw method to embed meta tag in _layout.cshtml page. This HTML.Raw method will embed output to head tag section without encoding html. As we have already taken care of html tag in string function we don’t need the html encoding. Now it’s time to run application in browser. Now once you run your application in browser and click on view source you will find meta tag for home page as following. That’s its It’s very easy to create dynamically meta tag. Hope you liked it.. Stay tuned for more.. Till then happy programming.

  Read the article

• Create a Search Filter List in Google Chrome

  - by Asian Angel

  Are you tired of unwanted and/or non-relevant results cluttering up the search results at Bing, Yahoo, and Google? With the Search Filter extension for Chrome you can easily remove the unwanted “chaff” from your search results. Note: The extension only works on Bing, Yahoo, and Google at this time. Before For our example we conducted a search for “anime wallpapers” at Yahoo Singapore, Bing Singapore, and Google. In each set of results we decided to focus on results that would display either a yellow or red warning color from WOT. You can see our targeted result for Yahoo Singapore… The one for Bing Singapore… And the targeted result from Google. Search Filter in Action As soon as you install the extension you should take a quick look at the “Options”. At first the “Filters List Area” will be empty but will not remain so for long as you create your own filter list. The second part may or may not be of interest to you…the ability to opt into the filter service. If you opt in your filter list will be connected to your “Google Account” and will be available on any of your Chrome installs with the extension installed (and set to “Opt In”). Keep in mind that if you choose this option the filter list that you create will be aggregated anonymously and have a GUID number attached to it. After installing the extension we refreshed each of our three search pages…notice the small red circle button beside each search result link. Clicking on the red circle button will cause the entire browser window area to “shade out” temporarily while you decide between adding that website to the filter list or cancelling the action. If you add a website to the filter list that result will immediately disappear from the search results list without refreshing the webpage. Looks like we have another website at the bottom that we could add to the filter list… Click, click, click! After adding one website from each of the three search services you can see that our filter list has gotten off to a nice start. If for some reason you accidentally add a website to the list or change your mind about a website simply click on the red circle button to remove that particular listing. Conclusion If you are looking for an easy way to create a search filter list then this is definitely an extension that is worth taking the time to look at. Links Download the Search Filter extension (Google Chrome Extensions) Visit the Search Filter Hub Website to View Lists of Filtered Sites Similar Articles Productive Geek Tips How to Make Google Chrome Your Default BrowserGeek’s Spam Filter – Updated to Version 0.2Access Wolfram Alpha Search in Google ChromeGain Access to a Search Box in Google ChromeGeek’s Spam Filter – Updated to Version 0.3 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats

  Read the article

• 24 hours to pass until 24 Hours of PASS

  - by Rob Farley

  There’s a bunch of stuff going on at the moment in the SQL world, so if you’ve missed this particular piece of news, let me tell you a bit about it. Twice a year, the SQL community puts on its biggest virtual event – 24 Hours of PASS. And the next one is tomorrow – March 21st, 2012. Twenty-four sessions, back-to-back, featuring a selection of some of the best presenters in the SQL world, speakers from all over the world, coming together in an online collaboration that so far has well over thirty thousand registrations across the presentations. Some people are signed up for all 24 sessions, some only one. Traditionally, LiveMeeting has been used as the platform for this event, but this year we’re going with a new platform – IBTalk. It promises big, and we’re hoping it won’t let us down. LiveMeeting has been great, and we thank Microsoft for providing it as a platform for the past few years. However, as the event has grown, we’ve found that a new idea is necessary. Last year a search was done for a new platform, and IBTalk ticked the right boxes. The feedback from the presenters and moderators so far has been overwhelmingly positive, and we’re hoping that this is going to really enhance the user experience. One of my favourite features of the platform is the language side. It provides a pretty good translation service. Users who join a session will see a flag on the left of the screen. If they click it, they can change the language to one of 15 on offer. Picking this changes all the labels on everything. It even translates the text in the Q&A window. What this means is that someone from Brazil can ask their question in Portuguese, and the presenter will see it in English. Then if the answer is typed in English, the questioner will be able to see the answer, also in Portuguese. Or they can switch to English to see it as the answerer typed it. I know there’s always the risk of bad translations going on, but I’ve heard good things about this translation service. But there’s more – IBTalk are providing staff to type up closed captioning live during the event. So if English isn’t your first language, don’t worry! Picking your language will also let you see subtitles in your chosen language. I’m hoping that this event is the start of PASS being able to reach people from all corners of the world. Wouldn’t it be great to find that this event is successful, and that the next 24HOP (later in the year, our Summit Preview event) has just as many non-English speakers tuning in as English speakers? If you haven’t been planning which sessions you’re going to attend, you really should get over to sqlpass.org/24hours and have a look through what’s on offer. There’s some amazing material from some of the industry’s brightest, covering a wide range of topics, from classic SQL areas to the brand new SQL 2012 features. There really should be something for every SQL professional. Check the time zones though – if you’re in the US you might be on Summer time, and an hour closer to GMT than normal. Massive thanks must go to Microsoft, SQL Sentry and Idera for sponsoring this event. Without sponsors we wouldn’t be able to put any of this on. These companies are helping 24HOP continue to grow into an event for the whole world. See you tomorrow! @rob_farley | #24hop | #sqlpass

  Read the article

• 24 hours to pass until 24 Hours of PASS

  - by Rob Farley

  There’s a bunch of stuff going on at the moment in the SQL world, so if you’ve missed this particular piece of news, let me tell you a bit about it. Twice a year, the SQL community puts on its biggest virtual event – 24 Hours of PASS. And the next one is tomorrow – March 21st, 2012. Twenty-four sessions, back-to-back, featuring a selection of some of the best presenters in the SQL world, speakers from all over the world, coming together in an online collaboration that so far has well over thirty thousand registrations across the presentations. Some people are signed up for all 24 sessions, some only one. Traditionally, LiveMeeting has been used as the platform for this event, but this year we’re going with a new platform – IBTalk. It promises big, and we’re hoping it won’t let us down. LiveMeeting has been great, and we thank Microsoft for providing it as a platform for the past few years. However, as the event has grown, we’ve found that a new idea is necessary. Last year a search was done for a new platform, and IBTalk ticked the right boxes. The feedback from the presenters and moderators so far has been overwhelmingly positive, and we’re hoping that this is going to really enhance the user experience. One of my favourite features of the platform is the language side. It provides a pretty good translation service. Users who join a session will see a flag on the left of the screen. If they click it, they can change the language to one of 15 on offer. Picking this changes all the labels on everything. It even translates the text in the Q&A window. What this means is that someone from Brazil can ask their question in Portuguese, and the presenter will see it in English. Then if the answer is typed in English, the questioner will be able to see the answer, also in Portuguese. Or they can switch to English to see it as the answerer typed it. I know there’s always the risk of bad translations going on, but I’ve heard good things about this translation service. But there’s more – IBTalk are providing staff to type up closed captioning live during the event. So if English isn’t your first language, don’t worry! Picking your language will also let you see subtitles in your chosen language. I’m hoping that this event is the start of PASS being able to reach people from all corners of the world. Wouldn’t it be great to find that this event is successful, and that the next 24HOP (later in the year, our Summit Preview event) has just as many non-English speakers tuning in as English speakers? If you haven’t been planning which sessions you’re going to attend, you really should get over to sqlpass.org/24hours and have a look through what’s on offer. There’s some amazing material from some of the industry’s brightest, covering a wide range of topics, from classic SQL areas to the brand new SQL 2012 features. There really should be something for every SQL professional. Check the time zones though – if you’re in the US you might be on Summer time, and an hour closer to GMT than normal. Massive thanks must go to Microsoft, SQL Sentry and Idera for sponsoring this event. Without sponsors we wouldn’t be able to put any of this on. These companies are helping 24HOP continue to grow into an event for the whole world. See you tomorrow! @rob_farley | #24hop | #sqlpass

  Read the article

• MVC 2 jQuery Client-side Validation

  - by nmarun

  Well, I watched Phil Haack’s show What's New in Microsoft ASP.NET MVC 2 and was impressed about the client-side validation (starts at 17:45) that MVC 2 offers. I tried creating the same, but Phil does not show what .js files need to be included and also I was not able to find the source code for the application that he used. In order to find out the required JavaScript file references, I added all of the files in my application to the page and ran it. Of course it worked, but this is definitely not an optimum solution. By removing one at a time and testing the app, I’ve short-listed the following ones: 1: <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script 2: <script src="../../Scripts/MicrosoftAjax.js" type="text/javascript"></script> 3: <script src="../../Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> Now, a little about the feature itself. Say, I’m working with a Book application so my model will look something like: 1: public class Book 2: { 3: [HiddenInput(DisplayValue = false)] 4: public int BookId { get; set; } 5:  6: [DisplayName("Book Title")] 7: [Required(ErrorMessage = "Book title is required")] 8: [StringLength(20, ErrorMessage = "Must be under 20 characters")] 9: public string Title { get; set; } 10:  11: [Required(ErrorMessage = "Author is required")] 12: [StringLength(40, ErrorMessage = "Must be under 40 characters")] 13: public string Author { get; set; } 14:  15: public decimal Price { get; set; } 16: 17: [DisplayName("ISBN")] 18: [StringLength(13, ErrorMessage = "Must be 13 characters")] 19: public string Isbn { get; set; } 20: } This ensures that the data passed will be validated upon post. But what would happen if you add the line (along with the above mentioned .js files): 1: <% Html.EnableClientValidation(); %> Now, this acts as ‘on-the-fly’ or ‘real-time’ validation. Now, when the user types 20 characters for the Title, the error shows up right on the 21st character. Beautiful… and you do not have to create the JavaScript function(s) for this. They’re auto-magically created for you. (Doing a ‘View Source’ on the browser page shows you the JavaScript logic that goes on behind the scenes). I bumped into another post that shows how .net 4 allows us to create custom validation attributes: Dynamic Range validation in MVC 2. This will help us attach virtually any business logic to the model itself. Please see the source code I’ve worked with.

  Read the article

< Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >