Search Results

Search found 36081 results on 1444 pages for 'object expected'.

Page 788/1444 | < Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• What determines what resolutions a laptop is willing to output over VGA?

  - by Joshua McKinnon

  I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

  Read the article

• nginx proxy_pass POST 404 errors

  - by Scott

  I have nginx proxying to an app server, with the following configuration: location /app/ { # send to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } Any request for /app goes to :9001, whereas the default site is hosted on :9000. GET requests work fine. But whenever I submit a POST request to /app/any/post/url it results in a 404 error. Hitting the url directly in the browser via GET /app/any/post/url hits the app server as expected. I found online other people with similar problems and added proxy_set_header Host $http_host; but this hasn't resolved my issue. Any insights are appreciated. Thanks. Full config below: server { listen 9000; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /home/scott/src/ph-dox/html; # root ../html; TODO: how to do relative paths? index index.html index.htm; # Make site accessible from http://localhost/ server_name localhost; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /app/ { # rewrite here sends to app server without the /app qualifier rewrite /app/(.*)$ /$1 break; proxy_set_header Host $http_host; proxy_pass http://localhost:9001; proxy_redirect http://localhost:9001 http://localhost:9000; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } }

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by mlauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• How do I fix a custom Event Viewer Log that merges automatically with the Application log?

  - by NightOwl888

  I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

  Read the article

• Error installing pygraphviz on OSX

  - by Neil

  I'm trying to get the graph-models to work (from django-command extensions) on Snow Leopard. It requires pygraphviz, which I installed via macports. After successful install I am getting this error: >>> import pygrahphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named pygrahphviz >>> import pygraphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/__init__.py", line 54, in <module> from agraph import AGraph, Node, Edge, Attribute, ItemAttribute File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/agraph.py", line 19, in <module> import graphviz as gv File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/graphviz.py", line 7, in <module> import _graphviz ImportError: dlopen(/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so, 2): Symbol not found: _Agdirected Referenced from: /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so Expected in: flat namespace in /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so >>> Any suggestions?

  Read the article

• Where is my free space?

  - by Andrey

  A week ago I got a low disk space warning on my Vista x64 Ultimate box - 60 Mb free on the disk C; I cleaned up some downloaded msdn images and got 20 Gb freed up. Three days ago I got another notification, it looked suspicious but I didnt have time to deal with it and just moved some heavy stuff to another drive to free up about 17 Gb.... Today morning - 53Mb left on drive C, again! Now it looks really suspecious, so I downloaded TreeSize to see what's taking up the space, just to see it reporting only 121 GB out of 200 GB used, in other words I suppose to have about 79 Gb free. Then I went to Folder Options, enabled viewing of system and hidden files, rerun teh tool to see another 5 Gb added (which is expected). Then I open disk C in windows explorer, select all and right click Properties, to see it reporting teh same amount of files - 126 Gb. But when I look at Drive C properties, it reports that 200GB of 200 Gb are taken. I just scanned the drive with two different antiviruses - Symantec and AVG and found no viruses... I'm a little confused at this point, any ideas where is my free space, woudl be highly appreciated! Thank you! Andrey

  Read the article

• Apache 403 Forbidden Error when accessing local web server using local IP address

  - by amjo324

  I have an odd problem when attempting to browse to pages stored on a local web server (Apache 2.2). The pages are served as expected when I browse to localhost or 127.0.0.1 on port 80. Yet when I attempt to browse to the same pages by referencing the local IP address (192.168.x.x), I receive a HTTP 403 (Forbidden) error. In essence, http://localhost:80 works but 192.168.x.x:80 doesn't even though I'm specifying the IP of the local machine. You may be thinking "who cares? just use localhost". However, this is the first step in troubleshooting why I cannot remotely access these pages from different hosts on my LAN. I'm presuming this can't be a firewall issue as I'm only connecting to the local machine. Even so, I verified there was no iptables rules that could be having an effect. I've checked the Apache error logs and the corresponding line of relevance is: [Sat Oct 19 07:38:35 2013] [error] [client 192.168.x.x] client denied by server configuration: /var/www/ I've inspected most of the apache config files and they don't appear to differ from what you would expect with a default install. I can't see anything in apache2.conf that would be a problem and httpd.conf is an empty file. This is an excerpt from /etc/apache2/sites-enabled/000-default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> Any insight as to where I can look next to find a solution ? Thanks in advance.

  Read the article

• Obey server_name in Nginx

  - by pascal

  I want nginx/0.7.6 (on debian, i.e. with config files in /etc/nginx/sites-enabled/) to serve a site on exactly one subdomain (indicated by the Host header) and nothing on all others. But it staunchly ignores my server_name settings?! In sites-enabled/sub.domain: server { listen 80; server_name sub.domain; location / { … } } Adding a sites-enabled/00-default with server { listen 80; return 444; } Does nothing (I guess it just matches requests with no Host?) server { listen 80; server_name *.domain; return 444; } Does prevent Host: domain requests from giving results for Host: sub.domain, but still treats Host: arbitrary as Host: sub-domain. The, to my eyes, obvious solution isn't accepted: server { listen 80; server_name *; return 444; } Neither is server { listen 80 default_server; return 444; } Since order seems to be important: renaming 00-default to zz-default, which, if sorted, places it last, doesn't change anything. But debian's main config just includes *, so I guess they could be included in some arbitrary file-system defined order? This returns no content when Host: is not sub.domain as expected, but still returns the content when Host is completely missing. I thought the first block should handle exactly that case!? Is it because it's the first block? server { listen 80; return 444; } server { listen 80; server_name ~^.*$; return 444; }

  Read the article

• nginx not serving admin static files?

  - by toto_tico

  First, I want to clarify that this error is just for the admin static files. This means my problem is specific just to the static files that corresponds to the Django admin. The rest of the static files are working perfect. Basically my problem is that for some reason I cannot access those admin static files with the ngix server. It works perfect with the micro server of Django and the collect static is doing its job. This means it is putting the files on the expected place in the static folder. The urls are correct but I cannot even access the admin static files directly, but the others I can. So, for example, I am able to access this url (copying it in the browser): myserver.com:8080/static/css/base/base.css but i am not able to access this other url (copying it in the browser): myserver.com:8080/static/admin/css/admin.css I also tried to copy the admin/ directory structure into other_admin_directory_name/. Then I can access myserver.com:8080/static/other_admin_directory_name/css/admin.css Then, it works. So, I checked permissions and everything is fine. I tried to change ADMIN_MEDIA_PREFIX = '/static/admin/' to ADMIN_MEDIA_PREFIX = '/static/other_admin_directory_name/', it doesn't work. This a mistery in itself that I am exploring but still no luck. Finally, and it seems to be an important clue: I tried to copy the admin/ directory structure into admin_and_then_any_suffix/. Then I cannot access myserver.com:8080/static/admin_and_then_any_suffix//css/admin.css So, if the name of the directory starts with admin (for example administration or admin2) it doesn't work. * added thanks to sarnold observation ** the problem seems to be in the nginx configuration file /etc/nginx/sites-available/mysite location /static/admin { alias /home/vl3/.virtualenvs/vl3/lib/python2.7/site-packages/django/contrib/admin/media/; }

  Read the article

• Matlab computations done over Apple Filing Protocol (AFP) depend on POSIX permissions, ignores ACLs

  - by flumignan

  I'm a system administrator and have never used Matlab, so forgive my general ignorance of the program. My users have encountered problems when executing scripted Matlab actions over AFP to a Mac OS X Server 10.6.7 where the access control list (ACL) should allow actions, but the POSIX-style permissions disallow the activity. It seems as if Matlab, run locally on the Mac workstations on datasets on the remote server, ignores the ACLs entirely. This is the only application I've ever seen behave this way. The server's filesystem is HFS+J and all other activity is performing as expected. These users cannot use CIFS because of our integration with external directory systems. In this example, the directory bxdata, the members of the group cibturner should be able to modify the files. Indeed, they can using any other method except via Matlab scripts. When the Matlab script hits these files, the POSIX permissions of 644 disallow modification. It's as if the ACLs are irrelevant. [root@cib 16:00:24 /14181.2_5sM]# ls -leh@ bxdata/ total 128 -rw-r--r--+ 1 kel32 staff 18K Feb 15 09:31 TS-5sMath030708-21073-1.edat 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown -rw-r--r--+ 1 kel32 staff 25K Feb 15 09:31 TS-5sMath030708-21073-1.txt 0: group:cibturner inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 1: group:cibsrlocaladmins inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown 2: group:crcservergroup inherited allow read,write,execute,append,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown Because this server has HIPAA data, security is critical. We are not using networked home directories or SAN technology. The MatLab program is run on the user's hard drive; access is granted via Kerberized AFP.

  Read the article

• Virtualmin & git integration

  - by weby3456

  I've installed virtualmin on my VPS to manage my websites. It's working perfect and as expected nearly a year now. Recently I wanted to add some features to one of my sites, and I need git integration. I've correctly installed git & gitweb on my server, and I can create repositories and watch them under http://sub.domain.com/git/gitweb.cgi Here is the current relevant directory tree: /home/user/domains/sub.domain.com/public_html/git/ drwxr-sr-x user user . drwxr-x--- user user .. -rw-r--r-- user user git-favicon.png -rw-r--r-- user user git-logo.png -rwxr-xr-x user user gitweb.cgi -rw-r--r-- user user gitweb.css drwxrwx--- apache user reponame.git /home/user/domains/sub.domain.com/public_html/git/reponame.git/ drwxrwx--- apache user . drwxr-sr-x user user .. drwxrwx--- apache user branches -rwxrwx--- apache user config -rwxrwx--- user user description -rwxrwx--- apache user HEAD drwxrwx--- apache user hooks drwxrwx--- apache user info drwxrwx--- apache user objects drwxrwx--- apache user refs But I have some questions: When I'm visiting http://sub.domain.com/git/gitweb.cgi, the owner is listed as 'Apache'. why? how can I change that? Usually, to create a new git repository, I'll do something like: $ mkdir proj $ cd proj $ git init Initialized empty Git repository in /home/user/proj/.git/ // here I'm creating the files or copy them from somewhere else $ git add *.php $ git add README $ git commit -m 'initial version' But after creating the repository in virtualmin, I can find a new dir named 'reponame.git' but not the '.git' dir. When I'm trying to run any git command (e.g. git status) I'm receiving "fatal: This operation must be run in a work tree". How can I work with that repository? Currently I need to explicitly grant access for users to be able to view the repositories via gitweb. How can I make certain repositories public?

  Read the article

• Dual boot nt4 and windows 98

  - by ItFinallyWorks

  I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

  Read the article

• OSX Server 10.5 - Cannot log into Workgroup Manager - diradmin password is correct

  - by Mister IT Guru

  I've got a setup where I am trying to rescue a broken AD. We can no longer authenticate on the Workgroup manager, with passwords being rejected all the time - even though it is correct. I can connect using the workgroup manager on another server and I get the user list as expected, but when I click the padlock to make changes, I get the following screen: The problem is, I know the password is correct, I just used it to connect to the server in the first place. I can log into the server using the local admin, and services such as AFP, VPN and SMB continue to serve users. I have about 300 or so users on this server, and I would very much like to avoid having a rebuild. As there is much configuration that has been done without my knowledge (it's a client machine), I'd like to attempt to fix it, and then create another server and migration OD off this broken machine, then decommission it "gently". Ultimately this would mean no disruption of services. What I'd like it some tips as to how to fix the problem with authenticating to make changes in the work group manager, and maintenance on open directory in general. Thanks

  Read the article

• Drive Mapped On Amazon EC2 Instance Startup Disconnected After Logon

  - by jsn

  I am launching an Amazon EC2 instance (Windows Server 2012), and on startup (though User Data field), it runs this powershell script: <powershell> NET CONFIG SERVER /AUTODISCONNECT:-1 # clear all prior connections net use * /delete /y > C:\delLog.txt 2>&1 # mount new drive net use R: \\dbHost\share /user:username pass /persistent:yes > C:\useLog.txt 2>&1 ipconfig /all > C:\ipLog.txt </powershell> When it launches and I connect to it through RDP, it shows in explorer "Diconnected Network Drive (R:). If I double click it, error message displays "R:\ is not accesible. Access id denied". Normally, it would ask me for credentials to reconnect. I need for this drive to be connected through the duration of the instance. delLog.txt contents: You have these remote connections: T: \\dbHost\share Continuing will cancel the connections. The command completed successfully. useLog.txt contents: The command completed successfully. ipLog.txt contents as expected. The net use commands works fine by itself, it connects. Anyone have any idea what could be wrong? There is only one account on these machines - Administrator. It is a samba share to a Linux server on a private network.

  Read the article

• Cannot login to zabbix web portal

  - by hlx98007

  I've managed to install Zabbix22-server on CentOS 6.x along with php-fpm and nginx. I can view the page of 127.0.0.1 but I can only see this: After clicking the "Login" button, the page is the same: What can I do to make it work as expected, so that I can login as admin? Here are some confs: nginx_zabbix.conf: server { listen 80; add_header X-Frame-Options "SAMEORIGIN"; access_log /var/log/nginx/zabbix.log; error_log /var/log/nginx/zabbix.err.log; client_max_body_size 500M; # This folder is a soft link to /usr/share/zabbix # the permssion has been set to nginx:nginx recursively. root /var/www/zabbix; location / { index index.html index.htm index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; fastcgi_param PATH_INFO $path_info; } } php-fpm is using its default values, with permission user/group set to nginx (rather than apache) Folder /var/lib/php/session has been set to nginx:nginx with permission 770. SELinux is set to disabled. I've restarted everything up to this point.

  Read the article

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• Configure Cisco Pix 515 with DMZ and no NAT

  - by Rickard

  I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

  Read the article

• Neophyte question about using Subtotal and CountIf in Excel

  - by Andrew

  Hi, I'm using Excel and having some problems with Countif and I don't understand how it works differently from SubTotal. I used the GUI to subtotal stuff and all the subtotals are right. Then I attempted to use the Countif to see how many requirements passed. That worked for the first subtotal only. It's easy to see why. When I look at the box for the subtotal, it says: =SUBTOTAL(3,C286:C292) When I look at my formula for passed requirements, I have: =IF(ISTEXT(A285),COUNTIF(C286:C338,"=Passed"),"") Notice that the last column is wrong. How did the Subtotal manage to keep this correct? I typed in the formula for passed requirements and dragged it down the page. Everything behaved as expected (even the bit about ISTEXT dutifully figured out which row was which), but it got the last row wrong. Any ideas? SRS Maintenance Count 7 44 SRS Maintenance Passed SRS Maintenance Passed SRS Maintenance Passed SRS Maintenance Passed SRS Maintenance Passed SRS Maintenance Passed SRS Maintenance Passed SRS Reports Count 12 43 SRS Reports Passed SRS Reports Passed SRS Reports Passed SRS Reports Passed SRS Reports Failed SRS Reports Passed SRS Reports Passed SRS Reports Failed SRS Reports Passed SRS Reports Passed SRS Reports Failed

  Read the article

• Apache Logs - Not Showing Requested URL or User IP

  - by iarfhlaith

  Hey all, I'm having a problem with a server that keeps falling over. Looking through the Apache error logs it appears to come from a rogue PHP script. I'm trying to track this down using Apache's error_log and access_log but the server log format isn't giving me the detail I need. I suspect the log format isn't sufficient, but I've reviewed the Apache documentation and I've included the switches that I think I need to see. Here's my LogFormat configuration in the httpd.conf file: `LogFormat "%h %l %u %t \"%r\" %s %b %U %q %T \"%{Referer}i\" \"%{User-Agent}i\"" extended CustomLog logs/access_log extended` Using the %U %q %T switches I expected to see the requested URL, query string, and the time it took to serve the request, but I'm not seeing any of this information when I tail the log. Here's an example: 127.0.0.1 - - [01/Jun/2010:14:12:04 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:05 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:06 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:07 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:08 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" 127.0.0.1 - - [01/Jun/2010:14:12:09 +0100] "OPTIONS * HTTP/1.0" 200 - * 0 "-" "Apache/2.2.15 (Unix) mod_ssl/2.2.15 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 (internal dummy connection)" Have a made a mistake in configuring the LogFormat or is it something else? Also, each request appears to come from the localhost. How come it's not giving me the remote user's IP address? Thanks, Iarfhlaith

  Read the article

• Password Policy seems to be ignored for new Domain on Windows Server 2008 R2

  - by Earl Sven

  I have set up a new Windows Server 2008 R2 domain controller, and have attempted to configure the Default Domain Policy to permit all types of passwords. When I want to create a new user (just a normal user) in the Domain Users and Computers application, I am prevented from doing so because of password complexity/length reasons. The password policy options configured in the Default Domain Policy are not defined in the Default Domain Controllers Policy, but having run the Group Policy Modelling Wizard these settings do not appear to be set for the Domain Controllers OU, should they not be inherited from the Default Domain policy? Additionally, if I link the Default Domain policy to the Domain Controllers OU, the Group Policy Modelling Wizard indicates the expected values for complexity etc, but I still cannot create a new user with my desired password. The domain is running at the Windows Server 2008 R2 functional level. Any thoughts? Thanks! Update: Here is the "Account policy/Password policy" Section from the GPM Wizard: Policy Value Winning GPO Enforce password history 0 Passwords Remembered Default Domain Policy Maximum password age 0 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 0 characters Default Domain Policy Passwords must meet complexity Disabled Default Domain Policy These results were taken from running the GPM Wizard at the Domain Controllers OU. I have typed them out by hand as the system I am working on is standalone, this is why the table is not exactly the wording from the Wizard. Are there any other policies that could override the above? Thanks!

  Read the article

• PostgreSQL continuous archiving not running archive_command

  - by Whatsit

  I've been trying to set up continuous archiving for a simple, test PostgreSQL 9.0 database, as per the documentation. In postgres.conf I've set: wal_level = archive archive_mode = on archive_command = 'touch /home/myusername/backup/testtouch' archive_timeout = 30s ...and restarted PostgreSQL. The file listed by touch never appears. I can manually run the touch command and it works as expected. If I try to create a backup, it waits forever for the archive_command. In psql; postgres=# SELECT pg_start_backup('touchtest'); pg_start_backup ----------------- 0/14000020 (1 row) postgres=# SELECT pg_stop_backup(); NOTICE: pg_stop_backup cleanup done, waiting for required WAL segments to be archived WARNING: pg_stop_backup still waiting for all required WAL segments to be archived (60 seconds elapsed) HINT: Check that your archive_command is executing properly. pg_stop_backup can be cancelled safely, but the database backup will not be usable without all the WAL segments. What would cause this? How can I troubleshoot it? Additional info: Running on CentOS 5.4. PostgreSQL 9.0.2 installed as root.

  Read the article

• Active Directory Restricted Group confusion

  - by pepoluan

  I am trying to implement Restricted Group policy for my company's AD infrastructure, namely standardizing the local "Administrators" group. The documentation (and various webpages) said that the "Members of this group" policy will wipe out the "Administrators" group. However, an experiment made me confused: I created 2 GPOs: GPO-A replaces the Local Administrators with a list of domain users (e.g., "Alice" and "Bob") GPO-B inserts a domain user (e.g., "Charlie" -- not part of GPO A) into the Local Administrators Experiment 1: GPO-A gets applied first (link order 2) Everything happens as expected: GPO-A cleans out Local Admins and add "Alice" & "Bob" gets added; GPO-B adds "Charlie". Experiment 2: GPO-B is applied first What happens: "Charlie" gets added to the Local Admins group (which also contains 2 local users) The local users on the PC gets deleted, and "Alice" and "Bob" gets added. Result: Local Admins contain "Alice", "Bob", and "Charlie" My confusion: In Experiment 2, I thought GPO-A will totally erase the Local Admins group, including users added by GPO-B (since GPO-A gets applied after GPO-B). As it happens, it only erase local users from the Local Admins, but keeps the domain users. So, is that the way it should be? Or am I doing something incorrectly?

  Read the article

• Postfix selective header_checks: smtpd_relay_restrictions vs. smtpd_recipient_restrictions

  - by luke

  Some of my customers implemented commercial software that violate email-RFCs such that we have had to relax our header checks. In consequence, we receive more spam. Prolog: I know the domains (customer.com) and IP-addresses (a.b.c.d/C) these emails come from Kind request for help: Is it possible to setup one Postfix (2.11) instance on Linux such that: It applies only some header checks for emails from .*@customer.com But applies all header checks for all other email sources? I thought of a combination of mynetworks that includes the subnet a.b.c.d/C in smtpd_recipient_restrictions -- allowing all these messages through -- and simultaneously avoid an open-relay with smtpd_relay_restrictions. However, this has not worked out as expected. Any idea or help is highly appreciated. Thanks in advance. Luke ==EDIT== For the current issue, I solved the problem by prepending REDIRECTs to header_checks as follows: /^received: from.*customer.com.*by mail.own.com.*for.*luke@own.*/ REDIRECT [email protected] This works so far as neeeded. Irrespective thereof, I am still looking for a postfix configuration that would turn this text-based setting into an IP-Address-Range based forwarding rule.... Thanks. Luke

  Read the article

< Previous Page | 784 785 786 787 788 789 790 791 792 793 794 795  | Next Page >