Search Results

Search found 36081 results on 1444 pages for 'object expected'.

Page 791/1444 | < Previous Page | 787 788 789 790 791 792 793 794 795 796 797 798  | Next Page >

• How can I override mod-php5's .php mapping to php4-cgi per VirtualHost or Directory?

  - by geocoo

  I am running Debian Linux with apache2 and libapache2-mod-php5 5.3.3-7. I have one VirtualHost which requires php4. So I researched and compiled php4-cgi. However, I cannot seem to: Override mod-php5's mapping of .php in that vhost (or even globally, without disabling php completley). Even find where that mapping is made, in hope of disabling it and enabling mod-php5 or php4-cgi per vhost. This is my php4-cgi mapping (Inside the one php4 vhost): ScriptAlias /php4 /usr/local/php4/bin <Directory /usr/local/php4/bin> Options +ExecCGI +FollowSymLinks </Directory> <Directory /www/test> AddHandler php4-cgi-script .php Action php4-cgi-script /php4/php Options +ExecCGI </Directory> This does not work, mod-php5 still runs all .php files in that vhost/directory. If I change the file extension in the AddHandler above from .php to .php4, then .php4 files do run php4-cgi as expected, but I can't change all the files in the app to .php4. I thought maybe I could disable the mod-php5's mapping in my vhost or directory, then do my cgi-config (as above) but many combinations of these in different contexts did not work: RemoveHandler .php RemoveType .php php_flag engine off (this seems to even disable my php4-cgi so that wont work) The only other place I can find any mapping is in /etc/mime.types, but commenting out the relevant lines and restarting apache2 does not affect mod-php5's .php mapping. I have searched as much as I can, it is now a mystery to me. Any help or direction would be greatly appreciated.

  Read the article

• Surprising corruption and never-ending fsck after resizing a filesystem.

  - by Steve Kemp

  System in question has Debian Lenny installed, running a 2.65.27.38 kernel. System has 16Gb memory, and 8x1Tb drives running behind a 3Ware RAID card. The storage is managed via LVM. Short version: Running a KVM guest which had 1.7Tb storage allocated to it. The guest was reaching a full-disk. So we decided to resize the disk that it was running upon We're pretty familiar with LVM, and KVM, so we figured this would be a painless operation: Stop the KVM guest. Extend the size of the LVM partition: "lvextend -L+500Gb ..." Check the filesystem : "e2fsck -f /dev/mapper/..." Resize the filesystem: "resize2fs /dev/mapper/" Start the guest. The guest booted successfully, and running "df" showed the extra space, however a short time later the system decided to remount the filesystem read-only, without any explicit indication of error. Being paranoid we shut the guest down and ran the filesystem check again, given the new size of the filesystem we expected this to take a while, however it has now been running for 24 hours and there is no indication of how long it will take. Using strace I can see the fsck is "doing stuff", similarly running "vmstat 1" I can see that there are a lot of block input/output operations occurring. So now my question is threefold: Has anybody come across a similar situation? Generally we've done this kind of resize in the past with zero issues. What is the most likely cause? (3Ware card shows the RAID arrays of the backing stores as being A-OK, the host system hasn't rebooted and nothing in dmesg looks important/unusual) Ignoring brtfs + ext3 (not mature enough to trust) should we make our larger partitions in a different filesystem in the future to avoid either this corruption (whatever the cause) or reduce the fsck time? xfs seems like the obvious candidate?

  Read the article

• Do entries in local 'hosts' files override both forward and reverse name lookups?

  - by Murali Suriar

  If I have the following entries in a hosts file: 192.168.100.1 bugs 192.168.100.2 daffy.example.com 192.168.100.3 elmer.example.com. Will IP-name resolution attempts by local utilies (I assume using 'gethostbyaddr' or the Windows equivalent) honour these entries? Is this behaviour configurable? How does it vary between operating systems? Does it matter whether the 'hosts' file entries are fully qualified or not? EDIT: In response to Russell, my test Linux system is running RHEL 4. My /etc/nsswitch.conf contains the following 'hosts' line: hosts: files dns nis If I ping any of my hosts by name (e.g. bugs, daffy), the forward resolution works correctly. If I traceroute any of them by IP address, the reverse lookup functions as expected. However, if I ping them by IP, ping doesn't appear to resolve their host names. My understanding was that Linux ping would always attempt to resolve IPs to names unless instructed otherwise. Why would traceroute be able to handle reverse lookups in hosts files, but ping not?

  Read the article

• Ubuntu second static IP, ifconfig, /etc/network/interfaces

  - by Schmoove

  I would like to add a second static IP to my local Ubuntu 11.10 desktop machine and have it automatically available after rebooting. So far I am successfully using ifconfig to to temporarily set up an alias for my primary network interface: # ifconfig eth1:0 192.168.178.3 up # ifconfig eth1 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.2 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:feef:a3d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:61929 errors:0 dropped:0 overruns:0 frame:0 TX packets:64034 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:45330863 (45.3 MB) TX bytes:28175192 (28.1 MB) Interrupt:42 Base address:0x4000 eth1:0 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.3 Bcast:192.168.178.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:42 Base address:0x4000 However, when I add the following to /etc/network/interfaces, the alias is not up and running as expected after a reboot: # vi /etc/network/interfaces auto eth1:0 iface eth1:0 inet static address 192.168.178.3 netmask 255.255.255.0 I would like to know what to configure to get this to work. As a side note, I am running gnome shell.

  Read the article

• Change Windows Authentication user for Sql Server Management Studio

  - by Asmor

  We're using Sql Server 2005 with Windows Authentication setup. So normally, when you log in using e.g. Sql Server Management Studio, it forces you to log in at MACHINE_NAME\Username. Anyways, on this one particular computer, the person said they had to make a new account called User01 to do something and showed me where she'd created it under security in the "master" system database. And so now when she logs in, it's listed as MACHINE_NAME\User01 (not the actual Windows user name). It's still set to Windows Authentication, though, and I'm unable to change the login name. Now here's where the real problem comes in... I didn't realize that she was being logged in under this user name at the time, and I disabled it to see what would happen. Now I can't log into the server under her account. I created a new account in Windows called test, and as expected SSMS had the username as MACHINE_NAME\test, and I was able to log in fine. However, the area where the User01 account was listed is not visible to me as far as I can tell and so I can't reenable it. I also tried running the following query: alter login User01 ENABLE And got this error: Msg 15151, Level 16, State 1, Line 1 Cannot alter the login 'User01', because it does not exist or you do not have permission. So in a nutshell, ideally I'd like to reenable User01 somehow, just to get things back to where they used to be. Failing that, how can I force SSMS to log in using the Windows account name as it should be, rather than trying to use User01?

  Read the article

• Home server hard drive: 186k start-stop cycles in 325 days?

  - by j-g-faustus

  I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

  Read the article

• How can i use the `eject` command on a computer i have SSH'd into?

  - by will

  So if i do eject on my machine, it works exactly as expected, however, if i ssh into the machine next to me, and do the same thing, it does not work... my computer: eject: using default device `cdrom' eject: device name is `cdrom' eject: expanded name is `/dev/cdrom' eject: `/dev/cdrom' is a link to `/dev/sr0' eject: `/dev/sr0' is not mounted eject: `/dev/sr0' is not a mount point eject: checking if device "/dev/sr0" has a removable or hotpluggable flag eject: `/dev/sr0' is not a multipartition device eject: trying to eject `/dev/sr0' using CD-ROM eject command eject: CD-ROM eject command succeeded other computer: eject: using default device `cdrom' eject: device name is `cdrom' eject: expanded name is `/dev/cdrom' eject: `/dev/cdrom' is a link to `/dev/sr0' eject: `/dev/sr0' is not mounted eject: `/dev/sr0' is not a mount point eject: checking if device "/dev/sr0" has a removable or hotpluggable flag eject: `/dev/sr0' is not a multipartition device eject: unable to open `/dev/sr0' if i look in the /dev/ dir, then i find cdrom which is a symlink to sr0 - as mentioned by the verbose outputs of eject -v. On my machine, if i try and look at it, if the drive is open, it will close it, and then give this: $ less sr0 sr0 is not a regular file (use -f to see it) so $ less -f sr0 sr0: No medium found but if i do it on the other computer, $ less -f sr0 sr0: Permission denied so i look at the files more, and get this on both machines: $ ls -la sr0 brw-rw----+ 1 root cdrom 11, 0 Nov 12 10:13 sr0 Does anyone know a way around this? I do not have root access.

  Read the article

• IIS6: How to troubleshoot a 404 error in an ASP.NET application?

  - by Tomalak

  I have an ASP.NET application on a Windows Server 2003/IIS6 that refuses to run for some reason (it's the Xerox Centre, if that info helps). It has been working flawlessly before though on this server. Now, all I get if I try to open the app homepage (http://some.intranet.server/XeroxCentreWareWeb/) is a "404 - File or directory not found" error. The app is configured to run in it's own app pool, which runs as Network Service. The Network Service account has read access to the configured directory. If I stop the app pool, I get the expected "Service Unavailable" message, meaning the app and its pool are wired correctly I tried to track down any file permission issues with procmon - nothing to be seen. There isn't even an access to the web app directory happening when the page loads. Interestingly, according to procmon, the web server accesses the 401-2 custom error file (Logon failed due to server configuration) first, but then decides to send the 404 down to the client. EDIT: The app runs with Windows-integrated authentication. Regular users have access to the app directory as well (I would have noticed file system "ACCESS DENIED" messages in procmon, if there had been any.) This makes me think that there is some kind of weird permission problem that occurs even before the application files are being accessed. I just have no idea where to look. I've tried to run the app pool as Local System for a test, but to no avail. What else could I check in this case?

  Read the article

• Investigating a potential CPU failure

  - by Jernej

  On a Ubuntu server that I am using for computations I have recently observed that some CPU extensive programs (GUROBI,CPLEX) often segfault. Being in correspondence with tech support of the respective programs I was suggested that it may be a hardware issue. The administrator of the server performed a detailed memtest and it turned out that the RAM modules appear to be fine. Hence I've used the tool mprime to test the CPU and the following two lines appear multiple times durring the execution of the stress tests: [Worker #4 Oct 18 18:47] FATAL ERROR: Rounding was 0.498046875, expected less than 0.4 [Worker #4 Oct 18 18:47] Hardware failure detected, consult stress.txt file. The stress.txt file in itself is not very verbose about what could be the cause of this error so I would like to ask whether anyone here happens to know what could be the cause of this issue? Is there some other test I could perform to nail the problem even further? The temperature of the system (and all cores) was fine during the entire stress test (+69.0°C (high = +80.0°C, crit = +98.0°C)) the CPU in question is a Intel Core i7-2600K CPU @ 3.40GHz and is not overclocked or modified in any way. Also what is interesting that if I run mprime to only stress the CPU all tests pass fine. The error is only triggered when I let mprime stress the CPU+RAM.

  Read the article

• Xen PV packet loss

  - by Delphinator

  I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

  Read the article

• How to add a privilege to an account in Windows?

  - by mark

  Given: A VM running Windows 2008 I am logged on there using my domain account (SHUNRANET\markk) I have added the "Create global objects" privilege to my domain account: The VM is restarted (I know logout/logon is enough, but I had to restart) I logon again using the same domain account. It seems still to have the privilege: I run some process and examine its Security properties using the Process Explorer. The account does not seem to have the privilege: This is not an idle curiousity. I have a real problem, that without this privilege the named pipe WCF binding works neither on Windows 2008 nor on Windows 7! Here is an interesting discussion on this matter - http://social.msdn.microsoft.com/forums/en-US/wcf/thread/b71cfd4d-3e7f-4d76-9561-1e6070414620. Does anyone know how to make this work? Thanks. EDIT BTW, when I run the process elevated, everything is fine and the process explorer does display the privilege as expected: But I do not want to run it elevated. EDIT2 I equally welcome any solution. Be it configuration only or mixed with code. EDIT3 I have posted the same question on MSDN forums and they have redirected me to this page - http://support.microsoft.com/default.aspx?scid=kb;EN-US;132958. I am yet to determine the relevance of it, but it looks promising. Notice also that it is a completely coding solution that they propose, so whoever moved this post to the ServerFault - please reinstate it back in the StackOverflow.

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

• Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

  - by Simon

  Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

  Read the article

• Fixed and dynamic IPs in ISC DHPD lead to double lease

  - by GorillaPatch

  I would like to have a small dynamic adress part and the most clients are assigned a fixed IP adress. My dhcpd.conf looks like this: use-host-decl-names on; authoritative; allow client-updates; ddns-updates on; # Einstellungen fuer DHCP leases default-lease-time 3600; max-lease-time 86400; lease-file-name "/var/lib/dhcpd/dhcpd.leases"; subnet 192.168.11.0 netmask 255.255.255.0 { ddns-updates on; pool { # IP range which will be assigned statically range 192.168.11.1 192.168.11.240; deny all clients; } pool { # small dynamic range range 192.168.11.241 192.168.11.254; # used for temporary devices } } group { host pc1 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address 192.168.11.11; } } The motivation for the pool declaration with deny all hosts comes from the ISC DHCPD homepage http://www.isc.org/files/auth.html This will allow hosts to be first added to the network, where they will receive a temporary IP from the 241-254 adress range and then later write an explicit host declaration. Upon next connect it will receive the right configuration. The problem is that I am getting error messages that 192.168.11.13 has a dynamic and a static lease. I am a bit confused as I expected the pool declaration with deny all clients would not count as dynamic. Dynamic and static leases present for 192.168.11.13. Remove host declaration pc1 or remove 192.168.11.13 from the dynamic address pool for 192.168.11.0/24 Is there a way to have the DHCP server send an DHCPNA to clients if they have a host statement and retain this dynamic range?

  Read the article

• Why is my filesystem being mounted read-only in linux?

  - by Tim

  I am trying to set up a small linux system based on Gentoo on a VirtualBox machine, as a step towards deploying the same system onto a low-spec Single Board Computer. For some reason, my filesystem is being mounted read-only. In my /etc/fstab, I have: /dev/sda1 / ext3 defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 none /dev/shm tmpfs defaults 0 0 However, once booted /proc/mounts shows rootfs / rootfs rw 0 0 /dev/root / ext3 ro,relatime,errors=continue,barrier=0,data=writeback 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,nosuid,relatime,size=10240k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0 none /dev/shm tmpfs rw,relatime 0 0 usbfs /proc/bus/usb usbfs rw,nosuid,noexec,relatime,devgid=85,devmode=664 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 (the above may contain errors: there's no practical way to copy and paste) The partition at /dev/hda1 is clearly being mounted OK, since I can read all the data, but it's not being mounted as described in fstab. How might I go about diagnosing / resolving this? Edit: I can remount with mount -o remount,rw / and it works as expected, except that /proc/mounts reports /dev/root mounted at / rather than /dev/sda1 as I'd expect. If I try to remount with mount -a I get mount: none already mounted or /sys busy mount: according to mtab, sysfs is already mounted on /sys Edit 2: I resolved the problem with mount -a (the same error was occuring during startup, it turned out) by changing the sysfs and proc lines to proc /proc proc [...] sysfs /sys sysfs [...] Now mount -a doesn't complain, but it doesn't result in a read-write root partition. mount -o remount / does cause the root partition to be remounted, however.

  Read the article

• SSD causing 100% CPU usage in Apache/PHP

  - by Tim Reynolds

  I wanted to increase the performance on my development laptop so I added an Intel 320 Series SSD as my primary drive. Everything is amazingly fast, as expected, except Apache/PHP. I develop Magento by using an Ubuntu 10.10 virtual machine. Information: Host OS: Win 7 Professional 64bit Guest OS: Ubuntu 10.10 32bit Processor: i7 Chipset QM55 SSD: Intel 320 Series 160gb 30% full HDD: Hitachi 320gb 50% full (in side bay using an adapter) Laptop: Lenovo T510 Using: Shared folders Apache Version: 2.2.16 PHP Version: 5.3.3-1 APC Version: 3.1.3p1 APC Memory: 128M Using tmpfs for cache, log, session directories in Magento In the VM running on the SSD (VM files and source files are on the same drive) loading a product page in the Admin takes on average 26.2 seconds and uses 100% CPU for nearly the entire time. In the VM running on the old HDD loading the same page takes on average 4.4 seconds. It mostly uses around 40-50% of the CPU while rendering the page. I have read this post: Performance issues when using SSD for a developer notebook (WAMP/LAMP stack)? It says to change some settings in the bios. I have turned any and all power management features off in the bios. I can't for the life of me understand why this would be happening.

  Read the article

• Relation between server_name in nginx sites-available, /etc/hosts file and A-records

  - by user2818584

  I have the following two server-blocks in my config-file in sites-available: server { listen 80; server_name www.mydomain.be; root /usr/share/nginx/html; index index.html index.htm; location / { try_files $uri $uri/ =404; } } server { listen 80; server_name sub.mydomain.be; root /usr/share/nginx/sub; index index.html index.htm; location / { try_files $uri $uri/ =404; } } I also created an A-record for both www.domain.be and sub.domain.be with the IP of my server as value. Yet, when I try to reload my nginx configuration with service nginx reload it fails. When I remove the second server-block, it reloads as expected. I know this topic is popular, and that there are loads of such [nginx][subdomain] questions here, but none of them seems to discuss explicitly how the following three things hang together: virtual hosts or server blocks in nginx (est. server_name matching) the effect of A-records on how nginx processes requests the need to add hosts to /etc/hosts Right now I have the impression that a lack of knowledge of this bigger picture, rather than specific knowledge of nginx configuration prevents me from making this work.

  Read the article

• with nginx having the base url rewrite to https

  - by jchysk

  I'd like only my base domain www.domain.com to be rewritten to https://www.domain.com By default in my https block I have it reroute to http:// if it's not ~uri = "/" (base domain) or static content. server { listen 443; set $ssltoggle 2; if ($uri ~ ^/(img|js|css|static)/) { set $ssltoggle 1; } if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle != 1) { rewrite ^(.*)$ http://$server_name$1 permanent; } } So in my http block I need to do the rewrite if it has to https: server { listen 80; if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle = 1) { rewrite ^(.*)$ https://$server_name$1 permanent; } } If I don't have the $uri = '/' if-statement in the http block, then https works fine if I go directly to it, but I won't get redirected if I go to regular http which is expected. If I do put that in-statement in the http block then everything stops working within minutes. It might work for a few requests, but will always stop within a minute or so. In browsers I just get a blank page for all requests. If I restart nginx it continues to not work until I remove both if-statement blocks in both the https and http blocks and restart nginx. When I look in the error logs I don't see anything logged. When I look in the access log I see this message: "-" 400 0 "-" "-" which I assume means a 400 error. I don't understand why this doesn't work for me. My end goal is to have the base domain be https-only while all other pages default to http. How can I achieve this?

  Read the article

• Transparent proxying in MacOS X 10.6 Snow Leopard (and maybe FreeBSD)

  - by apenwarr

  I'm trying to create a transparent proxy on my MacOS machine in order to port the sshuttle ssh-based transproxy VPN from Linux. I think I almost have it working, but sadly, almost is not 100%. Short version is this. In one window, start something that listens on port 12300: $ while :; do nc -l 12300; done Now enable proxying: # sysctl -w net.inet.ip.forwarding=1 # sysctl -w net.inet.ip.fw.enable=1 # ipfw add 1000 fwd 127.0.0.1,12300 log tcp from any to any And now test it out: $ telnet localhost 9999 # any port number will do # this works; type stuff and you'll see it in the nc window $ telnet google.com 80 # any host/port will do # this *doesn't* work! After the latter experiment, I see lines like this in netstat: $ netstat -tn | grep ^tcp4 tcp4 0 0 66.249.91.104.80 192.168.1.130.61072 SYN_RCVD tcp4 0 0 192.168.1.130.61072 66.249.91.104.80 SYN_SENT The second socket belongs to my telnet program; the first is more suspicious. SYN_RCVD implies that my SYN packet was correctly captured by the firewall and taken in by the kernel, but apparently the SYNACK was never sent back to telnet, because it's still in SYN_SENT. On the other hand, if I kill the nc server, I get this: $ telnet google.com 80 Trying 66.249.81.104... telnet: connect to address 66.249.81.104: Connection refused telnet: Unable to connect to remote host ...which is as expected: my proxy server isn't running, so ipfw redirects my connection to port 12300, which has nobody listening on it, ie. connection refused. My uname says this: $ uname -a Darwin mean.local 10.2.0 Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386 i386 Does anybody see any different results? (I'm especially interested in Snow Leopard vs Leopard results, as there seem to be some internet rumours that transproxy is broken in Snow Leopard version) Any advice for how to fix?

  Read the article

• How does one open multiple tabs in TextWrangler?

  - by Closure Cowboy

  No, I'm not bluffing. I really can't figure this out. The setup: I went to File -> Open, and then selected a directory rather than a file. As expected, a directory tree opened on the left side of my document. Hooray! I can easily view the files' structure in my Rails project. So, I make a few changes in a file, and then I click on a different file in the directory tree. My problem: TextWrangler then asks me whether I want to save my changes. Huh? I say "No", and the new document doesn't open at all. Great. I try hitting Command+N (new document). A new window opens. Ughhhh. How the heck do I open documents in a new tab? Note: I have set the "New & opened documents" behavior to "Open in the front window". This does not change the behavior described (i.e. when a directory is opened rather than a single file).

  Read the article

• Problems with bash script, mysql inserts and launchd

  - by Armands

  ========= I am developing a automated system, which consists of 3 parts: mysql, bash and launchd. Bash script takes folders of work related stuff, zips, archives and puts info about them into database that is located on a local MAMP server. Everything works as expected when I run the script from terminal. But when I use Launchd to automatically run this script, it functions without errors and it does not put the values into database. I've tried to make logs of returned messages, but the logs end up being empty as the command has run the way it was supposed to. Any help would be appreciated! .plist contents <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>com.adevo.ari.zip</string> <key>ProgramArguments</key> <array> <string>/Volumes/Archive-Plus/B-ARCHIVE-PLUS/ZZ_UTILITY_FOLDER/Compress.sh</string> </array> <key>Nice</key> <integer>1</integer> <key>StartInterval</key> <integer>120</integer> <key>RunAtLoad</key> <true/> </dict> </plist> I made this .plist file just by searching the web.

  Read the article

• IIS SSL is taking all IPs although it is told not to

  - by Martin Sall

  I have a testing system where IIS Express on Windows 7 SSL website has to live together with Cerberus FTP server SSL website (Cerberus FTP has a built-in web server for HTTP uploads). I have set up Windows to use two IPs from my router 192.168.1.128 (for IIS SSL Web Site, using a self-generated SSL certificate for now) 192.168.1.129 (for Cerberus FTP built-in SSL Web Site) In IIS I have set web site binding to use only the IP 192.168.1.128. But still when I launch Cerberus, it says - cannot bind 192.168.1.129:443. I tested in Firefox - indeed, when I go to 192.168.1.129 (or even localhost), I do not get “Unable to connect“ page as expected, but “The connection was reset” instead. IIS is still occupying those IPs, although it is not serving the website on those IPs. When I stop the IIS website, Cerberus FTP Website launches without problems. But then I cannot launch IIS web site, it tells - "The process cannot access the file because it is being used by another process". Why is IIS SSL web site still occupying all IPs?

  Read the article

• How come my Intel 520 180GB SSD performs extremely poorly?

  - by Willem

  I recently installed a new Intel 520 series 180GB SSD in my brand new MacBook Pro. The system is as follows: Model: MacBook Pro 15-inch, Late 2011 (MacBookPro8,2) Processor: 2.4 GHz Intel Core i7 Memory: 16 GB 1333 MHz DDR3 Graphics: AMD Radeon HD 6770M 1024 MB Software: Mac OS X Lion 10.7.3 Main Drive Bay: Intel 520-series 180GB SATA-3 (6GB/s negotiated link) SSD (Firmware: 400i) [80GB free] Optical Bay: Toshiba 5400 RPM 750GB SATA-2 HDD Trim: Enabled (according to Trim Enabler App) And here are the speeds I'm getting: Read: 412 MB/s Write: 186 MB/s What have I done wrong? Results expected: Read/write both 500MB/s I have seen benchmarks with lesser SSD:s (SATA-2 even) outperform my write-speeds by far. Also, Intel 520 SSD:s are supposed to be the top class of SSD:s. Trim Enabler report: This looks a bit odd compared to screenshots from their site: These is the defined S.M.A.R.T attributes (taken from Intel): And here are my S.M.A.R.T attributes read using smartctl tool from smartmontools: They don't seem very compatible. I'm going to try and look for a S.M.A.R.T attributes reader tool for OS X which might support Intel 520 series.

  Read the article

• Why I cannot copy install.wim from Windows 7 ISO to USB (in linux env)

  - by fastreload

  I need to make a USB bootable disk of Windows 7 ISO. My USB is formatted to NTFS, ISO is not corrupt. I can copy install.wim elsewhere but I cannot copy it to USB. I even tried rsync. rsync error sources/install.wim rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32) rsync: write failed on "/media/52E866F5450158A4/sources/install.wim": Input/output error (5) rsync error: error in file IO (code 11) at receiver.c(322) [receiver=3.0.8] Stat for windows.vim File: `X15-65732 (2)/sources/install.wim' Size: 2188587580 Blocks: 4274600 IO Block: 4096 regular file Device: 801h/2049d Inode: 671984 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ umur) Gid: ( 1000/ umur) Access: 2011-10-17 22:59:54.754619736 +0300 Modify: 2009-07-14 12:26:40.000000000 +0300 Change: 2011-10-17 22:55:47.327358410 +0300 fdisk -l Disk /dev/sdd: 8103 MB, 8103395328 bytes 196 heads, 32 sectors/track, 2523 cylinders, total 15826944 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdd1 * 32 15826943 7913456 7 HPFS/NTFS/exFAT hdparm -I /dev/sdd: SG_IO: bad/missing sense data, sb[]: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ATA device, with non-removable media Model Number: UF?F?A????U]r???U u??tF?f?`~ Serial Number: ?@??~| Firmware Revision: ????V? Media Serial Num: $I?vnladip raititnot baelErrrol aoidgn Media Manufacturer: o eparitgns syetmiM Standards: Used: unknown (minor revision code 0x0c75) Supported: 12 8 6 Likely used: 12 Configuration: Logical max current cylinders 17218 0 heads 0 0 sectors/track 128 0 -- Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 0 MBytes device size with M = 1000*1000: 0 MBytes cache/buffer size = unknown Capabilities: IORDY(may be)(cannot be disabled) Queue depth: 11 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 0 Current = ? Recommended acoustic management value: 254, current value: 62 DMA: not supported PIO: unknown * reserved 69[0] * reserved 69[1] * reserved 69[3] * reserved 69[4] * reserved 69[7] Security: Master password revision code = 60253 not supported not enabled not locked not frozen not expired: security count not supported: enhanced erase 71112min for SECURITY ERASE UNIT. 172min for ENHANCED SECURITY ERASE UNIT. Integrity word not set (found 0xaa55, expected 0x80a5)

  Read the article

• Deploying Windows Service through group policy fails with Event ID 102

  - by Sören Kuklau

  I'm trying to deploy a custom Windows Service (written in C#; installed through a VS setup project) using a group policy. To help debug this, I also have two additional MSIs in the same policy. All three packages are deployed as a machine policy, not a user one. On one machine (runs Windows Server 2008; no UAC), all three deploy fine. The service is set to Automatic, as expected. On two machines (run Windows 7; UAC), the two other MSIs deploy fine, but my service fails to install. The event log gives an event ID of 102, which appears to be a permissions problem: The install of application "Package Name" from policy "Policy Name" failed. The error was The installation source for this product is not available. Verify that the source exists and that you can access it. However, all three packages come from the same share linked through UNC, so this is unlikely. My guess is that UAC is the problem; that the service requires additional permissions. Do I need to alter the MSI somehow?

  Read the article

< Previous Page | 787 788 789 790 791 792 793 794 795 796 797 798  | Next Page >