Search Results

Search found 22480 results on 900 pages for 'internet archive'.

Page 798/900 | < Previous Page | 794 795 796 797 798 799 800 801 802 803 804 805  | Next Page >

• Sonicwall TZ210 - Set up public wifi on separate subnet & interface

  - by thomasjbarrett

  I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

  Read the article

• Rsyslogd not listening on port

  - by amorfis

  I installed rsyslogd on ubuntu server, started it and everything looks fine, but the port the server should listen on is not opened. ubuntu@node7:~$ sudo service rsyslog restart rsyslog stop/waiting rsyslog start/running, process 14114 Netstat shows it is not listening: ubuntu@node7:~$ netstat -tlan Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 320 172.22.0.17:22 10.8.8.38:61335 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 :::2776 :::* LISTEN tcp6 0 0 :::2777 :::* LISTEN tcp6 0 0 172.22.0.17:2777 172.22.0.11:56554 ESTABLISHED tcp6 0 0 172.22.0.17:2776 172.22.0.11:39780 ESTABLISHED This is how /etc/rsyslog.conf looks like (most comments omitted): ubuntu@node7:~$ cat /etc/rsyslog.conf ################# #### MODULES #### ################# $ModLoad imuxsock # provides support for local system logging $ModLoad imklog # provides kernel logging support (previously done by rklogd) $ModLoad imtcp $InputTCPServerRun 514 ########################### #### GLOBAL DIRECTIVES #### ########################### $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $RepeatedMsgReduction on $WorkDirectory /var/spool/rsyslog $FileOwner syslog $FileGroup adm $FileCreateMode 0640 $DirCreateMode 0755 $Umask 0022 $PrivDropToUser syslog $PrivDropToGroup adm $IncludeConfig /etc/rsyslog.d/*.conf In /etc/rsyslog.d/35-server-per-host.conf I have following lines, and I suspect this can be the cause. What does it mean? # Stop processing of all non-local messages. You can process remote messages # on levels less than 35. :fromhost-ip,!isequal,"127.0.0.1" ~ and if it is, how could I change it to have server listening and receiving and logging messages? UPDATE: I commented out suspected line, but still it's not listening on port 514

  Read the article

• Google: "302 Moved" in Firefox

  - by Virtlink

  For some Google search queries executed from the Firefox search bar, or manually by typing in the URL, I get a ''302 Moved'' page. I did a quick virus scan, have checked the hosts file and the plugins and add-ons that are installed in Firefox. Nothing is out of the ordinary. What could be the problem? These URLs (and any URL with google.com, empty and firefox-a in them) show me a 302 Moved page: https://www.google.com/search?q=c%23+empty+array&client=firefox-a https://www.google.com/search?q=empty&client=firefox-a Whereas these URLs work fine: https://www.google.com/search?q=c%23+empty+array (no firefox-a) https://www.google.com/search?q=empty (no firefox-a) https://www.google.com/search?q=c%23+array&client=firefox-a (no empty) https://www.google.nl/search?q=c%23+empty+array&client=firefox-a (no .com) By default Google redirects my queries to their .nl website, and uses HTTPS. I am currently executing a full system virus scan using Security Essentials. My Firefox plugins were up-to-date. No unfamiliar Firefox plugins or add-ons found. Restarting Firefox did not solve the issue. The issue does not occur in Internet Explorer. The hosts file did not contain any unfamiliar entries.

  Read the article

• Continuous outbound connection from QNAP NAS

  - by user192702

  I notice on my firewall that my QNAP NAS is continuously sending UDP sessions out to the Internet. Every second I have 5 - 7 connections out to addresses like the following: 2013-11-10 23:17:54 Deny 192.168.60.5 93.215.212.162 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 87.76.0.83 29872/udp 6881 29872 2013-11-10 23:18:05 Deny 192.168.60.5 5.164.188.224 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 80.61.45.206 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 37.117.204.129 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 71.67.101.30 51413/udp 6881 51413 2013-11-10 23:18:34 Deny 192.168.60.5 89.28.92.191 8621/udp 6881 8621 2013-11-10 23:18:34 Deny 192.168.60.5 94.244.157.85 28221/udp 6881 28221 2013-11-10 23:18:34 Deny 192.168.60.5 213.241.61.240 9089/udp 6881 9089 2013-11-10 23:18:45 Deny 192.168.60.5 88.163.28.100 52721/udp 6881 52721 2013-11-10 23:18:45 Deny 192.168.60.5 37.55.190.20 10027/udp 6881 10027 2013-11-10 23:18:45 Deny 192.168.60.5 62.72.188.146 14306/udp 6881 14306 2013-11-10 23:19:14 Deny 192.168.60.5 85.53.244.205 51413/udp 6881 51413 2013-11-10 23:19:14 Deny 192.168.60.5 67.163.18.215 52130/udp 6881 52130 2013-11-10 23:19:14 Deny 192.168.60.5 86.172.105.140 9089/udp 6881 9089 2013-11-10 23:19:14 Deny 192.168.60.5 99.28.56.121 52383/udp 6881 52383 2013-11-10 23:19:14 Deny 192.168.60.5 109.60.184.249 46217/udp 6881 46217 2013-11-10 23:19:25 Deny 192.168.60.5 121.107.144.174 21135/udp 6881 21135 2013-11-10 23:19:25 Deny 192.168.60.5 84.39.116.180 48446/udp 6881 48446 2013-11-10 23:19:25 Deny 192.168.60.5 183.238.254.62 openvpn/udp 6881 1194 ......... This is frightening as it seems like it's been hacked to send information out. Has anyone observed this behaviour from their QNAP NAS?

  Read the article

• Outlook 2007 will not send/receive using RPC over HTTP to an exchange server.. works for other users

  - by bob franklin smith harriet

  I have an incredibly frustrating user issue that I have been unable to resolve for over a week, any ideas for this would be greatly appreciated. The user is having troubles using Outlook 2007 to send or receive emails over using RPC over HTTP (Outlook Anywhere) to an exchange server. Basically what happens, the connection will be establised and the user will be prompted for the username and password, those are submitted and then outlook tries to download emails which fails and the connection to the exchange server will remain unavailable. The machine can ping and everything to the exchange server there is no connection issue there. The setup worked fine for him up untill now and also works for possibly hundreds of other users using the exact same settings, also the same settings will work from the users iphone on the same internet connection, and from my own system using outlook. The exchange server has the webmail https feature and that can be logged into and send and receive emails fine. Steps taken so far: removing the .ost file for the account and allowing office to rebuild it (fixes the issue for a short period of time, then the same symptons occur) deleted exchange profile and recreated (no change in issue) uninstalled all antivirus and firewalls (no change in issue) removed all cached passwords (keymgr.dll) (no change in issue) removed all entries from the hosts file (no change in issue) uninstalled and reinstalled office 2007 (Temporary fix of issue) Installing Symantec Endpoint Client caused a lot of email scan popups to be displayed, after a reboot this stopped and a scan it picked a few trojans that it removed. This fixed the issue temporarily as well, the issue is back again now. I am completely out of ideas now, there seems to be nothing that can be done to fix this issue outside of rebuilding the PC which is a massive pandoras box I don't want to enter with this user. --- Update ---- Malware scans from multiple products have been run on the machine and all updates were installed. The real problem with this user is his distance from us, there is no way to supply a spare laptop or rebuild the machine currently.

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• Xp SP3 - Non-Functioning

  - by Josh

  Ok Here is a crazy problem, I have a HP dv6000 Laptop that can no longer hold a charge, so I hooked it up to my TV, bought a wireless mouse and keyboard and configured xp to run with the lid closed, It has medium to heavy usage mainly just streaming from sites like Netfilx, Hulu, ABC, etc. And playing movies I ripped of dvd. It ran fine for a while but recently it has been having some weird problems: Problem one: I used to use firefox but now when run it I can type but as soon as I click something it just shuts down, completely, I can't even close it unless I use taskmanager to do it. So I went and got google chrome which is better but still hit or miss, but never completely shuts down, I just can't click anything or type anything, or sometimes I just can't type anything or vice versa. Also when I open a new tab, and try to move back to my old one, it automatically closes the old tab when I click on it. Problem two: When using the internet I can't use any other application or anything windows (ie. Windows explorer) until I force quit all browsers with taskmanger. The reason I can't run anything is because I can't click on it. Problem three: When I try to play a movie (with vlc) Once it starts playing I can't click on anything, but I can use hotkeys, and once it stops everything is fine again. Well I hope somebody knows whats going on because I have no clue, If you need clarification or more info on something I would be happy to provide it...

  Read the article

• Networking - intermittent, slow speeds

  - by jack

  Hi all I'm a novice when it comes to networking. I live in a large two storey building that used to be a school and we have an internet connection with BT (british telecoms provider), the connection speed is 12Mb.. Basically our connection is slow and very intermittent and I was wondering if anybody here could provide some help or ideas. There are about 11 people in the building who could be online at any time. We have a router on the ground floor which is bog standard supplied by BT. To provide Broadband access to the 1st and 2nd floors, we used an old switch that the school left, we have a cable running from the router on the first floor to the switch which connects to a wireless router which is configured as a bridge on the 2nd floor supplying broadband access to the 1st and 2nd floors. Additionally we have 3 computers that are connected via the switch through the ethernet sockets left by the school on the ground floor. The router we use on the 2nd floor came in a pack of 2 and cost about £15 (bought by another person). Sometimes the connection is perfectly fine, i.e. early hours of the morning or when everybody is out, we have rang BT who say that the connection cannot cope with the numbers of people online, plus I'm not sure whether each person is streaming etc. Can anybody offer any advice?

  Read the article

• debian VM refusing all traffic apart from http

  - by james lewis

  I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

  Read the article

• Cannot find "IIS APPPOOL\{application pool name}" user account in Windows Server 2008

  - by MacGyver

  Normally when setting up IIS 7, I'm used to allowing permissions to user IIS APPPOOL\{application pool name} on the root folder of my web application(s). I also give permissions to IUSR (or the IIS_IUSRS user group. (Note, in Windows Server 2008, I found that IUSR isn't in that group by default, so I added it). In Windows Server 2008, I cannot find user IIS APPPOOL\{application pool name} under Security under the Windows Folder Properties. I'm using Windows Authentication in ASP.NET. I'm receiving a 401.1 on the page in Internet Explorer 8 after getting the authentication prompt. Mozilla Firefox also gave me a Windows authentication prompt, and got me into the site fine. Same with Google Chrome. How can I solve this one? HTTP Error 401.1 - Unauthorized You do not have permission to view this directory or page using the credentials that you supplied. Specific page information: Module: WindowsAuthenticationModule Notification: AuthenticateRequest Handler: PageHandlerFactory-ISAPI-4.0_32bit Error Code: 0x8009030e Requested URL: http://.....aspx Physical Path: C:\.........aspx Logon Method: Not yet determined Logon User: Not yet determined

  Read the article

• Users database empty after Samba3 to Samba4 migration on different servers

  - by ouzmoutous

  I have to migrate a Samba 3 to a new Samba 4 server. My problem is that the database on the samba 3 server seems a bit empty. The secrets.dtb file is only 20K whereas the “pbedit -L |wc -l”command give me 16970 lines. On my Samba3 /var/lib/samba is 1,5M After I had migrate the databse (following instructions on http://dev.tranquil.it/index.php/SAMBA_-_Migration_Samba3_Samba4), “pdbedit -L” command on the new server give me only : SAMBA4$, Administrator, dns-samba4, krbtgt and nobody. So I tried to create a VM with a Samba3. I added some users, done the same things I did for the migration and now I can see the users created on the VM. It’s like users on the Samba 3 server are in a sort of cache. I already migrate the /etc/{passwd,shadow,group} files and I can see users with the “getent passwd” command. Any ideas why my users are present when I use pdbedit but the database is so empty ? The global part of my smb.conf on the Samba 3 server : [global] workgroup = INTERNET netbios name = PDC-SMB3 server string = %h server interfaces = eth0 obey pam restrictions = Yes passdb backend = smbpasswd passwd program = /usr/bin/passwd %u passwd chat = *new* %n\n *Re* %n\n *pa* username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%U max log size = 1000 socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 add user script = /usr/sbin/useradd -s /bin/false -m '%u' -g users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null '%u' -g machines logon script = logon.cmd logon home = \\$L\%U domain logons = Yes os level = 255 preferred master = Yes local master = Yes domain master = Yes dns proxy = No ldap ssl = no panic action = /usr/share/samba/panic-action %d invalid users = root admin users = admin, root, administrateur log level = 2

  Read the article

• Computer Comparison - which is "better"

  - by David Murdoch

  A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

  Read the article

• Static Network configuration with bridge in CentOS 6.2

  - by Kyle

  I have a server with CentOS 6.2 installed, I want to use it as a VM host to run some windows installations for development purposes. I wanted to be able to directly RDP and serve websites from IIS on these windows server installations, so I figured I would set it up as bridged networking. I have been struggling with this all morning, usually the result being that when I brought up the bridge interface all network connectivity to the CentOS would go away, however, I think I finally have that all figured out. However, here's what happens. The eth0 and br0 interfaces are defined in /etc/sysconfig/network-scripts with ifcfg-eth0 and ifcfg-br0. I DO NOT have ifup or ifdown or any other files for these interfaces, I have not found if they are needed. I can login and use firefox to browse the web, however, running ifconfig reveals that my eth0 does not have an IPAddress, but the br0 does. I can actually RDP into the Windows installation, and browse the internet from there as well, but I cannot directly connect(via putty, vnc, nor viewing web pages) to the CentOS box. Any idea what's up? ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=192.168.1.20 GATEWAY=192.168.1.1 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes BRIDGE=br0 ifcfg-br0 DEVICE=br0 TYPE=Bridge BOOTPROTO=static DNS1=192.168.1.1 DNS2=8.8.8.8 GATEWAY=192.168.1.1 IPADDR=192.168.1.2 NETMAS=255.255.255.0 ONBOOT=yes I know some of the options are inconsistent (DNS and BOOTPROTO) because I tried changing those in the eth0 file to make it work, and the changes haven't adversly affected web browsing or the other functionality Thank you!

  Read the article

• Virtualization and best hardware sharing scenario for me

  - by azera

  Hello, Following this thread on super user, I now want to start installing all my vm on the hardware. As a remainder, i have a (powerful enough) server on which i want to install 3 OS: there is a debian (general dev testbed purposes), an ipcop (network control/firewall) and a freenas (local network file sharing). I'm wondering which scenario would be the best for me and if I will be able to share the hardware to do what i want; either a - install an hypervisor like the free vmware esx and all three vms in it, or b - install debian, and the other two running inside it with virtual box My need being that: the ipcop should handle all network traffic to the internet, meaning all traffic from my main computer but also all traffic from the other two vm the freenas shares should be accessible from the other two vm and my main computer too i don't really care about the debian access, i only need to access it from my main computer, not the other vms Will I need to install additionnal network cards for each vm or can they all share the same one happily ? (right now I have two, one linking the server to my router [which only ipcop is gonna use] and one linking it to my switch [which i would like all three to use]) As for harddrives, I was going to use 1 harddrive cut in 3 partitions to install all three OSes, then add to that the freenas drives, will it be correct ? Thanks a lot for anyone who can help me, this is kind of a vast area and I'm not sure which way to go at all

  Read the article

• SSH through standard Belkin router to Asus Tomato router

  - by Luke

  I've set up SSH on the Tomato firmware on an Asus N10, via port 22 with key authentication. I've tested the keys by connecting with putty directly to the router when connected to its network. That works OK. But this router is behind a Belkin (F5D7632-4) router which also acts as modem and when I try to connect through with the (dynamic) public IP it times out. I'm guessing it's something to do with the NAT? My putty settings are taken from various online tutorials, but it's set up for port 22, with the correct key as mentioned. The Belkin router has port forwarding to the Asus (192.168.2.3) for port 22 TCP and UDP set up. It's now tough to see what to do in order to connect to the Asus router with an external IP - if it's even possible. Ideally I would have liked to have only needed to use the Asus router, but as it doesn't act as a modem, I need to connect it to the Belkin to use Tomato's features. Perhaps there's a solution here too? Network: Internet -> Belkin modem/router -> Asus router (Tomato SSH) -> Devices

  Read the article

• No OS will boot, all freeze

  - by Gyan

  This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

  Read the article

• Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

  - by Dean Hill

  I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• Iptables Forwarding problem

  - by ankit

  Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

  Read the article

• Host spreads wrong MAC Adress of router on the WIFI

  - by JavaIsMyIsland

  Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• Stream video from a computer to a tablet

  - by NullOrEmpty

  I would like to watch presentations and college videos I have on my computer, from my tablet. There are almost a hundred of GB in videos, so I would like to watch them in streaming from my computer. My wife has also tons of videos so I have decided to do a kind of streaming local service to watch the videos from our tablets. I have found an article about how to do it with Internet Information Server, but the article is relaying in an application that is not free (Expression Encoder). Since this is for home fun, I am not willing to pay, so I would like to ask for some free encoder that can do the trick. I have no idea about streaming. Actually, I tried to hang the files directly on IIS, and the browser tried first to download some of them and some other (mp4?) got played badly, so I could not get a smooth video experience. What is missing? What is the deal with H.264 ? Can I roll with VC-1 and play videos in my Android tablet with streaming with an acceptable quality through my WLAN home network? Any better solution? Thanks.

  Read the article

• Microsoft , Hotmail , Live , MSN, Outlook , unable to send emails and no support received from microsoft in 3 months we are trying asking for that

  - by bombastic

  Ok this is somenthing unbelievable, we have a website, users sign up and receives links to confirm they signed up BUT: 1 - microsoft blocked our IP (no one with microsoft email account can receive our emails) 2 - we tryed contacting microsoft submitting the detailed form about our problem 3 - we posted 3 times in their community about our problem 4 - we tweeted they about our problem 5 - we tryed finding out some telephone support number (the few there are arent' helping at all) Do you think we solved? the answer is NO :/ We still unable to send emails from our IP to microsoft email accounts, since 3 months back. Our emails are perfect we checked all the email headers following microsoft guidelines but it seems not enought, checking our IP reputation it seems everythings ok, indeed we can send email easly to any other provider , gmail, yahoo, etc Do you know any other way to try to get help ? FULL STACK ERROR FROM MICROSOFT: host mx1.hotmail.com[65.55.37.120] said: 550 SC-001 (COL0-MC4-F28) Unfortunately, messages from 94.23.***** weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command) We are running a Virtual Private Server , so no HOSTING SITE, using NGINX too

  Read the article

• How to send T.38 from a mac?

  - by Brian Postow

  I'm trying to set up a fax-server on a macintosh. I have Hylafax, and we're going to use an internet FOIP fax provider (Haven't decided who yet, that may be another question). The problem is how to get from Hylafax to T.38. I know of two options, but I'm not sure how to decide between them: T38modem Advantages: It's only one extra program, and i know that I can compile it for the Mac. (well, At least I can get the H323 version working on a Mac) Disadvantages: It is mostly undocumented and seems to be supported only by one guy in Russia. IAXModem/Asterisk Advantages: It's well known, and well supported. We can pay for support. It presumably does the T38 with SIP correctly, so we don't have to worry about it. Disadvantages: It's two separate programs. While I know how to get Asterisk on a mac, I'm not sure about IAXModem. (It's sourceforge, and linux, but compiling things for a mac isn't always straight forward...) It's also mostly undocumented. Do these seem like an accurate listing of the pros/cons? Anyone have any other suggestions? thanks.

  Read the article

• How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

  - by Rahul Narain

  I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

  Read the article

< Previous Page | 794 795 796 797 798 799 800 801 802 803 804 805  | Next Page >