Search Results

Search found 22480 results on 900 pages for 'internet archive'.

Page 799/900 | < Previous Page | 795 796 797 798 799 800 801 802 803 804 805 806  | Next Page >

• Adding a Second Wireless Router to an Existing Wired Network

  - by KVCrawford

  I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

  Read the article

• Iptables Forwarding problem

  - by ankit

  Hi all, I had initally asked question about sertting up my linux box for natting for my home network and was given suggestions in the thread here. Did not want to clutter the old question so starting a new one here. based on the earlier suggestions, i have come up with the following rules ... :PREROUTING ACCEPT [1:48] :OUTPUT ACCEPT [12:860] :POSTROUTING ACCEPT [3:228] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT *filter :INPUT DROP [3:228] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p icmp -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -p icmp -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT -A FORWARD -i eth1 -p tcp -m tcp --dport 443 -j ACCEPT -A OUTPUT -p icmp -j ACCEPT -A OUTPUT -j ACCEPT COMMIT If you notice, i do have the proper MASQURADING rule and the proper FORWARD filter rule as well. However i am facing 2 problems On the linux box itself DNS resolving is not working the lan clients connected to the linux box, are still not able to get to internet. when i ping something from them, i see the DROP count in iptables INPUT rule increasing. now my question is, when i am pinging something from the lan client, how come it is being matched by the input chain ?! should it be in the forward chain ? Chain INPUT (policy DROP 20 packets, 2314 bytes) pkts bytes target prot opt in out source destination 99 9891 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- eth0 any anywhere anywhere 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:https 122 9092 ACCEPT tcp -- eth0 any anywhere anywhere tcp dpt:ssh Thanks ankit

  Read the article

• Windows 7 x64 wired connection problem. IP, gateway, dns assigned, can't ping. Network detected as "Network"

  - by Emil Lerch

  I am having a problem connecting to a specific wired network with my Latitude E6410 laptop. Other wired networks seem to work fine, but this one does not. I have a coworker with me with the same Intel 82577LM Gigabit Network card, and he can connect just fine. I've updated to the latest Intel drivers (11.8.75.0) and am not using Pro Set. I obtain all DHCP information just fine (IP, netmask, DNS server, default gateway). I cannot ping anything (internal or on the Internet - I tried pinging Google's public DNS servers by IP 8.8.8.8), nor can I get answers to any DNS queries through NS Lookup. Windows troubleshooting says everything is fine, but I can't get DNS responses. I've seen issues like this in the past that were related to link speed/duplex autonegotiaion failures, so I've tried manually setting link speed/duplex to all values one by one with no success. My coworker is using all default settings, so he is just using autonegotiate. Any ideas of other things to try?

  Read the article

• Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

  - by Damainman

  I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

  Read the article

• Continuous outbound connection from QNAP NAS

  - by user192702

  I notice on my firewall that my QNAP NAS is continuously sending UDP sessions out to the Internet. Every second I have 5 - 7 connections out to addresses like the following: 2013-11-10 23:17:54 Deny 192.168.60.5 93.215.212.162 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 87.76.0.83 29872/udp 6881 29872 2013-11-10 23:18:05 Deny 192.168.60.5 5.164.188.224 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 80.61.45.206 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 37.117.204.129 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 71.67.101.30 51413/udp 6881 51413 2013-11-10 23:18:34 Deny 192.168.60.5 89.28.92.191 8621/udp 6881 8621 2013-11-10 23:18:34 Deny 192.168.60.5 94.244.157.85 28221/udp 6881 28221 2013-11-10 23:18:34 Deny 192.168.60.5 213.241.61.240 9089/udp 6881 9089 2013-11-10 23:18:45 Deny 192.168.60.5 88.163.28.100 52721/udp 6881 52721 2013-11-10 23:18:45 Deny 192.168.60.5 37.55.190.20 10027/udp 6881 10027 2013-11-10 23:18:45 Deny 192.168.60.5 62.72.188.146 14306/udp 6881 14306 2013-11-10 23:19:14 Deny 192.168.60.5 85.53.244.205 51413/udp 6881 51413 2013-11-10 23:19:14 Deny 192.168.60.5 67.163.18.215 52130/udp 6881 52130 2013-11-10 23:19:14 Deny 192.168.60.5 86.172.105.140 9089/udp 6881 9089 2013-11-10 23:19:14 Deny 192.168.60.5 99.28.56.121 52383/udp 6881 52383 2013-11-10 23:19:14 Deny 192.168.60.5 109.60.184.249 46217/udp 6881 46217 2013-11-10 23:19:25 Deny 192.168.60.5 121.107.144.174 21135/udp 6881 21135 2013-11-10 23:19:25 Deny 192.168.60.5 84.39.116.180 48446/udp 6881 48446 2013-11-10 23:19:25 Deny 192.168.60.5 183.238.254.62 openvpn/udp 6881 1194 ......... This is frightening as it seems like it's been hacked to send information out. Has anyone observed this behaviour from their QNAP NAS?

  Read the article

• Stream video from a computer to a tablet

  - by NullOrEmpty

  I would like to watch presentations and college videos I have on my computer, from my tablet. There are almost a hundred of GB in videos, so I would like to watch them in streaming from my computer. My wife has also tons of videos so I have decided to do a kind of streaming local service to watch the videos from our tablets. I have found an article about how to do it with Internet Information Server, but the article is relaying in an application that is not free (Expression Encoder). Since this is for home fun, I am not willing to pay, so I would like to ask for some free encoder that can do the trick. I have no idea about streaming. Actually, I tried to hang the files directly on IIS, and the browser tried first to download some of them and some other (mp4?) got played badly, so I could not get a smooth video experience. What is missing? What is the deal with H.264 ? Can I roll with VC-1 and play videos in my Android tablet with streaming with an acceptable quality through my WLAN home network? Any better solution? Thanks.

  Read the article

• OpenVPN, install a TAP adapter

  - by GolezTrol

  When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

  Read the article

• Opening an existing process

  - by Grasper

  I am using Eclipse in Linux through a remote connection (xrdp). My internet got disconnected, so I got disconnected from the server while eclipse was running. Now I logged in again, and I do the "top" command I can see that eclipse is running and still under my user name. Is there some way I can bring that process back into my view (I do not want to kill it because I am in the middle of checking in a large swath of code)? It doesnt show up on the bottom panel after I logged in again. Here is the "top" output: /home/mclouti% top top - 08:32:31 up 43 days, 13:06, 29 users, load average: 0.56, 0.79, 0.82 Tasks: 447 total, 1 running, 446 sleeping, 0 stopped, 0 zombie Cpu(s): 6.0%us, 0.7%sy, 0.0%ni, 92.1%id, 1.1%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 3107364k total, 2975852k used, 131512k free, 35756k buffers Swap: 2031608k total, 59860k used, 1971748k free, 817816k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13415 mclouti 15 0 964m 333m 31m S 21.2 11.0 83:12.96 eclipse 16040 mclouti 15 0 2608 1348 888 R 0.7 0.0 0:00.12 top 31395 mclouti 15 0 29072 20m 8524 S 0.7 0.7 611:08.08 Xvnc 2583 root 20 0 898m 2652 1056 S 0.3 0.1 139:26.82 automount 28990 postgres 15 0 13564 868 304 S 0.3 0.0 26:33.36 postgres 28995 postgres 16 0 13808 1248 300 S 0.3 0.0 6:54.95 postgres 31440 mclouti 15 0 3072 1592 1036 S 0.3 0.1 6:01.54 gam_server 1 root 15 0 2072 524 496 S 0.0 0.0 0:03.00 init 2 root RT -5 0 0 0 S 0.0 0.0 0:04.53 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:01.72 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:04.33 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/2

  Read the article

• Multiple Set Peer for VPN Failover

  - by Kyle Brandt

  I will have two Cisco routers at Location A serving the same internal networks, and one router in location B. Currently, I have one router in each location with a IPSec site-to-site tunnel connecting them. It looks something like: Location A: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 set transform-set ESP-3DES-SHA match address internal-ips Can I achieve fail over by simply adding another set peer at location B?: Location A (New secondary Router, configuration on previous router stays the same): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B (Configuration Changed): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 ! 11.11.11.100 is the ip of the new second router at location A set peer 11.11.11.100 set transform-set ESP-3DES-SHA match address internal-ips Cisco Says: For crypto map entries created with the crypto map map-name seq-num ipsec-isakmp command, you can specify multiple peers by repeating this command. The peer that packets are actually sent to is determined by the last peer that the router heard from (received either traffic or a negotiation request from) for a given data flow. If the attempt fails with the first peer, Internet Key Exchange (IKE) tries the next peer on the crypto map list. But I don't fully understand that in the context of a failover scenerio (One of the routers as Location A blowing up).

  Read the article

• Architecture for highly available MySQL with automatic failover in physically diverse locations

  - by Warner

  I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

  Read the article

• Dynamic fowarding with SOCKS5 proxy [on hold]

  - by bh3244

  I'm building my own SOCKS5 client and HTTP library and am having trouble figuring out how things work with dynamic port forwarding. So far I can connect successfully with my SOCKS5 client, but from there on I am stuck. I am using the ssh -D command. Considering I have my local machine "home" and my server "server" and I wanted to use "server" as proxy for all connections I understand I would type ssh -D "localport" "serverhostname" on my local machine "home". This command I understand has ssh accept connections with the SOCKS5 protocol. So now if I want to connect to google.com(74.125.224.72:80) and issue a GET for the front page, I assume I would send the SOCKS5 client request and the server would respond back with a 0x00 "succeeded" and from then on I am connected and I would send the HTTP GET request and the server would respond back accordingly with the data. Now if I want to navigate to a different website, must I issue another SOCKS5 connection request for that sites IP/hostname? I'm confused if this is the way it is done, or if there is a program listening on the local port of the "server" and handling outgoing and incoming data. To reiterate: Do SOCKS5 proxies work by sending repeated SOCKS5 connection requests for different addresses or is there just one connection to a local port on "server" and another program on "server" handles the outgoing connection to the internet by using that local port to send and receive data to/from "home"?

  Read the article

• Changing default openVPN IP in linux server

  - by Lamboo

  The problem is that we have a public OpenVPN service. Pay €9.95 and you get an OpenVPN account at currently half a dozen of servers for a month. This means there are always and will always be some people who create a certain amount of abuse or trouble. On the long run, the external IP every OpenVPN user gets assigned is prohibited from editing Wikipedia, it might be banned by e-gold and on some popular webforums, one-click-hosters, etc. Not a pleasant experience for the 97% of our customers who use our service responsibly and legitimately to regain their privacy. So even if I could change the assigned external IP every few months; e. g. from 216.xx.xx.164 to 216.xx.xx.170, it would help us a lot to combat this abuse and to provide our paying clients with "fresh" IP addresses that aren't banned or restricted on some popular Internet sites and services, yet. Does anybody know how to change the first IP address assigned to the public interface in CentOS? So that e.g. OpenVPN in future doesn't give our OpenVPN clients the external IP 123.xx.xx.164 but rather 123.xx.xx.170?

  Read the article

• How do I configure custom URL handlers on OS X?

  - by cwd

  I've been reading a lot online about custom URL handlers / custom protocol handlers such as: Launching External Applications using Custom Protocols under OSX OS X URL handler to open links to local files I get that you can tell the system that a particular program is able to handle a certain scheme / protocol with the Info.plist file: <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleURLName</key> <string>Local File</string> <key>CFBundleURLSchemes</key> <array> <string>local</string> </array> </dict> </array> <key>NSUIElement</key> <true/> But if there are multiple applications that are capable of opening the same URL handler, such as mailto: how do you specify which one you want the system to use? There were some references to utilities like the More Internet preference pane which no longer seems to be available from the author's site. I did find it online by Googling but it seems a bit shaky - like it was written for an older OSX - perhaps Tiger. I haven't been able to find information on how to set the URL handler for protocols and custom protocols. I'm assuming there is a plist file somewhere that I can edit - or maybe there is a newer, better utility that works well with Mountain Lion?

  Read the article

• Exchange 2007 relay from sendmail, message "Undelivered". Possible reasons?

  - by garlicman

  Note: This is my re-post from Stackoverflow. I've been messing with a test environment for security purposes where a DMZ RHEL5 sendmail server is used as a relay for an Exchange 2007 server. Exchange is working in the environment, I have Vista and XP VMs using Outlook on the Domain to send e-mail to each other. I've been trying to simulate an external internet VM sending an e-mail to the DMZ sendmail relay, which forwards to the Exchange server. Before everyone thinks this is too big a problem/question, I've followed the sendmail/Exchange guides and all I want to know is how I can determine why a relayed message/e-mail in Exchange is "Undelivered". Basically I send a SMTP message to the sendmail server, which relayed to my Exchange. The /var/log/maillog shows the e-mail being relayed to Exchange. Nov 17 13:41:22 externalmailserver sendmail[9017]: pAHIfMuW009017: from=<[email protected]>, size=1233, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=[10.50.50.1] Nov 17 13:42:17 externalmailserver sendmail[9050]: pAHIfMuW009017: to=<[email protected]>, delay=00:00:55, xdelay=00:00:36, mailer=relay, pri=121233, relay=mailserver.xyz.local. [192.168.1.20], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) This is good, but the To never receives the e-mail from Exchange. So I started poking around Exchange. In the "Message Tracking" Troubleshooting Assistant I queried the processed messages and found this: (I had to copy and paste the cells... sorry for the format) 2011/11/17 RECEIVE SMTP <[email protected]> "Undelivered Mail Returned to Sender" [email protected] [email protected] 192.168.100.10 MAILSERVER\DMZ Relay [email protected] I just want to know if anyone has any suggestions on why the DMZ Relay Connector I setup isn't relaying and is instead returning the forwarded e-mail to sender as Undelivered? My Exchange Relay Receive Connector is pretty simple. The Exchange server's FQDN is set as the HELO response, all available IP addresses can receive relayed e-mail, and the IP address of my sendmail server is specifically set as a remote server.

  Read the article

• Host spreads wrong MAC Adress of router on the WIFI

  - by JavaIsMyIsland

  Strange things are going on our network. Since yesterday a host which is actually not on our subnet spreads wrong ARP Replys on our network. To be precise, only on the WIFI. If I connect my Laptop to the cable ethernet, it gets the right MAC adress of the router. Also my Android phone and my Ubuntu system do get the right MAC Adress. So I took a look at wireshark. When I clear the ARP cache of the windows machine, the first ARP response is correct and comes from the router. But like 10 ms later another ARP response comes from another host in the WIFI. The host changes its IP Adresses from time to time and they look like they are not on our subnet. So I can not use the internet because DNS is not working anymore. Sometimes the router wins the race condition and the mac adress is set correctly in the arp cache. I first thought, this is an arp-poisoning mitm attack but it does not make sense if the packets get not routed correctly?! I restarted the router but it didn't help. I have no access to the router, else I would change the shared key to make sure there is no intruder on the wifi.

  Read the article

• Managing multiple Apache proxies simultaneously (mod_proxy_balancer)

  - by Hank

  The frontend of my web application is formed by currently two Apache reverse proxies, using mod_proxy_balancer to distribute traffic over a number of backend application servers. Both frontend reverse proxies, running on separate hosts, are accessible from the internet. DNS round robin distributes traffic over both. In the future, the number of reverse proxies is likely to grow, since the webapplication is very bandwidth-heavy. My question is: how do I keep the state of both reverse balancers / proxies in sync? For example, for maintenance purposes, I might want to reduce the load on one of the backend appservers. Currently I can do that by accessing the Balancer-Manager web form on each proxy, and change the distribution rules. But I have to do that on each proxy manually and make sure I enter the same stuff. Is it possible to "link" multiple instances of mod_proxy_balancer? Or is there a tool out there that connects to a number of instances, and updates all with the same information? Update: The tool should retrieve the runtime status and make runtime changes, just like the existing Balancer-Manager, only for a number of proxies - not just for one. Modification of configuration files is not what I'm interested in (as there are plenty tools for that).

  Read the article

• Apache2 - Hosting two sites on the same domain with different ports

  - by user1026361

  I am hosting a staging site (test.mydomain.com) which currently work well on port 80 for two sites (test.mydomain.com and test.FRmydomain.com) I am working on a new backend and I would like to deploy a third site on this server for testing. My hope is that it will live at test.mydomain.com:4204. I've got some experience with apache and quickly added statements: Listen 4204 NameVirtualHost *:4204 and created a new config for my site. What I imagine are the relevant parts of my config: <VirtualHost *:4204 > ServerAdmin [email protected] ServerName test.mydomain.com:4204 However, the site is not publicly available, by name or ip. If i curl localhost:4204 from the server, I get the expected page content At this point, I'm a bit of a loss on how to go forwards. It seems like my config is correct but not available to be served. Am I better off defining a proxy definition so that, for instance: test.mydomain.com/4204 proxies to my localhost server or is there a way to make the site available via the internet? EDIT: I have added an iptable rule after further Googling with the command: iptables -I INPUT -p tcp --dport 4204 -j ACCEPT I can see apache listening on 4204 and the rule is definitely in place but cant reach the site

  Read the article

• Unable to connect to cable modem when connected to VPN

  - by Spuas

  the scenario is as follows: First I have a cable modem which gives the internet connection. The network is 192.168.0.0/24 and its IP is 192.168.0.1 Second line, I have a router connected to the cable modem. Its "outside" IP is 192.168.0.12. This router creates network 192.168.123.0/24 and its IP there is 192.168.123.254. My computer is wired to the router with IP 192.168.123.126. At this point I am able to access both devices web interfaces by their IPs on a browser (192.168.123.254 for the router and 192.168.0.1 for the cable modem). The problem I have is when I connect to a VPN from the computer. Then I am connected to a second network 10.0.0.0/24 and I get IP 10.0.0.200 (along with 192.168.123.126). I can connect to the router but then I loose connectivity to the cable modem: I cannot acces it through the browser, neither making a ping to it or a tracert. I have tried to add a new route to the windows routes by typing route ADD 192.168.0.1 MASK 255.255.255.0 192.168.123.254 but I cannot access it anyway... Am I missing something on the route adding? Which is the propper way of doing this? Thanks

  Read the article

• Should I use Evernote or Org-mode for taking notes?

  - by tobeannounced

  I am looking for an app that will help me manage my notes, and after coming across Org-mode, I was wondering whether Org-mode's functionality is strong enough that it can remove the need for me to use another note taking app (because org is more of a task management app), such as Evernote. My wishes for a note taking app are: can be accessed offline in some form, eg through an iPhone app or desktop client Org-Mode and Evernote can both do this, however it seems like MobileOrg is more aimed at tasks, rather than notes? If this is the case, I probably would use Evernote in addition to MobileOrg. I can clip web content into easily for research Evernote has the browser extension, how is it with Org-Mode? I know I can use c-c c-l, but how suited is it really for taking notes on stuff I am browsing in Chrome/Firefox? has voice notes on the iPhone and computer too, if possible Org-Mode cannot do this on the iPhone, on the computer could I record audio externally and then link the files in? I can add notes too on my iPhone & computer while not connected to the internet both can do this. The types of notes I am likely to have include: howtos/things I have learnt, documentation on my setup/stuff, research on things I may do in the future, ideas, and task specific notes. I have thought about where I would want to access each of these notes and will post that here if you think it would help. So, is Org-mode strong enough in note-taking and the requirements I listed that I can avoid the need to use a separate tool for taking notes?

  Read the article

• xt_TCPMSS: bad length messages

  - by Matic

  Hey! I'm getting loads of messages like: Jun 23 10:24:20 awakening kernel: [ 1691.596823] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663362] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663495] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663588] xt_TCPMSS: bad length (1448 bytes) Jun 23 10:24:21 awakening kernel: [ 1692.663671] xt_TCPMSS: bad length (1440 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.062914] xt_TCPMSS: bad length (474 bytes) Jun 23 10:24:26 awakening kernel: [ 1697.305525] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:27 awakening kernel: [ 1698.946633] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:36 awakening kernel: [ 1707.481198] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:37 awakening kernel: [ 1708.723526] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:38 awakening kernel: [ 1709.599461] xt_TCPMSS: bad length (805 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.211052] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.260588] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:41 awakening kernel: [ 1712.976058] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.225209] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:43 awakening kernel: [ 1714.914961] xt_TCPMSS: bad length (1492 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192696] xt_TCPMSS: bad length (1480 bytes) Jun 23 10:24:55 awakening kernel: [ 1726.192825] xt_TCPMSS: bad length (1480 bytes) In my dmesg/syslog. This linux machine is among other things used as an internet gateway. Connection is over PPPoE. I have the following line in my iptables script: $IPT -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu # PPPoE fix The frequency of this messages increased 10x when I upgraded from Debian lenny with 2.6.27 to squeeze with 2.6.32 few days ago. Why am I seeing this messages and how can I fix them?

  Read the article

• Running docker in VPC and accessing container from another VPC machine

  - by Bogdan Gaza

  I'm having issues while running docker in AWS VPC. Here is my setup: I've got two machines running in VPC: 10.0.100.150 10.0.100.151 both having an elastic IPs assigned to them, both running in the same internet enabled subnet. Let's say I'm running a web server that serves static files in a container on the 10.0.100.150 machine the container: IP: 172.17.0.2 port 8111 is forwarded on the 8111 port on the machine. I'm trying to access the static files from my local machine (or another non-VPC machine also tried an EC2 instance not running in the VPC) and it work flawlessly. If I try to access the files from the other machine (10.0.100.151) it hangs. I'm using wget to pull the files. Tried to debug it with tcpdump and ngrep and that I have seen is that the request reaches the container. If I ngrep on the host machine I see the requests going in but no response going back. If I ngrep on the container I see the requests going in and the response going back. I've tried multiple iptables setups (with postrouting enabled, with manually forwarding ports etc) but no success. Help in any way - even debugging directions would be much appreciated. Thanks!

  Read the article

• IIS doesn't serve certain file extensions

  - by Alekc

  Hi, i have this weird issue on Win 2k3 server and IIS: Iis has several sites, in one of them i need to create a subdir and set up it as web application. I've noticed that if i create new directory and put some .js/.txt file into it, they will not be served by iis (IE gives an error Internet Explorer cannot display the webpage). If i put the same files in another old site's subdirectory it will show correctly. By sniffing traffic i've seen that iis reply connection state 200 and then drop completely any connection http://domain.com/test2/prova.txt GET /test2/prova.txt HTTP/1.1 Host: domain.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive HTTP/1.x 200 OK If i rename file prova.txt in prova.asp for example it showing without problems so it shouldn't be permissions issue. After making some researches I've found out that it can be caused by missing mime types, I've checked out .txt and .js are present and served by aspnet_isapi.dll. And here comes another weird thing: if i remove mime mapping from directory's properties it's served correctly, but the same thing doesn't work with js. I'm really beginning to be out of ideas, is there someone who have some hint? Thanks in advance.

  Read the article

• How to set up that specific domains are tunneled to another server

  - by Peter Smit

  I am working at an university as research assistant. Often I would like to connect from home to university resources over http or ssh, but they are blocked from outside access. Therefore, they have a front-end ssh server where we can ssh into and from there to other hosts. For http access they advise to set up an ssh tunnel like this ssh -L 1234:proxyserver.university.fi:8080 publicsshserver.university.fi and put the proxy settings of your browser to point to port 1234 All nice and working, but I would not like to let all my other internet traffic go over this proxy server, and everytime I want to connect to the university I have to do this steps again. What would I like: - Set up a ssh tunnel everytime I log in my computer. I have a certificate, so no passwords are needed - Have a way to redirect some wildcard-domains always through the ssh-server first. So that when I type intra.university.fi in my browser, transparently the request is going through the tunnel. Same when I want to ssh into another resource within the university Is this possible? For the http part I think I maybe should set up my own local transparent proxy to have this easily done. How about the ssh part?

  Read the article

• How to get a new-pssession in PowerShell to talk to my ICS-connected laptop for Remoting

  - by Scott Bilas

  If I have my laptop on the LAN, then Powershell remoting works fine from my workstation to the laptop. However, the LAN is wireless, and so sometimes I will connect on a wire to my workstation. It has two ethernet ports so I have the secondary wired up to share to the laptop using Win7's Internet Connection Sharing. (Btw I know that avoiding ICS would solve the problem, but that's not an option right now.) So my question is: what magic registry bits or command line options do I need to flip to get remoting to work to my laptop through ICS? Here's what happens when I try it: new-pssession -computername 192.168.137.161 [192.168.137.161] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionOpenFailed I'm having a hard time understanding the documentation for PowerShell and WinRM. I've tried messing with allowing ports in the firewall and setting TrustedHosts to * on my workstation (don't think this is a good idea on the laptop). I have no idea where to go from here, would appreciate any help.

  Read the article

• linux Firewall question

  - by bcrawl

  I have few generic questions about firewalls and I thought the community up here could help me out. 1) So I recently installed Ubuntu server barebones. I checked for open ports, none were open which was great. Is that because there was a firewall installed or was it because there were no applications installed? 2) I installed some applications, (Apache, postgres,ssh, Java app and some few). Between these, I ended up opening a few ports (~10). Now I have a list of all the ports I would need open. So, how do I go about protecting them? [Is this the right question to ask? does the process go like this, Install Firewall - Allow Said needed ports - deny rest using IPtables rules] This is going to be open to the internet. Hosting low traffic ecommerce sites. 3) What do you think is the easiest way for me to quasi-secure the server, [low maintenance overhead/simplicity. Any open source "software" which can make my life easier?] 4) Finally, of the said open ports [2], I have 2 ports I need to close because they are telnet ports. Can I close these ports without installing a "firewall" Thanks all for the help and Merry Christmas!!!!!!!

  Read the article

< Previous Page | 795 796 797 798 799 800 801 802 803 804 805 806  | Next Page >