Search Results

Search found 413 results on 17 pages for 'expansion'.

Page 8/17 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Unix LVM: how to resize root lvm

  - by Hussein Sabbagh

  I took over a virtual server at work after a co-worker left. He, however, setup the server incorrectly at multiple stages and im cleaning them up as I run into them... Currently I realized that the file system is broken in half onto 2 logical volumes both at 50gb. One is mounted as the root directory and the other as the /home directory. Saddly, the server has taken up 46gb of the root lv and i need to expand it. I have already shrunk and remounted the home lv. I resized the root lv, but I can't figure out how to unmount the root directory while the computer is on. Obviously this needs to be done before I can finalize the expansion, but I don't know how. I'd appreciate any help or pointing in the right direction. Thanks in advance. PS this is on a CentOS server.

  Read the article

• Interpreting regular expressions using find in Linux confusion

  - by PeanutsMonkey

  I am attempting to use the find command and came across an article at http://www.linux.ie/newusers/beginners-linux-guide/find.php which states The wildcard character is escaped with a slash so BASH sends a literal asterisk to the find utility as an argument instead of performing filename expansion and passing any number of files in as arguments. for the command find . -name up\*. Being new to the world of Linux I don't quite understand how the use of a backslash which is meant to escape the meta character * is interpreted and returns results as though as it is being passed to find. Does it mean if I use the -name option I have to use a backslash to pass a wildcard and if I don't use -name I don't have to use a backslash?

  Read the article

• Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

  - by Scott McKinney

  I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

  Read the article

• best filesystem for an aws s3 like service

  - by gucki

  Hi! I need to build a fault tolerant, highly available key/value storage (no posix, only same functionaluty as S3) using cheap existing hardware. The storage should be able to handle several billions of items. The maximum size of items is around 1GB, most are only several KB. What's the best software/ filesystem for this task? I already had a brief look at mogilefs, mongodb (grid-fs) & glusterfs but I'm not really sure which is stable & fault tolerant enough. The simpler the setup and later expansion the better :). Corin

  Read the article

• Unable to create context rendering error when run OpenGL application

  - by Rodnower

  Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

  Read the article

• Buildcraft Minecraft mod causing crashes, NVIDIA-304xx Linux Drivers, KDE

  - by wolfo9999

  All is perfect, 96 fps average. Until an item tries to enter a buildcraft pipe. Tekkit instantly crashes, no error dialog. I have no idea what logs to look at for information on the crash, or how to fix it. OpenGL is enabled in KDE, Driver package is nvidia-304xx lspci output: VGA compatible controller: NVIDIA Corporation GT218 [Quadro FX 380M] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 172b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] [virtual] Expansion ROM at d3080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia

  Read the article

• 5v PCI to PCI-X or PCIe adapter?

  - by SiegeX

  We unfortunately have a very expensive ($10K) full-length 5 volt PCI card that we would like to use in the same system as another expensive PCI-X card. As luck would have it, it seems that PCI-X is not backwards compatible with 5v PCI cards. It would be a real shame to have to order a whole new server just to accommodate these two cards together. Does there exist any internal converter/adapter that will allow one to place a full-length 5v PCI card into either a PCI-X or PCIe slot? I've found an external expansion box that suits our needs but it's 1) External and 2) $1100. The only internal adapters I've been able to find go from Low-profile PCI - PCIe; nothing that seems to support full-height, full-length PCI cards.

  Read the article

• Unable to create context rendering error whet run OpenGL application

  - by Rodnower

  Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• CPU I/O communication part 2

  - by b-gen-jack-o-neill

  Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

  Read the article

• Bash command substitution not working as expected

  - by Joe Fruchey

  I'd like to view the last few lines of a file, but I want the columns aligned. Basically, I want to disable wordwrap. This is straightforward with: tail $FILE | cut -c -80 But I'm trying to generalize my script for other users, and I'd like to cut to the actual terminal width, which I can get with: stty size | cut -d" " -f2 So I would imagine that I could just tail $FILE | cut -c -`stty size | cut -d" " -f2` but it doesn't work: stty: standard input: Invalid argument cut: invalid range with no endpoint: - Try `cut --help' for more information. (Same results with the 'new' $() expansion.) Now, if I echo it, it seems fine: echo cut -c -`stty size | cut -d" " -f2` cut -c -103 Am I just missing an escape char? Or is this somehow just not possible? Thanks.

  Read the article

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive. How would this work in Win2k8? If I setup my unit with a separate drive as C: and a 1TB drive as D:. The D: would then be segmented into d:\Videos d:\Music d:\Pictures. When everything gets close to filling the storage-drive, I would like to expand the storage, but I wouldn't want to have E:\Videos or d:\Videos2 (using the NTFS folder mount thingy). I still want all my Videos to reside in D:\Videos and I want the OS to decide which drive it's going to be stored on... Some kind of on-the-fly jbod expansion :) Is this at all possible in Windows 2008?

  Read the article

• if there are multiple kernel module can drive the same device, what is the rule to choose from them?

  - by Dyno Fu

  both pcnet32 and vmxnet can drive the device. $ lspci -k ... 02:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) Subsystem: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] Flags: bus master, medium devsel, latency 64, IRQ 19 I/O ports at 2000 [size=128] [virtual] Expansion ROM at dc400000 [disabled] [size=64K] Kernel driver in use: vmxnet Kernel modules: vmxnet, pcnet32 both kernel modules are loaded, $ lsmod | grep net pcnet32 32644 0 vmxnet 17696 0 mii 5212 1 pcnet32 as you see, kernel driver in use is vmxnet. is there any policy/algorithm in kernel how to choose from the candidates?

  Read the article

• zsh completion will not work in emacs shell

  - by benhsu

  I'm learning about the more powerful tab-completion and expansion capabilities of zsh, and they don't seem to work when I run zsh under emacs with M-x shell: cat $PATH<TAB> expands the tab variable in Terminal, but in shell-mode it just beeps. I poked around the emacs environment and here's what I found: TAB (translated from ) runs the command completion-at-point, which is an interactive compiled Lisp function in `minibuffer.el'. It is bound to TAB, . (completion-at-point) Perform completion on the text around point. The completion method is determined by `completion-at-point-functions'. completion-at-point-functions is a variable defined in `minibuffer.el'. Its value is (tags-completion-at-point-function) So I'm surmising I need to add a function to completion-at-point-functions, but which one?

  Read the article

• Test tomcat for ssl renegotiation vulnerability

  - by Jim

  How can I test if my server is vulnerable for SSL renegotiation? I tried the following (using OpenSSL 0.9.8j-fips 07 Jan 2009: openssl s_client -connect 10.2.10.54:443 I see it connects, it brings the certificate chain, it shows the server certificate, and last: SSL handshake has read 2275 bytes and written 465 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 50B4839724D2A1E7C515EB056FF4C0E57211B1D35253412053534C4A20202020 Session-ID-ctx: Master-Key: 7BC673D771D05599272E120D66477D44A2AF4CC83490CB3FDDCF62CB3FE67ECD051D6A3E9F143AE7C1BA39D0BF3510D4 Key-Arg : None Start Time: 1354008417 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) What does Secure Renegotiation IS supported mean? That SSL renegotiation is allowed? Then I did but did not get an exception or get the certificate again: verify error:num=20:unable to get local issuer certificate verify return:1 verify error:num=27:certificate not trusted verify return:1 verify error:num=21:unable to verify the first certificate verify return:1 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/html;charset=ISO-8859-1 Content-Length: 174 Date: Tue, 27 Nov 2012 09:13:14 GMT Connection: close So is the server vulnerable to SSL renegotiation or not?

  Read the article

• Advantages to upgrading from SharePoint Foundation 2010?

  - by sharepointQuestion

  I feel like this should be extremely obvious, but after staring at this document from Microsoft and Googling for a while I'm still at a loss as to the advantages of SharePoint Server 2010 and SharePoint Enterprise 2010 over SharePoint Foundation 2010. My users currently use SharePoint Foundation 2010 to collaborate on a handful of excel documents within the office. There is talk of expanding to have a second and third SharePoint server at another plant and at our corporate offices. If there is a reason to upgrade now would be a good time to ask for the money while we're talking expansion. Is it worth it from either an administrative or an end-user perspective? Or is the free version really just that wonderful?

  Read the article

• SQL-Server 2008 : Table Insert and Range Check ?

  - by LB .

  I'm using the Table Value constructor to insert a bunch of rows at a time. However if i'm using sql replication, I run into a range check constraint on the publisher on my id column managed automatically. The reason is the fact that the id range doesn't seem to be increased during an insert of several values, meaning that the max id is reached before the actual range expansion could occur (or the id threshold). It looks like this problem for which the solution is either running the merge agent or run the sp_adjustpublisheridentityrange stored procedure. I'm litteraly doing something like : INSERT INTO dbo.MyProducts (Name, ListPrice) VALUES ('Helmet', 25.50), ('Wheel', 30.00), ((SELECT Name FROM Production.Product WHERE ProductID = 720), (SELECT ListPrice FROM Production.Product WHERE ProductID = 720)); GO What are my options (if I don't want or can't adopt any of the proposed solution) ? Expand the range ? Decrease the threshold ? Can I programmatically modify my request to circumvent this problem ? thanks.

  Read the article

• USB HD Freezes Windows Explorer

  - by nfplee

  I recently purchased a "Seagate STBX1000200 1TB Expansion 2.5 inch External Hard Drive". It has been working without problems until recently. When i plug the device into a USB port the device is recognised as it appears in the device manager but when i go to Windows Explorer and try to open it (or right click on it) it hangs/freezes windows explorer. Please note i am using Windows 7 Professional. I have already tried various things without success after searching for people with similar problems. I did read that it could be a problem with how the computer assigns a drive letter. But whrn i go to disk management (when running as an administrator) it hangs and displays the following message: Connecting to virtual disk service I'd appreciate it if anyone could offer some advice. Thanks

  Read the article

• How to know the level of a symlink in linux?

  - by ???

  For example, if a symlink a -> b b -> c c -> d say, the symlink level of a is 3. Then, is there any utility to get this info? And, also I want to get the expansion detail of a symlink, which will show me something like: 1. /abc/xyz is expanded to /abc/xy/z (lrwx--x--x root root) 2. /abc/xy/z is expanded to /abc/xy-1.3.2/z (lrwx--x--x root root) 3. /abc/xy-1.3.2/z is expanded to /abc/xy-1.3.2/z-4.6 (lrwx--x--x root root) 4. /abc/xy-1.3.2/z-4.6 is expanded to /storage/121/43/z_4_6 (lrwx--x--x root root) 5. /storage/121/43/z_4_6 is expanded to /media/kitty_3135/43/z_4_6 (lrwx--x--x root root) So I can diagnostic with the symlinks. Any idea?

  Read the article

• What's a good tool for collecting statistics on filesystem usage?

  - by Kamil Kisiel

  We have a number of filesystems for our computational cluster, with a lot of users that store a lot of really large files. We'd like to monitor the filesystem and help optimize their usage of it, as well as plan for expansion. In order to this, we need some way to monitor how these filesystems are used. Essentially I'd like to know all sorts of statistics about the files: Age Frequency of access Last accessed times Types Sizes Ideally this information would be available in aggregate form for any directory so that we could monitor it based on project or user. Short of writing something up myself in Python, I haven't been able to find any tools capable of performing these duties. Any recommendations?

  Read the article

• How do I backup (from Vista Home Premium) to a FAT32 HDD connected to a wireless router with no user account or password set?

  - by Scubadooper

  I have a Seagate expansion 2TB HDD which I've managed to get working on my wireless router (thanks to fat32format) however I haven't managed to set my backup to work with it. Vist Home Premium requires that I input a username and password in the backup utility. As far as I'm aware that type of access control isn't set on the HDD: Can I set up the access control on the HDD? If so how Or, can I set the backup to work without it? If so how Thanks for your help, I haven't been able to find the answer anywhere on the net so far

  Read the article

• Why should I use $[ EXPR ] instead of $(( EXPR ))?

  - by qdii

  On the paragraph explaining arithmetic expansion, Bash's user guide uncovers 2 different ways of evaluating an expression, the first one uses $((?EXPRESSION?)) and the second one uses $[?EXPRESSION?]. The two ways seem pretty similar as the only difference I have found is: $[?EXPRESSION?] will only calculate the result of EXPRESSION, and do no tests: Yet, I am intrigued because the same document recommends using $[?EXPRESSION?] rather than $((?EXPRESSION?)). Wherever possible, Bash users should try to use the syntax with square brackets: Why would you want that if less tests are being done?

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• Drive still usable if Seatools reports errors?

  - by Rob

  I have a Seagate 3TB Expansion Desktop drive that was part of a Linux RAID 6 array that failed. I eventually did a zero fill both through Seagate DiscWizard and via Linux dd, neither reported errors. When I ran Seatools now, I got: Short DST - Started 5/31/2014 10:04:36 PM Short DST - Pass 5/31/2014 10:05:37 PM Long Generic - Started 5/31/2014 10:15:19 PM Bad LBA: 518242762 Not Repaired (whole bunch of bad LBAs ommited) Bad LBA: 518715255 Not Repaired Long Generic Aborted 6/1/2014 3:12:18 AM i.e. the short test passed, the long test failed. Unfortunately, the drive is out of warranty, so I can't just RMA it. But I hate tossing a drive that can still be used. So, my questions are: If the zero fill succeeded, and the short test passed, can I still use the whole drive? if not, since I'm using LVM on top of RAID, is there a way to tell either of these to just skip the bad area? If not the above, can I just create partitions before and after the part of the drive with the bad LBAs?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >