Search Results

Search found 19125 results on 765 pages for 'hard disk'.

Page 8/765 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Unable to recognize hard drive after replacing a drive

    - by Peter Schriver
    I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

    Read the article

  • Is my hard drive about to fail?

    - by Cody Harlow
    I hear some squeaking noises sometimes when I use my computer so I ran smartctl. This is the results: === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 5953 37922655 # 2 Extended offline Completed: read failure 90% 5953 37922655 # 3 Short offline Completed: read failure 90% 5953 37922655 # 4 Short offline Completed without error 00% 429 - # 5 Extended offline Aborted by host 90% 429 - # 6 Short offline Completed without error 00% 429 - # 7 Short offline Completed without error 00% 429 - Is this a bad sign?

    Read the article

  • Windows 7 setup can not find hard disk

    - by Akshay Kulkarni
    Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

    Read the article

  • Using old RAID configured disk after new disk has been used in the controller

    - by Narendra
    I have Dell Poweredge T100 server with Dell SAS 6 and two hard disk on RAID 1. Last week the server died including one RAID 1 hard disk. We sent the server for repair and the problem with PSU was fixed. But the repair guys also checked the RAID controller by configuring new RAID with their test hard disk. Now if I install one working RAID 1 disk and one new disk, will the RAID controller let me continue my old RAID 1 and resync the new disk and continue? What I fear is the RAID controller will want the test hard from repair guys. Thus I have to re configure RAID 1 forcing me to wipe the working disc. If so, I've to backup the working disc, reconfigure RAID 1 and reinstall? Or is there better way? Note: I'm using DELL SAS confiugratio utility to manage RAID. (Press CTRL+C after BIOS)

    Read the article

  • My Hard Disk Drive is not visible until I use it

    - by Matthew
    So, suddenly something went wrong. At the beggining of my Ubuntu usage it was all right, but from about 2-4 weeks I've got this problem: Whenever I try to reach my HDD, i have to open it first by files explorer. Example: I use text editor. Last file fails to load, so I got to open it manually. It's in bookmarked file. I want to reach my bookmark, which is on HDD(partition for both Ubuntu and Windows , NTFS). If i want to reach my bookmark, i have to go there manually(or at least to HDD, then bookmarks pops up). It also doesn't appear at my side bar until i use it. It kinda looks like it wasn't mounted till then, I don't know. It would be nice if I could deal with it, let's say, automatically. Thanks in advance.

    Read the article

  • how to install Ubuntu on a fresh hard drive

    - by Herman Wiegman
    I attempted to install Ubuntu from a USB stick to my Intel 4 3GHz computer with 80GB HDD. The installer was doing well, then it said something to the effect of "errors on the source USB, or the target HDD" The recommendation was to download the installer again. I suspected my HDD was going bad so I figured I would investigate. What I found was a partially formatted 80GB HDD. I repartitioned it via a different computer. Now a fresh copy of the Ubuntu USB installer is not able to move past the start-up screen (it freezes). I was able to purchase a new / clean HDD, but still the fresh copy of the installer still locks up after the initial opening screen (locks up after about 2 screens worth of installations steps). Does this sounds like a HDD NTHS issue or a CPU/hardware/memory issue? or should I move to a CD image file rather than my USB stick? Now my computer is stuck... no OS.. no way to go back to Windows (upgrade OS CD only). Any insight would be greatly appreciated. Stuck in Schenectady Herman Wiegman

    Read the article

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • Does installing windows format the hard disk?

    - by Jason
    My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

    Read the article

  • Why can't 12.04 installer see one of my hard drives

    - by imparatore
    I'm trying to install Ubuntu 12.04 32-bit from a USB pen drive. I have two drives, a WD Caviar Black and a Samsung SPC250. At the "installation type" stage, it only sees my Samsung and the USB pen drive, not the WD. I checked the drive with gparted and everything seems fine. I tried the alternate installer but that doesn't work either I tried changing from IDE to AHCI in the BIOS and back What can I do now?

    Read the article

  • disk not accessible

    - by user107044
    i formatted my hard drive yesterday and it was working well even after the formatting. But when I restarted my system again , is is showing that the space is alloted to my files but they are inaccessible. I have even tried to unhide the files and folders, if they got hidden somehow. But nothing works. the hard drive is being shown empty but the properties are saying that it still conatins the data : http://imgur.com/ObjTE in the image, it is showing that the directory has only 1 file of size:4.8 kbps but the space being used by the drive is 11.6 GB. do suggest some solution.

    Read the article

  • error while trying to resize the partition

    - by speedox
    im running out of space and i tried to resize the partition using g-parted but i got an error: Checking for bad sectors ... Bad cluster: 0x2904636 - 0x2904636 (1) Bad cluster: 0x290526d - 0x290526e (2) Bad cluster: 0x29052fd - 0x2905300 (4) Bad cluster: 0x2905392 - 0x2905392 (1) Bad cluster: 0x2905425 - 0x2905428 (4) Bad cluster: 0x290555d - 0x2905560 (4) Bad cluster: 0x29055f1 - 0x29055f8 (8) Bad cluster: 0x2905681 - 0x2905688 (8) Bad cluster: 0x29057ac - 0x29057ac (1) Bad cluster: 0x29887dd - 0x29887dd (1) Bad cluster: 0x299a086 - 0x299a086 (1) Bad cluster: 0x348ec05 - 0x348ec05 (1) Bad cluster: 0x353dabb - 0x353dabb (1) Bad cluster: 0x353dba4 - 0x353dba4 (1) Bad cluster: 0x354a162 - 0x354a162 (1) Bad cluster: 0x354a1ce - 0x354a1ce (1) ERROR: This software has detected that the disk has at least 40 bad sectors. **************************************************************************** * WARNING: The disk has bad sector. This means physical damage on the disk * * surface caused by deterioration, manufacturing faults or other reason. * * The reliability of the disk may stay stable or degrade fast. We suggest * * making a full backup urgently by running 'ntfsclone --rescue ...' then * * run 'chkdsk /f /r' on Windows and rebooot it TWICE! Then you can resize * * NTFS safely by additionally using the --bad-sectors option of ntfsresize.* **************************************************************************** I opened the "disk utility" and clicked on "Smart DATA" button I got this image:

    Read the article

  • System checks for disk drive error every time it boots

    - by Starx
    When my disk space for the ubuntu installation partition was getting low, from a live cd, I used gparted to increase its volume capacity, but deleting another partition and merging it to the ubuntu partition. Since then onwards, I am receiving disk checking for errors at boot screen for my partitions, always. What seem to be causing this and how to fix it? Update Here is my boot.log if it provides few insight fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda1 was not cleanly unmounted, check forced. ubuntu: clean, 501325/1310720 files, 2958455/5242880 blocks /dev/sda1: 241/51272 files (3.3% non-contiguous), 73541/102400 blocks mountall: fsck /boot [358] terminated with status 1 Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox ... /dev/sda1 is a separate grub partition for my dual OS's

    Read the article

  • Why doesn't the Ubuntu Installer see all of my hard drives

    - by atodd
    I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed. I've tried everything I know. I'm not sure if its a BIOS setting or something else I've missed. I've also tried both the desktop and alternate amd64 installs with the same result.

    Read the article

  • Updating to linux-image-3.2.0-26-generic occupies all disk space

    - by user42228
    I just ran a normal update through the update manager that wanted to update me to linux-image-3.2.0-26-generic. The installation paused halfway with a message that the root was full. I checked the disk usage, and noticed that one of the newly installed files: /lib/modules/3.2.0-26-generic/modules.ccwmap took up 63GB(!). Compared to the previous version: /lib/modules/3.2.0-24-generic/modules.ccwmap that took up only 4KB it seems like something went awfully wrong! As mentioned the update was paused when i ran out of disk space. There is no option in the update dialog to cancel or perform rollback on the update. Is it asking for trouble to kill the update manager? Any ideas as to what went wrong, and what I can do to remedy it? It's only minimal how much space I can free on that partition (without deleting the above mentioned file). If it is any help, the update was paused after this: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic

    Read the article

  • upgrading hard drive on toshiba satellite 5200 ....

    - by krul
    Hi, I have this beautiful & old laptop and would like to replace hard drive. I've purchased samsung 120GB hard drive and exchange hard drives. When I turn on computer my laptop doesn't recognize hard drive at all. It doesn't find nothing under master drive. What am I doing wrong, and is it possible to make this upgrade? Thanks

    Read the article

  • Hard disk with trustworthy SMART support

    - by Paggas
    Which hard disk drive do you suggest with trustworthy SMART diagnostics? That is, a hard disk that can truthfully report sector reallocations and other pre-failure indicators. I'm asking this because I have seen quite a few hard disks with SMART support fail with no warning in the SMART diagnostics, so a hard drive that can report such problems with some degree of reliability would be much appreciated :)

    Read the article

  • Web-based disk space visualizer

    - by Martijn
    I have a number of Linux webservers for which I'd like to track where disk space is going and keep disk space to a minimum. Typically I login on SSH and use du to find out where disk space is wasted but this is cumbersome and slow. A visualisation tool like KDirStat would be ideal, but it requires installing an X server at the very least, which kind of defeats the purpose. Is there any web-based disk space visualizer? I'm open to alternative solutions.

    Read the article

  • Repair corrupt hard disk on Mac without install CD

    - by Sarah
    The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

    Read the article

  • Macbook won't read disk

    - by Gracie
    I have a macbook that I erased the original iOS on to restart with Ubuntu but when I put in my home burned disk it doesn't read it correctly and makes loud clicking noises. I burned it on a TDK CD-R80 700 MB CD from Windows 7 and even did the confirm to make sure it burned correctly. It has never read CDs like that before, so it's weird. Should I just make another CD? Or is there something wrong with the Macbook.

    Read the article

  • SOS, i erased a disk,1T.by mistake

    - by gabriel
    i tried to make bootable a flash drive from the startup disk creator, and i wanted to copy an iso of the 11.10 ubuntu, and when i tried to erase the flash drive i pressed erase on another removable drive 1T storage by mistake, VVVery very very quickly less than one second and with no warning everything was erased i suppose.Is that thing possible?When i tried before theis to erase the flash drive it took around a minute to erase the 8GB.But now less than a second for 1T? Please help, Gabriel

    Read the article

  • Downloading error "Could not retrieve the required disk image "

    - by Freed Ahmad
    When I try to download Ubuntu 12.04 using the Windows installer (Wubi) through a proxy server which requires proxy authentication, after I choose the Ubuntu installation size, username and password, when I click the Install button, I get this error: An error occurred: Could not retrieve the required disk image files For more information, please see the log file: c:\users\(myusername)\appdata\local\temp\wubi-12.04-rev266.log The log file says: proxy authentication error How can I solve this problem?

    Read the article

  • Error mounting an external HDD

    - by Slash
    I want to mount an external HDD.I have tried many things but still no success.When i try to mount it from Disk Utility i get this error: Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at tuxera.com/community/ntfs-3g-faq/#unprivileged

    Read the article

  • Getting windows 7 to boot from external hard drive. Using Ubuntu

    - by SMS
    I have Ubuntu 12.04LTS as my current operating system, and I have a Windows 7 iso on a disk. I'm using an external hard drive because my internal hard drive has become damaged. I need to get Windows to install onto my external hard drive (where Ubuntu is as well). The iso disk will not install windows to the hard drive. Can anyone help guide me through the process of getting windows on the external?

    Read the article

  • How to use qcow2 disk image in Linux?

    - by sauparna
    I have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows: modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 /host/disk100G.img mount /dev/nbd0p1 /home/rup/disk But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again: qemu-nbd -d /dev/nbd0 umount joborkhaki/ What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >