Search Results

Search found 3276 results on 132 pages for 'luck'.

Page 8/132 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Only receiving one document at a time from new web server.

  - by Robert Kuykendall

  We're trying to move our internal ticketing system from a Microsoft Small Business Server in the server closet to a Rackspace Cloud Server. The install is Fedora 11 LAMP, and should be default out of the box, except for the vhosts appended to the bottom of the httpd.conf. The new server is suffering from crippling load times, and watching the page load in Firebug it's easy to see the problem occurring, but I can't figure out the cause. Here is the [old server] (http://rkuykendall.com/uploads/old.server.png). I was expecting something like this, but a little slower since it was no longer hosted locally. Instead, the [new server] (http://rkuykendall.com/uploads/new.server.png) appears to only serve one file at a time. Here's another example of this [staircase load time effect] (http://rkuykendall.com/uploads/staircase.png) and another very clear example of the [staircase effect] (http://rkuykendall.com/uploads/staircase2.png). I talked to some guys on Freenode #httpd with no luck. I created a duplicate server to play with, and also created a fresh server with Fedora Core 13 and moved over just the database and web files with no luck. Any suggestions? ( image links disabled due to n00b-spam-restrictions )

  Read the article

• Replaced CPU and black screen but no beep?

  - by luke

  I'm having a bit of trouble with a GIGABYTE GA-MA78G-DS3H (rev. 2.0) motherboard. Recently when trying to clean my AMD Phenom II X 4 CPU, I dropped it and broke some pins. I have now brought a Athlon 64 X2 5400+. However, it does not seem to work. To begin with, I cleared the CMOS via the jumper located near the battery. This was because I had my AMD Phenom II overclocked and did not wish for the same voltage to go to the new CPU. I then tried booting with the monitor plugged into the chipsets VGA but no luck. No signal was sent to the monitor, and the monitor just went into standby. I then tried it off the graphics card but the same happened again. Then I tried to check whether the CPU could executed some BIOS codes by stripping the RAM out and making sure a speaker was plugged in but no beeps could be heard. I replaced the speaker and tried again but no luck. The CPU is brand-new so what is going wrong?

  Read the article

• Can anyone help me make my reverse proxy actually cache?

  - by Lenary

  Hi folks, I'm trying to configure a Reverse Caching Proxy but so far have had no luck. I would preferrably like to use apache (that will be all it will be used for), but am open to solutions using other software that can also run on Mac OS X 10.6 (I have also tried using Varnish and Squid, but with no more luck). We're running a system with about 80 mac mini clients that will be requesting lots of video from a server. To reduce load, we thought we could use Apache (which comes on the macs by default) to cache this video forever (or at least as long as possible) onto the macs' disks. I have managed to get a reverse proxy set up with apache using ProxyPass etc, but when i tried to add CacheEnable disk / to the configuration, nothing happened (i do have mod_disk_cache included). Can anyone help with my issue? The apache config file is here Thanks in advance Edit: So far I have been testing it with smaller text files, and it hasn't been caching properly. This suggests it is nothing to do with us actually downloading video, but actually to do with the cache configuration.

  Read the article

• Printer spools but doesn't print

  - by DKNUCKLES

  I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

  Read the article

• The requested operation has failed! (cannot find answer)

  - by Geoff

  I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

  Read the article

• firefox, opera 'The connection was reset' on few POST method calls on Windows and Ubuntu

  - by Gopalakrishnan Subramani

  my website works well with GET method, also few POST methods. Some pages with POST method doesn't work. Some pages with POST work. For example, login page uses POST that works fine. When I post the data on webpage, firefox says "Connecting..." and finally report connection timed out error. The same behavior happens with Opera as well. However Google Chrome works fine. At the server side, I use nginx 1.2.4 with HTTPS and uwsgi for python (flask framework) app. I use geotrust certificate. The same behavior happens with Windows 7 and Ubuntu 12.04 on firefox. I tried firefox in safemode, but no luck. Set auto-detect proxy settings. no luck. Cleared all cookies. no luck Anyone help me to fix this issue? I am posting ngix config. shame on me. I use root, I know which is not advised. need to fix soon. user root; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 80; server_name www.example.com; rewrite ^(.*) https://example.com$1 permanent; } server { listen 80; server_name example.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; server_name example.com; keepalive_timeout 70; ssl on; ssl_certificate /root/cc.cert; ssl_certificate_key /root/cc.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers HIGH:!aNULL:!MD5; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/tmp/uwsgi.sock; } } } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Creating my first F# program in my new &ldquo;Expert F# Book&rdquo;

  - by MarkPearl

  So I have a brief hour or so that I can dedicate today to reading my F# book. It’s a public holiday and my wife’s birthday and I have a ton of assignments for UNISA that I need to complete – but I just had to try something in F#. So I read chapter 1 – pretty much an introduction to the rest of the book – it looks good so far. Then I get to chapter 2, called “Getting Started with F# and .NET”. Great, there is a code sample on the first page of the chapter. So I open up VS2010 and create a new F# console project and type in the code which was meant to analyze a string for duplicate words… #light let wordCount text = let words = Split [' '] text let wordset = Set.ofList words let nWords = words.Length let nDups = words.Length - wordSet.Count (nWords, nDups) let showWordCount text = let nWords,nDups = wordCount text printfn "--> %d words in text" nWords printfn "--> %d duplicate words" nDups   So… bad start - VS does not like the “Split” method. It gives me an error message “The value constructor ‘Split’ is not defined”. It also doesn’t like wordSet.Count telling me that the “namespace or module ‘wordSet’ is not defined”. ??? So a bit of googling and it turns out that there was a bit of shuffling of libraries between the CTP of F# and the Beta 2 of F#. To have access to the Split function you need to download the F# PowerPack and hen reference it in your code… I download and install the powerpack and then add the reference to FSharp.Core and FSharp.PowerPack in my project. Still no luck! Some more googling and I get the suggestions I got were something like this…#r "FSharp.PowerPack.dll";; #r "FSharp.PowerPack.Compatibility.dll";; So I add the code above to the top of my Program.fs file and still no joy… I now get an error message saying… Error    1    #r directives may only occur in F# script files (extensions .fsx or .fsscript). Either move this code to a script file, add a '-r' compiler option for this reference or delimit the directive with '#if INTERACTIVE'/'#endif'. So what does that mean? If I put the code straight into the F# interactive it works – but I want to be able to use it in a project. The C# equivalent I would think would be the “Using” keyword. The #r doesn’t seem like it should be in the FSharp code. So I try what the compiler suggests by doing the following…#if INTERACTIVE #r "FSharp.PowerPack.dll";; #r "FSharp.PowerPack.Compatibility.dll";; #endif No luck, the Split method is still not recognized. So wait a second, it mentioned something about FSharp.PowerPack.Compatibility.dll – I haven’t added this as a reference to my project so I add it and remove the two lines of #r code. Partial success – the Split method is now recognized and not underlined, but wordSet.Count is still not working. I look at my code again and it was a case error – the original wordset was mistyped comapred to the wordSet. Some case correction and the compiler is no longer complaining. So the code now seems to work… listed below…#light let wordCount text = let words = String.split [' '] text let wordSet = Set.ofList words let nWords = words.Length let nDups = words.Length - wordSet.Count (nWords, nDups) let showWordCount text = let nWords,nDups = wordCount text printfn "--> %d words in text" nWords printfn "--> %d duplicate words" nDups  So recap – if I wanted to use the interactive compiler then I need to put the #r code. In my mind this is the equivalent of me adding the the references to my project. If however I want to use the powerpack in a project – I just need to make sure that the correct references are there. I feel like a noob once again!

  Read the article

• 12.10 unable to install or even run from Live CD with nVidia GTX 580

  - by user99056

  I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

  Read the article

• Enabling Session State in SharePoint 2010?

  - by Steve Danner

  I have a web service built for SharePoint 2007 that I am trying to port to SharePoint 2010. This web service is dependent on session state to function properly, but so far, I have been enable to get session state to work at all in SharePoint 2010. This web service runs as its own web application under t he /_vti_bin virtual directory. I have tried all of the following with no luck: Ensured the "State Service" service application is running. Added the System.Web.SessionState.SessionStateModule http module to my application's web.config file. Added the System.Web.SessionState.SessionStateModule http module to my SharePoint root web.config file. Added <pages enableSessionState="true" /> to my application's web.config file. Added <pages enableSessionState="true" /> to my root web.config file. Additional Environment info: Visual Studio 2008 - SP1 .NET 3.5 - SP1 SharePoint 2010 - RC Windows Server 2008 R2 ASMX web service (not WCF) Had anyone had any luck getting a web application or web service to use session state in SharePoint 2010 yet? Thanks! Steve

  Read the article

• Paperclip and Amazon S3 Issue

  - by Jimmy

  Hey everyone, I have a rails app running on Heroku. I am using paperclip for some simple image uploads for user avatars and some other things, I have S3 set as my backend and everything seems to be working fine except when trying to push to S3 I get the following error: The AWS Access Key Id you provided does not exist in our records. Thinking I mis-pasted my access key and secret key, I tried again, still no luck. Thinking maybe it was just a buggy key I deactivated it and generated a new one. Still no luck. Now for both keys I have used the S3 browser app on OS X and have been able to connect to each and view my current buckets and add/delete buckets. Is there something I should be looking out for? I have my application's S3 and paperclip setup like so development: bucket: (unique name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] test: bucket: (unique name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] production: bucket: (unique_name) access_key_id: ENV['S3_KEY'] secret_access_key: ENV['S3_SECRET'] has_attached_file :cover, :styles => { :thumb => "50x50" }, :storage => :s3, :s3_credentials => "#{RAILS_ROOT}/config/s3.yml", :path => ":class/:id/:style/:filename" Note: I just added the (unique name) bits, those aren't actually there--I have also verified bucket names, but I don't even think this is getting that far. I also have my heroku environment vars setup correctly and have them setup on dev

  Read the article

• Get contact name from just the number

  - by user1190019

  Say i have an edit text and a button. In the edit text you would type a number and then when you hit the button it will either show the contact information or return with the name of that contact. I have tried all sorts of methods provided with no luck. The one i have successfully gotten the furthest with was the following... But i had no luck returning the name. Cursor phoneCursor = null; contactList = new HashMap<String,String>(); try{ Uri uContactsUri = ContactsContract.CommonDataKinds.Phone.CONTENT_URI; String strProjection = ContactsContract.CommonDataKinds.Phone.DISPLAY_NAME; phoneCursor = getContentResolver().query(uContactsUri, null, null, null, strProjection); phoneCursor.moveToFirst(); String name = ""; String phoneNumber = ""; int nameColumn = phoneCursor.getColumnIndex(Phone.DISPLAY_NAME); int phoneColumn = phoneCursor.getColumnIndex(Phone.NUMBER); phoneCursor.moveToNext(); } } catch(Exception e){ Log.e("[SmsMain] getContactData", e.toString()); } finally{ if(phoneCursor != null){ phoneCursor.close(); phoneCursor = null; } } }

  Read the article

• Alternatives to Java for Android development?

  - by paul.meier

  Hey all, I've started developing Android apps a couple of months ago, and have a few under my belt. While I can tolerate Java enough to keep developing, I was wondering what success the community has had getting other languages to run. I've done some investigation as to how other JVM languages work, and it appears Dalvik messes them up pretty hard. Clojure seems unable to run, Scala seems to be one of the most successful. JRuby has also had some luck, but they caution against anything major. I've also checked out Scheme via Moby and Kawa, both of which seem to have some promise. What luck have any of you had? Languages I'm missing, misrepresenting? Any non-"Hello World" apps you've written in non-Java? Any snags in trying to get another language to run (e.g. "as long as you don't use continuations, you're fine in X Scheme"). Any particular snags in developing apps non-Java, once you get them to run? Thanks, hope you well ^_^

  Read the article

• Perform case-insensitive lookup on an Array in MongoDB?

  - by Hal

  So, I've decided to get my feet wet with MongoDB and love it so far. It seems very fast and flexible which is great. But, I'm still going through the initial learning curve and as such, I'm spending hours digging for info on the most basic things. I've search throughout the MongoDB online documentation and have spent hours Googling through pages without any mention of this. I know Mongo is still quite new (v1.x) so it explains why there isn't much information yet. I've even trying looking for books on Mongo without much luck. So yes, I've tried to RTFM with no luck, so, now I turn to you. I have an Array of various Hashtags nested in each document (ie: #apples, #oranges, #Apples, #APPLES) and I would like to perform a case-insensitive find() to access all the documents containing apples in any case. It seems that find does support some regex with /i, but I can't seem to get this working either. Anyway, I hope this is a quick answer for someone. Here's my existing call in PHP which is case sensitive: $cursor = $collection->find(array( "hashtags" => array("#".$keyword)))->sort(array('$natural' => -1))->limit(10); Help?

  Read the article

• Programmatically modifying a file on Windows Server 2008 (Web Ed.)

  - by Tom

  I have written a .NET 2008 application, incorporating Microsoft.Office.Interop.Excel, that modifies an existing Excel 2007 spreadsheet. It works perfectly on my WinXP development computer. When I upload the app to a Microsoft Web Server 2008, it opens the file and reads from the file, but when the app tries to save the file, it throws this exception: "System.Runtime.InteropServices.COMException (0x800A03EC): 'july2009.xlsx' is read-only. To save a copy, click OK, then give the workbook a new name in the Save As dialog box." The file is NOT read-only, nor is it opened by any other user or app. The app and the Excel file both reside on the D: (data-only) drive. My first instinct was to look at file permissions. When nothing else worked, I literally created a temporary Group, added EVERY user and security entity to it and granted the group full control of the entire D: drive. No luck. Then I tried manually elevating the permission by running my app as administrator. No luck. Finally, I copied the file to my XP development computer and ran the app there. Of course it worked perfectly. Can anyone please tell me how to give my program permission to edit a file on Server 2008? Thanks!

  Read the article

• Latex: Convert "Comment" into "Marginal Note"

  - by diegos

  Hi, using LyX I'm trying to convert the "comments" into "marginal notes". I tried several things but without luck. The best shot was like this: \makeatletter \@ifundefined{comment}{}{% \renewenvironment{comment}[1]% {\begingroup\marginpar{\bgroup#1\egroup}}% {\endgroup}} \makeatother or like this: \@ifundefined{comment}{}{% \renewenvironment{comment}% {\marginpar{}% {}}% But what I get is only the first character of the text converted. Like in this image: IMAGE MARGINAL NOTE I searched a lot trying to find how to solve this but without luck. I found the explanation of what is happening: Unexpected Output Only one character is in the new font You thought you changed font over a selection of text, but only the first character has come out in the new font. You have most probably used a command instead of a declaration. The command should take the text as its argument. If you don't group the text, only the first character will be passed as the argument. What I don't know and wasn't able to find is how to group the text. Hope someone could help me :-) Many thanks. Best Regards, Diego (diegostex)

  Read the article

• Setting MinimumSize Attribute for a Control in a TFS WorkItem

  - by Jay Yother

  Tools used: Visual Studio 2008 SP1 Team Explorer Team Foundation Server Power Tools October 2008 Release. Using the Process Editor in Visual Studio, I am attempting to set the MinimumSize attribute for a control in a WorkItem template to make the default size of the input area larger. I am setting the attribute according to this website: http://msmvps.com/blogs/vstsblog/archive/2007/07/07/undocumented-attributes-for-controlling-the-work-item-form-layout.aspx No matter what I set this attribute to it has no affect. I have tried setting the attribute with and without surrounding (). I've tried different capitalization of the attribute but no luck. I have verified that the MinimumSize attribute is being correctly set in the associated xml file. The control (HtmlFieldControl) is currently setup as the second child on a Tab Page. (The first control is also an HtmlFieldControl.) I've tried adding a group to the Tab Page such that the hierarchy is TabPage-Group-Column-Control with no success. I've also tried setting the attribute for the first control with no luck. Any idea what I am doing wrong?

  Read the article

• Java problem: Could not find main class HelloWorld

  - by Newbie

  I am new to java(a real novice). I installed Java 1.7.0 in the following folder C:\Program Files\Java The environment variable which I set are CLASSPATH : C:\Program Files\Java\jdk1.7.0\jre\lib\rt.jar; Path : C:\Program Files\Java\jdk1.7.0\bin; JAVA_HOME : C:\Program Files\Java; I have presented here the class names which are in my system. Next I wrote a program(HelloWorld.java) import java.io.*; class HelloWorld { public static void main(String[] args) { System.out.println("Hello World!"); } } When I am compiling using javac HelloWorld.java it is compiling fine. But after I issue java HelloWorld I am encountering the below error Error: Could not find main class HelloWorld Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:198) Caused by: java.lang.ClassNotFoundException: HelloWorld at java.net.URLClassLoader$1.run(URLClassLoader.java:299) at java.net.URLClassLoader$1.run(URLClassLoader.java:288) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:287) at java.lang.ClassLoader.loadClass(ClassLoader.java:422) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:325) at java.lang.ClassLoader.loadClass(ClassLoader.java:355) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:195) After a bit of google search I found that may be something wrong in the environment variable. I tried to play with that but no luck. I know that it may be a very simple thing for the real java developers(actually basic) but for me as of now no luck! I even RESTARTED the machine and then again I tried to run but with same fate. OS: Windows XP(Version 2002) with Service pack 3 Help needed . Thanks .

  Read the article

• Clearing input text feilds when clicked on in Flash (AS 2.0)

  - by rickstyphilis

  I have a problem where I want a text field that by default has the word NAME in it, to become empty when a user clicks on it. The text field has the instance name 'nam' and is inside a movie with the instance name 'input_text'. I've searched around and found samples of code where everyone keeps suggesting this: textboxinstancename.onSetFocus = function() { textboxinstancename.text = ""; }; should work. It seems to work for everyone else but me. I've tried using the following on the first frame of the 'input_text' movie with no luck: this.input_text.nam.onSetFocus = function() { this.input_text.nam.text = "" } I've tried putting this on the first frame of the scene, again with no result: _root.input_text.nam.onSetFocus = function() { _root.input_text.nam.text = "" } I've tried this in the same manner as the last respectively with both 'this' on the instance and '_root' on the scene (denoted by x): x.input_text.nam.onSetFocus = function() { if (x.input_text.nam.text == "NAME") { x.input_text.nam.text = ""; } }; Still no luck. Can anyone tell me what I might be doing wrong?

  Read the article

• problem when cloning jQuery UI datepicker

  - by h3

  I have a div in which there is a datepicker. I use something like this to clone it: mydiv = $('#someDiv'); // works fine so far mydiv.find('input.datefield').datepicker(); // clone without the events and insert newDiv = myDiv.clone(false).insertAfter(myDiv); // datepicker won't re-init if this class is present newDiv.find('.hadDatepicker').removeClass('hadDatepicker'); // reinitialize datepicker newDiv.find('input.datefield').datepicker(); This is a stripped down version of my code. It works and the calendar shows up as expected where it is expected .. but when a date is clicked, the previous datepicker's value gets updated.. (the one from which it was cloned). I've tried to destroy the (inexisting) instance before like this: newDiv.find('input.datefield').datepicker('destroy').datepicker(); No luck .. I've checked how it keeps track of instances and manually cleared the data like this: newDiv.find('input.datefield').data('datepicker', false).datepicker('destroy').datepicker(); Still no luck. What I don't understand is that only the date selection behavior is buggy, everything else works as expected. I really don't know what else to check now ..

  Read the article

• How to debug a Gruntfile with breakpoints using node-inspector?

  - by Kris Hollenbeck

  So I have spent the past couple days trying to get this to work with no luck. Most of the solutions I have found seem to work "okay" for debugging node applications. But I haven't had much luck debugging grunt stand alone. I would like to be able to set breakpoints in my gruntfile and either step through the code with either the browser or an IDE. I have tried the following: Debugging using intelliJ IDE Using Grunt Console (Process finished with exit code 6) Debugging with Nodeeclipse (This sort of works okay but doesn't hit the breakpoints set in eclipse, not very intuitive) Debugging using node-inspector (This one also sort of works. I can step through a little ways using F11 and F10 in chrome. But eventually it just crashes. Using F8 to skip to break point never works.) ERROR MESSAGE USING NODE-INSPECTOR So currently node-inspector feels like it has gotten me the closest to what I want. To get here I did the following: From my grunt directory I ran the following commands: grunt node-inspector node --debug-brk Gruntfile.js And then from there I went to localhost:8080/debug?port=5858 to debug my Gruntfile.js. But like I mentioned above, as soon as I hit F8 to skip to breakpoint it crashes with the above error. Has anybody had any success using this method to try to debug a Gruntfile? So far from my search efforts I have not found a very well documented way of doing this. So hopefully this will be useful or beneficial information for future users. Also I am using Windows 7 by the way. Thanks in advance.

  Read the article

• How to direct link to an attribute set?

  - by monocat

  I have created attributes; “Shop by Type” and “Shop by Color”. They work great within the layered navigation and extended search. I’ve designed graphics and placed them in the home page and would like to link to the respective attribute’s assigned products. Been searching the webs, but so far have been unsuccessful. If there’s no direct possible way, the next method would be creating cms pages and linking to it directly. How can I display products that are assigned to a specific attribute? Specifically “Multiple Select” types. I know you guys prefer at least some attempts, but as mentioned, been playing with it with no luck. I would appreciate some kind of starting point. Happy Holidays! Edit: I was able to put together this code that lists all the products assigned to said category id. Tried to filter it down where it only displays products that have an assigned same attribute with no luck yet. Any ideas? <?php $cat_id = 123; // category id $category = Mage::getModel('catalog/category')->load($cat_id); $_products = $category->getProductCollection() ->addAttributeToSelect('shop_by_color'); if (($this->getProductCollection()) && $_products->getSize()): ?> By the way, $cat_id is a sub category of root. Is there an easier way to point to it instead of using direct id number?

  Read the article

• Help- CSS styles for text links also affecting image links

  - by blabus

  I've been working on this one for about an hour now, and I'm about ready to pull my hair out. What seems like it should be a simple one or two lines of CSS apparently isn't. I have a Posterous blog with a custom theme I designed for a client, viewable here: http://phar-ma.com/ I obviously use CSS to style the text links in the posts. My problem is, the same styles are also being applied to images that have a larger version to view, since Posterous automatically turns them into links to the larger versions (the smaller images aren't turned into links). So basically I need to figure out how the return the styling of the link images to the same as the non-link images. Right now they have weird spacing and borders around them (because of the styles for the text links) and those change when you hover over them. They're also not centered correctly. I've tried just about every piece of CSS code I know, and I've had absolutely no luck. I also searched on Google and found this: http://perishablepress.com/press/2008/10/14/css-remove-link-underlines-borders-linked-images/ but still no luck with that either. So, if anyone has any ideas, I'd appreciate it. Thanks!

  Read the article

• How to set logging level for JDBCDriverLogging

  - by Scott

  I am trying to change the logging level to stop showing millions of this: <May 26, 2010 10:26:02 AM EDT> <Debug> <JDBCDriverLogging> <000000> <2336: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | |> I have tried adding this to my java line: -Djava.util.logging.config.file=/foo/bar/logging.properties With this as my logging.properties file: handlers = java.util.logging.ConsoleHandler .level = OFF java.util.logging.ConsoleHandler.level = INFO No luck. I have tried this: Logger logger = Logger.getLogger("com.microsoft.sqlserver.jdbc"); Handler handler = new ConsoleHandler(); handler.setLevel(Level.INFO); logger.addHandler(handler); logger.setLevel(Level.INFO); logger.setUseParentHandlers(false); No luck. I have searched around and all ideas center around one of these two options, so I must be doing something else wrong I am using jtds-1.2.2.jar. Thanks for any suggestions.

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >