Search Results

Search found 21130 results on 846 pages for 'nfs client'.

Page 804/846 | < Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >

• Suggestions for designing large-scale Java webapp from the group up

  - by Chris Thompson

  Hi all, I'm about to start developing a large-scale system and I'm struggling with which direction to proceed. I've done plenty of Java web apps before and I have plenty of experience with servlet containers and GWT and some experience with Spring. The problem is most of my webapps have been thrown together just to be a proof of concept and what I'm struggling with is what set of frameworks to use. I need to have both a browser based application as well as a web service designed to support access from mobile devices (Android and iPhone for now). Ideally, I'd like to design this system in such a way that I don't end up rewriting all of my servlets for each client (browser and phone) although I don't mind having some small checks in there to properly format the data. In addition, although I'm the only developer now, that won't necessarily be the case down the road and I'd like to design something that scales well both with regards to traffic and number of developers (isn't just a nightmare to maintain). So where I am now is planning on using GWT to design the browser-based interface but I'm struggling with how to reuse that code with to present the interface (most likely xml) for the mobile devices. Using GWT RPC would, I think, make it relatively easy to do all of the AJAX in the browser, but might make generating xml for the mobile phones difficult. In addition, I like the idea of using something like Hibernate for persistence and Spring Security to secure the whole thing. Again, I'm not sure how well those will cooperate with GWT (I think Hibernate should be fine...) There's obviously a lot more to this than I've presented here, but I've tried to give you the 5-minute overview. I'm a bit stumped and was wondering if anybody in the community had any experience starting from this place. Does what I'm trying to do make sense? Is it realistic? I have no doubt I can make all of these frameworks speak the same language, I'm just wondering if it's worth my time to fight with them. Also, am I missing a framework that would be really beneficial? Thanks in advance and sorry for the relatively broad question... Chris

  Read the article

• GWT styles not applying

  - by sernaferna

  I'm creating a GWT application that uses UiBinder, and I've come across a bizarre problem where styles aren't applying to my elements--until I refresh the browser, and then the styles briefly get applied, in that fraction of a second before the page refreshes. In other words: Open page; none of my defined styles are used. Hit Refresh For a fraction of a second the styles are used, before the page goes blank The page reloads, without the styles again I'm going to include my entire *ui.xml file, because it's not too big. <!DOCTYPE ui:UiBinder SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent"> <ui:UiBinder xmlns:ui="urn:ui:com.google.gwt.uibinder" xmlns:g="urn:import:com.google.gwt.user.client.ui"> <ui:style> .idLabelStyle { font-weight: bold; text-align: center; width: 100px; border-style: solid; border-width: 1px; margin-right: 5px; } .nameLabelStyle { font-weight: bold; text-align: center; width: 500px; border-style: solid; border-width: 1px; margin-right: 5px; } .addressLabelStyle { font-weight: bold; text-align: center; width: 500px; border-style: solid; border-width: 1px; } </ui:style> <g:HTMLPanel> <g:HorizontalPanel> <g:Label addStyleNames="{style.idLabelStyle}">ID</g:Label> <g:Label addStyleNames="{style.nameLabelStyle}">Name</g:Label> <g:Label addStyleNames="{style.addressLabelStyle}">Address</g:Label> </g:HorizontalPanel> </g:HTMLPanel> </ui:UiBinder> I really hope I'm missing something simple.

  Read the article

• More efficient way of updating UI from Service than intents?

  - by Donal Rafferty

  I currently have a Service in Android that is a sample VOIP client so it listens out for SIP messages and if it recieves one it starts up an Activity screen with UI components. Then the following SIP messages determine what the Activity is to display on the screen. For example if its an incoming call it will display Answer or Reject or an outgoing call it will show a dialling screen. At the minute I use Intents to let the Activity know what state it should display. An example is as follows: Intent i = new Intent(); i.setAction(SIPEngine.SIP_TRYING_INTENT); i.putExtra("com.net.INCOMING", true); sendBroadcast(i); Intent x = new Intent(); x.setAction(CallManager.SIP_INCOMING_CALL_INTENT); sendBroadcast(x); Log.d("INTENT SENT", "INTENT SENT INCOMING CALL AFTER PROCESSINVITE"); So the activity will have a broadcast reciever registered for these intents and will switch its state according to the last intent it received. Sample code as follows: SipCallListener = new BroadcastReceiver(){ @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); if(SIPEngine.SIP_RINGING_INTENT.equals(action)){ Log.d("cda ", "Got RINGING action SIPENGINE"); ringingSetup(); } if(CallManager.SIP_INCOMING_CALL_INTENT.equals(action)){ Log.d("cda ", "Got PHONE RINGING action"); incomingCallSetup(); } } }; IntentFilter filter = new IntentFilter(CallManager.SIP_INCOMING_CALL_INTENT); filter.addAction(CallManager.SIP_RINGING_CALL_INTENT); registerReceiver(SipCallListener, filter); This works however it seems like it is not very efficient, the Intents will get broadcast system wide and Intents having to fire for different states seems like it could become inefficient the more I have to include as well as adding complexity. So I was wondering if there is a different more efficient and cleaner way to do this? Is there a way to keep Intents broadcasting only inside an application? Would callbacks be a better idea? If so why and in what way should they be implemented?

  Read the article

• XmlDataProvider and XPath bindings don't allow default namespace of XML data?

  - by Andy Dent

  I am struggling to work out how to use default namespaces with XmlDataProvider and XPath bindings. There's an ugly answer using local-name <Binding XPath="*[local-name()='Name']" /> but that is not acceptable to the client who wants this XAML to be highly maintainable. The fallback is to force them to use non-default namespaces in the report XML but that is an undesirable solution. The XML report file looks like the following. It will only work if I remove xmlns="http://www.acme.com/xml/schemas/report so there is no default namespace. <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type='text/xsl' href='PreviewReportImages.xsl'?> <Report xsl:schemaLocation="http://www.acme.com/xml/schemas/report BlahReport.xsd" xmlns:xsl="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.acme.com/xml/schemas/report"> <Service>Muncher</Service> <Analysis> <Date>27 Apr 2010</Date> <Time>0:09</Time> <Authoriser>Service Centre Manager</Authoriser> Which I am presenting in a window with XAML: <Window x:Class="AcmeTest.ReportPreview" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="ReportPreview" Height="300" Width="300" > <Window.Resources> <XmlDataProvider x:Key="Data"/> </Window.Resources> <StackPanel Orientation="Vertical" DataContext="{Binding Source={StaticResource Data}, XPath=Report}"> <TextBlock Text="{Binding XPath=Service}"/> </StackPanel> </Window> with code-behind used to load an XmlDocument into the XmlDataProvider (seems the only way to have loading from a file or object varying at runtime). public partial class ReportPreview : Window { private void InitXmlProvider(XmlDocument doc) { XmlDataProvider xd = (XmlDataProvider)Resources["Data"]; xd.Document = doc; } public ReportPreview(XmlDocument doc) { InitializeComponent(); InitXmlProvider(doc); } public ReportPreview(String reportPath) { InitializeComponent(); var doc = new XmlDocument(); doc.Load(reportPath); InitXmlProvider(doc); } }

  Read the article

• App.config in WCF Library and its Windows Service Host

  - by inutan

  Hello there, I have two Services called TemplateService, TemplateReportService (both defined in one WCF Service Library) to be exposed to the client application. And, I am trying to host these services under Windows Service. Can anyone please guide me if App.config in Windows Service will be same as the one in WCF Library? Here is my app.config in WCF Library: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <system.serviceModel> <services> <service behaviorConfiguration="ReportingComponentLibrary.TemplateServiceBehavior" name="ReportingComponentLibrary.TemplateService"> <endpoint address="" binding="wsHttpBinding" contract="ReportingComponentLibrary.ITemplateService" > <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" ></endpoint> <host> <baseAddresses> <add baseAddress="http://localhost:8080/ReportingComponentLibrary/TemplateService/" /> </baseAddresses> </host> </service> <service behaviorConfiguration="ReportingComponentLibrary.TemplateServiceBehavior" name="ReportingComponentLibrary.TemplateReportService"> <endpoint address="" binding="wsHttpBinding" contract="ReportingComponentLibrary.ITemplateReportService" > <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="http://localhost:8080/ReportingComponentLibrary/TemplateReportService/" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="ReportingComponentLibrary.TemplateServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> So, the App.config in my Windows Service(Where I am hosting above two services) will be same as above or there are only some particular sections that I need to move. Please guide. Thank you!

  Read the article

• Generate reasonable length license key with asymmetric encryption?

  - by starkos

  I've been looking at this all day. I probably should have walked away from it hours ago; I might be missing something obvious at this point. Short version: Is there a way to generate and boil down an asymmetrically encrypted hash to a reasonable number of unambiguous, human readable characters? Long version: I want to generate license keys for my software. I would like these keys to be of a reasonable length (25-36 characters) and easily read and entered by a human (so avoid ambiguous characters like the number 0 and the capital letter O). Finally--and this seems to be the kicker--I'd really like to use asymmetric encryption to make it more difficult to generate new keys. I've got the general approach: concatenate my information (user name, product version, a salt) into a string and generate a SHA1() hash from that, then encrypt the hash with my private key. On the client, build the SHA1() hash from the same information, then decrypt the license with the public key and see if I've got a match. Since this is a Mac app, I looked at AquaticPrime, but that generates a relatively large license file rather than a string. I can work with that if I must, but as a user I really like the convenience of a license key that I can read and print. I also looked at CocoaFob which does generate a key, but it is so long that I'd want to deliver it as a file anyway. I fooled around with OpenSSL for a while but couldn't come up with anything of a reasonable length. So...am I missing something obvious here? Is there a way to generate and boil down an asymmetrically encrypted hash to a reasonable number of unambiguous, human readable characters? I'm open to buying a solution. But I work on a number of different of platforms, so I'd want something portable. Everything I've looked at so far has been platform specific. Many, many thanks for a solution! PS - Yes, I know it will still be cracked. I'm trying to come up with something reasonable that, as a user, I would still find friendly.

  Read the article

• Consuming SharePoint Web Services fails when behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. The normal -dhttp.proxyHost ... settings does not seam to help any. But I have found that by creating a ProxySelector class and setting it as default, I can regain access to the authentication web service, but I still can't retrieve the list of web sites from the SharePoint server. Anyone have any experience on how to make this work? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text When running the code from a network behind a proxy server, I successfully retrieve the Authentication mode from the server, but the request for the Web Site list generates an exception originating at: com.sun.xml.internal.ws.transport.http.client .HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:201) The output from the source when no proxy is on the network is listed below: Successfully retrieved the SharePoint WebService response for Authentication SharePoint authentication method is: WINDOWS Calling Web Service to retrieve list of web site. Web Service call response: -------------- XML START -------------- <Webs xmlns="http://schemas.microsoft.com/sharepoint/soap/"> <Web Title="Collaboration Lab" Url="http://host.domain.com/collaboration"/> <Web Title="Global Data Lists" Url="http://host.domain.com/global_data_lists"/> <Web Title="Landing" Url="http://host.domain.com/Landing"/> <Web Title="SharePoint HelpDesk" Url="http://host.domain.com/helpdesk"/> <Web Title="Program Management" Url="http://host.domain.com/programmanagement"/> <Web Title="Project Site" Url="http://host.domain.com/Project Site"/> <Web Title="SharePoint Administration Tools" Url="http://host.domain.com/admin"/> <Web Title="Space Management Project" Url="http://host.domain.com/spacemgmt"/> </Webs> -------------- XML END -------------- Br Jan

  Read the article

• TinyMCE is modifying the XHTML 1.0 Strict HTML I input. How can I stop it?

  - by Matt

  The code I want to have saved through TinyMCE is as follows: <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="90" id="homepage-banner"> <param name="movie" value="/images/header.swf" /> <param name="wmode" value="transparent" /> <!--[if !IE]>--> <object type="application/x-shockwave-flash" data="/images/header.swf" width="550" height="90"> <param name="wmode" value="transparent" /> <!--<![endif]--> <img src="/images/header.jpg" width="550" height="90" alt="" border="0" /> <!--[if !IE]>--> </object> <!--<![endif]--> </object> Sadly, what I end up with is: <object data="/images/header.swf" height="90" type="application/x-shockwave-flash" width="550"> <param name="id" value="homepage-banner" /> <param name="wmode" value="transparent" /> <param name="src" value="/images/header.swf" /> </object> The purpose of the stripped parts of the code is to provide a fallback image if flash is not available on the client. In my tinyMCE.init({ ... }); I am using verify_html: true and valid_elements is set as per this forum topic whereby all valid XHTML 1.0 Strict elements are allowed. I have checked and the above code does comply with the XHTML 1.0 Strict standard. I have tried just setting verify_html to false but it had no effect. How can TinyMCE be configured to leave my HTML alone?!

  Read the article

• Flex/Flash 4 datagrid literally displays XML

  - by Setori

  Problem: Flex/Flash4 client (built with FlashBuilder4) displays the xml sent from the server exactly as is - the datagrid keeps the format of the xml. I need the datagrid to parse the input and place the data in the correct rows and columns of the datagrid. flow: click on a date in the tree and it makes a server request for batch information in xml form. Using a CallResponder I then update the datagrid's dataProvider. [code] <fx:Script> <![CDATA[ import mx.controls.Alert; [Bindable]public var selectedTreeNode:XML; public function taskTreeChanged(event:Event):void { selectedTreeNode=Tree(event.target).selectedItem as XML; var searchHubId:String = selectedTreeNode.@hub; var searchDate:String = selectedTreeNode.@lbl; if((searchHubId == "") || (searchDate == "")){ return; } findShipmentBatches(searchDate,searchHubId); } protected function findShipmentBatches(searchDate:String, searchHubId:String):void{ findShipmentBatchesResult.token = actWs.findShipmentBatches(searchDate, searchHubId); } protected function updateBatchDataGridDP():void{ task_list_dg.dataProvider = findShipmentBatchesResult.lastResult; } ]]> </fx:Script> <fx:Declarations> <actws:ActWs id="actWs" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/> <s:CallResponder id="findShipmentBatchesResult" result="updateBatchDataGridDP()"/> </fx:Declarations> <mx:AdvancedDataGrid id="task_list_dg" width="100%" height="95%" paddingLeft="0" paddingTop="0" paddingBottom="0"> <mx:columns> <mx:AdvancedDataGridColumn headerText="Receiving date" dataField="rd"/> <mx:AdvancedDataGridColumn headerText="Msg type" dataField="mt"/> <mx:AdvancedDataGridColumn headerText="SSD" dataField="ssd"/> <mx:AdvancedDataGridColumn headerText="Shipping site" dataField="sss"/> <mx:AdvancedDataGridColumn headerText="File name" dataField="fn"/> <mx:AdvancedDataGridColumn headerText="Batch number" dataField="bn"/> </mx:columns> </mx:AdvancedDataGrid> [/code] I cannot upload a pic, but this is the xml: [code] 2010-04-23 16:35:51.0 PRESHIP 2010-02-15 00:00:00.0 100000009 DF-Ocean-PRESHIPSUM-Quanta-PACT-EMEA-Scheduled Ship Date 20100215.csv 10053 [/code] and the xml is pretty much displayed exactly as is in the datagrid columns... I would appreciate your assistance.

  Read the article

• Upload large files via a webpage

  - by Hultner

  What way is the best way to let users upload large files from there webbrowser to a server. I'm talking 200MB+ possible up to a few gigatyes. I have been thinking of a few possible solutions to the problem (not tried them yet) and this is basically the things I came up with. Server download speed will not be a problem but the users connection possibly could. Having some sort of applet on the client side written in Java or Flash which sends the file in parts (is this possible with an applet) to a php/other script on the server and a checksum+ some other info about the file. On the server scripts all the parts and the info file is saved in a temporary directory wich has a unique name based on the checksum of the file and the ip of the user. When the last chunk is sent the applet sends a signal to the server saying it's finished and the server put the file together in the right location. If a chunk doesn't match the checksum for that part the server will send a response to the applet telling it to reupload that chunk. I don't know how important the checksum checking is since it's all tcpackages, someone with more insigth migth be able to answer on that. This is probably the worst way, changing the settings on your server to allow huge fileuploads via an inputfiel. Do it like a normal transfer. User an uploadmanager which does pretty much the same thing as applet i mentioned above. Pros of the first is probably that it would most likely be rather secure, you could show progress as well and possibly resume an upload if ip hasn't changed and do a threaded upload of the chunks. Cons of the first is that the user will need flash/java for it to work. Pros of the 2nd is that it will pretty much work for everyone but cons are big, first there's no way resuming an intruppted download and if something is wrong the whole file would have to be reuploaded is a few of cons. For the third one the pros is pretty muc the same as for the first but the cons is that the user would have to download an application to their computer and run and the application will have to be have to be compatible with their computer and OS. Another way may be a combination of two. Lets say an applet for bigger or more files and a simple input which is rather restricted to maybe max 10-20MB for smaller files and comability. There are probably other much smarter ways to tackle this and that's why I'm asking for advice here on SO.

  Read the article

• GUI Application becomes unresponsive while http request is being done

  - by JW

  I have just made my first proper little desktop GUI application that basically wraps a GUI (php-gtk) interface around a SimpleTest Web Test case to make it act as a remote testing client. Each time the local The Web Test case runs, it sends an HTTP request to another SimpleTest case (that has an XHTML interface) sitting on my server. The application, allows me to run one local test that collates information from multiple remote tests. It just has a 'Start Test' button, 'Stop Test' button and a setting to increase/decrease the number of remote tests conducted in each HTTP Request. Each test-run takes about an hour to complete. The trouble is, most of the time the application is making http requests. Furthermore, whenever an HTTP Request is being made, the application's GUI is unresponsive. I have taken to making the application wait a few seconds (iterating through the Gtk::main_iteration ) between requests in order to give the user time to re-size the window, press the Stop button, etc. But, this makes the whole test run take a lot a longer than is necessary. <?php require_once('simpletest/web_tester.php'); class TestRemoteTestingClient extends WebTestCase { function testRunIterations() { ... $this->assertTrue($this->get($nextUrl), 'getting from pointer:'. $this->_remoteMementoPointer); $this->assertResponse(200, "checking response for " . $nextUrl ); $this->assertText('RemoteNodeGreen'); $this->doGtkIterationsForMinNSeconds($secs); ... } public function doGtkIterationsForMinNSeconds($secs) { $this->appendStatusMessage("Waiting " . $secs); $start = time(); $end = $start + $secs; while( (time() < $end) ) { $this->appendStatusMessage("Waiting " . ($end - time())); while(gtk::events_pending()) Gtk::main_iteration(); } } } Is there a way to keep the application responsive whilst, at the same time making an HTTP request? I am considering splitting the application into two, where: Test Controller Application - Acts as a settings-writer / report-reader and this writes to settings file and reads a report file. Test Runner Application - Acts as a settings-reader / report-writer and, for each iteration reads the settings file, Runs the test, then write a report. So to tell it to close down - I'd: Press the Stop Button on the 'Test Controller Application', which writes to the settings file, which is read by the 'Test Runner Application' which stops, then writes to the report file to say it stopped the 'Test Controller Application' reads the report and updates the status and so on... However, before I go ahead and split the application in two - I am wondering if there is any other obvious way to deal with, this issue. I suspect it is probably quite common and a well-trodden path. Also is there an easier way to send messages between two applications?

  Read the article

• Is it possible to use XStream with an abstract node?

  - by Dan Watling

  My client application is making calls to a service that returns a common "root" XML, but a different result node. The "root" XML contains possible error codes. Is it possible to use XStream in this scenario? Example: public class RootNode { ErrorInfo errorInfo; BaseResult result; ... } public class ErrorInfo { String message; ... } public abstract BaseResult { } public class SearchResult extends BaseResult { List<Object> searchResults; ... } public class AccountResult extends BaseResult { String name; ... } The XML coming back could be one of two formats: <root> <errorInfo><message>...</message></errorInfo> <result> <searchResults>...</searchResults> </result> </root> OR <root> <errorInfo><message>...</message></errorInfo> <result> <name>...</name> </result> </root> I have set up my XStream object as follows: XStream x = new XStream(); x.alias("root", Root.class); x.alias("errorInfo", ErrorInfo.class); x.alias("result", <SearchResult.class OR AccountResult.class depending on what I am expecting back>); Of course, when I run this I receive an error telling me XStream cannot instantiate the base class (BaseResult). For fun, I also converted the BaseResult into an interface but received a similar error. I've looked through XStream's documentation and it isn't clear to me how to handle a situation like the one I just described. Is it even possible to do using XStream? Thanks, -Dan

  Read the article

• ASP.NET Web Service - how to handle special characters in strings?

  - by Vlorg

  To show this fundamental issue in .NET and the reason for this question, I have written a simple test web service with one method (EditString), and a consumer console app that calls it. They are both standard web service/console applications created via File/New Project, etc., so I won't list the whole code - just the methods in question: Web method: [WebMethod] public string EditString(string s, bool useSpecial) { return s + (useSpecial ? ((char)19).ToString() : ""); } [You can see it simply returns the string s if useSpecial is false. If useSpecial is true, it returns s + char 19.] Console app: TestService.Service1 service = new SCTestConsumer.TestService.Service1(); string response1 = service.EditString("hello", false); Console.WriteLine(response1); string response2 = service.EditString("hello", true); // fails! Console.WriteLine(response2); [The second response fails, because the method returns hello + a special character (ascii code 19 for argument's sake).] The error is: There is an error in XML document (1, 287) Inner exception: "'', hexadecimal value 0x13, is an invalid character. Line 1, position 287." A few points worth mentioning: The web method itself WORKS FINE when browsing directly to the ASMX file (e.g. http://localhost:2065/service1.asmx), and running the method through this (with the same parameters as in the console application) - i.e. displays XML with the string hello + char 19. Checking the serialized XML in other ways shows the special character is being encoded properly (the SERVER SIDE seems to be ok which is GOOD) So it seems the CLIENT SIDE has the issue - i.e. the .NET generated proxy class code doesn't handle special characters This is part of a bigger project where objects are passed in and out of the web methods - that contain string attributes - these are what need to work properly. i.e. we're de/serializing classes. Any suggestions for a workaround and how to implement it? Or have I completely missed something really obvious!!? Thanks in advance... PS. I've not had much luck with getting it to use CDATA tags (does .NET support these out of the box?).

  Read the article

• What to do when you need more verbs in REST

  - by Richard Levasseur

  There is another similar question to mine, but the discussion veered away from the problem I'm encounting. Say I have a system that deals with expense reports (ER). You can create and edit them, add attachments, and approve/reject them. An expense report might look like this: GET /er/1 => {"title": "Trip to NY", "totalcost": "400 USD", "comments": [ "john: Please add the total cost", "mike: done, can you approve it now?" ], "approvals": [ {"john": "Pending"}, {"finance-group": "Pending"}] } That looks fine, right? Thats what an expense report document looks like. If you want to update it, you can do this: POST /er/1 {"title": "Trip to NY 2010"} If you want to approve it, you can do this: POST /er/1/approval {"approved": true} But, what if you want to update the report and approve it at the same time? How do we do that? If you only wanted to approve, then doing a POST to something like /er/1/approval makes sense. We could put a flag in the URL, POST /er/1?approve=1, and send the data changes as the body, but that flag doesn't seem RESTful. We could put special field to be submitted, too, but that seems a bit hacky, too. If we did that, then why not send up data with attributes like set_title or add_to_cost? We could create a new resource for updating and approving, but (1) I can't think of how to name it without verbs, and (2) it doesn't seem right to name a resource based on what actions can be done to it (what happens if we add more actions?) We could have an X-Approve: True|False header, but headers seem like the wrong tool for the job. It'd also be difficult to get set headers without using javascript in a browser. We could use a custom media-type, application/approve+yes, but that seems no better than creating a new resource. We could create a temporary "batch operations" url, /er/1/batch/A. The client then sends multiple requests, perhaps POST /er/1/batch/A to update, then POST /er/1/batch/A/approval to approve, then POST /er/1/batch/A/status to end the batch. On the backend, the server queues up all the batch requests somewhere, then processes them in the same backend-transaction when it receives the "end batch processing" request. The downside with this is, obviously, that it introduces a lot of complexity. So, what is a good, general way to solve the problem of performing multiple actions in a single request? General because its easy to imagine additional actions that might be done in the same request: Suppress or send notifications (to email, chat, another system, whatever) Override some validation (maximum cost, names of dinner attendees) Trigger backend workflow that doesn't have a representation in the document.

  Read the article

• Getting the executed output of an aspx page after a short delay

  - by Ankur

  Hi all, I have an aspx page which has some javascript code like <script> setTimeout("document.write('" + place.address + "');",1); </script> As it is clear from the code it will going to write something on the page after a very short delay of 1 ms. I have created an another page to get the page executed by some query string and get its output. The problem is I can not avoid the delay as simply writing document.write(place.address); will not print anything as it takes a little time to get values so if i set it in setTimeout for delayed output of 1 ms it always return me a value If I request the output from another page using System.Net.WebClient wc = new System.Net.WebClient(); System.IO.StreamReader sr = new System.IO.StreamReader(wc.OpenRead("http://localhost:4859/Default.aspx?lat=" + lat + "&lng=" + lng)); string strData = sr.ReadToEnd(); I get the source code of the document instead of the desired output can anyone help me out for either avoiding that delay or else delayed the client request ouput so that i get a desired value not the source code The js on default.aspx is <script type="text/javascript"> var geocoder; var address; function initialize() { geocoder = new GClientGeocoder(); var qs=new Querystring(); if(qs.get("lat") && qs.get("lng")) { geocoder.getLocations(new GLatLng(qs.get("lat"),qs.get("lng")),showAddress); } else { document.write("Invalid Access Or Not valid lat long is provided."); } } function getAddress(overlay, latlng) { if (latlng != null) { address = latlng; geocoder.getLocations(latlng, showAddress); } } function showAddress(r) { place = r.Placemark[0]; setTimeout("document.write('" + place.address + "');",1); //document.write(place.address); } </script> and the code on requestClient.aspx is as System.Net.WebClient wc = new System.Net.WebClient(); System.IO.StreamReader sr = new System.IO.StreamReader(wc.OpenRead("http://localhost:4859/Default.aspx?lat=" + lat + "&lng=" + lng)); string strData = sr.ReadToEnd();

  Read the article

• facebook login problem

  - by khoyendra

  This is the code which is use for login in facebook but it is go to the finaly block and show my facebook link in browser. i am show from which it go to the finaly block in program. how to login without open browser this example is yack from http://code.google.com/p/facebook-java-api/wiki/Examples try{ MDC.put(ipAddress, req.getRemoteAddr()); HttpServletRequest request = (HttpServletRequest) req; HttpServletResponse response = (HttpServletResponse) res; HttpSession session = request.getSession(true); IFacebookRestClient<Document> userClient = getUserClient(session); if (userClient == null) { logger.debug("User session doesn't have a Facebook API client setup yet. Creating one and storing it in the user's session."); userClient = new FacebookXmlRestClient(api_key, secret); session.setAttribute(FACEBOOK_USER_CLIENT, userClient); } logger.trace("Creating a FacebookWebappHelper, which copies fb_ request param data into the userClient"); FacebookWebappHelper<Document> facebook = new FacebookWebappHelper<Document>(request, response, api_key, secret, userClient); String nextPage = request.getRequestURI(); nextPage = nextPage.substring(nextPage.indexOf("/", 1) + 1); //cut out the first /, the context path and the 2nd / logger.trace(nextPage); boolean redirectOccurred = facebook.requireLogin(nextPage); if (redirectOccurred) { return; //from this pt. send to finaly block and open my facebook page } redirectOccurred = facebook.requireFrame(nextPage); if (redirectOccurred) { return; } long facebookUserID; try { facebookUserID = userClient.users_getLoggedInUser(); } catch (FacebookException ex) { response.sendError(HttpServletResponse.SC_INTERNAL_SERVER_ERROR, "Error while fetching user's facebook ID"); logger.error("Error while getting cached (supplied by request params) value " + "of the user's facebook ID or while fetching it from the Facebook service " + "if the cached value was not present for some reason. Cached value = {}", userClient.getCacheUserId()); return; } MDC.put(facebookUserId, String.valueOf(facebookUserID)); chain.doFilter(request, response); } finally { MDC.remove(ipAddress); MDC.remove(facebookUserId); }

  Read the article

• JbossESB jmsProvider cannot convert IBMMQ JMS Message JMSTextMessage

  - by Himanshu

  I am trying to integrate IBMMQ v6.0.2 with jbossESB. we have local Queue available on IBMMQ on one of our QA QUEUEMANAGER. I am able to listen to the QUEUE using JMSprovider of jboss ESB. As soon as a message (of type jms_text ) is dropped , esb listen to it and pick it up and before it hit the next action it throws following error message. ERROR [JmsComposer] Unsupported JMS message type: com.ibm.jms.JMSTextMessage Here are the steps I followed. jboss-service.mxl : Defined Connection Factory and QUEUE added jars ( com.ibm.mq.* ) to ${jbossesb}/server/${mynode}/lib Added jms lsinterner configuration on jboss-esb.xml Please guide me what I m missing here... Do I need to create custom MessagePlugin ? jboss-esb looks like this <jms-provider name="WSMQ" connection-factory="MQQueueConnectionFactory"> <jms-bus busid="queuestartGwChannel"> <jms-message-filter dest-type="QUEUE" dest-name="wsmq/SerivceOrderQueue" acknowledge-mode ="AUTO_ACKNOWLEDGE" /> </jms-bus> <jms-bus busid="queuestartEsbChannel"> <jms-message-filter dest-type="QUEUE" dest-name="wsmq/SerivceOrderQueue" /> </jms-bus> </jms-provider> jboss-service.xml looks like this <mbean code="jmx.service.wsmq.WSMQConnectionFactory" name="jmx.service.wsmq:service=MQQueueConnectionFactory"> <attribute name="JndiName">MQQueueConnectionFactory</attribute> <attribute name="JMSStyle">Queue</attribute> <attribute name="IsXA">false</attribute> <attribute name="QueueManagerName">SQAT0083</attribute> <attribute name="HostName">111.111.111.111</attribute> <attribute name="Port">1415</attribute> <attribute name="Channel">MYCO.SVRCONN</attribute> <attribute name="TransportType">CLIENT</attribute> <depends>jboss:service=Naming</depends> </mbean> <mbean code="jmx.service.wsmq.WSMQDestination" name="jmx.service.wsmq:service=WSMQRequestQueue"> <attribute name="JndiName">wsmq/SerivceOrderQueue</attribute> <attribute name="JMSStyle">Queue</attribute> <attribute name="QueueManagerName">SQAT0083</attribute> <attribute name="DestinationName">MYCO.SERVICEORDER.QA01.QL01</attribute> <attribute name="TargetClient">MQ</attribute> <depends>jboss:service=Naming</depends> </mbean> I am using jboss-eap-4.3. Really appreciate any help.

  Read the article

• Junit (3.8.1) testing that an exception is thrown (works in unit test, fails when added to a testSui

  - by Mike Cargal

  I'm trying to test that I'm throwing an exception when appropriate. In my test class I have a method similar to the following: public void testParseException() { try { ClientEntitySingleton.getInstance(); fail("should have thrown exception."); } catch (RuntimeException re) { assertEquals( "<exception message>", re.getMessage()); } } This works fine (green bar) whenever I run that single unitTest class. However, when I add that test to a testSuite, I get a red bar Unit test failure reported on the exception. One more thing... it works in the testSuite, if it's the first test in the suite. Actually, I'm doing two of these tests and just figured out that if I make them the first two tests in the suite, all is good, but I get this failure if a "regular" test precedes it. So I have a work-around, but no real answer. Any ideas? Heres'a stack trace of the "failure" java.lang.RuntimeException: ProcEntity client dn="Xxxxxx/Xxxx/XXX" is defined multiple times. at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.addClientEntity(ClientEntitySingleton.java:247) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.startElement(ClientEntitySingleton.java:264) at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.parse(ClientEntitySingleton.java:216) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.reload(ClientEntitySingleton.java:303) at com.someco.someprod.clientEntityManagement.ClientEntitySingleton.setInputSourceProvider(ClientEntitySingleton.java:88) at com.someco.someprod.clientEntityManagement.test.TestClientBase.setUp(TestClientBase.java:17) at com.someco.someprod.clientEntityManagement.test.TestClientEntityDup.setUp(TestClientEntityDup.java:8) at junit.framework.TestCase.runBare(TestCase.java:125) at junit.framework.TestResult$1.protect(TestResult.java:106) at junit.framework.TestResult.runProtected(TestResult.java:124) at junit.framework.TestResult.run(TestResult.java:109) at junit.framework.TestCase.run(TestCase.java:118) at junit.framework.TestSuite.runTest(TestSuite.java:208) at junit.framework.TestSuite.run(TestSuite.java:203) at junit.framework.TestSuite.runTest(TestSuite.java:208) at junit.framework.TestSuite.run(TestSuite.java:203) at org.eclipse.jdt.internal.junit.runner.junit3.JUnit3TestReference.run(JUnit3TestReference.java:128) at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386) at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)

  Read the article

• Java object to XML Elements?

  - by DaveKub

  I'm working on a webservices client app and I have it mostly working. I can retrieve and read data from the third-party webservice fine. Now I need to submit some data and I'm stuck. The classes for the objects I'm retrieving/submitting were generated from XSD files via the xjc tool. The part I'm stuck on is turning one of those objects into an XML tree to submit to the webservice. When I retrieve/send a request from/to the ws, it contains a 'payload' object. This is defined in java code as (partial listing): @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "PayloadType", propOrder = { "compressed", "document", "any", "format" }) public class PayloadType { @XmlElement(name = "Compressed") protected String compressed; @XmlElement(name = "Document") protected List<String> document; @XmlAnyElement protected List<Element> any; protected String format; public List<Element> getAny() { if (any == null) { any = new ArrayList<Element>(); } return this.any; } } The only field I'm concerned with is the 'any' field which contains an XML tree. When I retrieve data from the ws, I read that field with something like this: ('root' is of org.w3c.dom.Element type and is the result of calling 'getAny().get(0)' on the payload object) NodeList nl = root.getElementsByTagName("ns1:Process"); // "ns1:Process" is an XML node to do something with if (nl != null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element proc = (Element) nl.item(i); try { // do something with the 'proc' Element here... } catch (Exception ex) { // handle problems here... } } } Submitting data is where I'm stuck. How do I take a java object created from one of the classes generated from XSD and turn it into an Element object that I can add to the 'any' List of the payload object?? For instance, if I have a DailyData class and I create and populate it with data: DailyData dData = new DailyData(); dData.setID = 34; dData.setValues = "3,5,76,23"; How do I add that 'dData' object to the 'any' List of the payload object? It has to be an Element. Do I do something with a JAXBContext marshaller? I've used that to dump the 'dData' object to the screen to check the XML structure. I'm sure the answer is staring me in the face but I just can't see it! Dave

  Read the article

• Help with storing/accessing user access roles C# Winforms

  - by user222453

  Hello, firstly I would like to thank you in advance for any assistance provided. I am new to software development and have designed several Client/Server applications over the last 12 months or so, I am currently working on a project that involves a user logging in to gain access to the application and I am looking at the most efficient and "simple" method of storing the users permissions once logged in to the application which can be used throughout restricting access to certain tabs on the main form. I have created a static class called "User" detailed below: static class User { public static int _userID; public static string _moduleName; public static string _userName; public static object[] UserData(object[] _dataRow) { _userID = (int)_dataRow[0]; _userName = (string)_dataRow[1]; _moduleName = (string)_dataRow[2]; return _moduleName; } } When the user logs in and they have been authenticated, I wish to store the _moduleName objects in memory so I can control which tabs on the main form tab control they can access, for example; if the user has been assigned the following roles in the database: "Sales Ledger", "Purchase Ledger" they can only see the relevant tabs on the form, by way of using a Switch - Case block once the login form is hidden and the main form is instantiated. I can store the userID and userName variables in the main form once it loads by means of say for example: Here we process the login data from the user: DataAccess _dal = new DataAccess(); switch (_dal.ValidateLogin(txtUserName.Text, txtPassword.Text)) { case DataAccess.ValidationCode.ConnectionFailed: MessageBox.Show("Database Server Connection Failed!"); break; case DataAccess.ValidationCode .LoginFailed: MessageBox.Show("Login Failed!"); _dal.RecordLogin(out errMsg, txtUserName.Text, workstationID, false); break; case DataAccess.ValidationCode .LoginSucceeded: frmMain frmMain = new frmMain(); _dal.GetUserPrivList(out errMsg,2); //< here I access my DB and get the user permissions based on the current login. frmMain.Show(); this.Hide(); break; default: break; } private void frmMain_Load(object sender, EventArgs e) { int UserID = User._userID; } That works fine, however the _modules object contains mutiple permissions/roles depending on what has been set in the database, how can I store the multiple values and access them via a Switch-Case block? Thank you again in advance.

  Read the article

• Connected host failed to respond (internal NAT address)

  - by MostRandom

  I'm writing my first C# web application that connects to an XML based service. It requires that I present a certificate and feed the XML stream. It seems to authenticate properly but then it gives the following error: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.1.10.4:3128 The funny thing is that I'm not on a proxy or anything like that. I'm connecting directly to the internet. At one point I we did use a proxy that with internal NAT address. So my question is: Does Visual Studio have some sort of default proxy setting that I need to change? This IP is no longer used for anything, so I know that I don't need to use any proxy authentication code. using System; using System.Data; using System.Configuration; using System.Collections; using System.Web; using System.Net; using System.Security.Cryptography.X509Certificates; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; namespace WebApplication1 { public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Uri requestURI = new Uri("*site omitted*"); //Create the Request Object HttpWebRequest pageRequest = (HttpWebRequest)WebRequest.Create(requestURI); //After installing the cert on the server export a client cert to the working directory as Deluxe.cer string certFile = "*certificate omitted*"; X509Certificate cert = X509Certificate.CreateFromCertFile(certFile); //Pull in your Data, if it is from an external xml as below or create an xml string with variables if a dynamic post is required. string xmlPath = "*XML omitted*"; System.Xml.XmlDocument passXML = new System.Xml.XmlDocument(); passXML.Load(xmlPath); //XML String with the data needed to pass string postData = passXML.OuterXml; //Set the Request Object parameters pageRequest.ContentType = "application/x-www-form-urlencoded"; pageRequest.Method = "POST"; pageRequest.AllowWriteStreamBuffering = false; pageRequest.AllowAutoRedirect = false; pageRequest.ClientCertificates.Add(cert); postData = "xml_data=" + Server.UrlEncode(postData); pageRequest.ContentLength = postData.Length; //Create the Post Stream Object System.IO.StreamWriter postStream = new System.IO.StreamWriter(pageRequest.GetRequestStream()); //Write the data to the post stream postStream.Write(postData); postStream.Flush(); postStream.Close(); //Set the Response Object HttpWebResponse postResponse = (HttpWebResponse)pageRequest.GetResponse();

  Read the article

• Can you find a pattern to sync files knowing only dates and filenames?

  - by Robert MacLean

  Imagine if you will a operating system that had the following methods for files Create File: Creates (writes) a new file to disk. Calling this if a file exists causes a fault. Update File: Updates an existing file. Call this if a file doesn't exist causes a fault. Read File: Reads data from a file. Enumerate files: Gets all files in a folder. Files themselves in this operating system only have the following meta data: Created Time: The original date and time the file was created, by the Create File method. Modified Time: The date and time the file was last modified by the Update File method. If the file has never been modified, this will equal the Create Time. You have been given the task of writing an application which will sync the files between two directories (lets call them bill and ted) on a machine. However it is not that simple, the client has required that The application never faults (see methods above). That while the application is running the users can add and update files and those will be sync'd next time the application runs. Files can be added to either the ted or bill directories. File names cannot be altered. The application will perform one sync per time it is run. The application must be almost entirely in memory, in other words you cannot create a log of filenames and write that to disk and then check that the next time. The exception to point 6 is that you can store date and times between runs. Each date/time is associated with a key labeled A through J (so you have 10 to use) so you can compare keys between runs. There is no way to catch exceptions in the application. Answer will be accepted based on the following conditions: First answer to meet all requirements will be accepted. If there is no way to meet all requirements, the answer which ensures the smallest amount of missed changes per sync will be accepted. A bounty will be created (100 points) as soon as possible for the prize. The winner will be selected one day before the bounty ends. Please ask questions in the comments and I will gladly update and refine the question on those.

  Read the article

• Learning to create beautiful /next-generation GUI

  - by ShaChris23

  I really want to create a stunning-looking GUI desktop application that looks like, for example: Mac OS X interface Picasa desktop client on windows IPhone apps Office 2007 I've mostly been programming GUI using Qt/Swing/WinForm and I'm tired of creating so plain looking GUI, lol. So I was thinking about diving into stuff like: jQuery WPF/C# iPhone SDK Silverlight Adobe Air/Flex Just to get some ideas on how to create really cool looking UI. Does that sound like a good list? Any developers here that could share what platform they use to create very cool looking desktop app? On a sidenote, I really wonder what developers at Apple / Microsoft use to develop their own cool-looking software. EDIT A lot of responses talk about the importance of usability over "cool-looking".. I totally agree that usability and simplicity are the most important aspects of user interface design. I've been doing GUI development for a while now ( 3 years), so that I understand. But using cool-looking UI also improves user experience + it could make big difference on whether or not your software sells. I mean, otherwise why would Microsoft/Apple try to make their OS UI look "cooler" everytime there's a new version? Why would websites like pragprog.com, or versionsapp.com. make their websites look like that? Basically you kill 2 birds with one stone: stunnning-looking UI + super usability (because it looks simple and intuitive). That is what I'm striving for. And as far as I know, I cannot achieve that using Qt/Winform. Most of the books I have read just show you how to make average-looking (read: 1990's) UI. I want to learn how to create cool-looking UI. And the only place I see cool-looking UIs these days are the technology I list above. I'm not enamored with any technology; but I just want to know how things are done in other technology to see if I could apply them to the technology I'm using, or see if I could use those technology in my line of work. An example: if I were to pick between this UI and this UI, I probably would pick the latter, if just based on looks alone. Functionally, they are just the same UI; they both allow you to keep track of your time. They both contain buttons and textboxes, etc. But the fact that they look different, also differentiate them in terms of attractiveness. So in all, I think the "ice on the cake" is very important. I would say it's the thing you strive for after you are certain you have a totally intuitive, usable UI.

  Read the article

• ASP.NET 2.0 files work in one folder, but NOT in another

  - by Steve

  I am about to leap of a building. I have created an app for a client and all the files are in a folder on their D drive. Now it is time to go production, so I copied all my files and folders to their excisting classic asp folder on the same drive. BUT NOTHING WORKS. The only difference I can see is that DEV does not require HTTPS like the production site. I also made sure all the permissions are the same on both folder. I made sure that the GAC has read rights using the aspnet_regiis tool. I am at the end of my debug knowlegde, could someone please help me out. Here are the error messages I get from the application event log. Failed to initialize the AppDomain:/LM/W3SVC/3/Root Exception: System.Configuration.ConfigurationErrorsException Message: Exception of type 'System.Configuration.ConfigurationErrorsException' was thrown. StackTrace: at System.Web.Configuration.ErrorRuntimeConfig.ErrorConfigRecord.System.Configuration.Internal.IInternalConfigRecord.GetLkgSection(String configKey) at System.Web.Configuration.RuntimeConfigLKG.GetSectionObject(String sectionName) at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index) at System.Web.Configuration.RuntimeConfig.get_HostingEnvironment() at System.Web.Hosting.HostingEnvironment.StartMonitoringForIdleTimeout() at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironment(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironmentAndReportErrors(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ------------------------ Failed to execute the request because the ASP.NET process identity does not have read permissions to the global assembly cache. Error: 0x80131902 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ------------------------- aspnet_wp.exe (PID: 4568) stopped unexpectedly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is the web error message: Server Application Unavailable The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request. Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. Thank you for your help, Steve

  Read the article

• .net List<string>.Remove bug Should I submit a MS Connect bug report on this?

  - by Dean Lunz

  So I was beating my head against a wall for a while before it dawned on me. I have some code that saves a list of names into a text file ala ... System.IO.File.WriteAllLines(dlg.FileName, this.characterNameMasterList.Distinct().ToArray()); The character names can contain special characters. These names come from the wow armory at www.wowarmory.com There are about 26000 names or so saved in the .txt file. The names get saved to the .txt file just fine. I wrote another application that reads these names from that .txt file using this code // download the names from the db var webNames = this.DownloadNames("character"); // filter names and get ones that need to be added to the db var localNames = new List<string>(System.IO.File.ReadAllLines(dlg.FileName)); foreach (var name in webNames) { if (localNames.Contains(name.Trim())) localNames.Remove(name); } return localNames; ... the code downloads a list of names from my website that are already in the db. Then reads the local .txt file and singles out every name that is not yet in the db so it can later add it. The names that get read from the .txt file also get read just fine with no problems. The problem comes in when removing names from the localNames list. localNames is a List type. As soon as localNames.Remove(name) gets called any names in the list that had special characters in them would get corrupted and be converted into ? characters. See for screen cap http://yfrog.com/12badcharsp So i tried doing it another way using ... // download the names from web that are already in the db var webNames = this.DownloadNames("character"); // filter names and get ones that need to be added to the db var localNames = new List<string>(System.IO.File.ReadAllLines(dlg.FileName)); int index = 0; while (index < webNames.Count) { var name = webNames[index++]; var pos = localNames.IndexOf(name.Trim()); if (pos != -1) localNames.RemoveAt(pos); } return localNames; .. But using localNames.RemoveAt also corrupts the items in the list converting special characters into ?. So is this a known bug with the List.remove methods? Does anyone know? Has anyone else had this problem? I also used .NET Reflector to disassemble/inspect the list.remove and list.RemoveAt code and it appear to be calling some external Copy function. Aside from the fact that this is prob not the best way to get a unique list of items from 2 lists am I missing something or should be aware of when using the List.Remove methods ? I am running windows 7 vs2010 and my app is set for .net 4 (no client profile )

  Read the article

< Previous Page | 800 801 802 803 804 805 806 807 808 809 810 811  | Next Page >