Search Results

Search found 81719 results on 3269 pages for 'remote file copy'.

Page 81/3269 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Linux file permissions not being preserved

  - by yellavon

  I am deploying some custom software as root (a necessity for this situation). I set the owner/group to user1:user1 and set all the files to 644 beforehand in shell, then copy and deploy with ant. However, when files get copied over from the deployment directory, the ownership changes back to root and all the files install with 666 permissions. This seems to occur whether the file is overwritten or newly created. I believe there is a way to set an option in cp, mv commands to preserve permissions, but that would be a lot of commands to change. How can I fix this? Is there some setting I can change temporarily for root so the install always preserves the file permissions?

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• Secure copying (file transfer) between two Linux servers in the same datacenter (Linode)

  - by MountainX

  I have two Linodes in the same data center. I want to copy files from one to the other each night or on demand (for about the next month, until this project is finished). So I'm thinking about using rsync. My question is how do I set up the two Linode servers to communicate via private IP addresses securely? Both servers are SSH hardened, they use denyhosts and have a fairly restrictive iptables setup. I know I need to first assign private IP addresses to each server, then configure static networking according to this guide. What is next? What SSH or iptables settings are needed to allow these two servers to communicate? What further info do I need to supply in this question? I'm looking for a basic step-by-step guide for how to do this.

  Read the article

• Fixing/Extending Standard Windows File Open/Save Dialog [closed]

  - by scunliffe

  Possible Duplicate: Change left side link of the Save As Dialog for a DropBox one? Almost every time I use the standard Windows (XP) File Open/Save Dialog I get frustrated in how long it takes me to navigate to where I want to go. :-( (I won't even get into the MS Office dialog that makes things even worse) This is the dialog I'm referring to (with some notes) Notes: Wouldn't a Drive list be handy in here? C:\, D:\, E:\, etc. What about a breadcrumb URI? (the magenta list of links) Why isn't Program Files one of the icons on the left? (green) I'm always going in there for something Why can't I type "../../../" to navigate up multiple directories in the File name box? (blue) There has got to be some utilities out there that can "hijack" or "overwrite" this core windows dialog to provide a much better set of options. I'm looking for any/all solutions to help fix this dialog.

  Read the article

• Batch file to ZIP only files in directory or sub directory

  - by PaulJavier

  I wanted to know if possible how to create a command line to do the following - if a directory exist ZIP only the contents into a ZIP file. If a directory has sub-directories ZIP only the contents into another ZIP file. Example: C:\Directory\sample.txt ZIP only sample.txt C:\Directory\Directory1\sample1.txt ZIP only sample1.txt C:\Directory\Directory1\Directory2\sample2.txt ZIP only sample2.txt So it would have created 3 zip files in C:\Directory and sub-directories. I will not know the name of the sub-directories so can I also assign some sort of variable that says if there are directories or sub-directories in C:\Directory then start above ZIP(s)? Thank you, Paul

  Read the article

• Can't access network share with name defined in hosts file

  - by Einar Egilsson

  I have a network share on a machine that I can only reach by IP address. I then defined an alias for the IP in my hosts file so I could use that instead of the IP but then I can't log on to the share, I just get the logon prompt again and again. So basically this: \\172.17.0.48\SomeShare works but this \\myalias\SomeShare doesn't. myalias is defined in c:\windows\system32\drivers\etc\hosts as 172.17.0.48 myalias And I can use the alias for remote desktop without problems. Can anyone tell me why this doesn't work for fileshares?

  Read the article

• Stupid question: prevent file from being changed under linux

  - by Josh

  Ok. Stupid question. I have forgotten what this is called and without remembering the name the search function on the site and on google is failing me. What's the command under linux to mark a file as "locked"/to prevent any changes from being made to it? I'm not talking about chmod. There's a property that can be set (again the name escapes me at the moment) which prevents even processes running as root from changing a file. What is this called and how do I set it?

  Read the article

• How to use File History with Recovery partition?

  - by Karl

  I formatted the recovery partition right after installing Windows 8. I'm curious as to why File history only allow the use of external HDD. Instead of using the Recovery Partition. I can't find a way to use it. I decided to use it exclusively for Restore Points. Is there any way to make the Recovery Partition exclusively for the use of File History? Or should I use 3rd Party programs instead, (Easeus Todo Backup, Macrium Reflect, etc)?

  Read the article

• Windows' "open with" with java and a jar file

  - by Boldewyn

  I use the rest-client to test REST APIs. It is basically just a .jar file, that is called via java -jar rest-client.jar. The rest-client uses two file extensions, in my case .rcq, to store data in files. I want to let the explorer open .rcq files with java -jar rest-client.jar <infile>, however, if I configure it (via GUI) to use the JAR alone, it obviously doesn't work. I'd be fine with touching HKEY_CLASSES_ROOT for this, as well, but don't know the exact syntax. By the way: It's WinXP.

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• Server 2008 Active directory file sharing Restriction

  - by Usman

  My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

  Read the article

• Starting services in batch file on windows 7

  - by Dima

  I have a fairly simple batch file which does just one thing - "net start myservice". This batch file gets shortcut-ed in a program group by installer so that users can simply click on the icon and get things started (or stopped). All works well in XP for the users with admin rights. But things get hairy on Win7 as the batch need to be run "as administrator" explicitly and often users don't know this. So my question is how to make this friendly? Telling users to right click and run as admin on Win7 and simply click on XP is kind of weird twist. I need a smart automatic simple thingy. I could probably use "runas/user:administrator" in the batch itself, but this "administrator" account might not be available on some machines. I'm looking for a universal solution for installing things like this on any Windows box. Ideas? How would you do this?

  Read the article

• List existing file server permission groups/users

  - by Patrick

  So we have taken over a new client and their existing file server is frankly a mess. We have migrated their old file server from a 2k box to a 2k8 DFS cluster and now I'm looking at rebuilding both the folder structure and their permissions. Unfortunately its been half done with AD groups (poorly named/no description/notes) and half with individuals named in security on the folders themselves. What I'm looking to do is to dump a complete list of all the folders with their security permissions (ideally I'd like to ignore files but not essential). CACLS got me half way there but fails with an odd error message and its output isn't particularly user friendly and I'm working with roughly 2Tb/250,000 files here so I really need something that gives me a bit more functionality. Question : does anyone have any experience of something similar/know of a bit of software that might help me out?

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• Importing Bookmarks from a Text File (to any browser/website)

  - by Gary Oldfaber

  I have dozens of text files containing around 60 url's each, accumulated over years of browsing on multiple computers. I wish to import these into any browser, to allow me to then use cross-browser importing. My ultimate goal is to then import the bookmarks to somewhere like delicious, which will automatically tag the links, allowing me to sort each page by subject. The closest I've managed to find is: Import bookmarks to firefox from txt file However while this plugin imports from a text file, it has no correlation with Firefox's bookmarks, and only allows you to export back to csv/txt files. I understand that the problem of importing from text files is that bookmarks need a Title, and so I wish to use a given pages existing title. I've been unable to find any such tool on the net.

  Read the article

• Mount remote drive by port forwarding

  - by Anushka

  I have a windows 7 computer at home and a remote windows XP machine with an external USB drive attached to it. I would like to be able to copy files to and from home/the remote USB drive. The problem is that the only way of contacting the work computer is by first sshing into a different remote linux machine as there is a firewall that prevents direct internet connection. I can see two possible solutions but I don't know how to do them. Set up winscp using ssh port forwarding via the linux box so that I can copy to and from the two windows machines. I assume that I would need to run an ssh server on the XP machine as well to do this? Mounting the remote USB drive on the remote windows machine from the home XP machine via ssh port forwarding again via the linux box. Does anyone know how to do either solution?

  Read the article

• Windows batch file reference to own directory

  - by rwallace

  Suppose you have C:\foo\foo.bat which needs to refer to C:\foo\foo.txt. It may be run from a different directory, but needs to get foo.txt from its own directory, not the current directory. Obviously this could be done by putting the full path C:\foo\foo.txt in foo.bat. The twist is, it's not known at the time of writing the batch file, where it will end up residing on the user's machine, so what the batch file actually needs to do is get foo.txt from the directory where I live, wherever that happens to be. (In a C program I'd use argv[0] but that doesn't seem to work with batch files.) Is there a way to do this?

  Read the article

• How can I read a comma delimited text file in a Windows batch file?

  - by Sms

  I can get it to read the text file until it becomes a comma delimited text file. I would like to read the two variables on each line and test each one with a If statement for another condition. Problem is I can't read the variables properly. Tried many things but here is what I will post. Timeouts are to see what's happening: for /f "tokens=*" %%a in (TestText.txt) do ( timeout /t 1 echo %%a is the present variabe timeout /t 2 if %%a=="One","1" echo Match for "One","1" timeout /t 3 if %%a=="One""1" echo Match for "One","1" timeout /t 4 if %%a=="One" echo Match for "One" timeout /t 5 if %%a=="1" echo Match for "1" timeout /t 6 ) TestText.txt "One","1" "Two","2" "Three","3" "Four","4" OUTPUT: "One","1" is the present variabe

  Read the article

• file sharing over external and internal networks

  - by pradvk

  Dear friends, Please tell me whether it is possible for someone on the external network to see the network folder shares of an internal LAN network in DHCP (192.168.x.x) through a Comp-A on an external network in DHCP (123.123.x.x) both networks are on different subnets but Comp-A has access to both networks and can see all the shared drives of both the internal and external networks using firewall is not an option because file sharing is required everywhere. care is taken from viruses/trojans... remote desktop etc is disabled on Comp-A Please let me know. Thanks and Regards pk

  Read the article

• Prioritize file sharing capabilities in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• Settings what-opens-what once and for all (Backing up File Associations)

  - by ldigas

  Every time I switch machines (as in, get a new one, or reinstall an OS or something like that) my precious file associations get lost. And the next six months pass slowly until I again set them up right. Is there a program that allows me to: Set all the extensions I would like to open with let's say, Vim, without setting each one of them individually. Something of a kind: Vim opens: .... list of extensions ... and/or A program which lets me backup my current settings, and when I copy those to a new machine it lets me just modify the paths where I putted the applications in question, and it does the rest (again, associates that program with all the extensions it opened before).

  Read the article

• machine ignoring host file?

  - by squinny

  so i can ping the ip adress for the server i need but when i ping it by name, the server name is followed by an incorrect ip address. My host file is updated, i can communicate with my machine from my server just fine. i can access websites on the server by typing the ip adress into the adress bar followed by the name. it is like my machine is ignoring my hosts file... i have updated re updated...flushed dns, u name it ive done it any ideas?

  Read the article

• Copying Columns from Grid to Clipboard in SQL Developer

  - by thatjeffsmith

  There are several ways to get data from a query or a table|view to the clipboard. You know the tried and true, copy and paste. But what if you only want one or more columns, not every column? There are several ways to do this, let’s see if we can’t identify all of them. Write your query to only include the data you want Obvious? Yes. Needed to be said? Definitely. The best tuning tip is to only ask for the data you need, only when you absolutely need it. But let’s look at a few more practical ways to do this. Hide the unwanted columns Mouse right click on an column header. In the context menu, select ‘Columns.’ Hide the columns you don’t want. Copy and paste. WYSIWYG Grids, Hide Columns and Filter Rows Mouse select the columns Obvious, but a bit painful. For a very large dataset, you’ll be holding down the Shift and PageDown buttons – but it works. Remember to use Ctrl+Shift+C to get the column headers with the data. Use the Export Wizard This used to be called ‘Unload’ – agreed, not a great name. So, we changed it. In a grid, right mouse click on the data, and on the context menu, select ‘Export…’ Select your format – I suggest ‘delimited’ or ‘fixed’ for copying data to the clipboard. You can export to the clipboard, yes you can! Click ‘Next.’ Click in the Columns dialog, and choose the columns you want copied. Trim the columns you don't want copied Click ‘Finish.’ Alt or Ctrl tab to your window or application of choice. And Paste! "FIRST_NAME" "LAST_NAME" "Donald" "OConnell" "Douglas" "Grant" "Jennifer" "Whalen" "Pat" "Fay" "Susan" "Mavris" "William" "Gietz" "Alexander" "Hunold" "Bruce" "Ernst" "David" "Austin" "Valli" "Pataballa" "Diana" "Lorentz" "Daniel" "Faviet" "John" "Chen" "Ismael" "Sciarra" "Jose Manuel" "Urman" "Luis" "Popp" "Alexander" "Khoo" "Shelli" "Baida" "Sigal" "Tobias" "Guy" "Himuro" "Karen" "Colmenares" "Matthew" "Weiss" "Adam" "Fripp" "Payam" "Kaufling" "Shanta" "Vollman" "Kevin" "Mourgos" "Julia" "Nayer" "Irene" "Mikkilineni" ... There’s probably at least 2 or 3 more ways, but… But, try these and let me know how we can improve things. I’ve already gotten a request to be able to include the SQL text used to populate the dataset on the the copy to clipboard, and it’s now on our to-do list

  Read the article

• Flexible cloud file storage for a web.py app?

  - by benwad

  I'm creating a web app using web.py (although I may later rewrite it for Tornado) which involves a lot of file manipulation. One example, the app will have a git-style 'commit' operation, in which some files are sent to the server and placed in a new folder along with the unchanged files from the last version. This will involve copying the old folder to the new folder, replacing/adding/deleting the files in the commit to the new folder, then deleting all unchanged files in the old folder (as they are now in the new folder). I've decided on Heroku for the app hosting environment, and I am currently looking at cloud storage options that are built with these kinds of operations in mind. I was thinking of Amazon S3, however I'm not sure if that lets you carry out these kinds of file operations in-place. I was thinking I may have to load these files into the server's RAM and then re-insert them into the bucket, costing me a fortune. I was also thinking of Progstr Filer (http://filer.progstr.com/index.html) but that seems to only integrate with Rails apps. Can anyone help with this? Basically I want file operations to be as cheap as possible.

  Read the article

• EHome IR receiver and Ubuntu 13 - any one have this working?

  - by squakie

  I have a "generic" USB IR receiver I purchased off of Ebay to make my life a little easier with XBMC on my Ubuntu box. I am currently running 13.10 and have never tried nor have any knowledge of IR in Ubuntu. I know of lirc, and I know a lot of it is now included in the kernel. My understanding is that lirc in basic terms maps pulses from an remote control to functions - like keyboard or mouse clicks. It is also my understanding that I might still need a driver or something for my device. lsusb shows the device as: Bus 006 Device 003: ID 147a:e016 Formosa Industrial Computing, Inc. eHome Infrared Receiver dmesg shows the following pertaining to the device: [43635.311985] usb 6-2: USB disconnect, device number 2 [43641.344387] usb 6-2: new full-speed USB device number 3 using ohci-pci [43641.543454] usb 6-2: New USB device found, idVendor=147a, idProduct=e016 [43641.543467] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [43641.543473] usb 6-2: Product: eHome Infrared Transceiver [43641.543478] usb 6-2: Manufacturer: Formosa21 [43641.543483] usb 6-2: SerialNumber: FM000623 [43641.555736] Registered IR keymap rc-rc6-mce [43641.555968] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2/input15 [43641.556221] rc2: Media Center Ed. eHome Infrared Remote Transceiver (147a:e016) as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/rc/rc2 [43641.556584] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input16 [43641.557186] rc rc2: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 [43641.731965] mceusb 6-2:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 1 [43641.731978] mceusb 6-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active) (excuse the double spacing, but I had to put in extra cr/lf using "enter" or the entire thing was just one long unreadable string). When I connect the same IR receiver to a Raspberry Pi running OpenELEC/XBMC there is no flashing led unless I press a remote button, and the device works. In Ubuntu, the led is constantly blinking, and nothing happens when I press a remote key. I tried the command line program to test but it never echoes anything back to the terminal window. I believe it must need some sort of driver or something else, but I am completely in the dark on this. If it matters I also have: - Logitech wireless keyboard/mouse USB receiver - Tenda USB wireless adapter And.....I've also noticed some errors now that show in dmesg that seem to somehow related to HDMI if that makes any sense: 46721.144731] HDMI: ELD buf size is 0, force 128 [46721.144749] HDMI: invalid ELD data byte 0 [46721.444025] HDMI: ELD buf size is 0, force 128 [46721.444061] HDMI: invalid ELD data byte 0 [46721.743375] HDMI: ELD buf size is 0, force 128 [46721.743411] HDMI: invalid ELD data byte 0 [46722.043092] HDMI: ELD buf size is 0, force 128 [46722.043118] HDMI: invalid ELD data byte 0 [46722.343086] HDMI: ELD buf size is 0, force 128 [46722.343122] HDMI: invalid ELD data byte 0 [46722.642517] HDMI: ELD buf size is 0, force 128 [46722.642574] HDMI: invalid ELD data byte 0 [46722.942459] HDMI: ELD buf size is 0, force 128 [46722.942485] HDMI: invalid ELD data byte 0 [46723.242103] HDMI: ELD buf size is 0, force 128 [46723.242129] HDMI: invalid ELD data byte 0 [46723.541877] HDMI: ELD buf size is 0, force 128 [46723.541923] HDMI: invalid ELD data byte 0 [58366.651954] HDMI: ELD buf size is 0, force 128 [58366.651980] HDMI: invalid ELD data byte 0 [58366.951523] HDMI: ELD buf size is 0, force 128 [58366.951549] HDMI: invalid ELD data byte 0 [58367.251075] HDMI: ELD buf size is 0, force 128 [58367.251121] HDMI: invalid ELD data byte 0 [58367.550517] HDMI: ELD buf size is 0, force 128 [58367.550563] HDMI: invalid ELD data byte 0 [58367.850219] HDMI: ELD buf size is 0, force 128 [58367.850256] HDMI: invalid ELD data byte 0 [58368.150160] HDMI: ELD buf size is 0, force 128 [58368.150185] HDMI: invalid ELD data byte 0 [58368.449544] HDMI: ELD buf size is 0, force 128 [58368.449570] HDMI: invalid ELD data byte 0 [58368.749583] HDMI: ELD buf size is 0, force 128 [58368.749629] HDMI: invalid ELD data byte 0 [58369.049280] HDMI: ELD buf size is 0, force 128 [58369.049326] HDMI: invalid ELD data byte 0 [58394.706273] HDMI: ELD buf size is 0, force 128 [58394.706300] HDMI: invalid ELD data byte 0 [58394.706350] HDMI: ELD buf size is 0, force 128 [58394.706367] HDMI: invalid ELD data byte 0 [58395.003032] HDMI: ELD buf size is 0, force 128 [58395.003058] HDMI: invalid ELD data byte 0 [58395.302680] HDMI: ELD buf size is 0, force 128 [58395.302705] HDMI: invalid ELD data byte 0 [58395.602442] HDMI: ELD buf size is 0, force 128 [58395.602477] HDMI: invalid ELD data byte 0 [58395.902143] HDMI: ELD buf size is 0, force 128 [58395.902179] HDMI: invalid ELD data byte 0 [58396.201839] HDMI: ELD buf size is 0, force 128 [58396.201875] HDMI: invalid ELD data byte 0 [58396.501538] HDMI: ELD buf size is 0, force 128 [58396.501574] HDMI: invalid ELD data byte 0 [58396.801232] HDMI: ELD buf size is 0, force 128 [58396.801268] HDMI: invalid ELD data byte 0 [58397.100583] HDMI: ELD buf size is 0, force 128 [58397.100627] HDMI: invalid ELD data byte 0 [63095.766042] systemd-hostnamed[8875]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! dave@davepc:~$ EDIT: Maybe another way to look at this would be what does Ubuntu do or not do that OpenELEC does or doesn't do (on Raspberry Pi) such that it works in OpenELEC but not in Ubuntu?

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >