Search Results

Search found 25792 results on 1032 pages for 'map edit'.

Page 812/1032 | < Previous Page | 808 809 810 811 812 813 814 815 816 817 818 819  | Next Page >

  • What is the bash syntax to create a new directory in the directory above?

    - by mozerella
    I aim to make a script for mogrify. The mogrify command will resize images in a directory and put the resized images into a directory on the same directory level, with the same name as the work directory, but with a suffix (_a). The new directory will be moved to another collection later on. Something like this, #!/bin/bash mkdir ../n_a for file in *{.JPG|.jpg}; do mogrify -path ../n_a -resize 1200x1200 -quality 96;done I'm guessing ../ denotes the parent dir when working in a child directory, but I need help here. Edit: "n" needs to be replaced with the syntax for the working directory name. Sorry there was a typo as well third script line, should have read n not x Edit2: This script does exactly what I need and it's silent. #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p $DEST mogrify -path $DEST -resize 1200x1200 -quality 96 *.jpg *.JPG thanks to vgoff for the correct PWD syntax and cesareriva http://www.cesareriva.com/archives/722 for showing me the DEST function. Something else: ${PWD##*/}_a is not caring for spaces in the directory name and the script fails. An empty dir is created in the same dir as the images. Found it out now, it needs quotations on the $DEST too, presumably to help mkdir create the dir with a space in the name, and mogrify to write the files to the right place, like this #!/bin/bash DEST="../${PWD##*/}_a" mkdir -p "$DEST" mogrify -path "$DEST" -resize 1200x1200 -quality 96 *.jpg *.JPG

    Read the article

  • Pull network or power? (for contianing a rooted server)

    - by Aleksandr Levchuk
    When a server gets rooted (e.g. a situation like this), one of the first things that you may decide to do is containment. Some security specialists advise not to enter remediation immediately and to keep the server online until forensics are completed. Those advises are usually for APT. It's different if you have occasional Script kiddie breaches. However, you may decide to remediate (fix things) early and one of the steps in remediation is containment of the server. Quoting from Robert Moir's Answer - "disconnect the victim from its muggers". A server can be contained by pulling the network cable or the power cable. Which method is better? Taking into consideration the need for: Protecting victims from further damage Executing successful forensics (Possibly) Protecting valuable data on the server Edit: 5 assumptions Assuming: You detected early: 24 hours. You want to recover early: 3 days of 1 systems admin on the job (forensics and recovery). The server is not a Virtual Machine or a Container able to take a snapshot capturing the contents of the servers memory. You decide not to attempt prosecuting. You suspect that the attacker may be using some form of software (possibly sophisticated) and this software is still running on the server.

    Read the article

  • redirecting output from telnet / nc to file in script fails when cron'd

    - by qhartman
    So, I have device on my network which sits there listening on a port for a connection, and when a connection is made it dumps ascii data out. I need to capture that data to a file. I wrote a dead simple shell script that does this: #!/bin/bash #Config Variables. Age is in Days. DATA_ROOT=/root/data FILENAME=data_`date +%F`.dat HOST=device COMPRESS_AGE=3 #Sanity Checks if [ ! -e $DATA_ROOT ] then echo "The directory $DATA_ROOT seems to not exist. Please create it." exit 1 fi if [ -e $DATA_ROOT/$FILENAME ] then echo "You seem to have extracted data already today. Aborting" exit 1 fi #Get Data nc $HOST 2202 > $DATA_ROOT/$FILENAME #Compress old Data find $DATA_ROOT -type f -mtime +$COMPRESS_AGE -exec gzip {} \; exit 0 It works great when I run it by hand, but when I run it from cron, it doesn't capture any of the output. If I replace nc with telnet I see the initial telnet headers about escape sequences and whatnot, but not the data. Ideas? I've tried forcing bash to act like an interactive shell with -i. I've tried redirecting both stderr and stdout. I know it's got to be some silly simple thing, but I'm utterly failing. This is driving me nuts... EDIT I also just noticed that the nc processes from all my previous attempts at this have been siting sleeping, and when I killed them, cron sent me a bunch of non-sensical error messages. At least now I have something to dig into!

    Read the article

  • No outbound internet connection after restarting CentOS 6.3

    - by wnstnsmth
    After restarting a headless CentOS 6.3 machine, it lost outbound internet connectivity, i.e. I can still connect to the server via SSH (ssh root@**.126.18.56), but stuff such as ping google.com gives google.com: unknown host, and yum list some_package gives a lot of network errors. This is what ifconfig gives: eth0 Link encap:Ethernet HWaddr 00:25:90:78:2D:5D inet addr:**.126.18.56 Bcast:**.126.18.255 Mask:255.255.255.0 inet6 addr: fe80::225:90ff:fe78:2d5d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:75594 errors:0 dropped:0 overruns:0 frame:0 TX packets:787 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7074741 (6.7 MiB) TX bytes:144391 (141.0 KiB) Interrupt:20 Memory:f7a00000-f7a20000 eth1 Link encap:Ethernet HWaddr 00:25:90:78:2D:5C UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Memory:f7900000-f7920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:504 (504.0 b) TX bytes:504 (504.0 b) I have absolutely no clue how to debug this, and I find it very strange since I can still connect via ssh. EDIT: Weirdly, /etc/resolv.conf does not contain any entries, or none that I can make sense of: # Generated by NetworkManager search sui-inter.net # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com So is it possible that rebooting the server erased that file? It worked before at least! And how do I solve this? By the way, pinging an IP address works.

    Read the article

  • lighttpd on Fedora permission issues

    - by Isaac Gateno
    I'm trying to get started with lighttpd on Fedora 16 to run a RESTful api for development. Right now even with the most basic sample config file I'm getting 404 pages when I know the pages I'm pointing at exist. From reading other questions I'm leaning towards this being a permissions issue, but I'm confused about how lighttpd runs on Fedora. There's a user called "lighttpd" not "www-data"? I can't see this user in the system-config-users tool and I can't su into it to check which permissions it has. I'm trying to point lighttpd to "/var/www/lighttpd" which has some example pages in it. The permissions for the files inside are set to -rw-r--r-- and the permissions for the folder containing them are drwxr-xr-x. Doesn't that mean that any user can view these files? I'm not sure what else I should be checking as I don't have much experience with server configuration. Any help would be appreciated. Edit: I was following the tutorial configuration here so the lighttpd.conf file contains server.document-root = "/var/www/lighttpd/" server.port = 3000 mimetype.assign = ( ".html" => "text/html", ".txt" => "text/plain", ".jpg" => "image/jpeg", ".png" => "image/png" ) and I was just trying to get the basic example page working.

    Read the article

  • How do i play nicely with MS SQL/SQL Server 2008

    - by acidzombie24
    Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

    Read the article

  • Wordpress on Apache is redirecting all https to http

    - by Krist van Besien
    I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

    Read the article

  • I just got a virus 6 mins ago, how? Situation.

    - by acidzombie24
    -Edit- for the people who say it isn't a virus. Norton does detect it as a virus, an icon was placed on my system tray and rkpg.exe is in my C: which was placed 6 min ago around the time my computer rebooted on its own causing me to lose data :@. Situation I on Windows XP, behind a Linksys router, I don't have DMZ on so nothing should be connecting to me. I had Firefox, MSN and Visual Studio opened. With C# I programmed a quick application to scan some pages with Internet Explorer. The site it was scanning was deviantART (which is pretty trustworthy), I doubt any banners there would hold a virus. I went to a suspicious site called freetxt.com but that was on Firefox and it didn't load the site. With an extra check I ping it and got this message "Ping request could not find host freetxt.com." The virus seems to be called braviax. Right now it brought up a message saying my computer may be infected? How on earth did it get in? I don't have uTorrent installed or any torrent or p2p applications. Nothing is installed on my computer that I haven't installed before and I know the exact time it installed because I see rkpg.exe on my C drive and my computer restarted on its own around the same time. For the previous 30 minutes actually the previous hour all I did was talk on MSN, not click any links (I went to freetxt on my own) and had that Internet Explorer thing running (which I programmed). How did it get in? I really doubt it came from a banner on deviantART and installed when I loaded the page with the webbrowser-control so something else may have happened? Is there any system defaults I should turn off? I have remote assistance off but even if it was on I shouldn't be infected due to the router not forwarding any ports?

    Read the article

  • Windows Home Server 2011, No disks "suitable for a backup destination"

    - by Scott Beeson
    I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

    Read the article

  • Adding a prefix or postfix to a Word 2013 quotation source

    - by user2690527
    I am using the German version of Word 2013, so I am not absolutely sure, if "quotation source" is the term being used in the English version. I am talking about the automatic text field, one can get via "References" (German: "Verweise"), "Insert quotation" (German: "Zitat einfügen"). Then one gets a drop down menu with all the entries from the biobliography, one can pick one and then an automatic text field is inserted into the text. After it is hopefully clear what I am talking about, here is the question: I choosed the citation style "ISO 690" that generates labels of the pattern "(author+year)" in round parentheses. Sometimes I have to append a prefix or postfix to the label, but this prefix/postfix must go into the parantheses. Is there any way how I can do this? For example, I can add page numbers to the end of a quotation label via a special dialog box that appears after a right click onto the text field and choosing "Edit quote" (German: "Zitat bearbeiten"). But there are a lot more cases of optional pre-/postfixes than page numbers. I am looking for a way to add general pre-/postfixes.

    Read the article

  • How do you permanently disable the 'This Connection is Untrusted' page on Firefox

    - by TheIronChef9
    I'm going insane. Can someone please help me to COMPLETELY DISABLE the 'This Connection is Untrusted' page on Firefox. Facts: I am running Firefox 23.0 on an Ubuntu machine (downloaded and installed ubuntu today) It is a work computer and I have to use my employer's proxy While visiting Webpages/webapps like Gmail or Google brings up the 'This Connection is Untrusted' page and I have to go through the whole tedious task of selecting 'I understand the Risks' and add Exceptions, etc. etc. The fact is, I don't care about the risks. I would rather this computer melt into the ground than have to see that page ever again. I want to dance naked in untrusted pages and not give a damn about the consequences. I just never want to see that page again. Ever. For some sites (eg. wikipedia), the css doesn't load and I end up seeing them in plain text. As a result these sites are completely useless. Wasted hours trying to solve this for stackoverflow.com. These issues happen on the Firefox on my Windows XP machine as well (also using the same proxy). I don't want to export/import certificates or create exceptions for every site that shows this bloody page. I just want this page gone. I don't want Firefox to tell me what's safe and what's not. Also, my system time and date are correct. I've also tried the lies on this page too with no good results. Edit: I've also tried the whole going into the Advance-Certificates-validation setup page and unchecked 'Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates' checkbox. Nothing happened even after restarting firefox or rebooting. I need help. Thanks.

    Read the article

  • Windows 7 Laptop Randomly Sleeping

    - by Josh Arenberg
    I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

    Read the article

  • Can I charge USB devices from a powered hub that isn't connected to a PC?

    - by Anodyne
    This will probably sound familiar to most of you... In my home, we have a whole bunch of devices that can be charged via USB (two iPhones, a BlackBerry, an iPod Touch, etc ad nauseam). We also have a bunch of USB chargers, each of which has a single USB port on it. I'd like to have something permanently connected to AC power with at least 4 USB ports on it, so we can just plug devices in and don't need to go looking for a free outlet. So here's the question: if I buy a powered USB hub, will that do the job even if I don't connect it to a PC? Ideally if you have a hub that you can personally verify will be suitable, let me know the manufacturer and model :-) Thanks in advance! EDIT: The solution I eventually went for was this: Kensington 4-Port USB Charger for Mobile Devices (Europe) There's also a US version here: Kensington 4-Port USB Charger for Mobile Devices (USA) It arrived yesterday, so I used it to charge the following devices, all at the same time, overnight last night: 32GB iPhone 3GS 16GB iPhone 3G First-generation iPod Touch Kensington Portable Power Pack for Mobile Devices I can't say anything about the charging speed (as I left it overnight) but all devices were fully charged this morning.

    Read the article

  • Recovery disk Windows 8 HP Pavilion g6

    - by fpghost
    I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

    Read the article

  • Allowing Sharepoint to relay email through Exchange

    - by dunxd
    I have written a Sharepoint 2007 web part that sends a field from a form to a specified email address. I have got the form working as I require, but at present it can only send to internal email addresses. Sharepoint's email functions use SMTP to send to our Exchange 2003 server, but because our Exchange server is configured to prevent relaying, if the To: address is not at a local domain, it won't deliver the mail. I don't want to open up our Exchange server to be a completely open relay. What I want is to allow my Sharepoint servers to send mail to addresses outside our domain. The following seem possible: Allow all mail sent from one of the Sharepoint servers to be relayed Allow all mail from a web application pool account to be relayed (I am not sure that the application pool authenticates to the SMTP server though) A combination of the two Can anyone advise on the best way of doing this? Is setting up a dedicated SMTP server on the Exchange server (not a separate physical server) the right way of going about this? EDIT: Note this is for Exchange 2003. There is a post on setting this up in Exchange 2007 which appears to have recognised the frequent requirement to do what I need. It doesn't give much detail on 2003 though. Can anyone expand?

    Read the article

  • IDE compatability with SATA image

    - by Ormis
    We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

    Read the article

  • Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

    - by Rob
    Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

    Read the article

  • Strategy for Incremental Datasource fetchings in Excel

    - by user1352530
    I am in an scenario with a table that is refresh by a third app every week. I need to keep accumulating all data in Excel, using an ODBC connection to the database. I am wondering Approach 1: Is there a way to force Excel to append results for every update (this update would be triggered according to a parameter that indicates week)? I tried to define the table for which the connection loads using a dynamic reference but once is anchored first time, table position is never redefined Approach 2: Use an ETL to accumulate all weekly results into a staging table and then connect Excel to it in real time. But, I would need a mechanism for caching old data, as I cannot grow exponentially the time Excel opens. Imagine after 10 years, Excel would need to update at opening 10 years fo data before showing it. Is there a way to store already fetched data and increment it at real time (when book is opened) by selecting new data (with a query/filter of something) Thanks EDIT: Maybe it's better to ask it that way: What is the optimal strategy for a table that keeps growing and needs to be read in real time by Excel? I just don't want to fetch absolutely all data after some months...

    Read the article

  • PassEnv does not find ENV variables

    - by quodlibetor
    I've got this /etc/profile.d/myfile.sh: export MYVAR=myval I also have a PassEnv MYVAR line in a <virtualhost> section of an apache conf dir. That lets me do things like: $ echo $MYVAR myval $ python >>> import os; os.getenv('MYVAR') 'myval' $ sudo echo $MYVAR myval $ sudo -i root# echo $MYVAR myval But then, despite that being the case I get: root# /sbin/service httpd restart /sbin/service httpd restart Stopping httpd: [ OK ] Starting httpd: [Mon Oct 22 14:44:02 2012] [warn] PassEnv variable MYVAR was undefined [ OK ] And all of my attempts to access MYVAR from within my wsgi scripts just don't work. Thoughts? Am I doing something obviously wrong? EDIT for more detail I've got a swarm of computers/VMs and a swarm of developers working on a swarm of projects. I need a simple central place to keep environment information, the most common is the "environment" (dev/stage/prod). The scheme that we've got (modifying *.wsgi programmatically) is turning out to be more fragile than we'd like. The main options that I see are: put things in the shell environment put things in other config files Getting things into the shell environment is the best, because we won't need to write yet more duplicated "what is my environment" code.

    Read the article

  • Recovering a broken NTFS filesystem?

    - by OverTheRainbow
    A much-needed Windows Update broke a Vista laptop that was running fine until then: After booting up, Windows displays "Please wait..." but it never goes anywhere. I waited for a couple of hours, there is a bit of disk activity, but it didn't work out in the end. I booted with the Vista DVD, chose "Repair your computer" which said that there was nothing wrong :-/ Next, I booted it up with a Linux USB keydrive, and ran Gparted 0.8.1 (which includes ntfsresize v2011.4.12AR.4 libntfs-3g) which displays a bunch of warnings for the NTFS partition where the Vista system is located such as: ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 16 has no FILE magic (0x0) Next, I ran ntfsfix /dev/sda2, which said: Mounting volume... OK Processing of $MFT and $MFTMirr completed successfully. NTFS volume version is 3.1. NTFS partition /dev/sda2 was processed successfully. Next, I rebooted Vista, which did a CHKDSK, before rebooting. But I'm still getting nowhere with "Please wait..." Before I copy the user's data to another host and reinstall Vista from a DVD, does someone know what I could try? Thank you. Edit: In case someone else has the same issue... After the BIOS, hit F8 and choose "Repair your computer", followed by "Toshiba HDD Recovery". In addition to a 1,5GB partition labelled "WinRE", the hard disk contains a second partition labeled "Data" from which the application will fetch a system image and reinstall it in the "Vista" partition. Make sure you copy your data out of the system partition before doing this.

    Read the article

  • Working with different PHP version at the same time, php_value extension_dir not working?

    - by Gremo
    I need both PHP 5.4.7 and 5.3.17 running on Windows 7 x64 with Apache 2.2.23. This is my virtual host configuration: <VirtualHost *:80> DocumentRoot "C:/WAMP/Apache/htdocs/php54" ServerName php54.local PHPIniDir "C:/WAMP/PHP54" LoadModule php5_module "C:/WAMP/PHP54/php5apache2_2.dll" php_value extension_dir "C:/WAMP/PHP54/ext" <Directory "C:/WAMP/Apache/htdocs/php54"> Order allow,deny Allow from all </Directory> </VirtualHost> The PHPIniDir and LoadModule directives work fine and using phpinfo() inside my script prints the right PHP version. But I need to load extensions, and this is where it fails. php_value extension_dir should be C:/WAMP/PHP54/ext but it's (default one) C:/php. What I'm missing here? EDIT: Of course I can set this value directly in C:/WAMP/PHP54/php.ini, but I prefer passing it using vhost configuration: ; Directory in which the loadable extensions (modules) reside. ; http://php.net/extension-dir ; extension_dir = "./" ; On windows: extension_dir = "C:/WAMP/PHP54/ext"

    Read the article

  • SSH attcack CentOS Amazon EC2

    - by user37143
    Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

    Read the article

  • How can I rapidly switch hosts?

    - by EAMann
    I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

    Read the article

  • Windows 8 not shutting down properly

    - by Patrick
    Since installing Windows 8, the computer hasn't been shutting down properly. When selecting to power down, the PC quickly displays the shutting down screen, the monitor powers off, and the computer remains on but unresponsive. After about 5 minutes, the computer will turn off. Upon booting into windows again, I am informed that Windows didn't properly shut down. I'm running a fast SSD, and it's a clean install of Windows 8, so there's no way Windows is taking that time to do some sort of hibernate on shutdown or whatever - not to mention the error when entering Windows the next time. This happens on every shut down. Restart works as expected. EDIT: Formatting again didn't work. Fails regardless of drivers installed. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

    Read the article

  • How to know who accessed a file or if a file has 'access' monitor in linux

    - by J L
    I'm a noob and have some questions about viewing who accessed a file. I found there are ways to see if a file was accessed (not modified/changed) through audit subsystem and inotify. However, from what I have read online, according to here: http://www.cyberciti.biz/tips/linux-audit-files-to-see-who-made-changes-to-a-file.html it says to 'watch/monitor' file, I have to set a watch by using command like: # auditctl -w /etc/passwd -p war -k password-file So if I create a new file or directory, do I have to use audit/inotify command to 'set' watch first to 'watch' who accessed the new file? Also is there a way to know if a directory is being 'watched' through audit subsystem or inotify? How/where can I check the log of a file? edit: from further googling, I found this page saying: http://www.kernel.org/doc/man-pages/online/pages/man7/inotify.7.html The inotify API provides no information about the user or process that triggered the inotify event. So I guess this means that I cant figure out which user accessed a file? Only audit subsystem can be used to figure out who accessed a file?

    Read the article

< Previous Page | 808 809 810 811 812 813 814 815 816 817 818 819  | Next Page >