Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 814/971 | < Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >

• Does IIS Sometimes Allocate More Worker Processes Than Configured?

  - by Paul Williams

  We have an IIS 7.5 web service on Windows Server 2008 that handles WCF requests from C# clients. This service is configured to have Maximum Worker Processes = 1, so it is not a web garden. IIS is setup to recycle itself at the same time every day (3 AM). I am trying to debug gnarly connection issues, so I wanted to be sure the application pool was not recycling itself. I configured the pool to log an event when it recycles itself. To my surprise, I see the following entries in the System event log: Level: Information Date/Time: 3/23/2012 3:00:00 AM - Source: WAS - Event ID: 5076 A worker process with process id of '6636' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. Level: Information Date/Time: 3/23/2012 2:59:39 AM - Source: WAS - Event ID: 5076 A worker process with process id of '9364' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. IIS is correctly recycling the application pool at 3 AM. However, I do not understand why I would be getting two recycle events in the log within a few seconds of each other. The maximum number of processes is 1. Does IIS sometimes allocate multiple processes for an application pool that is specified as having 1 process? -- edit -- I connected at about 4 PM today and only saw 1 w3wp.exe process. There are no other event log entries that would indicate a crash.

  Read the article

• How to diagnose and solve an erratic "HDCP Support Required"?

  - by Jom Orgstrom

  I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

  Read the article

• apache2 server running ruby on rails application has go daddy cert that works in chrome/firefox and ie 9 but not ie 8

  - by ryan

  I have a rails application up on a linode ubuntu 11 server, running apache2. I have a cert purchased from godaddy, (where we also bought our domain) and the cert is installed on my server. Part of my virtual host file: ServerName my_site.com ServerAlias www.my_site.com SSLEngine On SSLCertificateFile /path/my_site.com.crt SSLCertificateKeyFile /path/my_site.com.key SSLCertificateChainFile /path/gd_bundle.crt The cert works fine in Chrome, FireFox and IE 9+ but in IE 8- I get this error: There is a problem with this website's security certificate. The security certificate presented by this website was issued for a different website's address. I'm hosting multiple rails apps on this same server (4 right now plus some old php sites that don't need ssl). I have tried googling every possible combination of the error/situation that I could think of but at this point I'm shooting in the dark. The closest I could come up with is that some versions if IE don't support SNI. But that doesn't apply here because I am getting the warning on windows 7 machines running IE 8, and the SNI only seemed to apply to IE 8 if the operating system was windows XP. So why is this cert being accepted by all browsers but giving me a warning in IE 8? Edit: So doing a little more digging and I figured out some more. It turns out this is effecting IE 9 as well. However the problem seems to be that IE is not traversing the ssl chain to get to the right cert. FireFox and Chrome when I go to view certificate show the correct one, but IE is showing one of our other sites certificates. REAL QUESTION HERE: That being the case why is IE not getting the right certificate when others are and how do I fix it?

  Read the article

• Debian, 2 NICs load-balancing or agregating with one same gateway

  - by pouney

  Hi, I have one server, with double NICs connected to one switch with the same gateway. Behind the switch we have internet. |Debian| - eth0 - switch - internet - eth1 - same I don't understand how to load-balancing between eth0 and eth1. The inbound/outbound traffic always use eth1. This is the config: # The primary network interface allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.248.82 netmask 255.255.255.240 network 192.168.248.80 broadcast 192.168.248.95 gateway 192.168.248.81 allow-hotplug eth1 auto eth1 iface eth1 inet static address 192.168.248.83 netmask 255.255.255.240 network 192.168.248.80 broadcast 192.168.248.95 gateway 192.168.248.81 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.248.80 0.0.0.0 255.255.255.240 U 0 0 0 eth1 192.168.248.80 0.0.0.0 255.255.255.240 U 0 0 0 eth0 0.0.0.0 192.168.248.81 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.248.81 0.0.0.0 UG 0 0 0 eth0 Ips aren't real, it's just for the example. Anybody have an idea on correct routing to use eth0 on 192.168.248.82 and eth1 on 192.168.248.83 ? I have many example for multiple gateway but here it's the same. Thanks all. Regards

  Read the article

• Is there any way to force my Linux box to always boot up with a self-assigned IP address?

  - by Jeremy Friesner

  This is perhaps an unusual request: I'm trying to get a Debian Linux box to always give itself a self-assigned IP address (i.e. 169.254.x.y) on boot. In particular, I want it to do that even when there is a DHCP server present on the LAN. That is, it should not request an IP address from the DHCP server. From what I can see in the "man interfaces" text, there is an option for "manual", and an option for "dhcp". Manual assignment won't do, since I need multiple boxes to work on the same LAN without requiring any manual configuration... and "dhcp" does what I want, but only if there is no DHCP server on the LAN. (A requirement is that the functionality of these boxes should not be affected by the presence or absence of a DHCP server). Is there a trick that I can use to get this behavior? EDIT: By "no manual configuration", I mean that I should be able to take this box (headless) to any LAN anywhere, plug in the Ethernet cable, and have it do its thing. I shouldn't have to ssh to the box and edit files to get it working each time it is moved to a different LAN.

  Read the article

• Optimal video resolution and encoding for recording games for YouTube?

  - by Rookie

  I want to record video from games, therefore I cannot use very large video resolution, but I still want to make the large video view to look as sharp as the original encoded video before upload. I tried to use YouTube's recommended 854x640 resolution, but it wasn't possible with h264 and the encoding software I used (Handbrake) converted it to a width of the nearest multiple of 4, which I think is a limitation of the h264 format. The video I encoded was sharp and fine quality, but when I uploaded it to YouTube, it lost a lot of quality and the preferred large video view looks almost as bad as a 320p video. I tried to wait a few days but it never got sharper (in case it didn't process it completely yet). So, which resolution and encoding options I should use, if I want the large video player to have the sharpest possible video, retaining the original video quality as good as possible? I noticed that recording with 640x480, the video was sharper than with 1280x720, so I'm not sure what im doing wrong here; both were h264. Is it anyhow possible to prevent YouTube from re-encoding the videos? I just wonder how people can make so sharp videos, while mine are all blurry after upload, but before upload they looked fine. I also tried YouTube's suggested bitrates with h264, but it didn't work any better.

  Read the article

• Gathering buslogic SCSI hardware and virtual machine operating system

  - by Julian

  I'm trying to use Powershell to get SCSI hardware from several virtual servers and get the operating system of each specific server. I've managed to get the specific SCSI hardware that I want to find with my code, however I'm unable to figure out how to properly get the operating system of each of the servers. Also, I'm trying to send all the data that I find into a csv log file, however I'm unsure of how you can make a powershell script create multiple columns. Here is my code (almost works but something's wrong): $log = "C:\Users\me\Documents\Scripts\ScsiLog.csv" Get-VM | Foreach-Object { $vm = $_ Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } | Foreach-Object { get-VMGuest -VM $vm } | Foreach-Object{ Write-output $vm.Guest.VmName >> $log } } I don't receive any errors when I run this code however whenever I run it I'm only getting the name of the servers and not the OS. Also I'm not sure what I need to do to make the OS appear in a different column from the name of the server in the csv log that I'm creating. What do I need to change in my code to get the OS version of each virtual machine and output it in a different column in my csv log file? EDIT: Here's a more in depth look at things I've tried that have all failed: Get-VM | Foreach-Object { $vm = $_ $svm = Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } Foreach-Object {get-VMGuest -VM $svm } | Foreach-Object{Write-output $svm >> $log} } #Get-VM | Foreach-Object { # $vm = $_ # Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic"} #| write-host $vm # | Foreach-Object { # # #get-VMGuest -VM $_ | # #write-host $vm # #get-VMGuest -VM $vm } | Foreach-Object{ # #write-output $vm.VmName >> $log # #write-output $vm.guest.VmName, get-VmGuest -VM $vm >> $log NO GOOD # # Write-host $vm.Guest.VmName #+ get-vmGuest -vm $VM >> $log # # # } # } I'm not sure why get-VmGuest fails though. I'm getting the scsi hardware, filtering the hardware to only get buslogic, and then wanting to get the operating system of just the filtered VMs. I don't see where my code fails though.

  Read the article

• how to troubleshoot using rsyslog to output to a mysql database

  - by ChrisNZ

  Using FreeBSD 8.0 32 bit. I have installed rsyslogd 5.5.5 with ommysql. (installed ports /usr/ports/sysutils/rsyslog55 and /usr/ports/sysutils/rsyslog55-mysql) My rsyslog.conf file looks like: $ModLoad imudp $ModLoad imtcp $ModLoad ommysql $ModLoad immark.so $ModLoad imuxsock.so $ModLoad imklog.so $OptimizeForUniprocessor on $AllowedSender UDP, 10.0.0.0/8 $UDPServerAddress 0.0.0.0 $UDPServerRun 514 $UDPServerTimeRequery 2 # +SG560 *.* :ommysql:127.0.0.1,Syslog,sysloguser,mypassword My command line flags for rsyslogd are: -c5 -4 Checking the code with -c5 -N1 returns no errors. I have confirmed that rsyslogd is working by changing the last line to say: *.* /var/log/snapgear.log which results in messages appearing in the snapgear.log file. So it is probably something to do with my MySQL setup If I do: mysql -u sysloguser -p Syslog Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 56 Server version: 5.0.86 FreeBSD port: mysql-server-5.0.86 mysql> select * from SystemEvents; Empty set (0.00 sec) mysql> :-( I have confirmed that sysloguser has full privileges for the Syslog database. If I run rsyslogd on the console in debug mode: /usr/local/sbin/rsyslogd -f /usr/local/etc/rsyslog.conf -c5 -n -d I can see this sequence of events each time a message is received: 9244.376687256:28359280: main Q: entry added, size now log 1, phys 1 entries 9244.376705694:28359280: main Q: EnqueueMsg advised worker start 9244.376726647:28359280: Listening on UDP syslogd socket 4 (IPv4/port 514). 9244.376728602:28359280: --------imUDP calling select, active file descriptors (max 4): 4 9244.376890075:283593c0: wti 0x28306e80: worker awoke from idle processing 9244.376892031:283593c0: we deleted 0 objects and enqueued 0 objects 9244.376893986:283593c0: delete batch from store, new sizes: log 1, phys 1 9244.376895942:283593c0: msgConsumer processes msg 0/1 9244.376897898:283593c0: msg parser: flags 70, from '~NOTRESOLVED~', msg 'Jun 29 17:32:24 SG560 kernel: (20000629T1732244' 9244.376900132:283593c0: parse using parser list 0x283080e8 (the default list). 9244.376902088:283593c0: dropped LF at very end of message (DropTrailingLF is set) 9244.376904044:283593c0: Parser 'rsyslog.rfc5424' returned -2160 9244.376905999:283593c0: Message will now be parsed by the legacy syslog parser (one size fits all... ;)). 9244.376907955:283593c0: Parser 'rsyslog.rfc3164' returned 0 9244.376909910:283593c0: testing filter, f_pmask 255 9244.376911866:283593c0: Called action, logging to ommysql 9244.376918012:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376919967:283593c0: action call returned -2123 9244.376921923:283593c0: tryDoAction: unexpected error code -2123, finalizing 9244.376926113:283593c0: actionTryResume: action state: susp, next retry (if applicable): 1277869250 [now 1277869244] 9244.376928069:283593c0: ruleset: get iRet 0 from rule.ProcessMsg() 9244.376930024:283593c0: ruleset.ProcessMsg() returns 0 9244.376931980:283593c0: regular consumer finished, iret=0, szlog 0 sz phys 1 9244.376933936:283593c0: XXX: enqueueing data element 0 of 1 9244.376935891:283593c0: we deleted 1 objects and enqueued 0 objects 9244.376938126:283593c0: delete batch from store, new sizes: log 0, phys 0 9244.376940082:283593c0: regular consumer finished, iret=4, szlog 0 sz phys 0 9244.376942037:283593c0: main Q:Reg/w0: worker IDLE, waiting for work. .... I can see the Action Call to ommysql returns unexpected error code -2123 Now I am stuck! Any ideas on what to look for next? Perhaps I there are extra ports I need to install? I will be very grateful for any assistance here!

  Read the article

• Windows Server 2008 can't start postgresql-x64-9.0 service: could not create any TCP/IP sockets

  - by Rob

  After rebooting a Windows Server 2008 machine to apply system updates, we recently we began having some issues running PostgreSQL 9.0. When we noticed the problem, we reverted the Windows updates, but the issue persists: From services.msc, attempting to start the postgresql-x64-9.0 service fails. Half-way through starting the progress bar becomes very slow, and eventually responds with error 1053; "the service did not respond in a timely fashion." Interestingly enough, bringing up the task manager shows multiple instances of postgres.exe have been started, and looking at the log file shows: 2011-02-10 14:44:02 ESTLOG: database system is ready to accept connections I then tried killing the processes, and starting via the command-line (as the user postgres), but I receive a different error: C:/Program Files/PostgreSQL/9.0/bin/pg_ctl.exe start -N "postgresql-x64-9.0" -D "F:/SHARE/postgres" -w waiting for server to start............................................................... pg_ctl: could not start server ESTWARNING: could not create listen socket for "192.168.0.101" ESTFATAL: could not create any TCP/IP sockets The log file again indicates that the database is ready to accept connections. Also, using netstat indicates that no other processes are using port 5432; I can't think of any other obvious reason that opening the listen socket might fail. Any help would be greatly appreciated.

  Read the article

• Additional Security Measures for Syslog over SSH

  - by Eric

  I'm currently working on setting up some secure syslog connections between a few Fedora servers. This is my currently setup 192.168.56.110 (syslog-server) <---- 192.168.57.110 (syslog-agent) From the agent, I am running this command: ssh -fnNTx -L 1514:127.0.0.1:514 [email protected] This works just fine. I have rsyslog on the syslog-agent pointing to @@127.0.0.1:1514 and it forwards everything to the server correctly on port 514 via the tunnel. My issue is, I want to be able to lock this down. I am going to use ssh keys so this is automated because there will be multiple agents talking to the server. Here are my concerns. Someone getting on the syslog-agent and logging into the server directly. I have taken care of this by ensuring that syslog_user has a shell of /sbin/nologin so that user can't get a shell at all. I don't want someone to be able to tunnel another port over ssh. Ex. - 6666:127.0.0.1:21. I know my first line of defense against this is to just not have anything listening on those ports and it's not an issue. However I want to be able to lock this down somehow. Are there any sshd_config settings on the server that I can use to make it where only port 514 can be tunneled over ssh? Are there any other major security concerns I'm overlooking at this point? Thanks in advance for your help/comments.

  Read the article

• VLAN Tagging Traffic on Cisco Switch

  - by David W

  I have a situation where I'm setting up multiple VLANS on a pfSense firewall on the same physical interface for a client. So in pfSense, I now have VLAN 100 (employees) and VLAN 200 (students - student computer lab). Downstream from pfSense, I have a Cisco SG200 switch, and coming off of the SG200 is the student lab (running on a Catalyst 2950. Yes, that's old, but it works, and this is a poor nonprofit we're talking about). What I'd like to do is tag everything on the network as VLAN 100, except for the student computer lab. Earlier today when I was on-site with the client, I went into to the old Catalyst 2950, and assigned all of its ports to access VLAN 200 (switchport mode access vlan 200) without setting up a trunk on the Catalyst or on the SG200. Looking back on it, I now understand why internet in the lab broke. I reverted the lab back to the default VLAN1 (we're still running on a different firewall - we haven't deployed pfSense -, and the traffic is still separated physically). So my question is, what do I need to do in order to properly deploy this scenario? I believe the correct answer is: Ensure VLANs 100 and 200 are setup in pfSense, and that DHCP is operating correctly (on separate subnets) Setup a trunkport VLAN that allows both 100 & 200 traffic, and plug that port directly into pfSense. Setup a VLAN 200 trunkport on the SG200 (It's not running iOS, but if it were, the command would be switchport trunk native vlan 200), which will then plug into the Catalyst 2950. Setup a VLAN 200 trunkport on the Catalyst 2950 (that is plugged into the SG200 VLAN200 port with the same command - switchport trunk native vlan 200) Setup the rest of the ports on the old Catalyst 2950 in the lab to be access ports on VLAN200. Is there anything that I'm missing, or do I need to tweak any of these steps, in order to properly segment the network traffic?

  Read the article

• Setting up squid proxy server to in turn connect using another proxy server [closed]

  - by AnkurVj

  My institute uses the Squid proxy server and authentication mechanism requires username and password to be entered. This means that, I can log in on only one machine at a time and Internet access for me is restricted to that machine. I sometimes require Internet access on multiple machines simultaneously. What previosuly worked for me was the following : On one of my own machines A, I set up a Squid proxy server that allowed all local machines without any username and password. I configured rest of the machines to use this machine A as the proxy server. On machine A I logged into the institute proxy server using my browser. This way, I could access Internet from all my machines, by effectively channeling my requests through the server A. Recently, I lost that machine and configuration and now I tried to set it up again in the same manner. However, I cant seem to remember exactly how I made it work. I keep getting Connection Refused (111) on other machines. My guess is that my squid server isnt able to forward requests from other machines to the actual squid server. I could use any help for debugging this problem. I don't want to use alternatives such as ssh tunneling. This solution has worked for me in the past, I just don't remember how to set it up the same way again.

  Read the article

• fwbuilder/iptables manually scripted + autogenerated rules at startup?

  - by Jakobud

  Fedora 11 Our previous IT-guy setup iptable rules on our firewall in a way that is confusing me and he didn't document any of it. I was hoping someone could help me make some sense of it. The iptables service is obviously starting at startup, but the /etc/sysconfig/iptables file was untouched (default values). I found in /etc/rc.local he was doing this: # We have multiple ISP connections on our network. # The following is about 50+ rules to route incoming and outgoing # information. For example, certain internal hosts are specified here # to use ISP A connection while everyone else on the network uses # ISP B connection when access the internet. ip rule add from 99.99.99.99 table Whatever_0 ip rule add from 99.99.99.98 table Whatever_0 ip rule add from 99.99.99.97 table Whatever_0 ip rule add from 99.99.99.96 table Whatever_0 ip rule add from 99.99.99.95 table Whatever_0 ip rule add from 192.168.1.103 table ISB_A ip rule add from 192.168.1.105 table ISB_A ip route add 192.168.0.0/24 dev eth0 table ISB_B # etc... and then near the end of the file, AFTER all the ip rules he just declared, he has this: /root/fw/firewall-rules.fw He's executing the firewall rules file that was auto-generated by fwbuilder. Some questions Why is he declaring all these ip rules in rc.local instead of declaring them in fwbuilder like all the other rules? Any advantage or necessity to this? Or is this just a poorly organized way to implement firewall rules? Why is he declaring ip rules BEFORE executing the fwbuilder script? I would assume that one of the first things the fwbuilder script does it get rid of any existing rules before declaring all the new ones. Am I wrong about this? If that was the case, the fwbuilder script would basically just delete all the ip rules that were defined in rc.local. Does this make any sense? Why is he executing all this stuff at startup in rc.local instead of just using iptables-save to keep the firewall settings at /etc/sysconfig/iptables that will get implemented at runtime?

  Read the article

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• Transferring an SQL Processor License to a virtual hosted environment

  - by Andrew Shepherd

  My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

  Read the article

• overriding default scheduler for blkio requests in cgroups

  - by Aamir Mushtaq

  I am trying to optimize a set of servers that have to reside on single machine. i.e. i can have multiple application server, a DB server and of course a samba server as well in same instance. Now I was looking into several optimizing options available to me. In my quest, i did my tuning of the network stack. coming to the CPU, MEMORY and the BLKIO tweaks, i am using CGROUPS. The problem i am facing is that for enhanced performance in the nature of the applications that i am running, the CFQ Scheduler that is implemented for the BLKIO subsystem is not optimal. I was looking more for a Deadline Scheduler because that will serve my purpose well. My question is whether it is possible for us to change the scheduler in the kernel compilation itself for the BLKIO to Deadline and it will reflect in my usage of [CGROUP hierarchies][3]? Since when running the service cgconf, a new fs is mounted and i dont want it to revert to CFQ scheduler. I also welcome any suggestions that will enable me to have more control over my resources.

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• How can one use online backup with large amounts of static data?

  - by Billy ONeal

  I'd like to setup an offsite backup solution for about 500GB of data that's currently stored between my various machines. I don't care about data retention rates, as this is only a backup of, not primary storage, for my data. If the backup is stored on crappy non-redundant systems, that does not matter. The data set is almost entirely static, and mostly consists of things like installers for Visual Studio, and installer disk images for all of my games. I have found two services which meet most of this: Mozy Carbonite However, both services impose low bandwidth caps, on the order of 50kb/s, which prevent me from backing up a dataset of this size effectively (somewhere on the order of 6 weeks), despite the fact that I get multiple MB/s upload speeds everywhere else from this location. Carbonite has the additional problem that it tries to ignore pretty much every file in my backup set by default, because the files are mostly iso files and vmdk files, which aren't backed up by default. There are other services such as EC2 which don't have such bandwidth caps, but such services are typically stored in highly redundant servers, and therefore cost on the order of 10 cents/gb/month, which is insanely expensive for storage of this kind of data set. (At $50/month I could build my own NAS to hold the data which would pay for itself after ~2-3 months) (To be fair, they're offering quite a bit more service than I'm looking for at that price, such as offering public HTTP access to the data) Does anything exist meeting those requirements or am I basically hosed?

  Read the article

• IIS replication - Is it possible

  - by Ian

  Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

  Read the article

• Routing table on Linux not respected

  - by MRHaarmann

  I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a NAT on the outgoing connections for the VPN peers. Setup is as following: Internet gateway LAN 192.168.25.1/24 VPN Gateway LAN 10.45.99.2/24 (VPN tunnel 10.45.99.1 to net 87.115.17.40/29, separate connection to Internet) Linux VPN Router eth0 192.168.25.71/24 eth0:503 10.45.99.1/24 Default 192.168.25.1 route to 87.115.17.40/29 via 10.45.99.2 (send_redirects disabled, ip_forward enabled) Linux clients (multiple): eth0 192.168.25.x/24 Default 192.168.25.1 route to 87.115.17.40/29 via 192.168.25.71 Ping to the machines via tunnel from the VPN Router is working. Now I want to establish a routing from my clients over the VPN gateway and the client packet gets routed to 192.168.25.1 ! traceroute output shows the packets get routed to 192.168.25.71, but then to 192.168.25.1. So the route is not respected in forward ! IPTables and Routing: ip route show 87.115.17.40/29 via 10.45.99.2 dev eth0 10.45.99.0/24 dev eth0 proto kernel scope link src 10.45.99.1 192.168.25.0/24 dev eth0 proto kernel scope link src 192.168.25.71 default via 192.168.25.1 dev eth0 iptables -A INPUT -i eth0:503 -j REJECT iptables -t nat -A POSTROUTING -o eth0:503 -j MASQUERADE iptables -A FORWARD -i eth0:503 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 192.168.25.0/24 -o eth0:503 -j ACCEPT So what is wrong with my setup ? The route is chosen correctly from localhost, but all the clients get forwarded to the Internet GW. thanks for helping, Marcus

  Read the article

• Do eSATA HDD docking stations have a capacity limit?

  - by Michael Kjörling

  I'm looking at perhaps buying an eSATA docking station to be able to easily plug in and unplug hard disk drives, particularly but not necessarily only for backup purposes. Note: This is not a hardware shopping recommendation question. Please don't vote to close it as such. Looking at different models, I find for example this page detailing the Deltaco SI-7908SUS which specifically states "storage capacity: 1.5 TB" as well as "pictured hard disk not included, only for illustration". A customer review specifically mentions that it does not work with 3 TB drives, although does not go into any detail such as OS, drive model, etc. From a brief glance, the vendor's web site does not appear to say either way. Then there is the quite similar Deltaco SI-7908B3 which boasts on the box "all 2.5" and 3.5" HDD/SSD compatible". My question is: Why would what basically amounts to a SATA/eSATA adapter have any say in what storage capacity devices are supported? Does it? Assuming the OS supports the full capacity of the drive, why should introducing another (not even a different, really) connector change anything? Bonus question: Might it make a difference if the docking station exposes multiple interfaces (such as in the case of for example the SI-7908SUS exposing USB 2.0 and eSATA)? (I still think it shouldn't, but it'd be nice to have it confirmed.)

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• Docking Station Sound Doesn't Work on Dell D830 with Windows 7

  - by cisellis

  I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• RTorrent stops my torrents, crashes, and I have to manually re-add torrents and start them. How can I stop this cycle of doom?

  - by meder

  I cannot use transmission which is the best torrent client because it's banned from one of the trackers I use, so I am forced to use rtorrent. Normally I am all for command-line programs, however rtorrent ( 0.8.6/0.12.6 ) is simply frustrating. It is not intuitive, imo. I have 400 MB left on the HD and that's more than enough to dl this 200 MB avi. Rtorrent stops the download, though. It says [CLOSED] near the torrent. I do ctrl-r and that invokes the local hash check, and after that's done rtorrent simply dies ( wtf? ). Afterwards, it gives me rtorrent: TrackerManager::send_later() m_control->set() == DownloadInfo::STOPPED. So that leads me to open rtorrent again, then hit ENTER and /home/meder/file.avi.torrent, down arrow, and ctrl-S. I am looking for multiple things... How can I tell rtorrent to not worry about disk space? Again, it stops the torrent if my HD only has 400 mb when the torrent I'm dling is 200 mb ( there are no other torrents ). Why does ctrl-R fail hard? Why does it cause rtorrent to crash? If #2 is not solvable, can someone provide an easy way to add a torrent and start it, a more efficient method than typing the torrent name, hitting the down arrow, and ctrl-S?

  Read the article

< Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >