Search Results

Search found 37966 results on 1519 pages for 'string compare'.

Page 821/1519 | < Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >

• Still prompted for a password after adding SSH public key to a server

  - by Nathan Arthur

  I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing? EDIT: SSH -v Log: Macbook:~ michaeleckert$ ssh -v [USER]@[SERVER URL] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug1: Connecting to [SERVER URL] [[SERVER IP]] port 22. debug1: Connection established. debug1: identity file /Users/michaeleckert/.ssh/id_rsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_rsa-cert type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze3 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze3 pat OpenSSH_5* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA [STRING OF NUMBERS AND LETTERS SEPARATED BY SEMI-COLONS] debug1: Host ‘[SERVER URL]' is known and matches the RSA host key. debug1: Found key in /Users/michaeleckert/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/michaeleckert/.ssh/id_rsa debug1: Trying private key: /Users/michaeleckert/.ssh/id_dsa debug1: Next authentication method: password [USER]@[SERVER URL]'s password: debug1: Authentication succeeded (password). Authenticated to [SERVER URL] ([[SERVER IP]]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.UTF-8 Welcome to [SERVER URL] Any malicious and/or unauthorized activity is strictly forbidden. All activity may be logged by DreamHost Web Hosting. Last login: Sun Nov 3 12:04:21 2013 from [MY IP] [[SERVER NAME]]$

  Read the article

• Using Dynamic LINQ to get a filter for my Web API

  - by Espo

  We are considering using the Dynamic.CS linq-sample included in the "Samples" directory of visual studio 2008 for our WebAPI project to allow clients to query our data. The interface would be something like this (In addition to the normal GET-methods): public HttpResponseMessage List(string filter = null); The plan is to use the dynamic library to parse the "filter"-variable and then execute the query agains the DB. Any thoughts if this is a good idea? Is it a security problem?

  Read the article

• Savable in Widget Lookup on Move Action

  - by Geertjan

  Possible from 7.3 onwards, since Widget now implements Lookup.Provider for the first time: import java.awt.Point; import java.io.IOException; import org.netbeans.api.visual.action.ActionFactory; import org.netbeans.api.visual.action.MoveProvider; import org.netbeans.api.visual.widget.LabelWidget; import org.netbeans.api.visual.widget.Scene; import org.netbeans.api.visual.widget.Widget; import org.netbeans.spi.actions.AbstractSavable; import org.openide.util.Lookup; import org.openide.util.lookup.AbstractLookup; import org.openide.util.lookup.InstanceContent; import org.openide.windows.TopComponent; public class MyWidget extends LabelWidget { private MySavable mySavable; private Lookup lookup; private TopComponent tc; private InstanceContent ic; public MyWidget(Scene scene, String label, TopComponent tc) { super(scene, label); this.tc = tc; ic = new InstanceContent(); getActions().addAction(ActionFactory.createMoveAction(null, new MoveStrategyProvider())); } @Override public Lookup getLookup() { if (lookup == null) { lookup = new AbstractLookup(ic); } return lookup; } private class MoveStrategyProvider implements MoveProvider { @Override public void movementStarted(Widget widget) { } @Override public void movementFinished(Widget widget) { modify(); } @Override public Point getOriginalLocation(Widget widget) { return ActionFactory.createDefaultMoveProvider().getOriginalLocation(widget); } @Override public void setNewLocation(Widget widget, Point point) { ActionFactory.createDefaultMoveProvider().setNewLocation(widget, point); } } private void modify() { if (getLookup().lookup(MySavable.class) == null) { ic.add(mySavable = new MySavable()); } } private class MySavable extends AbstractSavable { public MySavable() { register(); } TopComponent tc() { return tc; } @Override protected String findDisplayName() { return getLabel(); } @Override protected void handleSave() throws IOException { ic.remove(mySavable); unregister(); } @Override public boolean equals(Object obj) { if (obj instanceof MySavable) { MySavable m = (MySavable) obj; return tc() == m.tc(); } return false; } @Override public int hashCode() { return tc().hashCode(); } } }

  Read the article

• Binding MediaElement to a ViewModel in a Windows 8 Store App

  - by jdanforth

  If you want to play a video from your video-library in a MediaElement control of a Metro Windows Store App and tried to bind the Url of the video file as a source to the MediaElement control like this, you may have noticed it’s not working as well for you: <MediaElement Source="{Binding Url}" /> I have no idea why it’s not working, but I managed to get it going using  ContentControl instead: <ContentControl Content="{Binding Video}" /> The code behind for this is: protected override void OnNavigatedTo(NavigationEventArgs e) {     _viewModel = new VideoViewModel("video.mp4");     DataContext = _viewModel; } And the VideoViewModel looks like this: public class VideoViewModel {     private readonly MediaElement _video;     private readonly string _filename;       public VideoViewModel(string filename)     {         _filename = filename;         _video = new MediaElement { AutoPlay = true };         //don't load the stream until the control is ready         _video.Loaded += VideoLoaded;     }       public MediaElement Video     {         get { return _video; }     }       private async void VideoLoaded(object sender, RoutedEventArgs e)     {         var file = await KnownFolders.VideosLibrary.GetFileAsync(_filename);         var stream = await file.OpenAsync(FileAccessMode.Read);         _video.SetSource(stream, file.FileType);     } } I had to wait for the MediaElement.Loaded event until I could load and set the video stream.

  Read the article

• So, I though I wanted to learn frontend/web development and break out of my comfort zone...

  - by ripper234

  I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

  Read the article

• Switch from back-end to front-end programming: I'm out of my comfort zone, should I switch back?

  - by ripper234

  I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

  Read the article

• Bukkit saving inventory

  - by HcgRandon

  Alright i will make this quick... I am working on a command in my plugin to allow you to transfer worlds and i am trying to save inventory but i am getting a problem here is the code: public void savePlayerInv(Player p, World w){ File playerInvConfigFile = new File(plugin.getDataFolder() + File.separator + "players" + File.separator + p.getName(), "inventory.yml"); FileConfiguration pInv = YamlConfiguration.loadConfiguration(playerInvConfigFile); PlayerInventory inv = p.getInventory(); int i = 0; for (ItemStack stack : inv.getContents()) { //increment integer i++; String startInventory = w.getName() + ".inv." + Integer.toString(i); //save inv pInv.set(startInventory + ".amount", stack.getAmount()); pInv.set(startInventory + ".durability", Short.toString(stack.getDurability())); pInv.set(startInventory + ".type", stack.getTypeId()); //pInv.set(startInventory + ".enchantment", stack.getEnchantments()); //TODO add enchant saveing } i = 0; for (ItemStack armor : inv.getArmorContents()){ i++; String startArmor = w.getName() + ".armor." + Integer.toString(i); //save armor pInv.set(startArmor + ".amount", armor.getAmount()); pInv.set(startArmor + ".durability", armor.getDurability()); pInv.set(startArmor + ".type", armor.getTypeId()); //pInv.set(startArmor + ".enchantment", armor.getEnchantments()); } //save exp if (p.getExp() != 0) { pInv.set(w.getName() + ".exp", p.getExp()); } } Now here is the stack trace i recive it is commplaing about line 130 which is this line pInv.set(startInventory + ".amount", stack.getAmount()); okay now trace 2012-03-21 13:23:25 [SEVERE] null org.bukkit.command.CommandException: Unhandled exception executing command 'wtp' in plugin Needs v1.0 at org.bukkit.command.PluginCommand.execute(PluginCommand.java:42) at org.bukkit.command.SimpleCommandMap.dispatch(SimpleCommandMap.java:166) at org.bukkit.craftbukkit.CraftServer.dispatchCommand(CraftServer.java:461) at net.minecraft.server.NetServerHandler.handleCommand(NetServerHandler.java:818) at net.minecraft.server.NetServerHandler.chat(NetServerHandler.java:778) at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:761) at net.minecraft.server.Packet3Chat.handle(Packet3Chat.java:33) at net.minecraft.server.NetworkManager.b(NetworkManager.java:229) at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:112) at net.minecraft.server.NetworkListenThread.a(NetworkListenThread.java:78) at net.minecraft.server.MinecraftServer.w(MinecraftServer.java:554) at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:452) at net.minecraft.server.ThreadServerApplication.run(SourceFile:490) Caused by: java.lang.NullPointerException at com.devoverflow.improved.needs.commands.CommandWorldtp.savePlayerInv(CommandWorldtp.java:130) at com.devoverflow.improved.needs.commands.CommandWorldtp.onCommand(CommandWorldtp.java:60) at org.bukkit.command.PluginCommand.execute(PluginCommand.java:40) ... 12 more

  Read the article

• C# Preprocessor Directives

  - by MarkPearl

  Going back to my old c++ days at university where we had all our code littered with preprocessor directives - I thought it made the code ugly and could never understand why it was useful. Today though I found a use in my C# application. The scenario – I had made various security levels in my application and tied my XAML to the levels by set by static accessors in code. An example of my XAML code for a Combobox to be enabled would be as follows… <ComboBox IsEnabled="{x:Static security:Security.SecurityCanEditDebtor}" />   And then I would have a static method like this… public static bool SecurityCanEditDebtorPostalAddress { get { if (SecurityCanEditDebtorPostalAddress) { return true; } else { return false; } } } My only problem was that my XAML did not like the if statement – which meant that while my code worked during runtime, during design time in VS2010 it gave some horrible error like… NullReferenceException was thrown on “StatiucExtension”: Exception has been thrown by the target of an invocation… If however my C# method was changed to something like this… public static bool SecurityCanEditDebtorPostalAddress { get { return true; } }   My XAML viewer would be happy. But of course this would bypass my security… <Drum Roll> Welcome preprocessor directives… what I wanted was during my design experience to totally remove the “if” code so that my accessor would return true and not have any if statements, but when I release my project to the big open world, I want the code to have the is statement. With a bit of searching I found the relevant MSDN sample and my code now looks like this… public static bool SecurityCanEditDebtorPostalAddress { get { #if DEBUG return true; #else if (Settings.GetInstance().CurrentUser.SecurityCanEditDebtorPostalAddress) { return true; } else { return false; } #endif } }   Not the prettiest beast, but it works. Basically what is being said here is that during my debug mode compile my code with just the code between the #if … #else block, but what I can now do is if I want to universally switch everything to the “if else” statement, I just go to my project properties –> Build and change the “Debug” flag as illustrated in the picture below. Also note that you can define your own conditional compilation symbols, and if you even wanted to you could skip the whole properties page and define them in code using the #define & #undef directives. So while I don’t like the way the code works and would like to look more into AOP and compare it to this method, it works for now.

  Read the article

• How to Plug a Small Hole in NetBeans JSF (Join Table) Code Generation

  - by MarkH

  I was asked recently to provide an assist with designing and building a small-but-vital application that had at its heart some basic CRUD (Create, Read, Update, & Delete) functionality, built upon an Oracle database, to be accessible from various locations. Working from the stated requirements, I fleshed out the basic application and database designs and, once validated, set out to complete the first iteration for review. Using SQL Developer, I created the requisite tables, indices, and sequences for our first run. One of the tables was a many-to-many join table with three fields: one a primary key for that table, the other two being primary keys for the other tables, represented as foreign keys in the join table. Here is a simplified example of the trio of tables: Once the database was in decent shape, I fired up NetBeans to let it have first shot at the code. NetBeans does a great job of generating a mountain of essential code, saving developers what must be millions of hours of effort each year by building a basic foundation with a few clicks and keystrokes. Lest you think it (or any tool) can do everything for you, however, occasionally something tosses a paper clip into the delicate machinery and makes you open things up to fix them. Join tables apparently qualify.  :-) In the case above, the entity class generated for the join table (New Entity Classes from Database) included an embedded object consisting solely of the two foreign key fields as attributes, in addition to an object referencing each one of the "component" tables. The Create page generated (New JSF Pages from Entity Classes) worked well to a point, but when trying to save, we were greeted with an error: Transaction aborted. Hmm. A quick debugger session later and I'd identified the issue: when trying to persist the new join-table object, the embedded "foreign-keys-only" object still had null values for its two (required value) attributes...even though the embedded table objects had populated key attributes. Here's the simple fix: In the join-table controller class, find the public String create() method. It will look something like this:     public String create() {        try {            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } To restore balance to the force, modify the create() method as follows (changes in red):     public String create() {         try {            // Add the next two lines to resolve:            current.getJoinEntityPK().setTbl1id(current.getTbl1().getId().toBigInteger());            current.getJoinEntityPK().setTbl2id(current.getTbl2().getId().toBigInteger());            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } I'll be refactoring this code shortly, but for now, it works. Iteration one is complete and being reviewed, and we've met the milestone. Here's to happy endings (and customers)! All the best,Mark

  Read the article

• Building an ASP.Net 4.5 Web forms application - part 5

  - by nikolaosk

  ?his is the fifth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line. There are 4 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here.You can find the fourth here.  In this new post we will build on the previous posts and we will demonstrate how to display the details of a poster when the user clicks on an individual poster photo/link. We will add a FormView control on a web form and will bind data from the database. FormView is a great web server control for displaying the details of a single record. 1) Launch Visual Studio and open your solution where your project lives2) Add a new web form item on the project.Make sure you include the Master Page.Name it PosterDetails.aspx 3) Open the PosterDetails.aspx page. We will add some markup in this page. Have a look at the code below <asp:Content ID="Content2" ContentPlaceHolderID="FeaturedContent" runat="server">    <asp:FormView ID="posterDetails" runat="server" ItemType="PostersOnLine.DAL.Poster" SelectMethod ="GetPosterDetails">        <ItemTemplate>            <div>                <h1><%#:Item.PosterName %></h1>            </div>            <br />            <table>                <tr>                    <td>                        <img src="<%#:Item.PosterImgpath %>" border="1" alt="<%#:Item.PosterName %>" height="300" />                    </td>                    <td style="vertical-align: top">                        <b>Description:</b><br /><%#:Item.PosterDescription %>                        <br />                        <span><b>Price:</b>&nbsp;<%#: String.Format("{0:c}", Item.PosterPrice) %></span>                        <br />                        <span><b>Poster Number:</b>&nbsp;<%#:Item.PosterID %></span>                        <br />                    </td>                </tr>            </table>        </ItemTemplate>    </asp:FormView></asp:Content> I set the ItemType property to the Poster entity class and the SelectMethod to the GetPosterDetails method.The Item binding expression is available and we can retrieve properties of the Poster object.I retrieve the name, the image,the description and the price of each poster. 4) Now we need to write the GetPosterDetails method.In the code behind of the PosterDetails.aspx page we type public IQueryable<Poster> GetPosterDetails([QueryString("PosterID")]int? posterid)        {                    PosterContext ctx = new PosterContext();            IQueryable<Poster> query = ctx.Posters;            if (posterid.HasValue && posterid > 0)            {                query = query.Where(p => p.PosterID == posterid);            }            else            {                query = null;            }            return query;        } I bind the value from the query string to the posterid parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable PosterID.If there is a matching poster it is fetched from the database.If not,there is no data at all coming back from the database. 5) I run my application and then click on the "Midfielders" link.Then click on the first poster that appears from the left (Kenny Dalglish) and click on it to see the details. Have a look at the picture below to see the results.   You can see that now I have all the details of the poster in a new page.?ake sure you place breakpoints in the code so you can see what is really going on. Hope it helps!!!

  Read the article

• More elegant way to avoid hard coding the format of a a CSV file?

  - by dsollen

  I know this is trivial issue, but I just feel this can be more elegant. So I need to write/read data files for my program, lets say they are CSV for now. I can implement the format as I see fit, but I may have need to change that format later. The simply thing to do is something like out.write(For.getValue()+","+bar.getMinValue()+","+fi.toString()); This is easy to write, but obviously is guilty of hard coding and the general 'magic number' issue. The format is hard-coded, requires parsing of the code to figure out the file format, and changing the format requires changing multiple methods. I could instead have my constants specifying the location that I want each variable to be saved in the CSV file to remove some of the 'magic numbers'; then save/load into the an array at the location specified by the constants: int FOO_LOCATION=0; int BAR_MIN_VAL_LOCATION=1; int FI_LOCATION=2 int NUM_ARGUMENTS=3; String[] outputArguments=new String[NUM_ARGUMENTS]; outputArguments[FOO_LOCATION] = foo.getValue(); outputArgumetns[BAR_MIN_VAL_LOCATION] = bar.getMinValue(); outptArguments[FI_LOCATOIN==fi.toString(); writeAsCSV(outputArguments); But this is...extremely verbose and still a bit ugly. It makes it easy to see the format of existing CSV and to swap the location of variables within the file easily. However, if I decide to add an extra value to the csv I need to not only add a new constant, but also modify the read and write methods to add the logic that actually saves/reads the argument from the array; I still have to hunt down every method using these variables and change them by hand! If I use Java enums I can clean this up slightly, but the real issue is still present. Short of some sort of functional programming (and java's inner classes are too ugly to be considered functional) I still have no obvious way of clearly expressing what variable is associated with each constant short of writing (and maintaining) it in the read/write methods. For instance I still need to write somewhere that the FOO_LOCATION specifies the location of foo.getValue(). It seems as if there should be a prettier, easier to maintain, manner for approaching this? Incidentally, I'm working in java at the moment, however, I am interested conceptually about the design approach regardless of language. Some library in java that does all the work for me is definitely welcome (though it may prove more hassle to get permission to add it to the codebase then to just write something by hand quickly), but what I'm really asking is more about how to write elegant code if you had to do this by hand.

  Read the article

• Our own Daily WTF

  - by Dennis Vroegop

  Originally posted on: http://geekswithblogs.net/dvroegop/archive/2014/08/20/our-own-daily-wtf.aspxIf you're a developer, you've probably heard of the website the DailyWTF. If you haven't, head on over to http://www.thedailywtf.com and read. And laugh. I'll wait. Read it? Good. If you're a bit like me probably you've been wondering how on earth some people ever get hired as a software engineer. Most of the stories there seem to weird to be true: no developer would write software like that right? And then you run into a little nugget of code one of your co-workers wrote. And then you realize: "Hey, it happens everywhere!" Look at this piece of art I found in our codebase recently: public static decimal ToDecimal(this string input) {     System.Globalization.CultureInfo cultureInfo = System.Globalization.CultureInfo.InstalledUICulture;     var numberFormatInfo = (System.Globalization.NumberFormatInfo)cultureInfo.NumberFormat.Clone();     int dotIndex = input.IndexOf(".");     int commaIndex = input.IndexOf(",");     if (dotIndex > commaIndex)         numberFormatInfo.NumberDecimalSeparator = ".";     else if (commaIndex > dotIndex)         numberFormatInfo.NumberDecimalSeparator = ",";     decimal result;     if (decimal.TryParse(input, System.Globalization.NumberStyles.Float, numberFormatInfo, out result))         return result;     else         throw new Exception(string.Format("Invalid input for decimal parsing: {0}. Decimal separator: {1}.", input, numberFormatInfo.NumberDecimalSeparator)); }  Me and a collegue have been looking long and hard at this and what we concluded was the following: Apparently, we don't trust our users to be able to correctly set the culture in Windows. Users aren't able to determine if they should tell Windows to use a decimal point or a comma to display numbers. So what we've done here is make sure that whatever the user enters, we'll translate that into whatever the user WANTS to enter instead of what he actually did. So if you set your locale to US, since you're a US citizen, but you want to enter the number 12.34 in the Dutch style (because, you know, the Dutch are way cooler with numbers) so you enter 12,34 we will understand this and respect your wishes! Of course, if you change your mind and in the next input field you decide to use the decimal dot again, that's fine with us as well. We will do the hard work. Now, I am all for smart software. Software that can handle all sorts of input the user can think of. But this feels a little uhm, I don't know.. wrong.. Or am I too old fashioned?

  Read the article

• Text To Image With Rotation For The Web

  This article will explain how to create an HttpHandler that will accept a text string, optionally rotate it, and return an image of the rotated text.

  Read the article

• Bukkit inventory saving: crashing somewhere

  - by HcgRandon

  I'm working on a command for a bukkit plugin that lets you transfer worlds. In the section about saving the player's inventory, I'm getting a runtime error. My question is: Why is the error happening, and how can I prevent it? The plugin code public void savePlayerInv(Player p, World w){ File playerInvConfigFile = new File(plugin.getDataFolder() + File.separator + "players" + File.separator + p.getName(), "inventory.yml"); FileConfiguration pInv = YamlConfiguration.loadConfiguration(playerInvConfigFile); PlayerInventory inv = p.getInventory(); int i = 0; for (ItemStack stack : inv.getContents()) { //increment integer i++; String startInventory = w.getName() + ".inv." + Integer.toString(i); //save inv pInv.set(startInventory + ".amount", stack.getAmount()); pInv.set(startInventory + ".durability", Short.toString(stack.getDurability())); pInv.set(startInventory + ".type", stack.getTypeId()); //pInv.set(startInventory + ".enchantment", stack.getEnchantments()); //TODO add enchant saveing } i = 0; for (ItemStack armor : inv.getArmorContents()){ i++; String startArmor = w.getName() + ".armor." + Integer.toString(i); //save armor pInv.set(startArmor + ".amount", armor.getAmount()); pInv.set(startArmor + ".durability", armor.getDurability()); pInv.set(startArmor + ".type", armor.getTypeId()); //pInv.set(startArmor + ".enchantment", armor.getEnchantments()); } //save exp if (p.getExp() != 0) { pInv.set(w.getName() + ".exp", p.getExp()); } } The offending line The stack trace complains about line 130, which is this line. pInv.set(startInventory + ".amount", stack.getAmount()); The stack trace 2012-03-21 13:23:25 [SEVERE] null org.bukkit.command.CommandException: Unhandled exception executing command 'wtp' in plugin Needs v1.0 at org.bukkit.command.PluginCommand.execute(PluginCommand.java:42) at org.bukkit.command.SimpleCommandMap.dispatch(SimpleCommandMap.java:166) at org.bukkit.craftbukkit.CraftServer.dispatchCommand(CraftServer.java:461) at net.minecraft.server.NetServerHandler.handleCommand(NetServerHandler.java:818) at net.minecraft.server.NetServerHandler.chat(NetServerHandler.java:778) at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:761) at net.minecraft.server.Packet3Chat.handle(Packet3Chat.java:33) at net.minecraft.server.NetworkManager.b(NetworkManager.java:229) at net.minecraft.server.NetServerHandler.a(NetServerHandler.java:112) at net.minecraft.server.NetworkListenThread.a(NetworkListenThread.java:78) at net.minecraft.server.MinecraftServer.w(MinecraftServer.java:554) at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:452) at net.minecraft.server.ThreadServerApplication.run(SourceFile:490) Caused by: java.lang.NullPointerException at com.devoverflow.improved.needs.commands.CommandWorldtp.savePlayerInv(CommandWorldtp.java:130) at com.devoverflow.improved.needs.commands.CommandWorldtp.onCommand(CommandWorldtp.java:60) at org.bukkit.command.PluginCommand.execute(PluginCommand.java:40) ... 12 more

  Read the article

• Why do we need to put N before strings in Microsoft SQL Server?

  - by user61752

  I'm learning T-SQL. From the examples I've seen, to insert text in a varchar() cell, I can write just the string to insert, but for nvarchar() cells, every example prefix the strings with the letter N. I tried the following query on a table which has nvarchar() rows, and it works fine, so the prefix N is not required: insert into [TableName] values ('Hello', 'World') Why the strings are prefixed with N in every example I've seen? What are the pros or cons of using this prefix?

  Read the article

• Iron Mountain Snaps Up Mimosa Systems

  The $112 million cash purchase is the latest in a string of acquisitions and gives Iron Mountain an on-premises archiving option to pair with its popular cloud-based archiving offering.

  Read the article

• Is there a factory pattern to prevent multiple instances for same object (instance that is Equal) good design?

  - by dsollen

  I have a number of objects storing state. There are essentially two types of fields. The ones that uniquely define what the object is (what node, what edge etc), and the others that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methods, so all these objects act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approach which accepts a Builder object and constructs the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquely defines the type of object (this is node A to node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows its state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overriding of serialization methods to make it work (ensure that when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in its place), as well as using a weakHashMap as if it was a weakHashSet to know whether an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to its own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state that is different than my memory; to tell my memory when its own state is inconsistent. I believe this is possible despite their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect that I'm posting).

  Read the article

• LINQ to Twitter v2.1.09 Released

  - by Joe Mayo

  Originally posted on: http://geekswithblogs.net/WinAZ/archive/2013/10/15/linq-to-twitter-v2.1.09-released.aspxToday, I released LINQ to Twitter v2.1.09. Here are important new changes. Bug Fixes This is primarily a bug fix release. Most notably, there were authentication problems in WinRT apps. This is now fixed. New Features One new feature is the addition of ApplicationOnlyAuthentication for WinRT. It is fully async.  Here’s how it works: var auth = new WinRtApplicationOnlyAuthorizer { Credentials = new InMemoryCredentials { ConsumerKey = "", ConsumerSecret = "" } }; if (auth == null || !auth.IsAuthorized) { await auth.AuthorizeAsync(); } var twitterCtx = new TwitterContext(auth); (from search in twitterCtx.Search where search.Type == SearchType.Search && search.Query == SearchTextBox.Text select search) .MaterializedAsyncCallback( async response => await Dispatcher.RunAsync( CoreDispatcherPriority.Normal, async () => { Search searchResponse = response.State.Single(); string message = string.Format( "Search returned {0} statuses", searchResponse.Statuses.Count); await new MessageDialog(message, "Search Complete").ShowAsync(); })); It’s called the WinRtApplicationOnlyAuthorizer. You only need two tokens, ConsumerKey and ConsumerSecret, which come from your Twitter API application settings page. Note: You need a Twitter Application, which you can create at https://dev.twitter.com/. The MaterializedAsyncCallback materializes your query and handles the response. I put everything together in a lambda for demonstration purposes, but you can always replace the callback with a handler of type Action<TwitterAsyncResponse<IEnumerable<T>>>, where T is Search for this example. On the Horizon The next version of LINQ to Twitter is in development. I discussed it at LINQ to Twitter Async. This isn’t complete, but you can download the source code at the LINQ to Twitter site on CodePlex. I’ve competed all the spikes for what I thought would be the hard parts and now have prototypes of queries and commands working. This would be a good time to provide feedback if there are features in the current version that you think could be improved. The current driving forces for the next version will be async and PCL.   @JoeMayo

  Read the article

• Improve Your Online Money Making Opportunities With Organic Search Engine Optimization

  Sometimes called natural, pure or untainted searches as compared to paid, tainted searches, Organic search listings are free listings by the search engines provided when users look for keywords.  Keywords are simply a string of words that people type into a search engine when they are looking for something.

  Read the article

• Nifty popup fails to register

  - by Snailer

  I'm new to Nifty GUI, so I'm following a tutorial here for making popups. For now, I'm just trying to get a very basic "test" popup to show, but I get multiple errors and none of them make much sense. To show a popup, I believe it is necessary to first have a Nifty Screen already showing, which I do. So here is the ScreenController for the working Nifty Screen: public class WorkingScreen extends AbstractAppState implements ScreenController { //Main is my jme SimpleApplication private Main app; private Nifty nifty; private Screen screen; public WorkingScreen() {} public void equip(String slotstr) { int slot = Integer.valueOf(slotstr); System.out.println("Equipping item in slot "+slot); //Here's where it STOPS working. app.getPlayer().registerPopupScreen(nifty); System.out.println("Registered new popup"); Element ele = nifty.createPopup(app.getPlayer().POPUP); System.out.println("popup is " +ele); nifty.showPopup(nifty.getCurrentScreen(), ele.getId(), null); } @Override public void initialize(AppStateManager stateManager, Application app) { super.initialize(stateManager, app); this.app = (Main)app; } @Override public void update(float tpf) { /** jME update loop! */ } public void bind(Nifty nifty, Screen screen) { this.nifty = nifty; this.screen = screen; } When I call equip(0) the system prints Equipping item in slot 0, then a lot of errors and none of the subsequent println()'s. Clearly it botches somewhere in Player.registerPopupScreen(Nifty nifty). Here's the method: public final String POPUP = "Test Popup"; public void registerPopupScreen(Nifty nifty) { System.out.println("Attempting new popup"); PopupBuilder b = new PopupBuilder(POPUP) {{ childLayoutCenter(); backgroundColor("#000a"); panel(new PanelBuilder() {{ id("List"); childLayoutCenter(); height(percentage(75)); width(percentage(50)); control(new ButtonBuilder("TestButton") {{ label("TestButton"); width("120px"); height("40px"); align(Align.Center); }}); }}); }}; System.out.println("PopupBuilder success."); b.registerPopup(nifty); System.out.println("Registerpopup success."); } Because that first println() doesn't show, it looks like this method isn't even called at all! Edit After removing all calls on the Player object, the popup works. It seems I'm not "allowed" to access the player from the ScreenController. Unfortunate, since I need information on the player for the popup. Is there a workaround?

  Read the article

• Adding JavaScript to your code dependent upon conditions

  - by DavidMadden

  You might be in an environment where you code is source controlled and where you might have build options to different environments.  I recently encountered this where the same code, built on different configurations, would have the website at a different URL.  If you are working with ASP.NET as I am you will have to do something a bit crazy but worth while.  If someone has a more efficient solution please share. Here is what I came up with to make sure the client side script was placed into the HEAD element for the Google Analytics script.  GA wants to be the last in the HEAD element so if you are doing others in the Page_Load then you should do theirs last. The settings object below is an instance of a class that holds information I collection.  You could read from different sources depending on where you stored your unique ID for Google Analytics. *** This has been formatted to fit this screen. *** if (!IsPostBack) { if (settings.GoogleAnalyticsID != null || settings.GoogleAnalyticsID != string.Empty) { string str = @"//<!CDATA[ var _gaq = _gaq || []; _gaq.push(['_setAccount', '"  + settings.GoogleAnalyticsID + "']); _gaq.push(['_trackPageview']);  (function () {  var ga = document.createElement('script');  ga.type = 'text/javascript';  ga.async = true;  ga.src = ('https:' == document.location.protocol  ? 'https://ssl' :  'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0];  s.parentNode.insertBefore(ga, s);})();"; System.Web.UI.HtmlControls.HtmlGenericControl si =  new System.Web.UI.HtmlControls.HtmlGenericControl(); si.TagName = "script"; si.Attributes.Add("type", @"text/javascript"); si.InnerHtml = sb.ToString(); this.Page.Header.Controls.Add(si); } } The code above will prevent the code from executing if it is a PostBack and then if the ID was not able to be read or something caused the settings to be lost by accident. If you have larger function to declare, you can use a StringBuilder to separate the lines. This is the most compact I wished to go and manage readability.

  Read the article

• Entity Framework 5, separating business logic from model - Repository?

  - by bnice7

  I am working on my first public-facing web application and I’m using MVC 4 for the presentation layer and EF 5 for the DAL. The database structure is locked, and there are moderate differences between how the user inputs data and how the database itself gets populated. I have done a ton of reading on the repository pattern (which I have never used) but most of my research is pushing me away from using it since it supposedly creates an unnecessary level of abstraction for the latest versions of EF since repositories and unit-of-work are already built-in. My initial approach is to simply create a separate set of classes for my business objects in the BLL that can act as an intermediary between my Controllers and the DAL. Here’s an example class: public class MyBuilding { public int Id { get; private set; } public string Name { get; set; } public string Notes { get; set; } private readonly Entities _context = new Entities(); // Is this thread safe? private static readonly int UserId = WebSecurity.GetCurrentUser().UserId; public IEnumerable<MyBuilding> GetList() { IEnumerable<MyBuilding> buildingList = from p in _context.BuildingInfo where p.Building.UserProfile.UserId == UserId select new MyBuilding {Id = p.BuildingId, Name = p.BuildingName, Notes = p.Building.Notes}; return buildingList; } public void Create() { var b = new Building {UserId = UserId, Notes = this.Notes}; _context.Building.Add(b); _context.SaveChanges(); // Set the building ID this.Id = b.BuildingId; // Seed 1-to-1 tables with reference the new building _context.BuildingInfo.Add(new BuildingInfo {Building = b}); _context.GeneralInfo.Add(new GeneralInfo {Building = b}); _context.LocationInfo.Add(new LocationInfo {Building = b}); _context.SaveChanges(); } public static MyBuilding Find(int id) { using (var context = new Entities()) // Is this OK to do in a static method? { var b = context.Building.FirstOrDefault(p => p.BuildingId == id && p.UserId == UserId); if (b == null) throw new Exception("Error: Building not found or user does not have access."); return new MyBuilding {Id = b.BuildingId, Name = b.BuildingInfo.BuildingName, Notes = b.Notes}; } } } My primary concern: Is the way I am instantiating my DbContext as a private property thread-safe, and is it safe to have a static method that instantiates a separate DbContext? Or am I approaching this all wrong? I am not opposed to learning up on the repository pattern if I am taking the total wrong approach here.

  Read the article

• Display system information

  - by Robottinosino

  I would like output akin to that of OSX's system_profiler (https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man8/system_profiler.8.html) On Ubuntu, I have to string a few utilities togeter: uname -a, lshw, ifconfig, etc... and then extract the list of installed software packages... Is there a single, simple facade to getting human readable system info from the CLI?

  Read the article

• How to avoid oscillation by async event based systems?

  - by inf3rno

  Imagine a system where there are data sources which need to be kept in sync. A simple example is model - view data binding by MVC. Now I intend to describe these kind of systems with data sources and hubs. Data sources are publishing and subscribing for events and hubs are relaying events to data sources. By handling an event a data source will change it state described in the event. By publishing an event the data source puts its current state to the event, so other data sources can use that information to change their state accordingly. The only problem with this system, that events can be reflected from the hub or from the other data sources, and that can put the system into an infinite oscillation (by async or infinite loop by sync). For example A -- data source B -- data source H -- hub A -> H -> A -- reflection from the hub A -> H -> B -> H -> A -- reflection from another data source By sync it is relatively easy to solve this issue. You can compare the current state with the event, and if they are equal, you don't change the state and raise the same event again. By async I could not find a solution yet. The state comparison does not work by async event handling because there is eventual consistency, and new events can be published in an inconsistent state causing the same oscillation. For example: A(*->x) -> H -> B(y->x) -- can go parallel with B(*->y) -> H -> A(x->y) -- so first A changes to x state while B changes to y state -- then B changes to x state while A changes to y state -- and so on for eternity... What do you think is there an algorithm to solve this problem? If there is a solution, is it possible to extend it to prevent oscillation caused by multiple hubs, multiple different events, etc... ? update: I don't think I can make this work without a lot of effort. I think this problem is just the same as we have by syncing multiple databases in a distributed system. So I think what I really need is constraints if I want to prevent this problem in an automatic way. What constraints do you suggest?

  Read the article

• Capture a Query Executed By An Application Or User Against a SQL Server Database in Less Than a Minute

  - by Compudicted

  At times a Database Administrator, or even a developer is required to wear a spy’s hat. This necessity oftentimes is dictated by a need to take a glimpse into a black-box application for reasons varying from a performance issue to an unauthorized access to data or resources, or as in my most recent case, a closed source custom application that was abandoned by a deserted contractor without source code. It may not be news or unknown to most IT people that SQL Server has always provided means of back-door access to everything connecting to its database. This indispensible tool is SQL Server Profiler. This “gem” is always quietly sitting in the Start – Programs – SQL Server <product version> – Performance Tools folder (yes, it is for performance analysis mostly, but not limited to) ready to help you! So, to the action, let’s start it up. Once ready click on the File – New Trace button, or using Ctrl-N with your keyboard. The standard connection dialog you have seen in SSMS comes up where you connect the standard way: One side note here, you will be able to connect only if your account belongs to the sysadmin or alter trace fixed server role. Upon a successful connection you must be able to see this initial dialog: At this stage I will give a hint: you will have a wide variety of predefined templates: But to shorten your time to results you would need to opt for using the TSQL_Grouped template. Now you need to set it up. In some cases, you will know the principal’s login name (account) that needs to be monitored in advance, and in some (like in mine), you will not. But it is VERY helpful to monitor just a particular account to minimize the amount of results returned. So if you know it you can already go to the Event Section tab, then click the Column Filters button which would bring a dialog below where you key in the account being monitored without any mask (or whildcard):  If you do not know the principal name then you will need to poke around and look around for things like a config file where (typically!) the connection string is fully exposed. That was the case in my situation, an application had an app.config (XML) file with the connection string in it not encrypted: This made my endeavor very easy. So after I entered the account to monitor I clicked on Run button and also started my black-box application. Voilà, in a under a minute of time I had the SQL statement captured:

  Read the article

< Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >