Search Results

Search found 26810 results on 1073 pages for 'fixed point'.

Page 831/1073 | < Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >

• Imported Hyper-V VM hangs

  - by BParker

  I have a pair of Hyper-V servers (Server 2008 R2 + Hyper-V role). I have duplicated one VM (exported from the first Hyper-V server to the Second) which seems to keep hanging. The VM is running XP SP3, and has the Virtual Additions installed. The first version runs fine, cpu normally around 0%-2% when idle and responds happily. The second version runs very poorly, and keeps running at an idle of around 8% cpu. I have checked the VM with Process Explorer, and the Idle process is (as expected) taking nearly all the cpu time, but what it's not using doesn't seem to show up in any other process. For example at one point idle dipped to 73%, but i could only account for anoth 4.5% in other processes. After some time (around 1-2 days) the VM seems to become so unresponsive, the only way to resurect it is to power-off the VM and reboot (shutdown via the Hyper- V console of via the VM seems to be impossible). Does anyone have any suggestions on how to trace the source of the problem? Thanks

  Read the article

• running a laptop continuously

  - by intuited

  I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

  Read the article

• RTL8188CE doesn't connect to any wifi access points

  - by Drakmail

  I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

  Read the article

• Getting PAM/user info into php - something like Net_Finger instead of a db?

  - by digitaltoast

  I've got a very small user group who just need to login, upload, check and then move specific files to a different area when ready. Right now, I use the nginx PAM auth module to log them in against their unix accounts. As their login is their home directory, I've already got the info to send the uploads to the right area - one line of php and no database needed. But I'm maintaining a separate DB just so PHP can welcome them, grab their email and send them an email when processed. Yes, sure I could use nosql or sqlite instead so as to not need a whole mysql install. But it occurred to me that as I've got all these blank user fields for phone numbers I could populate with any data, that I could use something like php's Net_Finger. Which failed for me with: sudo pear install Net_Finger Starting to download Net_Finger-1.0.1.tgz (1,618 bytes) ....done: 1,618 bytes could not extract the package.xml file from "/build/buildd/php5-5.5.9+dfsg/pear-build-download/Net_Finger-1.0.1.tgz" Download of "pear/Net_Finger" succeeded, but it is not a valid package archive Error: cannot download "pear/Net_Finger" At which point I thought I'd stop, and take a ServerFault reality check - is this a really bad/dangerous/stupid idea just to stop me having to maintain details in two places rather than one? It there a better way? Googling shows that it's not an oft-asked thing, so perhaps with good reason?

  Read the article

• How to connect android client to the localhost of Apache server (php) inside my laptop?

  - by user1796310

  I'm trying to create android apps which able sending data through wifi connection to my laptop Apache Server and MySQL database. I use the samsung galaxy tab 10.1 as my mobile device. and the protocol i used is HttpGet or HttpPost. And i use XAMPP( with Apache& SQL) to do the server and process the php. But, due to android cannot detect adhoc network from laptop, i use Virtual Router ( for window 7) to create virtual access point and make the tablet able connect to my laptop. But the problem is: [1] in my apps (client-android), where the httpget or httppost to which url? localhost in my laptop- 127.0.0.1 or localhost in android 10.0.0.1? or the ip address of the virtual router? [2]so, if i want access from android to the localhost(laptop-Apache) to call the php to run? which port? which ip address /url that i need to put in android apps(httpget)? and do i need to modify anything in httpconfig for XAMPP? thanks alot.

  Read the article

• Outbound ports to allow through firewall

  - by dunxd

  This question was asked before, but in a rather general way. I'm asking more specifically based on my current requirements. We have a number of remote offices made up of a bunch of PCs and an ASA 5505 which is used as firewall and VPN termination point. In the offices we share the internet connection with one or more other organisations over whom we have very little control, asides from the config on the ASAs. For a bunch of reasons I'd like to lock down these ASA 5505s to only allow outbound traffic to ports used by applications we know we need. I'm putting a standard config to roll out to all the ASAs, and if we need to open up ports for the other orgs we can do it on request. But I want to leave open the most commonly required ports so we can get up and running without waiting on other folks technical staff to get back. I plan to allow the following TCP ports to support commonly required resources: POP3 (110 and 995) HTTP (80 and 443) IMAP4 (143 and 993) SMTP (25 and and 465) The question really is, what other ports do I need to leave open to allow for "normal" working. I've seen UDP port 53 for DNS as one. Are there any others that would be worth opening up? Just to note - I'll also be setting up monitoring systems to keep an eye on the ports we do allow. Any of the above could be misused of course. We'll also back all this up with signed agreements. But I'm aiming for a technical solutions where I don't have to start out with the full requirements of everyone we share connections with. See also: outbound ports that are always open

  Read the article

• Exchange 2003 inbound routing issue

  - by user565712

  Just recently we started experiencing inbound routing issues. Email adddressed to [email protected] is intermittantly translated to [email protected]. This is happening for several users and, as stated, is intermittant. I don't know where to start looking for the solution. Is this an Exchange issue? A DNS issue? We have a single Exchange server inside our network with an FQDN of server.domain.local with a single SMTP Virtual Server. The Advanced properties of the Delivery tab of the Virt Server has an empty Masquerade Domain textbox and the value for the FDQN text-box is set to the domain itself, domain.com. The DNS record for domain.com is a CNAME entry referencing www.domain.com. Is this somehow related to the problem? I checked the headers of the inbound messages that generated NDRs as a result of being sent to [email protected] and nowhere in the header is www.domain.com mentioned. To make my life even more difficult, we use Postini as a third-party SPAM filtering service. Our MX records point to the Postini servers and Postini delivers the messages to our server. Perhaps it is Postini that is mucking things up? sigh I'm having trouble with this one and the intermittent aspect is making it that much more difficult for me. Any ideas?

  Read the article

• How to fix a damaged/corrupted NTFS filesystem/partition without losing the data on it?

  - by Gareth

  I was going to install Fedora 15 along side my Windows 7 Starter on my Acer Apire One D255E and at some point during the resizing of the NTFS partition (the one with Windows on it) the setup failed. Now I cannot access this partition from any OS. When I tried to access it from a Fedora install running on a USB flashdrive I get this error: Error mounting: mount exited with exit code 12: Failed to read last sector (452534271): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? It doesn't make a lot of sense to me but I was really hoping it would to someone and they can give me a way to restore the partition without losing everything on it (I have a lot of important notes from various classes on there)? Cheers.

  Read the article

• Windows 7 black screen after boot animation

  - by t_virus

  This is happening with my windows 7 64-bit install frequently. Today i was trying to install an icon pack. There was already a restore point prior to it so i didn't feel like create one. I replaced the following system files in both system32 and sysWOW64 imageres.dll imagesp1.dll zipfldr.dll and shell32.dll After a reboot i see windows boot animation and then a black screen (with no mouse) I let it like that for 10 minutes and the laptop automatically went to sleep mode. I wake it up and see an error box this error "interactive logon failed to initialize" I close it and i'm left with a black screen again, this time with a mouse though. I tried using automatic system repair. It just tells me to remove any extra hardware (i have none attached atm) System restore finishes successfully but doesn't fix the problem. Safe mode doesn't work either. same black screen after boot animation Can someone help me with this? Also, I'll be grateful anyone can upload those default files (listed above) for both system32 and sysWOW64 from a windows 7 64bit install (no service pack)

  Read the article

• Windows 7 Laptop Randomly Sleeping

  - by Josh Arenberg

  I'm running Windows 7 64-bit on a Lenovo laptop, and I have a problem wherein after I've put it to 'sleep' once, it will seemingly without any reason or warning go back to sleep every 10 to 15 minutes after that. Each time it wakes back up just fine, and you can happily continue on. However, 10 or 15 minutes later, it just drops out into sleep mode. I don't see any errors in the system logs. I don't think it's related to heat ( since it's not rebooting ). When I check the system event log, I can see where the machine goes to sleep, but it simply says "reason: application API", and doesn't indicate which app ( brilliant ). I don't see any errors from hardware or anything relating to sleep in the application log that would point to what is going on either. How can I find out which app is triggering this? EDIT: I confirmed that temperature wasn't the issue. I think it's important to keep in mind that this condition only happens after the first sleep. If I reboot, the problem goes away until I put it to sleep, after which it sleeps on it's own every few minutes. Is there no way to capture which app is calling the sleep routine?

  Read the article

• Strange Domain name under the same IP Address

  - by Mike Chip

  There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

  Read the article

• Can I select which folders the Photos live tile chooses from?

  - by nhinkle

  The built-in Photos app in Windows 8 has a live tile on the start screen that shows photos from your pictures library. It's a cool little visual, even if it's not particularly useful. The problem is that a lot of image files on my computer are not really photos per se -- I have a lot of screenshots, PNGs of technical drawings, graph images, etc. Those all look pretty awkward on the start screen. I look pretty awkward on the start screen too... sometimes photos like resume profile shots show up that I don't want to delete, but they're not really what I want to be staring at when I start my computer up. I'm looking for some way to configure which folders the Photos app should look in for images to display on the live tile. That way, I could point it to some directories of pretty scenic pictures I've taken, and not have to see graphs and my own mug. For the time being, I've just disabled the live tile (right click - disable live tile), but I would ultimately like to have this functionality, just with more control over it.

  Read the article

• Logging communication between two VMs

  - by sYnfo

  Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

  Read the article

• Walk me through the Linux log files (please)

  - by Andy

  Hey all, I just tried loading a 2MB file in gedit and it silently died on me. I was wondering if anything might appear in a log file that might help me diagnose this: I checked syslog and found out it segfaulted. While doing this I realised that I don't really know anything about how logging is organised on *nix machines. All I know at the mo is Logs are typically stored in /var/log/... is there anywhere else that I should know about? I'm familiar with application specific logs, such as apache's. I understand that dmesg is the bootup log, and syslog is a general system log... is that right? So would someone mind taking me through the most useful logs? Are the two logs I mention in the final point the only general logs? And what are the funky numbers at the start of lines in dmesg? Seconds since startup? Please include anything in your answers that you think would improve my understanding here and help me track down anomalies! TIA Andy

  Read the article

• How do I get to the bottom of network latency and bandwidth issues

  - by three_cups_of_java

  I recently moved two blocks south. That move moved me from Comcast to Broadstripe (high-speed internet cable providers). Comcast was pretty good. Broadstripe sucks. I called them on the phone, and they basically brushed me off (politely). I want to come to them with some numbers, so I can say more than just "it's really slow". I still have access to my old Comcast service, so I can run the tests using both providers. Here's what I'm seeing with my new Broadstripe service: 1) When I browse to most sites, there is a long delay (5-10 seconds) before the page starts loading in my browser 2) The speed test tell me I have 12 megs down (bullshit) 3) I have a server at my office. I just downloaded some files (using scp on the command line). It said I'm getting 3.5 KB/s I'm an experienced programmer and spend most of my days on the command line and in vim. Networking, however is not a strong point. I've played around with traceroute, but I'm not sure if that's the right tool to use. I have access to servers all over the country (I would just use Amazon EC2 to set up a test server), and I prefer to use Ubuntu for my testing. How can I come up with some hard numbers to show Broadstripe how crappy their service is?

  Read the article

• How do I setup routing for two companies with different Internet connections on the same LAN?

  - by Clint Miller

  Here's the setup: Two companies (A & B) share office space and a LAN. A 2nd ISP is brought in and company A wants its own Internet connection (ISP A) and company B wants its own Internet connection (ISP B). VLANs are deployed internally to separate the two companies' networks (company A: VLAN 1, company B: VLAN 2, shared VOIP: VLAN 3). With separate VLANs it's simple enough to use separate DHCP servers (or separate scopes on the same server) to assign the default gateway to each company's gateway for their Internet connection. Static routes can be created on each gateway to point traffic destined for the other company's VLAN or the voice VLAN so that all nodes are reachable as expected. However, I think this is a form of asymmetrical routing, right? (The path from node A1 to node B1 is not the same as the path back from node B1 to node A1). Can I set up policy-based routing to correct this? In that case, can I assign the same default gateway to every device on all VLANs and create a routing policy on a L3 switch to look at the source address and forward traffic to the appropriate next hop? In that case, I want the routing logic to go like this: If the destination address is known, forward the traffic (traffic destined for a different VLAN). If the destination address is unknown, forward the traffic to ISP A's gateway if the source address is on VLAN A; or forward the traffic to ISP B's gateway if the source address is VLAN B. Am I thinking about this problem in the correct way? Is there another way to solve this problem that I am overlooking?

  Read the article

• Windows 7 pc freezes for an indeterminate amount of time after unlocking

  - by pikes

  Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

  Read the article

• locale: What is the LANGUAGE variable used for? (and when?)

  - by seya

  I am trying to understand the locales used in Linux. On my Ubuntu 11.10 system locale puts out the following: LANG=en_DK.UTF-8 LANGUAGE=en_GB:en LC_CTYPE=en_GB.UTF-8 LC_NUMERIC="en_DK.UTF-8" LC_TIME="en_DK.UTF-8" LC_COLLATE=en_GB.UTF-8 LC_MONETARY="en_DK.UTF-8" LC_MESSAGES=en_GB.UTF-8 LC_PAPER="en_DK.UTF-8" LC_NAME="en_DK.UTF-8" LC_ADDRESS="en_DK.UTF-8" LC_TELEPHONE="en_DK.UTF-8" LC_MEASUREMENT="en_DK.UTF-8" LC_IDENTIFICATION="en_DK.UTF-8" LC_ALL= (en_dk is for using international day format, continental European number formatting (1.234,56) etc.) I think I understand what the LC_* family does, that LANG is the fallback if one of them is not set and that LC_ALL sets all of the LC_* variables to its value. What I don't know yet, is what LANGUAGE is used for. The notation en_GB:en reminds me of the Accept-Language HTTP header. With the settings above it would mean, British English is used, if a translation for it exists. Otherwise any existing English translation (en_US, en_AU, ..., whatever) would be used. Am I right so far? Also what programs actually obey the LANGUAGE setting? In how far is it different from LC_MESSAGES? Unfortunately, man locale only documents the LC_* family. And searching the web for 'linux locale LANGUAGE' or similar is a mute point. (Of course language is a word often used when talking about locales, and it may also be shown just in the output of locale without being discussed). Does anybody of you can help me out there?

  Read the article

• My scanner isn't responding. It is connected to a SCSI interface using Windows XP

  - by Bob

  I have a Microtek ScanMaker 9600XL scanner. The best part about it is that it is 12x17 inches. Wowza! The worst part about it is that I've had it working at one point, with the same cable, same card, same computer, but have since re-installed Windows XP on it. Currently it will turn on, and blink the Power and Ready lights. They should be solid. I've done my best to find documentation for this, but all I've really gotten is the content on the Microtek site. I've tried turning the scanner on, then the PC. Turning the PC on, then the scanner. When I try launching the software it pops up a dialog saying "ScanWizard Pro can't find any scanners! Use SCSI Check to find a scanner." I know the scanner has a pair of little buttons on the back. These cycle up/down a counter. I think it goes 0-7. Any thoughts on what that does, or how to proceed troubleshooting? I think my next step is to try each of those numbers, and do both pc booted first, and scanner booted first for each of those numbers...

  Read the article

• How and where do you manage your domain names?

  - by Saif Bechan

  In the past several years doing web development I often times needed to buy new domain names. I changed registrars a lot also so over the years I have multiple domain names scattered over different registrars all over the world. Now I want to bring a little structure into my business, and I am at the point that I want to be able to have easy control over my domain names in a convenient way. Does anyone have an idea on what the best way is to give structure on this. I have made some suggestions maybe you can comment on them for me. 1) Just leave it as it is I can leave everything as it is. To make adjustments I have to log into different panels, and for some registrars I have to email the changes. 2) Transfer all the domains to one registar This will cost a lot, about 10 usd per domain name. But if I can find a registar where I have full control over DNS this is worth looking at. Can you give me some comments on how you are doing things now. Maybe also which registrar you prefer on doing things.

  Read the article

• How should an experienced Windows SysAdmin learn Linux? [closed]

  - by Systemspoet

  I have a new hire starting in a few weeks who is an experienced Windows SysAdmin. I think he's fairly senior on the Windows side, with a pretty deep AD understanding and experience with Exchange 2007, 2010, and exchange migrations. He's done a little PowerShell but I suspect more of the "run this command to do this" variety then "write a script to do this" sort. However, we are a mixed shop and (he knows this) I expect him to become a reasonably competent Linux SysAdmin over time. I'm looking for good starting points to bring him along. I have over ten years of Linux/UNIX experience, so it all sort of seems intuitive to me, but I've been thinking about the toolkit you actually need to be productive in the Linux CLI world. Just to be able to use the machines at all, off the top of my head... vi Basic CLI stuff -- move around, rename files, copy files, tar, gzip, changing passwords, finding relevant manpages, keep track of where you are, find things in your history, etc, etc. More advanced things that I take for granted but are actually pretty hard -- doing things with 'find', extracting relevant text via 'awk' and/or 'cut', knowing when to use 'grep' and when to use 'grep -e' or 'egrep'. Distribution specific stuff... compiling software, rpm, yum, apt-get, you name it. This all seems pretty basic to me, but when I think back to 1995 when I was first learning my way, some of those things took me years to master. So my question is -- where should I send him to pick up those skills? I'm not just thinking of classes, but rather also websites and books? Where do you all suggest as a starting point for picking up Linux skills?

  Read the article

• Setting up DNS using BIND

  - by dupdupdup

  i have troubles setting up my db files. Please kindly point me in the right direction! i need to define a nameserver that manage a domain example.org.au then i need it to have two records. one called server which is the ip address of current machine the other called www where www.example.org.au will be pointed to another ip address. i cant seem to get my system to work. This is my db.example.org.au file example.org.au. IN SOA server.example.org.au. ( 1; 3; 1h; 1w; 1h ) ; ; ;Host addresses localhost.example.org.au IN A 127.0.0.1 www.example.org.au. IN A 192.168.1.200 ; another virtual machine server.example.org.au IN A 192.168.1.199 ; current virtual machine If possible Please correct my errors! thanks! Any good guides out there? Thanks in advance ! :)

  Read the article

• Windows Broken after Deletion of HP_TOOLS partition

  - by beanland

  When I decided to install Ubuntu on my laptop as a dual-boot, I recognized that Windows 7 was using four separate partitions. I (yes, this was stupid) thought the HP_TOOLS partition was probably one I could get rid of, so I deleted it and installed Ubuntu side-by-side Windows using the installation wizard, but now Windows won't progress past the loading screen without the computer automatically restarting. I've had to use Ubuntu exclusively since then. I'm not sure how I can recover it. All of my files seem to still be there--I can mount the other partition and see them, use them, etc--but Windows 7 won't boot. I really have no idea what to do or what to try, or even if I'm at a salvageable point. here's a screenshot of GParted: This makes me suspicious that it wasn't necessarily the removal of my HP_TOOLS partition but the "unknown" status of that 992.50 KiB partition there, sda1. I'm assuming that's the recovery one? How can I get Windows bootable again? I'm sorry, but I'm so unfamiliar with this sort of thing I'm not quite sure where to start.

  Read the article

• What are the practical differences between an IP address and a server?

  - by JMC Creative

  My understanding of IPs and other DNS-type server-related issues really falls short (read: exteme noob). I know a dedicated server would increase speed. What, if any, difference in speed would a dedicated IP make? Am I correct in understanding the Best Practices from Yahoo that I could use the second IP to serve up some content, which would increase the number of parallel downloads for the user? Or are both IPs (purchase from same hosting account) going to point to the same server? Or how does it work? Are there other optimization things I should be aware of when thinking of purchasing a dedicated IP? Clarification I am talking about the speed of serving the webpages, i.e. the speed of my website. Yes, I know that IP and server are completely different, not even opposites, just different. But this, indeed, is my question! The Question Reformulated: Will having a second (dedicated) IP on my website speed up the time that it will load and display for the user? Or does that have nothing at all to do with IP, and is only a server issue? I'm sorry if this is still unclear. This is a real question though, I may just not be wording it well.

  Read the article

• What are secure ways of sharing a server (ssh+LAMP) with friends?

  - by Bran the Blessed

  What is the best way to share a virtual server with friends? More precisely, I have the following assets: A virtual private server (Debian Lenny) with root access for myself, running... SSH apache2 mysql Some unused disk space Some friends in need of hosting The problem I would now like to do the following: Hosting one or several domains per friend My friends should have full access to their domains, including running PHP scripts, for example My friends should not be able to poke around in other directories The security of my server should not be compromised by faulty PHP scripts To clarify: I do trust my friends in the sense that they are not trying to do something evil with their access. I just do not trust the programs they are going to run. So, what are your recommendations for establishing such a scenario? Partial solution I already came up with the following plan: Add chrooted SSH users for my friends Add Apache vhosts per user (point the directories to subdirectories of the homedirectories, i.e. /home/alice/example.com, /home/bob/example.net, etc. But how can I enforce a chroot-like environment for the scripts they are running within these vhosts? Any pointers would be appreciated.

  Read the article

< Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >