Search Results

Search found 68155 results on 2727 pages for 'data security'.

Page 836/2727 | < Previous Page | 832 833 834 835 836 837 838 839 840 841 842 843  | Next Page >

• HTTPS and HTTP issue on server with SSL

  - by Asghar

  I have a site www.example.com for which i purchased SSL cert and installed. And it was working fine, I also have a subdomain with app.example.com which was not on SSL. Both www.example.com and app.example.com are on same IP address. At later we decided to put SSL only on app.frostbox.com and then i configured SSL with app.frostbox.com and it worked fine, Now the issue is that Google is indexing my site as https://www.example.com/ and when users hits the web , Invalid security warning is issued and when user allow security issue they are shown my app.example.com contents. Note: I have my SSL configuration files in /etc/httpd/conf.d/ssl.conf The contents of the ssl.conf are below. NOTE: I tried solutions in .httaccess but none of those worked. Like redirecting 301 redirects etc http://pastebin.com/GCWhpQJq

  Read the article

• How full is too full for mechanical hard drives?

  - by Sunny Molini

  I have heard many claim that it doesn't matter how full a drive is until it starts cutting into temp and virtual memory space. This doesn't make sense to me, given the nature of how the data is transacted on a hard drive. The inside of the platter presents less data per revolution than the outside of the drive does, by significant factors. The inside 40% of the radius of full size hard drive is used for the spindle, so only the outside 60% is used for data storage, but that still means that the inside track of a hard drive presents data 60% slower than the outside track. By my calculation, a Hard drive that is only 10% full should perform about 2.25 times faster than a hard drive that is 90% full, assuming that the flow is constrained by other factors. Am I wildly off base here? For all the drives I know, even the top speeds of the first 1% of the drive would be well within the bandwidth provided by a SATA 2 connection.

  Read the article

• Creating an app shortcut in Windows 7 XP Mode

  - by MT_Head

  I have a VERY old legacy app that I've managed to move from machine to machine; the installer for it doesn't actually work under newer versions of Windows, but I was able to track down the registry changes and DLL registrations necessary to make it work. I'm able to create a desktop icon in my XP mode environment, and the program works... but I'd like to add an icon to the Windows 7 menu, and run the program in semi-native mode. For example, the icon for Microsoft Security Essentials in XP mode has the following target: %SystemRoot%\system32\rundll32.exe %SystemRoot%\system32\VMCPropertyHandler.dll,LaunchVMSal "Windows XP Mode" "||232f633" "Microsoft Security Essentials" Now, the only part of that that seems to be "magic" is "||232f633" - does anyone have any idea where that comes from, or how to identify the correct equivalent for an arbitrary program? I gather that, had the program been installed normally through a .msi file (or WISE, or NSIS, or what have you), this id would have been generated automagically... Thanks for any insights!

  Read the article

• Windows Server 2003 (as workstation) unable to write to Samba fileshares

  - by remyhorton

  Setup is a Samba fileserver under Linux, which i am trying to access from a Windows Server 2003 box which has been reconfigured as a workstation. I can log onto the fileshares and can copy/delete files, but trying to open a file then write to it fails. Renaming files also fails with an error about requiring a filename. Drag/dropping files onto Xemacs gives me a message about copying from the network zone, and once open the file is read-only. Any ideas of what is wrong? I suspect it is a miscommunication of security details, as folder security options are all unchecked (checking them has no effect). I know it is not a problem with Samba itself, as Window2000, WindowsXP, and Nautulas (under Linux) can all access/edit fileshare files fine using the same userid/password. I am not using domain logins.

  Read the article

• Taking stock of an existing ASA Firewall

  - by Nate

  Imagine you are given an existing network using an ASA firewall. The network works, but you aren't sure of anything else. The firewall may be completely improperly configured, with "outside" actually being inside and "inside" actually being outside, for all you know. My question is this: what are the commands to take stock of an existing ASA firewall setup? With only CLI access, how do I figure out: What interfaces are available The names of the interfaces The security levels attached to the interfaces The access-lists attached to the interfaces, including rules and directions I know how to set these things (interface, nameif, security-level, and access-list/access-group), but I don't know how to figure them out given an existing system. On a related note, is there anything else that I should worry about checking to make sure that the network isn't wide open? Thanks!

  Read the article

• file system that allow to specify different RAID level per directory and change it afterward

  - by Adam Ryczkowski

  I have 5 hard drives, where I want to keep my data. Some of my files are more important, and some of them are less. So some of them I wish to put on RAID-6, and for some it RAID-5 is sufficient. It is difficult to predict at the moment of creation of the arrays how much space of each type to declare. What I would do if I didn't hear about zfs, is partition the hard drives into identical 100GB partitions, and as my needs grow, assemble those partitions into md devices using linux-raid. Then, I'd combine those devices using lvm into logical volumes where I'd put my data. So when I'd need more space of e.g. RAID-6, I'd take 100GB partition from each hard drive and assemble them into another RAID-6 md device and would use it as physical storage for the logical volume group dedicated for RAID-6 data. Then I could grow the file system on this logical volume. On top of RAID-6 and RAID-5 Volume Groups (managed by lvm) would reside completely independent file systems, which I'd later merge with multiple mount --bind into a single directory structure that would reflect the logical structure of data rather that of the storage. But now, when I heard about the ZFS with all the performance, data-healing and compression capabilities I cannot stop thinking if it can help me. If so, what do you think would be the best setup?

  Read the article

• Upgrading .Net 2.0 to .Net 3.5

  - by tgandrews

  Will this require a reboot? Even if I include all the security patches as well.

  Read the article

• How to slave a 3.5" 500gb sata external hdd(Western Digital) to my dell Inspiron laptop

  - by AJ HDD

  i have a 3.5" western digital my book 500gb external hdd....i gave it to a friend of mine and he broke the usb port in it...i went to a nearby comp repair shop and had him solder the thing...it didnt detect when i plugged it in my dell inspiron laptop........i recently saw about the 3.5" sata to usb enclosure, so i went to check it....strangely when its placed in the enclosure, its not detecting in windows...also when it was put as secondary(im guessing slave) to the shop fellow's desktop it shows up in the bios and starting, but then again doesnt show in windows 7, and the guy told me i need to data recovery to get teh data back p.s.the wd hdd doesnt have os, just data, soo my question is: can i slave the drive to my dell laptop and try to recover the data....if so how? please i would really appreciate it...thanks in advance

  Read the article

• debian dependencies (libssl-dev and libncurses5)

  - by RubyFreak

  I'm trying to install under RVM the Ruby Enterpise (REE) under debian My debian is squeeze (uname -r) 2.6.18-194.26.1.el5.028stab070.14xen i did try to install ree but it complains that it is missing libssl-dev and libreadline5-dev. I did update my lenny to squeeze, but i didn't update the kernel, since its a production server. The operational system is already updated and upgraded sources.list: deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main I did try to install it using the following command: apt-get install libssl-dev libreadline5-dev But unfortunately i'm getting the following problems: The following packages have unmet dependencies: libreadline5-dev: Depends: libncurses5-dev but it is not going to be installed libssl-dev: Depends: libssl0.9.8 (= 0.9.8o-4squeeze1) but 0.9.8o-6 is to be installed E: Broken packages I was thinking to reinstall those packages and install again, but it has too many dependencies, and it is a production server, that i would like to know if there is any other way to fix it. Or at least to double check if it is necessary to reinstall both :-/

  Read the article

• Where should my application setup put the binary executables in Windows 7?

  - by KeyboardMonkey

  I created a small Windows app, and am builder a setup for it using NSIS, but what I can't find out is where to put the executables to conform to the new Windows security model. Traditionally we put program files in, well, "c:\program files". With the security model getting more mangled with each Windows version, some users have restricted accounts, and I'm not sure installing into program files will work for these users. Where can I install my program's files that will cater for these lower-privileged users? Oh and I want to avoid ClickOnce.

  Read the article

• How to run programs from a different directory in unix

  - by user1067358

  I know this is a very simple question, and that many similar (but more complicated!) questions have been asked- So i wanted to ask this in a very plane manner. Sorry if this voids the rules of conduct on this website! I'm very new to using unix. I have a program that converts a ".evt" file to an .rq1, which is used for data analysis. The command to do so is simple, for example: Convert data.evt (this outputs data.rq1). This program, let's say, is located in directory /A and I have a data file that I want to convert in directory /B. How would I go about executing this program without moving the convert program to directory B?

  Read the article

• What happens to missed writes after a zpool clear?

  - by Kevin

  I am trying to understand ZFS' behaviour under a specific condition, but the documentation is not very explicit about this so I'm left guessing. Suppose we have a zpool with redundancy. Take the following sequence of events: A problem arises in the connection between device D and the server. This causes a large number of failures and ZFS therefore faults the device, putting the pool in degraded state. While the pool is in degraded state, the pool is mutated (data is written and/or changed.) The connectivity issue is physically repaired such that device D is reliable again. Knowing that most data on D is valid, and not wanting to stress the pool with a resilver needlessly, the admin instead runs zpool clear pool D. This is indicated by Oracle's documentation as the appropriate action where the fault was due to a transient problem that has been corrected. I've read that zpool clear only clears the error counter, and restores the device to online status. However, this is a bit troubling, because if that's all it does, it will leave the pool in an inconsistent state! This is because mutations in step 2 will not have been successfully written to D. Instead, D will reflect the state of the pool prior to the connectivity failure. This is of course not the normative state for a zpool and could lead to hard data loss upon failure of another device - however, the pool status will not reflect this issue! I would at least assume based on ZFS' robust integrity mechanisms that an attempt to read the mutated data from D would catch the mistakes and repair them. However, this raises two problems: Reads are not guaranteed to hit all mutations unless a scrub is done; and Once ZFS does hit the mutated data, it (I'm guessing) might fault the drive again because it would appear to ZFS to be corrupting data, since it doesn't remember the previous write failures. Theoretically, ZFS could circumvent this problem by keeping track of mutations that occur during a degraded state, and writing them back to D when it's cleared. For some reason I suspect that's not what happens, though. I'm hoping someone with intimate knowledge of ZFS can shed some light on this aspect.

  Read the article

• Mcafee Auto-update from UNC path problem

  - by Vicky

  I have a network with 50 computers with no internet access. So instead of updating in each of them using dat file individually I tried to create a shared folder in server, and created a UNC in site repository. I downloaded the file DAT Package For Use with Mcafee AutoUpdate Architect & ePO 3.0 from http://www.mcafee.com/apps/downloads/security-updates/security-updates.aspx. When I try to update it is giving an error Error occurred while downloading file SiteStat.xml. So how fix it?

  Read the article

• Which application may I use to open an old Microsoft access database?

  - by skyeagle

  I have an old Microsoft access database (circa 2002 or so), which I need to extract data from. I don't have Microsoft Office available - the trial version I downloaded expired a week ago or so. I am looking for an open source solution or something similar that will allow me to open the database and extract the data - so I can throw away the database. BTW, can I use OpenOffice to access the data in the .mdb file? (I don't think the option is available IIRC)

  Read the article

• Windows 7 migration: How to move application settings?

  - by FrustratedWithFormsDesigner

  Migrating from WindowsXP Home to Windows 7 Pro. The last bit that I'm stuck on is migrating application settings, such as the settings for Opera, Firefox, MSN Messenger, and others. On the XP system, this all seems to be in "user/Local Settings" and "user/Application Data". On the Windos 7 system, there is a "user/AppData" folder as well as "user/Application Data" and "user/Local Settings". When I try to access "Application Data" and "Local Settings" on Windows 7, I get an "Access Denied" error (even though my user is an admin). So... if I can't copy my application settings files to "Application Data" and "Local Settings" on Windows 7, where to I copy them to?

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

• Redirecting or routing all traffic to OpenVPN on a Mac OS X client

  - by sdr56p

  I have configured an OpenVPN (2.2.1) server on an Ubuntu virtual machine in the Amazon elastic compute cloud. The server is up and running. I have installed OpenVPN (2.2.1) on a Mac OS X (10.8.2) client and I am using the openvpn2 binary to connect (in opposition to other clients like Tunnelblick or Viscosity). I can connect with the client and successfully ping or ssh the server through the tunnel. However, I can't redirect all internet traffic through the VPN even if I use the push "redirect-gateway def1 bypass-dhcp" option in the server.conf configurations. When I connect to the server with these configurations, I get a successful connection, but then an infinite series of error messages: "write UDPv4: No route to host (code=65)". Traffic routing seems to be compromised because I am not able to access anything anymore, not even the OpenVPN server (by pinging 10.8.0.1 for instance). This is beyond me. I am finding little help on the web and don't know what to try next. I don't think it is a problem of forwarding the traffic on the server since, first, I have also took care of that and, second, I can't even ping the VPN server locally through the tunnel (or ping anything at all for that matter). Thank you for your help. Here is the server.conf. file: port 1194 proto udp dev tun ca ca.crt cert ec2-server.crt key ec2-server.key # This file should be kept secret dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 And the client.conf file: client dev tun proto udp remote servername.com 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert Toto5.crt key Toto5.key ns-cert-type server comp-lzo verb 3 Here is the connection log with the error messages: $ sudo openvpn2 --config client.conf Wed Mar 13 22:58:22 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:22 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:22 2013 LZO compression initialized Wed Mar 13 22:58:22 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:22 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:22 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:22 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:22 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:22 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:22 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:22 2013 TLS: Initial packet from 54.234.43.171:1194, sid=ffbaf343 d0c1a266 Wed Mar 13 22:58:22 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:22 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:22 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:23 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:58:25 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:58:25 2013 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:58:25 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:58:25 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:58:25 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:58:25 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:25 2013 Initialization Sequence Completed ^CWed Mar 13 22:58:30 2013 event_wait : Interrupted system call (code=4) Wed Mar 13 22:58:30 2013 TCP/UDP: Closing socket Wed Mar 13 22:58:30 2013 /sbin/route delete -net 10.8.0.0 10.8.0.5 255.255.255.0 delete net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:30 2013 Closing TUN/TAP interface Wed Mar 13 22:58:30 2013 SIGINT[hard,] received, process exiting toto5:ttntec2 Dominic$ sudo openvpn2 --config client.conf --remote ec2-54-234-43-171.compute-1.amazonaws.com Wed Mar 13 22:58:57 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:57 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:57 2013 LZO compression initialized Wed Mar 13 22:58:57 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:57 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:57 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:57 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:57 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:57 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:57 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:57 2013 TLS: Initial packet from 54.234.43.171:1194, sid=a0d75468 ec26de14 Wed Mar 13 22:58:58 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:58 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:58 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:59:00 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:59:00 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:59:00 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:59:00 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:59:00 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:59:00 2013 /sbin/route add -net 54.234.43.171 0.0.0.0 255.255.255.255 add net 54.234.43.171: gateway 0.0.0.0 Wed Mar 13 22:59:00 2013 /sbin/route add -net 0.0.0.0 10.8.0.5 128.0.0.0 add net 0.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 128.0.0.0 10.8.0.5 128.0.0.0 add net 128.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 Initialization Sequence Completed Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) ... The routing table after a connection WITHOUT the push redirect-gateway (all traffic is not redirected to the VPN and everything is working fine, I can ping or ssh the OpenVPN server and access all other Internet resources through my default gateway): Destination Gateway Flags Refs Use Netif Expire default user148-1.wireless UGSc 50 0 en1 10.8/24 10.8.0.5 UGSc 2 7 tun0 10.8.0.5 10.8.0.6 UH 3 2 tun0 127 localhost UCS 0 0 lo0 localhost localhost UH 6 6692 lo0 client.openvpn.net client.openvpn.net UH 3 18 lo0 142.1.148/22 link#5 UCS 2 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 50 0 en1 76 user150-173.wirele localhost UHS 0 0 lo0 142.1.151.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSWi 0 0 en1 71 The routing table after a connection with the push redirect-gateway option enable as in the server.conf file above (all internet traffic should be redirected to the VPN tunnel, but nothing is working, I can't access any Internet ressources at all): Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 1 0 tun0 default user148-1.wireless UGSc 7 0 en1 10.8/24 10.8.0.5 UGSc 0 0 tun0 10.8.0.5 10.8.0.6 UHr 6 0 tun0 54.234.43.171/32 0.0.0.0 UGSc 1 0 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 3 6698 lo0 client.openvpn.net client.openvpn.net UH 0 27 lo0 128.0/1 10.8.0.5 UGSc 2 0 tun0 142.1.148/22 link#5 UCS 1 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 1 0 en1 833 user150-173.wirele localhost UHS 0 0 lo0 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSW 0 0 en1

  Read the article

• Force ID of user created by apt-get

  - by Bart van Heukelom

  Context: I'm automatically installing postgresql-9.1 on an Ubuntu server with apt-get. This creates the required postgres user. The Postgres data is on an external volume that survives reinstalls. This data is obviously owned by the postgres user. The problem I'm having is that the ownership is not recorded under the name postgres, but under the UID that postgres had at creation time. When the server is reinstalled, postgres sometimes gets a different UID, and no longer owns the data directory, and thus does not work. Question: Can I force the UID of the user postgres created by apt-get to something fixed? Or is there another way to solve my problem? (As you may have deduced, this is on Amazon EC2 with the data on an EBS volume)

  Read the article

• Private VOIP network

  - by SuppositoryPlacebo

  I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

  Read the article

• What directories I must backup for reinstalling Windows 7?

  - by gsc-frank

  I'm reinstalling a Windows 7 PC and want backup all the system, application and users data to latter decide what data can be useful. What directories I must backup? I will format the PC and all importante data must be saved. I have doubts particularly about C:\Users\USER_NAME\AppData and how save it using a Ubuntu live CD in case I don't have access to the Windows 7 PC. AppData have a lot of syslink inside!

  Read the article

• How can I run my program on a large number of computers? [closed]

  - by zenpoy

  I'm looking for a (preferably free) service for running an executable I wrote? It's not malicious, it's not a virus, it's not scam, and if this is really important I can upload the python source code instead. I wrote a small crawler to gather information regarding the style of web pages for my MA project, and I need a lot more data. EDIT Here is more information on my problem and how I approach on solving it, and where I'm stuck. As part of my research I'm trying to classify text based on it's style (font-family for now), my data is based web pages, so I wrote a client/server application - the client is a crawler that gathers this data and send it to the server. The problem is that like 99% of the internet is Arial, Verdana and Helvetica - other fonts are far more rare, so I need to spend very long time to gather enough data regarding these fonts. Hope this explains it.

  Read the article

• List existing file server permission groups/users

  - by Patrick

  So we have taken over a new client and their existing file server is frankly a mess. We have migrated their old file server from a 2k box to a 2k8 DFS cluster and now I'm looking at rebuilding both the folder structure and their permissions. Unfortunately its been half done with AD groups (poorly named/no description/notes) and half with individuals named in security on the folders themselves. What I'm looking to do is to dump a complete list of all the folders with their security permissions (ideally I'd like to ignore files but not essential). CACLS got me half way there but fails with an odd error message and its output isn't particularly user friendly and I'm working with roughly 2Tb/250,000 files here so I really need something that gives me a bit more functionality. Question : does anyone have any experience of something similar/know of a bit of software that might help me out?

  Read the article

• disk write cache buffer and separate power supply

  - by HugoRune

  Windows has a setting to turn off the write-cache buffer (see image) Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. Is it feasible and economical to get such a "separate power supply" for the internal sata drives of a non-server PC? Under what name is such a power supply sold? I know that there are UPS devices that can be connected to external drives,but what is required to be able to switch this setting safely on for an internal disk? The setting has different descriptions in different version of windows Windows XP: Enable write caching on the disk This setting enables write caching in Windows to improve disk performance, but a power outage or equipment failure might result in data loss or corruption. Windows Server 2003: Enable write caching on the disk Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows Vista: Enable advanced performance Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows 7 and 8: Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. This article by Raymond Chen has some more detailed information about what the setting does.

  Read the article

• AWS VPC - why have a private subnet at all?

  - by jkim

  In Amazon VPC, the VPC creation wizard allows one to create a single "public subnet" or have the wizard create a "public subnet" and a "private subnet". Initially, the public and private subnet option seemed good for security reasons, allowing webservers to be put in the public subnet and database servers to go in the private subnet. But I've since learned that EC2 instances in the public subnet are not reachable from the Internet unless you associate an Amazon ElasticIP with the EC2 instance. So it seems with just a single public subnet configuration, one could just opt to not associate an ElasticIP with the database servers and end up with the same sort of security. Can anyone explain the advantages of a public + private subnet configuration? Are the advantages of this config more to do with auto-scaling, or is it actually less secure to have a single public subnet?

  Read the article

• Problem running application on windows server 2008 instance using amazon ec2 service and WAMP

  - by Siddharth

  I have a basic (small type) windows server 2008 instance running on amazon ec2. I've installed WAMP server on to it, and have also loaded my application. I did this using Remote desktop Connection from my windows machine. I'm able to run my application locally on the instance, however when I try to access it using the public DNS given to it by amazon, from my browser, I'm unable to do so. My instance has a security group that is configured to allow HTTP, HTTPS, RDP, SSH and SMTP requests on different ports. In fact I have the exact same security group as the one used in this blog, http://howto.opml.org/dave/ec2/ I did almost everything same as the blog, except for using a different Amazon Machine Image. This is my first time using amazon ec2, and i can't figure out what I'm doing wrong here

  Read the article

< Previous Page | 832 833 834 835 836 837 838 839 840 841 842 843  | Next Page >