Search Results

Search found 4205 results on 169 pages for 'intel rst'.

Page 84/169 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • What is the best bang for buck desktop CPU

    - by dev5
    What is the best bang for buck desktop cpu available at the moment. AMD or Intel are both OK. Although slight bias to AMD since i prefer their motherboards. It's for an all round machine, i do a bit of everything, from gaming to web development.

    Read the article

  • Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

    - by BraeburnDev
    I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

    Read the article

  • xp black screen

    - by ciss
    Hello, sorry for my english, i am from russia. so, my pc based on AMD athlon. In past i move harddrive with xp and insert this HardDrive to another PC (Intel core2duo) I do this because i need a lot of files from my pc to another. So after this i back my harddrive to original pc (amd) And i see blackscreen on win-loading! (additional info - i boot this hard on another pc ... i know this is bad =(

    Read the article

  • HTTP Content-type header for cached files

    - by Brian
    Hello, Using Apache with mod_rewrite, when I load a .css or .js file and view the HTTP headers, the Content-type is only set correctly the first time I load it - subsequent refreshes are missing Content-type altogether and it's creating some problems for me. Specifically, gzip is not compressing these files. I can get around this by appending a random query string value to the end of each filename, eg. http://www.site.com/script.js?12345 However, I don't want to have to do that, since caching is good and all I want is for the Content-type to be present. I've tried using a RewriteRule to force the type but still didn't solve the problem. Any ideas? Thanks, Brian More Details: HTTP headers WITHOUT random query string value: http://localhost/script.js GET /script.js HTTP/1.1 Host: localhost User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: */* Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://localhost/ Cookie: PHPSESSID=ke3p35v5qbus24che765p9jni5; If-Modified-Since: Thu, 29 Apr 2010 15:49:56 GMT If-None-Match: "3440e9-119ed-485621404f100" Cache-Control: max-age=0 HTTP/1.1 304 Not Modified Date: Thu, 29 Apr 2010 20:19:44 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Connection: Keep-Alive Keep-Alive: timeout=5, max=100 Etag: "3440e9-119ed-485621404f100" Vary: Accept-Encoding X-Pad: avoid browser bug HTTP headers WITH random query string value: http://localhost/script.js?c947344de8278053f6edbb4365550b25 GET /script.js?c947344de8278053f6edbb4365550b25 HTTP/1.1 Host: localhost User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: */* Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://localhost/ Cookie: PHPSESSID=ke3p35v5qbus24che765p9jni5; HTTP/1.1 200 OK Date: Thu, 29 Apr 2010 20:14:40 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Last-Modified: Thu, 29 Apr 2010 15:49:56 GMT Etag: "3440e9-119ed-485621404f100" Accept-Ranges: bytes Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 24605 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: application/javascript

    Read the article

  • my.cnf for big wordpress installation

    - by adnan
    My website using wordpress with more than 150K posts & using auto posts publish feature with more than 2K daily posts I need to configure my.cnf settings to speed up my website actually the website speed is good but i have a problem with facebook sharing when I trying to share some link in facebook the link appears as this image http://elnhrda.com/facelink.jpg So I need to speed up my website by configure my.cnf I have VPS 4G.B RAM 300 HDD CENTOS6 x86_64 processor Intel Dual Xeon L5420 (8 x 2.5 GHz) this is my current my.cnf [mysqld] query_cache_size=512M skip-name-resolve innodb_file_per_table=1 query_cache_limit=32M any suggestions may be help

    Read the article

  • Get sublime text 2 (sublimecodeintel) to parse mason

    - by user813182
    So Sublime Text 2 seems to getting a lot of love lately. I am using the Sublime Code intel plugin, https://github.com/Kronuz/SublimeCodeIntel for auto completion. The problem is, it does not recognize .mi files as MASON files. I looked into the lexer and it does have the keywords in place. How do I force it to be parsed as MASON? Running "Set Syntax: " on ctrl+shift+p, does not show a MASON option.

    Read the article

  • How to stop switchable graphics from switching to high-power GPU when charging the laptop?

    - by Saifallah
    I've an Acer laptop with Windows 7 64 bit and an ATI Radeon HD 6550M Graphics card. Whenever I connect the power to charge the battery it automatically switches to the high-power GPU (ATI) instead of the low-power (Intel) GPU. There's an option in the bios to stop such thing but it makes the GPU runs always on high-power and I can't switch to the low-power GPU. How can I prevent the switchable graphics from automatically using the high-power GPU when charging?

    Read the article

  • PC monitors shut off and system hangs while playing 3D games, but sound continues - Diagnosis?

    - by Jon Schneider
    Two days ago, I started running into a problem with my Windows PC: The PC's two connected monitors simultaneously lose signal and go black (as though the PC had been powered off). The keyboard's Numlock, Capslock, and Scroll Lights will become "stuck" in their current positions, as though the PC is hung. (For example, the Numlock light on the keyboard remains lit regardless of me pressing the Numlock key repeatedly.) No keyboard input does anything. (Ctrl+Alt+Del, Ctrl+Shift+Esc, Ctrl+C, etc.) However -- Whatever sound/music the PC was playing continues to play, and the PC's fans continue running, so the PC hasn't powered itself off or rebooted itself. Opening up the case, the graphics card is pretty hot to the touch. I had this happen 3 times in one evening. In all cases, I was playing a game with 3D graphics when the problem occurred (Torchlight, Minecraft, Magic: The Gathering 2012, Avadon: The Black Fortress demo). I have yet to have the problem happen when I'm not playing a game. This system has been running stable for about 2.5 years prior to this. I didn't make any changes to the system prior to the problem starting to occur. System specs: OS: Windows 7 64-bit Processor: Intel Core 2 Duo E7200 Wolfdale 2.53GHz Video Card: XFX GeForce 9800 GT 512 MB Motherboard: Foxconn P45A-S LGA 775 Intel ATX RAM: Corsair 4 GB (2x 2GB) DDR2-800 (PC2 6400) Full specs: New PC 2008 Troubleshooting tried so far (the problem occurred again after taking each of these steps, one at a time): Updated the video drivers with the latest drivers from NVidia's site. Opened up the case and cleaned out the video card and processor fans (both were pretty dirty). Installed and ran temperature monitor software. The processor idles at about 50 degrees C, and goes up to about 63 degrees C while playing a game (seems on the warm side, but not excessively so?). The software wasn't able to report the temperature of the GPU -- not sure this particular GPU supports software temperature readout? My initial diagnosis is that maybe the GPU is on its last legs (given that it seems to be running pretty hot, and the problem only occurs while playing 3D games). Does this seem likely? Or is it likely that this problem is caused by the processor, RAM, or motherboard? Or could this be a software issue of some kind? Thanks for any advice!

    Read the article

  • Boot problem: weird sound...

    - by Wesley
    Here are the specs to put things into context: ECS P4M800PRO-M478 (V1.0) Intel P4 "Northwood" 2.8C GHz (HT) Socket 478 2x 512 MB PC2-4200 DDR2-533 RAM Visiontek Radeon HD 3650 512 MB DDR2 AGP Maxtor 120 GB SATA HDD The Best Power 500 W ATX PSU Anyways, it's not booting Windows XP SP3 properly. Specifically, there is a sound when it fails to boot and the computer automatically restarts. You can listen to the sound here. What could be the problem?

    Read the article

  • TTY with 256 colors?

    - by timn
    With URxvt and xterm it is possible to use a virtual terminal supporting 256 colors instead of only eight. Since my Intel GMA graphics card is well-supported by the KMS framebuffer driver, I am exclusively working on the TTY. Unfortunately it only supports eight colors although with MPlayer (-vo fbdev/fbdev2) and other framebuffer tools far more can be addressed. Is there a way to tell the TTY to use more than eight colors?

    Read the article

  • CPU for desktop/server

    - by jendy
    Which is the difference between a server and a desktop CPU ? Why should I buy a Xeon processor for a server why don't use instead a simple intel quad 4-core CPU for a desktop PC ?

    Read the article

  • CPU for desktop/server

    - by jendy
    Which is the difference between a server and a desktop CPU ? Why should I buy a Xeon processor for a server why don't use instead a simple Intel quad 4-core CPU for a desktop PC ?

    Read the article

  • Apple Quicktime skips during video playback

    - by Steve
    Hi, I'm on Windows XP SP3, and I'm running Apple Quicktime v7.6.5. When viewing MPEG-4 videos, every 30 seconds or so, the playback will halt for 5 seconds, and then resume at a point 10 seconds or so into the future. In essence, it is freezing and skipping. Any ideas how to combat this? My laptop is an NEC Versa, with graphics supplied by a mobile Intel 915gm/gms,910gml express chipset family. Cheers.

    Read the article

  • Setting up dual NICs under Server 2008

    - by Randall Sexton
    Hi, I'm trying to determine how to set up dual NICs on my Server 2008 box (not R2). I want all web traffic on one NIC and all Hyper-V traffic on the other. Is this possible? ( I assume that it is ) How is this done? ( A link to a tutorial you know of would be great ) Both NICs are the same (Intel PRO/1000 EB Network Connection with I/O Acceleration). Thanks in advance, Randall

    Read the article

  • Xeon X3220 Dual-Core 2.4 GHz - which march setting for gcc?

    - by hurikhan77
    Should I use -march=nocona or -march=core2 when compiling binaries for this processor with gcc 4.3? vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X3220 @ 2.40GHz stepping : 8 cpuid level : 10 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni ssse3 cx16 lahf_lm I cannot really find if this CPU is already core2 architecture... Only find information about the quad core variants, but this CPU is only dual core.

    Read the article

  • Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?

    - by Josh
    I have a dual core Intel i5 Ubuntu Server 10.04 LTS system running kernel 2.6.32-22-server #33-Ubuntu SMP with three 1TB SATA hard drives set up in a RAID5 array using linux md devices. I have read about the RAID5 write hole and am concerned: if my linux system locks up or kernel panics, should I be assume that the integrety of my data has been compromised and restore from backup? How can I know if the data on the RAID5 array is "safe"?

    Read the article

  • Browsing Bombs After a Short While

    - by Peder Rice
    After a reboot, my internet connection lasts perhaps a half hour or so before tanking. I can ping (by both IP and hostname), but I cannot browse. If I restart the "Network Store Interface Service", my connection comes back. What could be failing with that service or its dependent services that would kill my ability to browse? For some system info, I'm using a Sony Vaio with a fully-patched Windows Vista install and with an Intel 3945ABG wireless adapter.

    Read the article

  • Why is the server performance so poor? What can be done to improve the speed of the server?

    - by fslsyed
    Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

    Read the article

  • Windows 8 upgrade to windows 8.1 RTM fails with error code 0x101 - 0x2000C

    - by vzczc
    I have a MSDN Subscription and downloaded Windows 8.1 RTM today. It fails to install. After mounting the ISO and installing (with a Windows 8.1 Pro product code), selecting "Keep my apps and settings", it copies all installation files, restarts and then bluescreens at around 50%, then rolls back to the previous version. System has 64 GB Memory, Supermicro, Xeon E5-1650, Intel SSD, runs Hyper-V, Windows 8 Pro. What may be causing this and how do I fix it?

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >