Search Results

Search found 51100 results on 2044 pages for 'web to print'.

Page 840/2044 | < Previous Page | 836 837 838 839 840 841 842 843 844 845 846 847  | Next Page >

• How often is CRL refreshed, and how to force it to be?

  - by lockstock

  I have a web service running under IIS 7 that requires an X509 client certificate. I know that the server that it rus on needs access to DigiCert.com in order to be able to get the CRL (Certificate Revocation List). There is a need to change our proxy so I am attempting to investigate the impact of doing so. I have removed the global proxy settings using the command netsh winhttp proxy refesh, and also deleted the CRL cache using the command certutil -URLcache CRL delete. However, after doing this, all calls to the web service still succeed. This suggests to me that I am missing something here. So; If the CRL cache is cleared and the server has no way of refreshing the CRL, why do web service requets not return http 403?. I have been unable to find adequate information from googling nor from my colleagues. The reason I want it to fail is that I will not be confident that the new proxy settings work until I can see it broken first, if that makes sense. I would also like to be able to force the CRL to be refeshed in order to ensure that the new proxy settings work

  Read the article

• Problems sending email using .Net's SmtpClient

  - by Jason Haley

  I've been looking through questions on Stackoverflow and Serverfault but haven't found the same problem mentioned - though that may be because I just don't know enough about how email works to understand that some of the questions are really the same as mine ... here's my situation: I have a web application that uses .Net's SmtpClient to send email. The configuration of the SmtpClient uses a smtp server, username and password. The SmtpClient code executes on a server that has an ip address not in the domain the smtp server is in. In most cases the emails go without a problem - but not AOL (and maybe others - but that is one we know for sure right now). When I look at the headers in the message that was kicked back from AOL it has one less line than the successful messages hotmail gets: AOL Bad Message: Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Mon, 18 Jun 2012 09:48:24 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Good Hotmail Message: Received: from mail.domainofsmtp.com ([###.###.###.###]) by subdomainsof.hotmail.com with Microsoft SMTPSVC(6.0.3790.4900); Thu, 21 Jun 2012 09:29:13 -0700 Received: from WEBSVRNAME ([##.###.###.###]) by domainofsmtp.com with MailEnable ESMTP; Thu, 21 Jun 2012 11:29:03 -0500 MIME-Version: 1.0 From: "[email protected]" <[email protected]> ... Notice the hotmail message headers has an additional line. I'm confused as to why the Web server's name and ip address are even in the headers since I thought I was using the SmtpClient to go through the smtp server (hence the need for the username and password of a valid email box). I've read about SPFs, DKIM and SenderID's but at this point I'm not sure if I would need to do something with the web server (and its ip/domain) or the domain the smtp is coming from. Has anyone had to do anything similiar before? Am I using the smtp server as a relay? Any help on how to describe what I'm doing would also help.

  Read the article

• Migrated SCOM 2007 R2 Reporting Services but reports are gone

  - by Gabriel Guimarães

  I've migrated Reporting Services on a SCOM 2007 R2 install, and noticed that the reports have not being copied. I can create a new report, but the ones I've had because of the management packs are gone. I've tried re-applying the Management Packs however it doesn't re-deploy them and when I try to access for example: Monitoring - Microsoft Windows Print Server - Microsoft Windows Server 2000 and 2003 Print Services - State View - select any item and click Alerts on the right menu. I get the following error: Date: 12/24/2010 12:40:35 PM Application: System Center Operations Manager 2007 R2 Application Version: 6.1.7221.0 Severity: Error Message: Cannot initialize report. Microsoft.Reporting.WinForms.ReportServerException: The item '/Microsoft.SystemCenter.DataWarehouse.Report.Library/Microsoft.SystemCenter.DataWarehouse.Report.Alert' cannot be found. (rsItemNotFound) at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo() at Microsoft.Reporting.WinForms.ServerReport.GetParameters() at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport) at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args) The report doesn't exist on the reporting services side. how do I re-deploy this reports? Any help is appreciated. Thanks in advance.

  Read the article

• Solaris TCP stack tuning

  - by disserman

  We have a large web project (about 2-3k requests per second), using haproxy (http://haproxy.1wt.eu/) as a frontend and load balancer between the java application servers. The frontend (haproxy) is running on Linux but we are going to migrate it to the Solaris 10 as all our other servers are running under Solaris. After switching a traffic I see the two things: a) the web site became loading slower (5-10 seconds with images in comparison to 2-3 seconds on Linux) b) sometimes haproxy fails to perform a "lifecheck" (get a special web page and analyze http response code) due to the socket timeout. After switching traffic back to Linux everything is okay. I've tried to tune all params I found in /dev/tcp but no progress. I believe the problem is in some open socket limitations. If someone can point me to the answer, I would be greatly appreciated. p.s. haproxy is running under Xen DomU on Linux (Kernel 2.6.18, Debian 5), under zone on Solaris (10 u8). the only thing we did on Linux is increasing of ip_conntrack_max (I believe Solaris option tcp_conn_req_max_q is the equivalent).

  Read the article

• Mod_Perl configuration for multiple domains

  - by daliaessam

  Reading the Mod_Perl module documentation, can we configure it on per domain basis, what I mean can we configure it to run on every domain or specific domain only. What I see in the docs is: Registry Scripts To enable registry scripts add to httpd.conf: Alias /perl/ /home/httpd/2.0/perl/ <Location /perl/> SetHandler perl-script PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </Location> and now assuming that we have the following script: #!/usr/bin/perl print "Content-type: text/plain\n\n"; print "mod_perl 2.0 rocks!\n"; saved in /home/httpd/httpd-2.0/perl/rock.pl. Make the script executable and readable by everybody: % chmod a+rx /home/httpd/httpd-2.0/perl/rock.pl Of course the path to the script should be readable by the server too. In the real world you probably want to have a tighter permissions, but for the purpose of testing, that things are working, this is just fine. From what I understand above, we can run Perl scripts only from one specific folder that we put the directive above. So the question again, can we make this directive per domain for all domains or for specific number of domains?

  Read the article

• Upgrading from SQL2000 database to SQL Express 2008 R2

  - by itwb

  Hi, We have a web application which uses a MSSQL 2000 backend database. We are currently paying a ridiculous amount for Shared Hosting, with the database costs alone costing us $150 per month (MSSQL 100mb extra space is $40 per month). Our database size is 896.38 MB I am looking at getting a Virtual Private Server and upgrading the database to a MSSQL2008 Express database. I am aware that the Express version is limited to a 10GB database (with R2), and is constrained to a single CPU. I have also been offered SQL Server 2008 Web Edition for $19/per month, but I cannot find many details on the difference between Express and Web. Any suggestions here? What I would also like to know is: If we upgrade the database to MSSQL 2008 database, is there any issues with possible data transformations in the future? I.e. Is it possible to download and mount it with SQL Server 2008 Standard edition? I'm more concerned about how to get data in and out of the database through SQL Management tools. Are there any other issues that I might face? Thanks, Mike

  Read the article

• Generic RPM package for Python 2.x

  - by RaphDG

  I have a python application, it can run on Python = 2.6 and it's architecture independant. I need the rpm package of this application to be installed on Fedora 14 (python 2.7) and Centos 6.2 (python 2.6). I currently use mock to build one rpm package for each "flavour" and it works well. I apparently can't install the Centos compiled rpm on Fedora. It gives me this error message : error: Failed dependencies: python(abi) = 2.6 is needed by myapp-0.9.el6.noarch Here is the relevant part of my .spec file : %{!?python_sitelib: %global python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")} %{!?python_sitearch: %global python_sitearch %(%{__python} -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")} Name: myapp Version: #VERSION# Release: #RELEASE#%{dist} Summary: myapp Group: Development/Languages License: Apache v2 Source0: %{name}-%{version}-#RELEASE#.tar.gz BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildArch: noarch BuildRequires: python-devel BuildRequires: python-setuptools %description myapp %prep %setup -c %build %{__python} setup.py build %install %{__rm} -rf %{buildroot} %{__python} setup.py install -O1 --skip-build --root %{buildroot} Do I really have to use mock and build 2 rpms or is there another way to create a single generic 2.x rpm package ?

  Read the article

• Is it possible to rate limit based on host headers? i.e. not just on ip address

  - by Blankman

  I have a web service endpoint that I am building where people will post an xml file to, and it will really get pounded with over 1K requests per second. Now they are sending in these xml files via http post, but a good majority of them will be rate limited. The problem is, the rate limiting will be done by the web application by looking up the source_id in the xml, and if it is over x requests per minute, it will not be processed further. I was wondering if I could do rate limit checking earlier in the processing somehow and thus save the 50K file going threw the pipeline to my web servers and eating up resources. Could a load balancer make a call out to verify rate usage somehow? If this is possible, I could maybe put the source_id in a host header so even the XML file doesn't have to be parsed and loaded into memory. Is it possible to just look at host headers and not load up the entire 50K xml file into memory? I really appreciate your insights as this takes more knowledge of the entire tcp/ip stack etc.

  Read the article

• Configuring suExec to work with Apache and PHP via FastCGI

  - by RandomPsychology

  I have installed ISPConfig 3 on an Ubuntu VPS and configured it for Apache + PHP via FastCGI and suexec. I am able to upload PHP apps (e.g. Wordpress) and run them normally w/ suexec. However, for some reason the PHP scripts cannot write data to disk. For instance, trying to upgrade a plugin via Wordpress' web interface causes it to fail with the error "Could not create directory /path/to/wp-content/upgrade/plugin.tmp." Trying to upload media and other assets also fails via the web. I've checked owner/group on the directory structure and it looks good. The suExec log also seems to be normal and I don't see any indicative errors in the web server logs. I can also confirm that changing the owner/group on the directories does result in the expected error in suexec.log. Additionally, I have the directory permissions set to u=rw,g=r,o= and I've also tried setting g=rw. None of this results in my scripts being able to write to the directories. What am I doing wrong?

  Read the article

• Running CGI With Perl under Apache Permission Problem

  - by neversaint

  I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

  Read the article

• Running CGI With Perl under Apache Permission Problem

  - by neversaint

  I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /mychosendir/cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

  Read the article

• How to monitor process hogging CPU on a remote server

  - by sergeb

  I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

  Read the article

• MMC crashes on Windows Server 2008 x64 - Exchange console, event viewer

  - by David M Williams

  Help! I don't know what happened; this server has been very reliable but suddenly began having problems with a particular .NET 2.0 web site simply hanging - it wouldn't load at all. However, another ASP.NET site was still fine. Reinstalling the site didn't fix it, nor did deleting and re-creating the application within IIS. Trying the event viewer was met with a horrifying "Microsoft Management Console has stopped working". Some Googling led me to believe the .NET framework was the problem. I found a tool called the .NET cleanup tool - http://blogs.msdn.com/astebner/pages/8904493.aspx - which cleaned out .NET entirely. I reinstalled .NET 1.1 and 3.5 (which installed 2.0 and 3.0 as well). Using the .NET verification tool - http://blogs.msdn.com/astebner/pages/8999004.aspx - I believe these have all installed ok. However, my server is in worse shape now. The Exchange 2010 Management Console crashes with an MMC error and now my other (previously reliable) .NET web app now hangs on loading too. I thought I should use Computer Management to remove and re-add the application and web server roles but sure enough, MMC crashes. If anyone can help I will be extremely grateful. Thank you !

  Read the article

• How can I "share" a network share over the internet to multiple operating systems?

  - by Minsc

  Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

  Read the article

• HP LaserJet 2550 has a carousel motor error

  - by Arlen Beiler

  I have a LaserJet 2550, and it's worked pretty good for a long time (except for some slowness a while back, spooling I think), but just recently it suddenly quit working. We moved this summer, but left it at our other place, and just recently when my Dad went over there to try to print something out, it didn't work. When you turn it on, you hear the fan give a false start (basically a quick pulse), and the carousel goes through its usual thing. Then it starts up in earnest like it's getting ready to print something. All of a sudden it just stops. Everything stops, and the three lower lights are steady. When I push the Go button, the Go light (bottom of the 3) turns off, but the other two stay on. I looked it up on the HP website and it says it is a carousel motor problem. I called HP, but they said it is out of warranty. I've opened the cover and held the switch with a screw driver so I could watch it, and it goes through its thing like I described (doesn't seem to make a difference whether the imaging drum is in or not), then when it stops it kind of seems to jump back a little bit (the carousel). I hope this all makes sense (I know you like details), and hopefully you also know what to do to fix it. Thanks.

  Read the article

• Steps after installing vCenter Server?

  - by goober

  I'm working with: Two new ESX servers that I'm configuring A new Server 2008 R2 machine that I'm using for vCenter. I took the following steps: Installed the Hypervisor on the 2 ESX machines Checked their setup/connectivity (appears to be fine; can ping, etc.) Installed vCenter Server on the Win2k8R2 box. This included the install of a SQL Express database (we're a small shop) FYI, I changed some of the ports (443 -- 8443, 80 --8080, etc.) Installed vCenter Web Client Server on the Win2k8R2 box Problems my vSphere Client on my Desktop fails to connect. Part of this is that it asks me for a username and password, but I don't recall specifying one when I set up the install. I receive the error "vSphere Client could not connect to [machinename]. An unknown connection error occurred. (The request failed because of a connection failure. (Unable to connect to the remote server))" I have also tried to use local machine admin credentials, including the format machinename\localuseracct. I have also tried using my domain credentials which are an admin for that box. I have also checked and the service is running. I also tried to connect via vSphere client locally installed on the server. It translates "localhost" to the correct name but gives the same error. I cannot register the vCenter server from the vCenter Web Client Server. I'm not sure if this is necessary, as they're both on the same machine, but it seems like the logical next step. I also receive a "failed to connect" error in this case as well. FYI, both the vCenter server and the vCenter Web Client Server are installed on the same Win2k8R2 server. What am I missing here? What is the best way to test in this case?

  Read the article

• Azure load-balancing strategy

  - by growse

  I'm currently building out a small web deployment using VM instances on MS Azure. The main problem I'm facing at the moment is trying to figure out how to get the load-balancing to detect if a particular VM has failed and not route traffic to that VM. As far as I can tell, there are only only two load-balancing options: Have multiple VMs (web01, web02, web03 etc.) within the same 'cloud service' behind a single VIP, and configure the endpoints to be load balanced. Create multiple 'cloud services', put a single web VM in each and create a traffic manager service across all these services. It appears that (1) is extremely simplistic and doesn't attempt to do any host failure detection. (2) appears to be much more varied, but requires me to put all my webservers in their own individual cloud service. Traffic manager appears to be much more directed at a geographic failover scenario, where you have multiple cloud services across different regions. This approach also has the disadvantage in that my web servers won't be able to communicate with my databases on internal IP addresses, unlike scenario (1). What's the best approach here?

  Read the article

• RRAS VPN on windows 2k3 AD, can access rras server only.

  - by nopsax

  I'm setting up a test lab and here is the current configuration: 192.168.86.201 - a windows 2003 machine acting as PDC with AD/DNS/DHCP/WINS. 192.168.86.62 - windows 2003 machine is the RRAS server with IAS, also a file/print server. 192.168.86.6 - gateway/router to internet 192.168.86.21 - Windows XP Workstation Everything works on the internal network, File/Print/AD etc. Whenever a user connects via vpn to the RRAS server remotely using their domain credentials, they are assigned an ip address from the 192.168.86.201 machine along with the wins server address etc. The vpn user can then ping/access resources on the RRAS server, but cannot ping/access resources of any other machines by name or ip. However, if I ping by name, it does resolve to the correct ip address, just no replies. I did notice that on the RRAS server the 'internal' interface gets an ip address of 192.168.86.75 when a remote user connects, and the remote user is assigned, for example 192.168.86.71 . The RRAS server responds on both the .62 and .75 ip addresses. The client also unchecks the 'use remote default gateway option'. Also, I tried connecting a laptop to the physical network, joining the domain, then going remote and dialing the connection before domain login, and everything seems to work, e.g. browse-able shares via network neighborhood. But I can't really join the domain remotely if I cannot access any other resources. I really need to monitor traffic to see whats happening to those packets but won't be able to until this weekend. Any help is appreciated, will provide whatever configurations are needed.

  Read the article

• How to edit a read-only document in LibreOffice?

  - by TestUser16418

  I need to fill a form (which I received in .doc format and saved as .odt). The file is read-only except for the fields where I can enter the information. Unfortunately, with the fields filled it doesn't fit on one page, and I need to edit it so I can print and submit it. With LibreOffice beta 3, I could edit anything outside of the fields, and the fonts were slightly smaller, so it fit on the page even with the fields filled. Today I upgraded LibreOffice, and when I opened to edit a field where I had a mistake, it no longer fits on the page, and I can't edit it. When I opened the properties it says that the document is NOT read-only, but it is. When I try to delete text it tells me that I can't edit the read-only content. Can anyone give me some advice, because I've been trying to print my form for 2 hours already. I tried AbiWord and KWord, but both are missing elements from the page (though the forms fit). I can also edit the margins (Format - Page is dimmed, but when I begin to edit a field it's no longer dimmed)med

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• ISA 2006 SP1 - SSL Client Certificate Authentication in Workgroup Environment

  - by JoshODBrown

  We have an IIS6 website that was previously published using an ISA 2006 SP1 standard server publishing rule. In IIS we had required a client certificate be provided before the website could be accessed... this all worked fine and dandy. Now we wish to use a web publishing rule on ISA 2006 SP1 for this same website. However, it seems the client certificate doesn't get processed now, so of course the user can't access the website. I've read a few articles stating the CA for the certificate needs to be installed in the trusted root certificate authorities store on the ISA Server (i have done this), as well as installing the client certificate on the ISA Server (done as well). I have also verified that the ISA Server is able to access the CRL for our CA no problem... In the listener properties for the web publishing rule, under Authentication, and Client Authentication Method, there is an option for SSL Client Certificate Authentication... i select this, but it appears the only Authentication Validation Method selectable is Windows (Active Directory).... there is no Active Directory in this environment. When i configure the rule with the defaults, I then try to hit my website and it prompts for my certificate, i choose it and hit ok... then I'm given the following error Error Code: 500 Internal Server Error. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202) I check the event logs on the ISA Server and in Security Logs, i see Event ID 536, Failure Aud. The reason: The NetLogon component is not active. I think this is pretty obvious since there is no active directory available. Is there a way to make this web publishing rule work using client certificates in this workgroup environment? Any suggestions or links to helpful documents would be greatly appreciated!

  Read the article

• Apache (Solaris 10): 2 symlinks to the same file, one works the other doesn't

  - by justcatchingrye

  I'm seeing a strange issue with Apache I have a system that pulls a configuration file from a web server. I want to use a symlink with the name 'ocds-dpsarch01a.rules'. This doesn't work. However, if I change one character in that name and link it to the same file, it works - See below I can't think of any reason why one symlink would work when another doesn't? I would have thought either the Apache configuration is right and all symlinks work, or it isn't and no syslinks work(?) Any thoughts welcome ls -l /REMOVED/apache2/htdocs/rules/syslog/*cds-dpsarch01a.rules lrwxrwxrwx 1 root root 62 May 13 13:55 ocds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules lrwxrwxrwx 1 root root 62 May 13 13:52 xcds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules 1) Application starting and successfully reading configuration from the web server 13/05/2010 13:56:37: Information: Connecting ... 13/05/2010 13:56:37: Debug: Reading REMOVED:// REMOVED /rules/syslog/xcds-dpsarch01a.rules 13/05/2010 13:56:37: Debug: HTTP response: HTTP/1.1 200 OK Date: Thu, 13 May 2010 13:56:34 GMT Server: Apache Last-Modified: Fri, 09 Apr 2010 12:28:26 GMT ETag: "5073-a744-ee92ae80" Accept-Ranges: bytes Content-Length: 42820 Cache-Control: max-age=5 Expires: Thu, 13 May 2010 13:56:39 GMT NL7C-Filtered: Content-Type: text/plain Connection: close 13/05/2010 13:56:37: Debug: Plain text rules file detected. 2) Application starting and failing to read configuration from the web server 13/05/2010 13:56:55: Information: Connecting ... 13/05/2010 13:56:55: Debug: Reading REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules 13/05/2010 13:56:55: Debug: HTTP response: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP GET failed 13/05/2010 13:56:55: Error: Failed to open Rules file: REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• Apache, suexec, PHP, suPHP

  - by Chris_K

  While I'm quite comfortable as a Linux user, my Linux Admin-fu is a bit weak. Thus, I'm here looking for guidance with a CentOS server I'm about to build. I need to setup an Apache2 web server for a few of our clients. I want each client's web content to be under their home directory (USERDIR in apache.conf, right?) for the static HTML sites. I want Apache to run as the client (suexec?). Some of their stuff will be PHP apps and I'm under the impression I'll want to look at suphp as well then. So basically I want to look like a small version of a shared web hosting company. Considering how common those are I thought I'd easily find a nice current How-To guide on setting this all up but so far I've had very little luck. I suspect my search words are off. So the questions (feel free to answer any or all): Anyone have some solid links to current/modern guides that would help me set this all up? No, the apache documentation site is not a guide ;-) Since I have a mix of static sites and PHP apps do I want/need both suexec and suphp installed? If so, does that introduce any challenges I should be aware of? Should I be looking at other options instead of suexec and suphp? I plan to give the end users SSH, SFTP or SCP access to their stuff (if that affects anything). Thanks in advance for your help.

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

< Previous Page | 836 837 838 839 840 841 842 843 844 845 846 847  | Next Page >