Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 846/1051 | < Previous Page | 842 843 844 845 846 847 848 849 850 851 852 853  | Next Page >

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • svnstat script

    - by Kyle Hodgson
    So I'm building out a shell script to check out all of our relevant svn repositories for analysis in svnstat. I've gotten all of this to work manually, now I'm writing up a bash script in cygwin on my Vista laptop, as I intend to move this to a Linux server at some point. Edit: I gave up on this and wrote a simple .bat script. I'll figure out the Linux deployment some other way. Edit: added the sleep 30 and svn log commands. I can tell now, with the svn log command, that it's not getting to the svn log ... this time, it did Applications, and ran the log, and then check out Database, and froze. I'll put the sleep 30 before and after the log this time. co2.sh #!/bin/bash function checkout { mkdir $1 svn checkout svn://dev-server/$1 $1 svn log --verbose --xml >> svn.log $1 sleep 30 } cd /cygdrive/c/Users/My\ User/Documents/Repos/wc checkout Applications checkout Database checkout WebServer/www.mysite.com checkout WebServer/anotherhost.mysite.com checkout WebServer/AnotherApp checkout WebServer/thirdhost.mysite.com checkout WebServer/fourthhost.mysite.com checkout WebServer/WebServices It works, for the most part - but for some reason it has a tendency to stop working after a few repositories, usually right after finishing a repository before going to the next one. When it fails, it will not recover on its own. I've tried commenting out the svn line, it goes in and creates all the directories just fine when I do that - so its not that. I'm looking for direction as well as direct advice. Cygwin has been very stable for me, but I did start using the native rxvt instead of "bash in a cmd.exe window" recently. I don't think that's the problem, as I've left top on remote systems running all night and rxvt didn't seem to mind. Also I haven't done any bash scripting in cygwin so I suppose this might not be recommended; though I can't see why not. I don't want all of WebServer, hence me only checking out certain folders like that. What I suspect is that something is hanging up the svn checkout. Any ideas here? Edit: this time when I hit ctrl+z to cancel out, I forgot I was on Windows and typed ps to see if the job was still running; and as you can see there are lots of svn processes hanging around... strange. Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [1]- Stopped bash co2.sh [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ kill %1 [1]- Stopped bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ [1]- Terminated bash co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ ps PID PPID PGID WINPID TTY UID STIME COMMAND 7872 1 7872 2340 0 1000 Jun 29 /usr/bin/svn 7752 1 6140 7828 1 1000 Jun 29 /usr/bin/svn 6192 1 5044 2192 1 1000 Jun 30 /usr/bin/svn 7292 1 7452 1796 1 1000 Jun 30 /usr/bin/svn 6236 1 7304 7468 2 1000 Jul 2 /usr/bin/svn 1564 1 5032 7144 2 1000 Jul 2 /usr/bin/svn 9072 1 3960 6276 3 1000 Jul 3 /usr/bin/svn 5876 1 5876 5876 con 1000 11:22:10 /usr/bin/rxvt 924 5876 924 10192 4 1000 11:22:10 /usr/bin/bash 7212 1 7332 5584 4 1000 13:17:54 /usr/bin/svn 9412 1 5480 8840 4 1000 15:38:16 /usr/bin/svn S 8128 924 8128 9452 4 1000 17:38:05 /usr/bin/bash 9132 8128 8128 8172 4 1000 17:43:25 /usr/bin/svn 3512 1 3512 3512 con 1000 17:43:50 /usr/bin/rxvt I 10200 3512 10200 6616 5 1000 17:43:51 /usr/bin/bash 9732 1 9732 9732 con 1000 17:45:55 /usr/bin/rxvt 3148 9732 3148 8976 6 1000 17:45:55 /usr/bin/bash 5856 3148 5856 876 6 1000 17:51:00 /usr/bin/vim 7736 924 7736 8036 4 1000 17:53:26 /usr/bin/ps Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ jobs [2]+ Stopped ./co2.sh Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ Here's an strace on the PID of the hung svn program, it's been like this for hours. Looks like its just doing nothing. I keep suspecting that some interruption on the server is causing this; does svn have a locking mechanism I'm not aware of? Kyle Hodgson@KyleHodgson-PC ~/winUser/Documents/Repos $ strace -p 7304 ********************************************** Program name: C:\cygwin\bin\svn.exe (pid 7304, ppid 6408) App version: 1005.25, api: 0.156 DLL version: 1005.25, api: 0.156 DLL build: 2008-06-12 19:34 OS version: Windows NT-6.0 Heap size: 402653184 Date/Time: 2009-07-06 18:20:11 **********************************************

    Read the article

  • Does likewise-open > version 5.4 contain CIFS support?

    - by Ben Andken
    I'm trying to get the CIFS server working in likewise-open. I've found this set of instructions and everything seems to work until I try to connect ([url]http://www.likewise.com/resources/documentation_library/manuals/cifs/likewise-cifs-smb-file-server-guide.html#id2765992):[/url] 1.6. Build and Configure a Standalone Likewise-CIFS Server This section demonstrates how to build and configure a standalone instance of Likewise-CIFS from the command line. The following procedure assumes that you want to set up Likewise-CIFS on a Linux server to share files with Windows computers in a network without Active Directory. This procedure also assumes you know how to build Linux applications from their source code and then install them. Download Likewise-CIFS from its open source git location: $ git clone git://git.likewiseopen.org/ Download, build, and install the following tools. The tools listed are known to work, but earlier or later versions might work as well. Also, instead of downloading the tools, you might be able to install them on your platform with apt-get or some other means. http://ftp.gnu.org/gnu/autoconf/autoconf-2.65.tar.gz http://ftp.gnu.org/gnu/automake/automake-1.9.6.tar.gz http://ftp.gnu.org/gnu/libtool/libtool-2.2.6a.tar.gz http://pkgconfig.freedesktop.org/releases/pkg-config-0.23.tar.gz gcc --version 3.x or greater Build Likewise-CIFS: $ cd likewise-open $ build/mkcomp --debug all Install Likewise-CIFS: $ sudo su $ cd staging/install-root $ tar cf - . | (cd / && tar xvf -) Make sure Samba is not running: $ /etc/init.d/smb stop Make sure SELinux is either disabled or set to permissive. Make sure the ports required by Likewise are open. For a list of ports that Likewise uses, see the Likewise Open Installation and Administration Guide. Configure Likewise Open: $ /etc/init.d/lwsmd start $ for i in /etc/likewise/*.reg; do /opt/likewise/bin/lwregshell upgrade $i; done $ /etc/init.d/lwsmd stop $ /etc/init.d/lwsmd start $ /opt/likewise/bin/lwsm start srvsvc $ /opt/likewise/bin/domainjoin-cli configure --enable nsswitch Add a user account to the local Likewise provider database. In the following example, substitute the account name that you want for newuser. $ /opt/likewise/bin/lw-add-user --home /home/newuser --shell /bin/bash newuser Successfully added user newuser Enable the user and set the password: $ /opt/likewise/bin/lw-mod-user --enable-user --set-password newuser New Password: ********** Successfully modified user newuser Look up new user's identity as follows. Substitute the value from the command hostname -s for the hostname. Keep in mind that Likewise truncates a hostname longer than 15 characters to the first 15 characters of the string. % id hostname\\newuser uid=2000(HOSTNAME\newuser) gid=1800(HOSTNAME\Likewise Users) groups=1800(HOSTNAME\Likewise Users) context=system_u:system_r:unconfined_t:s0 Make a CIFS directory for the user: mkdir /lwcifs/newuser chown 2000:1800 /lwcifs/newuser From a Windows computer, map the Likewise-CIFS drive share: Computer->Map Network Drive... Folder: \\IP_hostname\c$ Click "Finish" Username: hostname\newuser Password: user_password The last step fails when I try to connect. I've tried with Windows XP Pro and Windows 7 Pro. The rest of the directions only appear to work for version 5.4 (the one that shipped with 10.04). For 12.04, version 6.1 is the only one available and it doesn't appear to have the srvsvc module mentioned in these instructions. Is CIFS support dropped in the 6.1 version of likewise-open?

    Read the article

  • Apache logs 200 instead of 404

    - by elle
    I've been getting the following in my apache access log: "GET /work//?module=www&section=working=../../../../../../../../../../../../../../../../../../../../../../../..//proc/self/environ%0000 HTTP/1.1" 200 5187 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; pl-PL; rv:1.8.1.24pre) Gecko/20100228 K-Meleon/1.5.4\",\"Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/540.0 (KHTML,like Gecko) Chrome/9.1.0.0 Safari/540.0\",\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Comodo_Dragon/4.1.1.11 Chrome/4.1.249.1042 Safari/532.5\",\"Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.0.16) Gecko/2009122206 Firefox/3.0.16 Flock/2.5.6\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.1 (KHTML, like Gecko) Maxthon/3.0.8.2 Safari/533.1\",\"Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.8.1.8pre) Gecko/20070928 Firefox/2.0.0.7 Navigator/9.0RC1\",\"Opera/9.99 (Windows NT 5.1; U; pl) Presto/9.9.9\",\"Mozilla/5.0 (Windows; U; Windows NT 6.1; zh-HK) AppleWebKit/533.18.1 (KHTML, like Gecko) Version/5.0.2 Safari/533.18.5\",\"Seamonkey-1.1.13-1(X11; U; GNU Fedora fc 10) Gecko/20081112\",\"Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Win64; x64; Trident/5.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Zune 4.0; Tablet PC 2.0; InfoPath.3; .NET4.0C; .NET4.0E)\",\"Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; .NET4.0C; .NET4.0E; InfoPath.3)" If I try the URL, I get a 404 instead of 200 which the above request received. Is there a way I can confirm that the 200 was real and not spoofed? Where is the long info on the client coming from?

    Read the article

  • Setting up RADIUS + LDAP for WPA2 on Ubuntu

    - by Morten Siebuhr
    I'm setting up a wireless network for ~150 users. In short, I'm looking for a guide to set RADIUS server to authenticate WPA2 against a LDAP. On Ubuntu. I got a working LDAP, but as it is not in production use, it can very easily be adapted to whatever changes this project may require. I've been looking at FreeRADIUS, but any RADIUS server will do. We got a separate physical network just for WiFi, so not too many worries about security on that front. Our AP's are HP's low end enterprise stuff - they seem to support whatever you can think of. All Ubuntu Server, baby! And the bad news: I now somebody less knowledgeable than me will eventually take over administration, so the setup has to be as "trivial" as possible. So far, our setup is based only on software from the Ubuntu repositories, with exception of our LDAP administration web application and a few small special scripts. So no "fetch package X, untar, ./configure"-things if avoidable. UPDATE 2009-08-18: While I found several useful resources, there is one serious obstacle: Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Basically the Ubuntu version of FreeRADIUS does not support SSL (bug 183840), which makes all the secure EAP-types useless. Bummer. But some useful documentation for anybody interested: http://vuksan.com/linux/dot1x/802-1x-LDAP.html http://tldp.org/HOWTO/html_single/8021X-HOWTO/#confradius UPDATE 2009-08-19: I ended up compiling my own FreeRADIUS package yesterday evening - there's a really good recipe at http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html (See the comments to the post for updated instructions). I got a certificate from http://CACert.org (you should probably get a "real" cert if possible) Then I followed the instructions at http://vuksan.com/linux/dot1x/802-1x-LDAP.html. This links to http://tldp.org/HOWTO/html_single/8021X-HOWTO/, which is a very worthwhile read if you want to know how WiFi security works. UPDATE 2009-08-27: After following the above guide, I've managed to get FreeRADIUS to talk to LDAP: I've created a test user in LDAP, with the password mr2Yx36M - this gives an LDAP entry roughly of: uid: testuser sambaLMPassword: CF3D6F8A92967E0FE72C57EF50F76A05 sambaNTPassword: DA44187ECA97B7C14A22F29F52BEBD90 userPassword: {SSHA}Z0SwaKO5tuGxgxtceRDjiDGFy6bRL6ja When using radtest, I can connect fine: > radtest testuser "mr2Yx36N" sbhr.dk 0 radius-private-password Sending Access-Request of id 215 to 130.225.235.6 port 1812 User-Name = "msiebuhr" User-Password = "mr2Yx36N" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 130.225.235.6 port 1812, id=215, length=20 > But when I try through the AP, it doesn't fly - while it does confirm that it figures out the NT and LM passwords: ... rlm_ldap: sambaNTPassword -> NT-Password == 0x4441343431383745434139374237433134413232463239463532424542443930 rlm_ldap: sambaLMPassword -> LM-Password == 0x4346334436463841393239363745304645373243353745463530463736413035 [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user testuser authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding ... It is clear that the NT and LM passwords differ from the above, yet the message [ldap] user testuser authorized to use remote access - and the user is later rejected...

    Read the article

  • OpenBSD configuration: Client unable to mount via NFS using Berkeley Automounter (amd)

    - by Rilindo
    What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

    Read the article

  • OpenBSD configuration: Client unable to automount via NFS using amd

    - by Rilindo
    What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

    Read the article

  • Xen kernel can't see 2 disks of 6 of 1TB, does it have a limitation?

    - by PartySoft
    Linux gentoo-xen 2.6.18-xen-r12 #3 SMP Tue Oct 5 09:28:53 PDT 2010 x86_64 Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux I have 6 disks of 1 TB and i can't see all of them only 4, can anyone give me an ideea what can i do ? Filesystem Size Used Avail Use% Mounted on rootfs 886G 4.4G 836G 1% / /dev/sda3 886G 4.4G 836G 1% / rc-svcdir 1.0M 44K 980K 5% /lib64/rc/init.d shm 7.9G 0 7.9G 0% /dev/shm /dev/sdb1 917G 200M 871G 1% /home2 /dev/sdc1 917G 200M 871G 1% /home3 /dev/sdd1 917G 200M 871G 1% /home4 The hardware is Dual xeon E5506 processors on a supermicro X8DTL mobo 4.346585] ata3.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.346588] ata3.00: ata3: dev 0 multi count 16 [ 4.352861] ata3.00: configured for UDMA/133 [ 4.352867] scsi3 : ata_piix [ 4.352875] PM: Adding info for No Bus:host3 [ 4.510584] ata4.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.510587] ata4.00: ata4: dev 0 multi count 16 [ 4.516848] ata4.00: configured for UDMA/133 [ 4.516861] PM: Adding info for No Bus:target2:0:0 [ 4.516905] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.516910] Type: Direct-Access ANSI SCSI revision: 05 [ 4.516920] PM: Adding info for scsi:2:0:0:0 [ 4.517452] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517460] sde: Write Protect is off [ 4.517461] sde: Mode Sense: 00 3a 00 00 [ 4.517478] SCSI device sde: drive cache: write back [ 4.517514] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517521] sde: Write Protect is off [ 4.517522] sde: Mode Sense: 00 3a 00 00 [ 4.517532] SCSI device sde: drive cache: write back [ 4.517534] sde: sde1 [ 4.524551] sd 2:0:0:0: Attached scsi disk sde [ 4.524855] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 4.524874] PM: Adding info for No Bus:target3:0:0 [ 4.524928] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.524933] Type: Direct-Access ANSI SCSI revision: 05 [ 4.524946] PM: Adding info for scsi:3:0:0:0 [ 4.525216] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525227] sdf: Write Protect is off [ 4.525228] sdf: Mode Sense: 00 3a 00 00 [ 4.525242] SCSI device sdf: drive cache: write back [ 4.525280] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525286] sdf: Write Protect is off [ 4.525289] sdf: Mode Sense: 00 3a 00 00 [ 4.525301] SCSI device sdf: drive cache: write back [ 4.525302] sdf: sdf1 [ 4.532691] sd 3:0:0:0: Attached scsi disk sdf [ 4.533010] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 4.977669] scsi: <fdomain> Detection failed (no card) [ 5.030479] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.030635] GDT-HA: Found 0 PCI Storage RAID Controllers [ 5.372350] Fusion MPT base driver 3.04.01 [ 5.372358] Copyright (c) 1999-2005 LSI Logic Corporation [ 5.579176] Fusion MPT SPI Host driver 3.04.01 [ 5.881777] ieee1394: Initialized config rom entry `ip1394' [ 6.166745] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 6.166748] ieee1394: sbp2: Try serialize_io=0 for better performance [ 6.428866] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 6.428872] md: bitmap version 4.39 [ 6.431518] md: raid0 personality registered for level 0 [ 6.495979] md: raid1 personality registered for level 1 [ 6.570270] raid5: automatically using best checksumming function: generic_sse [ 6.575523] generic_sse: 6608.000 MB/sec [ 6.575526] raid5: using function: generic_sse (6608.000 MB/sec) [ 6.596226] raid6: int64x1 1835 MB/s [ 6.613231] raid6: int64x2 1773 MB/s [ 6.630256] raid6: int64x4 1675 MB/s [ 6.647296] raid6: int64x8 1027 MB/s [ 6.664267] raid6: sse2x1 3578 MB/s [ 6.681268] raid6: sse2x2 4207 MB/s [ 6.698280] raid6: sse2x4 4625 MB/s [ 6.698281] raid6: using algorithm sse2x4 (4625 MB/s) [ 6.698285] md: raid6 personality registered for level 6 [ 6.698286] md: raid5 personality registered for level 5 [ 6.698288] md: raid4 personality registered for level 4 [ 6.781090] md: raid10 personality registered for level 10 [ 7.007043] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 7.007046] Copyright (c) 1999-2006 Intel Corporation. [ 9.229465] kjournald starting. Commit interval 5 seconds [ 9.229476] EXT3-fs: mounted filesystem with ordered data mode.

    Read the article

  • Kernel panic when bringing up DRBD resource

    - by sc.
    I'm trying to set up two machines synchonizing with DRBD. The storage is setup as follows: PV - LVM - DRBD - CLVM - GFS2. DRBD is set up in dual primary mode. The first server is set up and running fine in primary mode. The drives on the first server have data on them. I've set up the second server and I'm trying to bring up the DRBD resources. I created all the base LVM's to match the first server. After initializing the resources with `` drbdadm create-md storage I'm bringing up the resources by issuing drbdadm up storage After issuing that command, I get a kernel panic and the server reboots in 30 seconds. Here's a screen capture. My configuration is as follows: OS: CentOS 6 uname -a Linux host.structuralcomponents.net 2.6.32-279.5.2.el6.x86_64 #1 SMP Fri Aug 24 01:07:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux rpm -qa | grep drbd kmod-drbd84-8.4.1-2.el6.elrepo.x86_64 drbd84-utils-8.4.1-2.el6.elrepo.x86_64 cat /etc/drbd.d/global_common.conf global { usage-count yes; # minor-count dialog-refresh disable-ip-verification } common { handlers { pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b /proc/sysrq-trigger ; reboot -f"; local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o /proc/sysrq-trigger ; halt -f"; # fence-peer "/usr/lib/drbd/crm-fence-peer.sh"; # split-brain "/usr/lib/drbd/notify-split-brain.sh root"; # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root"; # before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k"; # after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh; } startup { # wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb become-primary-on both; wfc-timeout 30; degr-wfc-timeout 10; outdated-wfc-timeout 10; } options { # cpu-mask on-no-data-accessible } disk { # size max-bio-bvecs on-io-error fencing disk-barrier disk-flushes # disk-drain md-flushes resync-rate resync-after al-extents # c-plan-ahead c-delay-target c-fill-target c-max-rate # c-min-rate disk-timeout } net { # protocol timeout max-epoch-size max-buffers unplug-watermark # connect-int ping-int sndbuf-size rcvbuf-size ko-count # allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri # after-sb-1pri after-sb-2pri always-asbp rr-conflict # ping-timeout data-integrity-alg tcp-cork on-congestion # congestion-fill congestion-extents csums-alg verify-alg # use-rle protocol C; allow-two-primaries yes; after-sb-0pri discard-zero-changes; after-sb-1pri discard-secondary; after-sb-2pri disconnect; } } cat /etc/drbd.d/storage.res resource storage { device /dev/drbd0; meta-disk internal; on host.structuralcomponents.net { address 10.10.1.120:7788; disk /dev/vg_storage/lv_storage; } on host2.structuralcomponents.net { address 10.10.1.121:7788; disk /dev/vg_storage/lv_storage; } /var/log/messages is not logging anything about the crash. I've been trying to find a cause of this but I've come up with nothing. Can anyone help me out? Thanks.

    Read the article

  • Incorrect gzipping of http requests, can't find who's doing it

    - by Ned Batchelder
    We're seeing some very strange mangling of HTTP responses, and we can't figure out what is doing it. We have an app server handling JSON requests. Occasionally, the response is returned gzipped, but with incorrect headers that prevent the browser from interpreting it correctly. The problem is intermittent, and changes behavior over time. Yesterday morning it seemed to fail 50% of the time, and in fact, seemed tied to one of our two load-balanced servers. Later in the afternoon, it was failing only 20 times out of 1000, and didn't correlate with an app server. The two app servers are running Apache 2.2 with mod_wsgi and a Django app stack. They have identical Apache configs and source trees, and even identical packages installed on Red Hat. There's a hardware load balancer in front, I don't know the make or model. Akamai is also part of the food chain, though we removed Akamai and still had the problem. Here's a good request and response: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Length: 47 < Content-Type: application/x-javascript < Connection: keep-alive < Vary: Accept-Encoding < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 {"msg": "", "status": "OK", "printer_name": ""} And here's a bad one: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Type: application/x-javascript < Content-Encoding: gzip < Content-Length: 59 < Connection: keep-alive < Vary: Accept-Encoding < X-N: S < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 ?V?-NW?RPR?QP*.I,)-???A??????????T??Z? ??/ There are two things to notice about the bad response: It has two Content-Encoding headers, and the browsers seem to use the first. So they see an identity encoding header, and gzipped content, so they can't interpret the response. The bad response has an extra "X-N: S" header. Perhaps if I could find out what intermediary adds "X-N: S" headers to responses, I could track down the culprit...

    Read the article

  • Windows Server 2012 Migration (DNS/AD DS Standard Eval to Essentials OEM) P2V -> Do I need a Secondary Domain Controller during migration?

    - by Aubrey Robertson
    This is my first post on this exchange (although not my first on stack exchange), so please have patience. I am a 3rd year student intern, and I have been tasked with virtualizing the server systems at the company I work for. I have come a long way, and I am almost ready to install the VM Server in migration mode. Here is some information: Source Server: Windows Server 2012 Standard Evaluation DNS Server (local only) Advanced Directory Domain Services File and Storage stuff A few other server roles Destination Server: Windows Server 2012 Essentials OEM (Hyper-V client) Running under a temporary Hyper-V host (will migrate the Hyper-V host back to the old machine after the original server is virtualized as a client). Sitting currently at the "Select Installation Mode" screen. I have been following the guides on Microsoft tech net, and today I spent most of the day getting rid of issues in the Best Practices Analyser on the source machine. I have 3 remaining issues (which are all related): ERROR: DNS: DNS servers on Ethernet (adapter name) should include the loopback address, but not as the first entry (flavour text indicates that, during migration, the DNS server may not be found) WARNING: All domains should have at least two domain controllers for redundancy. WARNING: DNS: Ethernet should be configured to use both a preferred and an alternate DNS Server. All of these issues can be resolved by deploying a secondary domain controller, but I have never done that before (see my concerns below). The main issue here that I am concerned with for installing in migration mode is the FIRST one (the error). If I try and set-up the new server deployment, and the adapter domain controller is listed as localhost, then this may cause the installation to fail. (at least, this is what the Microsoft documentation suggests). But I do not have another IP address to enter here as I have no other local domain controllers. So I did the first obvious thing that came to my mind, and tried to use Google DNS servers as my alternates. That did not work because they couldn't recognize other computers in the "forest". Now I'm no expert when it comes to DNS, so please forgive my ignorance. This DNS server is concerned only with Active Directory stuffs for the local network. If I go ahead with migration, and it fails, then I will just have to go ahead and install a secondary DNS server I suppose. The problem I have here is that I am limited by the amount of Windows Server keys I have available (I have 2); however, I do have access to a Linux box running Debian Wheezy that I set-up two weeks ago as a Mantis server. I could install Windows Server 2012 as a secondary DNS (I think) in a VM and use that, but then it seems like I will be wasting time, and probably the Windows key too, and if there's another way to do it with Linux that would be much better. Even better still, do I even need a secondary DNS server for migration at all? The hints said that during migration the original machine "might" not be found. Thank you for your time and consideration.

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Nginx and multiple wordpress instances with fastcgi under same domain

    - by damnsweet
    My site is running on apache. two instances of wordpress exist under paths /tr/ and /eng/. I want to move the setup to nginx but could not manage to get it working. My setup consists of nging 0.7.66, php 5.3.2, and php-fpm. /tr/ and /eng/ are two separate wordpress instances located under /home/istci/webapps/wordpress_tr and /home/istci/webapps/wordpress respectively. Below is the server section from nginx.conf containing only configuration for tr, yet could not get it working either. server { listen 80; server_name www.example.com; charset utf-8; location ~ ^/$ { rewrite ^(.+)$ http://www.example.com/tr/ permanent; } location ~ /tr/.*php$ { fastcgi_pass unix:/home/istci/var/run/wptr.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/istci/webapps/wordpress_tr$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; } location /tr/ { root /home/istci/webapps/wordpress_tr/; index index.php index.html index.htm; if (!-e $request_filename) { rewrite ^(.+)$ /tr/index.php?q=$1 last; break; } if (-f $request_filename) { expires 30d; break; } } } php-fpm listens on unix:/home/istci/var/run/wptr.sock. running it in debug-mode shows no active handlers, which means no connection is made to unix socket from nginx. nginx access logs: 127.0.0.1 - - [09/Jun/2010:03:45:11 -0500] "GET /tr/ HTTP/1.0" 404 20 "-" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.2.4) Gecko/20100527 Firefox/3.6.4" nginx debug logs : 2010/06/09 03:38:53 [notice] 6922#0: built by gcc 4.1.2 20080704 (Red Hat 4.1.2-48) 2010/06/09 03:38:53 [notice] 6922#0: OS: Linux 2.6.18-164.9.1.el5PAE 2010/06/09 03:38:53 [notice] 6922#0: getrlimit(RLIMIT_NOFILE): 4096:4096 2010/06/09 03:38:53 [notice] 6923#0: start worker processes 2010/06/09 03:38:53 [notice] 6923#0: start worker process 6924 2010/06/09 03:38:53 [notice] 6923#0: start worker process 6925 2010/06/09 03:39:01 [notice] 6925#0: *1 "^(.+)$" matches "/tr/", client: 127.0.0.1, server: www.example.com, request: "GET /tr/ HTTP/1.0", host: "www.example.com" 2010/06/09 03:39:01 [notice] 6925#0: *1 rewritten data: "/tr/index.php", args: "q=/tr/", client: 127.0.0.1, server: www.example.com, request: "GET /tr/ HTTP/1.0", host: "www.example.com" Any clues about what is wrong with my configuration? Thanks.

    Read the article

  • Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

    - by mattalexx
    I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post.

    Read the article

  • Installing chrome in Centos 6.2 (Final)

    - by usjes
    I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

    Read the article

  • /usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

    - by marc.riera
    Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

    Read the article

  • Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

    - by Quanano
    We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

    Read the article

  • Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

    - by LDelgado
    Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

    Read the article

  • Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

    - by froh42
    I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

    Read the article

  • Samba with Active Directory - shares are readonly, NT_STATUS_MEDIA_WRITE_PROTECTED

    - by froh42
    I've set a samba server that seems to work, all shares are seemingly exported as readonly, however. The machine is called "lx". When I'm on lx I can run the following command: froh@lx:~$ smbclient //lx/export -UAdministrator Enter Administrator's password: Domain=[CUSTOMER] OS=[Unix] Server=[Samba 3.5.4] smb: \> mkdir wrzlbrmpf NT_STATUS_MEDIA_WRITE_PROTECTED making remote directory \wrzlbrmpf smb: \> ls . D 0 Fri Dec 3 19:04:20 2010 .. D 0 Sun Nov 28 01:32:37 2010 zork D 0 Fri Dec 3 18:53:33 2010 bar D 0 Sun Nov 28 23:52:43 2010 ork 1 Fri Dec 3 18:53:02 2010 foo 1 Sun Nov 28 23:52:41 2010 gaga D 0 Fri Dec 3 19:04:20 2010 How can I troubleshoot this? What I did: First I set up a fresh install of Ubuntu 10.10 x64. Second I got kerberos working with the following krb5.conf file: [libdefaults] ticket_lifetime = 24000 clock_skew = 300 default_realm = CUSTOMER.LOCAL [realms] CUSTOMER.LOCAL = { kdc = SB4.customer.local:88 admin_server = SB4.customer.local:464 default_domain = CUSTOMER.LOCAL } [domain_realm] .customer.local = CUSTOMER.LOCAL customer.local = CUSTOMER.LOCAL #[login] # krb4_convert = true # krb4_get_tickets = false I also added winbind to group, passwd and shadow in nsswitch.conf. Seemingly Kerberos works: root@lx:~# net ads testjoin Join is OK root@lx:~# wbinfo -a 'Administrator%MYSECRETPASSWORD' plaintext password authentication succeeded challenge/response password authentication succeeded wbinfo -u and wbinfo -g also spit out a list of users and a list of groups respectiveley. I noted that domain accounts did NOT include a domain and they are in german (as on the SBS 2003 that is the domain server). So I get a "Domänenbenutzer" in wbinfo -u's output not a "CUSTOMER+Domain User" or something similar. I'm not sure anymore what I did to the PAM configuration, but here is what I currently have: root@lx:/etc/pam.d# cat samba @include common-auth @include common-account @include common-session-noninteractive root@lx:/etc/pam.d# grep -ve '^#' common-auth auth [success=3 default=ignore] pam_krb5.so minimum_uid=1000 auth [success=2 default=ignore] pam_unix.so nullok_secure try_first_pass auth [success=1 default=ignore] pam_winbind.so krb5_auth krb5_ccache_type=FILE cached_login try_first_pass auth requisite pam_deny.so auth required pam_permit.so root@lx:/etc/pam.d# grep -ve '^#' common-account account [success=2 new_authtok_reqd=done default=ignore] pam_unix.so account [success=1 new_authtok_reqd=done default=ignore] pam_winbind.so account requisite pam_deny.so account required pam_permit.so account required pam_krb5.so minimum_uid=1000 root@lx:/etc/pam.d# grep -ve '^#' common-session-noninteractive session [default=1] pam_permit.so session requisite pam_deny.so session required pam_permit.so session optional pam_krb5.so minimum_uid=1000 session required pam_unix.so session optional pam_winbind.so At some point I joined the linux box into the AD domain. After (manually) creating a home directory on the linux box I can log in using the Adminstrator user with the password taken from AD. Now I run samba with the following setup: [global] netbios name = LX realm = CUSTOMER.LOCAL workgroup = CUSTOMER security = ADS encrypt passwords = yes password server = 192.168.20.244 #IP des Domain Controllers os level = 0 socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = Yes winbind enum groups = Yes preferred master = no winbind separator = + dns proxy = no wins proxy = no # client NTLMv2 auth = Yes log level = 2 logfile = /var/log/samba/log.smbd.%U template homedir = /home/%U template shell = /bin/bash [export] path = /mnt/sdc1/export read only = No public = Yes Currently I don't care whether export is exported to everyone or just one user, I want to see somebody WRITING to that directory before I start fiddling with the authentication settings. (Who may access it). As mentioned, accessing the share from smbclient results in this NT_STATUS_MEDIA_WRITE_PROTECTED . Accessing it from windows shows ACLs that look correct (The user may write) - but it does not work, I can only read files not write. The directory to be exported looks like this: root@lx:/etc/pam.d# ls -ld /mnt/ drwxr-xr-x 5 root root 4096 2010-11-28 01:29 /mnt/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/ drwxr-xr-x 4 froh froh 4096 2010-11-28 01:32 /mnt/sdc1/ root@lx:/etc/pam.d# ls -ld /mnt/sdc1/export/ drwxrwxrwx+ 5 administrator domänen-admins 4096 2010-12-03 19:04 /mnt/sdc1/export/ root@lx:/etc/pam.d# getfacl /mnt/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/ # owner: root # group: root user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/ # owner: froh # group: froh user::rwx group::r-x other::r-x root@lx:/etc/pam.d# getfacl /mnt/sdc1/export/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: mnt/sdc1/export/ # owner: administrator # group: domänen-admins user::rwx group::rwx group:domänen-admins:rwx mask::rwx other::rwx default:user::rwx default:group::rwx default:group:domänen-admins:rwx default:mask::rwx default:other::rwx My, oh my what am I overlooking? What am I to blind to see?

    Read the article

  • Permission Mystery - apt-get and other system utilities have 000 permissions

    - by emteh
    I'm trying to track down this strange behavoir for years now. Always after installing software-updates the permissions of a lot of system-tools are broken as you can see below. I am reasonable convinced that the machine is not owned by someone else. Regular security updates + grsecurity kernel + pax + daily rkhunter runs. Besides that there is no incentive for an attacker to fiddle in such obvious ways with the system. I installed bastille linux (http://bastille-linux.sourceforge.net/) und tried to deinstall it later, so the problems could be related to that. However I don't see how this can happen in a regular way after updates. System: Ubuntu 10.04, recently updated to Ubuntu 12.04 but the problem persists. Apt-Configuration in /etc/apt/ looks sane to me. But nevertheless - could here be the source of the trouble? DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt || true";}; DPkg::Post-Invoke { "if [ -x /usr/bin/debsums ]; then /usr/bin/debsums -- generate=nocheck -sp /var/cache/apt/archives; fi"; }; // Makes sure that rkhunter file properties database is updated // after each remove or install only APT_AUTOGEN is enabled DPkg::Post-Invoke { "if [ -x /usr/bin/rkhunter ] && grep -qiE '^APT_AUTOGEN=.? (true|yes)' /etc/default/rkhunter; then /usr/share/rkhunter/scripts/rkhupd.sh; fi" } DPkg::Post-Invoke {"if [ -d /var/lib/update-notifier ]; then touch /var/lib/update- notifier/dpkg-run-stamp; fi; if [ -e /var/lib/update-notifier/updates-available ]; then echo > /var/lib/update-notifier/updates-available; fi "; }; Where do these chmod 000 come from? I'm feeling really uneasy with this problem. root@besen:~# find /usr/bin/ -perm 0 -ls 14721496 196 ---------- 1 root root 192592 Oct 15 11:58 /usr/bin/apt-get 14721144 68 ---------- 1 root root 63848 Sep 13 00:29 /usr/bin/gpasswd root@besen:~# find /usr/sbin/ -perm 0 -ls 1727732 92 ---------- 1 root root 86984 Sep 13 00:29 /usr/sbin/usermod 1727727 64 ---------- 1 root root 57640 Sep 13 00:29 /usr/sbin/userdel 1727719 64 ---------- 1 root root 57680 Sep 13 00:29 /usr/sbin/newusers 1727718 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/grpunconv 1727728 48 ---------- 1 root root 47088 Sep 13 00:29 /usr/sbin/groupadd 1727724 32 ---------- 1 root root 29584 Sep 13 00:29 /usr/sbin/pwunconv 19031620 84 ---------- 1 root root 81880 Jan 3 2012 /usr/sbin/edquota 14877113 48 ---------- 1 root root 46880 Sep 13 00:29 /usr/sbin/grpck 1727722 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/pwck 1727730 96 ---------- 1 root root 91464 Sep 13 00:29 /usr/sbin/useradd 19031619 16 ---------- 1 root root 14600 Jan 3 2012 /usr/sbin/quotastats 1727720 44 ---------- 1 root root 42760 Sep 13 00:29 /usr/sbin/groupdel 1727733 36 ---------- 1 root root 34504 Sep 13 00:29 /usr/sbin/pwconv 19031621 80 ---------- 1 root root 77632 Jan 3 2012 /usr/sbin/rpc.rquotad 19030041 76 ---------- 1 root root 73600 Jan 3 2012 /usr/sbin/repquota 1727731 40 ---------- 1 root root 38624 Sep 13 00:29 /usr/sbin/grpconv 1727725 56 ---------- 1 root root 49472 Sep 13 00:29 /usr/sbin/vipw 1727723 64 ---------- 1 root root 57672 Sep 13 00:29 /usr/sbin/groupmod root@besen:~# find /sbin/ -perm 0 -ls 16760927 76 ---------- 1 root root 73464 Jan 3 2012 /sbin/quotaon Any tipps? I really can't pinpoint the problem in more detail. It happens after installing updates but I can't find no hooks in the dpkg/apt system.

    Read the article

  • What's wrong with this vcl config for varnish-cache as load balancer?

    - by dabito
    I have the current configurations active on my default.vcl varnish file on the machine that balances the load for other two machines (the other two machines also have varnish active). My intention is to have this server do only the load balancing and the other machines do the processing and also their own caching. My problem is that even with the config testing (not even a stress test or anything, just a few requests a minute) I get the guru meditation error and have to restart varnish. This is the default.vcl for the load balancing server: backend vader { .host = "app1.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } backend malgus { .host = "app2.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } director dooku round-robin { { .backend = vader; } { .backend = malgus; } } sub vcl_recv { if (req.http.host ~ "^balancer.server.com$") { set req.backend = dooku; } } Am I doing something wrong or missing something? EDIT: This is varnishlog's output: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839995 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839998 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840001 1.0 0 Backend_health - malgus Still sick 4--X--- 0 3 5 0.000000 3.846876 0 Backend_health - vader Still sick 4--X--- 0 3 5 0.000000 3.839194 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840004 1.0 14 SessionOpen c 10.150.7.151 38272 :80 14 ReqStart c 10.150.7.151 38272 458200540 14 RxRequest c GET 14 RxURL c / 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c / 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:44 GMT 14 TxHeader c X-Varnish: 458200540 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200540 1345840004.916415691 1345840004.965190172 0.020933390 0.048741817 0.000032663 14 SessionClose c error 14 StatSess c 10.150.7.151 38272 0 1 1 0 1 0 256 418 14 SessionOpen c 10.150.7.151 38273 :80 14 ReqStart c 10.150.7.151 38273 458200541 14 RxRequest c GET 14 RxURL c /favicon.ico 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c Accept: */* 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c /favicon.ico 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:45 GMT 14 TxHeader c X-Varnish: 458200541 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200541 1345840005.226389885 1345840005.226457834 0.000026941 0.000043154 0.000024796 14 SessionClose c error 14 StatSess c 10.150.7.151 38273 0 1 1 0 1 0 256 418

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • iptables 1.4 and passive FTP on custom port

    - by Cracky
    after the upgrade from debian squeeze to wheezy I've got a problem with passive FTP connection. I could narrow it to be iptables related, as I could connect via FTP w/o problems after adding my IP to the iptables ACCEPT rule. Before the upgrade I was able just to do modprobe nf_conntract_ftp ports=21332 and adding iptables -A THRU -p tcp --dport 21332 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT now..it doesn't help anymore. The INPUT rule is being triggered as I can see in the counter, but the directory listing is the last thing it does. Setting up a passive-port range is the last thing I want to do, I dislike open ports. I also tried the trick with helper mod by adding following rule before the actual rule for 21332 iptables -A THRU -p tcp -i eth0 --dport 21332 -m state --state NEW -m helper --helper ftp-21332 -j ACCEPT but it doesn't help and is even not being triggered according to counter. The rule in the next line (w/o helper) is being triggered.. here some info: # iptables --version iptables v1.4.14 # lsmod |grep nf_ nf_nat_ftp 12460 0 nf_nat 18242 1 nf_nat_ftp nf_conntrack_ftp 12605 1 nf_nat_ftp nf_conntrack_ipv4 14078 32 nf_nat nf_defrag_ipv4 12483 1 nf_conntrack_ipv4 nf_conntrack 52720 7 xt_state,nf_conntrack_ipv4,xt_conntrack,nf_conntrack_ftp,nf_nat,nf_nat_ftp,xt_helper # uname -a Linux loki 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux # iptables-save # Generated by iptables-save v1.4.14 on Sun Jun 30 03:54:28 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :BLACKLIST - [0:0] :LOGDROP - [0:0] :SPAM - [0:0] :THRU - [0:0] :WEB - [0:0] :fail2ban-dovecot-pop3imap - [0:0] :fail2ban-pureftpd - [0:0] :fail2ban-ssh - [0:0] -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -p tcp -m multiport --dports 21,21332 -j fail2ban-pureftpd -A INPUT -p tcp -m multiport --dports 22 -j fail2ban-ssh -A INPUT -p tcp -m multiport --dports 110,995,143,993 -j fail2ban-dovecot-pop3imap -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,SYN FIN,SYN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,RST FIN,RST -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags FIN,ACK FIN -j DROP -A INPUT -i eth0 -p tcp -m tcp --tcp-flags ACK,URG URG -j DROP -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -j BLACKLIST -A INPUT -j THRU -A INPUT -j LOGDROP -A OUTPUT -j ACCEPT -A OUTPUT -s 93.223.38.223/32 -j ACCEPT -A BLACKLIST -s 38.113.165.0/24 -j LOGDROP -A BLACKLIST -s 202.177.216.0/24 -j LOGDROP -A BLACKLIST -s 130.117.190.0/24 -j LOGDROP -A BLACKLIST -s 117.79.92.0/24 -j LOGDROP -A BLACKLIST -s 72.47.228.0/24 -j LOGDROP -A BLACKLIST -s 195.200.70.0/24 -j LOGDROP -A BLACKLIST -s 195.200.71.0/24 -j LOGDROP -A LOGDROP -m limit --limit 5/sec -j LOG --log-prefix drop_packet_ --log-level 7 -A LOGDROP -p tcp -m tcp --dport 25 -m limit --limit 2/sec -j LOG --log-prefix spam_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 80 -m limit --limit 2/sec -j LOG --log-prefix web_blacklist --log-level 7 -A LOGDROP -p tcp -m tcp --dport 22 -m limit --limit 2/sec -j LOG --log-prefix ssh_blacklist --log-level 7 -A LOGDROP -j REJECT --reject-with icmp-host-prohibited -A THRU -p icmp -m limit --limit 1/sec -m icmp --icmp-type 8 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 25 -j ACCEPT -A THRU -i eth0 -p udp -m udp --dport 53 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 80 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 110 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 143 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 465 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 585 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 993 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 995 -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 2008 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 10011 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 21332 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A THRU -i eth0 -p tcp -m tcp --dport 30033 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-dovecot-pop3imap -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-pureftpd -j RETURN -A fail2ban-ssh -j RETURN -A fail2ban-ssh -j RETURN COMMIT # Completed on Sun Jun 30 03:54:28 2013 So, as I said, I have no problems with connecting when adding my IP to go through..but that's not a solution as noone except me can connect anymore~ If someone got an idea what the problem is, please help me! Thanks Cracky

    Read the article

< Previous Page | 842 843 844 845 846 847 848 849 850 851 852 853  | Next Page >