Search Results

Search found 26179 results on 1048 pages for 'linux from scratch'.

Page 850/1048 | < Previous Page | 846 847 848 849 850 851 852 853 854 855 856 857  | Next Page >

  • Public IP Routing over Private GRE tunnel

    - by Paul
    I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

    Read the article

  • Disk Redundancy across different server

    - by Mascarpone
    I have 3 servers, all with the same specs: Intel CPU 8 GB RAM Linux or BSD Single 2TB desktop SATA with more than 10K Hours of operation, with only less than 300 GB Used My provider cannot install a second hard drive, but can guarantee me that the drive will be replaced immediately in case of failure, with another equally crappy drive. The likelihood of drive failure is high, and since I can't use RAID, I was thinking about keeping a back up of each machine on all the other machines, so that there are always 2 copies on 2 different drives, plus the original. I would synchronize the drives every hour, with rsync, to guarantee some sort of redundancy, since bandwidth inside the DC is free, so it would be much cheaper than offsite backup. (A daily offiste backup is kept anyhow). What do you think? Any suggestion?

    Read the article

  • wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

    - by Alexandre777
    Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

    Read the article

  • Monitor RAM usage on CentOS and restart Apache at a certain usage

    - by Chris
    Hi, I'm running a CentOS 5.3 server with a basic LAMP stack. I've optimized LAMP and my code to run efficiently as possible, but Apache has a memory leak somewhere that kills my server every hour or so. What is the best way to write a script that will monitor the memory usage and if it peaks over, say, 450MB kill all the Apache processes and restart Apache. I know C++/PHP and basic Linux server administration but I'm not familiar with Perl or bash scripting. I'd be open to learn any solutions, though, as a temporary solution while I find the issue.

    Read the article

  • Importing GPG Key

    - by Bodo
    I have problems importing my GPG-Keys into my new installation of debian. I exportet the private-key a few years ago. Now I am trying to get everything running under a new debian. I tried to do gpg --allow-secret-key-import --import private-key.asc But I only get this: gpg: Keine gültigen OpenPGP-Daten gefunden. gpg: Anzahl insgesamt bearbeiteter Schlüssel: 0 which translates to: gpg: No valid OpenPGP-Data found gpg: Number of processed Keys : 0 The file looks correct and starts with --BEGIN PGP PRIVATE KEY BLOCK----- Version: GnuPG v1.4.9 (GNU/Linux) and ends with -----END PGP PRIVATE KEY BLOCK----- what could be wrong?

    Read the article

  • grep pattern interpretted differently in 2 different systems with same grep version

    - by Lance Woodson
    We manufacture a linux appliance for data centers, and all are running fedora installed from the same kickstart process. There are different hardware versions, some with IDE hard drives and some SCSI, so the filesystems may be at /dev/sdaN or /dev/hdaN. We have a web interface into these appliances that show disk usage, which is generated using "df | grep /dev/*da". This generally works for both hardware versions, giving an output like follows: /dev/sda2 5952284 3507816 2137228 63% / /dev/sda5 67670876 9128796 55049152 15% /data /dev/sda1 101086 11976 83891 13% /boot However, for one machine, we get the following result from that command: Binary file /dev/sda matches It seems that its grepping files matching /dev/*da for an unknown pattern for some reason, only on this box that is seemingly identical in grep version, packages, kernel, and hardware. I switched the grep pattern to be "/dev/.da" and everything works as expected on this troublesome box, but I hate not knowing why this is happening. Anyone have any ideas? Or perhaps some other tests to try?

    Read the article

  • Proxy Appliance

    - by Kumar
    I'm looking for a way to set-up a web proxy at home. Hopefully there's a solution I can use to do this. Alternatively, do you have any ideas for setting up one at home using a proxy with an auto updating list? UPDATE - AutoUpdating list so the new sites are categorized and downloaded and the filtering is done by category instead of per site e.g. peerblock works this way Appliance as in a small dedicated hardware or device to perform this task, like WD TV live or Acer Aspire Revo with the media center edition I'd be ok with setting up Squid / Linux / SquidGuard even if i'm not familiar with *nix but ideally a small form factor pc with dual nic's would be ideal so it can be out of sight for the most part !

    Read the article

  • Redirect users to internal webpage on first visit

    - by Sihan Zheng
    I have a lan of maybe 20 - 30 computers, and a Windows server 2003 server on hand (I can also run any x86 Linux distro). What I am trying to do, is to redirect users to a webserver inside the LAN the first time they visit certain domains. For example, the first time a user visits "google.com", they will be redirected to 192.168.1.2 (a webserver, where they will be shown a custom webpage), attempts after that will go to google. Pretty much what I am trying to do, is to provide a captive server like service, showing people a custom webpage the first time they try to access certain websites (but not others). I'm pretty flexable on how this can be done, as long as it works. Can you guys give me an idea on how to approach this problem? I am looking for (hopefully) a free solutions. Thanks

    Read the article

  • RDMA architecture - do you need adapters on both ends?

    - by Bobb
    I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

    Read the article

  • Error building main Guest Additions Module while installing VirtualBox guest additions

    - by Praveen Sripati
    I have installed Ubuntu 12.10 Guest on Ubuntu 12.04 Host using VirtualBox. Everything is from repository and no direct install. When I install the guest additions, the below error is shown in the console. Before running the command I mapped the VBoxGuestAdditions.iso in the Guest. The closest I could get is this article which says to install the latest version of VirtualBox (not the one from the repository). Is there any alternate solution? sudo ./VBoxLinuxAdditions.run Verifying archive integrity... All good. Uncompressing VirtualBox 4.1.12 Guest Additions for Linux......... VirtualBox Guest Additions installer Removing installed version 4.1.12 of VirtualBox Guest Additions... Removing existing VirtualBox DKMS kernel modules ...done. Removing existing VirtualBox non-DKMS kernel modules ...done. Building the VirtualBox Guest Additions kernel modules The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. Building the main Guest Additions module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Doing non-kernel setup of the Guest Additions ...done. Installing the Window System drivers Warning: unknown version of the X Window System installed. Not installing X Window System drivers. Installing modules ...done. Installing graphics libraries and desktop services components ...done.

    Read the article

  • Amazon EC2 Creating Tunnel with OpenVPN

    - by nocode
    I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

    Read the article

  • Automatically Snapshoting AWS instances (or other back up strategy)

    - by user1172468
    I just realized that my aws instance count has risen into the double digits. I'm currently backing portions of my folders and dbs and moving them off to a backup instance. What I think I should be doing is taking a snapshot of the instances (automatically) and persisting them on S3 so I have a running 7 day collection of daily backups. There is a question asking the same thing here, however the answers don't go into depth. So the closest answer seems to be: use a cron job to snapshot the instance. So do I run the cron job on the instance itself? or do I have a micro instance to run these snapshots? Could I get an example script or the command for say a linux flavor? what software must I have installed to get this to run? Thanks.

    Read the article

  • 3ware RAID in Windows 7

    - by scribbles
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • Write-but-not-delete permissions on SAMBA

    - by m6a-uds
    Hi! I installed samba on my linux server for public file sharing on the LAN. I works great currently, but I would like to add some security: People from LAN should be able to Read files present and Add new ones, but not delete files. I want to keep this privilege for me ;-) How should-I do this? I have set up a "admin" account having full access even to deletion. There is just left to configure the "guest" acount. Google isn't helping that much right now...

    Read the article

  • Parse HTTP requests through Wireshark?

    - by diogobaeder
    Hi, guys, Is there any way to parse HTTP request data in wireshark? For example, can I expose the request parameters upon an HTTP GET request (being sent by my machine), so that I don't need to read the (sometimes) truncated URL and find them by myself? I was using Tamper Data and Firebug, on my Firefox, to analyse these requests, but they're not as reliable as a stand-alone tool for monitoring my network interface, but wireshark keeps data too raw concerning HTTP flow. If you guys know any other stand-alone tool that does this (must be Linux-compatible), please tell me. Thanks!

    Read the article

  • Why does my custom Amazon EC2 AMI have limited instance type options?

    - by John
    The Basic 64-bit Amazon Linux AMI has the following instance type options available: Micro Large Extra-Large High-Memory Extra Large ... etc I booted up this AMI as a micro type, made customizations, shut it down, detached the volume, took a snapshot, and registered my own custom AMI: ec2-register –snapshot [snapshot_id] –description "my description" –name "my name" –kernel aki-427d952b That worked. HOWEVER, when I try to create an instance from my custom AMI, only the following instance types are available: Micro Small High-CPU Medium ... which coincidentally are the same instance types available if you try to boot up the 32-bit Amazon image. Why are the available instance types of my custom image varying from the available instance types of the image I based it off of?

    Read the article

  • Simple recursive DNS resolver for debugging (app or VM)

    - by notpeter
    I have an issue which I believe is caused by incorrect DNS queries (doubled subdomains like _record.host.subdomain.tld.subdomain.tld) when querying for SRV records. So I need to an alternate DNS server with heavy logging so I can see every query (especially stupid ones), acting as a recursive resolver with the ability create records which override real DNS records so I can not only find the records it's (wrongly) looking for, but populate those records as well. I know I could install a DNS server on yet another linux box, but I feel like this is the sort of thing that someone may already setup a simple python script or single use vm just for this purpose.

    Read the article

  • How to install Canon MP610 printer on Ubuntu 12.04 x64

    - by Arkadius
    I installed Ubuntu 12.04 x64. Orginal Canon drivers are only for 32-bit version. How can I install this printer in 64-bit version ? Arkadius HERE IS SOLUTION I looked for solution some time and finally found it. First I try to do it by adding repository like it is written here: http://www.iheartubuntu.com/2012/02/install-canon-printer-for-ubuntu-linux.html BUT it did NOT work. Printer was installed but every print JOB goes somewhere ( probably to /dev/null :) ) Also installing sudo apt-get install ia32-libs did NOT worked (it was already installed) Finally I found solution. NOTE I did NOT use orginal Canon drivers for 32-bit. I also removed drivers from repository: ppa:michael-gruz/canon I found solution almost at the end of this thread: http://ubuntuforums.org/showthread.php?t=1967725&page=10 Most important hint was found in Response #97 "Do NOT install any PPA" I did as follows: Removed all copies of my printer Removed Canon drivers from repository ppa:michael-gruz/canon sudo apt-get remove cnijfilter* Added new repository and installed CUPS for Canon: sudo apt-add-repository ppa:robbiew/cups-bjnp sudo apt-get update sudo apt-get install cups-bjnp Installed Gutenprint: sudo apt-get install printer-driver-gutenprint Restarted CUPS: sudo restart cups Add myself to group lp: sudo usermod -G lp -a your_user_name Added printer usings steps from link above: Don't install any PPA for the drivers. Click the Cog up in the right-hand corner and select Printers. Turn on the printer and make sure it is connected. When the Printers windows appears, click +Add and wait a few minutes. Your printer should appear within the configuration wizard. Mine did and its an Canon MX330. Click the defaults and continue on. Cups should identify your printer. I saw a few other models in the list. I was able to successfully print a test page afterwards. I hope this will also help someone else. Arkadius .

    Read the article

  • PC BluRay - Multichannel HD Audio output

    - by sheepsimulator
    When playing a BluRay movie on a PC (any OS, Mac/Win/Linux), I have some questions about audio output: When playing a BluRay disc on the PC using a BluRay player program, can it decode the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) and output the audio directly to the soundcard's 7.1 line-level analog outputs? Is it possible to bitstream the the multichannel (7.1) LPCM/ Dolby Digital Plus / Dolby TrueHD / DTS-HD / DTS-HDMA soundtracks in their HD formats (ie, without downmixing to Dolby Digital or DTS or PCM) over the HDMI output to a receiver when using a BluRay player program? I'd kinda like to know. I'm contemplating building a home theater PC, and the above functionality is important. I'd prefer that #1 is possible, actually, because it would mean I wouldn't have to buy a receiver.

    Read the article

  • Compose key on Windows

    - by Craig McQueen
    On Linux, the Compose key is a great way to enter many symbols. E.g. m-dash — by pressing Compose then --- ö by pressing Compose then :o Euro € by pressing Compose then C= (The Compose key function can be assigned to various keyboard keys, such as right/left Alt, right/left Windows key.) I really miss the Compose key when using Windows. I've looked but so far haven't found any way to get equivalent Compose key functionality on Windows. Does anyone know of how to do it?

    Read the article

  • Fix corrupt NTFS partition without Windows

    - by Capt.Nemo
    MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

    Read the article

  • I can't run uwsgi as normal user

    - by atomAltera
    I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

    Read the article

  • Windows Deployment Services

    - by timbrigham
    I have a slightly advanced Windows Deployment Services setup. My router hands out DHCP addresses, including the following config. ip dhcp pool Servers_100 network 192.168.100.0 255.255.255.0 bootfile boot\\x86\\pxelinux.0 next-server 192.168.100.50 default-router 192.168.100.1 dns-server 192.168.100.80 192.168.100.81 This works perfectly for other subnets - I have a couple screens in my pxelinux that allow me to select my various Linux installers or enter the windows preboot environment. For some reason I'm only receiving the default bootfile that opens to the windows preboot environment. Any idea why?

    Read the article

  • How to start vim without executing /etc/vimrc?

    - by florin
    On my Linux server at work, the admins did not install cscope, and I installed it from source in my home directory and added it to the $PATH. The trouble is, the /etc/vimrc has a reference to /usr/bin/cscope which does not exist and everytime I start vim, it complains about that and I have to press for that message to go away. It is interesting that if I remove cscope from my $PATH, I don't get that behavior - so it is possible that vim is testing that cscope exists somewhere, and only then executing the cscope configuration - but then it gets it wrong! So my question is: can I set something up in my .vimrc so it does not source the global /etc/vimrc? I don't want to move cscope out of PATH, as I don't want to type the full directory name every time I run it from the command line.

    Read the article

  • Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

    - by Richard Lefebvre
    REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications:   64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments  1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page  13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM  Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or  visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

    Read the article

< Previous Page | 846 847 848 849 850 851 852 853 854 855 856 857  | Next Page >