Search Results

Search found 57907 results on 2317 pages for 'database access'.

Page 864/2317 | < Previous Page | 860 861 862 863 864 865 866 867 868 869 870 871  | Next Page >

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• ESXi and Networking Devices

  - by EsxiUser

  I have two intel pro 1000 pt nics. One quad and one dual port. I want to assign all nic ports to a VM. I enabled PCI passthrough on all devices but ESXi will only allow me to add two nic ports until it tells me the maximum number of pci devices have been added. I have also tried setting up a virtual switch but it didn't seem like this would give full access to the nics. What is the best way to setup the nics to the VM has direct access to them? This is for a firewall VM.

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• Website Upgrade - Avoid Downtime

  - by nolan.sipos

  I have been requested to investigate how I can reduce the downtime of our website upgrades. We maintain a DNN site with both public facing pages and member only pages. The member only pages are directly linked to our core application database while the public pages are not. Our current process is to redirect website users as soon as the upgrade process begins, which includes Backup of the Prod DB Update Prod DB Update Executables (Application) Upgrade Website Application (If this requires an update) Install Dependencies Upgrade sub systems like communication engine and payment broker Update various configuration files Perform testing of systems Restart all services Allow access to site This process can take from 2 to 8 hours depending on upgrade required, scripts to be run, size of database and number or portals. My initial thoughts are to restrict users to read only pages and any update pages would be unavailable. Could anyone please offer suggestions as to the best practices for what I would think to be a common problem so that we can reduce this down time and if we need infrastructure changes, I can put this to our technical department.

  Read the article

• My dedicated server keeps getting very slow that it fails to load the application

  - by server

  I have an application running on Windows Server 2008, running IIS 7.5, SQL Server 2008, 4GB RAM from brinkster. The problem is, every couple of days I get the same 10,000 calls that the system is very slow, and its not operating properly, then after 30 minutes of that it just fails to load. I try to access the server from the remote desktop connection but I can't access it. The only way it I can get it working again is to call the support at brinkster and have them do a manual reboot of the server. After that it works well for some time, and the it re-crashes after some time. Support over there, are not helping a lot.

  Read the article

• setting documentroot in apache

  - by fusion

  i've set the documentroot in httpd.conf as: DocumentRoot "C:\Users\user1\Documents\WebProjects" if the files are located in WebProjects, they work; however if i create a sub folder [project] in WebProjects and access them via the browser, it doesn't load. for example, if i create a folder 'test' in WebProjects and a php file called test.php and call it: localhost/test/test.php . .this won't work and give the error of file not found on server. but if i put all the files in WebProjects itself, ie. test.php in WebProjects, it will work [localhost/test.php]. this makes my WebProjects folder look very cluttered with different files of different projects strewn around. and it isn't practical either. i'm new to using apache and hence would like to know how to set the document root such that i can access and load all the Projects/folders in WebProjects.

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (~2-3k requests per second, running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96

  Read the article

• Options for a site-specific-browser app

  - by cbp

  I would like to have our intranet site accessed through Firefox or Chrome, rather than IE. However we don't want users having access to any other internet sites apart from our intranet, unless they are using IE. I notice that Chrome has what they called 'Hosted Apps' and there is a Firefox spinoff called Prism. Does anyone know whether either of these are suitable? Can you install a Chrome hosted app without giving the user access to other sites through Google Chrome? What about Prism? Are these products stable?

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• Windows Server 2008 - one MAC Address, assign multiple external IP's to VirtualBoxes running as guests on host

  - by Sise

  Couldn't find any help @ google or here. The scenario: Windows Server 2008 Std x64 on i7-975, 12 GB RAM. The server is running in a data centre. One hardware NIC - RealTek PCIe GBE - one MAC Address. The data centre provides us 4 static external IP's. The first is assigned to the host by default of course. I have ordered all 4 IP's, the data centre can assign the available IP's to the physical MAC address of the given NIC only. This means one NIC, one MAC Address, 4 IP's. Everything works fine so far. Now, what I would like to have: Installed VirtualBox with 1-3 guests running, each gets it's own external IP assigned. Each of it should be an standalone Win Server 2008. It looks like the easiest way would be to put the guests into an virtual subnet and routing all data coming to the 2nd till 4th external IP through to this guests using there subnet IP's. I have been through the VirtualBox User Manuel regarding networking. What's not working: I can't use bridged networking without anything else, because the IP's are assigned to the one MAC address only. I can't use NAT networking because it does not allow access from outside or the host to the guest. I do not wanna use port forwarding. Host-only networking itself would not allow internet access, by sharing the default internet connection of the host, internet is granted from the guest to the outside but not from outside or the host to the guest. InternalNetworking is not really an option here. What I have tried is to create an additional MS Loopback adapter for a routed subnet, where the Vbox guests are in, now the idea was to NAT the internet connection to the loopback 'subnet'. But I can't ping the gateway from the guests. By using route command in the command shell or RRAS (static route, NAT) I didn't get there as well. Solutions like the following do work for the one way, but not for the way back: For your situation, it might be best to use the Host-Only adapter for ICS. Go to the preferences of VB itself and select network. There you can change the configuration for the interface. Set the IP address to 192.168.0.1, netmask 255.255.255.0. Disable the DHCP server if it isn't already and that's it. Now the Guest should get an IP from Windows itself and be able to get onto the internet, while you can also access the Host. Slowly I'm pretty stucked with this topic. There is a possibility I've just overlooked something or just didn't getting it by trying, especially using RRAS, but it's kinda hard to find useful howto's or something in the web. Thanks in advance! Best regards, Simon

  Read the article

• RSync over SSH - permission denied even though the user is in the root group

  - by Bastien974

  I have a need to copy files between servers through the web. I'm using RSYNC over ssh to do so. The problem is, I need to be able to transfer files, no matter where the files is. I created a user rsync and : usermod -G root -a rsync to give him the right to read/write anywhere on both servers. During the transfer, I see this error: rsync: mkstemp "/root/.myFile.RDr2HY" failed: Permission denied (13) I don't understand what's happening. edit: I just found out that the destination folder didn't have the write access for the root group. How would I give 100% access to this rsync user ? If I change its uid to 0, rsync stop working.

  Read the article

• What changes can be made to a Microsoft Account using net user on Windows 8?

  - by nhinkle

  In Windows 8, you can log on with a local account or with a Microsoft Account. Both types show up in the Users control panel, but there are different options that you can change for each type. An administrator can change basically any aspect of a local user - name, password, access level, etc. For a Microsoft Account, you can only change the access level (admin/standard) or remove the account. From the command line though, there don't appear to be any restrictions on what you can do a Microsoft Account. Using the net user tool or the Local Users and Groups MMC snap-in, it looks like an administrator would be able to change the password, display name, profile path, etc. of Microsoft Accounts (as well as local accounts of course). Will these commands actually work when applied to a Microsoft Account? Will using them in some way break the link to the Microsoft Account, or will nothing happen at all? I'm hesitant to test since I don't want to mess up my account permanently.

  Read the article

• Clone remote CentOS server to local test server?

  - by dannymcc

  We have a dedicated server running ContOS 5.5. The server runs our Magento store and a basic php website with mysql. I have a spare rack server in my office (HP ProLiant DL360 G4) that has more than enough storage space to store a duplicate of our dedicated server. I would like to clone the dedicated server entirely and have a local duplicate. It wouldn't need to be kept in sync because I can do that with GIT. The reason I want to do this is simple; learn more about the dedicated server and CentOS. Is this possible? I have SSH access to the dedicated server and obviously complete access to the local server.

  Read the article

• Apache gives empty reply

  - by Jorge Bernal

  It happens randomly, and only on moodle installations. Apache don't add a line in the logs when this happens, and I don't know where to look. koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 curl: (52) Empty reply from server koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 HTTP/1.1 200 OK The apache conf is quite straightforward and works perfectly in the other vhosts <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /srv/apache/training.ebox-technologies.com/htdocs ServerName training.eboxhq.com ErrorLog /var/log/apache2/training.ebox-technologies.com-error.log CustomLog /var/log/apache2/training.ebox-technologies.com-access.log combined <FilesMatch "\.(ico|gif|jpe?g|png|js|css)$"> ExpiresActive On ExpiresDefault "access plus 1 week" Header add Cache-Control public </FilesMatch> </VirtualHost> Using apache 2.2.9 php 5.2.6 and moodle 1.9.5+ (Build: 20090722) Any ideas welcome :)

  Read the article

• VPN only connects to its server!

  - by Eddie

  Hi guys; Previously I bought a windows 2003 VPS and enabled routing and remote access so that users can make a vpn connection. I turend the firewall off and everything was working fine. But since 2 days ago whenever I try and connect to vpn it connects to vpn without any problem and I can see the connection status however it only connects to the server I mean what I can do with this vpn is to connect to the server via remote desktop and I can ping only the server's IP, neither I can open any webpages in browsers or ping other IP addresses beside the server one! I've also rebuilt the server and configured it for routing access and vpn connection from the beginning but it doesn't work either. It seems that server fails to route the traffic properly, as i'm sure that the firewall has been turned off I can't figure out what's the reason, any idea what's going on? Thanks in advance

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

  - by linni

  I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

  Read the article

• SQL log shipping for reporting

  - by Patrick J Collins

  I would like to create a read-only copy of my SQL Server 2008 database on a secondary server for reporting and analysis. I've been testing log shipping, configured to run every 5 minutes or so. Alas, there appears to be a stumbling block, for exclusive access is required on the target database during the restore, which in turn requires killing all active connections. This is far from ideal, especially if a user is in the middle of running a report. Any better suggestions? Edit : I'm doing this on the Express edition.

  Read the article

• Configure static IP with port number which will point to multiple projects on different ports

  - by Yogesh Kadam

  I am developing a project in LAM* and using the Symfony framework. I have one static IP like 99.99.99.99:8000 which points on my Linux server machine. This static IP already has port number of 8000. This Linux server machine has multiple project hosted on it and we access each project in LAN with different port number like abc:81, pqr:82, xyz:83. Is is possible to access each project on same Linux machine by this static IP? If yes then please let me know how to configure and call each project using this IP address.

  Read the article

• Forward the Wan IP to another Wan IP without change the Source address

  - by user195410

  I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) ----My iptables rules--------- iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

  Read the article

• Iomega Home Media Network Hard Drive: Accesing the data in the disk?

  - by JJarava

  Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

  Read the article

• Internet Connection Sharing/FTP issues

  - by SirSkidmore

  I am currently using a Linux Mint desktop along with a Windows 8 netbook running Internet Connection Sharing to my desktop. On my desktop, I can't access FTP sites, but my laptop can, so I think it might be a porting issue. I can ping the server from Mint, so I know it's up and running, but I can't access it via telnet. On my Windows 8 netbook, I have every protocol checked, including FTP. Originally, the FTP server indicated that "Scotty" (my netbook) was hosting the service, so I tried inputting the IP of my router, 192.168.1.1 to no avail. Any ideas?

  Read the article

• Trying to mount NFS share on Windows Machien at startup with Z: letter for all users

  - by ScottC

  Windows Server 2008 We are trying to mount a specific drive letter on a windows machine from a unix machine. We need the mount to be available to the server even if no users are logged in and to users who are logged in with If we run the command from the command prompt manually it conencts and we have access to the NFS share, and can open it and see and edit files. mount -o fileaccess=777 anon \\127.0.0.1\nav z: (ip address replaced with 127.0.0.1 for security reasons) However if we try to automate the task by making an entry in the task schedule for boot time, to execute the batch script, it adds a disconencted drive to the list in 'My Computer' but it is disconencted and when trying to access the drive an error is produced: Z: is not accessible The data area passed to a system call is too small.| Tried as administrator with highest privelidges, as SYSTEM (group) and as my user (adminstator level user) same results. Is there another way to do this? Most of the help I have found online suggest this way but it keeps failing.

  Read the article

• What ssh command would I use to set up "backwards listening"

  - by Nathan

  Machine A is behind a firewall. I have physical access to it, but I want to log into it remotely, and I do not have access to the firewall settings. Machine B is remote, and not behind any firewall. (It's my linode) Machine C is the mobile device I'm going to attempt to ssh into A from. Is there an ssh command that I can run from machine A that connects to machine B and stays open, that will allow me to log into A from C, via B? From the manual I'd guess it would be to run the follwing on A ssh -R *:9999:localhost:22 me@B and then run this on C ssh me@B -p 9999 but the previous command reports "Connection refused."

  Read the article

< Previous Page | 860 861 862 863 864 865 866 867 868 869 870 871  | Next Page >