Search Results

Search found 58734 results on 2350 pages for 'windows batch'.

Page 864/2350 | < Previous Page | 860 861 862 863 864 865 866 867 868 869 870 871  | Next Page >

• spoolsv.exe consumes all CPU and RAM resources

  - by pcampbell

  Consider a Windows 7 x64 installation with 2 printers installed. The system has 8GB installed RAM. One printer is a Brother laser MFC-8220 Printer via TCP/IP, and the other is a CutePDF printer. Problem: the spoolsv.exe regularly eats obscene amount of memory and CPU when the machine is idle. Usually the device is powered off. Turning it on has no effect on the RAM or CPU usage. The first consideration was that perhaps a print job has previously been sent to the Brother, but the queues are empty, and no jobs are waiting. These screenshots do not show, but regularly the spoolsv service will consume all 8GB and climb to use 95-100% of the CPU. The two printers - a Brother and the CutePDF printer both have 0 documents in their respective queues. Question: what measures can I take to ensure the spoolsv.exe doesn't consume inappropriate amounts of CPU and RAM?

  Read the article

• How to quickly empty a very full recycle bin?

  - by Pekka

  I have deleted about half a million files from a folder, and didn't think to press Shift in order to delete them completely straight away. Now they're clogging my recycle bin, and Windows claims it will take 4 hours to empty it - it claims to do about 68 files per second. Is there some magic or an alternative method that can speed this up? Bounty - I'm starting a bounty. The files are still in my bin, as there was no pressing need to get rid of them and this way, I can try out the suggestions presented. I am, however, looking for a way that does not include hard-deleting the contents of the RECYCLER folder - I'm sure that would work, but it feels a bit unclean to me.

  Read the article

• How can I regain control over a "stuck" scrollbar?

  - by jonsca

  I fear that this is one of those "for your own good" features, but I'm wondering whether or not there is a setting in Firefox or Chrome (or perhaps Windows in general) that will allow me to recapture the scroll bar even though the browser may be busy. I run into this a lot, especially when I have a lot of tabs open in either browser, and so perhaps it's just a fact of life. I wouldn't mind being able to scroll along gradually, even if the page hasn't had time to fully render all of the images, etc., yet. Does such an advanced setting exist "under the hood"?

  Read the article

• Aspect Ratio on Nero 9 for burning DVD

  - by Tara

  I am currently attempting to burn a screen capture file to DVD. I will admit that I know very little about the process, the terminology, and am at a loss of how to find this information. I am using Nero 9 and am very displeased that the manuals available to me online explain very little. My current problem is that when I burn to DVD, my beautiful screen capture ends up being cropped. Through endless amounts of googling I am under the impression that this is due to aspect ratio. However, as windows will not tell me the resolution size for me to determine the correct aspect ratio I do not know how to proceed. Is there a way using Nero 9 for me to be able to burn my screen capture to DVD? Any advice or suggestions are appreciated.

  Read the article

• Lack of Virtual Memory - confusion

  - by Wesley

  Specs ahead of time: AMD Athlon XP 2400+ @ 2.00 GHz / 1 GB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / 350W PSU / Windows XP Pro SP3 So, XP has pop-ups saying that I am low on virtual memory. However, I have a program called SmartRAM (part of Advanced SystemCare by IObit) and it displays CPU & Page File Usage and Free Physical and Virtual Memory. That program shows that I have at least 2000 MB free virtual memory on my machine when the XP pop-ups say that I'm low on virtual memory. First off, would a complete lack of virtual memory cause my computer to freeze? Secondly, how can I solve this lack of virtual memory? (A complete reformat is possible but can't be done immediately...) Thanks in advance.

  Read the article

• Change audio output depending on which one is on

  - by pkrish

  I have a PC that is hooked up to my HDTV (via a long hdmi cable) and to a monitor, which is in another room. I have speakers directly plugged to the PC audio out. The PC is next to the monitor and speakers. I am not sure but I think Windows can play sound on only 1 audio device at a time. And I can only set 1 device as the default output. I can get sound on the TV or speaker depending on which device I set to default. But I would have to do this every time I switch between using my TV or my monitor! Is there some way to configure such that sound plays through the TV if the TV is on, else it plays in the speakers? If this is not possible, then the next best alternative would be to get the sound to play on both the devices at the same time. Thanks!

  Read the article

• Blinking cursor after repair install on Win XP

  - by Nathan

  I have an Asus Eee PC netbook which I upgraded the drive of. After some shenanigans, I was able to do a repair install from my Windows XP CD. However, I still have a blinking cursor in the upper-left-hand corner after POST. I tried going into the recovery console and doing chkdsk/fixboot/fixmbr with no effect. Any suggestions would be appreciated! (Sorry if it's inappropriate to post a followup as a new question; I'm not sure how I should do it in a way that will cause it to actually be seen). Thanks, Nathan

  Read the article

• Acer Aspire 7739G-6647 won't connect to the internet

  - by Nux

  Acer Aspire 7739G-6647, it belongs to a family member. I reinstalled the chipset, LAN drivers, ethernet controllers, etc. I'm positive it's not my router or modem or anything like that. I have other laptops running on the network, this one just has some strange issue. For some reason, it's saying "Work Offline" is enabled when I open Windows Media Player, and the PC seems to be connected to the network, but on the graphic in networking, it doesn't show the connection between the network and the internet. Could anyone try to state any possible reason for this issue? Any help is appreciated.

  Read the article

• Local network cache of PHP and Apache2 on Win Server 2008 R2

  - by Ahmed Benlahsen

  Software configuration : I have a new server with Windows Server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separate packages. Issue : On my first installation of my application, all works great. When I updated some JS and CSS files and accessed my application again from a PC on local network, I got the old JS and CSS versions. When I access the same application on local server I got the latest versions of those files. Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I think that must be some cache but I don't know where. Maybe on Win Server 2008 R2 or on VMWare? The question is: Why, when I access my application on the server, everything works fine, but when I access the same application from a local network, I do not see the updated versions of JS and CSS files?

  Read the article

• ASUS P6X58D and 12 GB of RAM

  - by Hunter

  I just assembled my new PC and it screams, BUT it's only recognizing 8 GB of RAM in BIOS and OS rather than the installed 12 GB. In the BIOS the RAM was registering at 1066 MHz so I set it to 1600 MHz. I updated the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS: Windows 7 Ultimate 64-bit Motherboard: ASUS P6X58D Premium CPU: Intel Core i7 920 RAM: CORSAIR XMS3 12 GB (6 x 2 GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD: Intel 80 GB SSD SATA II Power supply: Kingwin 1000 W Modular I've installed the Beta BIOS 0808 but no luck!

  Read the article

• How do I get my laptop's screen brightness settings back?

  - by Mason Wheeler

  From when I bought it up until yesterday, my laptop would dim the screen automatically if you let it sit for long enough, and then if you hit a key or moved the mouse, the brightness would jump back to what you had it at. I enjoy that behavior. It works well. Then I booted it up today, and found that now it will dim the screen automatically if you let it sit for long enough, but it doesn't restore the screen brightness. I have to do that manually, every single time, and it's getting really old really fast. It's an Alienware M17 running Windows 7 64-bit, in case that helps.

  Read the article

• Bitlocker-to-go on fixed drive

  - by Unsigned

  Scenario Two drives are connected to a computer. One via a SATA-to-USB interface, the other directly via a SATA-to-eSATA cable. The drive on USB appears as a removable drive, the drive on eSATA appears as a fixed drive. Both use NTFS. The USB drive offers Bitlocker-To-Go, the eSATA drive only offers BitLocker. Question It is my understanding that drives encrypted with BitLocker-To-Go include an app to allow Windows XP read-only access to the volume. Is this the only difference, and is there a way to use Bitlocker-To-Go on the eSATA drive? Update Another difference is found here: The recovery key is required when a BitLocker-protected fixed data drive configured for automatic unlocking is moved to another computer.[1] Assuming that does not apply to removable drives.

  Read the article

• What happens to modern-ui apps when they aren't in the foreground?

  - by Mark Allen

  If I start a modern-ui app and then switch to a different app or a normal program running on the desktop, what happens to the first app? I've heard something about the first app being suspended, but realized that I don't really know that for certain. I mean, could you write a SETI@Home (BOINC) app if you wanted to, or will apps that aren't in the foreground always be suspended? Can you change that? I could see changing that based on available resources, running from AC vs. battery, etc. This morning I heard about an iPad being recovered thanks to the "Find my iPad" app, and was wondering whether you could write such a thing as a modern-ui app and have it work without being the running foreground app. (I'm aware that you'd just write a Windows service or similar, that's not what I'm asking about.)

  Read the article

• Is there any desktop version available for wsywyg editors

  - by user825904

  I have been searching for long and i am not able to find one editor which i can always keep open for daily notes keeping with some codes and which highlights the code Just like we have our editor where we ask questions. ALl is want is I can write some text as normal Then i have few php code which i can write and then click some code button or like we have ctrl +K and i gets higlighted then on the same page i write some paragraph text as normal withoout higligting and some bullet points Then again i get some c++ code and i wrap that around on the same page and page grows daily Currently i use notepad++ and it does not support syntx higlighting of different langages on same page and on individual blocks. it highights all the file even the normal text as well basically i am looking wsywyg editor but as windows desktop application

  Read the article

• Xcopy /exclude does not exclude some of the specified criteria

  - by Richard Z.

  Good afternoon. I want xcopy to copy all files meeting a certain criteria located in the C drive to a specific folder, except ones located in the directories specified in excl.txt. The exclusions only work partially - the files located in %systemroot%, %programfiles% and in each profile's appdata are still copied, even though those directories are listed in excl.txt. How do I make xcopy skip those directories, preferentially still using environment vars to specify the paths? My current syntax is: xcopy /s /c /d /h /i /r /y /g /f /EXCLUDE:excl.txt %systemdrive%\*.doc f:\test\ excl.txt currently contains the following: \%temp%\ \%userprofile%\appdata \%programfiles%\ \%programfiles(x86)%\ \%systemroot%\ \%programdata%\ appdata windows %programfiles% Thank you very much.

  Read the article

• Downloads on Vista Home Premium start off fast but slow down to 0 Kb/s and hang

  - by user66265

  I have Windows Vista Home Premium on my computer and everytime I go to download something, it starts out at about 1.5 Mb/s and stays there for about 3 seconds, then it slows down to 800 Kb/s and continues to drop until it gets down to 0 Kb/s and hangs. I've tried just about everything I can find such as uninstalling all firewalls/antivirus, doing the netsh rss,autotune, and chimney disable, and updating everything but it still continues to happen. I'd prefer not to reinstall but if I have to then I have to... EDIT: Figured it out, the router needed a firmware update

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

• Msys cd .. command takes me to home directory instead of parent

  - by Adrian

  I'm using Msys on Windows 7 with what I believe to be a Bash shell. I want to navigate the following directory structure: Drive (M:) +--- Coding +--- CPP +--- projects +--- other_folder_1 +--- other_folder_2 My fstab file contains the following line: M:/Coding/CPP/projects/ /home/Adrian/ ... which makes the projects folder my starting directory when opening the shell. Unfortunately when I try to cd .. out of projects, I end up in /home instead of CPP. I imagine this might be related to what I did in the fstab file. Is there any way for me to retain the projects folder as my starting directory while being able to cd into its parent directories?

  Read the article

• HP Recovery Manager failed creating a backup disc

  - by Baehr

  I had to restore my computer (running Windows 7) back to its factory default, so I ran the HP recovery manager disc and chose to reformat my computer. Before doing this I was given an option to backup my current files to a DVD, and I did so; getting the confirmation of a successful DVD burn. Booting up my computer everything looks like it did when I first purchased it (like expected). But when I pop in the backup DVD and run the recovery EXE inside it, the application creates a directory inside C:\System Recovery Files which contains the empty directories: [(^_^)] and Program Data. So essentially what I'm getting out of this is a failure in creating a back-up. Which is not only confusing but incredibly frusterating. Is there any way that I can recover the files lost in the

  Read the article

• Driver to split audio to 2 different devices?

  - by ThantiK

  I recently bought one of these USB headsets against my own better judgement, and it's really costing my sanity at this point. Previously when using a standard jack, I just used a splitter so I could split off the things I was doing with my TV or headset, I could just turn the TV off or the headset volume down should I want to use one at a time. Now, along comes this USB headset and I find that I can't choose for the sound of 1 application to pipe to 2 different devices on Windows; How can I solve this? Does any software out there exist for this purpose?

  Read the article

• Performance problem with Win Server 2008 at vbox on Ubuntu 9.10 Server

  - by Diskilla

  Hey, i´ve got an Ubuntu 9.10 Server and tried to install Windows Server 2008 in a virtual machine. The Problem is, the Server has got 8 cores, but the virtual machine seems to have problems with that. The VM is very slow and not really usable if i set the VM-config to more than one core. Is it set to only one core everything works fine, but thats not a solution because I bought the Server with several cores for a reason... Does anybody know this problem or has got a solution? I feel like I read the entire internet via Google... no solution found. Greetz Diskilla P.S.: I´m from Germany and it´s kind of hard to ask in english :-) I hope I din´t make that much mistakes.

  Read the article

• HP OfficeJet 5600 w/ Dlink DPR1260 not printing except from Notepad

  - by joelarson

  I have an OfficeJet5600 attached to a Dlink DPR1260 wireless print router. It has worked great for a long time. Today we had a power outage and the thing was inaccessible. I reset the DPR1260 and reinstalled drivers and soforth. I can now print from Notepad, but not from any Office programs, IE, or Chrome. I have toggled on and off many settings such as spooling/not spooling, etc. Nothing has helped. Any ideas? I have Windows Vista.

  Read the article

• cloning mac address of physical server converted into vmware server

  - by user24981

  We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

  Read the article

• IE "About:Tab" page hijacked

  - by tcv

  Hey folks, Client o' mine, running Windows 7 64-bit, installed Kiwee Toolbar and then uninstalled it. The software is pretty much gone except for one last thing: The About:Tab IE page redirects to a Kiwee search page. I have temporarily disabled the "New Tab" page via Internet Explorer's options, but it annoys me. I have scanned with multiple tools. Spyware Doctor purports to removed it, but they want money to remove it. I would buy it -if- I could be certain it would fix the problem. I've also searched the registry and the filesystem for instances of the program, plus I've removed Kiwee manually via the many manual uninstalls out there. IE's AboutURLs registry entry still points to res://ieframe.dll/tabswelcome.htm and if I enter that URL into IE, the correct New Tab page comes up. Any help appreciated.

  Read the article

• mplayer dumpstream sometimes fails

  - by User1

  I'm trying to rip the video at http://videolectures.net/ecml07%5Fgetoor%5Fisr/, so I can play it at a faster speed. I paste http://193.2.4.216/2007/pascal/ecml07%5Fwarsaw/getoor%5Flise/ecml07%5Fgetoor%5Fisr%5F01.wmv into a firefox browser in Windows and MediaPlayer plays the thing. However if I try mplayer -dumpstream, it gets stuck into an infinite loop trying to play the file. If I use wget to download the link, I get a small text file which basically points to the same URL. How can I get mplayer to download this stream?

  Read the article

< Previous Page | 860 861 862 863 864 865 866 867 868 869 870 871  | Next Page >