Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 873/1173 | < Previous Page | 869 870 871 872 873 874 875 876 877 878 879 880  | Next Page >

• pfSense Load Balancer and Virtual IP

  - by jshin47

  I have two identical web servers on 10.2.1.13 and 10.2.1.113. I would like to set up pfSense load balancer to balance requests to both of these. I set up pools that included HTTP and HTTPS for both of these hosts, then set up virtual servers that responded on HTTP and HTTPS and referred traffic to its respective pool. However, I set up the virtual server to listen on 10.2.1.213, a LAN IP rather than a WAN IP, because I want LAN traffic to be able use the load balancer virtual server as well. So, I set up a Virtual IP for 10.2.1.213 on LAN IP, and a NAT port forwarding rule for HTTP and HTTPS traffic on a WAN IP to forward to 10.2.1.213. It seems like this should work, but it fails. What eventually happens is that when I try to access the page from WAN, I am directed to the login page for my pfSense device rather than the page I am expecting. When I try to access 10.2.1.213 from LAN, the request times out. What is going wrong here? I have tried it with and without NAT reflection to no avail. Please advise

  Read the article

• Disabling Keyboard Wakeup for Ubuntu 10.04 on Acer 1810TZ

  - by sybreon

  My Acer Aspire 1810TZ laptop suspends fine but wakes up on any slight key-press. I would like to disable this behaviour. I read that it involves disabling something in the /proc/acpi/wakeup but SLPB does not seem to be listed at all. root@1810TZ:/etc# cat /proc/acpi/wakeup Device S-state Status Sysfs node UHC0 S3 disabled pci:0000:00:1d.0 UHC1 S3 disabled pci:0000:00:1d.1 UHC2 S3 disabled pci:0000:00:1d.2 UHCR S3 disabled EHC1 S3 disabled pci:0000:00:1d.7 UHC3 S3 disabled pci:0000:00:1a.0 UHC4 S3 disabled UHC5 S3 disabled EHC2 S3 disabled pci:0000:00:1a.7 EXP1 S4 disabled pci:0000:00:1c.0 PXSX S4 disabled pci:0000:01:00.0 EXP2 S4 disabled PXSX S4 disabled EXP3 S4 disabled PXSX S4 disabled EXP4 S4 disabled pci:0000:00:1c.3 PXSX S4 disabled pci:0000:02:00.0 EXP5 S4 disabled PXSX S4 disabled EXP6 S4 disabled PXSX S4 disabled However, the relevant bits seem to be detected from dmesg. [ 0.357628] ACPI: AC Adapter [ACAD] (on-line) [ 0.357749] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.357754] ACPI: Power Button [PWRB] [ 0.357817] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.359319] ACPI: Lid Switch [LID0] [ 0.359390] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.359394] ACPI: Sleep Button [SLPB] [ 0.359475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.359479] ACPI: Power Button [PWRF] Not quite sure what to do next.

  Read the article

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• 530 5.7.1 Client was not authenticated Exchange 2010 for some computers within mask

  - by user1636309

  We have a classic problem with Client not Authenticated but with a specific twist: We have an Exchange 2010 cluster, let's say EX01 and EX02, the connection is always to smtp.acme.com, then it is switched through load balancer. We have an application server, call it APP01 There are clients connected to the APP01. There is a need for anonymous mail relay from both clients and APP01. The Anonymous Users setting of the Exchange is DISABLED, but the specific computers - APP01 and clients by the mask, let's say, 192.168.2.* - are enabled. For internal relay, a "Send Connector" is created, and then the above IP addresses are added for the connector to allow computers, servers, or any other device such as a copy machine to use the exchange server to relay email to recipients. The problem is that the relay works for APP01 and some clients, but not others (we get "Client not Authenticated") - all inside the same network and the same mask. This is basically what we do to test it outside of our application: http://smtp25.blogspot.sk/2009/04/530-571-client-was-not-authenticated.html So, I am looking for ideas: What can be the reason for such a strange behaviour? Where I can see the trace of what's going on at the Exchange side?

  Read the article

• Loss of network connectivity when playing video on Optoma HD180 projector

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

  Read the article

• Converting software RAID1 to RAID10 for /boot

  - by luckytaxi

  Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10. The problem I'm having is adding the last drive to the array. I've gotten as far as creating a RAID10 with two missing devices but as soon as I add the last drive, all hell breaks loose. It seems /dev/sda1 is the culprit. What I'm not too sure about is how to create the RAID10. I've tried the following mdadm --create /dev/md2 --level=raid10 --raid-device=4 /dev/sdc1 missing /dev/sdd1 missing I then proceeded to fail /dev/sdb1 from /dev/md0 and added that partition to /dev/md2. I proceeded to install the MBR on EACH partition since boot resides on /dev/sdx1 on each drive. As a test, all is well, I'm able to boot back into the system once I do a quick reboot. Now, when I go add the last drive /dev/sda1, it breaks. I attempted to install grub on /dev/sda1 and I get the following ... grub> root (hd0,0) /dev/sda root (hd0,0) /dev/sda Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type At this point, the array is hosed I believe. I rebooted the server and it refuses to boot.

  Read the article

• Creating an ec2 image on amazon fails at mkfs.ext3

  - by Dave Orr

  I'm trying to create an image of my ec2 instance in Amazon's cloud. It's been a bit of an adventure so far. I did manage to install Amazon's ec2-api-tools, which was harder than it seemed like it should have been. Then I ran: ec2-bundle-vol -d /mnt -k pk-{key}.pem -c cert-{cert}.pem -u {uid} -s 1536 Which returned: Copying / into the image file /mnt/image... Excluding: /sys/kernel/debug /sys/kernel/security /sys /proc /dev/pts /dev /dev /media /mnt /proc /sys /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/z25_persistent-net.rules /mnt/image /mnt/img-mnt 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00677357 s, 155 MB/s mkfs.ext3: option requires an argument -- 'L' Usage: mkfs.ext3 [-c|-l filename] [-b block-size] [-f fragment-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G meta group size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-T fs-type] [-U UUID] [-jnqvFKSV] device [blocks-count] ERROR: execution failed: "mkfs.ext3 -F /mnt/image -U 1c001580-9118-4a50-9a25-dcf02be6d25f -L " So mkfs.ext3 wants -L, which is a volume name. But ec2-bundle-vol doesn't seem to take in a volume name as an argument, and the docs (http://docs.amazonwebservices.com/AmazonEC2/gsg/2006-06-26/creating-an-image.html) don't seem to think one should be needed. Certainly their sample command: # ec2-bundle-vol -d /mnt -k ~root/pk-HKZYKTAIG2ECMXYIBH3HXV4ZBZQ55CLO.pem -u 495219933132 -s 1536 doesn't specify anything. So... any help? What am I missing?

  Read the article

• CloneZilla Broke My System? Ubunut Installation Lost After Running CloneZilla

  - by nicorellius

  I just read through this post and tried to get my installation back using this answer to no avail. What happened to me is this: I spent an hour or more reading through the CloneZilla docs. I thought I was ready to test it out so I burned the disc with the ISO image on it and ran it. The system I used was Ubuntu 10.04, 32-bit. Everything seemed to go fine. I made a clone of my first partition and copied it to my second partition. I followed the instructions, removed the disc and rebooted my system. At this point, I would expect to have two bootable Linux installations, identical to one another. However, upon booting, I got this error message: error: no such device: 4cf1a6ef-xxxx-xxxx-xxxx-4e3a3ce92bcd error: file not found I booted from a Live Ubuntu disc and was able to see my to partitions: 4cf1(1) and 4cf1(2) (abbreviated, because the volumes have long numbers to identify them). The 50 GB partition, on which the original Ubuntu installation sits is the number and the second partition (175 GB) is the same number with an "_" at the end. I could browse the disc partitions and see the files, but I'm not sure what to do next. I know there is a way to restore my grub loader and actually boot either of these installations, but my Linux know-how is limited. Can I edit the boot loader file to fix this problem? The only clue I have is CloneZilla said something about making a new GRUB but I thought it was going to basically modify it so I could boot either installation. Not sure what happened. I am going to look through this post for the time being to see if I can learn anything to help my problem. But I thought that, since this happened as a result of using CloneZilla, it may be a unique question for this board.

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

• How do I stop panning on a monitor that supports a specific resolution?

  - by IronicMuffin

  Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

  Read the article

• Iptables QUEUE Target and Snort

  - by bradlis7

  I'm trying to set up a firewall with support for snort, and it is dropping all of my packets when I add the QUEUE target. I've made it like this, but the QUEUE target is not allowing the packets to be processed any further: -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -j QUEUE -A INPUT -j ACCEPT # It's not allowing anything past QUEUE, as you can see below in the count. > iptables -I INPUT -nv pkts bytes target prot opt in out source destination 6707 395K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 933 138K QUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 I'm eventually going to change it to forward, but I'm just trying to get it working for now. I start snort like so: snort -Q -D -c /etc/snort/snort.conf EDIT: More Information When I run it, it still sees the packets without having an iptables QUEUE target rule, but when I add a QUEUE target, it starts losing all of my packets. # snort -Qc /etc/snort/snort.conf -N -A console Enabling inline operation Running in IDS mode --== Initializing Snort ==-- Initializing Output Plugins! Initializing Preprocessors! Initializing Plug-ins! Parsing Rules file "/etc/snort/snort.conf" ## === CUT === *** *** interface device lookup found: bond0 *** Initializing Network Interface bond0 Decoding Ethernet on interface bond0 ## === CUT === Not Using PCAP_FRAMES So, it says inline, but the it says it's using bond0. Inline should not require an interface, right?

  Read the article

• What is the best way to create a failover cluster for my IIS website?

  - by ObligatoryMoniker

  Our eCommerce website www.tervis.com currently runs on two servers: SQL server: 2005 x 86 on Windows Server 2003 Standard x86 with a single dual core processor and 4 gb of memeory IIS server: Windows Server 2008 Web edition x64 with dual quad core hyper threaded processors and 32 gb of memory Tervis.com's revenue has steadily grown to the point where we need to have redundant servers deployed with a fail over mechanism so that we do not have any down time. Because the SQL server is so underpowered compared to the web server my thought was to purchase: 2 x SQL Server 2008 R2 web edition x64 single processor license 2 x Windows Server 2008 R2 Web Edition Licenses 1 x New Physical dual quad core 32 GB server 1 x F5 Load Balancer I need the Windows Server 2008 R2 Web Edition licenses so that I can run SQL and IIS on the same box for both of these servers. The thought is to run this as an active/passive fail over cluster that could be upgraded to an active/active cluster if we purchased the additional SQL licensing. The F5 load balancer would serve as the device that monitors the two servers and if the current active one stops responding then fails over to using the other server. To be clear this is not windows clustering but simply using a load balancer to fail over between two computers so that you now have a cluster in the general sense. Is this really the best way to accomplish what I need? Is there some way to leverage the old server 2003 SQL server to function as the devices that funnels http requests to the appropriate active server and then fails over if a problem occurs? Is there any third party clustering software that might help me accomplish this in a simpler fashion?

  Read the article

• Why is my second monitor not working?

  - by StampedeXV

  Since I have my new computer, I have a very weird problem. Facts: New Computer: Motherboard: ASRock Z77 Pro 3 Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i5-3570 Windows 7 64bit 500W beQuiet special edition (92% efficiency) 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 2 2 magnetic HDDs + 1 SDD 1 DVD-R Old Computer: Motherboard: Asus P55 something Graphics-card: Asus1GB D5 X EN GTX560 DCII OC/2DI R CPU: Intel i7-870 Windows 7 64bit 550W Corsair 8GB 1333MHz DDR3 Corsair RAM (CL9) Scythe Mugen 3 2 magnetic HDDs + 1 SDD 1 DVD-R On the old computer it worked fine with two monitors. Moving to the new (I took the same Graphics-card) it only works with one. The weird thing I mentioned is: not matter which one. But if I put both there, only one is available. There is no reaction at the start (where normally (at least if I remember correctly) the monitor shortly went from "standby" to "on"). Windows does not recognize a second monitor in the Device Manager. I have the latest drivers for Motherboard and Graphics-card. I have the latest BIOS drivers. I am out of ideas. Edit: completed computer setup

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• Problem with network after malware attack

  - by Cruelio

  Im trying to help some friends with a Win XP machine. I got rid of the malware using Malware Bytes, and HiJackThis. But now they(I) have another problem. When the computer boot into Windows it seems fine. When I start Internet Explorer the browser window opens just fine, but nothing happens for at minute or two. After the two minutes of waiting, the network icon appears in the taskbar next to the clock, and then everything works. The computer is connected to the internet using a Ethernet adapter. I have looked at the Rvent Log and found an error from Perfnet with eventid 2004 <Provider Name="PerfNet" /> <EventID Qualifiers="49152">2004</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> What I have tried so far: In the device manager i have uninstalled the Ethernet adapter and installed it again. I have uninstalled and installed the Windows File and Printer Sharing service. I have verified that both server and workstation services are started. What should I do next?

  Read the article

• How can I get Windows 7 to work with two Nvidia graphics cards with different drivers?

  - by Max

  This is similar to this question, but I am using more similar cards with Windows 7. I just purchased a Zotac Nvidia GeForce 7200 GS. I have a motherboard with two PCI Express x16 slots. There is already an MSI Nvidia GeForce 8800 GTS being used as the primary card, driving two LCD monitors. I would like the Zotac to output to a TV via DVI-out. Unfortunately, when Windows detects the Zotac and installs its drivers, or I manually install them, Windows stops being able to boot up. If I remove them and re-install the MSI 8800 drivers, I can boot again, but Windows can no longer see the Zotac 7200--it shows up as a yellow triangle in Device Manager. I've read conflicting reports about this. Some people claim that Windows 7 will support multiple heterogeneous graphics card drivers, as long as they are all using the same driver API ("WDDM?"). Others say that they have to be using the exact same driver, or it won't work. Others claim that you have to use the exact same card. which is it, exactly? I know I can run the MSI 8800 in SLI if I purchase another, but I don't need that kind of power--I just need HD-out to my television. I read somewhere that running two cards in SLI precludes you from using 100% of their output ports, so I'm not sure if that's an option. I suppose I could also run two MSI 8800's without SLI, but again, that's more power than I need (and more money than I'd like to spend). Also, I don't think this exact model is even manufactured anymore. Any ideas?

  Read the article

• Why can't I bind to 127.0.0.1 on Mac OS X?

  - by Noah Lavine

  Hello, I'm trying to set up a simple web server on Mac OS X, and I keep getting an error when I run bind. Here's what I'm running (this transcript uses GNU Guile, but just as a convenient interface to posix). (define addr (inet-aton "127.0.0.1")) ; get internal representation of 127.0.0.1 (define sockaddr (make-socket-address AF_INET addr 8080)) ; make a struct sockaddr (define sock (socket PF_INET SOCK_STREAM 0)) ; make a socket (bind sock sockaddr) ; bind the socket to the address That gives me the error In procedure bind: can't assign requested address. So I tried it again allowing any address. (define anyaddr (make-socket-address AF_INET INADDR_ANY 8080)) ; allow any address (bind sock anyaddr) And that works fine. But it's weird, because ifconfig lo0 says lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 So the loopback device is assigned to 127.0.0.1. So my question is, why can't I bind to that address? Thanks. Update: the output of route get 127.0.0.1 is route to: localhost destination: localhost interface: lo0 flags: <UP,HOST,DONE,LOCAL> recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire 49152 49152 0 0 0 0 16384 0

  Read the article

• How can I allow the Xbox 360 to browse movies on a network drive?

  - by Roger

  I've always been able to stream movies stored on my Windows 7 computer's local hard drive to the Xbox 360 with no problems. A few weeks ago, though, I got a Seagate Dockstar NAS device and moved my movies to it. Ever since then, I can't seem them in the Xbox. I've tried several different things. When I try to add the mapped drive to the Media Player library, it says that it can't share the files. (I don't have any security on the NAS drive). I've tried creating a symlink to a local drive, but that doesn't help. Neither does adding the UNC path directly. The Dockstar seems to have its own Xbox share capability, but it doesn't respect my folder structure - it brings over every video file on the drive in a single list, including several hundred home videos that aren't playable on the Xbox. Is there any way to use Media Player (or the Zune software) to share files stored on a NAS drive? Barring this, is there a lightweight, free server that will allow me to share these files while maintaining my folder structure?

  Read the article

• Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

  - by John Chadwick

  This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

  Read the article

• Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

  - by Ibn Ali al-Turki

  I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

  Read the article

• Configuring ZenOSS to monitor CPU load

  - by Tom

  I'm trying test out monitoring tools for a network at work with a coworker but neither of us have ever used an sort of monitoring tools before. Currently we are experimenting with ZenOSS and having some difficulties. We want to populate our CPU load graphs because that is one of the primary feature we are looking for in our monitoring tools but we have been unable to populate the graphs with data. So far we have installed the wmipreformance, sqldatasource, wmidatasource, snmpperformance(simple) zenpacks and the machine we are trying to monitor is running Windows XP. We have tried to model the device and everything seems to run and we've tride to add data points to graphs but the only options we recieve for graphs are CPU and Memory. We are able to monitor services, ZenOSS recognizes the make and model of the processor, RAM, and Harddrive and is even giving us metrics on available storage but again, we are looking for performance metrics such as CPU load and Memory utilization. I realize I probably didn't provide a lot of information but that is because we don't have a very good idea of what we are doing and can't find instruction either on the ZenOSS homepage or forums to monitor CPU load. If someone could give us step by step instruction on how to set up CPU load monitoring that would probably be more beneficial to us than a diagnostic of our current setup, but regardless, if I left any important information out and you need it to answer the question, please let me know. Thank you.

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• Wireless disconnects every 30 minutes

  - by Kez

  I have had a look through all the related questions and I get the feeling my problem is unique. My wireless connection disconnects every 30 minutes, for maybe 1 to 3 seconds. If I am browsing the web while it happens, I get the page cannot be displayed error message. I have checked the event logs as I was curious to know if there was anything in there. There is. Event 8033: BROWSER - The browser has forced an election on network \Device\NetBT_Tcpip_{B919CC30-25A9-45DD-A09F-549A6262FC9E} because a master browser was stopped. Reported exactly every 30 minutes which coincides with my wireless problem. I am running Windows 7 Ultimate, 32-bit. My wireless is Realtek RTL8187 integrated into a ASUS P5K-E/Wifi motherboard. It is on a workgroup and has never been on a domain. This problem does not affect any other computers. Wireless reception is great, and I have ensured that the wireless unit is transmitting on a frequency not used by any nearby wireless basestations. How can I fix this pesky problem?

  Read the article

< Previous Page | 869 870 871 872 873 874 875 876 877 878 879 880  | Next Page >