Search Results

Search found 27056 results on 1083 pages for 'build mode'.

Page 878/1083 | < Previous Page | 874 875 876 877 878 879 880 881 882 883 884 885  | Next Page >

  • Difference between SET autocommit=1 and START TRANSACTION in mysql (Have I missed something?)

    - by tkolar
    Hey there, I am reading up on transactions in mysql and am not sure whether I have grasped something specific correctly, and I want to be sure I understood that correctly, so here goes. I know what a transaction is supposed to do, I'm just not sure whether I understood the statement semantics or not. So, my question is, is anything wrong, (and, if that is the case, what is wrong) with the following: By default, autocommit mode is enabled in mysql. Now, SET autocommit=0; will begin a transaction, SET autocommit=1; will implicitly commit. It is possible to COMMIT; as well as ROLLBACK;, in both of which cases autocommit is still set to 0 afterwards (and a new transaction is implicitly started). START TRANSACTION; will basically SET autocommit=0; until a COMMIT; or ROLLBACK; takes place. In other words, START TRANSACTION; and SET autocommit=0; are equivalent, except for the fact that START TRANSACTION; does the equivalent of implicitly adding a SET autocommit=0; after COMMIT; or ROLLBACK; If that is the case, I don't understand http://dev.mysql.com/doc/refman/5.5/en/set-transaction.html#isolevel_serializable - seeing as having an isolation level implies that there is a transaction, meaning that autocommit should be off anyway? And if there is another difference (other than the one described above) between beginning a transaction and setting autocommit, what is it? Thanks a lot in advance for your help!

    Read the article

  • TreeNode Selection Problems in C#

    - by user455046
    Whenever I click outside the tree nodes text, on the control part, it tigers a node click event- but doesn't highlight the node. I am unsure why this is happening. I want the node to be selected on a click- when you click the nodes text- not the whitespace- I only assume that the nodes width reaches across the whole Treenode? I have the Treeview on dock.fill mode if that has something to do with it- I tried everything but can't get it to behave correctly. Maybe someone will know what's going on. Update: if (e.Location.IsEmpty) { Seems to work better- but still selects the node in the blank place where there is no text- Obviously the node width extends across the whole treeview it seems? Is there a better way to accomplish what I want? Or is that the best way? UPDATE: Previous idea isn't working- sigh- I thought it did it but it didn't. New Problem : I think part of the problem is related to the focus now when I switch from treeview.

    Read the article

  • Differentiate Between UITableView Editing States?

    - by Josh Kahane
    I have been looking at trying to differentiate between editing states in my UITableView. I need to call a method only when in editing mode after tapping the edit button, so when you get your cell slide in and you see the little circular delete icons but NOT when the user swipes to delete. Is there anyway I can differentiate between the two? Thanks. EDIT: Solution thanks to Rodrigo Both each cell and the entire tableview has an 'editing' BOOL value, so I loop through all the cells and if more than one of them is editing then we know the whole table is (the user tapped the edit button), however if only one is editing then we know that the user has swiped a cell, editing that individual one, this lets me deal with each editing state individually! - (void)setEditing:(BOOL)editing animated:(BOOL)animated { [super setEditing:editing animated:animated]; int i = 0; //When editing loop through cells and hide status image so it doesn't block delete controls. Fade back in when done editing. for (customGuestCell *cell in self.tableView.visibleCells) { if (cell.isEditing) { i += 1; } } if (i > 1) { for (customGuestCell *cell in self.tableView.visibleCells) { if (editing) { // loop through the visible cells and animate their imageViews [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.4]; cell.statusImg.alpha = 0; [UIView commitAnimations]; } } } else if (!editing) { for (customGuestCell *cell in self.tableView.visibleCells) { [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.4]; cell.statusImg.alpha = 1.0; [UIView commitAnimations]; } } }

    Read the article

  • bluetooth BluetoothSocket.connect() thread. how to close this thread

    - by Hia
    I am trying to make an android app that makes connection with bluetooth device. It works fine but when I call BluetoothSocket.connect() and it is not able to connect to devise its blocking. The thread and does not throw any exception. So when I try to close application while connect() is running its not responding. How can I cancel it? Used BluetoothSocket.close() in ... but still its not working for me. protected void simpleComm(Integer port) { // The documents tell us to cancel the discovery process. try { Method m = mmDevice.getClass().getMethod("createRfcommSocket", new Class[] { int.class }); mmSocket = (BluetoothSocket) m.invoke(mmDevice, port); mmSocket.connect(); // <== blocks untill is not connected Log.d(TAG, " connection success==="); }catch(Exception e){ if (!abort) { connectionFailed(); // Close the socket try { mmSocket.close(); // Start the service over to restart listening mode BluetoothService.this.start(); } catch (IOException e2) { Log.e(TAG,"unable to close() socket during connection failure", e2); } } return; } } public void cancel() { try { abort = true; mmSocket.close(); } catch (IOException e) { Log.e(TAG, "close() of connect socket failed", e); } }

    Read the article

  • Question about SharedPreferences

    - by chobo2
    I am looking an android Shared Preferences and I am wondering is there a way to just check if the preferences file exists. SharedPreferences mySharedPreferences ; mySharedPreferences=getSharedPreferences(“Name_of_your_preference”,mode); This above code leads me to believe that "Name_of_Your_preferene" is stored as a file or some sort of container that will contain your preferences. I am wondering is there away to check if this exists or not. When a user loads up an activity I want to save all the settings into this file with some default values(off for all settings). However I only want to do this if they are going to the page for the first time. Otherwise if I would do something like this every time the page loads up SharedPreferences.Editor editor= mySharedPreferences.edit(); /* now store your primitive type values. In this case it is true, 1f and Hello! World */ editor.putBolean(“myBoolean”,true); editor.putFloat(“myFloat”,1f); editor.putString(“myString”,” Hello! World”); I am guessing it would override all settings even ones they set.

    Read the article

  • TDC: The Developer's Conference Day One

    - by Tori Wieldt
    The Developer's Conference (TDC) kicked off Wednesday in São Paulo, Brazil. With over 3000 developers in attendance over five days, it is the premier multi-community developer conference in Brazil, organized by Globalcode. Yara Senger, one of the organizers said, "We like to say multi-community rather than multi-technology because it is interesting and benefical when various communities get together. They learn so much from each other!" TDC includes tracks on Java and several other technologies, including SOA, Python, Ruby, mobile and digital TV. In the mobile track, developers who create a Java ME app will get a Nokia S40 phone!New this year at TDC is the Java University track, sponsored by Oracle.  It is aimed at university students and professionals who are new to Java. The lectures are introductory level, with an educational focus and practical exercises. The Java track and other tracks, such as SOA, mobile and Digital TV, are getting lots of help from the expertise of Brazilian JUGS members. Thanks to GoJava, JavaBahia, JavaNoroeste and SouJava!Carlos Fernando, one of the coordinators on the Digital TV track, said "My goal is to teach developers the basics of digital TV, and show them the tools used to build interactive TV applications." Fernando explained the concept of "the second screen:" that many people watch TV and have second smart device (tablet or smartphone) with them, and this creates many opportunities for developers. For example, while watching TV, a viewer can get extra content (interviews, behind the scenes) on their tablet. More interestingly, while watching their favorite TV show a viewer likes an outfit one of the actors is wearing, their smartphone can tell them where they can buy it nearby, or they can order it online immediately. Fernando exclaimed, "The opportunities for developers are nearly infinite in the area of digital TV!" At the TDC opening keynote, Debora Palermo, Oracle University country manager for Brazil, reminded attendees that Java is present in many devices, from simple to complex, and knowledge of this platform can open many doors in the labor market. She explained Oracle's Workforce Development Program (WDP), managed by Oracle University, which allows educational institutions to deliver Oracle training. WDP allows for easy and low-cost access to Oracle training in local communities across the world. "Oracle University is committed to creating the next generation of Java developers, and WDP can make that happen," Palermo said. As of March 2012, Oracle University is partnering with Globalcode to offer WDP. Students can earn official Oracle Course Certifications, a great way to learn Java.Brazilian developers that cannot attend TDC can watch live streaming.

    Read the article

  • Integrating JavaScript Unit Tests with Visual Studio

    - by Stephen Walther
    Modern ASP.NET web applications take full advantage of client-side JavaScript to provide better interactivity and responsiveness. If you are building an ASP.NET application in the right way, you quickly end up with lots and lots of JavaScript code. When writing server code, you should be writing unit tests. One big advantage of unit tests is that they provide you with a safety net that enable you to safely modify your existing code – for example, fix bugs, add new features, and make performance enhancements -- without breaking your existing code. Every time you modify your code, you can execute your unit tests to verify that you have not broken anything. For the same reason that you should write unit tests for your server code, you should write unit tests for your client code. JavaScript is just as susceptible to bugs as C#. There is no shortage of unit testing frameworks for JavaScript. Each of the major JavaScript libraries has its own unit testing framework. For example, jQuery has QUnit, Prototype has UnitTestJS, YUI has YUI Test, and Dojo has Dojo Objective Harness (DOH). The challenge is integrating a JavaScript unit testing framework with Visual Studio. Visual Studio and Visual Studio ALM provide fantastic support for server-side unit tests. You can easily view the results of running your unit tests in the Visual Studio Test Results window. You can set up a check-in policy which requires that all unit tests pass before your source code can be committed to the source code repository. In addition, you can set up Team Build to execute your unit tests automatically. Unfortunately, Visual Studio does not provide “out-of-the-box” support for JavaScript unit tests. MS Test, the unit testing framework included in Visual Studio, does not support JavaScript unit tests. As soon as you leave the server world, you are left on your own. The goal of this blog entry is to describe one approach to integrating JavaScript unit tests with MS Test so that you can execute your JavaScript unit tests side-by-side with your C# unit tests. The goal is to enable you to execute JavaScript unit tests in exactly the same way as server-side unit tests. You can download the source code described by this project by scrolling to the end of this blog entry. Rejected Approach: Browser Launchers One popular approach to executing JavaScript unit tests is to use a browser as a test-driver. When you use a browser as a test-driver, you open up a browser window to execute and view the results of executing your JavaScript unit tests. For example, QUnit – the unit testing framework for jQuery – takes this approach. The following HTML page illustrates how you can use QUnit to create a unit test for a function named addNumbers(). <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Using QUnit</title> <link rel="stylesheet" href="http://github.com/jquery/qunit/raw/master/qunit/qunit.css" type="text/css" /> </head> <body> <h1 id="qunit-header">QUnit example</h1> <h2 id="qunit-banner"></h2> <div id="qunit-testrunner-toolbar"></div> <h2 id="qunit-userAgent"></h2> <ol id="qunit-tests"></ol> <div id="qunit-fixture">test markup, will be hidden</div> <script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://github.com/jquery/qunit/raw/master/qunit/qunit.js"></script> <script type="text/javascript"> // The function to test function addNumbers(a, b) { return a+b; } // The unit test test("Test of addNumbers", function () { equals(4, addNumbers(1,3), "1+3 should be 4"); }); </script> </body> </html> This test verifies that calling addNumbers(1,3) returns the expected value 4. When you open this page in a browser, you can see that this test does, in fact, pass. The idea is that you can quickly refresh this QUnit HTML JavaScript test driver page in your browser whenever you modify your JavaScript code. In other words, you can keep a browser window open and keep refreshing it over and over while you are developing your application. That way, you can know very quickly whenever you have broken your JavaScript code. While easy to setup, there are several big disadvantages to this approach to executing JavaScript unit tests: You must view your JavaScript unit test results in a different location than your server unit test results. The JavaScript unit test results appear in the browser and the server unit test results appear in the Visual Studio Test Results window. Because all of your unit test results don’t appear in a single location, you are more likely to introduce bugs into your code without noticing it. Because your unit tests are not integrated with Visual Studio – in particular, MS Test -- you cannot easily include your JavaScript unit tests when setting up check-in policies or when performing automated builds with Team Build. A more sophisticated approach to using a browser as a test-driver is to automate the web browser. Instead of launching the browser and loading the test code yourself, you use a framework to automate this process. There are several different testing frameworks that support this approach: · Selenium – Selenium is a very powerful framework for automating browser tests. You can create your tests by recording a Firefox session or by writing the test driver code in server code such as C#. You can learn more about Selenium at http://seleniumhq.org/. LTAF – The ASP.NET team uses the Lightweight Test Automation Framework to test JavaScript code in the ASP.NET framework. You can learn more about LTAF by visiting the project home at CodePlex: http://aspnet.codeplex.com/releases/view/35501 jsTestDriver – This framework uses Java to automate the browser. jsTestDriver creates a server which can be used to automate multiple browsers simultaneously. This project is located at http://code.google.com/p/js-test-driver/ TestSwam – This framework, created by John Resig, uses PHP to automate the browser. Like jsTestDriver, the framework creates a test server. You can open multiple browsers that are automated by the test server. Learn more about TestSwarm by visiting the following address: https://github.com/jeresig/testswarm/wiki Yeti – This is the framework introduced by Yahoo for automating browser tests. Yeti uses server-side JavaScript and depends on Node.js. Learn more about Yeti at http://www.yuiblog.com/blog/2010/08/25/introducing-yeti-the-yui-easy-testing-interface/ All of these frameworks are great for integration tests – however, they are not the best frameworks to use for unit tests. In one way or another, all of these frameworks depend on executing tests within the context of a “living and breathing” browser. If you create an ASP.NET Unit Test then Visual Studio will launch a web server before executing the unit test. Why is launching a web server so bad? It is not the worst thing in the world. However, it does introduce dependencies that prevent your code from being tested in isolation. One of the defining features of a unit test -- versus an integration test – is that a unit test tests code in isolation. Another problem with launching a web server when performing unit tests is that launching a web server can be slow. If you cannot execute your unit tests quickly, you are less likely to execute your unit tests each and every time you make a code change. You are much more likely to fall into the pit of failure. Launching a browser when performing a JavaScript unit test has all of the same disadvantages as launching a web server when performing an ASP.NET unit test. Instead of testing a unit of JavaScript code in isolation, you are testing JavaScript code within the context of a particular browser. Using the frameworks listed above for integration tests makes perfect sense. However, I want to consider a different approach for creating unit tests for JavaScript code. Using Server-Side JavaScript for JavaScript Unit Tests A completely different approach to executing JavaScript unit tests is to perform the tests outside of any browser. If you really want to test JavaScript then you should test JavaScript and leave the browser out of the testing process. There are several ways that you can execute JavaScript on the server outside the context of any browser: Rhino – Rhino is an implementation of JavaScript written in Java. The Rhino project is maintained by the Mozilla project. Learn more about Rhino at http://www.mozilla.org/rhino/ V8 – V8 is the open-source Google JavaScript engine written in C++. This is the JavaScript engine used by the Chrome web browser. You can download V8 and embed it in your project by visiting http://code.google.com/p/v8/ JScript – JScript is the JavaScript Script Engine used by Internet Explorer (up to but not including Internet Explorer 9), Windows Script Host, and Active Server Pages. Internet Explorer is still the most popular web browser. Therefore, I decided to focus on using the JScript Script Engine to execute JavaScript unit tests. Using the Microsoft Script Control There are two basic ways that you can pass JavaScript to the JScript Script Engine and execute the code: use the Microsoft Windows Script Interfaces or use the Microsoft Script Control. The difficult and proper way to execute JavaScript using the JScript Script Engine is to use the Microsoft Windows Script Interfaces. You can learn more about the Script Interfaces by visiting http://msdn.microsoft.com/en-us/library/t9d4xf28(VS.85).aspx The main disadvantage of using the Script Interfaces is that they are difficult to use from .NET. There is a great series of articles on using the Script Interfaces from C# located at http://www.drdobbs.com/184406028. I picked the easier alternative and used the Microsoft Script Control. The Microsoft Script Control is an ActiveX control that provides a higher level abstraction over the Window Script Interfaces. You can download the Microsoft Script Control from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac After you download the Microsoft Script Control, you need to add a reference to it to your project. Select the Visual Studio menu option Project, Add Reference to open the Add Reference dialog. Select the COM tab and add the Microsoft Script Control 1.0. Using the Script Control is easy. You call the Script Control AddCode() method to add JavaScript code to the Script Engine. Next, you call the Script Control Run() method to run a particular JavaScript function. The reference documentation for the Microsoft Script Control is located at the MSDN website: http://msdn.microsoft.com/en-us/library/aa227633%28v=vs.60%29.aspx Creating the JavaScript Code to Test To keep things simple, let’s imagine that you want to test the following JavaScript function named addNumbers() which simply adds two numbers together: MvcApplication1\Scripts\Math.js function addNumbers(a, b) { return 5; } Notice that the addNumbers() method always returns the value 5. Right-now, it will not pass a good unit test. Create this file and save it in your project with the name Math.js in your MVC project’s Scripts folder (Save the file in your actual MVC application and not your MVC test application). Creating the JavaScript Test Helper Class To make it easier to use the Microsoft Script Control in unit tests, we can create a helper class. This class contains two methods: LoadFile() – Loads a JavaScript file. Use this method to load the JavaScript file being tested or the JavaScript file containing the unit tests. ExecuteTest() – Executes the JavaScript code. Use this method to execute a JavaScript unit test. Here’s the code for the JavaScriptTestHelper class: JavaScriptTestHelper.cs   using System; using System.IO; using Microsoft.VisualStudio.TestTools.UnitTesting; using MSScriptControl; namespace MvcApplication1.Tests { public class JavaScriptTestHelper : IDisposable { private ScriptControl _sc; private TestContext _context; /// <summary> /// You need to use this helper with Unit Tests and not /// Basic Unit Tests because you need a Test Context /// </summary> /// <param name="testContext">Unit Test Test Context</param> public JavaScriptTestHelper(TestContext testContext) { if (testContext == null) { throw new ArgumentNullException("TestContext"); } _context = testContext; _sc = new ScriptControl(); _sc.Language = "JScript"; _sc.AllowUI = false; } /// <summary> /// Load the contents of a JavaScript file into the /// Script Engine. /// </summary> /// <param name="path">Path to JavaScript file</param> public void LoadFile(string path) { var fileContents = File.ReadAllText(path); _sc.AddCode(fileContents); } /// <summary> /// Pass the path of the test that you want to execute. /// </summary> /// <param name="testMethodName">JavaScript function name</param> public void ExecuteTest(string testMethodName) { dynamic result = null; try { result = _sc.Run(testMethodName, new object[] { }); } catch { var error = ((IScriptControl)_sc).Error; if (error != null) { var description = error.Description; var line = error.Line; var column = error.Column; var text = error.Text; var source = error.Source; if (_context != null) { var details = String.Format("{0} \r\nLine: {1} Column: {2}", source, line, column); _context.WriteLine(details); } } throw new AssertFailedException(error.Description); } } public void Dispose() { _sc = null; } } }     Notice that the JavaScriptTestHelper class requires a Test Context to be instantiated. For this reason, you can use the JavaScriptTestHelper only with a Visual Studio Unit Test and not a Basic Unit Test (These are two different types of Visual Studio project items). Add the JavaScriptTestHelper file to your MVC test application (for example, MvcApplication1.Tests). Creating the JavaScript Unit Test Next, we need to create the JavaScript unit test function that we will use to test the addNumbers() function. Create a folder in your MVC test project named JavaScriptTests and add the following JavaScript file to this folder: MvcApplication1.Tests\JavaScriptTests\MathTest.js /// <reference path="JavaScriptUnitTestFramework.js"/> function testAddNumbers() { // Act var result = addNumbers(1, 3); // Assert assert.areEqual(4, result, "addNumbers did not return right value!"); }   The testAddNumbers() function takes advantage of another JavaScript library named JavaScriptUnitTestFramework.js. This library contains all of the code necessary to make assertions. Add the following JavaScriptnitTestFramework.js to the same folder as the MathTest.js file: MvcApplication1.Tests\JavaScriptTests\JavaScriptUnitTestFramework.js var assert = { areEqual: function (expected, actual, message) { if (expected !== actual) { throw new Error("Expected value " + expected + " is not equal to " + actual + ". " + message); } } }; There is only one type of assertion supported by this file: the areEqual() assertion. Most likely, you would want to add additional types of assertions to this file to make it easier to write your JavaScript unit tests. Deploying the JavaScript Test Files This step is non-intuitive. When you use Visual Studio to run unit tests, Visual Studio creates a new folder and executes a copy of the files in your project. After you run your unit tests, your Visual Studio Solution will contain a new folder named TestResults that includes a subfolder for each test run. You need to configure Visual Studio to deploy your JavaScript files to the test run folder or Visual Studio won’t be able to find your JavaScript files when you execute your unit tests. You will get an error that looks something like this when you attempt to execute your unit tests: You can configure Visual Studio to deploy your JavaScript files by adding a Test Settings file to your Visual Studio Solution. It is important to understand that you need to add this file to your Visual Studio Solution and not a particular Visual Studio project. Right-click your Solution in the Solution Explorer window and select the menu option Add, New Item. Select the Test Settings item and click the Add button. After you create a Test Settings file for your solution, you can indicate that you want a particular folder to be deployed whenever you perform a test run. Select the menu option Test, Edit Test Settings to edit your test configuration file. Select the Deployment tab and select your MVC test project’s JavaScriptTest folder to deploy. Click the Apply button and the Close button to save the changes and close the dialog. Creating the Visual Studio Unit Test The very last step is to create the Visual Studio unit test (the MS Test unit test). Add a new unit test to your MVC test project by selecting the menu option Add New Item and selecting the Unit Test project item (Do not select the Basic Unit Test project item): The difference between a Basic Unit Test and a Unit Test is that a Unit Test includes a Test Context. We need this Test Context to use the JavaScriptTestHelper class that we created earlier. Enter the following test method for the new unit test: [TestMethod] public void TestAddNumbers() { var jsHelper = new JavaScriptTestHelper(this.TestContext); // Load JavaScript files jsHelper.LoadFile("JavaScriptUnitTestFramework.js"); jsHelper.LoadFile(@"..\..\..\MvcApplication1\Scripts\Math.js"); jsHelper.LoadFile("MathTest.js"); // Execute JavaScript Test jsHelper.ExecuteTest("testAddNumbers"); } This code uses the JavaScriptTestHelper to load three files: JavaScripUnitTestFramework.js – Contains the assert functions. Math.js – Contains the addNumbers() function from your MVC application which is being tested. MathTest.js – Contains the JavaScript unit test function. Next, the test method calls the JavaScriptTestHelper ExecuteTest() method to execute the testAddNumbers() JavaScript function. Running the Visual Studio JavaScript Unit Test After you complete all of the steps described above, you can execute the JavaScript unit test just like any other unit test. You can use the keyboard combination CTRL-R, CTRL-A to run all of the tests in the current Visual Studio Solution. Alternatively, you can use the buttons in the Visual Studio toolbar to run the tests: (Unfortunately, the Run All Impacted Tests button won’t work correctly because Visual Studio won’t detect that your JavaScript code has changed. Therefore, you should use either the Run Tests in Current Context or Run All Tests in Solution options instead.) The results of running the JavaScript tests appear side-by-side with the results of running the server tests in the Test Results window. For example, if you Run All Tests in Solution then you will get the following results: Notice that the TestAddNumbers() JavaScript test has failed. That is good because our addNumbers() function is hard-coded to always return the value 5. If you double-click the failing JavaScript test, you can view additional details such as the JavaScript error message and the line number of the JavaScript code that failed: Summary The goal of this blog entry was to explain an approach to creating JavaScript unit tests that can be easily integrated with Visual Studio and Visual Studio ALM. I described how you can use the Microsoft Script Control to execute JavaScript on the server. By taking advantage of the Microsoft Script Control, we were able to execute our JavaScript unit tests side-by-side with all of our other unit tests and view the results in the standard Visual Studio Test Results window. You can download the code discussed in this blog entry from here: http://StephenWalther.com/downloads/Blog/JavaScriptUnitTesting/JavaScriptUnitTests.zip Before running this code, you need to first install the Microsoft Script Control which you can download from here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7e31492-2595-49e6-8c02-1426fec693ac

    Read the article

  • Tools and Utilities for the .NET Developer

    - by mbcrump
    Tweet this list! Add a link to my site to your bookmarks to quickly find this page again! Add me to twitter! This is a list of the tools/utilities that I use to do my job/hobby. I wanted this page to load fast and contain information that only you care about. If I have missed a tool that you like, feel free to contact me and I will add it to the list. Also, this list took a lot of time to complete. Please do not steal my work, if you like the page then please link back to my site. I will keep the links/information updated as new tools/utilities are created.  Windows/.NET Development – This is a list of tools that any Windows/.NET developer should have in his bag. I have used at some point in my career everything listed on this page and below is the tools worth keeping. Name Description License AnkhSVN Subversion support for Visual Studio. It also works with VS2010. Free Aurora XAML Designer One of the best XAML creation tools available. Has a ton of built in templates that you can copy/paste into VS2010. COST/Trial BeyondCompare Beyond Compare 3 is the ideal tool for comparing files and folders on your Windows or Linux system. Visualize changes in your code and carefully reconcile them. COST/Trial BuildIT Automated Task Tool Its main purpose is to automate tasks, whether it is the final packaging of a product, an automated daily build, maybe sending out a mailing list, even backing-up files. Free C Sharper for VB Convert VB to C#. COST CLRProfiler Analyze and improve the behavior of your .NET app. Free CodeRush Direct competitor to ReSharper, contains similar feature. This is one of those decide for yourself. COST/Trial Disk2VHD Disk2vhd is a utility that creates VHD (Virtual Hard Disk - Microsoft's Virtual Machine disk format) versions of physical disks for use in Microsoft Virtual PC or Microsoft Hyper-V virtual machines (VMs). Free Eazfuscator.NET Is a free obfuscator for .NET. The main purpose is to protect intellectual property of software. Free EQATEC Profiler Make your .NET app run faster. No source code changes are needed. Just point the profiler to your app, run the modified code, and get a visual report. COST Expression Studio 3/4 Comes with Web, Blend, Sketch Flow and more. You can create websites, produce beautiful XAML and more. COST/Trial Expresso The award-winning Expresso editor is equally suitable as a teaching tool for the beginning user of regular expressions or as a full-featured development environment for the experienced programmer or web designer with an extensive knowledge of regular expressions. Free Fiddler Fiddler is a web debugging proxy which logs all HTTP(s) traffic between your computer and the internet. Free Firebug Powerful Web development tool. If you build websites, you will need this. Free FxCop FxCop is an application that analyzes managed code assemblies (code that targets the .NET Framework common language runtime) and reports information about the assemblies, such as possible design, localization, performance, and security improvements. Free GAC Browser and Remover Easy way to remove multiple assemblies from the GAC. Assemblies registered by programs like Install Shield can also be removed. Free GAC Util The Global Assembly Cache tool allows you to view and manipulate the contents of the global assembly cache and download cache. Free HelpScribble Help Scribble is a full-featured, easy-to-use help authoring tool for creating help files from start to finish. You can create Win Help (.hlp) files, HTML Help (.chm) files, a printed manual and online documentation (on a web site) all from the same Help Scribble project. COST/Trial IETester IETester is a free Web Browser that allows you to have the rendering and JavaScript engines of IE9 preview, IE8, IE7 IE 6 and IE5.5 on Windows 7, Vista and XP, as well as the installed IE in the same process. Free iTextSharp iText# (iTextSharp) is a port of the iText open source java library for PDF generation written entirely in C# for the .NET platform. Use the iText mailing list to get support. Free Kaxaml Kaxaml is a lightweight XAML editor that gives you a "split view" so you can see both your XAML and your rendered content. Free LINQPad LinqPad lets you interactively query databases in a LINQ. Free Linquer Many programmers are familiar with SQL and will need a help in the transition to LINQ. Sometimes there are complicated queries to be written and Linqer can help by converting SQL scripts to LINQ. COST/Trial LiquidXML Liquid XML Studio 2010 is an advanced XML developers toolkit and IDE, containing all the tools needed for designing and developing XML schema and applications. COST/Trial Log4Net log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime. We have kept the framework similar in spirit to the original log4j while taking advantage of new features in the .NET runtime. For more information on log4net see the features document. Free Microsoft Web Platform Installer The Microsoft Web Platform Installer 2.0 (Web PI) is a free tool that makes getting the latest components of the Microsoft Web Platform, including Internet Information Services (IIS), SQL Server Express, .NET Framework and Visual Web Developer easy. Free Mono Development Don't have Visual Studio - no problem! This is an open Source C# and .NET development environment for Linux, Windows, and Mac OS X Free Net Mass Downloader While it’s great that Microsoft has released the .NET Reference Source Code, you can only get it one file at a time while you’re debugging. If you’d like to batch download it for reading or to populate the cache, you’d have to write a program that instantiated and called each method in the Framework Class Library. Fortunately, .NET Mass Downloader comes to the rescue! Free nMap Nmap ("Network Mapper") is a free and open source (license) utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. Free NoScript (Firefox add-in) The NoScript Firefox extension provides extra protection for Firefox, Flock, Seamonkey and other Mozilla-based browsers: this free, open source add-on allows JavaScript, Java and Flash and other plug-ins to be executed only by trusted web sites of your choice (e.g. your online bank), and provides the most powerful Anti-XSS protection available in a browser. Free NotePad 2 Notepad2, a fast and light-weight Notepad-like text editor with syntax highlighting. This program can be run out of the box without installation, and does not touch your system's registry. Free PageSpy PageSpy is a small add-on for Internet Explorer that allows you to select any element within a webpage, select an option in the context menu, and view detailed information about both the coding behind the page and the element you selected. Free Phrase Express PhraseExpress manages your frequently used text snippets in customizable categories for quick access. Free PowerGui PowerGui is a free community for PowerGUI, a graphical user interface and script editor for Microsoft Windows PowerShell! Free Powershell Comes with Win7, but you can automate tasks by using the .NET Framework. Great for network admins. Free Process Explorer Ever wondered which program has a particular file or directory open? Now you can find out. Process Explorer shows you information about which handles and DLLs processes have opened or loaded. Also, included in the SysInterals Suite. Free Process Monitor Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity. Free Reflector Explore and analyze compiled .NET assemblies, viewing them in C#, Visual Basic, and IL. This is an Essential for any .NET developer. Free Regular Expression Library Stuck on a Regular Expression but you think someone has already figured it out? Chances are they have. Free Regulator Regulator makes Regular Expressions easy. This is a must have for a .NET Developer. Free RenameMaestro RenameMaestro is probably the easiest batch file renamer you'll find to instantly rename multiple files COST ReSharper The one program that I cannot live without. Supports VS2010 and offers simple refactoring, code analysis/assistance/cleanup/templates. One of the few applications that is worth the $$$. COST/Trial ScrewTurn Wiki ScrewTurn Wiki allows you to create, manage and share wikis. A wiki is a collaboratively-edited, information-centered website: the most famous is Wikipedia. Free SharpDevelop What is #develop? SharpDevelop is a free IDE for C# and VB.NET projects on Microsoft's .NET platform. Free Show Me The Template Show Me The Template is a tool for exploring the templates, be their data, control or items panel, that comes with the controls built into WPF for all 6 themes. Free SnippetCompiler Compiles code snippets without opening Visual Studio. It does not support .NET 4. Free SQL Prompt SQL Prompt is a plug-in that increases how fast you can work with SQL. It provides code-completion for SQL server, reformatting, db schema information and snippets. Awesome! COST/Trial SQLinForm SQLinForm is an automatic SQL code formatter for all major databases  including ORACLE, SQL Server, DB2, UDB, Sybase, Informix, PostgreSQL, Teradata, MySQL, MS Access etc. with over 70 formatting options. COST/OnlineFree SSMS Tools SSMS Tools Pack is an add-in for Microsoft SQL Server Management Studio (SSMS) including SSMS Express. Free Storm STORM is a free and open source tool for testing web services. Free Telerik Code Convertor Convert code from VB to C Sharp and Vice Versa. Free TurtoiseSVN TortoiseSVN is a really easy to use Revision control / version control / source control software for Windows.Since it's not an integration for a specific IDE you can use it with whatever development tools you like. Free UltraEdit UltraEdit is the ideal text, HTML and hex editor, and an advanced PHP, Perl, Java and JavaScript editor for programmers. UltraEdit is also an XML editor including a tree-style XML parser. An industry-award winner, UltraEdit supports disk-based 64-bit file handling (standard) on 32-bit Windows platforms (Windows 2000 and later). COST/Trial Virtual Windows XP Comes with some W7 version and allows you to run WinXP along side W7. Free VirtualBox Virtualization by Sun Microsystems. You can virtualize Windows, Linux and more. Free Visual Log Parser SQL queries against a variety of log files and other system data sources. Free WinMerge WinMerge is an Open Source differencing and merging tool for Windows. WinMerge can compare both folders and files, presenting differences in a visual text format that is easy to understand and handle. Free Wireshark Wireshark is one of the best network protocol analyzer's for Unix and windows. This has been used several times to get me out of a bind. Free XML Notepad 07 Old, but still one of my favorite XML viewers. Free Productivity Tools – This is the list of tools that I use to save time or quickly navigate around Windows. Name Description License AutoHotKey Automate almost anything by sending keystrokes and mouse clicks. You can write a mouse or keyboard macro by hand or use the macro recorder. Free CLCL CLCL is clipboard caching utility. Free Ditto Ditto is an extension to the standard windows clipboard. It saves each item placed on the clipboard allowing you access to any of those items at a later time. Ditto allows you to save any type of information that can be put on the clipboard, text, images, html, custom formats, ..... Free Evernote Remember everything from notes to photos. It will synch between computers/devices. Free InfoRapid Inforapid is a search tool that will display all you search results in a html like browser. If you click on a word in that browser, it will start another search to the word you clicked on. Handy if you want to trackback something to it's true origin. The word you looked for will be highlighted in red. Clicking on the red word will open the containing file in a text based viewer. Clicking on any word in the opened document will start another search on that word. Free KatMouse The prime purpose of the KatMouse utility is to enhance the functionality of mice with a scroll wheel, offering 'universal' scrolling: moving the mouse wheel will scroll the window directly beneath the mouse cursor (not the one with the keyboard focus, which is default on Windows OSes). This is a major increase in the usefulness of the mouse wheel. Free ScreenR Instant Screencast with nothing to download. Works with Mac or PC and free. Free Start++ Start++ is an enhancement for the Start Menu in Windows Vista. It also extends the Run box and the command-line with customizable commands.  For example, typing "w Windows Vista" will take you to the Windows Vista page on Wikipedia! Free Synergy Synergy lets you easily share a single mouse and keyboard between multiple computers with different operating systems, each with its own display, without special hardware. It's intended for users with multiple computers on their desk since each system uses its own monitor(s). Free Texter Texter lets you define text substitution hot strings that, when triggered, will replace hotstring with a larger piece of text. By entering your most commonly-typed snippets of text into Texter, you can save countless keystrokes in the course of the day. Free Total Commander File handling, FTP, Archive handling and much more. Even works with Win3.11. COST/Trial Available Wizmouse WizMouse is a mouse enhancement utility that makes your mouse wheel work on the window currently under the mouse pointer, instead of the currently focused window. This means you no longer have to click on a window before being able to scroll it with the mouse wheel. This is a far more comfortable and practical way to make use of the mouse wheel. Free Xmarks Bookmark sync and search between computers. Free General Utilities – This is a list for power user users or anyone that wants more out of Windows. I usually install a majority of these whenever I get a new system. Name Description License µTorrent µTorrent is a lightweight and efficient BitTorrent client for Windows or Mac with many features. I use this for downloading LEGAL media. Free Audacity Audacity® is free, open source software for recording and editing sounds. It is available for Mac OS X, Microsoft Windows, GNU/Linux, and other operating systems. Learn more about Audacity... Also check our Wiki and Forum for more information. Free AVast Free FREE Antivirus. Free CD Burner XP Pro CDBurnerXP is a free application to burn CDs and DVDs, including Blu-Ray and HD-DVDs. It also includes the feature to burn and create ISOs, as well as a multilanguage interface. Free CDEX You can extract digital audio CDs into mp3/wav. Free Combofix Combofix is a freeware (a legitimate spyware remover created by sUBs), Combofix was designed to scan a computer for known malware, spyware (SurfSideKick, QooLogic, and Look2Me as well as any other combination of the mentioned spyware applications) and remove them. Free Cpu-Z Provides information about some of the main devices of your system. Free Cropper Cropper is a screen capture utility written in C#. It makes it fast and easy to grab parts of your screen. Use it to easily crop out sections of vector graphic files such as Fireworks without having to flatten the files or open in a new editor. Use it to easily capture parts of a web site, including text and images. It's also great for writing documentation that needs images of your application or web site. Free DropBox Drag and Drop files to sync between computers. Free DVD-Fab Converts/Copies DVDs/Blu-Ray to different formats. (like mp4, mkv, avi) COST/Trial Available FastStone Capture FastStone Capture is a powerful, lightweight, yet full-featured screen capture tool that allows you to easily capture and annotate anything on the screen including windows, objects, menus, full screen, rectangular/freehand regions and even scrolling windows/web pages. Free ffdshow FFDShow is a DirectShow decoding filter for decompressing DivX, XviD, H.264, FLV1, WMV, MPEG-1 and MPEG-2, MPEG-4 movies. Free Filezilla FileZilla Client is a fast and reliable cross-platform FTP, FTPS and SFTP client with lots of useful features and an intuitive graphical user interface. You can also download a server version. Free FireFox Web Browser, do you really need an explanation? Free FireGestures A customizable mouse gestures extension which enables you to execute various commands and user scripts with five types of gestures. Free FoxIt Reader Light weight PDF viewer. You should install this with the advanced setting or it will install a toolbar and setup some shortcuts. Free gSynchIt Synch Gmail and Outlook. Even supports Outlook 2010 32/64 bit COST/Trial Available Hulu Desktop At home or in a hotel, this has replaced my cable/satellite subscription. Free ImgBurn ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! Free Infrarecorder InfraRecorder is a free CD/DVD burning solution for Microsoft Windows. It offers a wide range of powerful features; all through an easy to use application interface and Windows Explorer integration. Free KeePass KeePass is a free open source password manager, which helps you to manage your passwords in a secure way. Free LastPass Another password management, synchronize between browsers, automatic form filling and more. Free Live Essentials One download and lots of programs including Mail, Live Writer, Movie Maker and more! Free Monitores MonitorES is a small windows utility that helps you to turnoff monitor display when you lock down your machine.Also when you lock your machine, it will pause all your running media programs & set your IM status message to "Away" / Custom message(via options) and restore it back to normal when you back. Free mRemote mRemote is a full-featured, multi-tab remote connections manager. Free Open Office OpenOffice.org 3 is the leading open-source office software suite for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers. It stores all your data in an international open standard format and can also read and write files from other common office software packages. It can be downloaded and used completely free of charge for any purpose. Free Paint.NET Simple, intuitive, and innovative user interface for editing photos. Free Picasa Picasa is free photo editing software from Google that makes your pictures look great. Free Pidgin Pidgin is an easy to use and free chat client used by millions. Connect to AIM, MSN, Yahoo, and more chat networks all at once. Free PING PING is a live Linux ISO, based on the excellent Linux From Scratch (LFS) documentation. It can be burnt on a CD and booted, or integrated into a PXE / RIS environment. Free Putty PuTTY is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. Free Revo Uninstaller Revo Uninstaller Pro helps you to uninstall software and remove unwanted programs installed on your computer easily! Even if you have problems uninstalling and cannot uninstall them from "Windows Add or Remove Programs" control panel applet.Revo Uninstaller is a much faster and more powerful alternative to "Windows Add or Remove Programs" applet! It has very powerful features to uninstall and remove programs. Free Security Essentials Microsoft Security Essentials is a new, free consumer anti-malware solution for your computer. Free SetupVirtualCloneDrive Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Point to the .ISO file and it appears in Windows Explorer as a Drive. Free Shark 007 Codec Pack Play just about any file format with this download. Also includes my W7 Media Playlist Generator. Free Snagit 9 Screen Capture on steroids. Add arrows, captions, etc to any screenshot. COST/Trial Available SysinternalsSuite Go ahead and download the entire sys internals suite. I have mentioned multiple programs in this suite already. Free TeraCopy TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features. Free for Home TrueCrypt Free open-source disk encryption software for Windows 7/Vista/XP, Mac OS X, and Linux Free TweetDeck Fully featured Twitter client. Free UltraVNC UltraVNC is a powerful, easy to use and free software that can display the screen of another computer (via internet or network) on your own screen. The program allows you to use your mouse and keyboard to control the other PC remotely. It means that you can work on a remote computer, as if you were sitting in front of it, right from your current location. Free Unlocker Unlocks locked files. Pretty simple right? Free VLC Media Player VLC media player is a highly portable multimedia player and multimedia framework capable of reading most audio and video formats Free Windows 7 Media Playlist This program is special to my heart because I wrote it. It has been mentioned on podcast and various websites. It allows you to quickly create wvx video playlist for Windows Media Center. Free WinRAR WinRAR is a powerful archive manager. It can backup your data and reduce the size of email attachments, decompress RAR, ZIP and other files downloaded from Internet and create new archives in RAR and ZIP file format. COST/Trial Available Blogging – I use the following for my blog. Name Description License Insert Code for Windows Live Writer Insert Code for Windows Live Writer will format a snippet of text in a number of programming languages such as C#, HTML, MSH, JavaScript, Visual Basic and TSQL. Free LiveWriter Included in Live Essentials, but the ultimate in Windows Blogging Free PasteAsVSCode Plug-in for Windows Live Writer that pastes clipboard content as Visual Studio code. Preserves syntax highlighting, indentation and background color. Converts RTF, outputted by Visual Studio, into HTML. Free Desktop Management – The list below represent the best in Windows Desktop Management. Name Description License 7 Stacks Allows users to have "stacks" of icons in their taskbar. Free Executor Executor is a multi purpose launcher and a more advanced and customizable version of windows run. Free Fences Fences is a program that helps you organize your desktop and can hide your icons when they are not in use. Free RocketDock Rocket Dock is a smoothly animated, alpha blended application launcher. It provides a nice clean interface to drop shortcuts on for easy access and organization. With each item completely customizable there is no end to what you can add and launch from the dock. Free WindowsTab Tabbing is an essential feature of modern web browsers. Window Tabs brings the productivity of tabbed window management to all of your desktop applications. Free

    Read the article

  • How to implement multi-source XSLT mapping in 11g BPEL

    - by [email protected]
    In SOA 11g, you can create a XSLT mapper that uses multiple sources as the input. To implement a multi-source mapper, just follow the instructions below, Drag and drop a Transform Activity to a BPEL process Double-click on the Transform Activity, the Transform dialog window appears. Add source variables by clicking the Add icon and selecting the variable and part of the variable as needed. You can select multiple input variables. The first variable represents the main XML input to the XSL mapping, while additional variables that are added here are defined in the XSL mapping as input parameters. Select the target variable and its part if available. Specify the mapper file name, the default file name is xsl/Transformation_%SEQ%.xsl, where %SEQ% represents the sequence number of the mapper. Click OK, the xls file will be opened in the graphical mode. You can map the sources to the target as usual. Open the mapper source code, you will notice the variable representing the additional source payload, is defined as the input parameter in the map source spec and body<mapSources>    <source type="XSD">      <schema location="../xsd/po.xsd"/>      <rootElement name="PurchaseOrder" namespace="http://www.oracle.com/pcbpel/po"/>    </source>    <source type="XSD">      <schema location="../xsd/customer.xsd"/>      <rootElement name="Customer" namespace="http://www.oracle.com/pcbpel/Customer"/>      <param name="v_customer" />    </source>  </mapSources>...<xsl:param name="v_customer"/> Let's take a look at the BPEL source code used to execute xslt mapper. <assign name="Transform_1">            <bpelx:annotation>                <bpelx:pattern>transformation</bpelx:pattern>            </bpelx:annotation>            <copy>                <from expression="ora:doXSLTransformForDoc('xsl/Transformation_1.xsl',bpws:getVariableData('v_po'),'v_customer',bpws:getVariableData('v_customer'))"/>                <to variable="v_invoice"/>            </copy>        </assign> You will see BPEL uses ora:doXSLTransformForDoc XPath function to execute the XSLT mapper.This function returns the result of  XSLT transformation when the xslt template matching the document. The signature of this function is  ora:doXSLTransformForDoc(template,input, [paramQName, paramValue]*).Wheretemplate is the XSLT mapper nameinput is the string representation of xml input, paramQName is the parameter defined in the xslt mapper as the additional sourceparameterValue is the additional source payload. You can add more sources to the mapper at the later stage, but you have to modify the ora:doXSLTransformForDoc in the BPEL source code and make sure it passes correct parameter and its value pair that reflects the changes in the XSLT mapper.So the best practices are : create the variables before creating the mapping file, therefore you can add multiple sources when you define the transformation in the first place, which is more straightforward than adding them later on. Review ora:doXSLTransformForDoc code in the BPEL source and make sure it passes the correct parameters to the mapper.

    Read the article

  • Feb 2nd Links: Visual Studio, ASP.NET, ASP.NET MVC, JQuery, Windows Phone

    - by ScottGu
    Here is the latest in my link-listing series.  Also check out my Best of 2010 Summary for links to 100+ other posts I’ve done in the last year. [I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Community News MVCConf Conference Next Wednesday: Attend the free, online ASP.NET MVC Conference being organized by the community next Wednesday.  Here is a list of some of the talks you can watch live. Visual Studio HTML5 and CSS3 in VS 2010 SP1: Good post from the Visual Studio web tools team that talks about the new support coming in VS 2010 SP1 for HTML5 and CSS3. Database Deployment with the VS 2010 Package/Publish Database Tool: Rachel Appel has a nice post that covers how to enable database deployment using the built-in VS 2010 web deployment support.  Also check out her ASP.NET web deployment post from last month. VsVim Update Released: Jared posts about the latest update of his VsVim extension for Visual Studio 2010.  This free extension enables VIM based key-bindings within VS. ASP.NET How to Add Mobile Pages to your ASP.NET Web Forms / MVC Apps: Great whitepaper by Steve Sanderson that covers how to mobile-enable your ASP.NET and ASP.NET MVC based applications. New Entity Framework Tutorials for ASP.NET Developers: The ASP.NET and EF teams have put together a bunch of nice tutorials on using the Entity Framework data library with ASP.NET Web Forms. Using ASP.NET Dynamic Data with EF Code First (via NuGet): Nice post from David Ebbo that talks about how to use the new EF Code First Library with ASP.NET Dynamic Data. Common Performance Issues with ASP.NET Web Sites: Good post with lots of performance tuning suggestions (mostly deployment settings) for ASP.NET apps. ASP.NET MVC Razor View Converter: Free, automated tool from Terlik that can convert existing .aspx view templates to Razor view templates. ASP.NET MVC 3 Internationalization: Nadeem has a great post that talks about a variety of techniques you can use to enable Globalization and Localization within your ASP.NET MVC 3 applications. ASP.NET MVC 3 Tutorials by David Hayden: Great set of tutorials and posts by David Hayden on some of the new ASP.NET MVC 3 features. EF Fixed Concurrency Mode and MVC: Chris Sells has a nice post that talks about how to handle concurrency with updates done with EF using ASP.NET MVC. ASP.NET and jQuery jQuery Performance Tips and Tricks: A free 30 minute video that covers some great tips and tricks to keep in mind when using jQuery. jQuery 1.5’s AJAX rewrite and ASP.NET services - All is well: Nice post by Dave Ward that talks about using the new jQuery 1.5 to call ASP.NET ASMX Services. Good news according to Dave is that all is well :-) jQuery UI Modal Dialogs for ASP.NET MVC: Nice post by Rob Regan that talks about a few approaches you can use to implement dialogs with jQuery UI and ASP.NET MVC.  Windows Phone 7 Free PDF eBook on Building Windows Phone 7 Applications with Silverlight: Free book that walksthrough how to use Silverlight and Visual Studio to build Windows Phone 7 applications. Hope this helps, Scott

    Read the article

  • SQL Server Editions and Integration Services

    The SQL Server 2005 and SQL Server 2008 product family has quite a few editions now, so what does this mean for SQL Server Integration Services? Starting from the bottom we have the free edition known as Express, and the entry level Workgroup edition, as well as the new Web edition. None of these three include the full SSIS product, but they do all include the SQL Server Import and Export Wizard, with access to basic data sources but nothing more, so for simple loading and extraction of data this should suffice. You will not be able to build packages though, this is just a one shot deal aimed at using the wizard on an ad-hoc basis. To get the full power of Integration Services you need to start with Standard edition. This includes the BI Development Studio, for building your own packages, and fully functional IDE integrated into Visual Studio. (You get the full VS 2005/2008 IDE with the product). All core functions will be available but with a restricted set of transformations and tasks. The SQL Server 2005 Features Comparison or Features Supported by the Editions of SQL Server 2008 describes standard edition as having basic transforms, compared to Enterprise which includes the advanced transforms. I think basic is a little harsh considering the power you get with Standard, but the advanced covers the truly ground-breaking capabilities of data mining, text mining and cleansing or fuzzy transforms. The power of performing these operations within your ETL pipeline should not be underestimated, but not all processes will require these capabilities, so it seems like a reasonable delineation. Thankfully there are no feature limitations or artificial governors within Standard compared to Enterprise. The same control flow and data flow engines underpin both editions, with the same configuration and deployment options allowing you to work seamlessly between environments and editions if using the common components. In fact there are no govenors at all in SSIS, so whilst the SQL Database engine is limited to 4 CPUs in Standard edition, SSIS is only limited by the base operating system. The advanced transforms only available with Enterprise edition: Data Mining Training Destination Data Mining Query Component Fuzzy Grouping Fuzzy Lookup Term Extraction Term Lookup Dimension Processing Destination Partition Processing Destination The advanced tasks only available with Enterprise edition: Data Mining Query Task So in summary, if you want SQL Server Integration Services, you need SQL Server Standard edition, and for the more advanced tasks and transforms you need SQL Server Enterprise edition. To recap, the answer to the often asked question is no, SQL Server Integration Services is not available in SQL Server Express or Workgroup editions.

    Read the article

  • Add New Features to WMP with Windows Media Player Plus

    - by DigitalGeekery
    Do you use Windows Media Player 11 or 12 as your default media player? Today, we’re going to show you how to add some handy new features and enhancements with the Windows Media Player Plus third party plug-in. Installation and Setup Download and install Media Player Plus! (link below). You’ll need to close out of Windows Media Player before you begin or you’ll receive the message below. The next time you open Media Player you’ll be presented with the Media Player Plus settings window. Some of the settings will be enabled by default, such as the Find as you type feature. Using Media Player Plus! Find as you type allows you to start typing a search term from anywhere in Media Player without having to be in the Search box. The search term will automatically fill in the search box and display the results.   You’ll also see Disable group headers in the Library Pane.   This setting will display library items in a continuous list similar to the functionality of Windows Media Player 10. Under User Interface you can enable displaying the currently playing artist and title in the title bar. This is enabled by default.   The Context Menu page allows you to enable context menu enhancements. The File menu enhancement allows you to add the Windows Context menu to Media Player on the library pane, list pane, or both. Right click on a Title, select File, and you’ll see the Windows Context Menu. Right-click on a title and select Tag Editor Plus. Tag Editor Plus allows you to quickly edit media tags.   The Advanced tab displays a number of tags that Media Player usually doesn’t show. Only the tags with the notepad and pencil icon are editable.   The Restore Plug-ins page allows you to configure which plug-ins should be automatically restored after a Media Player crash. The Restore Media at Startup page allows you to configure Media Player to resume playing the last playlist, track, and even whether it was playing or paused at the time the application was closed. So, if you close out in the middle of a song, it will begin playing from that point the next time you open Media Player. You can also set Media Player to rewind a certain number of seconds from where you left off. This is especially useful if you are in the middle of watching a movie. There’s also the option to have your currently playing song sent to Windows Live Messenger. You can access the settings at any time by going to Tools, Plug-in properties, and selecting Windows Media Player Plus. Windows Media Plus is a nice little free plug-in for WMP 11 and 12 that brings a lot of additional functionality to Windows Media Player. If you use Media Player 11 or WMP 12 in Windows 7 as your main player, you might want to give this a try. Download Windows Media Player Plus! Similar Articles Productive Geek Tips Install and Use the VLC Media Player on Ubuntu LinuxFixing When Windows Media Player Library Won’t Let You Add FilesMake VLC Player Look like Windows Media Player 10Make VLC Player Look like Windows Media Player 11Make Windows Media Player Automatically Open in Mini Player Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7

    Read the article

  • SOA 10g Developing a Simple Hello World Process

    - by [email protected]
    Softwares & Hardware Needed Intel Pentium D CPU 3 GHz, 2 GB RAM, Windows XP System ( Thats what i am using ) You could as well use Linux , but please choose High End RAM 10G SOA Suite from Oracle(TM) , Read Installation documents at www.Oracle.com J Developer 10.1.3.3 Official Documents at http://www.oracle.com/technology/products/ias/bpel/index.html java -version Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)BPEL Introduction - Developing a Simple Hello World Process  Synchronous BPEL Process      This Exercise focuses on developing a Synchronous Process, which mean you give input to the BPEL Process you get output immediately no waiting at all. The Objective of this exercise is to give input as name and it greets with Hello Appended by that name example, if I give input as "James" the BPEL process returns "Hello James". 1. Open the Oracle JDeveloper click on File -> New Application give the name "JamesApp" you can give your own name if it pleases you. Select the folder where you want to place the application. Click "OK" 2. Right Click on the "JamesApp" in the Application Navigator, Select New Menu. 3. Select "Projects" under "General" and "BPEL Process Project", click "OK" these steps remain same for all BPEL Projects 4. Project Setting Wizard Appears, Give the "Process Name" as "MyBPELProc" and Namespace as http://xmlns.james.com/ MyBPELProc, Select Template as "Synchronous BPEL Process click "Next" 5. Accept the input and output schema names as it is, click "Finish" 6. You would see the BPEL Process Designer, some of the folders such as Integration content and Resources are created and few more files 7. Assign Activity : Allows Assigning values to variables or copying values of one variable to another and also do some string manipulation or mathematical operations In the component palette at extreme right, select Process Activities from the drop down, and drag and drop "Assign" between "receive Input" and "replyOutput" 8. You can right click and edit the Assign activity and give any suitable name "AssignHello", 9. Select "Copy Operation" Tab create "Copy Operation" 10. In the From variables click on expression builder, select input under "input variable", Click on insert into expression bar, complete the concat syntax, Note to use "Ctrl+space bar" inside expression window to Auto Populate the expression as shown in the figure below. What we are actually doing here is concatenating the String "Hello ", with the variable value received through the variable named "input" 11. Observe that once an expression is completed the "To Variable" is assigned to a variable by name "result" 12. Finally the copy variable looks as below 13. It's the time to deploy, start the SOA Suite 14. Establish connection to the Server from JDeveloper, this can be done adding a New Application Server under Connection, give the server name, username and password and test connection. 15. Deploy the "MyBPELProc" to the "default domain" 16. http://localhost:8080/ allows connecting to SOA Suite web portal, click on "BPEL Control" , login with the username "oc4jadmin" password what ever you gave during installation 17. "MyBPELProc" is visisble under "Deployed BPEL Processes" in the "Dashboard" Tab, click on the it 18. Initiate tab open to accept input, enter data such as input is "James" click on "Post XML Button" 19. Click on Visual Flow 20. Click on receive Input , it shows "James" as input received 21. Click on reply Output, it shows "Hello James" so the BPEL process is successfully executed. 22. It may be worth seeing all the instance created everytime a BPEL process is executed by giving some inputs. Purge All button allows to delete all the unwanted previous instances of BPEL process, dont worry it wont delete the BPEL process itself :-) 23. It may also be some importance to understand the XSD File which holds input & output variable names & data types. 24. You could drag n drop variables as elements over sequence at the designer or directly edit the XML Source file. 

    Read the article

  • Special Activities in the OTN Lounge

    - by Bob Rhubart
    What is the OTN Lounge? It's the place for Oracle OpenWorld and JavaOne attendees to hang out, get off your feet, rest up between sessions, recharge your laptop, tablet, or phone, connect with other community members, pick the brains of subject matter experts and community leaders, enjoy some refreshments (coffee and soft drinks in the morning, beer in the afternoon), and avoid the crowds by watching keynote presentations on a plasma screen. But in addition to general chillaxin' the OTN Lounge also hosts several special activities throughout the week… OTN Lounge Special Activities Sunday Oracle Social Network Developer Challenge Kick-off   (7:00pm - 8:30pm)Want to learn more about Oracle Social Network? Love working with APIs? Enter the Oracle Social Network Developer Challenge and build your dream integration with Oracle's secure, purposeful social network for business. Demonstrate your skills, work with the latest and greatest and compete for $500 in Amazon gift cards. Go to theappslab.com/osnregisterr Read and agree to the terms and rules. Register yourself with your name, corporate email address, and company. Watch your inbox for a confirmation email from Oracle Social Network. Start coding (individual or teams welcome) Show off your work to the judges in the OTN Lounge, Wednesday, 4:00pm - 6:00pm Monday (Lounge hours: 8:00am - 7:00pm) RAC Attack (9:00am - 1:00pm) Learn about Oracle Real Application Clustering (RAC) in this collaborative event. You'll work with experts from the IOUG RAC SIG to get an Oracle Database 11gR2 RAC cluster running inside a virtual machine. For more information: RAC attack at Oracle Open World (Pythian Blog) RAC Attack - Oracle Cluster Database at Home/Events (WikiBooks) Oracle Social Network Developer Challenge Office Hours (4:00pm - 8:00pm)Meet the people behind Oracle Social Network. Tuesday (Lounge hours: 8:00am - 7:00pm) RAC Attack (9:00am - 1:00pm) Oracle Social Network Developer Challenge Office Hours (4:30pm - 8:00pm) Oracle Database / Oracle Fusion Middleware Tweet Meet (4:30pm - 6:00pm) Free as in beer! Oracle Database and Oracle Fusion Middleware tweeters, gather in the OTN Lounge for refreshments and conversation with fellow tweeters and Oracle Database and Middleware experts. Wednesday (Lounge Hours: 8:00am - 6:00pm) RAC Attack (9:00am - 1:00pm) Oracle Social Network Developer Challenge Judging (4:00pm - 6:00pm) ADF Oracle ADF / Oracle Fusion Middleware Meet-up (4:30pm - 5:30pm) Join other Oracle ADF and Oracle Fusion Middleware developers and meet the product managers and engineers behind Oracle ADF, ADF Mobile, and ADF Essentials. Did we mention free beer? Thursday (Lounge Hours: 8:00am - 2:00pm) RAC Attack (9:00am - 1:00pm) The OTN Lounge is located in the Howard St .tent, located by no small coincidence on Howard St. between 3rd and 4th, directly between Moscone North and Moscone South. An Oracle OpenWorld or JavaOne conference badge is required for access to the OTN Lounge.

    Read the article

  • SQL Server – Learning SQL Server Performance: Indexing Basics – Video

    - by pinaldave
    Today I remember one of my older cartoon years ago created for Indexing and Performance. Every single time when Performance is discussed, Indexes are mentioned along with it. In recent times, data and application complexity is continuously growing.  The demand for faster query response, performance, and scalability by organizations is increasing and developers and DBAs need to now write efficient code to achieve this. DBA and Developers A DBA’s role is critical, because a production environment has to run 24×7, hence maintenance, trouble shooting, and quick resolutions are the need of the hour.  The first baby step into any performance tuning exercise in SQL Server involves creating, analysing, and maintaining indexes. Though we have learnt indexing concepts from our college days, indexing implementation inside SQL Server can vary.  Understanding this behaviour and designing our applications appropriately will make sure the application is performed to its highest potential. Video Learning Vinod Kumar and myself we often thought about this and realized that practical understanding of the indexes is very important. One can not master every single aspects of the index. However there are some minimum expertise one should gain if performance is one of the concern. We decided to build a course which just addresses the practical aspects of the performance. In this course, we explored some of these indexing fundamentals and we elaborated on how SQL Server goes about using indexes.  At the end of this course of you will know the basic structure of indexes, practical insights into implementation, and maintenance tips and tricks revolving around indexes.  Finally, we will introduce SQL Server 2012 column store indexes.  We have refrained from discussing internal storage structure of the indexes but have taken a more practical, demo-oriented approach to explain these core concepts. Course Outline Here are salient topics of the course. We have explained every single concept along with a practical demonstration. Additionally shared our personal scripts along with the same. Introduction Fundamentals of Indexing Index Fundamentals Index Fundamentals – Visual Representation Practical Indexing Implementation Techniques Primary Key Over Indexing Duplicate Index Clustered Index Unique Index Included Columns Filtered Index Disabled Index Index Maintenance and Defragmentation Introduction to Columnstore Index Indexing Practical Performance Tips and Tricks Index and Page Types Index and Non Deterministic Columns Index and SET Values Importance of Clustered Index Effect of Compression and Fillfactor Index and Functions Dynamic Management Views (DMV) – Fillfactor Table Scan, Index Scan and Index Seek Index and Order of Columns Final Checklist: Index and Performance Well, we believe we have done our part, now waiting for your comments and feedback. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology, Video

    Read the article

  • SQL SERVER – Fix : Error : 3117 : The log or differential backup cannot be restored because no files

    - by pinaldave
    I received the following email from one of my readers. Dear Pinal, I am new to SQL Server and our regular DBA is on vacation. Our production database had some problem and I have just restored full database backup to production server. When I try to apply log back I am getting following error. I am sure, this is valid log backup file. Screenshot is attached. [Few other details regarding server/ip address removed] Msg 3117, Level 16, State 1, Line 1 The log or differential backup cannot be restored because no files are ready to roll forward. Msg 3013, Level 16, State 1, Line 1 RESTORE LOG is terminating abnormally. Screenshot attached. [Removed as it contained live IP address] Please help immediately. Well I have answered this question in my earlier post, 2 years ago, over here SQL SERVER – Fix : Error : Msg 3117, Level 16, State 4 The log or differential backup cannot be restored because no files are ready to rollforward. However, I will try to explain it a little more this time. For SQL Server database to be used it should in online state. There are multiple states of SQL Server Database. ONLINE (Available – online for data) OFFLINE RESTORING RECOVERING RECOVERY PENDING SUSPECT EMERGENCY (Limited Availability) If the database is online, it means it is active and in operational mode. It will not make sense to apply further log from backup if the operations have continued on this database. The common practice during the backup restore process is to specify the keyword RECOVERY when the database is restored. When RECOVERY keyword is specified, the SQL Server brings back the database online and will not accept any further log backups. However, if you want to restore more than one backup files, i.e. after restoring the full back up if you want to apply further differential or log backup you cannot do that when database is online and already active. You need to have your database in the state where it can further accept the backup data and not the online data request. If the SQL Server is online and also accepts database backup file, then there can be data inconsistency. This is the reason that when there are more than one database backup files to be restored, one has to restore the database with NO RECOVERY keyword in the RESTORE operation. I suggest you all to read one more post written by me earlier. In this post, I explained the time line with image and graphic SQL SERVER – Backup Timeline and Understanding of Database Restore Process in Full Recovery Model. Sample Code for reference: RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksFull.bak' WITH NORECOVERY; RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksDiff.bak' WITH RECOVERY; In this post, I am not trying to cover complete backup and recovery. I am just attempting to address one type of error and its resolution. Please test these scenarios on the development server. Playing with live database backup and recovery is always very crucial and needs to be properly planned. Leave a comment here if you need help with this subject. Similar Post: SQL SERVER – Restore Sequence and Understanding NORECOVERY and RECOVERY Note: We will cover Standby Server maintenance and Recovery in another blog post and it is intentionally, not covered this post. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL SERVER – Copy Data from One Table to Another Table – SQL in Sixty Seconds #031 – Video

    - by pinaldave
    Copy data from one table to another table is one of the most requested questions on forums, Facebook and Twitter. The question has come in many formats and there are places I have seen developers are using cursor instead of this direct method. Earlier I have written the similar article a few years ago - SQL SERVER – Insert Data From One Table to Another Table – INSERT INTO SELECT – SELECT INTO TABLE. The article has been very popular and I have received many interesting and constructive comments. However there were two specific comments keep on ending up on my mailbox. 1) SQL Server AdventureWorks Samples Database does not have table I used in the example 2) If there is a video tutorial of the same example. After carefully thinking I decided to build a new set of the scripts for the example which are very similar to the old one as well video tutorial of the same. There was no better place than our SQL in Sixty Second Series to cover this interesting small concept. Let me know what you think of this video. Here is the updated script. -- Method 1 : INSERT INTO SELECT USE AdventureWorks2012 GO ----Create TestTable CREATE TABLE TestTable (FirstName VARCHAR(100), LastName VARCHAR(100)) ----INSERT INTO TestTable using SELECT INSERT INTO TestTable (FirstName, LastName) SELECT FirstName, LastName FROM Person.Person WHERE EmailPromotion = 2 ----Verify that Data in TestTable SELECT FirstName, LastName FROM TestTable ----Clean Up Database DROP TABLE TestTable GO --------------------------------------------------------- --------------------------------------------------------- -- Method 2 : SELECT INTO USE AdventureWorks2012 GO ----Create new table and insert into table using SELECT INSERT SELECT FirstName, LastName INTO TestTable FROM Person.Person WHERE EmailPromotion = 2 ----Verify that Data in TestTable SELECT FirstName, LastName FROM TestTable ----Clean Up Database DROP TABLE TestTable GO Related Tips in SQL in Sixty Seconds: SQL SERVER – Insert Data From One Table to Another Table – INSERT INTO SELECT – SELECT INTO TABLE Powershell – Importing CSV File Into Database – Video SQL SERVER – 2005 – Export Data From SQL Server 2005 to Microsoft Excel Datasheet SQL SERVER – Import CSV File into Database Table Using SSIS SQL SERVER – Import CSV File Into SQL Server Using Bulk Insert – Load Comma Delimited File Into SQL Server SQL SERVER – 2005 – Generate Script with Data from Database – Database Publishing Wizard What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • SQL SERVER – Understanding ALTER INDEX ALL REBUILD with Disabled Clustered Index

    - by pinaldave
    This blog is in response to the ongoing communication with the reader who had earlier asked the question of SQL SERVER – Disable Clustered Index and Data Insert. The same reader has asked me the difference between ALTER INDEX ALL REBUILD and ALTER INDEX REBUILD along with disabled clustered index. Instead of writing a big theory, we will go over the demo right away. Here are the steps that we intend to follow. 1) Create Clustered and Nonclustered Index 2) Disable Clustered and Nonclustered Index 3) Enable – a) All Indexes, b) Clustered Index USE tempdb GO -- Drop Table if Exists IF EXISTS (SELECT * FROM sys.objects WHERE OBJECT_ID = OBJECT_ID(N'[dbo].[TableName]') AND type IN (N'U')) DROP TABLE [dbo].[TableName] GO -- Create Table CREATE TABLE [dbo].[TableName]( [ID] [int] NOT NULL, [FirstCol] [varchar](50) NULL ) GO -- Create Clustered Index ALTER TABLE [TableName] ADD CONSTRAINT [PK_TableName] PRIMARY KEY CLUSTERED ([ID] ASC) GO -- Create Nonclustered Index CREATE UNIQUE NONCLUSTERED INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] ([FirstCol] ASC) GO -- Check that all the indexes are enabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Now let us disable both the indexes. -- Disable Indexes -- Disable Nonclustered Index ALTER INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] DISABLE GO -- Disable Clustered Index ALTER INDEX [PK_TableName] ON [dbo].[TableName] DISABLE GO -- Check that all the indexes are disabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Next, let us rebuild all the indexes and see the output. -- Test 1: ALTER INDEX ALL REBUILD -- Rebuliding should work fine ALTER INDEX ALL ON [dbo].[TableName] REBUILD GO -- Check that all the indexes are enabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Now, once again disable indexes for the second test. -- Disable Indexes -- Disable Nonclustered Index ALTER INDEX [IX_NonClustered_TableName] ON [dbo].[TableName] DISABLE GO -- Disable Clustered Index ALTER INDEX [PK_TableName] ON [dbo].[TableName] DISABLE GO -- Check that all the indexes are disabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Next, let us build only the clustered index and see the output of all the indexes. -- Test 2: ALTER INDEX REBUILD -- Rebuliding should work fine ALTER INDEX [PK_TableName] ON [dbo].[TableName] REBUILD GO -- Check that only clustered index is enabled SELECT OBJECT_NAME(OBJECT_ID), Name, type_desc, is_disabled FROM sys.indexes WHERE OBJECT_NAME(OBJECT_ID) = 'TableName' GO Let us do final clean up. -- Clean up DROP TABLE [TableName] GO From the example, it is very clear that if you have built only clustered index when the nonclustered index is disabled, it still remains disabled. Do let me know if the idea is clear. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Index, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Raspberry Pi entrance signed backed by Umbraco - Part 1

    - by Chris Houston
    Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • An Introduction to Meteor

    - by Stephen.Walther
    The goal of this blog post is to give you a brief introduction to Meteor which is a framework for building Single Page Apps. In this blog entry, I provide a walkthrough of building a simple Movie database app. What is special about Meteor? Meteor has two jaw-dropping features: Live HTML – If you make any changes to the HTML, CSS, JavaScript, or data on the server then every client shows the changes automatically without a browser refresh. For example, if you change the background color of a page to yellow then every open browser will show the new yellow background color without a refresh. Or, if you add a new movie to a collection of movies, then every open browser will display the new movie automatically. With Live HTML, users no longer need a refresh button. Changes to an application happen everywhere automatically without any effort. The Meteor framework handles all of the messy details of keeping all of the clients in sync with the server for you. Latency Compensation – When you modify data on the client, these modifications appear as if they happened on the server without any delay. For example, if you create a new movie then the movie appears instantly. However, that is all an illusion. In the background, Meteor updates the database with the new movie. If, for whatever reason, the movie cannot be added to the database then Meteor removes the movie from the client automatically. Latency compensation is extremely important for creating a responsive web application. You want the user to be able to make instant modifications in the browser and the framework to handle the details of updating the database without slowing down the user. Installing Meteor Meteor is licensed under the open-source MIT license and you can start building production apps with the framework right now. Be warned that Meteor is still in the “early preview” stage. It has not reached a 1.0 release. According to the Meteor FAQ, Meteor will reach version 1.0 in “More than a month, less than a year.” Don’t be scared away by that. You should be aware that, unlike most open source projects, Meteor has financial backing. The Meteor project received an $11.2 million round of financing from Andreessen Horowitz. So, it would be a good bet that this project will reach the 1.0 mark. And, if it doesn’t, the framework as it exists right now is still very powerful. Meteor runs on top of Node.js. You write Meteor apps by writing JavaScript which runs both on the client and on the server. You can build Meteor apps on Windows, Mac, or Linux (Although the support for Windows is still officially unofficial). If you want to install Meteor on Windows then download the MSI from the following URL: http://win.meteor.com/ If you want to install Meteor on Mac/Linux then run the following CURL command from your terminal: curl https://install.meteor.com | /bin/sh Meteor will install all of its dependencies automatically including Node.js. However, I recommend that you install Node.js before installing Meteor by installing Node.js from the following address: http://nodejs.org/ If you let Meteor install Node.js then Meteor won’t install NPM which is the standard package manager for Node.js. If you install Node.js and then you install Meteor then you get NPM automatically. Creating a New Meteor App To get a sense of how Meteor works, I am going to walk through the steps required to create a simple Movie database app. Our app will display a list of movies and contain a form for creating a new movie. The first thing that we need to do is create our new Meteor app. Open a command prompt/terminal window and execute the following command: Meteor create MovieApp After you execute this command, you should see something like the following: Follow the instructions: execute cd MovieApp to change to your MovieApp directory, and run the meteor command. Executing the meteor command starts Meteor on port 3000. Open up your favorite web browser and navigate to http://localhost:3000 and you should see the default Meteor Hello World page: Open up your favorite development environment to see what the Meteor app looks like. Open the MovieApp folder which we just created. Here’s what the MovieApp looks like in Visual Studio 2012: Notice that our MovieApp contains three files named MovieApp.css, MovieApp.html, and MovieApp.js. In other words, it contains a Cascading Style Sheet file, an HTML file, and a JavaScript file. Just for fun, let’s see how the Live HTML feature works. Open up multiple browsers and point each browser at http://localhost:3000. Now, open the MovieApp.html page and modify the text “Hello World!” to “Hello Cruel World!” and save the change. The text in all of the browsers should update automatically without a browser refresh. Pretty amazing, right? Controlling Where JavaScript Executes You write a Meteor app using JavaScript. Some of the JavaScript executes on the client (the browser) and some of the JavaScript executes on the server and some of the JavaScript executes in both places. For a super simple app, you can use the Meteor.isServer and Meteor.isClient properties to control where your JavaScript code executes. For example, the following JavaScript contains a section of code which executes on the server and a section of code which executes in the browser: if (Meteor.isClient) { console.log("Hello Browser!"); } if (Meteor.isServer) { console.log("Hello Server!"); } console.log("Hello Browser and Server!"); When you run the app, the message “Hello Browser!” is written to the browser JavaScript console. The message “Hello Server!” is written to the command/terminal window where you ran Meteor. Finally, the message “Hello Browser and Server!” is execute on both the browser and server and the message appears in both places. For simple apps, using Meteor.isClient and Meteor.isServer to control where JavaScript executes is fine. For more complex apps, you should create separate folders for your server and client code. Here are the folders which you can use in a Meteor app: · client – This folder contains any JavaScript which executes only on the client. · server – This folder contains any JavaScript which executes only on the server. · common – This folder contains any JavaScript code which executes on both the client and server. · lib – This folder contains any JavaScript files which you want to execute before any other JavaScript files. · public – This folder contains static application assets such as images. For the Movie App, we need the client, server, and common folders. Delete the existing MovieApp.js, MovieApp.html, and MovieApp.css files. We will create new files in the right locations later in this walkthrough. Combining HTML, CSS, and JavaScript Files Meteor combines all of your JavaScript files, and all of your Cascading Style Sheet files, and all of your HTML files automatically. If you want to create one humongous JavaScript file which contains all of the code for your app then that is your business. However, if you want to build a more maintainable application, then you should break your JavaScript files into many separate JavaScript files and let Meteor combine them for you. Meteor also combines all of your HTML files into a single file. HTML files are allowed to have the following top-level elements: <head> — All <head> files are combined into a single <head> and served with the initial page load. <body> — All <body> files are combined into a single <body> and served with the initial page load. <template> — All <template> files are compiled into JavaScript templates. Because you are creating a single page app, a Meteor app typically will contain a single HTML file for the <head> and <body> content. However, a Meteor app typically will contain several template files. In other words, all of the interesting stuff happens within the <template> files. Displaying a List of Movies Let me start building the Movie App by displaying a list of movies. In order to display a list of movies, we need to create the following four files: · client\movies.html – Contains the HTML for the <head> and <body> of the page for the Movie app. · client\moviesTemplate.html – Contains the HTML template for displaying the list of movies. · client\movies.js – Contains the JavaScript for supplying data to the moviesTemplate. · server\movies.js – Contains the JavaScript for seeding the database with movies. After you create these files, your folder structure should looks like this: Here’s what the client\movies.html file looks like: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} </body>   Notice that it contains <head> and <body> top-level elements. The <body> element includes the moviesTemplate with the syntax {{> moviesTemplate }}. The moviesTemplate is defined in the client/moviesTemplate.html file: <template name="moviesTemplate"> <ul> {{#each movies}} <li> {{title}} </li> {{/each}} </ul> </template> By default, Meteor uses the Handlebars templating library. In the moviesTemplate above, Handlebars is used to loop through each of the movies using {{#each}}…{{/each}} and display the title for each movie using {{title}}. The client\movies.js JavaScript file is used to bind the moviesTemplate to the Movies collection on the client. Here’s what this JavaScript file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; The Movies collection is a client-side proxy for the server-side Movies database collection. Whenever you want to interact with the collection of Movies stored in the database, you use the Movies collection instead of communicating back to the server. The moviesTemplate is bound to the Movies collection by assigning a function to the Template.moviesTemplate.movies property. The function simply returns all of the movies from the Movies collection. The final file which we need is the server-side server\movies.js file: // Declare server Movies collection Movies = new Meteor.Collection("movies"); // Seed the movie database with a few movies Meteor.startup(function () { if (Movies.find().count() == 0) { Movies.insert({ title: "Star Wars", director: "Lucas" }); Movies.insert({ title: "Memento", director: "Nolan" }); Movies.insert({ title: "King Kong", director: "Jackson" }); } }); The server\movies.js file does two things. First, it declares the server-side Meteor Movies collection. When you declare a server-side Meteor collection, a collection is created in the MongoDB database associated with your Meteor app automatically (Meteor uses MongoDB as its database automatically). Second, the server\movies.js file seeds the Movies collection (MongoDB collection) with three movies. Seeding the database gives us some movies to look at when we open the Movies app in a browser. Creating New Movies Let me modify the Movies Database App so that we can add new movies to the database of movies. First, I need to create a new template file – named client\movieForm.html – which contains an HTML form for creating a new movie: <template name="movieForm"> <fieldset> <legend>Add New Movie</legend> <form> <div> <label> Title: <input id="title" /> </label> </div> <div> <label> Director: <input id="director" /> </label> </div> <div> <input type="submit" value="Add Movie" /> </div> </form> </fieldset> </template> In order for the new form to show up, I need to modify the client\movies.html file to include the movieForm.html template. Notice that I added {{> movieForm }} to the client\movies.html file: <head> <title>My Movie App</title> </head> <body> <h1>Movies</h1> {{> moviesTemplate }} {{> movieForm }} </body> After I make these modifications, our Movie app will display the form: The next step is to handle the submit event for the movie form. Below, I’ve modified the client\movies.js file so that it contains a handler for the submit event raised when you submit the form contained in the movieForm.html template: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Movies.insert(newMovie); } }; The Template.movieForm.events property contains an event map which maps event names to handlers. In this case, I am mapping the form submit event to an anonymous function which handles the event. In the event handler, I am first preventing a postback by calling e.preventDefault(). This is a single page app, no postbacks are allowed! Next, I am grabbing the new movie from the HTML form. I’m taking advantage of the template find() method to retrieve the form field values. Finally, I am calling Movies.insert() to insert the new movie into the Movies collection. Here, I am explicitly inserting the new movie into the client-side Movies collection. Meteor inserts the new movie into the server-side Movies collection behind the scenes. When Meteor inserts the movie into the server-side collection, the new movie is added to the MongoDB database associated with the Movies app automatically. If server-side insertion fails for whatever reasons – for example, your internet connection is lost – then Meteor will remove the movie from the client-side Movies collection automatically. In other words, Meteor takes care of keeping the client Movies collection and the server Movies collection in sync. If you open multiple browsers, and add movies, then you should notice that all of the movies appear on all of the open browser automatically. You don’t need to refresh individual browsers to update the client-side Movies collection. Meteor keeps everything synchronized between the browsers and server for you. Removing the Insecure Module To make it easier to develop and debug a new Meteor app, by default, you can modify the database directly from the client. For example, you can delete all of the data in the database by opening up your browser console window and executing multiple Movies.remove() commands. Obviously, enabling anyone to modify your database from the browser is not a good idea in a production application. Before you make a Meteor app public, you should first run the meteor remove insecure command from a command/terminal window: Running meteor remove insecure removes the insecure package from the Movie app. Unfortunately, it also breaks our Movie app. We’ll get an “Access denied” error in our browser console whenever we try to insert a new movie. No worries. I’ll fix this issue in the next section. Creating Meteor Methods By taking advantage of Meteor Methods, you can create methods which can be invoked on both the client and the server. By taking advantage of Meteor Methods you can: 1. Perform form validation on both the client and the server. For example, even if an evil hacker bypasses your client code, you can still prevent the hacker from submitting an invalid value for a form field by enforcing validation on the server. 2. Simulate database operations on the client but actually perform the operations on the server. Let me show you how we can modify our Movie app so it uses Meteor Methods to insert a new movie. First, we need to create a new file named common\methods.js which contains the definition of our Meteor Methods: Meteor.methods({ addMovie: function (newMovie) { // Perform form validation if (newMovie.title == "") { throw new Meteor.Error(413, "Missing title!"); } if (newMovie.director == "") { throw new Meteor.Error(413, "Missing director!"); } // Insert movie (simulate on client, do it on server) return Movies.insert(newMovie); } }); The addMovie() method is called from both the client and the server. This method does two things. First, it performs some basic validation. If you don’t enter a title or you don’t enter a director then an error is thrown. Second, the addMovie() method inserts the new movie into the Movies collection. When called on the client, inserting the new movie into the Movies collection just updates the collection. When called on the server, inserting the new movie into the Movies collection causes the database (MongoDB) to be updated with the new movie. You must add the common\methods.js file to the common folder so it will get executed on both the client and the server. Our folder structure now looks like this: We actually call the addMovie() method within our client code in the client\movies.js file. Here’s what the updated file looks like: // Declare client Movies collection Movies = new Meteor.Collection("movies"); // Bind moviesTemplate to Movies collection Template.moviesTemplate.movies = function () { return Movies.find(); }; // Handle movieForm events Template.movieForm.events = { 'submit': function (e, tmpl) { // Don't postback e.preventDefault(); // create the new movie var newMovie = { title: tmpl.find("#title").value, director: tmpl.find("#director").value }; // add the movie to the db Meteor.call( "addMovie", newMovie, function (err, result) { if (err) { alert("Could not add movie " + err.reason); } } ); } }; The addMovie() method is called – on both the client and the server – by calling the Meteor.call() method. This method accepts the following parameters: · The string name of the method to call. · The data to pass to the method (You can actually pass multiple params for the data if you like). · A callback function to invoke after the method completes. In the JavaScript code above, the addMovie() method is called with the new movie retrieved from the HTML form. The callback checks for an error. If there is an error then the error reason is displayed in an alert (please don’t use alerts for validation errors in a production app because they are ugly!). Summary The goal of this blog post was to provide you with a brief walk through of a simple Meteor app. I showed you how you can create a simple Movie Database app which enables you to display a list of movies and create new movies. I also explained why it is important to remove the Meteor insecure package from a production app. I showed you how to use Meteor Methods to insert data into the database instead of doing it directly from the client. I’m very impressed with the Meteor framework. The support for Live HTML and Latency Compensation are required features for many real world Single Page Apps but implementing these features by hand is not easy. Meteor makes it easy.

    Read the article

  • IIS 7&rsquo;s Sneaky Secret to Get COM-InterOp to Run

    - by David Hoerster
    Originally posted on: http://geekswithblogs.net/DavidHoerster/archive/2013/06/17/iis-7rsquos-sneaky-secret-to-get-com-interop-to-run.aspxIf you’re like me, you don’t really do a lot with COM components these days.  For me, I’ve been ‘lucky’ to stay in the managed world for the past 6 or 7 years. Until last week. I’m running a project to upgrade a web interface to an older COM-based application.  The old web interface is all classic ASP and lots of tables, in-line styles and a bunch of other late 90’s and early 2000’s goodies.  So in addition to updating the UI to be more modern looking and responsive, I decided to give the server side an update, too.  So I built some COM-InterOp DLL’s (easily through VS2012’s Add Reference feature…nothing new here) and built a test console line app to make sure the COM DLL’s were actually built according to the COM spec.  There’s a document management system that I’m thinking of whose COM DLLs were not proper COM DLLs and crashed and burned every time .NET tried to call them through a COM-InterOp layer. Anyway, my test app worked like a champ and I felt confident that I could build a nice façade around the COM DLL’s and wrap some functionality internally and only expose to my users/clients what they really needed. So I did this, built some tests and also built a test web app to make sure everything worked great.  It did.  It ran fine in IIS Express via Visual Studio 2012, and the timings were very close to the pure Classic ASP calls, so there wasn’t much overhead involved going through the COM-InterOp layer. You know where this is going, don’t you? So I deployed my test app to a DEV server running IIS 7.5.  When I went to my first test page that called the COM-InterOp layer, I got this pretty message: Retrieving the COM class factory for component with CLSID {81C08CAE-1453-11D4-BEBC-00500457076D} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). It worked as a console app and while running under IIS Express, so it must be permissions, right?  I gave every account I could think of all sorts of COM+ rights and nothing, nada, zilch! Then I came across this question on Experts Exchange, and at the bottom of the page, someone mentioned that the app pool should be running to allow 32-bit apps to run.  Oh yeah, my machine is 64-bit; these COM DLL’s I’m using are old and are definitely 32-bit.  I didn’t check for that and didn’t even think about that.  But I went ahead and looked at the app pool that my web site was running under and what did I see?  Yep, select your app pool in IIS 7.x, click on Advanced Settings and check for “Enable 32-bit Applications”. I went ahead and set it to True and my test application suddenly worked. Hope this helps somebody out there from pulling out your hair.

    Read the article

  • Talks Submitted for Ann Arbor Day of .NET 2010

    - by PSteele
    Just submitted my session abstracts for Ann Arbor's Day of .NET 2010.   Getting up to speed with .NET 3.5 -- Just in time for 4.0! Yes, C# 4.0 is just around the corner.  But if you haven't had the chance to use C# 3.5 extensively, this session will start from the ground up with the new features of 3.5.  We'll assume everyone is coming from C# 2.0.  This session will show you the details of extension methods, partial methods and more.  We'll also show you how LINQ -- Language Integrated Query -- can help decrease your development time and increase your code's readability.  If time permits, we'll look at some .NET 4.0 features, but the goal is to get you up to speed on .NET 3.5.   Go Ahead and Mock Me! When testing specific parts of your application, there can be a lot of external dependencies required to make your tests work.  Writing fake or mock objects that act as stand-ins for the real dependencies can waste a lot of time.  This is where mocking frameworks come in.  In this session, Patrick Steele will introduce you to Rhino Mocks, a popular mocking framework for .NET.  You'll see how a mocking framework can make writing unit tests easier and leads to less brittle unit tests.   Inversion of Control: Who's got control and why is it being inverted? No doubt you've heard of "Inversion of Control".  If not, maybe you've heard the term "Dependency Injection"?  The two usually go hand-in-hand.  Inversion of Control (IoC) along with Dependency Injection (DI) helps simplify the connections and lifetime of all of the dependent objects in the software you write.  In this session, Patrick Steele will introduce you to the concepts of IoC and DI and will show you how to use a popular IoC container (Castle Windsor) to help simplify the way you build software and how your objects interact with each other. If you're interested in speaking, hurry up and get your submissions in!  The deadline is Monday, April 5th! Technorati Tags: .NET,Ann Arbor,Day of .NET

    Read the article

  • [MINI HOW-TO] Change the Default Color Scheme in Office 2010

    - by Mysticgeek
    Like in Office 2007 the default color scheme for 2010 is blue. If you are not a fan of it, here we show you how to change it to silver or black. In this example we are using Microsoft Word, but it works the same way in Excel, Outlook, and PowerPoint as well. Once you change the color scheme in one Office application, it will change it for all of the other apps in the suite. Change Color Scheme To change the color scheme click on the File tab to access Backstage View and click on Options. In Word Options the General section should open by default…use the dropdown menu next to Color Scheme to change it to Silver, Blue, or Black then click OK. Here is what Black looks like…who knows why Microsoft decided to leave the blue around the edges. This is the default Blue color scheme… And finally we take a look at the Silver color scheme in Excel… That is all there is to it! It would be nice if they would incorporate other color schemes to Office 2010, as some of you may not be happy with only three choices. If you’re using Office 2007 check out our article on how to change the color scheme in it. Also, The Geek has a cool article on how to set the Color Scheme of Office 2007 with a quick registry hack. Similar Articles Productive Geek Tips Set the Office 2007 Color Scheme With a Quick Registry HackChange The Default Color Scheme In Office 2007Maximize Space by "Auto-Hiding" the Ribbon in Office 2007How To Personalize the Windows Command PromptOrganize & Group Your Tabs in Firefox the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Scrum in 5 Minutes

    - by Stephen.Walther
    The goal of this blog entry is to explain the basic concepts of Scrum in less than five minutes. You learn how Scrum can help a team of developers to successfully complete a complex software project. Product Backlog and the Product Owner Imagine that you are part of a team which needs to create a new website – for example, an e-commerce website. You have an overwhelming amount of work to do. You need to build (or possibly buy) a shopping cart, install an SSL certificate, create a product catalog, create a Facebook page, and at least a hundred other things that you have not thought of yet. According to Scrum, the first thing you should do is create a list. Place the highest priority items at the top of the list and the lower priority items lower in the list. For example, creating the shopping cart and buying the domain name might be high priority items and creating a Facebook page might be a lower priority item. In Scrum, this list is called the Product Backlog. How do you prioritize the items in the Product Backlog? Different stakeholders in the project might have different priorities. Gary, your division VP, thinks that it is crucial that the e-commerce site has a mobile app. Sally, your direct manager, thinks taking advantage of new HTML5 features is much more important. Multiple people are pulling you in different directions. According to Scrum, it is important that you always designate one person, and only one person, as the Product Owner. The Product Owner is the person who decides what items should be added to the Product Backlog and the priority of the items in the Product Backlog. The Product Owner could be the customer who is paying the bills, the project manager who is responsible for delivering the project, or a customer representative. The critical point is that the Product Owner must always be a single person and that single person has absolute authority over the Product Backlog. Sprints and the Sprint Backlog So now the developer team has a prioritized list of items and they can start work. The team starts implementing the first item in the Backlog — the shopping cart — and the team is making good progress. Unfortunately, however, half-way through the work of implementing the shopping cart, the Product Owner changes his mind. The Product Owner decides that it is much more important to create the product catalog before the shopping cart. With some frustration, the team switches their developmental efforts to focus on implementing the product catalog. However, part way through completing this work, once again the Product Owner changes his mind about the highest priority item. Getting work done when priorities are constantly shifting is frustrating for the developer team and it results in lower productivity. At the same time, however, the Product Owner needs to have absolute authority over the priority of the items which need to get done. Scrum solves this conflict with the concept of Sprints. In Scrum, a developer team works in Sprints. At the beginning of a Sprint the developers and the Product Owner agree on the items from the backlog which they will complete during the Sprint. This subset of items from the Product Backlog becomes the Sprint Backlog. During the Sprint, the Product Owner is not allowed to change the items in the Sprint Backlog. In other words, the Product Owner cannot shift priorities on the developer team during the Sprint. Different teams use Sprints of different lengths such as one month Sprints, two-week Sprints, and one week Sprints. For high-stress, time critical projects, teams typically choose shorter sprints such as one week sprints. For more mature projects, longer one month sprints might be more appropriate. A team can pick whatever Sprint length makes sense for them just as long as the team is consistent. You should pick a Sprint length and stick with it. Daily Scrum During a Sprint, the developer team needs to have meetings to coordinate their work on completing the items in the Sprint Backlog. For example, the team needs to discuss who is working on what and whether any blocking issues have been discovered. Developers hate meetings (well, sane developers hate meetings). Meetings take developers away from their work of actually implementing stuff as opposed to talking about implementing stuff. However, a developer team which never has meetings and never coordinates their work also has problems. For example, Fred might get stuck on a programming problem for days and never reach out for help even though Tom (who sits in the cubicle next to him) has already solved the very same problem. Or, both Ted and Fred might have started working on the same item from the Sprint Backlog at the same time. In Scrum, these conflicting needs – limiting meetings but enabling team coordination – are resolved with the idea of the Daily Scrum. The Daily Scrum is a meeting for coordinating the work of the developer team which happens once a day. To keep the meeting short, each developer answers only the following three questions: 1. What have you done since yesterday? 2. What do you plan to do today? 3. Any impediments in your way? During the Daily Scrum, developers are not allowed to talk about issues with their cat, do demos of their latest work, or tell heroic stories of programming problems overcome. The meeting must be kept short — typically about 15 minutes. Issues which come up during the Daily Scrum should be discussed in separate meetings which do not involve the whole developer team. Stories and Tasks Items in the Product or Sprint Backlog – such as building a shopping cart or creating a Facebook page – are often referred to as User Stories or Stories. The Stories are created by the Product Owner and should represent some business need. Unlike the Product Owner, the developer team needs to think about how a Story should be implemented. At the beginning of a Sprint, the developer team takes the Stories from the Sprint Backlog and breaks the stories into tasks. For example, the developer team might take the Create a Shopping Cart story and break it into the following tasks: · Enable users to add and remote items from shopping cart · Persist the shopping cart to database between visits · Redirect user to checkout page when Checkout button is clicked During the Daily Scrum, members of the developer team volunteer to complete the tasks required to implement the next Story in the Sprint Backlog. When a developer talks about what he did yesterday or plans to do tomorrow then the developer should be referring to a task. Stories are owned by the Product Owner and a story is all about business value. In contrast, the tasks are owned by the developer team and a task is all about implementation details. A story might take several days or weeks to complete. A task is something which a developer can complete in less than a day. Some teams get lazy about breaking stories into tasks. Neglecting to break stories into tasks can lead to “Never Ending Stories” If you don’t break a story into tasks, then you can’t know how much of a story has actually been completed because you don’t have a clear idea about the implementation steps required to complete the story. Scrumboard During the Daily Scrum, the developer team uses a Scrumboard to coordinate their work. A Scrumboard contains a list of the stories for the current Sprint, the tasks associated with each Story, and the state of each task. The developer team uses the Scrumboard so everyone on the team can see, at a glance, what everyone is working on. As a developer works on a task, the task moves from state to state and the state of the task is updated on the Scrumboard. Common task states are ToDo, In Progress, and Done. Some teams include additional task states such as Needs Review or Needs Testing. Some teams use a physical Scrumboard. In that case, you use index cards to represent the stories and the tasks and you tack the index cards onto a physical board. Using a physical Scrumboard has several disadvantages. A physical Scrumboard does not work well with a distributed team – for example, it is hard to share the same physical Scrumboard between Boston and Seattle. Also, generating reports from a physical Scrumboard is more difficult than generating reports from an online Scrumboard. Estimating Stories and Tasks Stakeholders in a project, the people investing in a project, need to have an idea of how a project is progressing and when the project will be completed. For example, if you are investing in creating an e-commerce site, you need to know when the site can be launched. It is not enough to just say that “the project will be done when it is done” because the stakeholders almost certainly have a limited budget to devote to the project. The people investing in the project cannot determine the business value of the project unless they can have an estimate of how long it will take to complete the project. Developers hate to give estimates. The reason that developers hate to give estimates is that the estimates are almost always completely made up. For example, you really don’t know how long it takes to build a shopping cart until you finish building a shopping cart, and at that point, the estimate is no longer useful. The problem is that writing code is much more like Finding a Cure for Cancer than Building a Brick Wall. Building a brick wall is very straightforward. After you learn how to add one brick to a wall, you understand everything that is involved in adding a brick to a wall. There is no additional research required and no surprises. If, on the other hand, I assembled a team of scientists and asked them to find a cure for cancer, and estimate exactly how long it will take, they would have no idea. The problem is that there are too many unknowns. I don’t know how to cure cancer, I need to do a lot of research here, so I cannot even begin to estimate how long it will take. So developers hate to provide estimates, but the Product Owner and other product stakeholders, have a legitimate need for estimates. Scrum resolves this conflict by using the idea of Story Points. Different teams use different units to represent Story Points. For example, some teams use shirt sizes such as Small, Medium, Large, and X-Large. Some teams prefer to use Coffee Cup sizes such as Tall, Short, and Grande. Finally, some teams like to use numbers from the Fibonacci series. These alternative units are converted into a Story Point value. Regardless of the type of unit which you use to represent Story Points, the goal is the same. Instead of attempting to estimate a Story in hours (which is doomed to failure), you use a much less fine-grained measure of work. A developer team is much more likely to be able to estimate that a Story is Small or X-Large than the exact number of hours required to complete the story. So you can think of Story Points as a compromise between the needs of the Product Owner and the developer team. When a Sprint starts, the developer team devotes more time to thinking about the Stories in a Sprint and the developer team breaks the Stories into Tasks. In Scrum, you estimate the work required to complete a Story by using Story Points and you estimate the work required to complete a task by using hours. The difference between Stories and Tasks is that you don’t create a task until you are just about ready to start working on a task. A task is something that you should be able to create within a day, so you have a much better chance of providing an accurate estimate of the work required to complete a task than a story. Burndown Charts In Scrum, you use Burndown charts to represent the remaining work on a project. You use Release Burndown charts to represent the overall remaining work for a project and you use Sprint Burndown charts to represent the overall remaining work for a particular Sprint. You create a Release Burndown chart by calculating the remaining number of uncompleted Story Points for the entire Product Backlog every day. The vertical axis represents Story Points and the horizontal axis represents time. A Sprint Burndown chart is similar to a Release Burndown chart, but it focuses on the remaining work for a particular Sprint. There are two different types of Sprint Burndown charts. You can either represent the remaining work in a Sprint with Story Points or with task hours (the following image, taken from Wikipedia, uses hours). When each Product Backlog Story is completed, the Release Burndown chart slopes down. When each Story or task is completed, the Sprint Burndown chart slopes down. Burndown charts typically do not always slope down over time. As new work is added to the Product Backlog, the Release Burndown chart slopes up. If new tasks are discovered during a Sprint, the Sprint Burndown chart will also slope up. The purpose of a Burndown chart is to give you a way to track team progress over time. If, halfway through a Sprint, the Sprint Burndown chart is still climbing a hill then you know that you are in trouble. Team Velocity Stakeholders in a project always want more work done faster. For example, the Product Owner for the e-commerce site wants the website to launch before tomorrow. Developers tend to be overly optimistic. Rarely do developers acknowledge the physical limitations of reality. So Project stakeholders and the developer team often collude to delude themselves about how much work can be done and how quickly. Too many software projects begin in a state of optimism and end in frustration as deadlines zoom by. In Scrum, this problem is overcome by calculating a number called the Team Velocity. The Team Velocity is a measure of the average number of Story Points which a team has completed in previous Sprints. Knowing the Team Velocity is important during the Sprint Planning meeting when the Product Owner and the developer team work together to determine the number of stories which can be completed in the next Sprint. If you know the Team Velocity then you can avoid committing to do more work than the team has been able to accomplish in the past, and your team is much more likely to complete all of the work required for the next Sprint. Scrum Master There are three roles in Scrum: the Product Owner, the developer team, and the Scrum Master. I’v e already discussed the Product Owner. The Product Owner is the one and only person who maintains the Product Backlog and prioritizes the stories. I’ve also described the role of the developer team. The members of the developer team do the work of implementing the stories by breaking the stories into tasks. The final role, which I have not discussed, is the role of the Scrum Master. The Scrum Master is responsible for ensuring that the team is following the Scrum process. For example, the Scrum Master is responsible for making sure that there is a Daily Scrum meeting and that everyone answers the standard three questions. The Scrum Master is also responsible for removing (non-technical) impediments which the team might encounter. For example, if the team cannot start work until everyone installs the latest version of Microsoft Visual Studio then the Scrum Master has the responsibility of working with management to get the latest version of Visual Studio as quickly as possible. The Scrum Master can be a member of the developer team. Furthermore, different people can take on the role of the Scrum Master over time. The Scrum Master, however, cannot be the same person as the Product Owner. Using SonicAgile SonicAgile (SonicAgile.com) is an online tool which you can use to manage your projects using Scrum. You can use the SonicAgile Product Backlog to create a prioritized list of stories. You can estimate the size of the Stories using different Story Point units such as Shirt Sizes and Coffee Cup sizes. You can use SonicAgile during the Sprint Planning meeting to select the Stories that you want to complete during a particular Sprint. You can configure Sprints to be any length of time. SonicAgile calculates Team Velocity automatically and displays a warning when you add too many stories to a Sprint. In other words, it warns you when it thinks you are overcommitting in a Sprint. SonicAgile also includes a Scrumboard which displays the list of Stories selected for a Sprint and the tasks associated with each story. You can drag tasks from one task state to another. Finally, SonicAgile enables you to generate Release Burndown and Sprint Burndown charts. You can use these charts to view the progress of your team. To learn more about SonicAgile, visit SonicAgile.com. Summary In this post, I described many of the basic concepts of Scrum. You learned how a Product Owner uses a Product Backlog to create a prioritized list of tasks. I explained why work is completed in Sprints so the developer team can be more productive. I also explained how a developer team uses the daily scrum to coordinate their work. You learned how the developer team uses a Scrumboard to see, at a glance, who is working on what and the state of each task. I also discussed Burndown charts. You learned how you can use both Release and Sprint Burndown charts to track team progress in completing a project. Finally, I described the crucial role of the Scrum Master – the person who is responsible for ensuring that the rules of Scrum are being followed. My goal was not to describe all of the concepts of Scrum. This post was intended to be an introductory overview. For a comprehensive explanation of Scrum, I recommend reading Ken Schwaber’s book Agile Project Management with Scrum: http://www.amazon.com/Agile-Project-Management-Microsoft-Professional/dp/073561993X/ref=la_B001H6ODMC_1_1?ie=UTF8&qid=1345224000&sr=1-1

    Read the article

< Previous Page | 874 875 876 877 878 879 880 881 882 883 884 885  | Next Page >