Search Results

Search found 23515 results on 941 pages for 'zend view'.

Page 879/941 | < Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >

• SQLAuthority News – Technical Review of Learning at Koenig Solutions

  - by pinaldave

  Yesterday I finished my 3 days fast track in person learning of course End to End SQL Server Business Intelligence at Koenig Solutions. You can read my previous article over here regarding why am I learning SQL Server. Yesterday I blogged about my experience of arriving to Training Center and my induction with the center. The Training Days I had enrolled for three days training so my routine each of the three days was very much same. However, the content every day was different as I was learning something new every day. Let me describe a few of the interesting details of my daily routine. A Single Student Batch The best part of my training was that in my training batch, I am single student. Koenig is known to smaller batches and often they have single student batches as well. I was very much delighted to know that I will have dedicated access and attention from my trainer in my batch as I will be single student in my batch. In most of the labs I have observed there are no more than 4 students at any time. Prakash and Pinal 7:30 AM Breakfast Talk We all students gather at 7:30 in breakfast area. The best time of the day. I was the only Indian student in the group. The other students were from USA, Canada, Nigeria, Bhutan, Tanzania, and a few others from other countries. I immediately become the source of information and reference manual. Though the distance between Delhi and Bangalore is 2000+ KM I was considered as a local guy. 8:30 AMHeading to Training Center Every day without fail at 8:30 the van started from our accommodation to the training center. As mentioned in an earlier blog post the distance is about 5 minutes and we were able to reach at the location before 8:45. This gave us some time settle in before our class starts at 9:00 AM. 9:00 AM Order Lunch Food Well it may sound funny that we just had breakfast 30 minutes but the first thing everybody has to do is to order lunch as soon as the class starts. There is an online training portal to order food for the day. Everybody has to place their order early during the day so the food arrives on time during lunch time. Everybody can order whatever they want to order using an online ordering system. The options are plenty and everybody can order what they like. 9:05 AM Learning Starts After deciding the lunch we started the learning. I was very fortunate to have a very experienced trainer - Prakash Chheatry. Though I have never met him before I have heard a lot about Prakash. He is known as the top most SQL Server Trainer in India. His student list contains some of the very well known SQL Server Experts of the world and few of SQL Server “best seller” book authors. Learning continues till 1:00 PM with one tea-coffee break in between. 1:00 PM Lunch The lunch time is again the fun time. We all students get together in the afternoon and tell the stories of the world. Indeed the best part of the day beside learning new stuff. 4:55 PM Ready to Return We stop at 4:55 as at precisely 5:00 PM the van stops by the institute which takes us back to our accommodation. Trust me seriously long long day always but the amount of the learning is the win of the day. 7:30 PM Dinner Time After coming back to the accommodation I study till 7:30 and then rush for dinner. Dinner is world cuisine and deserts are really delicious. After dinner every day I have written a blog and retired early as the next day is always going to be busier than the present day. What did I learn As I mentioned earlier I know SQL Server fairly well. I had expressed the same in my conversation as well. This is the reason I was assigned a fairly senior trainer and we learned everything quite quickly. As I know quite a few things we went pretty fast in many topics. There were a few things, I wanted to learn in detail as well practice on the labs. We slowed down where we wanted and rush through the concepts where I was very comfortable. Here is the list of the things which we covered in action pack three days. Introduction to Business Intelligence (Intro) SQL Server Analysis Service (Theory and Lab) SQL Server Integration Service  (Theory and Lab) SQL Server Reporting Service  (Theory and Lab) SQL Server PowerPivot (Lab) UDM (Theory) SharePoint Concepts (Theory) Power View (Demo) Business Intelligence and Security (Discussion) Well, I was delighted that I was able to refresh lots of concepts during these three days. Thanks to my trainer and my friend who helped me to have a good learning experience. I believe all the learning  will help me in my growth and future career. With this I end my this experience. I am planning to have another online learning experience later this month. I will blog about my experience as I begin it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

  Read the article

• How-to filter table filter input to only allow numeric input

  - by frank.nimphius

  In a previous ADF Code Corner post, I explained how to change the table filter behavior by intercepting the query condition in a query filter. See sample #30 at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html In this OTN Harvest post I explain how to prevent users from providing invalid character entries as table filter criteria to avoid problems upon re-querying the table. In the example shown next, only numeric values are allowed for a table column filter. To create a table that allows data filtering, drag a View Object – or a data collection of a Web Service or JPA business service – from the DataControls panel and drop it as a table. Choose the Enable Filtering option in the Edit Table Columns dialog so the table renders with the column filter boxes displayed. The table filter fields are created using implicit af:inputText components that need to be customized for you to apply a custom filter input component, or to change the input behavior. To change the input filter, so only a defined set of input keys is allowed, you need to change the default filter field with your own af:inputText field to which you apply an af:clientListener tag that filters user keyboard entries. For this, in the Oracle JDeveloper visual editor, select the column which filter you want to change and expand the column node in the Oracle JDeveloper Structure Window. Part of the column definition is the Column facet node. Expand the facets so you see the filter facet entry. The filter facet is grayed out as there is no custom facet defined. In a next step, open theComponent Palette (ctrl+shift+P) and drag an Input Text component onto the facet. This demarks the first part in the filter customization. To make the custom filter component work, you need to map the af:inputText component value property to the ADF filter criteria that is exposed in the Expression Builder. Open the Expression Builder for the filter input component value property by clicking the arrow icon to its right. In the Expression Builder expand the JSP Objects | vs | filterCriteria node to select the attribute name represented by the table column. The vs entry is the name of a variable that is defined on the table and that grants you access to the table attributes. Now that the filter works as before – though using a custom filter input component – you can add the af:clientListener tag to your custom filter component – af:inputText – to call out to JavaScript when users type in the column filter field Point the client filter method property to a JavaScript function that you reference or add through using the af:resource tag and set the type property value to keyDown. <af:document id="d1">     <af:resource type="javascript" source="/js/filterHandler.js"/> … The filter definition looks as shown below <af:inputText label="Label 1" id="it1"                         value="#{vs.filterCriteria.Employe        <af:clientListener method="suppressCharacterInput"                                     type="keyDown"/> </af:inputText> The JavaScript code that you can use to either filter character inputs or numeric inputs is shown below. Just store this code in an external JavaScript (.js) file and reference it from the af:resource tag. //Allow numbers, cursor control keys and delete keys function suppressCharacterInput(evt) {     var _keyCode = evt.getKeyCode();     var _filterField = evt.getCurrentTarget();     var _oldValue = _filterField.getValue();     if (!((_keyCode < 57) ||(_keyCode > 96 && _keyCode < 105))) {         _filterField.setValue(_oldValue);         evt.cancel();     } } //Allow characters, cursor control keys and delete keys function suppressNumericInput(evt) {  var _keyCode = evt.getKeyCode();  var _filterField = evt.getCurrentTarget();  var _oldValue = _filterField.getValue();  //check for numbers  if ((_keyCode < 57 && _keyCode > 47) ||      (_keyCode > 96 && _keyCode < 105)){     _filterField.setValue(_oldValue);     evt.cancel();   } } But what if browsers don't allow JavaScript ? Don't worry about this. If browsers would not support JavaScript then ADF Faces as a whole would not work and you had a different problem.

  Read the article

• Dynamic Data Connections

  - by Tim Dexter

  I have had a long running email thread running between Dan and David over at Valspar and myself. They have built some impressive connectivity between their in house apps and BIP using web services. The crux of their problem has been that they have multiple databases that need the same report executed against them. Not such an unusual request as I have spoken to two customers in the last month with the same situation. Of course, you could create a report against each data connection and just run or call the appropriate report. Not too bad if you have two or three data connections but more than that and it becomes a maintenance nightmare having to update queries or layouts. Ideally you want to have just a single report definition on the BIP server and to dynamically set the connection to be used at runtime based on the user or system that the user is in. A quick bit of digging and help from Shinji on the development team and I had an answer. Rather embarassingly, the solution has been around since the Oct 2010 rollup patch last year. Still, I grabbed the latest Jan 2011 patch - check out Note 797057.1 for the latest available patches. Once installed, I used the best web service testing tool I have yet to come across - SoapUI. Just point it at the WSDL and you can check out the available services and their parameters and then test them too. The XML packet has a new dynamic data source entry. You can set you own custom JDBC connection or just specify an existing data source name thats defined on the server. <pub:runReport> <pub:reportRequest> <pub:attributeFormat>xml</pub:attributeFormat> <pub:attributeTemplate>0</pub:attributeTemplate> <pub:byPassCache>true</pub:byPassCache> <pub:dynamicDataSource> <pub:JDBCDataSource> <pub:JDBCDriverClass></pub:JDBCDriverClass> <pub:JDBCDriverType></pub:JDBCDriverType> <pub:JDBCPassword></pub:JDBCPassword> <pub:JDBCURL></pub:JDBCURL> <pub:JDBCUserName></pub:JDBCUserName> <pub:dataSourceName>Conn1</pub:dataSourceName> </pub:JDBCDataSource> </pub:dynamicDataSource> <pub:reportAbsolutePath>/Test/Employee Report/Employee Report.xdo</pub:reportAbsolutePath> </pub:reportRequest> <pub:userID>Administrator</pub:userID> <pub:password>Administrator</pub:password> </pub:runReport> So I have Conn1 and Conn2 defined that are connections to different databases. I can just flip the name, make the WS call and get the appropriate dataset in my report. Just as an example, here's my web service call java code. Just a case of bringing in the BIP java libs to my java project. publicReportServiceService = new PublicReportServiceService(); PublicReportService publicReportService = publicReportServiceService.getPublicReportService_v11(); String userID = "Administrator"; String password = "Administrator"; ReportRequest rr = new ReportRequest(); rr.setAttributeFormat("xml"); rr.setAttributeTemplate("1"); rr.setByPassCache(true); rr.setReportAbsolutePath("/Test/Employee Report/Employee Report.xdo"); rr.setReportOutputPath("c:\\temp\\output.xml"); BIPDataSource bipds = new BIPDataSource(); JDBCDataSource jds = new JDBCDataSource(); jds.setDataSourceName("Conn1"); bipds.setJDBCDataSource(jds); rr.setDynamicDataSource(bipds); try { publicReportService.runReport(rr, userID, password); } catch (InvalidParametersException e) { e.printStackTrace(); } catch (AccessDeniedException e) { e.printStackTrace(); } catch (OperationFailedException e) { e.printStackTrace(); } } Note, Im no java whiz kid or whizzy old bloke, at least not unless Ive had a coffee. JDeveloper has a nice feature where you point it at the WSDL and it creates everything to support your calling code for you. Couple of things to remember: 1. When you call the service, remember to set the bypass the cache option. Forget it and much scratching of your head and taking my name in vain will ensue. 2. My demo actually hit the same database but used two users, one accessed the base tables another views with the same name. For far too long I thought the connection swapping was not working. I was getting the same results for both users until I realized I was specifying the schema name for the table/view in my query e.g. select * from EMP.EMPLOYEES. So remember to have a generic query that will depend entirely on the connection. Its a neat feature if you want to be able to switch connections and only define a single report and call it remotely. Now if you want the connection to be set dynamically based on the user and the report run via the user interface, thats going to be more tricky ... need to think about that one!

  Read the article

• Benefits of PerformancePoint Services Using SharePoint Server 2010

  - by Wayne

  What is PerformancePoint Services? Most of the time it happens that the metrics that make up your key performance indicators are not simple values from a data source. In SharePoint Server 2007 PerformancePoint Services, you could create two kinds of KPI metrics: Simple single value metrics from any supported data source or Complex multiple value metrics from a single Analysis Services data source using MDX. Now things are even easier with Performance Point Services in SharePoint 2010. Let us check what is it? PerformancePoint Services in SharePoint Server 2010 is a performance management service that you can use to monitor and analyze your business. By providing flexible, easy-to-use tools for building dashboards, scorecards, reports, and key performance indicators (KPIs), PerformancePoint Services can help everyone across an organization make informed business decisions that align with companywide objectives and strategy. Scorecards, dashboards, and KPIs help drive accountability. Integrated analytics help employees move quickly from monitoring information to analyzing it and, when appropriate, sharing it throughout the organization. Prior to the addition of PerformancePoint Services to SharePoint Server, Microsoft Office PerformancePoint Server 2007 functioned as a standalone server. Now PerformancePoint functionality is available as an integrated part of the SharePoint Server Enterprise license, as is the case with Excel Services in Microsoft SharePoint Server 2010. The popular features of earlier versions of PerformancePoint Services are preserved along with numerous enhancements and additional functionality. New PerformancePoint Services features PerformancePoint Services now can utilize SharePoint Server scalability, collaboration, backup and recovery, and disaster recovery capabilities. Dashboards and dashboard items are stored and secured within SharePoint lists and libraries, providing you with a single security and repository framework. New features and enhancements of SharePoint 2010 PerformancePoint Services • With PerformancePoint Services, functioning as a service in SharePoint Server, dashboards and dashboard items are stored and secured within SharePoint lists and libraries, providing you with a single security and repository framework. The new architecture also takes advantage of SharePoint Server scalability, collaboration, backup and recovery, and disaster recovery capabilities. You also can include and link PerformancePoint Services Web Parts with other SharePoint Server Web Parts on the same page. The new architecture also streamlines security models that simplify access to report data. • The Decomposition Tree is a new visualization report type available in PerformancePoint Services. You can use it to quickly and visually break down higher-level data values from a multi-dimensional data set to understand the driving forces behind those values. The Decomposition Tree is available in scorecards and analytic reports and ultimately in dashboards. • You can access more detailed business information with improved scorecards. Scorecards have been enhanced to make it easy for you to drill down and quickly access more detailed information. PerformancePoint scorecards also offer more flexible layout options, dynamic hierarchies, and calculated KPI features. Using this enhanced functionality, you can now create custom metrics that use multiple data sources. You can also sort, filter, and view variances between actual and target values to help you identify concerns or risks. • Better Time Intelligence filtering capabilities that you can use to create and use dynamic time filters that are always up to date. Other improved filters improve the ability for dashboard users to quickly focus in on information that is most relevant. • Ability to include and link PerformancePoint Services Web Parts together with other PerformancePoint Services Web parts on the same page. • Easier to author and publish dashboard items by using Dashboard Designer. • SQL Server Analysis Services 2008 support. • Increased support for accessibility compliance in individual reports and scorecards. • The KPI Details report is a new report type that displays contextually relevant information about KPIs, metrics, rows, columns, and cells within a scorecard. The KPI Details report works as a Web part that links to a scorecard or individual KPI to show relevant metadata to the end user in SharePoint Server. This Web part can be added to PerformancePoint dashboards or any SharePoint Server page. • Create analytics reports to better understand underlying business forces behind the results. Analytic reports have been enhanced to support value filtering, new chart types, and server-based conditional formatting. To conclude, PerformancePoint Services, by becoming tightly integrated with SharePoint Server 2010, takes advantage of many enterprise-level SharePoint Server 2010 features. Unfortunately, SharePoint Foundation 2010 doesn’t include this feature. There are still many choices in SharePoint family of products that include SharePoint Server 2010, SharePoint Foundation, SharePoint Server 2007 and associated free SharePoint web parts and templates.

  Read the article

• Review of ComponentOne Silverlight Controls (Free License Giveaway).

  - by mbcrump

  ComponentOne has several great products that target Silverlight Developers. One of them is their Silverlight Controls and the other is the XAP Optimizer. I decided that I would check out the controls and Xap Optimizer and feature them on my blog. After talking with ComponentOne, they agreed to take part in my Monthly Silverlight giveaway. The details are listed below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of ComponentOne Silverlight Controls + XAP Optimizer! (the winner also gets a license to Silverlight Spy) Random winner will be announced on March 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump and @ComponentOne http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit ComponentOne because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Live Demos of the Silverlight Controls is located here. The XAP Optimizer page is here. One thing that I liked about the help documentation is that you can grab a PDF that only contains documentation for that control. This allows you to get the information you need without going through several hundred pages. You can also download the full documentation from their site.  ComponentOne Silverlight Controls I recently built a hobby project and decided to use ComponentOne Silverlight Controls. The main reason for this is that the controls are heavily documented, they look great and getting help was just a tweet or forum click away. So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. 1) ComponentOne’s Image Control – Display animated GIF images on your Silverlight pages as you would in traditional Web apps. Add attractive visuals with minimal effort. 2) HTML Host - Render HTML and arbitrary URI content from within Silverlight. 3) Chart3D - Create 3D surface charts with options for contour levels, zones, a chart legend and more. 4) PDFViewer - View PDF files in Silverlight! That is just a fraction of the controls available. If you want to check out several of them in a “real” application then check out my Silverlight page at http://michaelcrump.info. This brings me to the second part of the giveaway. XAP Optimizer – Is designed to reduce the size of your XAP File. It also includes built-in obfuscation and signing. With my personal project, I decided to use the XAP Optimizer by ComponentOne. It was so easy to use. You basically give it your .XAP file and it provides an output file. If you prefer to prune unused references manually then you can prune your XAP file manually by selecting the option below. I went ahead and added Obfuscation just to try it out and it worked great. You may notice from the screenshot below that I only obfuscated assemblies that I built. The other dlls anyone can grab off the net so we have no reason to obfuscate them. You also have the option to automatically sign your .xap with the SN.exe tool. So how did it turn out? Well, I reduced my XAP size from 2.4 to 1.8 with simply a click of a button. I added obfuscation with a click of a button: Screenshot of no obfuscation on my XAP File   Screenshot of obfuscation on my XAP File with XAP Optimizer.   So, with 2 button clicks, I reduce my XAP file and obfuscated my assembly. What else can you want? Well, they provide a nice HTML report that gives you an optimization summary. So what if you don’t want to launch this tool every time you deploy a Silverlight application? Well the official documentation provided a way to do it in your built event in Visual Studio. Click the Build Events tab on the left side of the Properties window. Enter the following command in the Post-build event command line: $Program Files\ComponentOne\XapOptimizer\XapOptimizer.exe /cmd /p:$(ProjectDir)$(ProjectName).xoproj In the end, this is a great product. I love code that I don’t have to write and utilities that just work. ComponentOne delivers with both the Silverlight Controls and the XAP Optimizer. Don’t forget to leave a comment below in order to win a set of the controls! Subscribe to my feed

  Read the article

• An issue with tessellation a model with DirectX11

  - by Paul Ske

  I took the hardware tessellation tutorial from Rastertek and implemended texturing instead of color. This is great, so I wanted to implemended the same techique to a model inside my game editor and I noticed it doesn't draw anything. I compared the detailed tessellation from DirectX SDK sample. Inside the shader file - if I replace the HullInputType with PixelInputType it draws. So, I think because when I compiled the shaders inside the program it compiles VertexShader, PixelShader, HullShader then DomainShader. Isn't it suppose to be VertexShader, HullSHader, DomainShader then PixelShader or does it really not matter? I am just curious why wouldn't the model even be drawn when HullInputType but renders fine with PixelInputType. Shader Code: [code] cbuffer ConstantBuffer { float4x4 WVP; float4x4 World; // the rotation matrix float3 lightvec; // the light's vector float4 lightcol; // the light's color float4 ambientcol; // the ambient light's color bool isSelected; } cbuffer cameraBuffer { float3 cameraDirection; float padding; } cbuffer TessellationBuffer { float tessellationAmount; float3 padding2; } struct ConstantOutputType { float edges[3] : SV_TessFactor; float inside : SV_InsideTessFactor; }; Texture2D Texture; Texture2D NormalTexture; SamplerState ss { MinLOD = 5.0f; MipLODBias = 0.0f; }; struct HullOutputType { float3 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct HullInputType { float4 position : POSITION; float2 texcoord : TEXCOORD0; float3 normal : NORMAL; float3 tangent : TANGENT; }; struct VertexInputType { float4 position : POSITION; float2 texcoord : TEXCOORD; float3 normal : NORMAL; float3 tangent : TANGENT; uint uVertexID : SV_VERTEXID; }; struct PixelInputType { float4 position : SV_POSITION; float2 texcoord : TEXCOORD0; // texture coordinates float3 normal : NORMAL; float3 tangent : TANGENT; float4 color : COLOR; float3 viewDirection : TEXCOORD1; float4 depthBuffer : TEXTURE0; }; HullInputType VShader(VertexInputType input) { HullInputType output; output.position.w = 1.0f; output.position = mul(input.position,WVP); output.texcoord = input.texcoord; output.normal = input.normal; output.tangent = input.tangent; //output.normal = mul(normal,World); //output.tangent = mul(tangent,World); //output.color = output.color; //output.texcoord = texcoord; // set the texture coordinates, unmodified return output; } ConstantOutputType TexturePatchConstantFunction(InputPatch inputPatch,uint patchID : SV_PrimitiveID) { ConstantOutputType output; output.edges[0] = tessellationAmount; output.edges[1] = tessellationAmount; output.edges[2] = tessellationAmount; output.inside = tessellationAmount; return output; } [domain("tri")] [partitioning("integer")] [outputtopology("triangle_cw")] [outputcontrolpoints(3)] [patchconstantfunc("TexturePatchConstantFunction")] HullOutputType HShader(InputPatch patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID) { HullOutputType output; // Set the position for this control point as the output position. output.position = patch[pointId].position; // Set the input color as the output color. output.texcoord = patch[pointId].texcoord; output.normal = patch[pointId].normal; output.tangent = patch[pointId].tangent; return output; } [domain("tri")] PixelInputType DShader(ConstantOutputType input, float3 uvwCoord : SV_DomainLocation, const OutputPatch patch) { float3 vertexPosition; float2 uvPosition; float4 worldposition; PixelInputType output; // Interpolate world space position with barycentric coordinates float3 vWorldPos = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; // Determine the position of the new vertex. vertexPosition = vWorldPos; // Calculate the position of the new vertex against the world, view, and projection matrices. output.position = mul(float4(vertexPosition, 1.0f),WVP); // Send the input color into the pixel shader. output.texcoord = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.normal = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; output.tangent = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position; //output.depthBuffer = output.position; //output.depthBuffer.w = 1.0f; //worldposition = mul(output.position,WVP); //output.viewDirection = cameraDirection.xyz - worldposition.xyz; //output.viewDirection = normalize(output.viewDirection); return output; } [/code] Somethings are commented out but will be in place when fixed. I'm probably not connecting something correctly.

  Read the article

• Verizon Wireless Supports its Mission-Critical Employee Portal with MySQL

  - by Bertrand Matthelié

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Verizon Wireless, the #1 mobile carrier in the United States, operates the nation’s largest 3G and 4G LTE network, with the most subscribers (109 millions) and the highest revenue ($70.2 Billion in 2011). Verizon Wireless built the first wide-area wireless broadband network and delivered the first wireless consumer 3G multimedia service in the US, and offers global voice and data services in more than 200 destinations around the world. To support 4.2 million daily wireless transactions and 493,000 calls and emails transactions produced by 94.2 million retail customers, Verizon Wireless employs over 78,000 employees with area headquarters across the United States. The Business Challenge Seeing the stupendous rise in social media, video streaming, live broadcasting…etc which redefined the scope of technology, Verizon Wireless, as a technology savvy company, wanted to provide a platform to its employees where they could network socially, view and host microsites, stream live videos, blog and provide the latest news. The IT team at Verizon Wireless had abundant experience with various technology platforms to support the huge number of applications in the company. However, open-source products weren’t yet widely used in the organization and the team had the ambition to adopt such technologies and see if the architecture could meet Verizon Wireless’ rigid requirements. After evaluating a few solutions, the IT team decided to use the LAMP stack for Vzweb, its mission-critical, 24x7 employee portal, with Drupal as the front end and MySQL on Linux as the backend, and for a few other internal websites also on MySQL. The MySQL Solution Verizon Wireless started to support its employee portal, Vzweb, its online streaming website, Vztube, and internal wiki pages, Vzwiki, with MySQL 5.1 in 2010. Vzweb is the main internal communication channel for Verizon Wireless, while Vztube hosts important company-wide webcasts regularly for executive-level announcements, so both channels have to be live and accessible all the time for its 78,000 employees across the United States. However during the initial deployment of the MySQL based Intranet, the application experienced performance issues. High connection spikes occurred causing slow user response time, and the IT team applied workarounds to continue the service. A number of key performance indexes (KPI) for the infrastructure were identified and the operational framework redesigned to support a more robust website and conform to the 99.985% uptime SLA (Service-Level Agreement). The MySQL DBA team made a series of upgrades in MySQL: Step 1: Moved from MyISAM to InnoDB storage engine in 2010 Step 2: Upgraded to the latest MySQL 5.1.54 release in 2010 Step 3: Upgraded from MySQL 5.1 to the latest GA release MySQL 5.5 in 2011, and leveraging MySQL Thread Pool as part of MySQL Enterprise Edition to scale better After making those changes, the team saw a much better response time during high concurrency use cases, and achieved an amazing performance improvement of 1400%! In January 2011, Verizon CEO, Ivan Seidenberg, announced the iPhone launch during the opening keynote at Consumer Electronic Show (CES) in Las Vegas, and that presentation was streamed live to its 78,000 employees. The event was broadcasted flawlessly with MySQL as the database. Later in 2011, Hurricane Irene attacked the East Coast of United States and caused major life and financial damages. During the hurricane, the team directed more traffic to its west coast data center to avoid potential infrastructure damage in the East Coast. Such transition was executed smoothly and even though the geographical distance became longer for the East Coast users, there was no impact in the performance of Vzweb and Vztube, and the SLA goal was achieved. “MySQL is the key component of Verizon Wireless’ mission-critical employee portal application,” said Shivinder Singh, senior DBA at Verizon Wireless. “We achieved 1400% performance improvement by moving from the MyISAM storage engine to InnoDB, upgrading to the latest GA release MySQL 5.5, and using the MySQL Thread Pool to support high concurrent user connections. MySQL has become part of our IT infrastructure, on which potentially more future applications will be built.” To learn more about MySQL Enterprise Edition, Get our Product Guide.

  Read the article

• Integrating Code Metrics in TFS 2010 Build

  - by Jakob Ehn

  The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications.  This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

  Read the article

• Lync Server 2010

  - by ManojDhobale

  Microsoft Lync Server 2010 communications software and its client software, such as Microsoft Lync 2010, enable your users to connect in new ways and to stay connected, regardless of their physical location. Lync 2010 and Lync Server 2010 bring together the different ways that people communicate in a single client interface, are deployed as a unified platform, and are administered through a single management infrastructure. Workload Description IM and presence Instant messaging (IM) and presence help your users find and communicate with one another efficiently and effectively. IM provides an instant messaging platform with conversation history, and supports public IM connectivity with users of public IM networks such as MSN/Windows Live, Yahoo!, and AOL. Presence establishes and displays a user’s personal availability and willingness to communicate through the use of common states such as Available or Busy. This rich presence information enables other users to immediately make effective communication choices. Conferencing Lync Server includes support for IM conferencing, audio conferencing, web conferencing, video conferencing, and application sharing, for both scheduled and impromptu meetings. All these meeting types are supported with a single client. Lync Server also supports dial-in conferencing so that users of public switched telephone network (PSTN) phones can participate in the audio portion of conferences. Conferences can seamlessly change and grow in real time. For example, a single conference can start as just instant messages between a few users, and escalate to an audio conference with desktop sharing and a larger audience instantly, easily, and without interrupting the conversation flow. Enterprise Voice Enterprise Voice is the Voice over Internet Protocol (VoIP) offering in Lync Server 2010. It delivers a voice option to enhance or replace traditional private branch exchange (PBX) systems. In addition to the complete telephony capabilities of an IP PBX, Enterprise Voice is integrated with rich presence, IM, collaboration, and meetings. Features such as call answer, hold, resume, transfer, forward and divert are supported directly, while personalized speed dialing keys are replaced by Contacts lists, and automatic intercom is replaced with IM. Enterprise Voice supports high availability through call admission control (CAC), branch office survivability, and extended options for data resiliency. Support for remote users You can provide full Lync Server functionality for users who are currently outside your organization’s firewalls by deploying servers called Edge Servers to provide a connection for these remote users. These remote users can connect to conferences by using a personal computer with Lync 2010 installed, the phone, or a web interface. Deploying Edge Servers also enables you to federate with partner or vendor organizations. A federated relationship enables your users to put federated users on their Contacts lists, exchange presence information and instant messages with these users, and invite them to audio calls, video calls, and conferences. Integration with other products Lync Server integrates with several other products to provide additional benefits to your users and administrators. Meeting tools are integrated into Outlook 2010 to enable organizers to schedule a meeting or start an impromptu conference with a single click and make it just as easy for attendees to join. Presence information is integrated into Outlook 2010 and SharePoint 2010. Exchange Unified Messaging (UM) provides several integration features. Users can see if they have new voice mail within Lync 2010. They can click a play button in the Outlook message to hear the audio voice mail, or view a transcription of the voice mail in the notification message. Simple deployment To help you plan and deploy your servers and clients, Lync Server provides the Microsoft Lync Server 2010, Planning Tool and the Topology Builder. Lync Server 2010, Planning Tool is a wizard that interactively asks you a series of questions about your organization, the Lync Server features you want to enable, and your capacity planning needs. Then, it creates a recommended deployment topology based on your answers, and produces several forms of output to aid your planning and installation. Topology Builder is an installation component of Lync Server 2010. You use Topology Builder to create, adjust and publish your planned topology. It also validates your topology before you begin server installations. When you install Lync Server on individual servers, the installation program deploys the server as directed in the topology. Simple management After you deploy Lync Server, it offers the following powerful and streamlined management tools: Active Directory for its user information, which eliminates the need for separate user and policy databases. Microsoft Lync Server 2010 Control Panel, a new web-based graphical user interface for administrators. With this web-based UI, Lync Server administrators can manage their systems from anywhere on the corporate network, without needing specialized management software installed on their computers. Lync Server Management Shell command-line management tool, which is based on the Windows PowerShell command-line interface. It provides a rich command set for administration of all aspects of the product, and enables Lync Server administrators to automate repetitive tasks using a familiar tool. While the IM and presence features are automatically installed in every Lync Server deployment, you can choose whether to deploy conferencing, Enterprise Voice, and remote user access, to tailor your deployment to your organization’s needs.

  Read the article

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• Pella Increases Online Appointment Scheduling and Rapidly Personalizes and Updates Marketing Initiatives

  - by Michael Snow

  Originally posted on Oracle Customers page.Oracle Customer: Pella CorporationLocation:  Pella, IowaIndustry: Industrial Manufacturing Employees:  7,100 Pella Corporation is an innovative leader in creating a better view for homes and businesses by designing, testing, manufacturing, and installing quality windows and doors for new construction, remodeling, and replacement applications. A family-owned company, Pella has an 88-year history of innovation and, today, is the second-largest manufacturer in the country of windows and doors, including patio, entry, and storm doors. The company has 10 manufacturing facilities in United States and window and door showrooms across the United States and Canada. In-home consultations are an important part of Pella’s sales process. Several years ago, the company launched an online appointment scheduling tool to improve customer convenience. While the functionality worked well, the company wanted to increase online conversion rates and decrease the number of incomplete, online appointment schedules. It also wanted to give its business analysts and other line-of-business personnel the ability to update the scheduling tool and interface quickly, without needing IT team intervention and recoding, to better capitalize on opportunities and personalize the interface for specific markets. Pella also looked to reduce IT complexity by selecting a system that integrated easily with its Oracle E-Business Suite Release 12.1 enterprise applications.Pella, which has a large Oracle footprint, selected Oracle WebCenter Sites as the foundation for its new, real-time appointment scheduling application. It used the solution to re-engineer the scheduling process and the information required to set up an appointment. Just a few months after launch, it is seeing improvement in the number of appointments booked online and experiencing fewer abandoned appointments during the scheduling process. As important, Pella can now quickly and easily make changes to images, video, and content displayed on the scheduling tool interface, delivering greater business agility. Previously, such changes required a developer and weeks of coding and testing. Today, a member of Pella’s business analyst team can complete the changes in hours. This capability enables Pella to personalize the Web experience for customers. For example, it can display different products or images for clients in different regions.The solution is also highly scalable. Pella is using Oracle WebCenter Sites for appointment scheduling now and plans to migrate Pella.com, its configurator tool, and dealer microsites onto the platform. Further, Pella plans to leverage the solution to optimize mobile devices. “Moving ahead, we expect to extensively leverage Oracle WebCenter Sites to gain greater flexibility in updating the Web experience, thanks to the ability to make updates quickly without developer resources. Segmentation and targeting capabilities will allow us to create a more personalized experience across both traditional and mobile platforms,” said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. A word from Pella Corporation "Oracle WebCenter Sites?from the start?delivered important benefits. We’ve redesigned the online scheduling process and are seeing more potential customers completing consultation bookings online. More important, the solution opens a world of other possibilities as we plan to migrate Pella.com and our dealer microsites to the platform, and leverage it to optimize the Web experience for our mobile devices.” – Teri Lancaster, IT Manager, Customer Experience Applications, Pella Corporation Oracle Product and Services Oracle WebCenter Sites Why Oracle Pella has a long-standing relationship with Oracle. “We look to Oracle first for a solution. Our Oracle account team came to us with several solutions, and Oracle WebCenter Sites delivered the scalability, ease-of-use, flexibility, and scalability that we required for the appointment scheduling initiative and other Web projects on the horizon, including migrating Pella.com and optimizing our site for mobile platforms,”said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. Implementation Process The Pella implementation team, working with Oracle partner Element Solutions, LLC, integrated the appointment setting application with Pella.com as well as the company’s Oracle E-Business Suite customer relationship management applications. Using Oracle WebCenter Site’s development tools and subversion capabilities to develop the application, the Element Solutions and Pella teams could work remotely and collaboratively, accelerating deployment. Pella went live with the new scheduling tool in just six months. Partner Oracle PartnerElement Solutions, LLC Element Solutions was instrumental at every major stage of the project, including design creation and approval, development, training, and rollout. “Element Solutions was a vital partner for our Oracle WebCenter Sites initiative. The team provided guidance, and more important, critical knowledge transfer at every stage?which equipped us to get the most out of this powerful and versatile solution. We were definitely collaboration partners,” Lancaster said. Resources Pella Corporation Upgrades Enterprise Applications to Continue to Improve Manufacturing Efficiency Thousands of Customers Successfully and Smoothly Upgrade to Oracle E-Business Suite 12.1 for New Functionality, Lower Operating Costs and Improved Shared Operations Managing the Virtual World

  Read the article

• Weekend With #iPad

  - by andrewbrust

  Saturday morning, I got up, got dressed and took a 7-minute walk up to the Apple Store in New York’s Meatpacking District to pick up my reserved iPad.  This precinct, which borders Greenwich Village (where I live and grew up) was, when I was a kid, a very industrial and smelly neighborhood during the day  and a rough neighborhood at night.  So imagine my sense of irony as I walked up Hudson Street towards 14th Street, to go wait in line with a bunch of hipsters to buy an iPad on launch day. Numerous blue T-shirt-clad Apple store workers were on hand to check people in to the line specifically identified for people who had reserved an iPad.  Others workers passed out water and all of them, I kid you not, applauded people as they got their chance to go into the store and buy their devices.  They also cheered people and yelled “congratulations” as they left.  The event had all the charm of a mass wedding officiated by Reverend Sung Myung Moon.  Once inside, a nice dude named Trey, with lots of tattoos on his calves, helped me and I acquired my device in short order.  Another guy helped me activate the device, which was comical, because that has to be done through iTunes, which I hadn’t logged into in a while. Turns out my user id was my email address from the company I sold 5 1/2 years ago.  Who knew?  Regardless, I go the device working, packed up and left the store, shuddering as I was cheered and congratulated.  By this time (about 10:30am) the line for reserved units and even walk-ins, was gone.  The iPhone launch this was not. As much as I detested the Apple Store experience, I must say the device is really nice.  the screen is bright, the colors are bold, and the experience is ultra-smooth.  I quickly tested Safari, YouTube, Google Maps, and then installed a few apps, including the New York Times Editors’ Choice and a couple of Twitter clients. Some initial raves: Google Maps and Street View on the iPad is just amazing.  The screen is full-size like a PC or Mac, but it’s right in front of you and responding to taps and flicks and pinches and it’s really engulfing.  Video and photos are really nice on this device, despite the fact that 16:9 and anamorphic aspect ration content is letter boxed.  It still looks amazing.  And apps that are designed especially for the iPad, including The Weather Channel and Gilt and Kayak just look stunning.  The richness, the friendly layout, the finger-friendly UIs, and the satisfaction of not having a keyboard between you and the information you’re managing, while you sit on a couch or an easy chair, is just really a beautiful thing.  The mere experience of seeing these apps’ splash screens causes a shiver and Goosebumps.  Truly.  The iPad is not a desktop machine, and it’s not pocket device.  That doesn’t mean it’s useless though.  It’s the perfect “couchtop” computer. Now some downsides: the WiFi radio seems a bit flakey.  More than a few times, I have had to toggle the WiFi off and back on to get it to connect properly.  Worse yet, the iPad is totally bamboozled by the fact that I have four WiFi access points in my house, each with the same SSID.  My laptops are smart enough to roam from one to the other, but the iPad seems to maintain an affinity for the downstairs access point, even if I’m turning it on two flights up.  Telling the iPad to “forget” my WiFi network and then re-associate with it doesn’t help. More downers: as you might expect, there are far more applications developed for the iPhone than the iPad.  And although iPhone apps run on the iPad, that provides about the same experience as watching standard def on a big HD flat panel, complete with the lousy choice of thick black borders or zooming the picture in to fill the screen.  And speaking of iPhone Apps, I can’t get the Sonos one to work.  Ideally, they’d have a dedicated iPad app and it would work on the first try.  And the iPad is just as bad as any netbook when it comes to being a magnet for fingerprints.  The lack of multi-tasking is quite painful too – truly, I don’t mind if only one app can be active at once, but the lack of ability to switch between apps, and the requirement to return to the home screen and re-launch a previous app to switch back, is already old and I’ve had the thing less than 48 hours. These are just initial impressions.  I’ll have a fuller analysis soon, after I’ve had some more break-in time with my new toy.  I’ll be thinking not just about the iPad and iPhone but also about Android, the 2.1 update for which was pushed to my Droid today, and Windows Phone 7, whose “hub” concept I now understand the value of.  This has been a great year for alternative computing devices, and I see no net downside for Apple, Google or Microsoft.  Exciting times.

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you’ll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you’ve read my previous blog posts, you’ll be aware that I’ve been focusing on the database continuous integration theme. In my CI setup I create a “production”-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it’s not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn’t I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn’t an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley’s “Continuous Delivery” teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you’ve been allotted. 2. It’s not just about the storage requirements, it’s also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I’m just not going to get the feedback quickly enough to react. So what’s the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I’m sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server’s point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no ‘duplicate’ storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly “release test” process triggered by my CI tool. RESTORE DATABASE WidgetProduction_Virtual FROM DISK=N'D:\VirtualDatabase\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE WidgetProduction_Virtual WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the ‘virtual’ restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• How big can my SharePoint 2010 installation be?

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). 3 years ago, I had published “How big can my SharePoint 2007 installation be?” Well, SharePoint 2010 has significant under the covers improvements. So, how big can your SharePoint 2010 installation be? There are three kinds of limits you should know about Hard limits that cannot be exceeded by design. Configurable that are, well configurable – but the default values are set for a pretty good reason, so if you need to tweak, plan and understand before you tweak. Soft limits, you can exceed them, but it is not recommended that you do. Before you read any of the limits, read these two important disclaimers - 1. The limit depends on what you’re doing. So, don’t take the below as gospel, the reality depends on your situation. 2. There are many additional considerations in planning your SharePoint solution scalability and performance, besides just the below. So with those in mind, here goes.   Hard Limits - Zones per web app 5 RBS NAS performance Time to first byte of any response from NAS must be less than 20 milliseconds List row size 8000 bytes driven by how SP stores list items internally Max file size 2GB (default is 50MB, configurable). RBS does not increase this limit. Search metadata properties 10,000 per item crawled (pretty damn high, you’ll never need to worry about it). Max # of concurrent in-memory enterprise content types 5000 per web server, per tenant Max # of external system connections 500 per web server PerformancePoint services using Excel services as a datasource No single query can fetch more than 1 million excel cells Office Web Apps Renders One doc per second, per CPU core, per Application server, limited to a maximum of 8 cores.   Configurable Limits - Row Size Limit 6, configurable via SPWebApplication.MaxListItemRowStorage property List view lookup 8 join operations per query Max number of list items that a single operation can process at one time in normal hours 5000 Configurable via SPWebApplication.MaxItemsPerThrottledOperation   Also you get a warning at 3000, which is configurable via SPWebApplication.MaxItemsPerThrottledOperationWarningLevel   In addition, throttle overrides can be requested, throttle overrides can be disabled, and time windows can be set when throttle is disabled. Max number of list items for administrators that a single operation can process at one time in normal hours 20000 Configurable via SPWebApplication.MaxItemsPerThrottledOperationOverride Enumerating subsites 2000 Word and Powerpoint co-authoring simultaneous editors 10 (Hard limit is 99). # of webparts on a page 25 Search Crawl DBs per search service app 10 Items per crawl db 25 million Search Keywords 200 per site collection. There is a max limit of 5000, which can then be modified by editing the web.config/client.config. Concurrent # of workflows on a content db 15. Workflows running in the timer service are not counted in this limit. Further workflows are queued. Can be configured via the Set-SPFarmConfig powershell commandlet. Number of events picked by the workflow timer job and delivered to workflows 100. You can increase this limit by running additional instances of the workflow timer service. Visio services file size 50MB Visio web drawing recalculation timeout 120 seconds Configurable via – Powershell commandlet Set-SPVisioPerformance Visio services minimum and maximum cache age for data connected diagrams 0 to 24 hours. Default is 60 minutes. Configurable via – Powershell commandlet Set-SPVisioPerformance   Soft Limits - Content Databases 300 per web app Application Pools 10 per web server Managed Paths 20 per web app Content Database Size 200GB per Content DB Size of 1 site collection 100GB # of sites in a site collection 250,000 Documents in a library 30 Million, with nesting. Depends heavily on type and usage and size of documents. Items 30 million. Depends heavily on usage of items. SPGroups one SPUser can be in 5000 Users in a site collection 2 million, depends on UI, nesting, containers and underlying user store AD Principals in a SPGroup 5000 SPGroups in a site collection 10000 Search Service Instances 20 Indexed Items in Search 100 million Crawl Log entries 100 million Search Alerts 1 million per search application Search Crawled Properties 1/2 million URL removals in search 100 removals per operation User Profiles 2 million per service application Social Tags 500 million per social database Comment on the article ....

  Read the article

• Not so long ago in a city not so far away by Carlos Martin

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is the story of how the EMEA Presales Center turned an Oracle intern into a trusted technology advisor for both Oracle’s Sales and customers. It was the summer of 2011 when I was finishing my Computer Engineering studies as well as my internship at Oracle when I was offered what could possibly be THE dream job for any young European Computer Engineer. Apart from that, it also seemed like the role was particularly tailored to me as I could leverage almost everything I learned at University and during the internship. And all of it in one of the best cities to live in, not only from my home country but arguably from Europe: Malaga! A day at EPC As part of the EPC Technology pillar, and later on completely focused on WebCenter, there was no way to describe a normal day on the job as each day had something unique. Some days I was researching documentation in order to elaborate accurate answers for a customer’s question within a Request for Information or Proposal (RFI/RFP), other days I was doing heavy programming in order to bring a Proof of Concept (PoC) for a customer to life and last not but least, some days I presented to the customer via webconference the demo I built for them the past weeks. So as you can see, the role has research, development and presentation, could you ask for more? Well, don’t worry because there IS more! Internationality As the organization’s name suggests, EMEA Presales Center, it is the Center of Presales within Europe, Middle East and Africa so I got the chance to work with great professionals from all this regions, expanding my network and learning things from one country to apply them to others. In addition to that, the teams based in the Malaga office are comprised of many young professionals hailing mainly from Western and Central European countries (although there are a couple of exceptions!) with very different backgrounds and personalities which guaranteed many laughs and stories during lunch or coffee breaks (or even while working on projects!). Furthermore, having EPC offices in Bucharest and Bangalore and thanks to today’s tele-presence technologies, I was working every day with people from India or Romania as if they were sitting right next to me and the bonding with them got stronger day by day. Career development Apart from the research and self-study I’ve earlier mentioned, one of the EPC’s Key Performance Indicators (KPI) is that 15% of your time is spent on training so you get lots and lots of trainings in order to develop both your technical product knowledge and your presentation, negotiation and other soft skills. Sometimes the training is via webcast, sometimes the trainer comes to the office and sometimes, the best times, you get to travel abroad in order to attend a training, which also helps you to further develop your network by meeting face to face with many people you only know from some email or instant messaging interaction. And as the months go by, your skills improving at a very fast pace, your relevance increasing with each new project you successfully deliver, it’s only a matter of time (and a bit of self-promoting!) that you get the attention of the manager of a more senior team and are offered the opportunity to take a new step in your professional career. For me it took 2 years to move to my current position, Technology Sales Consultant at the Oracle Direct organization. During those 2 years I had built a good relationship with the Oracle Direct Spanish sales and sales managers, who are also based in the Malaga office. I supported their former Sales Consultant in a couple of presentations and demos and were very happy with my overall performance and attitude so even before the position got eventually vacant, I got a heads-up from then in advance that their current Sales Consultant was going to move to a different position. To me it felt like a natural step, same as when I joined EPC, I had at least a 50% of the “homework” already done but wanted to experience that extra 50% to add new product and soft skills to my arsenal. The rest is history, I’ve been in the role for more than half a year as I’m writing this, achieved already some important wins, gained a lot of trust and confidence in front of customers and broadened my view of Oracle’s Fusion Middleware portfolio. I look back at the 2 years I spent in EPC and think: “boy, I’d recommend that experience to absolutely anyone with the slightest interest in IT, there are so many different things you can do as there are different kind of roles you can end up taking thanks to the experience gained at EPC” /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Why does setting a geometry shader cause my sprites to vanish?

  - by ChaosDev

  My application has multiple screens with different tasks. Once I set a geometry shader to the device context for my custom terrain, it works and I get the desired results. But then when I get back to the main menu, all sprites and text disappear. These sprites don't dissappear when I use pixel and vertex shaders. The sprites are being drawn through D3D11, of course, with specified view and projection matrices as well an input layout, vertex, and pixel shader. I'm trying DeviceContext->ClearState() but it does not help. Any ideas? void gGeometry::DrawIndexedWithCustomEffect(gVertexShader*vs,gPixelShader* ps,gGeometryShader* gs=nullptr) { unsigned int offset = 0; auto context = mp_D3D->mp_Context; //set topology context->IASetPrimitiveTopology(m_Topology); //set input layout context->IASetInputLayout(mp_inputLayout); //set vertex and index buffers context->IASetVertexBuffers(0,1,&mp_VertexBuffer->mp_Buffer,&m_VertexStride,&offset); context->IASetIndexBuffer(mp_IndexBuffer->mp_Buffer,mp_IndexBuffer->m_DXGIFormat,0); //send constant buffers to shaders context->VSSetConstantBuffers(0,vs->m_CBufferCount,vs->m_CRawBuffers.data()); context->PSSetConstantBuffers(0,ps->m_CBufferCount,ps->m_CRawBuffers.data()); if(gs!=nullptr) { context->GSSetConstantBuffers(0,gs->m_CBufferCount,gs->m_CRawBuffers.data()); context->GSSetShader(gs->mp_D3DGeomShader,0,0);//after this call all sprites disappear } //set shaders context->VSSetShader( vs->mp_D3DVertexShader, 0, 0 ); context->PSSetShader( ps->mp_D3DPixelShader, 0, 0 ); //draw context->DrawIndexed(m_indexCount,0,0); } //sprites void gSpriteDrawer::Draw(gTexture2D* texture,const RECT& dest,const RECT& source, const Matrix& spriteMatrix,const float& rotation,Vector2d& position,const Vector2d& origin,const Color& color) { VertexPositionColorTexture* verticesPtr; D3D11_MAPPED_SUBRESOURCE mappedResource; unsigned int TriangleVertexStride = sizeof(VertexPositionColorTexture); unsigned int offset = 0; float halfWidth = ( float )dest.right / 2.0f; float halfHeight = ( float )dest.bottom / 2.0f; float z = 0.1f; int w = texture->Width(); int h = texture->Height(); float tu = (float)source.right/(w); float tv = (float)source.bottom/(h); float hu = (float)source.left/(w); float hv = (float)source.top/(h); Vector2d t0 = Vector2d( hu+tu, hv); Vector2d t1 = Vector2d( hu+tu, hv+tv); Vector2d t2 = Vector2d( hu, hv+tv); Vector2d t3 = Vector2d( hu, hv+tv); Vector2d t4 = Vector2d( hu, hv); Vector2d t5 = Vector2d( hu+tu, hv); float ex=(dest.right/2)+(origin.x); float ey=(dest.bottom/2)+(origin.y); Vector4d v4Color = Vector4d(color.r,color.g,color.b,color.a); VertexPositionColorTexture vertices[] = { { Vector3d( dest.right-ex, -ey, z),v4Color, t0}, { Vector3d( dest.right-ex, dest.bottom-ey , z),v4Color, t1}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t2}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t3}, { Vector3d( -ex, -ey , z),v4Color, t4}, { Vector3d( dest.right-ex, -ey , z),v4Color, t5}, }; auto mp_context = mp_D3D->mp_Context; // Lock the vertex buffer so it can be written to. mp_context->Map(mp_vertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource); // Get a pointer to the data in the vertex buffer. verticesPtr = (VertexPositionColorTexture*)mappedResource.pData; // Copy the data into the vertex buffer. memcpy(verticesPtr, (void*)vertices, (sizeof(VertexPositionColorTexture) * 6)); // Unlock the vertex buffer. mp_context->Unmap(mp_vertexBuffer, 0); //set vertex shader mp_context->IASetVertexBuffers( 0, 1, &mp_vertexBuffer, &TriangleVertexStride, &offset); //set texture mp_context->PSSetShaderResources( 0, 1, &texture->mp_SRV); //set matrix to shader mp_context->UpdateSubresource(mp_matrixBuffer, 0, 0, &spriteMatrix, 0, 0 ); mp_context->VSSetConstantBuffers( 0, 1, &mp_matrixBuffer); //draw sprite mp_context->Draw( 6, 0 ); }

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• SQL SERVER – SSMS: Top Object and Batch Execution Statistics Reports

  - by Pinal Dave

  The month of June till mid of July has been the fever of sports. First, it was Wimbledon Tennis and then the Soccer fever was all over. There is a huge number of fan followers and it is great to see the level at which people sometimes worship these sports. Being an Indian, I cannot forget to mention the India tour of England later part of July. Following these sports and as the events unfold to the finals, there are a number of ways the statisticians can slice and dice the numbers. Cue from soccer I can surely say there is a team performance against another team and then there is individual member fairs against a particular opponent. Such statistics give us a fair idea to how a team in the past or in the recent past has fared against each other, head-to-head stats during World cup and during other neutral venue games. All these statistics are just pointers. In reality, they don’t reflect the calibre of the current team because the individuals who performed in each of these games are totally different (Typical example being the Brazil Vs Germany semi-final match in FIFA 2014). So at times these numbers are misleading. It is worth investigating and get the next level information. Similar to these statistics, SQL Server Management studio is also equipped with a number of reports like a) Object Execution Statistics report and b) Batch Execution Statistics reports. As discussed in the example, the team scorecard is like the Batch Execution statistics and individual stats is like Object Level statistics. The analogy can be taken only this far, trust me there is no correlation between SQL Server functioning and playing sports – It is like I think about diet all the time except while I am eating. Performance – Batch Execution Statistics Let us view the first report which can be invoked from Server Node -> Reports -> Standard Reports -> Performance – Batch Execution Statistics. Most of the values that are displayed in this report come from the DMVs sys.dm_exec_query_stats and sys.dm_exec_sql_text(sql_handle). This report contains 3 distinctive sections as outline below.   Section 1: This is a graphical bar graph representation of Average CPU Time, Average Logical reads and Average Logical Writes for individual batches. The Batch numbers are indicative and the details of individual batch is available in section 3 (detailed below). Section 2: This represents a Pie chart of all the batches by Total CPU Time (%) and Total Logical IO (%) by batches. This graphical representation tells us which batch consumed the highest CPU and IO since the server started, provided plan is available in the cache. Section 3: This is the section where we can find the SQL statements associated with each of the batch Numbers. This also gives us the details of Average CPU / Average Logical Reads and Average Logical Writes in the system for the given batch with object details. Expanding the rows, I will also get the # Executions and # Plans Generated for each of the queries. Performance – Object Execution Statistics The second report worth a look is Object Execution statistics. This is a similar report as the previous but turned on its head by SQL Server Objects. The report has 3 areas to look as above. Section 1 gives the Average CPU, Average IO bar charts for specific objects. The section 2 is a graphical representation of Total CPU by objects and Total Logical IO by objects. The final section details the various objects in detail with the Avg. CPU, IO and other details which are self-explanatory. At a high-level both the reports are based on queries on two DMVs (sys.dm_exec_query_stats and sys.dm_exec_sql_text) and it builds values based on calculations using columns in them: SELECT * FROM    sys.dm_exec_query_stats s1 CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS s2 WHERE   s2.objectid IS NOT NULL AND DB_NAME(s2.dbid) IS NOT NULL ORDER BY  s1.sql_handle; This is one of the simplest form of reports and in future blogs we will look at more complex reports. I truly hope that these reports can give DBAs and developers a hint about what is the possible performance tuning area. As a closing point I must emphasize that all above reports pick up data from the plan cache. If a particular query has consumed a lot of resources earlier, but plan is not available in the cache, none of the above reports would show that bad query. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• Convert a PDF eBook to ePub Format

  - by Matthew Guay

  Would you like to read a PDF eBook on an eReader or mobile device, but aren’t happy with the performance? Here’s how you can convert your PDFs to the popular ePub format so you can easily read them on any device. PDFs are a popular format for eBooks since they render the same on any device and can preserve the exact layout of the print book.  However, this benefit is their major disadvantage on mobile devices, as you often have to zoom and pan back and forth to see everything on the page.  ePub files, on the other hand, are an increasingly popular option. They can reflow to fill your screen instead of sticking to a strict layout style.  With the free Calibre program, you can quickly convert your PDF eBooks to ePub format. Getting Started Download the Calibre installer (link below) for your operating system, and install as normal.  Calibre works on recent versions of Windows, OS X, and Linux.  The Calibre installer is very streamlined, so the install process was quite quick. Calibre is a great application for organizing your eBooks.  It can automatically sort your books by their metadata, and even display their covers in a Coverflow-style viewer. To add an eBook to your library, simply drag-and-drop the file into the Calibre window, or click Add books at the top.  Here you can choose to add all the books from a folder and more. Calibre will then add the book(s) to your library, import the associated metadata, and organize them in the catalog. Convert your Books Once you’ve imported your books into Calibre, it’s time to convert them to the format you want.  Select the book or books you want to convert, and click Convert E-books.  Select whether you want to convert them individually or bulk convert them. The convertor window has lots of options, so you can get your ePub book exactly like you want.  You can simply click Ok and go with the defaults, or you can tweak the settings. Do note that the conversion will only work successfully with PDFs that contain actual text.  Some PDFs are actually images scanned in from the original books; these will appear just like the PDF after the conversion, and won’t be any easier to read. On the first tab, you’ll notice that Calibri will repopulate most of the metadata fields with info from your PDF.  It will also use the first page of the PDF as the cover.  Edit any of the information that may be incorrect, and add any additional information you want associated with the book. If you want to convert your eBook to a different format other than ePub, Calibri’s got you covered, too.  On the top right, you can choose to output the converted eBook into a many different file formats, including the Kindle-friendly MOBI format. One other important settings page is the Structure Detection tab.  Here you can choose to have it remove headers and footers in the converted book, as well as automatically detect chapter breaks. Click Ok when you’ve finished choosing your settings and Calibre will convert the book.  This may take a few minutes, depending on the size of the PDF.  If the conversion seems to be taking too long, you can click Show job details for more information on the progress.   The conversion usually works good, but we did have one job freeze on us.  When we checked the job details, it indicated that the PDF was copy-protected.  Most PDF eBooks, however, worked fine. Now, back in the main Calibri window, select your book and save it to disk.  You can choose to save only the EPUB format, or you can select Save to disk to save all formats of the book to your computer. You can also view the ePub file directly in Calibri’s built-in eBook viewer.  This is the PDF book we converted, and it looks fairly good in the converted format.  It does have some odd line breaks and some misplaced numbers, but on the whole, the converted book is much easier to read, especially on small mobile devices.   Even images get included inline, so you shouldn’t be missing anything from the original eBook. Conclusion Calibri makes it simple to read your eBooks in any format you need. It is a project that is in constant development, and updates regularly adding better stability and features.  Whether you want to ready your PDF eBooks on a Sony Reader, Kindle, netbook or Smartphone, your books will now be more accessible than ever.  And with thousands of free PDF eBooks out there, you’ll be sure to always have something to read. If you’d like some Geeky PDF eBooks, Microsoft Press is offering a number of free PDF eBooks right now.  Check them out at this link (Account Required). Download the Calibre eBook program Similar Articles Productive Geek Tips Format a String as Currency in C#Convert Older Excel Documents to Excel 2007 FormatShare OneNote 2010 Notebooks with OneNote 2007Install an RPM Package on Ubuntu LinuxConvert PDF Files to Word Documents and Other Formats TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• Oracle Database 12c Spatial: Vector Performance Acceleration

  - by Okcan Yasin Saygili-Oracle

  Most business information has a location component, such as customer addresses, sales territories and physical assets. Businesses can take advantage of their geographic information by incorporating location analysis and intelligence into their information systems. This allows organizations to make better decisions, respond to customers more effectively, and reduce operational costs – increasing ROI and creating competitive advantage. Oracle Database, the industry’s most advanced database,  includes native location capabilities, fully integrated in the kernel, for fast, scalable, reliable and secure spatial and massive graph applications. It is a foundation for deploying enterprise-wide spatial information systems and locationenabled business applications. Developers can extend existing Oracle-based tools and applications, since they can easily incorporate location information directly in their applications, workflows, and services. Spatial Features The geospatial data features of Oracle Spatial and Graph option support complex geographic information systems (GIS) applications, enterprise applications and location services applications. Oracle Spatial and Graph option extends the spatial query and analysis features included in every edition of Oracle Database with the Oracle Locator feature, and provides a robust foundation for applications that require advanced spatial analysis and processing in the Oracle Database. It supports all major spatial data types and models, addressing challenging business-critical requirements from various industries, including transportation, utilities, energy, public sector, defense and commercial location intelligence. Network Data Model Graph Features The Network Data Model graph explicitly stores and maintains a persistent data model withnetwork connectivity and provides network analysis capability such as shortest path, nearest neighbors, within cost and reachability. It loads partitioned networks into memory on demand, overcomingthe limitations of in-memory analysis. Partitioning massive networks into manageable sub-networkssimplifies the network analysis. RDF Semantic Graph Features RDF Semantic Graph has native support for World Wide Web Consortium standards. It has open, scalable, and secure features for storing RDF/OWL ontologies anddata; native inference with OWL 2, SKOS and user-defined rules; and querying RDF/OWL data withSPARQL 1.1, Java APIs, and SPARQLgraph patterns in SQL. Video: Oracle Spatial and Graph Overview Oracle spatial is embeded on oracle database product. So ,we can use oracle installer (OUI).The Oracle Universal Installer (OUI) is used to install Oracle Database software. OUI is a graphical user interface utility that enables you to view the Oracle software that is installed on your machine, install new Oracle Database software, and delete Oracle software that you no longer need to use. Online Help is available to guide you through the installation process. One of the installation options is to create a database. If you select database creation, OUI automatically starts Oracle Database Configuration Assistant (DBCA) to guide you through the process of creating and configuring a database. If you do not create a database during installation, you must invoke DBCA after you have installed the software to create a database. You can also use DBCA to create additional databases. For installing Oracle Database 12c you may check the Installing Oracle Database Software and Creating a Database tutorial under the Oracle Database 12c 2-Day DBA Series.You can always check if spatial is available in your database using  "select comp_id, version, status, comp_name from dba_registry where comp_id='SDO';"   One of the most notable improvements with Oracle Spatial and Graph 12c can be seen in performance increases in vector data operations. Enabling the Spatial Vector Acceleration feature (available with the Spatial option) dramatically improves the performance of commonly used vector data operations, such as sdo_distance, sdo_aggr_union, and sdo_inside. With 12c, these operations also run more efficiently in parallel than in prior versions through the use of metadata caching. For organizations that have been facing processing limitations, these enhancements enable developers to make a small set of configuration changes and quickly realize significant performance improvements. Results include improved index performance, enhanced geometry engine performance, optimized secondary filter optimizations for Spatial operators, and improved CPU and memory utilization for many advanced vector functions. Vector performance acceleration is especially beneficial when using Oracle Exadata Database Machine and other large-scale systems. Oracle Spatial and Graph vector performance acceleration builds on general improvements available to all SDO_GEOMETRY operations in these areas: Caching of index metadata, Concurrent update mechanisms, and Optimized spatial predicate selectivity and cost functions. These optimizations enable more efficient use of: CPU, Memory, and Partitioning Resulting in substantial query performance improvements.UsageTo accelerate the performance of spatial operators, it is recommended that you set the SPATIAL_VECTOR_ACCELERATION database system parameter to the value TRUE. (This parameter is authorized for use only by licensed Oracle Spatial users, and its default value is FALSE.) You can set this parameter for the whole system or for a single session. To set the value for the whole system, do either of the following:Enter the following statement from a suitably privileged account:   ALTER SYSTEM SET SPATIAL_VECTOR_ACCELERATION = TRUE;Add the following to the database initialization file (xxxinit.ora):   SPATIAL_VECTOR_ACCELERATION = TRUE;To set the value for the current session, enter the following statement from a suitably privileged account:   ALTER SESSION SET SPATIAL_VECTOR_ACCELERATION = TRUE; Checkout the complete list of new features on Oracle.com @ http://www.oracle.com/technetwork/database/options/spatialandgraph/overview/index.html Spatial and Graph Data Sheet (PDF) Spatial and Graph White Paper (PDF)

  Read the article

• What Did You Do? is a Bad Question

  - by Ajarn Mark Caldwell

  Brian Moran (blog | Twitter) did a great presentation today for the PASS Professional Development Virtual Chapter on The Art of Questions.  One of the points that Brian made was that there are good questions and bad (or at least not-as-good) questions.  Good questions tend to open-up the conversation and engender positive reactions (perhaps even trust and respect) between the participants; and bad questions tend to close-down a conversation either through the narrow list of possible responses (e.g. strictly Yes/No) or through the negative reactions they can produce.  And this explains why I so frequently had problems troubleshooting real-time problems with users in the past.  I’ll explain that in more detail below, but before we go on, let me recommend that you watch the recording of Brian’s presentation to learn why the question Why is often problematic in the U.S. and yet we so often resort to it. For a short portion (3 years) of my career, I taught basic computer skills and Office applications in an adult vocational school, and this gave me ample opportunity to do live troubleshooting of user challenges with computers.  And like many people who ended up in computer related jobs, I also have had numerous times where I was called upon by less computer-savvy individuals to help them with some challenge they were having, whether it was part of my job or not.  One of the things that I noticed, especially during my time as a teacher, was that when I was helping somebody, typically the first question I would ask them was, “What did you do?”  This seemed to me like a good way to start my detective work trying to figure out what happened, what went wrong, how to fix it, and how to help the person avoid it again in the future.  I always asked it in a polite tone of voice as I was just trying to gather the facts before diving in deeper.  However; 99.999% of the time, I always got the same answer, “Nothing!”  For a long time this frustrated me because (remember I’m in detective mode at that point) I knew it could not possibly be true.  They HAD to have done SOMETHING…just tell me what were the last actions you took before this problem presented itself.  But no, they always stuck with “Nothing”.  At which point, with frustration growing, and not a little bit of disdain for their lack of helpfulness, I would usually ask them to move aside while I took over their machine and got them out of whatever they had gotten themselves into.  After a while I just grew used to the fact that this was the answer I would usually receive, but I always kept asking because for the .001% of the people who would actually tell me, I could then help them understand what went wrong and how to avoid it in the future. Now, after hearing Brian’s talk, I understand what the problem was.  Even though I meant to just be in an information gathering mode, the words I was using, “What did YOU do?” have such a strong negative connotation that people would instinctively go into defense-mode and stop sharing information that might make them look bad.  Many of them probably were not even consciously aware that they had gone on the defensive, but the self-preservation instinct, especially self-preservation of the ego, is so strong that people would end up there without even realizing it. So, if “What did you do” is a bad question, what would have been better?  Well, one suggestion that Brian makes in his talk is something along the lines of, “Can you tell me what led up to this?” or “what was happening on the computer right before this came up?”  It’s subtle, but the point is to take the focus off of the person and their behavior; instead depersonalizing it and talk about events from more of a 3rd-party observer point of view.  With this approach, people will be more likely to talk about what the computer did and what they did in response to it without feeling the interrogation spotlight is on them.  They are also more likely to mention other events that occurred around the same time that may or may not be related, but which could certainly help you troubleshoot a larger problem if it is not just user actions.  And that is the ultimate goal of your asking the questions.  So yes, it does matter how you ask the question; and there are such things as good questions and bad questions.  Excellent topic Brian!  Thanks for getting the thinking gears churning! (Cross-posted to the Professional Development Virtual Chapter blog.)

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

  - by JuergenKress

  You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

< Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >