Search Results

Search found 5322 results on 213 pages for 'answers'.

Page 88/213 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Which ports for IPSEC/LT2P?

  - by Matt

  I have a firewall/router (not doing NAT). I've googled and seen conflicting answers. It seems UDP 500 is the common one. But the others are confusing. 1701, 4500. And some say I need to also allow gre 50, or 47, or 50 & 51. Ok, which ports are the correct ones for IPSec/L2TP to work in a routed environment without NAT? i.e. I want to use the built in windows client to connect to a VPN behind this router/firewall.

  Read the article

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• nslookup gives wrong ip for my domain

  - by Werulz

  I am having some problem in trying to setup DNS for my domain on my server. This tutorial normally works fine for me but when i tried to lookup my domain it gives the following output Server: 4.2.2.1 Address: 4.2.2.1#53 Non-authoritative answer: 119.100.79.64.in-addr.arpa name = server.leech4ever.com. Authoritative answers can be found from: The server and the address are wrong according to the tutorial Here is tutorial http://webcache.googleusercontent.com/search?q=cache:rR7Z4YU4GI0J:www.broexperts.com/2012/03/linux-dns-bind-configuration-on-centos-6-2/+broexperts+bind&cd=1&hl=en&ct=clnk&gl=mu /etc/hosts 127.0.0.1 localhost 64.79.100.119 server.leech4ever.com server /etc/resolve.conf search leech4ever.com nameserver 64.79.100.119 /etc/resolv.conf nameserver 4.2.2.1 nameserver 4.2.2.2 How to solve this problem guys.....The tutorial was flawless until i did a server restore

  Read the article

• Sniff packets using tcpdump

  - by denisk

  I have a completely noob question. I want to see all packets that come to my computer from particular site (google.com). So I start tcpdump sudo tcpdump -i eth0 host google.com and enter google.com in a browser and hit enter - nothing gets captured. I can't figure out why it happen. What do I do wrong? Edit It appeared that I was listening to the wrong interface. I had changed eth0 to any and it worked. It was ppp1 that needed listening. Thanks for your answers!

  Read the article

• How to switch off the monitor when mouse reaches the edge of the screen?

  - by evgeny9

  I have 2 computers at home (Windows XP and Windows 7), but one monitor for both of them. They are connected to this monitor using different interfaces: DVI and VGA. I'm also using one keyboard and one mouse to control both PCs with the help of Synergy or Input Director. But I still need to manually switch between monitor interfaces. I wonder, if there's some way (software) that will switch this interfaces (turn off the monitor), when reach the edge of the screen with the mouse. Until now I found several answers, which help to avoid pressing hardware buttons, but still can not do the job automatically based on mouse pointer coordinates. Thank you.

  Read the article

• Firefox Task Manager [closed]

  - by chris Frisina

  CLOSED!??? I SPECIFICALLY said for OSX, and the previousquestionprovides answers for Windows and other addons are for older versions of FF, or do not answer the question. This is a specific question for OSX. Chrome has a built in task manager under "Tools" to look at the process within Chrome, extremely beneficial in locating a stuck page. What is the similar feature in firefox? I need to identify what is causing it to run slowly, and the addons they suggested dont work for OSX or are outdated, and Chrome's about:memory isn't recognizing FF FF Version 17.0, OSX version 10.8.2 Build 12C3006 How to get to Task Manager: Task Manager: THIS IS NOT A DUPLICATE OF: Possible Duplicate: “Task Manager” addon for Firefox?

  Read the article

• Why does booting from a 64 bit Win 8 USB install work on a 32 bit laptop?

  - by Arabella

  I upgraded a 64 bit Windows 7 laptop to Windows 8 through the Upgrade Assistant, creating a bootable USB without any problems. I installed it successfully. Before I purchased an upgrade for my 32 bit Windows 7 laptop, I decided to boot from the USB with the 64 bit ISO to see what happened. The Windows 8 install screen came up with all the options. Should it not have detected that the laptop is 32 bit and therefore the install should have given an error? I cancelled the install before it did anything, but now I want to know if I need to download the iso again after purchasing the upgrade on my 32 bit laptop? I've read the answers to this question, which confirms what is said in this article - a 32 or 64 bit iso will be downloaded depending on the hardware of the computer you are upgrading. If that is the case, then why did it boot into the install screen?

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• Multiple public keys for one user

  - by Russell

  This question is similar to SSH public key authentication - can one public key be used for multiple users? but it's the other way around. I'm experimenting on using ssh so any ssh server would work for your answers. Can I have multiple public keys link to the same user? What are the benefits of doing so? Also, can different home directories be set for different keys used (all of which link to the same user)? Please let me know if I'm unclear. Thanks.

  Read the article

• Windows 8 safe mode grub 2

  - by Adam Smith

  I need to boot into safe mode in Windows 8 Ultimate to un-install Avira as this is not supported in windows 8. The problem is I have also installed Ubuntu 12.04 and from the grub 2, I do not get the option to boot into windows 8 safe mode. I do not have the CD/DVD of windows 8. Also, "pressing f8 as soon as you press enter after selecting win8 kernel " or for that matter any other key (Shift+F8, F2, F12 ) did not help. Is there a way to get an option in the boot menu to boot into Windows 8 safe mode? Found some similar posts, but could not find any relevant answers. Thanks

  Read the article

• How to rename multiple files in multiple folders with 1 command

  - by Charles

  We want to rename our *.html files to *.php but (sadly enough) have not enough knowledge to do it with a dos batchfile and/or cmd prompt command. The problem is that each file is in seperat folder and yes talking about 1500+ different folder names. Using wildcards for the files I know is the '*' but using also a wildcard for folders is unknown to me. We probably need to use the (MSDOS) 'FOR' command but there I am stucked. Folder structure we use is: parent-folder/child-folder/grandchild-folder/file.html sample: games/A/game_name/file.html, games/B/game_name/file.html, games/C/game_name/file.html and so on. The parent folder is for all files the same, the child & grandchild folders are different for most files. After renaming these files to .php I assume following in the .htaccess will make a permanent redirect. RedirectMatch 301 (.).html$ http://oursite.com$1.php Looking forward to suggestions/answers, thnx in advance.

  Read the article

• What is an Acer Converter Port?

  - by ShadowHero

  What is this port "Acer Converter Port"? Very little information can be found on the internet. It's basically the same as miniDP? Can I connect a monitor like Dell U2713H on this one? EDIT From this page: http://acer.custhelp.com/app/answers/detail/a_id/30837/~/frequently-asked-questions-on-the-aspire-r7-series 9. Can I connect a DisplayPort monitor to the Acer Converter Port? The Acer Converter Port uses the same physical port as a Mini DisplayPort, but is designed to connect to an Acer proprietary cable. If you connect a DisplayPort monitor, Acer cannot guarantee the functionality of the monitor. No damage should occur to either monitor or notebook by connecting a Mini DisplayPort cable. So, the question is, can someone confirm this will work for sure?

  Read the article

• Can only connect to IIS site through localhost

  - by Rembrandt Q. Einstein

  I'm building a web service for my company's iPhone application, and everything's been working smoothly by running tests through localhost on the development machine. I'm now in the phase where I need to test connections from other computers within the network, and any connection other than localhost gives me a 404. My internal IP, 127.0.0.1, and computername all get 404 when connecting from any computer, either the one the site's hosted on or any others on the network. Telnet can get through to port 80, and I've temporarily disabled all firewalls on this machine (I do not have control over the external firewall, but I'm only testing connections within the network) Does anyone have a clue why this is happening? I was able to connect to the web service from other computers when hosted on a Mac via Apache, but because I'm now using a SQL Server connection I'm restricted to using IIS for Windows Authentication. Googling only provided answers related to firewalls, and mine is disabled note: I cannot use Anonymous Authentication, but even in testing that it did not affect the issue.

  Read the article

• Problems bringing up a second virtual network interface

  - by tubaguy50035

  I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

  Read the article

• Creating disk snapshots in Windows 7

  - by Puneet Arora

  Does anyone know of a command or tool to create disk snapshots on Windows 7 (client SKU)? I see vssadmin.exe has a "create shadow" option, but that's available only on server SKUs: http://technet.microsoft.com/en-us/library/cc788055(v=ws.10).aspx I've a backup tool that replicates changes (creations, modifications and deletions to files and directories) since last backup, to my backup volume. Before each time this happens I want to create a persistent snapshot on my backup volume. I could then mount previous snapshots to view previous backups achieving a behavior similar to that of TimeMachine in OS X. This question has been asked before but unfortunately there weren't any good answers: Taking snapshots of filesystem/volume in Windows 7?

  Read the article

• Which server requirment for a Redmine, Git and website hosting?

  - by Ephismen

  Me and 9 other students are going to start a project that will last a minimum of 2 years, for this purpose we are looking to host all our work on a server. Here are a few tools we would like to work with: Redmine GIT Hosting a website/blog to show our work Hosting an internal and private development website/blog We haven't decided yet which OS we will install, but we were looking toward Ubuntu or Fedora. Having a limited budget, 300$/year, we would like to have some advices on the following dedicated server specifications: Kimsufi 2G: Hardware: Intel Celeron/Atom, 1.20 Ghz, 64 bits, 2Gb DDR2, HDD 1 To, Backup FTP 100Gb Network: Connection 100 Mbps, Illimited trafic Dedibox SC: Hardware: Dell Nano U2250, 1x 1,6GHz, 64 bits, 2Gb DDR2, HDD 160 Gb Network: Connection 1Gbit/sec, Illimited trafic Will these server be sufficient? Should we host the websites on another platform? Would a virtualized server be more appropriate? Thank you for your answers, Ephismen.

  Read the article

• PackageForTheWeb "should not be executed directly"

  - by Sergei Ousynin

  When trying to install package (specifically, chipset drivers for Nexcom PEAK-series computer, but I guess it doesn't really matters) I get "PackageForTheWeb Error" saing "This program is used internally by PackageFromTheWeb. It should not be executed directly." I get this error on both Windows 2000 (where it should be installed) and Windows 7. The original driver CD was lost long time ago, so the package was downloaded from the Nexcom website, found no info about installer prerequisites there. What should I install (or anything else) to install this package? UPD: I found a solution - unpacked the package and executed setup.exe that was inside. But I'm pretty sure it's not an action supposed by vendor, so answers are still welcome.

  Read the article

• How to turn off Firefox forms autocomplete for only certain websites, or for all sites temporarily?

  - by Jason

  I want to turn off Firefox autocomplete, but only for specific websites--not for the entire interwebs. My language course has an online workbook, and the autocomplete keeps giving me the answers if I need to re-do an exercise. The tutorials I've found online all tell me to clear out my form history. I don't want to do this. I just want autocomplete to not work for a specific set of websites, or alternately turn it off temporarily. How can I do this?

  Read the article

• what to do when ctrl-c can't kill a process?

  - by Dustin Boswell

  Ctrl-c doesn't always work to kill the current process (for instance, if that process is busy in certain network operations). In that case, you just see "^C" by your cursor, and can't do much else. What's the easiest way to force that process to die now without losing my terminal? Summary of answers below: Usually, you can Ctrl-z to put the process to sleep, and then do "kill -9 process-pid", where you find the process's pid with 'ps' and other tools. On Bash (and possibly other shells) you can do "kill -9 %1" (or '%N' in general) which is easier. If Ctrl-z doesn't work, you'll have to open another terminal and kill from there.

  Read the article

• Can I fine-tune my screen brightness? (Ubuntu Studio, Thinkpad T420s)

  - by Dan S

  I am in a similar situation as question Can I fine-tune my screen brightness? . For me, Thinkpad T420s and Ubuntu Studio 11.10. The brightness keys work fine but the increments are too large. I have the /sys/class/backlight/acpi_video0 and I can see the value of actual_brightness changing as I use the brightness keys - it changes between values 0,3,6,9,12,15. None of the listed answers for fine control works here, as follows: As the root user I can echo integers to brightness in the above folder. As an ordinary user I cannot. I do not have /usr/sbin/gnome-power-backlight-helper (because I'm using xfce perhaps?), and not sure what package it's from or if installing such a package would make sense since it's not what's currently managing the backlight. How can it be done, please?

  Read the article

• Running Coldfusion Commands inside an HTML File?

  - by KM01

  Hello, Is it possible to run CF commands inside an HTML file by updating Apache configs/htaccess file? When I searched online, I didn't come across any answers for CF, saw several posting for PHP (perhaps I am not searching for the right terms ... ?). Specifically, we have CF 6 (I know, don't say it) on Solaris, and Apache 2, and was thinking of using this line: AddType application/x-httpd-coldfusion .html so we can use cfinclude inside the HTML files, but this did not work. Your time, ideas and thoughts are much appreciated! KM

  Read the article

• Keyboard shortcut / navigation references

  - by jerryjvl

  I use the mouse much too freely, and my wrists are not thanking me for it. I have been meaning to try and use the keyboard more as my sole means of navigating Windows, but I am having trouble sticking with it because when I need to do something and I cannot find the right shortcut, I grab the mouse and forget to let go of it again. Personally, the main software that I need keyboard reference sheets for would be: Firefox Thunderbird Visual Studio Windows itself But I would encourage more general inclusion of shortcut references in the answers in case anyone else tries to make the same transition I am attempting ;) What I am looking for is reference material that is as comprehensive as possible so that over time I can hopefully learn to do everything with the keyboard and spare my wrists. Bonus points for references that can be printed in a reasonable size so I can keep them next to my machine in hardcopy. I know there is an answer for Windows already: Is there a definitive reference for Windows shortcuts keys?, but I am leaving it in my question in case anyone has a better printable alternative.

  Read the article

• Choose IP Adress for Process to use on launch [duplicate]

  - by user1436026

  This question already has an answer here: How to set which IP to use for a HTTP request? 2 answers Say my server has the following IP addresses: 123.456.78.0 123.467.79.1 123.456.77.1 123.456.68.0 etc... Say I want to launch a process, say wget from the command line. Normally, I would do something like this: wget http://www.google.com/ Except that I would like to choose the IP address that my server uses to make this request. Is there a way to use wget or launch another command with a choice of one of my own IP addresses, like the following pseudo command: with-ip 123.456.68.0 wget http://www.google.com/

  Read the article

• Hopping a VPN Tunnel

  - by lellouch

  My central office and remote offices are connected to each other over site to site ipsec vpn. We use Fortigate firewalls and everything is working fine. On the other hand, only central office is also connected to another company's network over ipsec vpn as well. In this situation, everything is also fine and employees at the central office is able to reach the other company's resources without problem. Now i want the employees working on our remote office can reach the other company's network over central office without creating new vpn tunnels. http://imgur.com/ozrXfGv How can i do that? Thanks for your answers in advance.

  Read the article

• How to create a new user group and add user to it in Ubuntu 12.04

  - by Omal Lasitha

  My OS is Ubuntu 12.04.1 Desktop version (32bit). I want to create a new group called restricted which allows its users to use Audio devices and Video devices only, and I want to add a user called visitors to that group. By using Users and Groups, I was able to create a new user account called visitors, and a new group called restricted. But I can't figure out how to add those settings to the group restricted, and add the visitors user account to that group. I tried Google-ing, but every search result was about accessing root privileges and all, and I couldn't find answers on this specific topic.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >