Search Results

Search found 97876 results on 3916 pages for 'user folder'.

Page 881/3916 | < Previous Page | 877 878 879 880 881 882 883 884 885 886 887 888  | Next Page >

  • Using Zebra LP 2844-Z over the network

    - by Jason Kealey
    Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

    Read the article

  • Mac OS X L2TP VPN won't connect

    - by smokris
    I'm running Mac OS X Server 10.6, providing an L2TP VPN service. The VPN works just fine when connecting from all computers except one --- this one computer stays at the "Connecting..." stage for a while, then says "The L2TP-VPN server did not respond". In the console, I see this: 6/7/10 10:48:07 AM pppd[341] pppd 2.4.2 (Apple version 412.0.10) started by jdoe, uid 503 6/7/10 10:48:07 AM pppd[341] L2TP connecting to server 'foo.bar.baz.edu' (256.256.256.256)... 6/7/10 10:48:07 AM pppd[341] IPSec connection started 6/7/10 10:48:07 AM racoon[342] Connecting. 6/7/10 10:48:07 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 1). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 2). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 3). 6/7/10 10:48:08 AM racoon[342] IKE Packet: receive success. (Initiator, Main-Mode message 4). 6/7/10 10:48:08 AM racoon[342] IKE Packet: transmit success. (Initiator, Main-Mode message 5). 6/7/10 10:48:11 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:14 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). 6/7/10 10:48:17 AM racoon[342] IKE Packet: transmit success. (Phase1 Retransmit). ...and the "retransmit" messages continue until the error message pops up. So far I've unsuccessfully tried: rebooting deleting the VPN profile and recreating it verifying the client's internet connection (it is able to reach the VPN server) connecting through several different networks (in case a router was blocking VPN packets) disabling the Mac OS X Firewall on the client making sure that the VPN settings exactly match those of other working computers running software update (the client is on 10.6.3) Any ideas?

    Read the article

  • Why does Adobe Acrobat Reader require a restart on update?

    - by White Phoenix
    Why does Adobe Acrobat Reader require a restart when you update it? It's a piece of software that reads PDFs. Just what else is it installing/updating that requires a total OS reboot to "complete" the installation? A bit of Googling indicates that it's to allow the OS to install the Adobe "Speed Launcher" - is this it or are there other components that are more tightly into the OS that it must absolutely have to have closed so that it can update them?

    Read the article

  • Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

    - by Sid
    I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

    Read the article

  • ethernet not working

    - by good boy
    i wanted to know how do i setup an ethernet connection on a laptop,my isp gave me a telephone like cable which fits the ethernet port. i guess its the ethernet cable. when i connect it, nothing happens on the pc the ethernet card(realtek pcie gbe family controller) says cable not plugged in. i am using wired connection for first time.the system is completely stable with softwares .the drivers are also automatically updated through a manufacturer installed update system. the isp says there must be some sort of light on the port. whats the problem? how do get it working.

    Read the article

  • vista wireless adapter not working

    - by Sam Adams
    After this script gets called http://blogs.technet.com/b/heyscriptingguy/archive/2008/09/29/how-can-i-enable-or-disable-my-network-adapter.aspx 50 times over a 12 hour span, disabling wireless/enabling wired, followed by enabling wireless/disabling wired, the wireless adapter stops finding connections entirely, even if it is enabled, needing a reboot. vista, powershell 1.0 (for some reason vista is not accepting powershell 2 for an update), 32 bit, intel R pro /wireless 3945ABG adapter. Any reasons why, thanks.

    Read the article

  • Detect if any USB drive is detected or if not using WinForm Application in Visual C#

    - by Pavan Kumar
    I want to do the following things in my application 1) I want to display whether any USB drive is inserted or not in my application to prompt the user to insert a USB drive. I just want to notify the user if any USB dirve is inserted else prompt him to insert one using a label or something (i want to avoid messagebox as it will keep appearing whenever a device is inserted or removed. It will be irritating for the end user) in my Visual C# WinForm Application. If any USB drive is present display "USB drive detected" in the label. The user may add one or more USB sticks but the status will remain same. When there is none then the status of the label will change to "No USB drives found.Please insert a USB drive". 2) When one or more USB drive is added the volume name with the drive letter for example "James(F:)" is added to the Combobox list. The combobox list also needs to remove the entry for the USB drive added in the list automatically when it is removed . So when there is no USB the list should be empty and the label will again prompt user to insert a USB stick or drive.

    Read the article

  • Ubuntu 10.10 strange USB file Permissions

    - by Christian Hubinger
    Hi, I'm developing a cross-plattform application that is delivered an run dirctly form an USB stick. As FAT32 ist the only FS working well for this (rw on windos/linux/mac) we use it as the FS for the stick. My Problem is that from Ubuntu 10.4 - 10.10 something changed at mounting the stick is mounted with files: rw-rw-r directories: rwxrwxr-x and (that is really strange) the Win32 Version of the application app.exe: rwxrwxr-x I tried for quit a while to find out where this is configured but could not find it - simple udev rule with MODE="0777" simpyl gets ignored. Any kind of idea help is very, very welcome, as not being able to find a solution for this is a real show stopper. thanks in advance and kind regards, Chris

    Read the article

  • Fixing Corrupted Text

    - by oort
    I Have text which looks like this: supposed to undergo yearly cardiac exam in order to stay on transplant list. But, there are patients who are missing important cardiac information. It is yo ur job as an intern on call to make sure that you fin As you can see, the first line is fine, but then the second line is corrupt. It looks like this even when I open it using Vim or LibreOffice. Is there a way to fix this? I've tried changing the encoding to UTF-8 but to no avail. Thanks!

    Read the article

  • mplayer dumpstream sometimes fails

    - by User1
    I'm trying to rip the video at http://videolectures.net/ecml07%5Fgetoor%5Fisr/, so I can play it at a faster speed. I paste http://193.2.4.216/2007/pascal/ecml07%5Fwarsaw/getoor%5Flise/ecml07%5Fgetoor%5Fisr%5F01.wmv into a firefox browser in Windows and MediaPlayer plays the thing. However if I try mplayer -dumpstream, it gets stuck into an infinite loop trying to play the file. If I use wget to download the link, I get a small text file which basically points to the same URL. How can I get mplayer to download this stream?

    Read the article

  • Is it possible to use a dual processor computer as your desktop?

    - by Ivo
    I've seen some people suggesting to get a motherboard that supports two processors and stick two Xeon Nehalem processors in it. Could you use this system as a desktop PC or is this useless or even impossible? It's more hypothetical question if Windows 7 would support such a set-up. I know you could just take an i7, but wouldn't two of those processors be a whole lot more awesome? Like the previous generation Skulltrails? The idea would be to have a motherboard like this ASUS Z8NA-D6C Dual LGA 1366 Intel 5500 ATX and two Xeons (since I don't think i7's could be used) Intel Xeon E5405 Harpertown to run something like Windows 7 Ultimate.

    Read the article

  • Ubuntu Lucid startup events

    - by Lakshman Prasad
    On starting up Ubuntu, I seem to have to do the following, all the time: Enter the password for the keyring to unlock, so that it connects to wifi Enable the "Extra" Visual effects from the Appearances preferences Start skype. How can I automate all of these. Bonus points, if I can use the existing chat bundled in the system to use my skype account. Also, since I dual boot, I get the grub options initially to select Windows or Ubuntu that waits for 10 seconds for me to choose. How do I make it go to ubuntu, unless I explicitly not press a key to boot to windows. Thanks in advance.

    Read the article

  • About Load average in htop, how to decide if it's still doing ok?

    - by Joe Huang
    I use 'htop' to monitor my web server. It's recently quite loaded and the Load average is showing something like this: Load average: 3.10 2.56 1.63 I searched the web about these numbers and I found an article about it: http://blog.scoutapp.com/articles/2009/07/31/understanding-load-averages In the article, it says if I have 2 CPUs, 2.0 means 100% CPU utilization. And my VPS has two CPUs, so what does 3.1 mean? How could it exceed 100% CPU utilization? And from these numbers, does it mean I should be wary about the loading now? But the performance seems totally fine, and this is a managed VPS, the hosting company has not notified me any warning about it. During day time, Load average always show these high numbers... here is another snapshot while writing. Load average: 3.03 2.77 1.97 Load average: 0.41 1.29 1.60 <---- 5 more minutes later So I am wondering how much room left for this site to grow in current configurations? What kind of proactive actions I should take in advance? I don't want to wait until the server bursts. Thanks.

    Read the article

  • Wireless VGA for a projector

    - by Andrew
    I am in need of a wireless VGA suitable for around 30m range and available in Australia. Something just like IOgears GUWAVKIT http://www.iogear.com/product/GUWAVKIT/ But it needs to be available in Australia. And do the 30m range.

    Read the article

  • How can I make it difficult to install a new operating system on a certain computer?

    - by D W
    I want to host a website on a desktop computer running Ubuntu with a Windows virtual machine. I will give away the computer in exchange for a number of months of remote web hosting. I want to add some kind of lock (hardware or otherwise) so that the end users will have difficulty just reinstalling Windows and using the machine as they want, in contradiction to the contract. Ideally, I'd want the machine to die if reinstallation of the OS is attempted. It doesn't have to be completely insurmountable, but it has to be difficult enough to prevent casual reinstallation. Perhaps on bootup the system can check whether certain files exist on the computer and refuse to boot if they do not. I don't know if this is possible, but maybe BIOS is password protected, and searches for files before boot up. The files it looks for could be date sensitive, i.e. require remote replacement on a schedule.

    Read the article

  • How can I move this file away?

    - by Tim
    I have identified the file that prevent me from further shrinking C: partition for Windows 7 OS. By query shrinking and then checking Event Viewer, this is the file: The last unmovable file appears to be: \ProgramData\Microsoft\Search\Data\Applications\Wi ndows\Projects\SystemIndex\Indexer\CiFiles\0001001 5.wid::$DATA I was wondering how to move this file away? I guess I have to move the whole \ProgramData away, not just that file?

    Read the article

  • Error loading operating system: format Windows 7 to Windows XP Service Pack 3

    - by Blerta
    I saw that there are other questions like mine here. But O also saw that some problems where solved with fixmbr from a Windows 7 recovery console, but that didn't work for me. I bought my laptop with Vista installed and later reformated and used Windows 7. During formatting with Windows 7 I had some problems with my hard drive and found out it was dead so I bought a new one. I wanted to reformat with Windows XP,because Windows 7 is consuming more RAM that it is able handle and I wanted to use it for other programs. So I formatted with Windows XP Service Pack 3 but after first reboot a message appeared: "Error loading operating system" Reading here, I assumed that maybe I had installed it on the wrong partition and maybe having two OS now, so I used fixmbr but it is still not starting up. Anyway I am sure that is not the case of two operating systems. Is there any chance that when the computer designed to work with Vista you would face problems with Windows XP? Like not recognizing a hard drive?

    Read the article

  • Mirror a RAID0 volume

    - by Ghostrider
    I have two SSD running in RAID0. The capacity and speed are just great. I use Windows Home Server to do incremental daily backups. This is fine and well and I've successfully restored from these backups. However. When one of the disks physically died. I was stuck without a working system until the replacement arrives so that I can restore the array from backup. WHS restoration takes about 5 hours which basically means that I'm losing entire day for the process. Is it possible to set up kind of a recovery volume for the RAID array? Use a single mechanical HDD that would be updated with the exact clone of the RAID array on a daily basis. This way if the array goes offline for some reason, I can just boot from the mechanical HDD, lose some perf but will still be able to work. The machine in question runs Windows 7. Creating RAID01 is not an option because of the high price of the SSD and the fact that it still doesn't protect against failure of RAID controller. Is there any way it can be set up?

    Read the article

  • Task Manager Does Not Start Every Time

    - by diek
    I have had a problem that started some time ago, 6 months maybe. I should have noted the first instance but I didn't. I am using Windows 7 Pro, 32bit. Under normal circumstances I can open up the the Task Manager, via the task bar or cntrl alt del. When I get a program stuck, causing a freeze or non-responsive system I try to open the task manager. It will not work. I have had plenty of similar problems in the past and I had no trouble getting it open. I have searched the internet but the only results I can find are when the task manager will not start under any situation. I am running ESET NOD32 as the anti-virus. The latest example happened when I opened a new tab in Google and tried to copy an image. Google accounts for at least 50% of the examples. Ran System File Checker tool, sfc /scannow as recommended on another post. No errors returned. Any guidance would be appreciated.

    Read the article

  • Security Essentials not installing and I suspect my machine is infected with malware

    - by Jim
    My mouse seems to be automatically right-clicking every few seconds, and sometimes constantly. My cursor will abruptly become an hourglass for a moment every once in a while, as well. It happens in spurts, as in it hasn't happened for about 10 minutes, but the preceding 20 before that it was happening constantly. I suspect that my machine is infected with malware of some sort, so I've tried installing Microsoft Security Essentials, but it presents the following error upon installation failure: My questions are: How can I solve the MSE installation issue and run a scan? Are there any indications that malware isn't actually my issue? Is MSE my best way to go about solving my issue, assuming that malware actually is the problem? Many thanks!

    Read the article

  • How can I run a speed test for Netflix and Hulu?

    - by Brennan Stehling
    Since the FCC rules were struck down I have noticed that Netflix and Hulu often stall on my Time Warner home connection. I've heard others are experiencing the same delays. I use Speedtest.net regularly from my computer and phone to check my connection and typically at home I get 10 to 15Mbps and occasionally higher. Currently it is around 10Mbps yet Hulu is stalling. Is there a way to specifically test my speeds for streaming Netflix and Hulu?

    Read the article

  • 2 ATI Radeon HD 5870 (crossfire): Intermittent loud fan and non-functioning secondary card

    - by Merritt
    Installed 2 5870s. Left off the left side panel of my case(cooler master haf x), started my computer, installed the drivers and set up the crossfire... yada yada yada... everything worked fine. Then turned off computer, put left side panel back on, turned on computer, and heard a very loud buzzing (asssuming it was a gpu fan). Checked status of cards (in Windows 7) and the secondary card did not appear. Turned off the computer, took off left side panel, jiggled power connectors into secondary card, then turned the computer back on, and it worked again. Put the panel on, turned on computer, worked. Sometime later, turned on computer, and there's that loud fan sound again. What gives?

    Read the article

  • Realtek HD Audio 5.1 Optical Input (from Xbox 360)

    - by Shevek
    I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

    Read the article

< Previous Page | 877 878 879 880 881 882 883 884 885 886 887 888  | Next Page >