Search Results

Search found 25400 results on 1016 pages for 'enable manual correct'.

Page 89/1016 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • WMI Rights required to read root\MicrosoftIISv2 in IIS7 with IIS6 compatibility mode

    - by JoeBilly
    I need to manage my IIS7 (Windows Server 2008) remotely with a WMI IIS6 API. So I added the IIS6 WMI Compatibility and IIS6 Metabase Compatibility roles to access the root\MicrosoftIIsv2 namespace. I have a domain account which is not administrator on the remote machine ; with this right, everything is ok. I configured these rights for my domain account to access the root\MicrosoftIIsv2 WMI namespace remotely ; note that these rights work perfectly on a IIS6 and Windows Server 2003 : DCOM : Account in Distributed COM Users Remote & local access to DCOM WMI : Root\CIMV2 (I need access here too) Execute methods, Enable Account, Remote Enable Root\Default (I need access here too) Execute methods, Enable Account, Remote Enable Root\MicrosoftIISv2 Execute methods, Enable Account, Provider Write, Remote Enable IIS Metabase (Metabase Explorer) : LM Full Control (W3SVC inherits these permissions) I tried to give some access on C:\Windows\System32\inetsrv too ; don't know if needed. My issue is : I can't list the IIS WebSites (\root\MicrosoftIISv2:IIsWebServerSetting.Name="W3SVC/*"). I don't get an 'access denied' but nothing is returned. My API and powershell tests can connect and execute queries in the root\MicrosoftIISv2 namespace I can read the IIsComputer class ex: Get-WmiObject IIsComputer -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT * I can't read the IIsWebServerSetting, IIsWebServer ... to list the WebSites : the query returns an empty collection ex: Get-WmiObject IIsWebServerSetting -namespace "ROOT\MicrosoftIISv2" -authentication PacketPrivacy | SELECT ServerComment All queries work perfectly if the account is administrator as already said I am using PacketPrivacy authentication FI: I got a Warning Event 5605 with the Administrator right or not, that does not seem to have an impact : The root\MicrosoftIISv2 namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy and run the script or application again Ok, I have some more informations, when I use IIS 6 Metabase Explorer with my administrator account I can see the rights are correctly inherited for my non-administrator account. But when I try to connect using my non-administrator account, I can list the LM node, but get an "access denied, failed to get a key's data" when I try to browse the child nodes. I'll check further. I tried to Trace the WMI Activity, and everything seems OK ; this tends to confirm that the problem lies in IIS Rights.

    Read the article

  • Does enabling SMB2 on a NetApp filer require a cifs restart?

    - by Sim
    I would like to enable SMB2 on a FAS 2050 running Data ONTAP 7.3.2 as by default it is disabled. I have discovered that to enable SMB2 the following option must be set: options cifs.smb2.client.enable on Does this require a restart of cifs to take affect or just does it start working magically? Also will this change persist across a reboot?

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • How to upgrade Apache 2 from 2.2 to 2.4

    - by Nina
    I was in the process of doing a test upgrade from Apache 2.2 to 2.4.3. I'm using Ubuntu 10.04. I would have upgraded to 12.04 for this to see if the upgrade would go a lot smoother. Unfortunately, I was told it wasn't an option...so I'm stuck using 10.04. The process I did this was: Before attempting this, I have managed to upgrade APR from 1.3 to 1.4 as well since apache told me it was a requirement beforehand: http://apr.apache.org/download.cgi First remove all traces of the current apache: sudo apt-get --purge remove apache2 sudo apt-get remove apache2-common apache2-utils apache2.2-bin apache2-common sudo apt-get autoremove whereis apache2 sudo rm -Rf /etc/apache2 /usr/lib/apache2 /usr/include/apache2 Afterwards, I did the following: sudo apt-get install build-essential sudo apt-get build-dep apache2 Then install apache 2.4 with the following: wget http://apache.mirrors.tds.net//httpd/httpd-2.4.3.tar.gz tar -xzvf httpd-2.4.3.tar.gz && cd httpd-2.4.3 sudo ./configure --prefix=/usr/local/apache2 --with-apr=/usr/local/apr --enable-mods-shared=all --enable-deflate --enable-proxy --enable-proxy-balancer --enable-proxy-http --with-mpm=prefork sudo make sudo make install After the make install, I ended up getting a series of errors that prevented it from installing correctly: exports.c:2513: error: redefinition of 'ap_hack_apr_uid_current' exports.c:1838: note: previous definition of 'ap_hack_apr_uid_current' was here exports.c:2514: error: redefinition of 'ap_hack_apr_uid_name_get' exports.c:1839: note: previous definition of 'ap_hack_apr_uid_name_get' was here exports.c:2515: error: redefinition of 'ap_hack_apr_uid_get' exports.c:1840: note: previous definition of 'ap_hack_apr_uid_get' was here exports.c:2516: error: redefinition of 'ap_hack_apr_uid_homepath_get' Looking for exports.c only leads me back to the httpd-2.4.3 folder. So I'm not sure what these errors mean... Thanks in advance for any help you have to offer!

    Read the article

  • Initial Cisco ASA 5510 Config

    - by Brendan ODonnell
    Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

    Read the article

  • Reinserted a RAID disk. Defined as foreign. Is import or clear the correct choice?

    - by Petrus
    I have re-inserted a RAID disk, on a DELL server with Windows Server 2008. The drive-status indicator was changing between a green and amber light, and the monitor gave the following message: There are offline or missing virtual drives with preserved cache. Please check the cables and ensure that all drives are present. Press any key to enter the configuration utility. I pressed a key and the PERC 6/I Integrated BIOS Configuration Utility showed that the RAID Status for that disk was Offline. After reinsertion of the disk the monitor is giving the following message: Foreign configuration(s) found on adapter. Press any key to continue or ‘C’ load the configuration utility, or press ‘F’ to import foreign configuration(s) and continue. After checking around on the net I am uncertain if I should choose import or clear. I cannot find out if an import means importing information from the array/system to the now foreign disk or the other way, i.e. importing information from the foreign disk to the array/system that was actually working fine. Also; if clear is a necessary thing to do ahead of a rebuild of that disk, or if clear means to clear the system to somehow make it ready to import the information from the foreign disk to the array/system, which is not what I want. I imagine that making the wrong choice here might be fatal. Please help clearing this out by telling what to choose and why.

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • Error in Bind9 named.conf file. Bind won't start.

    - by tj111
    I'm trying to setup a DNS server on an Ubuntu Server machine (10.04). I configured an entry in named.conf.local to test it, but when trying to restart bind9 I get the following error: * Starting domain name service... bind9 [fail] So I checked the output of syslog and this is what I get. May 20 18:11:13 empression-server1 named[4700]: starting BIND 9.7.0-P1 -u bind May 20 18:11:13 empression-server1 named[4700]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' May 20 18:11:13 empression-server1 named[4700]: adjusted limit on open files from 1024 to 1048576 May 20 18:11:13 empression-server1 named[4700]: found 4 CPUs, using 4 worker threads May 20 18:11:13 empression-server1 named[4700]: using up to 4096 sockets May 20 18:11:13 empression-server1 named[4700]: loading configuration from '/etc/bind/named.conf' May 20 18:11:13 empression-server1 named[4700]: /etc/bind/named.conf:10: missing ';' before 'include' May 20 18:11:13 empression-server1 named[4700]: loading configuration: failure May 20 18:11:13 empression-server1 named[4700]: exiting (due to fatal error) So it thinks I have an error in the default named.conf file, which is pretty ridiculous. I went through it and deleted a blank line just for the hell of it, but I can't see how it figures there's an error in there. Note that before this I did have an error in named.conf.local, but it showed up properly in syslog and I fixed it, so it is reporting the correct file. Here is the contents of named.conf: // This is the primary configuration file for the BIND DNS server named. // // Please read /usr/share/doc/bind9/README.Debian.gz for information on the // structure of BIND configuration files in Debian, *BEFORE* you customize // this configuration file. // // If you are just adding zones, please do that in /etc/bind/named.conf.local include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones";

    Read the article

  • Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

    - by milkandtang
    I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

    Read the article

  • Loss of feature set with VMware EVC

    - by Peter
    If I have two machines both 3rd Generation AMD Opteron, one Shanghai & one Istanbul and I can vMotion between them. Does it buy me anything to enable EVC at the 3rd Generation AMD level? Will I lose any CPU features? My thoughts are, I can enable EVC 3rd Generation with running VMs and I can't enable 2nd Generation EVC with running VMs. I figure there won't be a lose in any features because if there was a reduction in feature set then I couldn't enable EVC with running VMs.

    Read the article

  • VirtualBox: Host OS processor is spiked while guest OS virtual processor is idle?

    - by Greg Mattes
    I'm running Windows XP 32-bit on Windows Vista 64-bit with VirtualBox 3.0.6. Whenever I run the XP VM, Vista (host) reports 100% cpu utilization even though XP (guest) reports between 1-5% cpu utilization. The host box has 2 GB of physical RAM. The guest/vm is configured with 512 MB. The host box has a 64-bit AMD processor. No apps (other than VirtualBox) are running on either host, they're just idling. Any guesses as to why the host processor is spiked? I've enabled various advanced features for the XP guest in the hopes of having better performance: Settings → System → Motherboard: Enable IO APIC Settings → System → Processor: Enable PAE/NX Settings → System → Acceleration: Enable VT-x/AMD-V and Enable Nesting Paging

    Read the article

  • PHP FastCGI/XML/DOM Configure

    - by James
    Guys, any ideas why when I configure PHP 5.3.1, these options fail? Notice: Following unknown configure options were used: --with-xml --with-dom --enable-fastcgi --enable-discard-path --enable-force-cgi-redirect

    Read the article

  • bind9 named.conf zones size limit

    - by mox601
    I am trying to set up a test environment on my local machine, and I am trying to start a DNS daemon that loads tha configuration from a named.conf.custom file. As long as the size of that file is like 3-4 zones, the bind9 daemon loads fine, but when i enter the config file i need (like 10000 lines long), bind can't startup and in the syslog i find this message: starting BIND 9.7.0-P1 -u bind Jun 14 17:06:06 cibionte-pc named[9785]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jun 14 17:06:06 cibionte-pc named[9785]: adjusted limit on open files from 1024 to 1048576 Jun 14 17:06:06 cibionte-pc named[9785]: found 1 CPU, using 1 worker thread Jun 14 17:06:06 cibionte-pc named[9785]: using up to 4096 sockets Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration from '/etc/bind/named.conf' Jun 14 17:06:06 cibionte-pc named[9785]: /etc/bind/named.conf.saferinternet:1: unknown option 'zone' Jun 14 17:06:06 cibionte-pc named[9785]: loading configuration: failure Jun 14 17:06:06 cibionte-pc named[9785]: exiting (due to fatal error) Are there any limits on the file size bind9 is allowed to load?

    Read the article

  • Can't access shared drive when connecting over VPN

    - by evolvd
    I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

    Read the article

  • How to convert .flv file to .3gp using ffmpeg?

    - by Chetana
    I have converted any video format to 3gp file format using ffmpeg on one server. But on another server it not works. Following is my script: exec("ffmpeg -i test.flv -sameq -acodec libmp3lame -ar 22050 -ab 96000 -deinterlace -nr 500 -s 320x240 -aspect 4:3 -r 20 -g 500 -me_range 20 -b 270k -deinterlace -f flv -y test.3gp "); Can anyone tell me what is wrong in script? Following is my ffmpeg setting: root@ninja [~]# ffmpeg -formats ffmpeg version CVS, build 3277056, Copyright (c) 2000-2004 Fabrice Bellard configuration: --enable-mp3lame --enable-libogg --enable-gpl --disable-mmx --enable-shared built on Jun 17 2009 10:51:43, gcc: 4.1.2 20080704 (Red Hat 4.1.2-44)

    Read the article

  • Trying to install mod_proxy in Apache-Httpd-2.2.15

    - by Dspace
    Hello, I have spent the afternoon trying to install the mod_proxy module into apache. I have tried ./configure --prefix=/opt/apache2 --enable-proxy --enable-proxy-http ./configure --prefix=/opt/apache2 --enable-module=proxy After it finishes installing, navigating to /opt/apache2/modules only shows one file: httpd.exp. It seems that the module is not being installed. Any help is appreciated. Thanks.

    Read the article

  • my linux problems and solutions [closed]

    - by Delirium tremens
    I read somewhere in StackOverflow or StackOverflow Meta that if I had a problem, then solved it myself, I can share the problem and solution with you. How do I? in Linux: remove unneeded packages using apt-get play spc and psf update the system using apt-get in Mint: install lamp install and configure xdebug enable xdebug for cakephp install bazaar colo rename a repository directory when bazaar explorer fails init a repository when bazaar explorer fails use ssh key with launchpad uninstall firefox 3 when synaptic fails install minefield make pearltrees load when flash fails edit clojure documents install compojure create a new compojure project in Kubuntu enable phpmyadmin after installing lamp stop MySQLdb module error in webpy in Ubuntu stop the mouse pointer from disappearing fix the color stop sync read-only filesystem error stop download prompt instead of site enable phpmyadmin after installing lamp enable mod_rewrite after installing lamp

    Read the article

  • PHP 5.4.9 Mysqli issue

    - by Vitaly
    On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

    Read the article

  • What do you do when you need whole-words search in Firefox?

    - by romkyns
    Example: I am looking to see if "arg" is a special keyword in Lua. I go to the Lua reference manual at http://www.lua.org/manual/5.1/manual.html. I search for "arg". I find hundreds of occurrences of the word "argument(s)" or "vararg". Any ideas? I know Firefox won't implement whole words as a core feature (something about cluttering up the ui... argh...), and I couldn't find a good addon that implemented this well.

    Read the article

  • what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

    - by Michael Borgwardt
    When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

    Read the article

  • Allow members of a group to be unlocked by a specific account on AD

    - by JohnLBevan
    Background I'm creating a service to allow support staff to enable their firecall accounts out of hours (i.e. if there's an issue in the night and we can't get hold of someone with admin rights, another member of the support team can enable their personal firecall account on AD, which has previously been setup with admin rights). This service also logs a reason for the change, alerts key people, and a bunch of other bits to ensure that this change of access is audited / so we can ensure these temporary admin rights are used in the proper way. To do this I need the service account which my service runs under to have permissions to enable users on active directory. Ideally I'd like to lock this down so that the service account can only enable/disable users in a particular AD security group. Question How do you grant access to an account to enable/disable users who are members of a particular security group in AD? Backup Question If it's not possible to do this by security group, is there a suitable alternative? i.e. could it be done by OU, or would it be best to write a script to loop through all members of the security group and update the permissions on the objects (firecall accounts) themselves? Thanks in advance. Additional Tags (I don't yet have access to create new tags here, so listing below to help with keyword searches until it can be tagged & this bit editted/removed) DSACLS, DSACLS.EXE, FIRECALL, ACCOUNT, SECURITY-GROUP

    Read the article

  • Encode audio to aac with libavcodec

    - by ryan
    I'm using libavcodec (latest git as of 3/3/10) to encode raw pcm to aac (libfaac support enabled). I do this by calling avcodec_encode_audio repeatedly with codec_context-frame_size samples each time. The first four calls return successfully, but the fifth call never returns. When I use gdb to break, the stack is corrupt. If I use audacity to export the pcm data to a .wav file, then I can use command-line ffmpeg to convert to aac without any issues, so I'm sure it's something I'm doing wrong. I've written a small test program that duplicates my problem. It reads the test data from a file, which is available here: http://birdie.protoven.com/audio.pcm (~2 seconds of signed 16 bit LE pcm) I can make it all work if I use FAAC directly, but the code would be a little cleaner if I could just use libavcodec, as I'm also encoding video, and writing both to an mp4. ffmpeg version info: FFmpeg version git-c280040, Copyright (c) 2000-2010 the FFmpeg developers built on Mar 3 2010 15:40:46 with gcc 4.4.1 configuration: --enable-libfaac --enable-gpl --enable-nonfree --enable-version3 --enable-postproc --enable-pthreads --enable-debug=3 --enable-shared libavutil 50.10. 0 / 50.10. 0 libavcodec 52.55. 0 / 52.55. 0 libavformat 52.54. 0 / 52.54. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 Is there something I'm not setting, or setting incorrectly in my codec context, maybe? Any help is greatly appreciated! Here is my test code: #include <stdio.h> #include <libavcodec/avcodec.h> void EncodeTest(int sampleRate, int channels, int audioBitrate, uint8_t *audioData, size_t audioSize) { AVCodecContext *audioCodec; AVCodec *codec; uint8_t *buf; int bufSize, frameBytes; avcodec_register_all(); //Set up audio encoder codec = avcodec_find_encoder(CODEC_ID_AAC); if (codec == NULL) return; audioCodec = avcodec_alloc_context(); audioCodec->bit_rate = audioBitrate; audioCodec->sample_fmt = SAMPLE_FMT_S16; audioCodec->sample_rate = sampleRate; audioCodec->channels = channels; audioCodec->profile = FF_PROFILE_AAC_MAIN; audioCodec->time_base = (AVRational){1, sampleRate}; audioCodec->codec_type = CODEC_TYPE_AUDIO; if (avcodec_open(audioCodec, codec) < 0) return; bufSize = FF_MIN_BUFFER_SIZE * 10; buf = (uint8_t *)malloc(bufSize); if (buf == NULL) return; frameBytes = audioCodec->frame_size * audioCodec->channels * 2; while (audioSize >= frameBytes) { int packetSize; packetSize = avcodec_encode_audio(audioCodec, buf, bufSize, (short *)audioData); printf("encoder returned %d bytes of data\n", packetSize); audioData += frameBytes; audioSize -= frameBytes; } } int main() { FILE *stream = fopen("audio.pcm", "rb"); size_t size; uint8_t *buf; if (stream == NULL) { printf("Unable to open file\n"); return 1; } fseek(stream, 0, SEEK_END); size = ftell(stream); fseek(stream, 0, SEEK_SET); buf = (uint8_t *)malloc(size); fread(buf, sizeof(uint8_t), size, stream); fclose(stream); EncodeTest(32000, 2, 448000, buf, size); }

    Read the article

  • How do I correct "Commit Failed. File xxx is out of date. xxx path not found."

    - by Ryan Taylor
    I have recently run into a particularly sticky issue regarding committing the result of a merge in subversion. Our Subversion server is @ 1.5.0 and my TortoiseSVN client is now @ 1.6.1. I am trying to merge a feature branch back into my trunk. The merge appears to work okay; however, the commit fails with the following error message. Commit failed (details follow): File 'flex/src/com/penbay/invision/portal/services/http/soap/ReportServices/GetAllBldgsParamsByRegionBySiteResultEvent.as' is out of date '/svn/ibis/!svn/wrk/531d459d-80fa-ea46-bfb4-940d79ee6d2e/visualization/trunk/source/flex/src/com/penbay/invision/portal/services/http/soap/ReportServices/GetAllBldgsParamsByRegionBySiteResultEvent.as' path not found You have to update your working copy first. My working trunk is up to date. I have even checked out a new one into a different folder to make sure there wasn't any local cruft messing with the merge. I have done some more research into this and I think part of the problem is user error. I think our problems are: We had some developers committing work with a subversion client before 1.5 and some after. I believe this has the potential to corrupt the merge info. In other branches we have performed partial merges. That is, we did not always perform merges at the root of the branch. This was to facilitate updating Flex and .NET efforts within the same branch. We performed cyclic (reflexive) merges on our branch. This was done because we had multiple parallel branches and we wanted to periodically update our branch with the latest code in trunk. All of these things are explicitly not recommended by the Subversion book/team. We have learned our lesson and now know the best practices. However, we first need to merge and commit our latest branch. What it the best way to correct the problems we are encountering? Would deleting all the merge info in the trunk and branch be a viable solution? No. I have done this but it does not resolve the error that I am getting above.

    Read the article

  • How to login as other in ubuntu 12.04

    - by murali
    i have upgraded my ubuntu 11.10 to 12.04. i could not see other login option in the login screen. it shows only Guest login and User login. The User Login ask only password and i had never entered in as User login so that i do not know about password of User login. my problem is how to login as root from the login screen? how can i get Other login option to login as root or some other user? before ask this question i have tried the following: try to add the greeter-show-manual-login=true line at the bottom of /etc/lightdm/lightdm.conf file as Guest login but i get access denied error. i do not know the password of User login (ask only password while login) to purpose of adding above line. from the safe mode login, i could login as root but i could not add the above line the lightdm.conf file . i got read only error so that i tried to change the permission to 777 like the following > chmod 777 lightdm.conf (i am within the /etc/lightdm/). but i got the error the file marked as/is read only in the file system. In 11.10 version i have created 4 users. i can see that the users exist in 12.10 . so i am sure my self users are not removed while upgrate. In short, i need Other login option on my login screen? how to get it? please help me. * Edited Question:* i have add the following line the /etc/lightdm/lighdm.conf file on recovery mode greeter-show-manual-login=true and i saved the file using wq command. now my /etc/lightdm/lighdm.conf file looking as the following: [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-show-manual-login=true if i commit any mistake please correct me. by this problem i have wasted the two working day and all the works are in pending... please help me.

    Read the article

  • Announcing: Great Improvements to Windows Azure Web Sites

    - by ScottGu
    I’m excited to announce some great improvements to the Windows Azure Web Sites capability we first introduced earlier this summer.  Today’s improvements include: a new low-cost shared mode scaling option, support for custom domains with shared and reserved mode web-sites using both CNAME and A-Records (the later enabling naked domains), continuous deployment support using both CodePlex and GitHub, and FastCGI extensibility.  All of these improvements are now live in production and available to start using immediately. New “Shared” Scaling Tier Windows Azure allows you to deploy and host up to 10 web-sites in a free, shared/multi-tenant hosting environment. You can start out developing and testing web sites at no cost using this free shared mode, and it supports the ability to run web sites that serve up to 165MB/day of content (5GB/month).  All of the capabilities we introduced in June with this free tier remain the same with today’s update. Starting with today’s release, you can now elastically scale up your web-site beyond this capability using a new low-cost “shared” option (which we are introducing today) as well as using a “reserved instance” option (which we’ve supported since June).  Scaling to either of these modes is easy.  Simply click on the “scale” tab of your web-site within the Windows Azure Portal, choose the scaling option you want to use with it, and then click the “save” button.  Changes take only seconds to apply and do not require any code to be changed, nor the app to be redeployed: Below are some more details on the new “shared” option, as well as the existing “reserved” option: Shared Mode With today’s release we are introducing a new low-cost “shared” scaling mode for Windows Azure Web Sites.  A web-site running in shared mode is deployed in a shared/multi-tenant hosting environment.  Unlike the free tier, though, a web-site in shared mode has no quotas/upper-limit around the amount of bandwidth it can serve.  The first 5 GB/month of bandwidth you serve with a shared web-site is free, and then you pay the standard “pay as you go” Windows Azure outbound bandwidth rate for outbound bandwidth above 5 GB. A web-site running in shared mode also now supports the ability to map multiple custom DNS domain names, using both CNAMEs and A-records, to it.  The new A-record support we are introducing with today’s release provides the ability for you to support “naked domains” with your web-sites (e.g. http://microsoft.com in addition to http://www.microsoft.com).  We will also in the future enable SNI based SSL as a built-in feature with shared mode web-sites (this functionality isn’t supported with today’s release – but will be coming later this year to both the shared and reserved tiers). You pay for a shared mode web-site using the standard “pay as you go” model that we support with other features of Windows Azure (meaning no up-front costs, and you pay only for the hours that the feature is enabled).  A web-site running in shared mode costs only 1.3 cents/hr during the preview (so on average $9.36/month). Reserved Instance Mode In addition to running sites in shared mode, we also support scaling them to run within a reserved instance mode.  When running in reserved instance mode your sites are guaranteed to run isolated within your own Small, Medium or Large VM (meaning no other customers run within it).  You can run any number of web-sites within a VM, and there are no quotas on CPU or memory limits. You can run your sites using either a single reserved instance VM, or scale up to have multiple instances of them (e.g. 2 medium sized VMs, etc).  Scaling up or down is easy – just select the “reserved” instance VM within the “scale” tab of the Windows Azure Portal, choose the VM size you want, the number of instances of it you want to run, and then click save.  Changes take effect in seconds: Unlike shared mode, there is no per-site cost when running in reserved mode.  Instead you pay only for the reserved instance VMs you use – and you can run any number of web-sites you want within them at no extra cost (e.g. you could run a single site within a reserved instance VM or 100 web-sites within it for the same cost).  Reserved instance VMs start at 8 cents/hr for a small reserved VM.  Elastic Scale-up/down Windows Azure Web Sites allows you to scale-up or down your capacity within seconds.  This allows you to deploy a site using the shared mode option to begin with, and then dynamically scale up to the reserved mode option only when you need to – without you having to change any code or redeploy your application. If your site traffic starts to drop off, you can scale back down the number of reserved instances you are using, or scale down to the shared mode tier – all within seconds and without having to change code, redeploy, or adjust DNS mappings.  You can also use the “Dashboard” view within the Windows Azure Portal to easily monitor your site’s load in real-time (it shows not only requests/sec and bandwidth but also stats like CPU and memory usage). Because of Windows Azure’s “pay as you go” pricing model, you only pay for the compute capacity you use in a given hour.  So if your site is running most of the month in shared mode (at 1.3 cents/hr), but there is a weekend when it gets really popular and you decide to scale it up into reserved mode to have it run in your own dedicated VM (at 8 cents/hr), you only have to pay the additional pennies/hr for the hours it is running in the reserved mode.  There is no upfront cost you need to pay to enable this, and once you scale back down to shared mode you return to the 1.3 cents/hr rate.  This makes it super flexible and cost effective. Improved Custom Domain Support Web sites running in either “shared” or “reserved” mode support the ability to associate custom host names to them (e.g. www.mysitename.com).  You can associate multiple custom domains to each Windows Azure Web Site.  With today’s release we are introducing support for A-Records (a big ask by many users). With the A-Record support, you can now associate ‘naked’ domains to your Windows Azure Web Sites – meaning instead of having to use www.mysitename.com you can instead just have mysitename.com (with no sub-name prefix).  Because you can map multiple domains to a single site, you can optionally enable both a www and naked domain for a site (and then use a URL rewrite rule/redirect to avoid SEO problems). We’ve also enhanced the UI for managing custom domains within the Windows Azure Portal as part of today’s release.  Clicking the “Manage Domains” button in the tray at the bottom of the portal now brings up custom UI that makes it easy to manage/configure them: As part of this update we’ve also made it significantly smoother/easier to validate ownership of custom domains, and made it easier to switch existing sites/domains to Windows Azure Web Sites with no downtime. Continuous Deployment Support with Git and CodePlex or GitHub One of the more popular features we released earlier this summer was support for publishing web sites directly to Windows Azure using source control systems like TFS and Git.  This provides a really powerful way to manage your application deployments using source control.  It is really easy to enable this from a website’s dashboard page: The TFS option we shipped earlier this summer provides a very rich continuous deployment solution that enables you to automate builds and run unit tests every time you check in your web-site, and then if they are successful automatically publish to Azure. With today’s release we are expanding our Git support to also enable continuous deployment scenarios and integrate with projects hosted on CodePlex and GitHub.  This support is enabled with all web-sites (including those using the “free” scaling mode). Starting today, when you choose the “Set up Git publishing” link on a website’s “Dashboard” page you’ll see two additional options show up when Git based publishing is enabled for the web-site: You can click on either the “Deploy from my CodePlex project” link or “Deploy from my GitHub project” link to walkthrough a simple workflow to configure a connection between your website and a source repository you host on CodePlex or GitHub.  Once this connection is established, CodePlex or GitHub will automatically notify Windows Azure every time a checkin occurs.  This will then cause Windows Azure to pull the source and compile/deploy the new version of your app automatically.  The below two videos walkthrough how easy this is to enable this workflow and deploy both an initial app and then make a change to it: Enabling Continuous Deployment with Windows Azure Websites and CodePlex (2 minutes) Enabling Continuous Deployment with Windows Azure Websites and GitHub (2 minutes) This approach enables a really clean continuous deployment workflow, and makes it much easier to support a team development environment using Git: Note: today’s release supports establishing connections with public GitHub/CodePlex repositories.  Support for private repositories will be enabled in a few weeks. Support for multiple branches Previously, we only supported deploying from the git ‘master’ branch.  Often, though, developers want to deploy from alternate branches (e.g. a staging or future branch). This is now a supported scenario – both with standalone git based projects, as well as ones linked to CodePlex or GitHub.  This enables a variety of useful scenarios.  For example, you can now have two web-sites - a “live” and “staging” version – both linked to the same repository on CodePlex or GitHub.  You can configure one of the web-sites to always pull whatever is in the master branch, and the other to pull what is in the staging branch.  This enables a really clean way to enable final testing of your site before it goes live. This 1 minute video demonstrates how to configure which branch to use with a web-site. Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. We’ll have even more new features and enhancements coming in the weeks ahead – including support for the recent Windows Server 2012 and .NET 4.5 releases (we will enable new web and worker role images with Windows Server 2012 and .NET 4.5 next month).  Keep an eye out on my blog for details as these new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >