Search Results

Search found 17257 results on 691 pages for 'mixed mode authentication'.

Page 89/691 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • ASP.NET 2.0 app runs on Win 2003 in IIS 5 isolation mode but not in (default) IIS 6 mode

    - by Tex
    The app uses DLLImport to call a legacy unmanaged dll. Let's call this dll Unmanaged.dll for the sake of this question. Unmanaged.dll has dependencies on 5 other legacy dll's. All of the legacy dll's are placed in the WebApp/bin/ directory of my ASP.NET application. When IIS is running in 5.0 isolation mode, the app works fine - calls to the legacy dll are processed without error. When IIS is running in the default 6.0 mode, the app is able to initiate the Unmanaged.dll (InitMe()), but dies during a later call to it (ProcessString()). I'm pulling my hair out here. I've moved the unmanaged dll's to various locations, tried all kinds of security settings and searched long and hard for a solution. Help! Sample code: [DllImport("Unmanaged.dll", EntryPoint="initME", CharSet=System.Runtime.InteropServices.CharSet.Ansi, CallingConvention=CallingConvention.Cdecl)] internal static extern int InitME(); //Calls to InitMe work fine - Unmanaged.dll initiates and writes some entries in a dedicated log file [DllImport("Unmanaged.dll", EntryPoint="processString", CharSet=System.Runtime.InteropServices.CharSet.Ansi, CallingConvention=CallingConvention.Cdecl)] internal static extern int ProcessString(string inStream, int inLen, StringBuilder outStream, ref int outLen, int maxLen); //Calls to ProcessString cause the app to crash, without leaving much of a trace that I can find so far

    Read the article

  • FreeRTOS Sleep Mode hazards while using MSP430f5438

    - by michael
    Hi, I wrote an an idle hook shown here void vApplicationIdleHook( void ) { asm("nop"); P1OUT &= ~0x01;//go to sleep lights off! LPM3;// LPM Mode - remove to make debug a little easier... asm("nop"); } That should cause the LED to turn off, and MSP430 to go to sleep when there is nothing to do. I turn the LED on during some tasks. I also made sure to modify the sleep mode bit in the SR upon exit of any interrupt that could possibly wake the MCU (with the exception of the scheduler tick isr in portext.s43. The macro in iar is __bic_SR_register_on_exit(LPM3_bits); // Exit Interrupt as active CPU However, it seems as though putting the MCU to sleep causes some irregular behavior. The led stays on always, although when i scope it, it will turn off for a couple instructions cycles when ever i wake the mcu via one of the interrupts (UART), and then turn back on. If I comment out the LPM3 instruction, things go as planned. The led stays off for most of the time and only comes on when a task is running. I am using a MSP4f305438 Any ideas?

    Read the article

  • Running Hadoop example in psuedo-distributed mode on vm

    - by manas
    I have set-up Hadoop on a OpenSuse 11.2 VM using Virtualbox.I have made the prerequisite configs. I ran this example in the Standalone mode successfully. But in psuedo-distributed mode I get the following error: $./bin/hadoop fs -put conf input 10/04/13 15:56:25 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:25 INFO hdfs.DFSClient: Abandoning block blk_-8490915989783733314_1003 10/04/13 15:56:31 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:31 INFO hdfs.DFSClient: Abandoning block blk_-1740343312313498323_1003 10/04/13 15:56:37 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:37 INFO hdfs.DFSClient: Abandoning block blk_-3566235190507929459_1003 10/04/13 15:56:43 INFO hdfs.DFSClient: Exception in createBlockOutputStream java.net.SocketException: Protocol not available 10/04/13 15:56:43 INFO hdfs.DFSClient: Abandoning block blk_-1746222418910980888_1003 10/04/13 15:56:49 WARN hdfs.DFSClient: DataStreamer Exception: java.io.IOException: Unable to create new block. at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.nextBlockOutputStream(DFSClient.java:2845) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.access$2000(DFSClient.java:2102) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream$DataStreamer.run(DFSClient.java:2288) 10/04/13 15:56:49 WARN hdfs.DFSClient: Error Recovery for block blk_-1746222418910980888_1003 bad datanode[0] nodes == null 10/04/13 15:56:49 WARN hdfs.DFSClient: Could not get block locations. Source file "/user/max/input/core-site.xml" - Aborting... put: Protocol not available 10/04/13 15:56:49 ERROR hdfs.DFSClient: Exception closing file /user/max/input/core-site.xml : java.net.SocketException: Protocol not available java.net.SocketException: Protocol not available at sun.nio.ch.Net.getIntOption0(Native Method) at sun.nio.ch.Net.getIntOption(Net.java:178) at sun.nio.ch.SocketChannelImpl$1.getInt(SocketChannelImpl.java:419) at sun.nio.ch.SocketOptsImpl.getInt(SocketOptsImpl.java:60) at sun.nio.ch.SocketOptsImpl.sendBufferSize(SocketOptsImpl.java:156) at sun.nio.ch.SocketOptsImpl$IP$TCP.sendBufferSize(SocketOptsImpl.java:286) at sun.nio.ch.OptionAdaptor.getSendBufferSize(OptionAdaptor.java:129) at sun.nio.ch.SocketAdaptor.getSendBufferSize(SocketAdaptor.java:328) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.createBlockOutputStream(DFSClient.java:2873) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.nextBlockOutputStream(DFSClient.java:2826) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream.access$2000(DFSClient.java:2102) at org.apache.hadoop.hdfs.DFSClient$DFSOutputStream$DataStreamer.run(DFSClient.java:2288) Any leads will be highly appreciated.

    Read the article

  • Error building Visual Studio 2010 Silverlight 4 projects on Windows 7 with XP Mode

    - by Kevin Dente
    I installed Visual Studio 2010 Beta 2 in an XP Mode VM on Windows 7. Then I created a trivial Silverlight 4 (beta) project and tried to build it. I get the following error: Error 1 The "ValidateXaml" task failed unexpectedly. System.IO.FileLoadException: Could not load file or assembly 'file://\tsclient\d\Users\me\Documents\Visual Studio 2010\Projects\SilverlightApplication2\SilverlightApplication2\obj\Debug\SilverlightApplication2.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) File name: 'file://\tsclient\d\Users\me\Documents\Visual Studio 2010\Projects\SilverlightApplication2\SilverlightApplication2\obj\Debug\SilverlightApplication2.dll' --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.XamlValidator.Execute(ITask task) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.XamlValidator.Execute(ITask task) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.Execute() at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) I believe this is related to the fact that XP Mode redirects the My Documents folder to the host, turning it into a network share location, and some sort of CAS / security policy is being triggered. Anyone know how to fix it?

    Read the article

  • How to do recurring with bank account payment mode using authorized.net

    - by Salil
    Hi All, I am using recurring facility of authorized.net using active_merchant plugin in rails. there are two payment method for this 1] Credit Card 2] Bank Account I successfully done it using Credit Card For Recurring i need my Test Mode off. Also my E-check, credit card processing, and subscriptions are all enabled. But i am not able to subscribed using Bank Account Following is my code ActiveMerchant::Billing::Base.mode = :developer #i found follwing test bank account on net account = ActiveMerchant::Billing::Check.new(:account_holder_type=>"personal",:account_number=>"123123123", :account_type => "savings", :name=>"name", :routing_number=>"244183602") if account.valid? #this comes true gateway = ActiveMerchant::Billing::AuthorizeNetGateway.new(:login => 'Mylogin', :password => 'Mypassword') response = gateway.recurring( amount, nil, {:interval =>{:length=>@length, :unit =>:months}, :duration =>{:start_date=>'2010-04-24', :occurrences=>1}, :billing_address=>{:first_name=>'dinesh', :last_name=>'singh'}, :bank_account=>{:account_holder_type=>"personal",:account_number=>"123123123", :account_type => "savings", :name_of_account=>"name", :routing_number=>"244183602"} }) if response.success? #this comes false else puts response.message ####>> ERROR render :action=>"account_payment" end I get Follwing ERROR when i debug for response.message "The test transaction was not successful. (128) This transaction cannot be processed." Am i doing anything wrong i search for the another Test Bank Account Data but i didn't find it. Please help I badly need it. Thanks in Advance. Regards, Salil Gaikwad

    Read the article

  • Timer a usage in msp430 in high compiler optimization mode

    - by Vishal
    Hi, I have used timer A in MSP430 with high compiler optimization, but found that my timer code is failing when high compiler optimization used. When none optimization is used code works fine. This code is used to achieve 1 ms timer tick. timeOutCNT is increamented in interrupt. Following is the code, //Disable interrupt and clear CCR0 TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0; // timer interrupt flag disabled CCTL0 = CCIE; // CCR0 interrupt enabled CCR0 = 500; TIMER_A_TACTL &= TIMER_A_TAIE; //enable timer interrupt TIMER_A_TACTL &= TIMER_A_TAIFG; //enable timer interrupt TACTL = TIMER_A_TASSEL + MC_1 + ID_3; // SMCLK, upmode timeOutCNT = 0; //timeOutCNT is increased in timer interrupt while(timeOutCNT <= 1); //delay of 1 milisecond TIMER_A_TACTL = TIMER_A_TASSEL | // set the clock source as SMCLK TIMER_A_ID | // set the divider to 8 TACLR | // clear the timer MC_1; // continuous mode TIMER_A_TACTL &= ~TIMER_A_TAIE; // timer interrupt disabled TIMER_A_TACTL &= 0x00; // timer interrupt flag disabled Can anybody help me here to resolve this issue? Is there any other way we can use timer A so it works fine in optimization modes? Or do I have used is wrongly to achieve 1 ms interrupt? Thanks in advanced. Vishal N

    Read the article

  • Datagridview Winforms Add or Delete Rows in Edit Mode with Collection Binding

    - by user630548
    In my datagridview, I bind a List of objects named 'ProductLine'. But unfortunately with this approach I cannot 'Add' or 'Delete' rows to the datagridview in edit mode. When I create a fresh new order I can Add or Delete rows but once I save it and try to open it in Edit then it doesn't let me 'Add' or 'Delete' (via keyboard). Any idea? Here is the code for this: If it is a fresh Order then I do something like this: private void Save(){ for (int i = 0; i <= dtgProdSer.RowCount - 1; i++) { if ((itemList != null) && (itemList.Count > i)) productLine = itemList[i]; else productLine = new ProductLine(); productLine.Amount = Convert.ToDouble(dataGridViewTextBoxCell.Value); } } And if it is an Edit then in the Form_Load I check ProductId is NON Zero then I do the following: private void fillScreen{ dtgProdSer.DataSource = itemList; } But with this I cannot Add or Delete Rows in Edit mode. Any advise is greatly appreciated.

    Read the article

  • IIS7 integrated mode MVC deploy 404 not found on some actions

    - by majkinetor
    Hello. Once deployed parts of my web-application stop working. Index-es on each controller do work, and one form posting via Ajax, other then that yields 404. I understand that nothing particular should be done in integrated mode. One interesting thing is that 1 AJAX action is working. I don't know how to proceed with troubleshooting. Some info: App is using default app pool set to integrated mode. WebApp is done in net framework 3.5. I use default routing model. Along web.config in root there is web.config in /View folder referencing HttpNotFoundHandler. OS is Windows Server 2008. Admins issued aspnet_regiis.exe -i IIS 7 Any help is appreciated. Thx. EDIT: Noticed one very strange thing. One ajax call works, other ajax call doesn't works as I login, but when I move to ther page and return to that one it starts working ?! Small video of the problem is available here

    Read the article

  • Getting error when compiling debug mode: C++/CLI - error LNK2022

    - by Yochai Timmer
    I've got a CLI code wrapping a C++ DLL. When i try to compile it in debug mode, i get the following error: Error 22 error LNK2022: metadata operation failed (8013118D) : Inconsistent layout information induplicated types .... MSVCMRTD.lib (locale0_implib.obj) The weird thing is that on Release mode it compiles OK and works OK. The only difference i can see that causes the problem is when i change: Configuration Properties - C/C++ - Code Generation - Runtime Library When it's set to: Multi-threaded Debug DLL (/MDd) it throws the error. When it's set to: Multi-threaded DLL (/MD) it compiles fine. The same settings work for all the other DLLs in the project (CLI and C++) and they inherit the same properties. I'm using VS2010. So, how can i solve this ? And can I get some explanation to WHY this is happening ? Update: I've basically tried changing every option in the project's properties with no luck. I've read somewhere that this might be caused from duplicate declarations of a type of the same name. But in the CLI file i'm calling std::string etc. explicitly from std. Any other ideas ?

    Read the article

  • How to resolve the only ImagePicker control view in landscap mode and whole application in portrait mode?

    - by Wolvorin
    I have tried almost all the answers during last two days provided by Google and SO but no luck :( What I want is my whole application is in portrait mode only. And it working fine in ios 6+. The only support required at now. But the problem is I need to launch UIImagePickerViewController with image source type camera in only landscap mode. What I tried till now is : (1) I try to create one category for UIImagePickerController for orientation. -(BOOL)shouldAutorotate { return NO; } -(NSUInteger)supportedInterfaceOrientations { return UIInterfaceOrientationMaskLandscape; } - (UIInterfaceOrientation)preferredInterfaceOrientationForPresentation { return UIInterfaceOrientationLandscapeLeft; } Like this. But the camera view is not proper aligned. It just follows the orientation of device with some +/- 90 angle but not what I required. Even the button of the camera shown by camera view as camera control is also follows the camera view, ie. the view is rotated to 90 anti clock vise and stays to that way. Is there any way to use the camera with proper alignment? or have to use other framework to work with it? Please help me. I stuck with it for last two days.

    Read the article

  • OnConnect event not firing when using TClientSocket inside a TThread on non-blocking mode

    - by mathematician1975
    I am trying to make use of Borlands TClientSocket component in non-blocking mode inside a multithreaded C++ Windows application. I am creating multiple threads (classes derived from TThread), each of which creates its own TClientSocket object. I then assign member functions of the thread class to act as event handlers for the OnConnect, OnDisconnect and OnSocketError events of the socket. The problem I am having here is that whenever I call the TClientSocket::Open() function from within the TThread::Execute() function, the OnConnect event never fires. However, When I call the Open() function from the VCL thread prior to the TThread::Execute() function getting called, all of the events fire and I can use the thread-socket combination as I would like. Now I have not read anything in documentation that says that TClientSocket should not be used in non-blocking mode when used inside a thread, but it appears to me that there is perhaps something wrong conceptually in the way I am trying to use this class. Borland documentation is quite poor on the subject and these components have now been deprecated so reliable information is hard to come by. Despite being deprecated I have to use them as there is no alternative in the Builder 6 package I have. Can anyone please advise me if there is a right/wrong way to use TThread and a non-blocking TClientSocket in combination. I have never had problems using it as part of the VCL thread and never had problems using TServerSocket before and I really cannot understand why some events are not firing.

    Read the article

  • Open an Emacs buffer when a command tries to open an editor in shell-mode

    - by Chris Conway
    I like to use Emacs' shell mode, but it has a few deficiencies. One of those is that it's not smart enough to open a new buffer when a shell command tries to invoke an editor. For example with the environment variable VISUAL set to vim I get the following from svn propedit: $ svn propedit svn:externals . "svn-prop.tmp" 2L, 149C[1;1H ~ [4;1H~ [5;1H~ [6;1H~ [7;1H~ ... (It may be hard to tell from the representation, but it's a horrible, ugly mess.) With VISUAL set to "emacs -nw", I get $ svn propedit svn:externals . emacs: Terminal type "dumb" is not powerful enough to run Emacs. It lacks the ability to position the cursor. If that is not the actual type of terminal you have, use the Bourne shell command `TERM=... export TERM' (C-shell: `setenv TERM ...') to specify the correct type. It may be necessary to do `unset TERMINFO' (C-shell: `unsetenv TERMINFO') as well.svn: system('emacs -nw svn-prop.tmp') returned 256 (It works with VISUAL set to just emacs, but only from inside an Emacs X window, not inside a terminal session.) Is there a way to get shell mode to do the right thing here and open up a new buffer on behalf of the command line process?

    Read the article

  • Mediawiki authenication replacement showing "Login Required" instead of signing user into wiki

    - by arcdegree
    I'm fairly to MediaWiki and needed a way to automatically log users in after they authenticated to a central server (which creates a session and cookie for applications to use). I wrote a custom authentication extension based off of the LDAP Authentication extension and a few others. The extension simply needs to read some session data to create or update a user and then log them in automatically. All the authentication is handled externally. A user would not be able to even access the wiki website without logging in externally. This extension was placed into production which replaced the old standard MediaWiki authentication system. I also merged user accounts to prepare for the change. By default, a user must be logged in to view, edit, or otherwise do anything in the wiki. My problem is that I found if a user had previously used the built-in MediaWiki authentication system and returned to the wiki, my extension would attempt to auto-login the user, however, they would see a "Login Required" page instead of the page they requested like they were an anonymous user. If the user then refreshed the page, they would be able to navigate, edit, etc. From what I can tell, this issue resolves itself after the UserID cookie is reset or created fresh (but has been known to strangely come up sometimes). To replicate, if there is an older User ID in the "USERID" cookie, the user is shown the "Login Required" page which is a poor user experience. Another way of showing this page is by removing the user account from the database and refreshing the wiki page. As a result, the user will again see the "Login Required" page. Does anyone know how I can use debugging to find out why MediaWiki thinks the user is not signed in when the cookies are set properly and all it takes is a page refresh? Here is my extension (simplified a little for this post): <?php $wgExtensionCredits['parserhook'][] = array ( 'name' => 'MyExtension', 'author' => '', ); if (!class_exists('AuthPlugin')) { require_once ( 'AuthPlugin.php' ); } class MyExtensionPlugin extends AuthPlugin { function userExists($username) { return true; } function authenticate($username, $password) { $id = $_SESSION['id']; if($username = $id) { return true; } else { return false; } } function updateUser(& $user) { $name = $user->getName(); $user->load(); $user->mPassword = ''; $user->mNewpassword = ''; $user->mNewpassTime = null; $user->setRealName($_SESSION['name']); $user->setEmail($_SESSION['email']); $user->mEmailAuthenticated = wfTimestampNow(); $user->saveSettings(); return true; } function modifyUITemplate(& $template) { $template->set('useemail', false); $template->set('remember', false); $template->set('create', false); $template->set('domain', false); $template->set('usedomain', false); } function autoCreate() { return true; } function disallowPrefsEditByUser() { return array ( 'wpRealName' => true, 'wpUserEmail' => true, 'wpNick' => true ); } function allowPasswordChange() { return false; } function setPassword( $user, $password ) { return false; } function strict() { return true; } function initUser( & $user ) { } function updateExternalDB( $user ) { return false; } function canCreateAccounts() { return false; } function addUser( $user, $password ) { return false; } function getCanonicalName( $username ) { return $username; } } function SetupAuthMyExtension() { global $wgHooks; global $wgAuth; $wgHooks['UserLoadFromSession'][] = 'Auth_MyExtension_autologin_hook'; $wgHooks['UserLogoutComplete'][] = 'Auth_MyExtension_UserLogoutComplete'; $wgHooks['PersonalUrls'][] = 'Auth_MyExtension_personalURL_hook'; $wgAuth = new MyExtensionPlugin(); } function Auth_MyExtension_autologin_hook($user, &$return_user ) { global $wgUser; global $wgAuth; global $wgContLang; wfSetupSession(); // Give us a user, see if we're around $tmpuser = new User() ; $rc = $tmpuser->newFromSession(); $rc = $tmpuser->load(); if( $rc && $rc->isLoggedIn() ) { if ( $rc->authenticate($rc->getName(), '') ) { return true; } else { $rc->logout(); } } $id = trim($_SESSION['id']); $name = ucfirst(trim($_SESSION['name'])); if (empty($dsid)) { $result = false; // Deny access return true; } $user = User::newFromName($dsid); if (0 == $user->getID() ) { // we have a new user to add... $user->setName( $id); $user->addToDatabase(); $user->setToken(); $user->saveSettings(); $ssUpdate = new SiteStatsUpdate( 0, 0, 0, 0, 1 ); $ssUpdate->doUpdate(); } else { $user->saveToCache(); } // update email, real name, etc. $wgAuth->updateUser( $user ); $result = true; // Go ahead and log 'em in $user->setToken(); $user->saveSettings(); $user->setupSession(); $user->setCookies(); return true; } function Auth_MyExtension_personalURL_hook(& $personal_urls, & $title) { global $wgUser; unset( $personal_urls['mytalk'] ); unset($personal_urls['Userlogin']); $personal_urls['userpage']['text'] = $wgUser->getRealName(); foreach (array('login', 'anonlogin') as $k) { if (array_key_exists($k, $personal_urls)) { unset($personal_urls[$k]); } } return true; } function Auth_MyExtension_UserLogoutComplete(&$user, &$inject_html, $old_name) { setcookie( $GLOBALS['wgCookiePrefix'] . '_session', '', time() - 3600, $GLOBALS['wgCookiePath']); setcookie( $GLOBALS['wgCookiePrefix'] . 'UserName', '', time() - 3600, $GLOBALS['wgCookiePath']); setcookie( $GLOBALS['wgCookiePrefix'] . 'UserID', '', time() - 3600, $GLOBALS['wgCookiePath']); setcookie( $GLOBALS['wgCookiePrefix'] . 'Token', '', time() - 3600, $GLOBALS['wgCookiePath']); return true; } ?> Here is part of my LocalSettings.php file: ############################# # Disallow Anonymous Access ############################# $wgGroupPermissions['*']['read'] = false; $wgGroupPermissions['*']['edit'] = false; $wgGroupPermissions['*']['createpage'] = false; $wgGroupPermissions['*']['createtalk'] = false; $wgGroupPermissions['*']['createaccount'] = false; $wgShowIPinHeader = false; # For non-logged in users ############################# # Extension: MyExtension ############################# require_once("$IP/extensions/MyExtension.php"); $wgAutoLogin = true; SetupAuthMyExtension(); $wgDisableCookieCheck = true;

    Read the article

  • python interactive mode module import issue

    - by Jeff
    I believe I have what would be called a scope issue, perhaps name space. Not too sure I'm new to python. I'm trying to make a module that will search through a list using regular expressions. I'm sure there is a better way of doing it but this error that I'm getting is bugging me and I want to understand why. here's my code: class relist(list): def __init__(self, l): list.__init__(self, l) def __getitem__(self, rexp): r = re.compile(rexp) res = filter(r.match, self) return res if __name__ == '__main__': import re listl = [x+y for x in 'test string' for y in 'another string for testing'] print(listl) test = relist(listl) print('----------------------------------') print(test['[s.]']) When I run this code through the command line it works the way I expect it to; however when I run it through python interactive mode I get the error >>> test['[s.]'] Traceback (most recent call last): File "<stdin>", line 1, in <module> File "relist.py", line 8, in __getitem__ r = re.compile(rexp) NameError: global name 're' is not defined While in the interactive mode I do import re and I am able to use the re functions, but for some reason when I'm trying to execute the module it doesn't work. Do I need to import re into the scope of the class? I wouldn't think so because doesn't python search through other scopes if it's not found in the current one? I appreciate your help, and if there is a better way of doing this search I would be interested in knowing. Thanks

    Read the article

  • Should a c# dev switch to VB.net when the team language base is mixed?

    - by jjr2527
    I recently joined a new development team where the language preferences are mixed on the .net platform. Dev 1: Knows VB.net, does not know c# Dev 2: Knows VB.net, does not know c# Dev 3: Knows c# and VB.net, prefers c# Dev 4: Knows c# and VB6(VB.net should be pretty easy to pick up), prefers c# It seems to me that the thought leaders in the .net space are c# devs almost universally. I also thought that some 3rd party tools didn't support VB.net but when I started looking into it I didn't find any good examples. I would prefer to get the whole team on c# but if there isn't any good reason to force the issue aside from preference then I don't think that is the right choice. Are there any reasons I should lead folks away from VB.net?

    Read the article

  • Should a c# dev switch to VB.net when the team language base is mixed?

    - by jjr2527
    I recently joined a new development team where the language preferences are mixed on the .net platform. Dev 1: Knows VB.net, does not know c# Dev 2: Knows VB.net, does not know c# Dev 3: Knows c# and VB.net, prefers c# Dev 4: Knows c# and VB6(VB.net should be pretty easy to pick up), prefers c# It seems to me that the thought leaders in the .net space are c# devs almost universally. I also thought that some 3rd party tools didn't support VB.net but when I started looking into it I didn't find any good examples. I would prefer to get the whole team on c# but if there isn't any good reason to force the issue aside from preference then I don't think that is the right choice. Are there any reasons I should lead folks away from VB.net?

    Read the article

  • WCF AuthenticationService in IIS7 Error

    - by germandb
    I have a WCF Server running on IIS 7 using default application pool, with SSL activate, the services is installed in a SBS Server 2008. I implement client application services with wcf and SQL 2005 for setting the access control in my application. The application run under windows vista and is make with WPF. In my developer machine the application and the WCF services run well, the IIS i'm use for the trials is the local IIS 7 and the database is the SQL Server 2005 database hosting in my server. I'm using Visual Studio Project Designer to enable and configure client application services. using https://localhost/WcfServidorFundacion. When i'm change the authentication services location to https://WcfServices:5659/WcfServidorFundacion and recompile the application, the following error show up. Message: The web service returned the error status code: InternalServerError. Details of service failure: {"Message":" Error while processing your request ","StackTrace":"","ExceptionType":""} Stack Trace: en System.Net.HttpWebRequest.GetResponse() en System.Web.ClientServices.Providers.ProxyHelper.CreateWebRequestAndGetResponse(String serverUri, CookieContainer& cookies, String username, String connectionString, String connectionStringProvider, String[] paramNames, Object[] paramValues, Type returnType) InnerException: System.Net.WebException Message="Remote Server Error: (500) Interal Server Error." I can access the WCF service from the navigator using the url mentioned above and even make a webReference in my project. I make a capture of the response but I'cant post it because i don't have 10 reputation points I activate the error log in the IIS 7 server, and the result is a Warning in the ManagedPipilineHandler. I appreciate if any one can help me Errors & Warnings No.? Severity Event Module Name 132. view trace Warning -MODULE_SET_RESPONSE_ERROR_STATUS ModuleName ManagedPipelineHandler Notification 128 HttpStatus 500 HttpReason Internal Server Error HttpSubStatus 0 ErrorCode 0 ConfigExceptionInfo Notification EXECUTE_REQUEST_HANDLER ErrorCode La operación se ha completado correctamente. (0x0) Maybe this can help, is the web.config of my service <?xml version="1.0" encoding="utf-8"?> <!-- Nota: como alternativa para editar manualmente este archivo, puede utilizar la herramienta Administración de sitios web para configurar los valores de la aplicación. Utilice la opción Sitio Web->Configuración de Asp.Net en Visual Studio. Encontrará una lista completa de valores de configuración y comentarios en machine.config.comments, que se encuentra generalmente en \Windows\Microsoft.Net\Framework\v2.x\Config --> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings /> <connectionStrings> <remove name="LocalMySqlServer" /> <remove name="LocalSqlServer" /> <add name="fundacionSelfAut" connectionString="Data Source=FUNDACIONSERVER/PRUEBAS;Initial Catalog=fundacion;User ID=wcfBaseDatos;Password=qwerty_2009;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <profile enabled="true" defaultProvider="SqlProfileProvider"> <providers> <clear /> <add name="SqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> <properties> <add name="FirstName" type="String" /> <add name="LastName" type="String" /> <add name="PhoneNumber" type="String" /> </properties> </profile> <roleManager enabled="true" defaultProvider="SqlRoleProvider"> <providers> <clear /> <add name="SqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" /> </providers> </roleManager> <membership defaultProvider="SqlMembershipProvider"> <providers> <clear /> <add name="SqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="fundacionSelfAut" applicationName="fundafe" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="true" requiresUniqueEmail="true" passwordFormat="Hashed" /> </providers> </membership> <authentication mode="Forms" /> <compilation debug="true" strict="false" explicit="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </assemblies> </compilation> <!-- La sección <authentication> permite la configuración del modo de autenticación de seguridad utilizado por ASP.NET para identificar a un usuario entrante. --> <!-- La sección <customErrors> permite configurar las acciones que se deben llevar a cabo/cuando un error no controlado tiene lugar durante la ejecución de una solicitud. Específicamente, permite a los desarrolladores configurar páginas de error html que se mostrarán en lugar de un seguimiento de pila de errores. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> <sessionState timeout="40" /> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom> <!-- La sección webServer del sistema es necesaria para ejecutar ASP.NET AJAX en Internet Information Services 7.0. Sin embargo, no es necesaria para la versión anterior de IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> <tracing> <traceFailedRequests> <add path="*"> <traceAreas> <add provider="ASP" verbosity="Verbose" /> <add provider="ASPNET" areas="Infrastructure,Module,Page,AppServices" verbosity="Verbose" /> <add provider="ISAPI Extension" verbosity="Verbose" /> <add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module" verbosity="Verbose" /> </traceAreas> <failureDefinitions statusCodes="401.3,500,403,404,405" /> </add> </traceFailedRequests> </tracing> <security> <authorization> <add accessType="Allow" users="germanbarbosa,informatica" /> </authorization> <authentication> <windowsAuthentication enabled="false" /> </authentication> </security> </system.webServer> <system.web.extensions> <scripting> <webServices> <authenticationService enabled="true" requireSSL="true" /> <profileService enabled="true" readAccessProperties="FirstName,LastName,PhoneNumber" /> <roleService enabled="true" /> </webServices> </scripting> </system.web.extensions> <system.serviceModel> <services> <!-- this enables the WCF AuthenticationService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.AuthenticationService"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.AuthenticationService" /> </service> <!-- this enables the WCF RoleService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.RoleService"> <endpoint binding="basicHttpBinding" bindingConfiguration="userHttps" bindingNamespace="http://asp.net/ApplicationServices/v200" contract="System.Web.ApplicationServices.RoleService" /> </service> <!-- this enables the WCF ProfileService endpoint --> <service behaviorConfiguration="AppServiceBehaviors" name="System.Web.ApplicationServices.ProfileService"> <endpoint binding="basicHttpBinding" bindingNamespace="http://asp.net/ApplicationServices/v200" bindingConfiguration="userHttps" contract="System.Web.ApplicationServices.ProfileService" /> </service> </services> <bindings> <basicHttpBinding> <!-- Set up a binding that uses Username as the client credential type --> <binding name="userHttps"> <security mode="Transport"> </security> </binding> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="AppServiceBehaviors"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseAspNetRoles" roleProviderName="SqlRoleProvider" /> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="MembershipProvider" membershipProviderName="SqlMembershipProvider" /> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel> </configuration>

    Read the article

  • Invoking a WCF service using claims based authentication

    - by ashwnacharya
    I have a WCF service deployed in a server machine. We are using claims based authentication to authenticate the WCF service caller. The WCF service is restricted by using IIS Authorization rules. How do I programmatically invoke the WCF service using .NET? The client app uses a proxy generated using SVCUtil. calling the service reads the credentials from a configuration file (not the app.config file, in fact the client application does not have a *.config file).

    Read the article

  • WCF - Windows authentication - Security settings require Anonymous...

    - by Rashack
    Hi, I am struggling hard with getting WCF service running on IIS on our server. After deployment I end up with an error message: Security settings for this service require 'Anonymous' Authentication but it is not enabled for the IIS application that hosts this service. I want to use Windows authentication and thus I have Anonymous access disabled. Also note that there is aspNetCompatibilityEnabled (if that makes any difference). Here's my web.config: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <bindings> <webHttpBinding> <binding name="default"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Windows" proxyCredentialType="Windows"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="AspNetAjaxBehavior"> <enableWebScript /> <webHttp /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="defaultServiceBehavior"> <serviceMetadata httpGetEnabled="true" httpsGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseWindowsGroups" /> </behavior> </serviceBehaviors> </behaviors> <services> <service name="xxx.Web.Services.RequestService" behaviorConfiguration="defaultServiceBehavior"> <endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" contract="xxx.Web.Services.IRequestService" bindingConfiguration="default"> </endpoint> <endpoint address="mex" binding="mexHttpBinding" name="mex" contract="IMetadataExchange"></endpoint> </service> </services> </system.serviceModel> I have searched all over the internet with no luck. Any clues are greatly appreciated.

    Read the article

  • Active Directory and NTLM Authentication

    - by Alkersan
    Im writing an IIS Application, which manages AD users. For this purpose Ive configured site to use Negitiate AuthenticationProvider, and everything works. I wonder, is NTLM suitable for operations with Active Directory (such as creating user accounts)? Or AD accepts only Kerberos authentication?

    Read the article

  • Django SMTP and secure password authentication

    - by Lehych
    I have an SMTP server that e`uires secure password authentication (e.g. Outlook requires to check SPA). Is there a way to deal with it with Django SMTPConnection? Or maby any ideas about any python solution to deal SPA? Honestly, I couldn't find enough about SPA, to understand what is it exactly: * en.wikipedia:Secure_Password_Authentication * http://www.kuro5hin.org/?op=displaystory;sid=2002/4/28/1436/66154

    Read the article

  • Websphere MQ Authentication and Key Certificates

    - by user171523
    I would like to authenticate the user against the MQ Series before user places the Queue message in Queue manager. I am using the IBM MQ Series V7. I would like to know how does the authentication and Key certificate works in terms of validation. It will be great if i can get any helpful links on the same.

    Read the article

  • How To Call a .Net Web Service with Kerberos (or NTML) authentication from Oracle PL/SQL

    - by Niklas
    Hi all, We are calling a .Net webservice from our oracle database using the sys.utl_http package and we have also tested with the sys.utl_dbws package, this works fine when there is no security on the .Net webservice. However, we would like to use sys.utl_http or sys.utl_dbws to call a .Net webservice with Kerberos- or NTLM authentication (we're currently struggling with this). Any hints on how to solve this, is it possible? Thanks//Niklas

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >