Search Results

Search found 98173 results on 3927 pages for 'maintaining old code'.

Page 890/3927 | < Previous Page | 886 887 888 889 890 891 892 893 894 895 896 897  | Next Page >

  • The cost of Programmer Team Clustering

    - by MarkPearl
    I recently was involved in a conversation about the productivity of programmers and the seemingly wide range in abilities that different programmers have in this industry. Some of the comments made were reiterated a few days later when I came across a chapter in Code Complete (v2) where it says "In programming specifically, many studies have shown order-of-magnitude differences in the quality of the programs written, the sizes of the programs written, and the productivity of programmers". In line with this is another comment presented by Code Complete when discussing teams - "Good programmers tend to cluster, as do bad programmers". This is something I can personally relate to. I have come across some really good and bad programmers and 99% of the time it turns out the team they work in is the same - really good or really bad. When I have found a mismatch, it hasn't stayed that way for long - the person has moved on, or the team has ejected the individual. Keeping this in mind I would like to comment on the risks an organization faces when forcing teams to remain together regardless of the mix. When you have the situation where someone is not willing to be part of the team but still wants to get a pay check at the end of each month, it presents some interesting challenges and hard decisions to make. First of all, when this occurs you need to give them an opportunity to change - for someone to change, they need to know what the problem is and what is expected. It is unreasonable to expect someone to change but have not indicated what they need to change and the consequences of not changing. If after a reasonable time of an individual being aware of the problem and not making an effort to improve you need to do two things... Follow through with the consequences of not changing. Consider the impact that this behaviour will have on the rest of the team. What is the cost of not following through with the consequences? If there is no follow through, it is often an indication to the individual that they can continue their behaviour. Why should they change if you don't care enough to keep your end of the agreement? In many ways I think it is very similar to the "Broken Windows" principles – if you allow the windows to break and don’t fix them, more will get broken. What is the cost of keeping them on? When keeping a disruptive influence in a team you risk loosing the good in the team. As Code Complete says, good and bad programmers tend to cluster - they have a tendency to keep this balance - if you are not going to help keep the balance they will. The cost of not removing a disruptive influence is that the good in the team will eventually help you maintain the clustering themselves by leaving.

    Read the article

  • How can I remove a Unity window entry?

    - by Pol Delgado Martin
    I installed Eclipse long time ago from the Software Center, but recently I needed a newer version than the repo one. Then I removed it via Software Center and installed Eclipse Kepler in /opt. However, the window opened is not called Eclipse, it is the name of an old program I made (Eclipse- GMM). However, that's not the main issue, but that even if I created a .desktop file it launches the same, having "two" eclipses in the dock, the actual program and the launcher. How can I remove Unity .desktop cache or wathever it is this?

    Read the article

  • Where can I get resources to design a website like this? [closed]

    - by Jhon Andrew
    I have a project. To make a CMS for an online game. Can anyone suggest me where I can get resources that I can use like vintage borders, seamless old papers or any vintage like patterns, etc. I would like to come up with something like this website for example: http://www.gamezaion.com/ I hope someone would suggest and/or give me ideas, inspirations, and examples how I can come up to something like it. P.S.: I am getting a hard time designing, because I define my self as a developer not a designer.. Lol.

    Read the article

  • HP Pavilion dv6 can't shutdown or reboot

    - by Hamza
    Ubuntu 11.04 with HP Pavilion can't shutdown or reboot. I am old linux user, been using linux for years, this is the first time in encounter this issue ever with many Linux distros on the same machine. I tried many distro but mainly Ubuntu ( 10.04 , 10.10 , 10.04 ) , the system can't reboot or shutdown with. Other than that everything works fine. Same issue happened with Linux Mint .... Well I have seen many questions with the same problem and no real answers yet, or accurate replies from Ubuntu or even HP. My Machine is : HP Pavilion dv6 , Core i7 Processor , 4 GB Rams , ATI Radeon .... etc.

    Read the article

  • How To Upgrade Wine from 1.2 to 1.5 in Maverick 10.10

    - by Subhash
    I am using Maverick Meerkat (10.10). It has Wine 1.2. I followed the instructions at WinHQ for updating wine. In Synaptic Package Manager, the highest version I get now for upgrading is 1.3, not 1.5. How can I get upgrade to Wine 1.5? I do not want to upgrade the Ubuntu version. It seems that some of the supporting libraries such as lib6 are old. I would like to know how I can update them so as to make Wine 1.5 available.

    Read the article

  • Seeking advice on system documentation

    - by Shadders
    I have a rating engine (it is basically an algorithm) which when I started had no formal documentation. We have created a functional specification/decomposition which is our business level document but now I need something more technical (a technical specification). What I am struggling to understand is what that document looks like, what format it should be in and to what level of detail we should go into. We are in the process of commenting all of the code. We also have a rough document called a Blueprint which reflects the flow of the model and is written in pseudo code. Is the combination of this blueprint and the model comments sufficient as a Technical Specification?

    Read the article

  • url mod_rewrite

    - by Pritam Borkar
    I had an e-commerce website hosted on http://mydomain.com/beta for more than a year, eventually I decided to move the website to root http://mydomain.com I had done quite a lot of link postings to forums etc, when my site used to be hosted in the sub-dir /beta . Is there any way to do a mod_rewrite by which all the old links that I have posted do not return as broken links since now longer the site is hosted in /beta and is now hosted on the site root. I did read that mod_rewrite can help resolve this issue, but also read about that this has to be done with care. Just a tip that this site is using Friendl URL.

    Read the article

  • Gettings Terms asscoiated to a Specific list item

    - by Gino Abraham
    I had a fancy requirement where i had to get all tags associated to a document set in a document library. The normal tag could webpart was not working when i add it to the document set home page, so planned a custom webpart. Was checking in net to find a straight forward way to achieve this, but was not lucky enough to get something. Since i didnt get any samples in net, i looked into Microsoft.Sharerpoint.Portal.Webcontrols and found a solution.The socialdataframemanager control in 14Hive/Template/layouts/SocialDataFrame.aspx directed me to the solution. You can get the dll from ISAPI folder. Following Code snippet can get all Terms associated to the List Item given that you have list name and id for the list item. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint; using Microsoft.Office.Server.SocialData; namespace TagChecker { class Program { static void Main(string[] args) { // Your site url string siteUrl = http://contoso; // List Name string listName = "DocumentLibrary1"; // List Item Id for which you want to get all terms int listItemId = 35; using (SPSite site = new SPSite(siteUrl)) { using(SPWeb web = site.OpenWeb()) { SPListItem listItem = web.Lists[listName].GetItemById(listItemId); string url = string.Empty; // Based on the list type the url would be formed. Code Sniffed from Micosoft dlls :) if (listItem.ParentList.BaseType == SPBaseType.DocumentLibrary) { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.Url.TrimStart(new char[] { '/' }); } else if (SPFileSystemObjectType.Folder == listItem.FileSystemObjectType) { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.Folder.Url.TrimStart(new char[] { '/' }); } else { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.ParentList.Forms[PAGETYPE.PAGE_DISPLAYFORM].Url.TrimStart(new char[] { '/' }) + "?ID=" + listItem.ID.ToString(); } SPServiceContext serviceContext = SPServiceContext.GetContext(site); Uri uri = new Uri(url); SocialTagManager mgr = new SocialTagManager(serviceContext); SocialTerm[] terms = mgr.GetTerms(uri); foreach (SocialTerm term in terms) { Console.WriteLine(term.Term.Labels[0].Value ); } } } Console.Read(); } } } Reference dlls added are Microsoft.Sharepoint , Microsoft.Sharepoint.Taxonomy, Microsoft.office.server, Microsoft.Office.Server.UserProfiles from ISAPI folder. This logic can be used to make a custom tag cloud webpart by taking code from OOB tag cloud, so taht you can have you webpart anywhere in the site and still get Tags added to a specifc libdary/List. Hope this helps some one.

    Read the article

  • A record point not working

    - by Peter
    I'm trying to do an A record point to transfer the hosting of a domain from one provider to another. I don't want to change the nameservers as this will result in emails going down. The output when I dig for the domain shows the correct IP (78.46.63.87) for the new host. I know A records can take a while to propagate but Its been over 36hrs now and I still keep getting this error(below) when I try to pull the domain through as an addon domain via Cpanel on the new host. Are the old nameservers conflicting with the A record point? here's the error: Using nameservers with the following IPs: 208.80.125.4,208.80.126.4,208.80.124.4,208.94.148.4 Sorry, the domain is already pointed to an IP address that does not appear to use DNS servers associated with this server. Please transfer the domain to this servers nameservers or have your administrator add one of its nameservers to /etc/ips.remotedns and make the proper A entries on that remote nameserver.

    Read the article

  • Website Stopped Showing From Google Search Results Sunddenly

    - by Aman Virk
    I have a design and development blog http://www.thetutlage.com (1.5 years old), which was doing really well in Google search as I was getting over 70% of my traffic from Google. Now suddenly from last two days it reduced the amount of traffic from 70% to 20% and also when I am trying to search for the exact posts that I can created even after appending my website name to it does not show any results for that. Sample Search Text: JQuery Game Programming Creating A Ping Pong Game Part 1 I have post with exact same title and it does not show it on Google search anywhere. I am totally shocked, I write my own unique content and follow Google guide lines like bible. Also there is no message under my webmasters account stating any problem or error.

    Read the article

  • Common practice in handling bounce message

    - by foodil
    At now I mainly create a mail account separately (with different domain name [email protected]) and i add this mail as one return path. So the bounce message will only go to that mailbox and i parse the mail message one by one to check the failure receipent and the error code, then i convert the error code to the actual error message. Finally, the error message and the fail receipent's mail are post to my system and let my system user check the bounce information. Is it a common practice? Since i am worry about the mail other from bounce message have sent to my mail box, that would be a disaster if i parse them without filter them out, but how can i filter out between bounce message and normal mail? Thank you for any kind of help.

    Read the article

  • Very few visitors on Analytics: incorrect setting?

    - by Akaban
    it's quite a long time Analytics is making me crazy: I have a 2 years old website, started with Aruba (an Italian provider) and then transfered on Hostgator. It's a blog Wordpress + MyBB forum, and on both the platforms I've the Analytics code in the footer. The problem is that the stats on Analytics are simply ridiculous compared to the numbers reported by the Aruba (before) and Hostgator (then). I think that the numbers of Aruba/Hostgator are correct, simply because just the daily users connected on the forum is higher than the Analytics numbers. I know it's a really confused request, but maybe you can help me to understand what's the problem.

    Read the article

  • 2D game - Missile shooting problem on Android

    - by Niksa
    Hello, I have to make a tank that sits still but moves his turret and shoots missiles. As this is my first Android application ever and I haven't done any game development either, I've come across a few problems... Now, I did the tank and the moving turret once I read the Android tutorial for the LunarLander sample code. So this code is based on the LunarLander code. But I'm having trouble doing the missile firing then SPACE button is being pressed. private void doDraw(Canvas canvas) { canvas.drawBitmap(backgroundImage, 0, 0, null); // draws the tank canvas.drawBitmap(tank, x_tank, y_tank, new Paint()); // draws and rotates the tank turret canvas.rotate((float) mHeading, (float) x_turret + mTurretWidth, y_turret); canvas.drawBitmap(turret, x_turret, y_turret, new Paint()); // draws the grenade that is a regular circle from ShapeDrawable class bullet.setBounds(x_bullet, y_bullet, x_bullet + width, y_bullet + height); bullet.draw(canvas); } UPDATE GAME method private void updateGame() throws InterruptedException { long now = System.currentTimeMillis(); if (mLastTime > now) return; double elapsed = (now - mLastTime) / 1000.0; mLastTime = now; // dUP and dDown, rotates the turret from 0 to 75 degrees. if (dUp) mHeading += 1 * (PHYS_SLEW_SEC * elapsed); if (mHeading >= 75) mHeading = 75; if (dDown) mHeading += (-1) * (PHYS_SLEW_SEC * elapsed); if (mHeading < 0) mHeading = 0; if (dSpace){ // missile Logic, a straight trajectorie for now x_bullet -= 1; y_bullet -= 1; //doesn't work, has to be updated every pixel or what? } boolean doKeyDown(int keyCode, KeyEvent msg) { boolean handled = false; synchronized (mSurfaceHolder) { if (keyCode == KeyEvent.KEYCODE_SPACE){ dSpace = true; handled = true; } if (keyCode == KeyEvent.KEYCODE_DPAD_UP){ dUp = true; handled = true; } if (keyCode == KeyEvent.KEYCODE_DPAD_DOWN){ dDown = true; handled = true; } return handled; } } } a method run that runs the game... public void run() { while (mRun) { Canvas c = null; try { c = mSurfaceHolder.lockCanvas(null); synchronized (mSurfaceHolder) { if (mMode == STATE_RUNNING) updateGame(); doDraw(c); } } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } finally { // do this in a finally so that if an exception is thrown // during the above, we don't leave the Surface in an // inconsistent state if (c != null) { mSurfaceHolder.unlockCanvasAndPost(c); } } } } So the question would be, how do I make that the bullet is fired on a single SPACE key press from the turret to the end of the screen? Could you help me out here, I seem to be in the dark here... Thanks, Niksa

    Read the article

  • How employable am I as a programmer?

    - by dsimcha
    I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

    Read the article

  • Ubuntu 12.10 - VirtualBox not sharing internet with guest system

    - by Fernando Briano
    I went from ArchLinux to Ubuntu on my dev box. I use VirtualBox to test web sites on Windows and IE. I have my Windows 7 VirtualBox image running on Ubuntu's VirtualBox. Back with ArchLinux, internet worked "out of the box" on the Windows boxes. I left the default options on the box's Network Options (NAT). The Windows machine shows as "connected to ethernet" but reports: The dns server isn't responding So I can't access Internet from there. I tried searching for Ubuntu's official docs but they seem pretty outdated. I tried using my old boxes from Arch (which boot normally but have no internet) and creating a new box from Ubuntu itself, but still get the same results. Update: I'm using VirtualBox 4.1.18 from Ubuntu's repository (apt-get install virtualbox).

    Read the article

  • C# Dev - I've tried Lisps, but I don't get it.

    - by Jonathan Mitchem
    After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

    Read the article

  • Creating SparseImages for Pivot

    - by John Conwell
    Learning how to programmatically make collections for Microsoft Live Labs Pivot has been a pretty interesting ride. There are very few examples out there, and the folks at MS Live Labs are often slow on any feedback.  But that is what Reflector is for, right? Well, I was creating these InfoCard images (similar to the Car images in the "New Cars" sample collection that that MS created for Pivot), and wanted to put a Tag Cloud into the info card.  The problem was the size of the tag cloud might vary in order for all the tags to fit into the tag cloud (often times being bigger than the info card itself).  This was because the varying word lengths and calculated font sizes. So, to fix this, I made the tag cloud its own separate image from the info card.  Then, I would create a sparse image out of the two images, where the tag cloud fit into a small section of the info card.  This would allow the user to see the info card, but then zoom into the tag cloud and see all the tags at a normal resolution.  Kind'a cool. But...I couldn't find one code example (not one!) of how to create a sparse image.  There is one page on the SeaDragon site (http://www.seadragon.com/developer/creating-content/deep-zoom-tools/) that gives over the API for creating images and collections, and it sparsely goes over how to create a sparse image, but unless you are familiar with the API already, the documentation doesn't help very much. The key is the Image.ViewportWidth and Image.ViewportOrigin properties of the image that is getting super imposed on the main image.  I'll walk through the code below.  I've setup a couple Point structs to represent the parent and sub image sizes, as well as where on the parent I want to position the sub image.  Next, create the parent image.  This is pretty straight forward.  Then I create the sub image.  Then I calculate several ratios; the height to width ratio of the sub image, the width ratio of the sub image to the parent image, the height ratio of the sub image to the parent image, then the X and Y coordinates on the parent image where I want the sub image to be placed represented as a ratio of the position to the parent image size. After all these ratios have been calculated, I use them to calculate the Image.ViewportWidth and Image.ViewportOrigin values, then pass the image objects into the SparseImageCreator and call Create. The key thing that was really missing from the API documentation page is that when setting up your sub images, everything is expressed in a ratio in relation to the main parent image.  If I had known this, it would have saved me a lot of trial and error time.  And how did I figure this out?  Reflector of course!  There is a tool called Deep Zoom Composer that came from MS Live Labs which can create a sparse image.  I just dug around the tool's code until I found the method that create sparse images.  But seriously...look at the API documentation from the SeaDragon size and look at the code below and tell me if the documentation would have helped you at all.  I don't think so!   public static void WriteDeepZoomSparseImage(string mainImagePath, string subImagePath, string destination) {     Point parentImageSize = new Point(720, 420);     Point subImageSize = new Point(490, 310);     Point subImageLocation = new Point(196, 17);     List<Image> images = new List<Image>();     //create main image     Image mainImage = new Image(mainImagePath);     mainImage.Size = parentImageSize;     images.Add(mainImage);     //create sub image     Image subImage = new Image(subImagePath);     double hwRatio = subImageSize.X/subImageSize.Y;            // height width ratio of the tag cloud     double nodeWidth = subImageSize.X/parentImageSize.X;        // sub image width to parent image width ratio     double nodeHeight = subImageSize.Y / parentImageSize.Y;    // sub image height to parent image height ratio     double nodeX = subImageLocation.X/parentImageSize.X;       //x cordinate position on parent / width of parent     double nodeY = subImageLocation.Y / parentImageSize.Y;     //y cordinate position on parent / height of parent     subImage.ViewportWidth = (nodeWidth < double.Epsilon) ? 1.0 : (1.0 / nodeWidth);     subImage.ViewportOrigin = new Point(         (nodeWidth < double.Epsilon) ? -1.0 : (-nodeX / nodeWidth),         (nodeHeight < double.Epsilon) ? -1.0 : ((-nodeY / nodeHeight) / hwRatio));     images.Add(subImage);     //create sparse image     SparseImageCreator creator = new SparseImageCreator();     creator.Create(images, destination); }

    Read the article

  • No internet access since 12.04

    - by Roelof
    I have updated yesterday to Ubuntu 12.04 but can not access the Internet. It is an old PC without wireless. But the older Ubuntu I had installed up until now (11.??) worked perfectly. I'm not that familiar with Ubuntu, and I have been trying Google for some time know, but I cannot find the answer. I noticed that running nm-tool resulted in some things that don't sound right: Type: wired Driver: ne2k-pci state: unavailable Default: no Carrier: off Does anyone have a way to fix the connection?

    Read the article

  • Wifi networks will not show up!

    - by Kcahmadi
    I'm running Ubuntu 14.04 on an old '08 macbook. I've gone to system settingsSoftware & UpdatesAdditional Drivers and enabled the wireless driver. But when I click the wifi icon on the top toolbar no networks show up. When running lshw it clearly shows my wireless card under Network controller and it says the driver is installed. However, nm-tool only shows ethernet. And rfkill only shows bluetooth. What can I do?

    Read the article

  • How do I stop that launcher from popping up when mouse goes to the left edge?

    - by Michael
    This is what it says on the help.ubuntu.com website, but when i go to system settings, it does not have a Launcher & Menus option. I wish I could revert back to the old Ubuntu, I hate this launcher. Does any know a fix plz? "Stop the launcher from showing when I point to the left side of the screen The launcher unhides when you move your mouse or touchpad pointer to the left side of the screen. If you prefer, you can tell Unity to only show the launcher when you click the top left Ubuntu button instead. Click the icon at the very right of the top bar and select System Settings. In the Personal section, click Launcher & Menus. Choose Touches the top left corner of the screen"

    Read the article

  • Unable to start Server Service on remote machine (2 replies)

    hi, i am trying to start Server service thru .net code on remote machine but unable to do so. here is the code.. ConnectionOptions con new ConnectionOptions(); con.Authority &quot;ntlmdomain:DomainName&quot;; con.Username &quot;x&quot;; con.Password &quot;123456&quot;; con.Impersonation ImpersonationLevel.Impersonate; con.Authentication AuthenticationLevel.Packet; con.EnablePrivileges true; ManagementScope ms new ManagementSco...

    Read the article

  • Does 64-bit Ubuntu work on the Acer Aspire One D255

    - by hippietrail
    The Acer Aspire One D255 is the cheapest dual core netbook on the market right now. It has an Intel Atom N550 which should be able to run a 64-bit OS. But when I try to boot the Ubuntu 64-bit live CD I only get one line of diagnostic output that it "found something" on the USB CD drive before locking up. I haven't been able to find anything by Googling yet. Could it just be driver issues for this machine or could the platform be inherently frail for running 64-bit? (My machine is two days old on trial and Windows 7 and Ubuntu 32-bit run but it has locked up under casual use on both OSes.)

    Read the article

  • brackets in php templates

    - by Othman
    I have a script, and now it's the perfect time to have an option to change theme templates. I was looking forward to store these files in php files, or html files. with CSS file. I looked over some codes and I found that they use brackets to refer to the variable. Here's an example of a template block: <div class='block_div'> <center>{title}</center> {content} </div> I know that I can use PHP vars usering <?=$var;?>. However, I think the one above is better, and I looked over the web to find anything about it but I couldn't. My Question is how I can use these brackets in my php or html code. to let the user changing the template only not the code!

    Read the article

  • Why ISVs Run Applications on Oracle SuperCluster

    - by Parnian Taidi-Oracle
    Michael Palmeter, Senior Director Product Development of Oracle Engineered Systems, discusses how ISVs can easily run up to 20x faster, gain 28:1 storage compression, and grow presence in the market all without any changes to their code in this short video. One of the family of Oracle engineered systems products, Oracle SuperCluster provides maximum end-to-end database and application performance with minimal initial and ongoing support and maintenance effort, at the lowest total cost of ownership. Java or enterprise applications running on Oracle Database 11gR2 or higher and Oracle Solaris 11 can run up to 20X faster than traditional platforms on Oracle SuperCluster without any changes to their code.  Large number of customers are consolidating hundreds of their applications and databases on Oracle SuperCluster and are requiring their ISVs to support it. ISVs can become Oracle SuperCluster Ready and Oracle SuperCluster Optimized by joining the Oracle Exastack program. 

    Read the article

  • Elegant ways to handle if(if else) else

    - by Benjol
    This is a minor niggle, but every time I have to code something like this, the repetition bothers me, but I'm not sure that any of the solutions aren't worse. if(FileExists(file)) { contents = OpenFile(file); // <-- prevents inclusion in if if(SomeTest(contents)) { DoSomething(contents); } else { DefaultAction(); } } else { DefaultAction(); } Is there a name for this kind of logic? Am I a tad too OCD? I'm open to evil code suggestions, if only for curiosity's sake...

    Read the article

< Previous Page | 886 887 888 889 890 891 892 893 894 895 896 897  | Next Page >