Search Results

Search found 8472 results on 339 pages for 'boot'.

Page 9/339 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Computer will not boot - disk read error - cannot boot from HD or DVD

    - by Grant Palin
    This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

    Read the article

  • Why does my Grub have two entries for Windows?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • No Option To Duel Boot Ubuntu 12.04 USB

    - by Jordan
    I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

    Read the article

  • Grub2 with BURG: duplicate Windows entries, how do I remove one?

    - by Tomas Lycken
    I have a dual boot system with Ubuntu 12.04 and Windows 7, using GRUB2 (with Burg) as boot loader. For some reason, the Windows installation shows up twice in the boot menu: Ubuntu GNU/Linux, with Linux 3.2.0-24-generic Ubuntu GNU/Linux, with Linux 3.2.0-24-generic (recovery mode) Windows 7 (loader) (on /dev/sda1) Windows 7 (loader) (on /dev/sda2) If I look in my partition table, /dev/sda2 is C:\ of the Windows installation, and /dev/sda1 is the "System Reserved" partition (which, IIRC, is Windows' own bootloader). Furthermore, gparted shows /dev/sda2 - but no other partitions - with a boot flag: What is going on here? I'd like to have only the entries for Ubuntu and one entry for Windows in my boot menu - how do I remove one of them?

    Read the article

  • Ubuntu will not boot without the pen-drive [closed]

    - by user71238
    Possible Duplicate: Can't boot without Flash Drive plugged in I've just installed Ubuntu on my PC and now it doesn't start unless I change the boot priority, if boot priority is my HD then it doesn't start and if boot priority is my pen-drive then it starts. If I remove my pen-drive, the system keep working normal, but if a restart my PC without the pen-drive, it will not start. Could someone help me?

    Read the article

  • Computer doesn't boot, continuously restarts; possible disk error

    - by Olcay Ertas
    I have shut down my computer two hours ago. When I open my computer it started restarting itself after showing the POST screen. I can open my computer with a Ubuntu Live CD or Windows installation CD. I can also open and boot my computer with my second drive, so I think something is wrong with my primary hard drive. Do you have any idea what the problem might be and how can I fix it? I am using an HP DV9087EA laptop and my primary disk is a WD500GB. I have installed Ubuntu 10.10 and Windows 7 on my drive.

    Read the article

  • Boot-camp wont boot into os x

    - by Aron Horan
    I've tried everything but I can't get MacBook 1,1 (which was running leopard) to boot os x after installing windows 7. I had the drivers for windows in a .pkg file and didnt realise it won't install them in windows. I am totally stuck with a half usefull windows system, any help would be greatly appricatet. Note: I've tried every startup command (ie hold x, hold option, hold c)with no joy, my head is wrecked

    Read the article

  • GRUB2 not working after installing xubuntu 14.04

    - by h3bm
    I have a vaio laptop and it used to have installed windows 8 and Xubuntu 13.04 in dual boot, everything was working fine. I decided to update my version of xubuntu 14.04 LTS mainly because the support for 13.04 is finished and LTS version have 3 years of support. What I did was to format the partition where xubuntu 13.04 was installed and install 14.04 in that formated partition. When I restarted my computer willing to start using my new system I got the following message: error: symbol 'grub_term_highlight_color' not found and I was not able to enter any OS. I tried boot-repair from live USB more than two times and it did not fix the problem. I tried to enter to my computer using super GRUB2 disk, however it does not apperar to work with UEFI active (besides super grub2 disk says it can) I only get the message "no operating system found". If I boot super grub2 disk with UEFI disabled, super grub2 disk can not detect any OS,I also tried Rescatux distro, however, as of super grub2 disk, rescatux cannot enter when UEFI is active. I tried boot-repair with the option of "restore EFI backups", after that I was able to boot on windows, but no grub menu appeared. I ran boot-repair again with no improving results Here is the last Bootinfo report I got: http://paste.ubuntu.com/7609801/ Do you have any idea of what is happening? I really appreciate your help, Best regards,

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • Ubuntu USB boot failure

    - by Steve
    When trying to boot from a boot USB drive I got the message, "Vesamenu.c32:Not a com32r image." I was trying to boot a fairly new Toshiba laptop with a Ubuntu 10.04.2 LTS created USB boot. I re-created the USB drive with 11.04 and it booted fine. These were both 32 bit versions even though the laptop is a 64 bit. I was trying to create a generic boot USB that would work on everything I might try it on. What is the consensus on this idea? Any solution to the above error? Thanks from a noobe.

    Read the article

  • Ubuntu suddenly won't boot on a Mac

    - by emchristiansen
    I installed 11.10 in dual-boot mode following instructions here: https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation Everything worked fine, until I recently updated from Mac OS 10.6.x to the latest 10.6.x (this was a minor update prompted by OS X). The update made the rEFIt screen disappear, so I ran Boot Repair and reinstalled rEFIt and everything worked. I accidentally left my computer without power while booted into Ubuntu, until it presumably died or hibernated itself. I have been unable to boot into Ubuntu since. I didn't see the GRUB screen when I selected Linux the rEFIt chooser. Then I reinstalled rEFIt and the Linux option disappeared from the rEFIt chooser. This is a link to the boot info collected by Boot Repair: http://paste.ubuntu.com/755543/ Any help would be appreciated, especially an explanation of what all these components are (EFI, MBR, GPT, GRUB), where they live on disk, how the system knows to find each component, and how they relate to each other. Thanks!

    Read the article

  • Can't Dual Boot Ubuntu 12.04 and Windows 7 on Sony Vaio S 15 (2012)

    - by Nathaniel
    I just bought my dad a new laptop for fathers day, a Sony Vaio S 15 (the latest models from Sony) and he wants to dual boot Ubuntu and Windows 7. I put Ubuntu 12.04 on a USB drive and went to install it on the computer, but when I got into the partition part of the install there was no option to dual boot. Only to delete everything and install Ubuntu or 'other'. I installed using the 'other' feature by manually partitioning, however once I installed it the computer wouldn't ever go to grub. From inside windows I used Easy BCD to try and fix the boot loader so it would give the option to boot into Windows 7 or Ubuntu 12.04, but it couldn't detect ANY operating systems on the computer (not even windows). Is it not possible to dual boot on the latest Sony Vaios, or is there a workaround for this?

    Read the article

  • Can't boot without Flash Drive plugged in

    - by vlad
    (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

    Read the article

  • ubuntu broke my windows boot

    - by Then Enok
    I was installing ubuntu on pendrive and once finished I needed to run windows a bit, even though I chose erase and install ON THE PENDRIVE it altered my hdd boot sector When I remove the ubu cd and pendrive it should only boot from hdd (windows) but it gives Error: no such device : blablabla(numerbes and letters) Grub rescue _ If I place the pendrive inside it asks me whether to start windows or linux (windows works here) I need to run windows without the pendrive, how can I remove grub from the hdd and also run ubuntu from the pendrive(once I remove grub from the hdd) || THX ArK, your information help me do wonders! :) || Now... it seems that without grub i can not boot the ubuntu from the pendrive anymore, blank screen and nothing loads(i did check the ubuntu with the grub from the hdd, and everything inside it worked perfectly (except the clock, it didnt find my local hour...) ) New problem: it seems that grub which is now on the pendrive is always asking me whether to boot from windows or ubuntu F*ck of course i want to boot ubuntu otherwise i would stick the pen inside the computer

    Read the article

  • failed to get i915 symbols, graphics turbo disabled error on boot

    - by Gaurav Butola
    Whenever I boot my laptop, I see this message and it makes the boot process very slow as my screen stays black for a long time before this message appears. It shows just for a split second but today It got worst when my system couldn't boot and stuck on this error, I did several reboots but still couldn't pass this boot error message, then after sometime it fixed itself and now I can use my system as normal. I didn't pay much attention to the error when It was there for just a split second and making my boot process slow, but now that it has stopped me from booting into my system, I would like to know why this error occurring. Error-- ...failed to get i915 symbols, graphics turbo disabled....

    Read the article

  • How to Access Boot Options 12.04 Live USB

    - by Ryan Kampmeier
    I'm attempting to install 12.04 on my computer but booting from my USB drive results in a blank screen. This has happened since 10.04 and has always been fixed by putting nomodeset in the boot command, but now I can't access the boot options with F6 for some reason. How can I access the boot options? I booted into the live image on a different computer and it worked fine. I'm sure it's because of my Nvidia graphics. When I boot into the live image it shows a small gray box in the lower left corner of the screen and that's it. I can't edit the boot options or do anything else. Thanks in advance.

    Read the article

  • Ubuntu on USB does not boot on MacBook

    - by Sean H
    Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

    Read the article

  • System doesn't boot when ubuntu is installed on an SSD

    - by Caetano Nichnich Nunes
    I've recently discovered Ubuntu and decided to give it a try. I am using a Samsung Series 5 p530u3c-ad1 which comes with a 24gb SSD and a ~500gb HDD, My intention is to set the system files to the ssd and the rest to the HDD. The system works fine if I do a direct install using only the HDD, but if I try using the SSD for the system files the computer doesn't boot-up, I do not know if the SSD is being recognized by the computer, I think so because I could install Ubuntu on it, but it doesn't appear on the boot order or the boot menu. I read some posts and tried using boot-repair which pointed me not to forget to set my system to boot from my SSD, unfortunately I cannot because of the issues mentioned above. Thanks for your time.

    Read the article

  • Ubuntu 13.04 on UEFI system with Windows Boot Manager as the main loader

    - by Mehrdad
    On my old laptop (legacy BIOS, MBR disk), this was perfectly possible to get working: I turn on the computer and see the Windows Boot Manager I use EasyBCD (or BootPart, or something else) to add an option to the BCD menu which allows me to boot into GRUB, and then into Ubuntu I can't figure how to do this on my new laptop (UEFI, GPT disk), whether in UEFI or legacy mode. Currently I've installed (and even booted!) Ubuntu on my laptop, but only with the help of an external GRUB (on a USB flash drive). How can I add GRUB as an option in the Windows Boot Manager on a UEFI laptop? (No, I don't want to change my primary boot loader. So no, I don't want to overwrite the Windows boot loader with GRUB.)

    Read the article

  • Ubuntu fail to start on a dual boot with Windows 7 on Vaio

    - by user94628
    I followed the instructions for the Ubuntu windows installer on my Sony Vaio laptop (model SVT131A11M). Upon restart I was prompt to choose the OS for boot (Win7 or Ubuntu), but then I shut down the machine and from the next boot, every time I choose to boot into Ubuntu, the GNU GRUB terminal appears with a grub> prompt. Now I'm able to boot into Win7, but can't boot into Ubuntu properly. Why does it happen and how come I was able to start Ubuntu successfully the first time?

    Read the article

  • Dual boot: Linux Grub loader does not show windows

    - by user292099
    my computer previously only had windows installed on it. Recently I decided to try Linux and opted for a dual boot so I installed Linux Mint 17 Cinnamon 64-bit on a separate hard drive within my computer. After installation my computer would directly boot to Linux upon start up and did not even show a grub screen. Using the boot-repair I was finally able to make the Grub loader show a boot list upon start up, but the Windows partition is not there. The boot-info summary is found on this link. http://paste2.org/9pIGZtDv Any help would be great Motherboard: Gigabyte z77 ud5h OS: Linux Mint 17 Cinnamon 64-bit & Windows 8.1 64-bit

    Read the article

  • how to skip grub dual boot option menu entirely (without picking an OS to boot)

    - by bevcan izBevk
    I'd like to skip the entire Grub 2 interface, where I have to decide booting Linux or Windows im running linux ubuntu lastest version (14.04.1 LTS) and windows 8.1 both 64 bit versions. I've installed easyBCD software, which I want to use as (my only) boot manager. Issue: whenever I run my computer, I get grub interface to pick Linux or Windows, after that I get easyBCD interface where I have to pick linux or windows again. If both choices are the same, proper system boots, else I get thrown back to beggining (grub UI). I'd like to somehow delete / skip grub from appearing. TLDR title :) thank you for helping!

    Read the article

  • Unable to boot from new SSD after installing from USB

    - by user73725
    I'm using a new SSD with nothing on it. It's installed via USB drive, and boots from USB as well. While in Ubuntu I can see the SSD and other devices. When I install from the desktop (have tried from the boot screen as well), system restarts. It takes me to the boot screen, select boot from first hard disk, nothing, goes right back to boot screen. When I take the USB out, it hangs on "Verifing DMI." If I boot onto the USB I can see the correct files located in the SSD. I have a basic knowledge of computers. Give me any thing you think would help. No other OS's are loaded. Gigabyte ga-k8n-sli 1GB RAM AMD Athlon 64 x2 dual core 3800+ OCZ SSD Agility 3 120GB

    Read the article

  • Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

    - by mvburgos
    Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

    Read the article

  • 12.04 upgrade broke grub? (not wubi related)

    - by kaare
    I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >