Search Results

Search found 2528 results on 102 pages for 'cheungcc 2000'.

Page 9/102 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • vb6 applications in Windows server 2003

    - by Shoban
    We have some legacy applications which are running on our Win 2000 machines for a long time. There are few Win 2003 machines as well. We are planing to decommission these Win 2k server and move these applications to Windows 2003. Will there be any issues in running these vb6 applications? Should I worry about anything specific to Win 2000 and Win 2003? Can I use the compatibility mode if I have any issues?

    Read the article

  • What's wrong with my wireless?

    - by dazzle
    I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

    Read the article

  • Server 2003 and SSL Certificates

    - by Keith Stokes
    I have a Windows 2000 domain with dozens of Windows 2000 servers and a few 2003 servers. Each server runs a custom app talking to a 3rd party utilizing self-signed certificates. To help troubleshooting we've created a custom test app. The 2000 servers are able to talk within seconds. The 2003 servers take anywhere from 10-30 seconds using a domain account and much less, usually under 5 seconds using a local account. The only exception to the local account performance is a new account, which is slow initially then faster. If you leave the test app open and reconnect repeatedly it talks in seconds. If you leave it open for sometime between 1 and 2 hours, it reverts back to the previous 10 seconds, so obviously something is caching. Installing the destination certificates in the local 2003 server store makes no difference. I've installed the certificates in AD and that apparently makes domain accounts work in 9-12 seconds, vs 30 seconds that was regular before. Manually clearing the certificate store on the 2003 server makes no difference. I'm at a loss as to where the certs might be cached and if I'm using some sort of domain certificate store that's hiding from me.

    Read the article

  • Converting from SQL Server 2000 to 2005 for ASP.NET web App

    - by Bazza Formez
    Hi there, I'm moving my ASP.NET website to a new provider. Only problem is, old host support my SQL Server 2000 db. New host only supports SQL Server 2005. How should I go about the conversion ? Can I simply produce a backup of the 2000 (.bak) file at the old host, and restore that file into SQL Server 2005 at the new host ? Or is there more to it ?? Note that I don't own a copy of SQL Server 2005 at home... and I'm trying to avoid having to do so. Thanks, Bazza

    Read the article

  • MS SQL Server 2000 tables

    - by klork
    We currently have an MS SQL Server 2000 database with one table containing data for multiple users. The data is keyed by memberid which is an integer field. The table has a clustered index on memberid. The table is now about 200 million rows. Indexing and maintenance are becoming issues. We are debating splitting the table into one table per user model. This would imply that we would end up with a very large number of tables potentially upto the 2,147,483,647, considering just positive values. My questions: 1) Does anyone have any experience with a MS SQL Server (2000/2005) installation with millions of tables? 2) What are the implications of this architecture with regards to maintenance and access using Query Analyzer, Enterprise Manager etc. 3) What are the implications to having such a large number of indexes in a database instance. All comments are appreciated. Thanks

    Read the article

  • php fail to open a sqlserver 2000 database

    - by Mike108
    I can use the sql server management studio to open a sqlserver 2000 database, but I can not open the same database in a php page using the same user and password. what is the problem? if(!$dbSource->open("192.168.4.241:1433","sa","sa","NorthWind")) { echo "Fail to open the sql server 2000 database"; } ----------------------- function open($db_server, $db_user, $db_password, $db_name) { $this->conn = mssql_connect($db_server, $db_user, $db_password); if(!$this->conn) { return false; } @mssql_select_db($db_name, $this->conn); return true; }

    Read the article

  • What is the correct connection string for SQL 2000 server in entity framework

    - by M-Askman
    I success to use entity framework for MySQL but reverse code can not be used with SQL Server 2000, then i guess to change connection string to connect SQL Server 2000, however, got error <add name="BetterContext" connectionString="Data Source=server2;Initial Catalog=GoodDB;User ID=sa;Password=hello;MultipleActiveResultSets=True;" providerName="System.Data.SqlClient" /> An error occurred while getting provider information from the database. This can be caused by Entity Framework using an incorrect connection string. Check the inner exceptions for details and ensure that the connection string is correct public partial class BetterContext : DbContext { static BetterContext() { Database.SetInitializer<BetterContext>(null); } public livefeedContext() : base("Name=BetterContext") { }

    Read the article

  • SQL Server - MVP 2010

    - by JustinL
    I was very happy to receive an email last week to confirm I would receive the MVP Award for SQL Server for 2010 - very exciting news ! I missed the first FedEx delivery, however this weekend they were able to successfully deliver the package from Microsoft and it began to feel very real as I opened the box to find the MVP glass-ware! Since leaving Microsoft, the past couple of years have been incredibly challenging, exciting and satisfying.  The MVP Award is really special, the SQL community has a fantastic, international base with many successful events, leaders and contributors providing an impressive network both online and in-person. I'm really excited about the year ahead - starting this week with SQL Bits in London, followed by PASS EMEA in Germany next week and at the London PASS user group meeting on Monday 26th April. Regards,   Justin Langford - Coeo Ltd

    Read the article

  • What is the best way to design a table with an arbitrary id?

    - by P.Brian.Mackey
    I have the need to create a table with a unique id as the PK. The ID is a surrogate key. Originally, I had a natural key, but requirement changes have undermined this idea. Then, I considered adding an auto incrementing identity. But, this presents problems. A. I can't specify my own ID. B. The ID's are difficult to reset. Both of these together make it difficult to copy over this table with new data or move the table across domains, e.g. Dev to QA. I need to refer to these ID's from the front end, JavaScript...so they must not change. So, the only way I am aware of to meet all these challenges is to make a GUID ID. This way, I can overwrite the ID's when I need to or I can generate a new one without concern for order (E.G. an int based id would require I know the last inserted ID). Is a GUID the best way to accomplish my goals? Considering that a GUID is a string and joining on a string is an expensive task, is there a better way?

    Read the article

  • Which Edition of SQL Server 2008 R2 should you use?

    - by BuckWoody
    SQL Server 2008 R2 has just released to manufacturing (RTM’d) as I write this. With each new release, we make changes to the “Editions” we offer. A SQL Server “version” deals with the major changes in the product – and “edition” is a set of features and capabilities within that version (you’re welcome). So… definitely run over to http://msdn.microsoft.com/en-us/library/cc645993(v=SQL.105).aspx and check out the changes. For instance, did you know that SQL Server Express now supports 10GB databases? Well, then get over there and read what each edition does. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • SqlBulkCopy causes Deadlock on SQL Server 2000.

    - by megatoast
    I have a customized data import executable in .NET 3.5 which the SqlBulkCopy to basically do faster inserts on large amounts of data. The app basically takes an input file, massages the data and bulk uploads it into a SQL Server 2000. It was written by a consultant who was building it with a SQL 2008 database environment. Would that env difference be causing this? SQL 2000 does have the bcp utility which is what BulkCopy is based on. So, When we ran this, it triggered a Deadlock error. Error details: Transaction (Process ID 58) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. I've tried numerous ways to try to resolve it. like temporarily setting the connection string variable MultipleActiveResultSets=true, which wasn't ideal, but it still gives a Deadlock error. I also made sure it wasn't a connection time out problem. here's the function. Any advice? /// <summary> /// Bulks the insert. /// </summary> public void BulkInsert(string destinationTableName, DataTable dataTable) { SqlBulkCopy bulkCopy; if (this.Transaction != null) { bulkCopy = new SqlBulkCopy ( this.Connection, SqlBulkCopyOptions.TableLock, this.Transaction ); } else { bulkCopy = new SqlBulkCopy ( this.Connection.ConnectionString, SqlBulkCopyOptions.TableLock | SqlBulkCopyOptions.UseInternalTransaction ); } bulkCopy.ColumnMappings.Add("FeeScheduleID", "FeeScheduleID"); bulkCopy.ColumnMappings.Add("ProcedureID", "ProcedureID"); bulkCopy.ColumnMappings.Add("AltCode", "AltCode"); bulkCopy.ColumnMappings.Add("AltDescription", "AltDescription"); bulkCopy.ColumnMappings.Add("Fee", "Fee"); bulkCopy.ColumnMappings.Add("Discount", "Discount"); bulkCopy.ColumnMappings.Add("Comment", "Comment"); bulkCopy.ColumnMappings.Add("Description", "Description"); bulkCopy.BatchSize = dataTable.Rows.Count; bulkCopy.DestinationTableName = destinationTableName; bulkCopy.WriteToServer(dataTable); bulkCopy = null; }

    Read the article

  • Convert query with system objects from SQL 2000 to 2005/2008

    - by Dan
    I have some SQL I need to get working on SQL 2005/2008. The SQL is from SQL 2000 and uses some system objects to make it work. master.dbo.spt_provider_types master.dbo.syscharsets systypes syscolumns sysobjects I know SQL 2005 does no longer use system tables and I can get the same information from views, but I am looking for a solution that will work for both SQL 2000 and 2005/2008. Any ideas? select top 100 percent TABLE_CATALOG = db_name(), TABLE_SCHEMA = user_name(o.uid), TABLE_NAME = o.name, COLUMN_NAME = c.name, ORDINAL_POSITION = convert(int, ( select count(*) from syscolumns sc where sc.id = c.id AND sc.number = c.number AND sc.colid <= c.colid )), IS_COMPUTED = convert(bit, c.iscomputed) from syscolumns c left join syscomments m on c.cdefault = m.id and m.colid = 1, sysobjects o, master.dbo.spt_provider_types d, systypes t, master.dbo.syscharsets a_cha /* charset/1001, not sortorder.*/ where o.name = @table_name and permissions(o.id, c.name) <> 0 and (o.type in ('U','V','S') OR (o.type in ('TF', 'IF') and c.number = 0)) and o.id = c.id and t.xtype = d.ss_dtype and c.length = case when d.fixlen > 0 then d.fixlen else c.length end and c.xusertype = t.xusertype and a_cha.type = 1001 /* type is charset */ and a_cha.id = isnull(convert(tinyint, CollationPropertyFromID(c.collationid, 'sqlcharset')), convert(tinyint, ServerProperty('sqlcharset'))) -- make sure there's one and only one row selected for each column order by 2, 3, c.colorder ) tbl where IS_COMPUTED = 0

    Read the article

  • LINQ to Entites - Left Outer Join - SQL 2000

    - by user255234
    Hi! I'm using Linq to Entities. I have the following query in my code, it includes left outer Join: var surgeonList = (from item in context.T1_STM_Surgeon.Include("T1_STM_SurgeonTitle") .Include("OTER").Include("OSLP") join reptable in context.OSLP on item.Rep equals reptable.SlpCode into surgRepresentative where item.ID == surgeonId select new { ID = item.ID, First = item.First, Last = item.Last, Rep = (surgRepresentative.FirstOrDefault() != null) ? surgRepresentative.FirstOrDefault().SlpName : "N/A", Reg = item.OTER.descript, PrimClinic = item.T1_STM_ClinicalCenter.Name, Titles = item.T1_STM_SurgeonTitle, Phone = item.Phone, Email = item.Email, Address1 = item.Address1, Address2 = item.Address2, City = item.City, State = item.State, Zip = item.Zip, Comments = item.Comments, Active = item.Active, DateEntered = item.DateEntered }) .ToList(); My DEV server has SQL 2008, so the code works just fine. When I moved this code to client's production server - they use SQL 2000, I started getting "Incorrect syntax near '(' ". I've tried changing the ProviderManifestToken to 2000 in my .edmx file, then I started getting "The execution of this query requires the APPLY operator, which is not supported in versions of SQL Server earlier than SQL Server 2005." I tied changing the token to 2005, the "Incorrect syntax near '(' " is back. Can anybody help me to find a workaround for this? Thank you very much in advance!

    Read the article

  • RRAS won’t start with 8007042a or event ID 7024, aka the “routing remote access unable to load Iprtrmgr.dll”

    - by KCotreau
    History: The history of this error, which has mostly gone unsolved, dates back to Windows 2000. Platforms affected: Windows Server 2008 R2, Server 2008, Server 2003 R2, Server 2003, Server 2000 (both 32-bit and 64-bit installs are affected). Error Messages Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 2 (0x2). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 31 (0x1F). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 20205 (0x4EED). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 193 (0xC1). Event ID: 20103 Unable to load C:\WINDOWS\System32\iprtrmgr.dll . (32-bit installs). Event ID: 20103 Unable to load C:\WINDOWS\SysWOW64\iprtrmgr.dll . (64-bit installs).

    Read the article

  • How to change local user home folder on Windows 2000 and above

    - by Adi Roiban
    I was using a local account on a Windows 7 desktop that is not connected to any Active Directory. After a while it was required to rename the local account. Renaming the account was simple using Local users and groups management tool. After renaming the user, the user home folder was not renamed and I could not find any information about how to change user home folder. I found the ProfileList registry folder but maybe there is a command line for doing such changes. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Any help is much appreciated. Thanks!

    Read the article

  • How to change local user home folder on Windows 2000 and above

    - by Adi Roiban
    I was using a local account on a Windows 7 desktop that is not connected to any Active Directory. After a while it was required to rename the local account. Renaming the account was simple using Local users and groups management tool. After renaming the user, the user home folder was not renamed and I could not find any information about how to change user home folder. I found the ProfileList registry folder but maybe there is a command line for doing such changes. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Any help is much appreciated. Thanks!

    Read the article

  • How to create a shared lock blocking an intent exclusive lock

    - by FremenFreedom
    As I understand it, a SELECT statement will place a shared lock on the rows that it will return. While that SELECT is running, if an UPDATE statement comes along and needs to grab an intent exclusive lock then that UPDATE statement will need to wait until the SELECT statement releases its shared locks. I am trying to test this SELECT shared lock thing by doing a BEGIN TRAN and then running a SELECT, not COMMITing, and then running an UPDATE in another session on the exact same row. The UPDATE worked fine -- no lock, no wait. So this must not be a valid way to simulate a shared lock blocking an intent exclusive lock? Can you give me a scenario where I can create a lock with a SELECT that would force an UPDATE to wait? I'm working with SQL Server 2000 and 2005 across a linked server: the table is on the 2005 instance, the select is happening on 2000, and the update is executed from 2005. All in SSMS 2005.

    Read the article

  • restoring a failed SBS 2000 box...

    - by Brad Pears
    Hi there, I read a post where you had mentioned you have had a PERC card blow up on you in an SBS box... I've got a similar situation where one of my RAID drives failed and then the power supply failed before I could replace the drive... I then replaced the power supply and the failed drive and reconfigured the RAID array. I had a recent full backup of the my Win2k SBS's C: drive stored on my SYmantec backup exec server so I installed win2K server on the c: partition and then once I had that up and running, installed the backup exec agent so as to do a restore of the entire c drive including system state. THis all worked just fine, until I had to reboot. I received an "incorrect drive configuration" error and then it hangs. I figure that likely makes sense becasue I think my RAID array is configured slightly different now in that the partitions may be sizeded ever so slightly differently now than they were before I think... Is there a way I can just restore from my backup BUT maybe exclude some of the registry and hidden boot files it wants to restore so that it is booting with the current configuration now active on that machine - not the pre blow up configuration files? I also read a post that indicated you might have to install the exact same service pack etc... etc.. before attemting a restore but that does not make sense to me being as the entire c drive contents are going to be overwritten by the restore anyway? THe basic OS install is just to be able to get the backup exec agent installed . I can;t understand why one would need to install the exact same SP level. CAn you shed some light on what I might be able to do to get this thing up and running? Thanks,Brad

    Read the article

  • Apache / PHP Begins to Deny SQL Requests after about 2000

    - by Daniel Stern
    We have a web page on our server that we use to run administrative scripts. For example, we might run the script "unenrolStudents()" which runs 5,000 SQL SET commands one after another and sets 5000 student entries in an SQL database to unenrolled. However, we are finding that after running a few thousand queries (it is not totally consistent) we will be "locked out" by our server. SYMPTOMS OF LOCKING OUT: - unable to connect to server with winSCP - opening putty with that connection shows a blank screen (no login / pass) - clearing cookies / cache in chrome does NOT fix locking out - other computers in the office ALSO become locked out - locking out can be triggered with a high frequency of requests (10000 in 1 second) or by less over time (10000 in 500 seconds - this will still cause a lockout even though the frequency is much less) We believe this is a security feature of our own Apache. I know we are using Suhosin but I didn't configure it so I don't know. How can I disable this locking effect so that I can confidently run all my SQL requests and they will go through? Has anyone else dealt with this and found workarounds? Thanks DS

    Read the article

  • Internet Explorer 6 Encountered An Error ntl.dll Issue on XP and Win2000

    - by Gary B2312321321
    As we have some PC's still running Windows 2000 and this is beyond our control we use IE 6 so we can keep the IE platform standard. Recently on some XP and Win2000 PCs IE has been crashing with the Encountered a Problem and Needs to close do you want to send a message to Microsoft error when entering some sites. This happens even after a format reinstall with minimal software load (Office 2000, some avaya software, kaspersky, tapiex.dll). The module pointed to in the error report is ntl.dll. There are lots of reports over the net of the problem but has anyone resolved this issue? (Latest IE6 updates are installed). Also please note there were no 3rd party IE addons, spyware, viruses or adware Hope someone can help.

    Read the article

  • Remote desktop logs in with saved credentials when connecting from one computer but asks for username and password from another.

    - by AndrejaKo
    I have two computers on which I recently installed windows 7 64 bit. Using VPN, they connect to remote network on which there is a Windows Server 2000 SP4 computer. User is supposed to connect to server using remote desktop. I set same VPN and remote desktop settings on both computers with Windows 7. I set Remote desktop to save connection credentials on both computers, but when I connect to server form one computer, it uses saved credentials and I don't get log-in prompt on server side. On the other computer with same settings using same username and password, I get log-in prompt once the remote desktop connects to server. I even tried copying the .rdp file from the computer on which everything is working fine to the other computer, but that didn't help. Note that I'm not trying to have both computers connected at the same time. What is causing this and how do I make the other computer skip windows server 2000 log-in prompt.

    Read the article

  • TempDB is Full Issue for SQL Server 2000

    - by Jason N. Gaylord
    Even though the log file shows that there is over 1 GB of free space, we start receiving an error message every 3 or 4 days saying that the TempDB file is full. I know cursors impact the TempDB file, but is there anything else I should be looking at to see why this keeps happening? I've tried running SQL Profiler, but when running it, it slowed down the DB so much that the users were experiencing timeouts. What specific items should I check for in SQL Profiler?

    Read the article

  • Jpeg 2000 and .net

    - by pho3nix
    I working in a activex control using .net for load it in a ie website. I need read a jpeg 2000 file but i don't want use a 3rd party dll because this will cause dependencies or embedding it make my dll very big. Anyone have idea where i can find a class .cs for embedded on my project, i need only read file, no write only read.

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >