Search Results

Search found 387 results on 16 pages for 'household electronics'.

Page 9/16 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • What programming Langauge Would you learn to Reengineer USB Devices? [closed]

    - by user70113
    Currently Work in IT support and am retraining in electrical engineering / electronics, I am also interested in Reverse Engineering which language would be best for Hardware RE, I have seen a few sources say C, C++ and Python? I am not familiar with Linux, but installed ubuntu to learn with. I am not a programmer far from it, but I can understand enough basic VB,Java and PHP to edit it for simple things. One of my immediate projects would be to learn to reverse engineer USB devices and write my own low level drivers, I know there are porting kits, but I really want to know it from the ground up. Thanks for any advise folks Most Appreciated.

    Read the article

  • Share Pc' s wifi internet connection to router and spit it out trough it

    - by Maken
    Basicly im trying to share the an internet connection that i receive through wifi from my bestfriend's place to my place and Extend it trough a router for my consoles and other computers in my household i have 1 pc with Wifi /Ethernet , one router "DD-wrt"ed" Schema is like this Internet -----Modem------- (Friend's)Router -----to my PC through Wifi (Ics)---- to Router(2) through lan----- to Computer 1 (over lan or wifi etc...) ------ Computer 2 (over lan or wifi etc...) i want the computer 1 and 2 to have internet from Router(2) if its not clear enough il try to give more details but a little help would be greatly appreciated

    Read the article

  • Mouse for a lefty?

    - by Kyralessa
    As a programmer, I'm fairly particular about my keyboard and mouse. One thing I've only recently noticed is that the mice I tend to prefer don't work well for my five-year-old. He's left-handed, but ends up mousing with his right hand on the computer because (a) that's where the mouse is, and (b) most mice are designed for right-handed people anyway. So, a couple of questions: If you're left-handed and you mouse with your left hand, do you have any recommendations on good mice? If you have a lefty in your household (whether or not it's you), is there an easy way to swap settings between left-handed and right-handed mouse buttons? One way is Control Panel Mouse Check the box on the first tab OK. Do you know of anything faster? Or, better yet, what I'd really like is a way to reverse those settings on only one particular mouse, which would be designated as my son's mouse.

    Read the article

  • Wireless connection switches off IP address

    - by Sanjay Gupta
    I have a Lenovo laptop with windows XP and a wireless connection at home. The wireless connection works when initially I switch on the computer. but if I leave it for even 5 minutes, the wireless is gone. Then I have to shut it off and start computer all over again, waiting for 5 minutes. Even if the wireless speed is 48Mbps or better, it gives the message "Renewing IP address" and gets stuck there not moving to the next stage. Other laptop in the household works fine and can be left on. Why does this happen ? I suspect that IP address is the problem and somehow is not registered in all the necessary files.

    Read the article

  • How to get Google Desktop to index searchable pdf's

    - by user4941
    I've got a scanner that converts documents to pdfs. The pdf that gets produced is searchable. However when google desktop indexes the file it doesn't appear to be indexing any of the contents of the pdf (although it is indexing the content of other pdfs on the computer). I believe Google Desktop only indexes pdfs that are searchable and don't have images. Have others found a good way around this problem? I'm trying to get my household and office paperless, and I'd like to just scan in documents and rely on Google Desktop to find stuff.

    Read the article

  • Windows refuses to believe printer is online unless I delete and re-add it

    - by Marcin
    I have a Canon MP560. It is online, in the sense that (a) I can connect to its internal web server; and (b) if I delete the printer in windows (windows 7), and reinstall it, windows will recognise that the printer is online, and talk to it. In all other cases, the windows and mac computers (purchased last week, running whatever is the latest and greatest mac os) in my household will simply not recognise that the printer is online. The printer is statically configured to use the same IP address, so that's not an issue. Because the printer works just fine with windows after delete and re-add, I assume that the issue with the mac is that I haven't installed whatever drivers Macs need to talk to Canon printers over a network.

    Read the article

  • Server 2012 R2 DNS Conditional forwarding not working reliably, possible caching issue?

    - by Matt
    I have a bit of a home lab setup with a domain controller that is acting as the DNS server for my network. For everything, it's working fine and forwards external DNS requests to my ISP. The household recently wanted to get Netflix going and it seemed a DNS option was better than a VPN to get around the region locking, so I signed up for unblock-us.com Since I have a Windows DNS server I thought I'd be clever and make use of conditional forwarders and added the Netflix domain to the list. Initially this worked well and all devices on the network could now access Netflix, however after about an hour going to the Netflix site would result in a page cannot be found. Doing an nslookup of Netflix.com from my PC resulted in it not returning any IP addresses. As a test, I deleted the Netflix domain from the DNS servers cache and things started working again - devices could get to the site again however the same thing happens again after around half an hour to an hour. Have I missed something here that's causing it to stop working?

    Read the article

  • How to disable internet access at night on the router?

    - by izb
    I have an internet connection that I'd like to be enabled only during the day. With multiple household internet devices, this would need to be something disabled at the level of the router. I don't believe the router offers this sort of functionality, but I'm reasonably familiar with setting up web servers and the like, and I'm wondering if I can set up some sort of proxy server on the internet that the router must go through and have that proxy only active at certain times of day. It's a bit vague I know, but is something like this even possible? If not, are there other solutions to the problem?

    Read the article

  • The Other "C" in CRM

    - by Brian Dayton
    Folks who know me know that I rarely, if ever, talk politics. And I never talk politicians. Having grown up in a household with one parent leaning left and the other leaning to the right it was the best way to keep the peace. This isn't about politics. It's about "constituents" and the need to improve the services and service levels for people--at the city, county, state/province, etc. level all the way up to national governments. As a citizen and tax payer it's also important to me that these services be provided at a reasonable cost. If there's a better and more efficient way to do something then it's my hope that a public sector organization takes advantage of technology the same way private sector companies do. Social services organizations have a complex job. They provide the services that people need, from healthcare and children's assistance to helping people find jobs. But many of these organizations are still managing these processes manually or outdated, home-grown applications that could have been written up to 30 years ago. A lot has changed in technology. On the (this is as political as I'm going to get) political front, stakeholders like you and me are expecting greater transparency on where and how funds are spent. I'll admit that most of the time, when I think about CRM systems, I think about my experience as a customer of my bank, utilities company or cable operator. But now that I'm older, have children and a house--I find myself interacting more and more with agencies and services organizations. My experiences are sometimes good and sometimes not so good. Along those lines, last week's announcement of Siebel CRM 8.2 for Public Sector caught my eye. You may not work in the public sector, but you are a constituent of some--actually a lot--of public sector organizations. I don't know which CRM systems city and county utilize but I'm going to start paying closer attention.

    Read the article

  • links for 2010-03-31

    - by Bob Rhubart
    Andy Mulholland: Rethinking the narrow and deep expertise model "We increasingly realise that we have to read requirements in a more open way to decide what techniques can be used, what business experience can be added, etc, so the whole idea of encouraging ‘cross’ discipline understanding seems to look increasingly necessary as we look at how technology touches every part of business, and/or any other aspect of life. It is time to rethink the narrow and deep expertise model and consider T-shaped approaches where the depth is complimented by the width to understand how it might be used and how it fits with other capabilities and disciplines too." -- Andy Mulholland (tags: enterprisearchitecture) @vambenepe: Smoothing a discrete world "For the short term (until we sell one) there are three cars in my household. A manual transmission, an automatic and a CVT (continuous variable transmission). This makes me uniquely qualified to write about Cloud Computing." -- William Vambenepe (tags: otn oracle cloud) @fteter: The Price of Progress "I wonder about the price of progress on the business world. Do some of us get attached to old business models or software applications? Do we resist change for the better for emotional reasons? Are we sometimes impediments to progress just because we don't want things to change?" -- Oracle ACE Director Floyd Teter (tags: otn oracle oracleace progress innovation) Pat Shepherd: Enterprise Architecture should not be Arbitrary "If done properly the Business, Application and Information architectures are nailed down BEFORE any technological direction (SOA or otherwise) is set. Those 3 layers and Governance (people and processes), IMHO, are layers that should not vary much as they have everything to do with understanding the business -- from which technological conclusions can later be drawn." - Pat Shepherd, responding to a post by Jordan Braunstein. (tags: oracle otn enterprisearchitecture soa)

    Read the article

  • The Other "C" in CRM

    - by [email protected]
    By Brian Dayton on April 5, 2010 7:04 PM Folks who know me know that I rarely, if ever, talk politics. And I never talk politicians. Having grown up in a household with one parent leaning left and the other leaning to the right it was the best way to keep the peace. This isn't about politics. It's about "constituents" and the need to improve the services and service levels for people--at the city, county, state/province, etc. level all the way up to national governments. As a citizen and tax payer it's also important to me that these services be provided at a reasonable cost. If there's a better and more efficient way to do something then it's my hope that a public sector organization takes advantage of technology the same way private sector companies do. Social services organizations have a complex job. They provide the services that people need, from healthcare and children's assistance to helping people find jobs. But many of these organizations are still managing these processes manually or outdated, home-grown applications that could have been written up to 30 years ago. A lot has changed in technology. On the (this is as political as I'm going to get) political front, stakeholders like you and me are expecting greater transparency on where and how funds are spent. I'll admit that most of the time, when I think about CRM systems, I think about my experience as a customer of my bank, utilities company or cable operator. But now that I'm older, have children and a house--I find myself interacting more and more with agencies and services organizations. My experiences are sometimes good and sometimes not so good. Along those lines, last week's announcement of Siebel CRM 8.2 for Public Sector caught my eye. You may not work in the public sector, but you are a constituent of some--actually a lot--of public sector organizations. I don't know which CRM systems city and county utilize but I'm going to start paying closer attention.

    Read the article

  • FULL LIST Difference Edubuntu over Ubuntu

    - by Richard Kemp
    I have always used Edubuntu rather than Ubuntu because I have many children including home educated ones who casually use the education offerings. I appreciate many but not all of the extra offerings. I never got beyond 8.04.4 LTS, so am considering updating. I note now with Edubuntu 12.04 it is 2GB i.e.4 times bigger, even apparently using squashfs. I do now have to consider whether the extra resources are worth it in each computer in my household. I am sick of reading over and over again 'Edubuntu is Unbuntu with extras such as blah blah', and in a different place the same thing but with a different blah blah. I downloaded Edubuntu 12.04 and ran it 'live'. Can't say I got on at all with the Unity Interface (this can be changed when installed), but the apparent education stuff seemed quite small and pathetic, I am obviously not finding it. Is there anywhere a FULL LIST of what Edubuntu has pre-installed has over Ubuntu, so a sensible decision can be made whether to go for it, or just add packages that look relevant to me to Ubuntu. Is there truly no other difference between Unbuntu/Edubuntu but the extra educational packages? (I for example have no school server, but if I understood exactly what is involved, with the number of computers in the house, it may be worth creating one!) Please advise. Thank You.

    Read the article

  • Solution for lightweight LAN peer discovering?

    - by DevilWithin
    I built a library for purely cross-platform programming. My games made with it run fine in Android , Pc, Linux, Mac etc. The networking capabilities are provided by ENET library, therefore all communication between my apps is not TCP or UDP compatible, but only in the custom protocol, even tough its based on the UDP ultimately. I don't think its possible to do what i want with ENET, thats why I ask here for help! Lets say I have the same game running in my Android phone, my laptop and my pc. They are all in the same wifi network, and therefore in a LAN, whether its Wifi hotspot(?) or the household router. I need each of those 3 peers to discover the other two in the network. This is meant only to find the IP of alive apps in the LAN network, to be able to host multiplayer games between them. I can only think of one effective way to do this, UDP broadcast, wait responses, but if that is the solution, i need something small, since its the only purpose of the implementation. Other way could be to try to connect to all IPs in the LAN address subrange, but I don't think the OS would be with me on this one :p Sorry for the long question!

    Read the article

  • How do I 'see' an external USB drive connected directly to my Broadband Router?

    - by The Cougar Kid
    This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

    Read the article

  • Can't connect to Wireless

    - by SimplyRed37
    Good day all! I hope you are doing good. I have performed a WUBI installation of 12.04 on my HP G62 laptop, which has an Atheros AR9285 wireless chipset. Everything works fine with my wired network connection. However, wireless is unable to connect to my wifi network. I enter the WPA2 key and then it attemps to connect, but eventually comes back, asking for the WPA2 key again, as if it was not good. All of the other laptops in the household are able to connect, using the same key (I configured them all, so I am 500% sure of the WPA2 key). Any idea as to what could be causing this? I can definitely post the output of CLI commands like "rfkill list" or "sudo lshw -class network", or "ifconfig". I have installed Ubuntu a few time but I am definitely still a newbie, but I am definitely computer savyy. Looking forward to suggestions . Thanks in advance !!! Dan...

    Read the article

  • a bugging query

    - by Sachindra
    i need to get a query where the elements are displayed in case the first letter is E (the word is electronics).. i have tried with the following : mysql_query("select * from nested_category where name like '[A-F]%'");

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • How I Work: Staying Productive Whilst Traveling

    - by BuckWoody
    I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

    Read the article

  • fetch only first row from oracle - is it faster?

    - by john
    My main goal with this question is optimization and faster run time. After doing lot of processing in the Stored Proc I finally return a count like below: OPEN cv_1 FOR SELECT COUNT(*) num_of_members FROM HOUSEHOLD_MEMBER a, HOUSEHOLD b WHERE RTRIM(LTRIM(a.mbr_last_name)) LIKE v_MBR_LAST_NAME || '%' AND a.number = '01' AND a.code = v_CODE AND a.ssn_head = v_SSN_HEAD AND TO_CHAR( a.mbr_dob, 'MM/DD/YYYY') = v_DOB; But in my code that is calling the SP does not need the actual count. It just cares that count is greater than 1. Question: How can I change this to return just 1 or 0. 1 when count is 0 and 0 when count 1. Will it be faster to do this rather than returning the whole count?

    Read the article

  • Which mediacenter appliance

    - by Guillaume
    I'm looking to buy a mediacenter appliance, but I am a bit lost by all the offers on the market. Here are the features I am looking for : at least 500Go HDD capable of playing HD (1080p) supporting a good range of video and audio codecs support for subtitles including a DVB-T input (coax) and tuner composite video input 5.1 (or 7.1) analog audio output LAN (100M or Gigabit) fileserver (SMB or NFS) remote control possibly digital output (S/PDIF, TOSLINK, or other) no need for integrated DVD player no need for wifi The Ultio Pro looks nice (http://www.thinkgeek.com/electronics/home-entertainment/d3fe). It just lacks a DVB-T input which is a show killer for me. Thanks for your suggestions.

    Read the article

  • How to sniff for wireless MAC addresses in area - My laptop got stolen

    - by Mr AJL
    A few days ago my apartment got broken in, and they took all the electronics, including my $1500 laptop. We are pretty sure it's an inside job (as in someone from the same building), so I believe that the stuff is in someones apartment. Is there any tool that tells you what wireless adapters are active within range? I have my laptops MAC address, so I could use that to find out who stole it. I think it's worth a shot. Any help is appreciated thanks!

    Read the article

  • Recently "exposed" to Clicksor

    - by I take Drukqs
    Previous information concerning my issue can be found here: Virus...? Tons of people talking. Not sure where else to ask. I heard the loud sounds and whatnot from one of the ads but nothing was harmed and other than having the life scared out of me nothing was immediately affected. Literally nothing has changed. I really don't know what to do. My PC seems fine and from what Malwarebytes and Spybot tells me none of my files have been infected with anything. If you need more information I will be glad to supply it. Thanks in advance. Malwarebytes quick and full scan: Clean. Spybot S&D scan: Clean. HijackThis log: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 5:23:33 PM, on 2/2/2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe C:\Program Files (x86)\Pidgin\pidgin.exe C:\Program Files (x86)\Steam\Steam.exe C:\Program Files (x86)\Mozilla Firefox\firefox.exe C:\Program Files (x86)\uTorrent\uTorrent.exe C:\Fraps\fraps.exe C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe C:\Program Files (x86)\Trend Micro\HiJackThis\HiJackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = R3 - URLSearchHook: SearchHook Class - {BC86E1AB-EDA5-4059-938F-CE307B0C6F0A} - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\AddressBarSearch.dll F2 - REG:system.ini: UserInit=userinit.exe O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Windows Live ID Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [BCU] "C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe" O4 - HKLM\..\Run: [JMB36X IDE Setup] C:\Windows\RaidTool\xInsIDE.exe O4 - HKLM\..\Run: [NUSB3MON] "C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe" O4 - HKLM\..\Run: [ISUSScheduler] "C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe" -start O4 - HKLM\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files (x86)\Adobe\Reader 10.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\RunOnce: [Malwarebytes' Anti-Malware] C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe /install /silent O4 - HKCU\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AppleChargerSrv - Unknown owner - C:\Windows\system32\AppleChargerSrv.exe (file missing) O23 - Service: Browser Configuration Utility Service (BCUService) - DeviceVM, Inc. - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCUService.exe O23 - Service: DES2 Service for Energy Saving. (DES2 Service) - Unknown owner - C:\Program Files (x86)\GIGABYTE\EnergySaver2\des2svr.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files (x86)\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe O23 - Service: JMB36X - Unknown owner - C:\Windows\SysWOW64\XSrvSetup.exe O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: NVIDIA Driver Helper Service (NVSvc) - Unknown owner - C:\Windows\system32\nvvsvc.exe (file missing) O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: NVIDIA Stereoscopic 3D Driver Service (Stereo Service) - NVIDIA Corporation - C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%SystemRoot%\system32\Wat\WatUX.exe,-601 (WatAdminSvc) - Unknown owner - C:\Windows\system32\Wat\WatAdminSvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 7889 bytes

    Read the article

  • Windows unrecoverable error wouldn't come out of Hibernate

    - by JohnB
    Out of curiosity... I was in a rush: I put my laptop into Hibernate (I don't keep a battery in it btw) Leaned it against a box in the laundry room Smooth tile floor means bottom of laptop slide out and laptop feel flat against floor, not super hard, but it wasn't carpeting so.. Next time I booted my laptop, I received this error for the first time ever: (not an exact quote) Windows experienced an unrecoverable error and cannot come out of Hibernate. Windows is restarting now After that, my laptop seemed to operate flawlessly. What do you think happened? Jared the electronics? I'm guessing an error like this would result of some sort of hard drive trauma, but fortunately, I have discovered none so far. I scheduled Error-checking for next restart.

    Read the article

  • Is there a rule of thumb for RAM upgrades?

    - by Retrosaur
    I'm having a hard time figuring out whether or not a certain laptop/computer's RAM can be upgraded or not. Is there a rule of thumb that determines how much max RAM one could add to a system without looking it up via external websites? A little bit of a background information: I work in computer sales at a computer electronics store, so it is virtually impossible for me to install any sort of software that would detect computer specs, and I get a lot of customers who wonder what laptop/desktop RAM upgrades usually are. Is there a certain rule that adding more RAM entails? Does it make a difference if it's a 32-bit or 64-bit machine? OS?

    Read the article

  • What power cord does a WD16001032 hard drive use?

    - by llcf
    I have a Western Digital 160GB My Book USB external hard drive (WD16001032), but I can't find its power cord (or, at least, figure out which one it is in my box of cords). It might be that only one power cord would fit, but I'm a bit cautious since I just tried one of the cords with a router and could smell electronics burning when I used an incorrect one. What voltage/amps are needed for this drive? I can't find specs on Western Digital's site. I'm assuming this is due to it being an older drive.

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >