Search Results

Search found 246 results on 10 pages for 'nicholas quirk'.

Page 9/10 | < Previous Page | 5 6 7 8 9 10  | Next Page >

• Windows 7 Sharing issue on RAID 5 Array(s)

  - by K.A.I.N

  Greetings all, I'm having a very odd error with a windows 7 ultimate x64 system. The network system setup is as follows: 2x XP Pro 32 Bit machines 1x Vista ultimate x64 machine 2x Windows 7 x64 Ultimate machines all chained into 1x 16 port netgear prosafe gigabit switch, the windows 7 & vista machines are duplexed. Also there is a router (netgear Rangemax) chained off the switch I am basically using one of the windows 7 machines to host storage & stream media to other machines. To this end i have put 2x 3tb hardware RAID 5 arrays in it and assorted other spare disks which i have shared the roots of. The unusual problems start when i am getting Access denied, Please contact administrator for permission blah blah blah when trying to access both of the RAID 5 arrays but not the other stand alones. I have checked the permission settings, i have added everyone to the read permission for the root, i have tried moving things into sub directories then sharing them. I have tried various setting combinations in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa and always the same. I have tried flushing caches all round, disabling and re-enabling shares & sharing after restart as well as several other things & the result is always the same... No problem on individual drives but access denied on both the RAID arrays from both XP & Vista & Windows 7 machines. One interesting quirk that may lead to an answer is that there is no "offline status" information regarding the folders when you select the RAID 5s from a windows 7 machine yet there is on the normal drives which say they are online. It is as if the raid is present but turned off or spun down but as far as i was aware windows will spin an array back up on network request and on the machine itself the drives seem to be online and can be accessed. Have to admit this has me stumped. Any suggestions anyone? Thanks in advance for any fellow geek assistance. K.A.I.N

  Read the article

• Building a Mafia&hellip;TechFest Style

  - by David Hoerster

  It’s been a few months since I last blogged (not that I blog much to begin with), but things have been busy.  We all have a lot going on in our lives, but I’ve had one item that has taken up a surprising amount of time – Pittsburgh TechFest 2012.  After the event, I went through some minutes of the first meetings for TechFest, and I started to think about how it all came together.  I think what inspired me the most about TechFest was how people from various technical communities were able to come together and build and promote a common event.  As a result, I wanted to blog about this to show that people from different communities can work together to build something that benefits all communities.  (Hopefully I've got all my facts straight.)  TechFest started as an idea Eric Kepes and myself had when we were planning our next Pittsburgh Code Camp, probably in the summer of 2011.  Our Spring 2011 Code Camp was a little different because we had a great infusion of some folks from the Pittsburgh Agile group (especially with a few speakers from LeanDog).  The line-up was great, but we felt our audience wasn’t as broad as it should have been.  We thought it would be great to somehow attract other user groups around town and have a big, polyglot conference. We started contacting leaders from Pittsburgh’s various user groups.  Eric and I split up the ones that we knew about, and we just started making contacts.  Most of the people we started contacting never heard of us, nor we them.  But we all had one thing in common – we ran user groups who’s primary goal is educating our members to make them better at what they do. Amazingly, and I say this because I wasn’t sure what to expect, we started getting some interest from the various leaders.  One leader, Greg Akins, is, in my opinion, Pittsburgh’s poster boy for the polyglot programmer.  He’s helped us in the past with .NET Code Camps, is a Java developer (and leader in Pittsburgh’s Java User Group), works with Ruby and I’m sure a handful of other languages.  He helped make some e-introductions to other user group leaders, and the whole thing just started to snowball. Once we realized we had enough interest with the user group leaders, we decided to not have a Fall Code Camp and instead focus on this new entity. Flash-forward to October of 2011.  I set up a meeting, with the help of Jeremy Jarrell (Pittsburgh Agile leader) to hold a meeting with the leaders of many of Pittsburgh technical user groups.  We had representatives from 12 technical user groups (Python, JavaScript, Clojure, Ruby, PittAgile, jQuery, PHP, Perl, SQL, .NET, Java and PowerShell) – 14 people.  We likened it to a scene from a Godfather movie where the heads of all the families come together to make some deal.  As a result, the name “TechFest Mafia” was born and kind of stuck. Over the next 7 months or so, we had our starts and stops.  There were moments where I thought this event would not happen either because we wouldn’t have the right mix of topics (was I off there!), or enough people register (OK, I was wrong there, too!) or find an appropriate venue (hmm…wrong there, too) or find enough sponsors to help support the event (wow…not doing so well).  Overall, everything fell into place with a lot of hard work from Eric, Jen, Greg, Jeremy, Sean, Nicholas, Gina and probably a few others that I’m forgetting.  We also had a bit of luck, too.  But in the end, the passion that we had to put together an event that was really about making ourselves better at what we do really paid off. I’ve never been more excited about a project coming together than I have been with Pittsburgh TechFest 2012.  From the moment the first person arrived at the event to the final minutes of my closing remarks (where I almost lost my voice – I ended up being diagnosed with bronchitis the next day!), it was an awesome event.  I’m glad to have been part of bringing something like this to Pittsburgh…and I’m looking forward to Pittsburgh TechFest 2013.  See you there!

  Read the article

• St. Louis ALT.NET

  - by Brian Schroer

  I’m a huge fan of the St. Louis .NET User Group and a regular attendee of their meetings, but always wished there was a local group that discussed more advanced .NET topics. (That’s not a criticism of the group - I appreciate that they want to server developers with a broad range of skill levels). That’s why I was thrilled when Nicholas Cloud started a St. Louis ALT.NET group in 2010. Here’s the “about us” statement from the group’s web site: The ALT.NET community is a loosely coupled, highly cohesive group of like-minded individuals who believe that the best developers do not align themselves with platforms and languages, but with principles and ideas. In 2007, David Laribee created the term "ALT.NET" to explain this "alternative" view of the Microsoft development universe--a view that challenged the "Microsoft-only" approach to software development. He distilled his thoughts into four key developer characteristics which form the basis of the ALT.NET philosophy: You're the type of developer who uses what works while keeping an eye out for a better way. You reach outside the mainstream to adopt the best of any community: Open Source, Agile, Java, Ruby, etc. You're not content with the status quo. Things can always be better expressed, more elegant and simple, more mutable, higher quality, etc. You know tools are great, but they only take you so far. It's the principles and knowledge that really matter. The best tools are those that embed the knowledge and encourage the principles (e.g. Resharper.) The St. Louis ALT.NET meetup group is a place where .NET developers can learn, share, and critique approaches to software development on the .NET stack. We cater to the highest common denominator, not the lowest, and want to help all St. Louis .NET developers achieve a superior level of software craftsmanship. I don’t see a lot of ALT.NET talk in blogs these days. The movement was harmed early on by the negative attitudes of some of its early leaders, including jerk moves like the Entity Framework “vote of no confidence”, but I do see occasional mentions of local groups like the St. Louis one. I think ALT.NET has been successful at bringing some of its ideas into the .NET world, including heavily influencing ASP.NET MVC and raising the general level of software craftsmanship for developers working on the Microsoft stack. The ideas and ideals live on, they’re just not branded as “this is ALT.NET!” In the past 18 months, St. Louis ALT.NET meetups have discussed topics like: NHibernate F# and other functional languages AOP CoffeeScript “How Ruby Is Making Me a Stronger C# Developer” Using rake for builds CQRS .NET dynamic programming micro web frameworks – Nancy & Jessica Git ALT.NET doesn’t mean (to me, anyway) “alternatives to .NET”, but “alternatives for .NET”. We look at how things are done in Ruby and other languages/platforms, but always with the idea “What can I learn from this to take back to my “day job” with .NET?”. Meetings are held at 7PM on the fourth Wednesday of each month at the offices of Professional Employment Group. PEG is located at 999 Executive Parkway (Suite 100 – lower level) in Creve Coeur (South of Olive off of Mason Road - Here's a map). Food is not supplied (sorry if you’re a big fan of the Papa John’s Crust-Lovers’ Pizza that’s a staple of user group meetings), but attendees are encouraged to come early and bring/share beer, so that’s cool. Thanks to Nick for organizing, and to Professional Employment Group for lending their offices. Please visit the meetup site for more information.

  Read the article

• A more elegant way of embedding a SOAP security header in Silverlight 4

  - by Your DisplayName here!

  The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

  Read the article

• Top-Rated JavaScript Blogs

  - by Andreas Grech

  I am currently trying to find some blogs that talk (almost solely) on the JavaScript Language, and this is due to the fact that most of the time, bloggers with real life experience at work or at home development can explain more clearly and concisely certain quirks and hidden features than most 'Official Language Specifications' Below find a list of blogs that are JavaScript based (will update the list as more answers flow in): DHTML Kitchen, by Garrett Smith Robert's Talk, by Robert Nyman EJohn, by John Resig (of jQuery) Crockford's JavaScript Page, by Douglas Crockford Dean.edwards.name, by Dean Edwards Ajaxian, by various (@Martin) The JavaScript Weblog, by various SitePoint's JavaScript and CSS Page, by various AjaxBlog, by various Eric Lippert's Blog, by Eric Lippert (talks about JScript and JScript.Net) Web Bug Track, by various (@scunliffe) The Strange Zen Of JavaScript , by Scott Andrew Alex Russell (of Dojo) (@Eran Galperin) Ariel Flesler (@Eran Galperin) Nihilogic, by Jacob Seidelin (@llimllib) Peter's Blog, by Peter Michaux (@Borgar) Flagrant Badassery, by Steve Levithan (@Borgar) ./with Imagination, by Dustin Diaz (@Borgar) HedgerWow (@Borgar) Dreaming in Javascript, by Nosredna spudly.shuoink.com, by Stephen Sorensen Yahoo! User Interface Blog, by various (@Borgar) remy sharp's b:log, by Remy Sharp (@Borgar) JScript Blog, by the JScript Team (@Borgar) Dmitry Baranovskiy’s Web Log, by Dmitry Baranovskiy James Padolsey's Blog (@Kenny Eliasson) Perfection Kills; Exploring JavaScript by example, by Juriy Zaytsev DailyJS (@Ric) NCZOnline (@Kenny Eliasson), by Nicholas C. Zakas Which top-rated blogs am I currently missing from the above list, that you think should be imperative to any JavaScript developer to read (and follow) concurrently?

  Read the article

• Ajax heavy JS apps using excessive amounts of memory over time.

  - by Shane Reustle

  I seem to have some pretty large memory leaks in an app that I am working on. The app itself is not very complex. Every 15 seconds, the page requests approx 40kb of JSON from the server, and draws a table on the page using it. It is cheaper to draw the table over because the data is usually always new. I am attaching a few events to the table, approx 5 per line, 30 lines in the table. I used jQuery's .html() method to put the new html into the container and overwrite the existing. I do this specifically so that jQuery's special cleanup functions go in and attempt to detach all events on the elements in the element that it is overwriting. I then also delete the large variables of html once they are sent to the DOM using delete my_var. I have checked for circular references and attached events that are never cleared a few times, but never REALLY dug into it. I was wondering if someone could give me a few pointers on how to optimize a very heavy app like this. I just picked up "High Performance Javascript" by Nicholas Zakas, but didn't have much time to get into it yet. To give an idea on how much memory this is using, after 4~ hours, it is using about 420,000k on chrome, and much more on Firefox or IE. Thanks!

  Read the article

• Use Your Favorite Wallpapers in Windows 7 Starter Edition

  - by Asian Angel

  If you have Windows 7 Starter Edition installed on your netbook, the default wallpaper can get old. If you are tired of looking at the default wallpaper, then join us today as we look at changing it with Oceanis Change Background Windows 7. Special Notes This information is quoted directly from the website and needs to be kept in mind when using Oceanis Change Background Windows 7: If the Oceanis Change Background Windows 7 program no longer works properly after installing some Windows Updates, then uninstall and reinstall the Oceanis Change Background Windows 7 program to have it run properly again. If you ever do an in-place upgrade to another higher level edition of Windows 7 in the future, then be sure to uninstall this Oceanis Change Background Windows 7 program first to avoid incompatibility issues with it in the new edition of Windows 7. It was designed to only work in Windows 7 Starter edition. Before There it is…the default wallpaper everyone with the Starter Edition gets stuck with. Some people may not mind it, but if you are one of the people who really wants something different then get ready to rejoice. After The install file for Oceanis is contained in a zip file so you will need to unzip it to get started. The install process is quick and simple but you will need to do a system restart afterwards. Once you have restarted your computer this is what your screen will look like…do not panic and think that this is all there is to it. This is just the Starter Screen and can be easily changed… Note: Oceanis will auto-start with Windows each time. Using either the Desktop Icon or the Start Menu Entry, open up the Oceanis Main Window. You will see the set of four default wallpapers shown here. At this point the best thing to do is browse for the appropriate folder where you have all of those wonderful new wallpapers just waiting to be used. Note: We found Stretch to be the best Picture Position setting on our system. For our example we had three ready and waiting. We decided to try out the Wallpaper Slideshow feature first. We chose a time frame and saved our changes. Here are our three wallpapers as they switched through. This can be much more interesting than the default wallpaper. There was only one quirk that we encountered while using the Slideshow Setting. On occasion if we minimized a non-maximized window there would be a leftover partial image in place of the window. Our suggestion? Go with one wallpaper at a time and the settings shown below. These are the settings that we had terrific luck with…Only one picture selected, Picture Position = Stretch, & Change Picture Every = Every Day. Using these settings, the Starter Edition acted just like any of the other editions with regard to wallpaper management. Conclusion If you have grown tired of looking at the default wallpaper in Windows 7 Starter Edition then you will certainly appreciate what Oceanis Change Background Windows 7 can do to fix that problem. For more ways to customize your Windows 7 Started Edition, be sure to to check out how to personalize Windows 7 Starter. Links Download Oceanis Change Background Windows 7 Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Awesome Desktop Wallpapers: The Windows 7 EditionHow To Customize Wallpaper in Windows 7 Starter EditionDesktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs Tomorrow is Mother’s Day

  Read the article

• SQL Saturday 27 (Portland, Oregon)

  - by BuckWoody

  I’m sitting in the Seattle airport, waiting for my flight to Silicon Valley California for the SQL Server 2008 R2 Launch Event. By some quirk of nature, they are asking me to Emcee the event – but that’s another post entirely.   I’m reflecting on the SQL Saturday 27 event that was just held in Portland, Oregon this last Saturday. These are not Microsoft-sponsored events – it’s truly the community at work. Think of a big user-group meeting – I mean REALLY big – held in a central location, like at a college (as ours was) or some larger, inexpensive venue like that. Everyone there is volunteering – it’s my own money and time to drive several hours to a hotel for the night, feed myself and present. It’s their own time and money for the folks that organize the event – unless a vendor or two steps in to help. It’s their own time and money for the attendees to drive a long way, spend the night and their Saturday to listen to the speakers. Why do all this?   Because everybody benefits. Every speaker learns something new, meets new people, and reaches a new audience. Every volunteer does the same. And the attendees? Well, it’s pretty obvious what they get. A 7Am to 10PM extravaganza of knowledge from every corner of the product. In fact, this year the Portland group hooked up with the CodeCamp folks and held a combined event. We had over 850 people, and I had everyone from data professionals to developers in my sessions.   So I’ll take this opportunity to do two things: to say “thank you” to all of the folks who attended, from those who spoke to those who worked and those who came to listen, and to challenge you to attend the next SQL Saturday anywhere near you. You can find the list here: http://www.sqlsaturday.com/. Don’t see anything in your area? Start one! The PASS folks have a package that will show you how. Sure, it’s a big job, but the key is to get as many people helping you as possible. Even if you have only a few dozen folks show up the first time, no worries. The first events I presented at had about 20 in the room. But not this week.   See you at the Launch Event if you’re near the San Francisco area tomorrow, and see you at the Redmond SQL Saturday and TechEd if not.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• XNA RenderTarget2D Sample

  - by Michael B. McLaughlin

  I remember being scared of render targets when I first started with XNA. They seemed like weird magic and I didn’t understand them at all. There’s nothing to be frightened of, though, and they are pretty easy to learn how to use. The first thing you need to know is that when you’re drawing in XNA, you aren’t actually drawing to the screen. Instead you’re drawing to this thing called the “back buffer”. Internally, XNA maintains two sections of graphics memory. Each one is exactly the same size as the other and has all the same properties (such as surface format, whether there’s a depth buffer and/or a stencil buffer, and so on). XNA flips between these two sections of memory every update-draw cycle. So while you are drawing to one, it’s busy drawing the other one on the screen. Then the current update-draw cycle ends, it flips, and the section you were just drawing to gets drawn to the screen while the one that was being drawn to the screen before is now the one you’ll be drawing on. This is what’s meant by “double buffering”. If you drew directly to the screen, the player would see all of those draws taking place as they happened and that would look odd and not very good at all. Those two sections of graphics memory are render targets. All a render target is, is a section of graphics memory to which things can be drawn. In addition to the two that XNA maintains automatically, you can also create and set your own using RenderTarget2D and GraphicsDevice.SetRenderTarget. Using render targets lets you do all sorts of neat post-processing effects (like bloom) to make your game look cooler. It also just lets you do things like motion blur and lets you create mirrors in 3D games. There are quite a lot of things that render targets let you do. To go along with this post, I wrote up a simple sample for how to create and use a RenderTarget2D. It’s available under the terms of the Microsoft Public License and is available for download on my website here: http://www.bobtacoindustries.com/developers/utils/RenderTarget2DSample.zip . Other than the ‘using’ statements, every line is commented in detail so that it should (hopefully) be easy to follow along with and understand. If you have any questions, leave a comment here or drop me a line on Twitter. One last note. While creating the sample I came across an interesting quirk. If you start by creating a Windows Game, and then make a copy for Windows Phone 7, the drop-down that lets you choose between drawing to a WP7 device and the WP7 emulator stays grayed-out. To resolve this, you need to right click on the Windows Phone 7 version in the Solution Explorer, and choose “Set as StartUp Project”. The bar will then become active, letting you change the target you which to deploy to. If you want another version to be the one that starts up when you press F5 to start debugging, just go and right-click on that version and choose “Set as StartUp Project” for it once you’ve set the WP7 target (device or emulator) that you want.

  Read the article

• SQL Saturday 27 (Portland, Oregon)

  - by BuckWoody

  I’m sitting in the Seattle airport, waiting for my flight to Silicon Valley California for the SQL Server 2008 R2 Launch Event. By some quirk of nature, they are asking me to Emcee the event – but that’s another post entirely.   I’m reflecting on the SQL Saturday 27 event that was just held in Portland, Oregon this last Saturday. These are not Microsoft-sponsored events – it’s truly the community at work. Think of a big user-group meeting – I mean REALLY big – held in a central location, like at a college (as ours was) or some larger, inexpensive venue like that. Everyone there is volunteering – it’s my own money and time to drive several hours to a hotel for the night, feed myself and present. It’s their own time and money for the folks that organize the event – unless a vendor or two steps in to help. It’s their own time and money for the attendees to drive a long way, spend the night and their Saturday to listen to the speakers. Why do all this?   Because everybody benefits. Every speaker learns something new, meets new people, and reaches a new audience. Every volunteer does the same. And the attendees? Well, it’s pretty obvious what they get. A 7Am to 10PM extravaganza of knowledge from every corner of the product. In fact, this year the Portland group hooked up with the CodeCamp folks and held a combined event. We had over 850 people, and I had everyone from data professionals to developers in my sessions.   So I’ll take this opportunity to do two things: to say “thank you” to all of the folks who attended, from those who spoke to those who worked and those who came to listen, and to challenge you to attend the next SQL Saturday anywhere near you. You can find the list here: http://www.sqlsaturday.com/. Don’t see anything in your area? Start one! The PASS folks have a package that will show you how. Sure, it’s a big job, but the key is to get as many people helping you as possible. Even if you have only a few dozen folks show up the first time, no worries. The first events I presented at had about 20 in the room. But not this week.   See you at the Launch Event if you’re near the San Francisco area tomorrow, and see you at the Redmond SQL Saturday and TechEd if not.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• QWebView not loading external resources

  - by Nick

  Hi. I'm working on a kiosk web browser using Qt and PyQt4. QWebView seems to work quite well except for one quirk. If a URL fails to load for any reason, I want to redirect the user to a custom error page. I've done this using the loadFinished() signal to check the result, and change the URL to the custom page if necessary using QWebView.load(). However, any page I attempt to load here fails to pull in external resources like CSS or images. Using QWebView.load() to set the initial page at startup seems to work fine, and clicking any link on the custom error page will result in the destination page loading fine. It's just the error page that doesn't work. I'm really not sure where to go next. I've included the source for an app that will replicate the problem below. It takes a URL as a command line argument - a valid URL will display correctly, a bad URL (eg. DNS resolution fails) will redirect to Google, but with the logo missing. import sys from PyQt4 import QtGui, QtCore, QtWebKit class MyWebView(QtWebKit.QWebView): def __init__(self, parent=None): QtWebKit.QWebView.__init__(self, parent) self.resize(800, 600) self.load(QtCore.QUrl(sys.argv[1])) self.connect(self, QtCore.SIGNAL('loadFinished(bool)'), self.checkLoadResult) def checkLoadResult(self, result): if (result == False): self.load(QtCore.QUrl('http://google.com')) app = QtGui.QApplication(sys.argv) main = MyWebView() main.show() sys.exit(app.exec_()) If anyone could offer some advice it would be greatly appreciated.

  Read the article

• Passing a NSArray between classes

  - by Althane

  So, my second question based off of this application I'm teaching myself Objective C with. I have a Data Source class, which for now looks mostly like: - (id) init { if (self = [super init]){ listNames = [[NSArray alloc] initWithObjects: @"Grocery", @"Wedding", @"History class",@"CS Class",@"Robotics",@"Nuclear Sciences", @"Video",@"Library",@"Funeral", nil]; NSLog(@"%@",listNames); } return self; } The .h looks as follows: @interface MainViewDataSource : NSObject { NSArray *listNames; } @property (nonatomic, retain) NSArray *listNames; -(NSArray *)getListNames; So that's where I make it. Now the problem is that when I try to get the array listNames, it returns nothing. The following piece: NSArray* data = [listData listNames]; Is supposed to put the information in listNames in data, but... isn't. Since I'm rather used to JAva, I'm betting this is an Objective C quirk that I don't know how to fix. Which is why I'd be here asking for help. What's the proper way to pass around NSArrays like this?

  Read the article

• AVAudioPlayer making noise when playing multiple sounds at the same time

  - by Rob

  I am having an issue where AVAudioPlayer is introducing noise into playback ONLY when I play multiple sound files at the same time. If I play them each individually, they all sound perfect. But, if I play sound clip B while sound clip A is still playing, the speakers start crackling like there is noise. I have tried both m4a files AND caf files and both make the same noise, so it has to be something with how I am implementing this method or a quirk with AVAudioPlayer. Any insights? code I am using: UITouch* touch = [[event allTouches] anyObject]; NSString* filename = [soundArray objectAtIndex:[touch view].tag]; NSString *path = [[NSBundle mainBundle] pathForResource:filename ofType:@"m4a"]; AVAudioPlayer * newAudio=[[AVAudioPlayer alloc] initWithContentsOfURL:[NSURL fileURLWithPath:path] error:NULL]; self.theAudio = newAudio; // automatically retain audio and dealloc old file if new m4a file is loaded [newAudio release]; // release the audio safely theAudio.delegate = self; [theAudio prepareToPlay]; [theAudio setNumberOfLoops:0]; [theAudio setVolume: volumeLevel]; [theAudio play];

  Read the article

• jQuery AJAX call not working in Webkit

  - by Brian

  I've run into a strange issue with Webkit based browsers (both Safari and Chrome - I'm testing on a Mac) and I am not sure what is causing it. Here's a small script I've created that replicates the issue: <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript" language="javascript"> function doRequest() { document.test.submit(); $.ajax({ type: "GET", cache: false, url: 'ajax.php?tmp=1', success: doSuccess }); } function doSuccess(t_data,t_status,req) { alert('Data is: '+ t_data +', XMLHTTPRequest status is: '+ req.status); } </script> </head> <body> <form name="test" method="post" action="ajax.html" enctype="multipart/form-data"> <input type="file" name="file_1"> <br><input type="button" value="upload" onclick="doRequest();"> </form> </body> </html> ajax.php is: <?php echo $_REQUEST['tmp']; ?> This works as is on Firefox, but the XMLHTTPRequest status is always "0" on both Safari and Chrome. If I remove this line: document.test.submit(); then it works, but of course the form is not submitted. I've tried changing the form submit button from "button" to "submit", but that also prevents it from working on Safari or Chrome. What I am trying to accomplish is: submit the form call another script to get status on the file being uploaded via the form (it's for a small upload progress meter). Any help is really appreciated - I'm hopeful it is just a quirk I'm not familiar with. Thanks! Brian

  Read the article

• RubyGems installation errors both when using 'sudo' and not using sudo

  - by Kenny Peng

  I have a machine that is running Ubuntu Hardy, which provides its own RubyGems package. Unfortunately that version of RubyGems (1.1.1) is too old to do anything useful with, so I decided to manually update RubyGems to the current version (1.3.6). That part went smoothly, and if I do gem -v, I get 1.3.6 which is expected. The problem is when I try to do: sudo gem install rack, it returns this error: ERROR: While executing gem ... (Errno::EACCES) Permission denied - /home/username/.gem Usually when I install gems as root, it knows to install it into /usr/lib/ruby/gems, so why is it checking my home directory at all? Another quirk is when I do gem install rack (not as root), it says: ERROR: While executing gem ... (Gem::FilePermissionError) You don't have write permissions into the /usr/lib/ruby/gems/1.8 directory. which is where I want it to go. I've already tried clearing source_caches, trying different versions of RubyGems (1.3.5), forcing installation into /usr/lib with -i to no avail. Any ideas on why RubyGems is so insistent on checking my /home directory when installing as root?

  Read the article

• C# BackgroundWorker skips DoWork and goes straight to RunWorkerCompleted

  - by mr_man

  I'm new with C# so go easy on me! So far - I have a console app that listens for client connections and replies to the client accordingly. I also have a WPF form with a button and a text box. The button launches some code to connect to the server as a BackgroundWorker, which then waits for a response before appending it to the end of the text box. This works great, once. Sometimes twice. But then it kept crashing - turns out that the DoWork block wasn't being called at all and it was going straight to RunWorkerCompleted. Of course, the .result is blank so trying to convert it to a string fails. Is this a rookie mistake? I have tried searching the internet for various ways of saying the above but haven't come across anything useful... This is the code so far: http://pastebin.com/ZQvCFqxN - there are so many debug outputs from me trying to figure out exactly what went wrong. This is the result of the debug outputs: http://pastebin.com/V412mppX Any help much appreciated. Thanks! EDIT: The relevant code post-fix (thanks to Patrick Quirk below) is: public void dorequest(string query) { request = new BackgroundWorker(); request.WorkerSupportsCancellation = true; request.WorkerReportsProgress = true; request.ProgressChanged += request_ProgressChanged; request.DoWork += request_DoWork; request.RunWorkerCompleted += request_RunWorkerCompleted; request.RunWorkerAsync(query); }

  Read the article

• RubyGems installation errors when using 'sudo' or not

  - by Kenny Peng

  I have a machine that is running Ubuntu Hardy, which provides its own RubyGems package. Unfortunately that version of RubyGems (1.1.1) is too old to do anything useful with, so I decided to manually update RubyGems to the current version (1.3.6). That part went smoothly, and if I do gem -v, I get 1.3.6 which is expected. The problem is when I try to do: sudo gem install rack, it returns this error: ERROR: While executing gem ... (Errno::EACCES) Permission denied - /home/username/.gem Usually when I install gems as root, it knows to install it into /usr/lib/ruby/gems, so why is it checking my home directory at all? Another quirk is when I do gem install rack (not as root), it says: ERROR: While executing gem ... (Gem::FilePermissionError) You don't have write permissions into the /usr/lib/ruby/gems/1.8 directory. which is where I want it to go. I've already tried clearing source_caches, trying different versions of RubyGems (1.3.5), forcing installation into /usr/lib with -i to no avail. Any ideas on why RubyGems is so insistent on checking my /home directory when installing as root?

  Read the article

• How to force ADO.Net to use only the System.String DataType in the readers TableSchema.

  - by Keith Sirmons

  Howdy, I am using an OleDbConnection to query an Excel 2007 Spreadsheet. I want force the OleDbDataReader to use only string as the column datatype. The system is looking at the first 8 rows of data and inferring the data type to be Double. The problem is that on row 9 I have a string in that column and the OleDbDataReader is returning a Null value since it could not be cast to a Double. I have used these connection strings: Provider=Microsoft.ACE.OLEDB.12.0;Data Source="ExcelFile.xlsx";Persist Security Info=False;Extended Properties="Excel 12.0;IMEX=1;HDR=No" Provider=Microsoft.Jet.OLEDB.4.0;Data Source="ExcelFile.xlsx";Persist Security Info=False;Extended Properties="Excel 8.0;HDR=No;IMEX=1" Looking at the reader.GetSchemaTable().Rows[7].ItemArray[5], it's dataType is Double. Row 7 in this schema correlates with the specific column in Excel I am having issues with. ItemArray[5] is its DataType column Is it possible to create a custom TableSchema for the reader so when accessing the ExcelFiles, I can treat all cells as text instead of letting the system attempt to infer the datatype? I found some good info at this page: Tips for reading Excel spreadsheets using ADO.NET The main quirk about the ADO.NET interface is how datatypes are handled. (You'll notice I've been carefully avoiding the question of which datatypes are returned when reading the spreadsheet.) Are you ready for this? ADO.NET scans the first 8 rows of data, and based on that guesses the datatype for each column. Then it attempts to coerce all data from that column to that datatype, returning NULL whenever the coercion fails! Thank you, Keith Here is a reduced version of my code: using (OleDbConnection connection = new OleDbConnection(BuildConnectionString(dataMapper).ToString())) { connection.Open(); using (OleDbCommand cmd = new OleDbCommand()) { cmd.Connection = connection; cmd.CommandText = SELECT * from [Sheet1$]; using (OleDbDataReader reader = cmd.ExecuteReader()) { using (DataTable dataTable = new DataTable("TestTable")) { dataTable.Load(reader); base.SourceDataSet.Tables.Add(dataTable); } } } }

  Read the article

• iPhone OpenGL Splash Screen? How?

  - by Kyle

  My app is based pretty much on the EAGLView in the SDK. It doesn't incorporate a ViewController. Rather it simply inits GL and starts painting immediately.. Currently, my app will load a very small PNG and displays it as quickly as possible. On a 3GS this is rather instant, but on a 3G it can take about 2 seconds. In the latter case of the 3G, the user is looking at a black screen for that time. Is this behavior allowed by Apple? Is there any way to alter this SDK example so that it makes use of 'default.png'? It doesn't seem so straight forward to me. I want my user to see an image as quickly as possible, and I also don't want to be rejected for such a little quirk like this as well. In the guidelines, they encourage you to use default.png for standard applications to show a sort of mockup of the interface while it actually loads. I want to initialize OpenGL, and ALSO display this. This default.png is loaded before the app screen launches. This is EXACLTY what I want to make use of. Any help is appreciated. Thanks!

  Read the article

• why does b'(and sometimes b' ') show up when I split some HTML source[Python]

  - by Oliver

  I'm fairly new to Python and programming in general. I have done a few tutorials and am about 2/3 through a pretty good book. That being said I've been trying to get more comfortable with Python and proggramming by just trying things in the std lib out. that being said I have recently run into a wierd quirk that I'm sure is the result of my own incorrect or un-"pythonic" use of the urllib module(with Python 3.2.2) import urllib.request HTML_source = urllib.request.urlopen(www.somelink.com).read() print(HTML_source) when this bit is run through the active interpreter it returns the HTML source of somelink, however it prefixes it with b' for example b'<HTML>\r\n<HEAD> (etc). . . . if I split the string into a list by whitespace it prefixes every item with the b' I'm not really trying to accomplish something specific just trying to familiarize myself with the std lib. I would like to know why this b' is getting prefixed also bonus -- Is there a better way to get HTML source WITHOUT using a third party module. I know all that jazz about not reinventing the wheel and what not but I'm trying to learn by "building my own tools" Thanks in Advance!

  Read the article

• Cookie not renewing/overwriting in IE

  - by deceze

  I have a weird quirk with cookies in IE. When a user logs into the site, I'm generating a new session id and hence need to overwrite the cookie. The flow is basically: Client goes to https://secure.example.com/users/login page, automatically receiving a session id Client POSTs login credentials to same address Client receives the following headers together with a 302 redirect to https://secure.example.com/users/mypage: CAKEPHP=deleted; expires=Sun, 05-Apr-2009 04:50:35 GMT; path=/ CAKEPHP=98hnIO23...; expires=Mon, 12 Apr 2010 04:50:36 GMT; path=/; secure Client is supposed to visit https://secure.example.com/users/mypage, presenting the new session id. This works in all browsers, except IE (tested in 7 & 8). IE retains the old, unauthenticated session id, and is redirected back to the login page. It works on my local test environment (using a self-signed certificate at https://localhost:8443/...), but not on the live server. I'm using CakePHP and simply issue a $this->Session->renew(), which produces the above cookie headers. Any ideas how to get IE to accept the new cookie?

  Read the article

• emacs: Inferior-mode python-shell appears "lagged"

  - by Begbie00

  Hi all - I'm a Python(3.1.2)/emacs(23.2) newbie teaching myself tkinter using the pythonware tutorial found here. Relevant code is pasted below the question. Question: when I click the Hello button (which should call the say_hi function) why does the inferior python shell (i.e. the one I kicked off with C-c C-c) wait to execute the say_hi print function until I either a) click the Quit button or b) close the root widget down? When I try the same in IDLE, each click of the Hello button produces an immediate print in the IDLE python shell, even before I click Quit or close the root widget. Is there some quirk in the way emacs runs the Python shell (vs. IDLE) that causes this "lagged" behavior? I've noticed similar emacs lags vs. IDLE as I've worked through Project Euler problems, but this is the clearest example I've seen yet. FYI: I use python.el and have a relatively clean init.el... (setq python-python-command "d:/bin/python31/python") is the only line in my init.el. Thanks, Mike === Begin Code=== from tkinter import * class App: def __init__(self,master): frame = Frame(master) frame.pack() self.button = Button(frame, text="QUIT", fg="red", command=frame.quit) self.button.pack(side=LEFT) self.hi_there = Button(frame, text="Hello", command=self.say_hi) self.hi_there.pack(side=LEFT) def say_hi(self): print("hi there, everyone!") root = Tk() app = App(root) root.mainloop()

  Read the article

• Browser dependent problem rendering WMD with Showdown.js?

  - by CMPalmer

  This should be easy (at least no one else seems to be having a similar problem), but I can't see where it is breaking. I'm storing Markdown'ed text in a database that is entered on a page in my app. The text is entered using WMD and the live preview looks correct. On another page, I'm retrieving the markdown text and using Showdown.js to convert it back to HTML client-side for display. Let's say I have this text: The quick **brown** fox jumped over the *lazy* dogs. 1. one 1. two 4. three 17. four I'm using this snippet of Javascript in my jQuery document ready event to convert it: var sd = new Attacklab.showdown.converter(); $(".ClassOfThingsIWantConverted").each(function() { this.innerHTML = sd.makeHtml($(this).html()); } I suspect this is where my problem is, but it almost works. In FireFox, I get what I expected: The quick brown fox jumped over the lazy dogs. one two three four But in IE (7 and 6), I get this: The quick brown fox jumped over the lazy dogs. 1. one 1. two 4. three 17. four So apparently, IE is stripping the breaks in my markdown code and just converting them to spaces. When I do a view source of the original code (prior to the script running), the breaks are there inside the container DIV. What am I doing wrong? UPDATE It is caused by the IE innerHTML/innerText "quirk" and I should have mentioned before that this one on an ASP.Net page using data bound controls - there are obviously a lot of different workarounds otherwise.

  Read the article

• How do virtual destructors work?

  - by Prabhu

  Few hours back I was fiddling with a Memory Leak issue and it turned out that I really got some basic stuff about virtual destructors wrong! Let me put explain my class design. class Base { virtual push_elements() {} }; class Derived:public Base { vector<int> x; public: void push_elements(){ for(int i=0;i <5;i++) x.push_back(i); } }; void main() { Base* b = new Derived(); b->push_elements(); delete b; } The bounds checker tool reported a memory leak in the derived class vector. And I figured out that the destructor is not virtual and the derived class destructor is not called. And it surprisingly got fixed when I made the destructor virtual. Isn't the vector deallocated automatically even if the derived class destructor is not called? Is that a quirk in BoundsChecker tool or is my understanding of virtual destructor wrong?

  Read the article

• Virtual destructor - How does it work?

  - by Prabhu

  Hello All, Few hours back I was fiddling with a Memory Leak issue and it turned out that I really got some basic stuff about virtual destructor wrong!! Let me put explain my class design. class Base { virtual push_elements()<br>{}<br> }; class Derived:public Base { vector<int> x; public: void push_elements(){ for(int i=0;i <5;i++) x.push_back(i); } }; void main() { Base* b = new Derived(); b->push_elements(); delete b; } The bounds checker tool reported a memory leak in the derived class vector. And I figured out that the destructor is not virtual and the derived class destructor is not called.And it surprisingly got fixed when I made the destructor virtual. But my question is "isn't the vector deallocated automatically even if the derived class destructor is not called"? Is that a quirk in BoundsChecker tool or is my understanding of virtual destructor is wrong:)

  Read the article

< Previous Page | 5 6 7 8 9 10  | Next Page >