Search Results

Search found 1657 results on 67 pages for 'synetech inc'.

Page 9/67 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

    - by Synetech
    I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

    Read the article

  • Determining physical location of data on a disc

    - by Synetech
    Does anybody know of a way to find out where, physically on a CD or DVD a given piece of data would be located? I am trying to watch a DVD at the moment, and am about half-way through, but it keeps dying at a specific spot in the film, presumably because of a scratch. I have a repair kit, but I don’t know where to focus my repair because there are several scuffs and scratches on the disc and I have no way of knowing which one is causing the issue. Obviously, cleaning all of them is inadvisable because not only does it waste the consumable materials in the kit, but not all of them are a problem, and by working them, some may become unreadable. Moreover, just because I am half-way through the movie does not mean that it would be half-way from the hub to the edge for several reasons: Discs have more data towards the outer edge than the inner edge (circles are more mathematically complicated than rectangles) The disc is not completely filled up (and even if it were, the movie itself would be be using it all, there are extras and such) Because in this particular case it is a commercial DVD, it is also dual-layer which further complicates manual determination As such, I am trying to find a program that can let me identify a file (or part thereof), cluster, etc. and show me a picture of where on the CD/DVD it would be located. That way, I can look at the disc and fix any scratches that correspond to that distance from the hub. For example, the image below might indicate where on a disc a couple of files or range of clusters would be located, so by looking for anomalies in those areas (rotating as necessary), the correct one can be identified. I’m sure it can be done since at least one form of copy protection (DPM) uses it and DVD-lab Pro includes a “DVD Topology” feature to do this.

    Read the article

  • Is there a way to adjust colors of a specific window?

    - by Synetech
    Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

    Read the article

  • Network speeds being report as 4x higher than actual in Windows 7 SP1

    - by Synetech
    Ever since installing Windows 7 SP1, I have noticed that all programs that display my network transfer rate have been exactly 4x higher than they actually are. For example, when I download something from a high-bandwidth web site or through torrents with lots of sources, the download rate indicated is is ~5MBps (~40Mbps) even though my Internet connection has a maximum of only 1.5MBps (12Mbps). It is the same situation with the upstream bandwidth: the connection maximum is 64KBps, but I’m seeing up to 256KBps. I have tried several different programs for monitoring bandwidth throughput and they all give the same results. I also tried different times and different days, and they always show the rate as being four times too high. My initial thought was that my ISP had increased the speeds (without my noticing), which they have done before. However, I checked my ISP’s site and they have not increased the speeds. Moreover, when I look at the speeds in the program actually doing the transfer (eg Chrome, µTorrent, etc.), the numbers are in line with the expected values at the same time that bandwidth monitoring programs are showing the high numbers. The only significant change (and pretty much the only change at all) that has occurred to my system since the change was the installation of SP1 for Windows 7. As such, it is my belief that some sort of change exists in SP1 whereby software that accesses the bandwidth via a specific API receives (erroneously?) high numbers while others that have access to the raw data continue to receive the correct values. I booted into Windows XP and downloaded some things via HTTP and torrent and in both cases, the numbers were as expected (like they were in Windows 7 before installing SP1). I then booted back into 7SP1 and once again, the numbers were four times higher than possible. Therefore it is definitely something in SP1 that has changed how local bandwidth is calculated/returned. There is definitely something wonky with Windows 7 SP1’s network speed calculation. I tried Googling this, but (for multiple reasons), have had a difficult time finding anything relevant. Has anybody else noticed this behavior? Does anybody know of any bugs or changes in SP1 that could account for it?

    Read the article

  • Does Windows 8 Need New, Specialized Drivers?

    - by Synetech
    It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

    Read the article

  • Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

    - by Synetech
    I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

    Read the article

  • Escaping %’s in file-/folder-names at the command-line

    - by Synetech
    Does anybody of a way to access files and directories that have a % in their name (which is valid) from the command-line? Specifically, if there are two %’s and the text between them happens to correspond to an environment variable. For example, if there is a file called C:\blah\%temp%.txt or a folder called C:\Program Files\%temp%\, none of the following will work because the variable gets expanded: > dir "c:\blah\%temp%.txt" > dir "c:\blah\^%temp^%.txt" > dir "c:\blah\%%temp%%.txt" > dir "c:\blah\\%temp\%.txt" > dir "c:\program files\%temp%" > dir "c:\program files\^%temp^%" > dir "c:\program files\%%temp%%" > dir "c:\program files\\%temp\%" Using wildcards will work, but does not uniquely select the file/folder and may include others: > dir "c:\blah\?temp?.txt"        (also shows ztempz.temp, 1tempa.txt, etc.) > dir "c:\program files\?temp?"   (likewise) (This is frustrating because every now and then—usually when Explorer is restarted for whatever reason—the environment variables stop expanding and some places where they are used end up creating files or directories with the environment variable in it. For example, because I configured Chromium to store its cache in a subdirectory of %temp%, if the variable expands, it is fine, but when it doesn’t, Chromium creates a directory called %temp% under its own directory and stores the cache—which can get large—there. I want to add a line to my temp-/junk-file cleaning script to automatically delete that folder if it exists, but I cannot figure out how to access it from the command-line without resorting to wildcards.)

    Read the article

  • configuring local W3C validator on xampp - windows xp sp3

    - by Gabriel
    Hi I have no experience on perl. I am trying to configure the W3C validator on my localhost (win32). I have already followed all the instructions given by W3C @http://validator.w3.org/docs/install_win.html, but I am getting the following error: Can't locate loadable object for module Encode::HanExtra in @INC (@INC contains: C:/xampp/perl/lib C:/xampp/perl/site/lib .) at C:/xampp/validator-0.8.6/httpd/cgi-bin/check line 49 Compilation failed in require at C:/xampp/validator-0.8.6/httpd/cgi-bin/check line 49. BEGIN failed--compilation aborted at C:/xampp/validator-0.8.6/httpd/cgi-bin/check line 49. I'm running perl 5.10.1 on xampp and the following HandExtra Module http://cpansearch.perl.org/src/AUDREYT/Encode-HanExtra-0.23/lib/Encode/HanExtra.pm This is C:/xampp/validator-0.8.6/httpd/cgi-bin/check line 49 : use Encode::HanExtra qw(); # for some chinese character encodings if I document that line using # I get a similar message related to other object: Can't locate loadable object for module Sub::Name in @INC (@INC contains: C:/xampp/perl/lib C:/xampp/perl/site/lib .) at C:/xampp/perl/site/lib/Moose.pm line 12 This is Line 12 at Moose.pm : use Sub::Name 'subname'; I don't know how to proceed. I will appreciate any advise. Thanks

    Read the article

  • Creating nodes porgramatically in Drupal 6

    - by John
    Hey, I have been searching for how to create nodes in Drupal 6. I found some entries here on stackoverflow, but the questions seemed to either be for older versions or the solutions did not work for me. Ok, so here is my current process for trying to create $node = new stdClass(); $node->title = "test title"; $node->body = "test body"; $node->type= "story"; $node->created = time(); $node->changed = $node->created; $node->status = 1; $node->promote = 1; $node->sticky = 0; $node->format = 1; $node->uid = 1; node_save( $node ); When I execute this code, the node is created, but when I got the administration page, it throws the following errors: warning: Invalid argument supplied for foreach() in C:\wamp\www\steelylib\includes\menu.inc on line 258. warning: Invalid argument supplied for foreach() in C:\wamp\www\steelylib\includes\menu.inc on line 258. user warning: Duplicate entry '36' for key 1 query: INSERT INTO node_comment_statistics (nid, last_comment_timestamp, last_comment_name, last_comment_uid, comment_count) VALUES (36, 1269980590, NULL, 1, 0) in C:\wamp\www\steelylib\sites\all\modules\nodecomment\nodecomment.module on line 409. warning: Invalid argument supplied for foreach() in C:\wamp\www\steelylib\includes\menu.inc on line 258. warning: Invalid argument supplied for foreach() in C:\wamp\www\steelylib\includes\menu.inc on line 258. I've looked at different tutorials, and all seem to follow the same process. I'm not sure what I am doing wrong. I am using Drupal 6.15. When I roll back the database (to right before I made the changes) the errors are gone. Any help is appreciated!

    Read the article

  • Visual C++ Assembly link library troubles

    - by Sanarothe
    Hi. I'm having a problem having my projects built in VC++ Express 2008... I'm using a library, irvine32.inc/lib. INCLUDE Irvine32.inc works for me at school (On already configured VS environments) by default, but at home (Windows 7 x64) I'm having a boatload of issues. My original post here was that a file that irvine32.inc referenced, in the same folder, 'could not be opened.' Added irvine folder to the include path for specific project, progress. Then I was getting an error with mt.exe, but a suggestion on the MSDN suggested turn off antivirus, and now project does build but when I run a program that does NOT reference anything in irvine32, it tells me repeatedly that my project has triggered a breakpoint, and allows me to continue or break. Continue just pops the same window, break loads another popup telling me that "No symbols are loaded for any call stack frame. Source code cannot be displayed." This popup lets me view the disassembly. I tested it with and without working statements, it just throws the same breakpoint on the first line of code. Now, if I run the program when it DOES require something from the include file, in this case, DumpRegs: INCLUDE Irvine32.inc .data .code main PROC mov ebx,1000h mov eax,1000h add eax,ebx call DumpRegs main ENDP END main This gives me 1main.obj : error LNK2019: unresolved external symbol _DumpRegs@0 referenced in function _main@0 1C:\Users\Cameron\csis165\Lab8_CCarroll\Debug\Lab8_CCarroll.exe : fatal error LNK1120: 1 unresolved externals This does NOT happen when I build a project from the book author's examples, which has the same include statement. I'm baffled. :(

    Read the article

  • function taking in an input image and different kernel size

    - by drifterOcean19
    I have this filtering function that takes an input image, performs convolution using a given kernel, and returns the resulting image. However, I can't seem to work it out how to make it takes different kernel sizes.For example instead of pre-defined 3x3 kernel as below in the code, it could instead take 5x5 or 7x7. and then the user could input the type of kernel/filter they want(Depending on the intended effect). I can't seem to put my head around it. i'm quite new to matlab. function [newImg] = kernelFunc(imgB) img=imread(imgB); figure,imshow(img); img2=zeros(size(img)+2); newImg=zeros(size(img)); for rgb=1:3 for x=1:size(img,1) for y=1:size(img,2) img2(x+1,y+1,rgb)=img(x,y,rgb); end end end for rgb=1:3 for i= 1:size(img2,1)-2 for j=1:size(img2,2)-2 window=zeros(9,1); inc=1; for x=1:3 for y=1:3 window(inc)=img2(i+x-1,j+y-1,rgb); inc=inc+1; end end kernel=[1;2;1;2;4;2;1;2;1]/16; med=window.*kernel; disp(med); med=sum(med); med=floor(med); newImg(i,j,rgb)=med; end end end newImg=uint8(newImg); figure,imshow(newImg); end

    Read the article

  • Rails database relationships

    - by Danny McClelland
    Hi Everyone, I have three models that I want to interact with each other. Kase, Person and and Company. I have (I think) setup the relationships correctly: class Kase < ActiveRecord::Base #HAS ONE COMPANY has_one :company #HAS MANY PERSONS has_many :persons class Person < ActiveRecord::Base belongs_to :company class Company < ActiveRecord::Base has_many :persons def to_s; companyname; end I have put the select field on the create new Kase view, and the create new Person view as follows: <li>Company<span><%= f.select :company_id, Company.all %> </span></li> All of the above successfully shows a drop down menu dynamically populated with the company names within Companies. What I am trying to do is display the contact of the Company record within the kase and person show.html.erb. For example, If I have a company called "Acme, Inc." and create a new Kase called "Random Case" and choose within the create new case page "Acme, Inc." from the companies drop down menu. I would then want to display "Acme, Inc" along with "Acme, Inc. Mobile" etc. on the "Random Case" show.html.erb. I hope this makes sense to somebody! Thanks, Danny

    Read the article

  • PHP checking/refreashing functions

    - by user1284360
    ok i have a main document that displays a chatbox, what i want is for the chatbox to refreash on everyone who is logged in's screen whenever someone posts a new message... ive tried many methods including sleep timers and new functions that call then sleep and get recalled but this just generates an endless line of the same or little diffrent data making the form unusable until error... this is my code <?php // set error reporting level if (version_compare(phpversion(), "5.3.0", ">=") == 1) error_reporting(E_ALL & ~E_NOTICE & ~E_DEPRECATED); else error_reporting(E_ALL & ~E_NOTICE); require_once('inc/login.inc.php'); require_once('inc/chat.inc.php'); // initialization of login system and generation code $oSimpleLoginSystem = new SimpleLoginSystem(); $oSimpleChat = new SimpleChat(); // draw login box echo $oSimpleLoginSystem->getLoginBox(); // draw chat application $sChatResult = '<font color="0x99000"> <a href="Register_form.html">New Account</a><br> login to send a message<br> or register for a new account</font>'; if ($_COOKIE['member_name'] && $_COOKIE['member_pass']) { if ($oSimpleLoginSystem->check_login($_COOKIE['member_name'], $_COOKIE['member_pass'])) { $sChatResult = ""; if($oSimpleLoginSystem->check_privledges($_COOKIE['member_name']) >= 2) { $sChatResult .= "<br>privledge check Working<br>"; } $sChatResult .= "<form action=$_SERVER[PHP_SELF] method='post'> <input type='hidden' name='foo' value='<?= $foo ?>' /> <input type='submit' name='submit' value='Refresh Messages' /> </form>"; $sChatResult .= $oSimpleChat->acceptMessages(); $sChatResult .= "<br><br>"; $sChatResult .= $oSimpleChat->getMessages(); } } echo $sChatResult; ?>

    Read the article

  • Trouble recording unique regex output to array in perl

    - by Structure
    The goal of the following code sample is to read the contents of $target and assign all unique regex search results to an array. I have confirmed my regex statement works so I am simplifying that so as not to focus on it. When I execute the script I get a list of all the regex results, however, the results are not unique which leads me to believe that my manipulation of the array or my if (grep{$_ eq $1} @array) { check is causing a problem(s). #!/usr/bin/env perl $target = "string to search"; $inc = 0; $once = 1; while ($target =~ m/(regex)/g) { #While a regex result is returned if ($once) { #If $once is not equal to zero @array[$inc] = $1; #Set the first regex result equal to @array[0] $once = 0; #Set $once equal to zero so this is not executed more than once } else { if (grep{$_ eq $1 } @array ) { #From the second regex result, check to see if the result is already in the array #If so, do nothing } else { @array[$inc] = $1; #If it is not, then assign the regex search result to the next unused position in the array in any position. $inc++; #Increment to next unused array position. } } } print @array; exit 0;

    Read the article

  • Java RegEx API "Look-behind group does not have an obvious maximum length near index ..."

    - by Foo Inc
    Hello, I'm on to some SQL where clause parsing and designed a working RegEx to find a column outside string literals using "Rad Software Regular Expression Desginer" which is using the .NET API. To make sure the designed RegEx works with Java too, I tested it by using the API of course (1.5 and 1.6). But guess what, it won't work. I got the message "Look-behind group does not have an obvious maximum length near index 28". The string that I'm trying to get parsed is Column_1='test''the''stuff''all''day''long' AND Column_2='000' AND TheVeryColumnIWantToFind = 'Column_1=''test''''the''''stuff''''all''''day''''long'' AND Column_2=''000'' AND TheVeryColumnIWantToFind = '' TheVeryColumnIWantToFind = '' AND (Column_3 is null or Column_3 = ''Not interesting'') AND ''1'' = ''1''' AND (Column_3 is null or Column_3 = 'Still not interesting') AND '1' = '1' As you may have guessed, I tried to create some kind of worst case to ensure the RegEx won't fail on more complicated SQL where clauses. The RegEx itself looks like this (?i:(?<!=\s*'(?:[^']|(?:''))*)((?<=\s*)TheVeryColumnIWantToFind(?=(?:\s+|=)))) I'm not sure if there is a more elegant RegEx (there'll most likely be one), but that's not important right now as it does the trick. To explain the RegEx in a few words: If it finds the column I'm after, it does a negative look-behind to figure out if the column name is used in a string literal. If so, it won't match. If not, it'll match. Back to the question. As I mentioned before, it won't work with Java. What will work and result in what I want? I found out, that Java does not seem to support unlimited look-behinds but still I couldn't get it to work. Isn't it right that a look-behind is always putting a limit up on itself from the search offset to the current search position? So it would result in something like "position - offset"?

    Read the article

  • Access Violation Using memcpy or Assignment to an Array in a Struct

    - by Synetech inc.
    Hi, I wrote a program last night that worked just fine but when I refactored it today to make it more extensible, I ended up with a problem. The original version had a hard-coded array of bytes. After some processing, some bytes were written into the array and then some more processing was done. To avoid hard-coding the pattern, I put the array in a structure so that I could add some related data and create an array of them. However now, I cannot write to the array in the structure. Here’s a pseudo-code example: main() { char pattern[]="\x32\x33\x12\x13\xba\xbb"; PrintData(pattern); pattern[2]='\x65'; PrintData(pattern); } That one works but this one does not: struct ENTRY { char* pattern; int somenum; }; main() { ENTRY Entries[] = { {"\x32\x33\x12\x13\xba\xbb\x9a\xbc", 44} , {"\x12\x34\x56\x78", 555} }; PrintData(Entries[0].pattern); Entries[0].pattern[2]='\x65'; //0xC0000005 exception!!! :( PrintData(Entries[0].pattern); } The second version causes an access violation exception on the assignment. I’m sure it’s because the second version allocates memory differently, but I’m starting to get a headache trying to figure out what’s what or how to get fix this. (I’m currently working around it by dynamically allocating a buffer of the same size as the pattern array, copying the pattern to the new buffer, making the changes to the buffer, using the buffer in the place of the pattern array, and then trying to remember to free the—temporary—buffer.) (Specifically, the original version cast the pattern array—+offset—to a DWORD* and assigned a DWORD constant to it to overwrite the four target bytes. The new version cannot do that since the length of the source is unknown—may not be four bytes—so it uses memcpy instead. I’ve checked and re-checked and have made sure that the pointers to memcpy are correct, but I still get an access violation. I use memcpy instead of str(n)cpy because I am using plain chars (as an array of bytes), not Unicode chars and ignoring the null-terminator. Using an assignment as above causes the same problem.) Any ideas? Thanks a lot.

    Read the article

  • How to Use an Environment Variable as an Environment Variable Name

    - by Synetech inc.
    Hi, In my pursuit of a solution to another environment-variable/batch-file related problem, I have once again come across a problem I have visited before (but cannot for the life of me remember how, or even if I solved it). Say you have two BAT files (or one batch file and the command line). How can one pass an environment variable name to the other so that it can read the variable? The following example does not work: A.BAT: @call b.bat path B.BAT: @echo %%1% > A.BAT > %1 > B.BAT path > %1 It is easy enough to pass the environment variable name, but the callee cannot seem to use it. (I don’t remember if or how I dealt with this the last time it came up, but I suspect it required the less-than-ideal use of redirecting temporary BAT files and calling them and such.) Any ideas? Thanks.

    Read the article

  • How do you set the ZIndex on a TabItem?

    - by CC Inc
    I am wanting my TabItems to be positioned in between a border to achieve a "binder" affect, like this: However, I cannot seem to achieve this affect using ZIndex with my borders and each TabItem item. Currently, I get this result: Using this code: <Border CornerRadius="40,40,0,0" Background="Orange" Margin="8,31,2,21" Grid.RowSpan="4" Panel.ZIndex="-3" ></Border> <Border CornerRadius="40,40,0,0" Background="Red" Margin="6,29,4,23" Grid.RowSpan="4" Panel.ZIndex="-1"></Border> <Border CornerRadius="40,40,0,0" Background="Yellow" Margin="3,26,7,26" Grid.RowSpan="4" Panel.ZIndex="1"></Border> <Border CornerRadius="40,40,0,0" Background="DarkRed" Margin="1,23,9,29" Grid.RowSpan="4" Panel.ZIndex="3"></Border> <Border CornerRadius="40,40,0,0" Background="OrangeRed" Margin="-2,19,12,33" Grid.RowSpan="4" Name="border1" Panel.ZIndex="5"></Border> <TabControl Name="tabControl1" TabStripPlacement="Bottom" Background="Transparent" Margin="-2,32,15,6" Grid.RowSpan="4" BorderThickness="0"> <TabItem Name="tabItem1" Margin="0,0,0,1" Panel.ZIndex="4"> <TabItem.Header> <TextBlock> Main</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem2" Panel.ZIndex="5"> <TabItem.Header> <TextBlock Height="13" Width="91"> Internet Explorer</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem3" Panel.ZIndex="0"> <TabItem.Header> <TextBlock> Firefox</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem4" Panel.ZIndex="-2"> <TabItem.Header> <TextBlock> Chrome</TextBlock> </TabItem.Header> </TabItem> <TabItem Name="tabItem5" Panel.ZIndex="-4"> <TabItem.Header> <TextBlock> Opera</TextBlock> </TabItem.Header> </TabItem> </TabControl> However, this does not achieve the desired affect. How can I do this in WPF? Is TabControl the best choice?

    Read the article

  • Ruby is already using the class name of my model

    - by Octopus Inc
    I'm making a forum application with various levels of authorization, one of which is a Monitor. I am doing this by extending my User class, and I plan on fine tuning this with "-ship" classes (e.g. administratorship, authorship, moderatorship, etc.). Apparently the Monitor class is part of ruby mixin. How do I keep my resource name without the collisions?

    Read the article

  • Passing a Batch File an Argument Containing a Quote Containing a Space

    - by Synetech inc.
    Hi, On many occasions I have dealt with passing batch files arguments with spaces, quotes, percents, and slashes and all sorts of combinations of them. Usually I managed to figure out how to accomplish what I want, but this time I am stuck. I have tried a couple of hundred combinations now and my head is starting to hurt. I’ve reduced the problem quite nicely. It’s a simple requirement: pass a double-quoted space from one batch file to another. That is, one batch file should pass some string X to another so that the the second one echos " ". I just can’t figure out what X should be. Here is a minimal batch file that demonstrates and attempt that does not work. (This BAT file takes the place of both by calling itself.) ::Goal is to print: ::" " ::That is, to pass a quoted space from a BAT file to a BAT file if not (%1)==() goto recurse %0 "" "" :recurse echo %1 pause It does not work. I’ve tried using "\" \"", """ """, """" """", "\"" "\"", ""\" \""", "^" ^"", ^"" "^", and so on. Either they print double double-quotes, lose everything after the space, or something else (that is wrong). Any ideas? Thanks.

    Read the article

  • Wireless Connected But No Internet Connection (Ubuntu 12.04)

    - by Zxy
    I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

    Read the article

  • iSCSI timeouts under high load

    - by Antonio
    I have two servers connected via Gigabit Ethernet. One is iSCSI target, the second one is initiator. When I run mkfs.ext4 at initiator, after a while disk IO slows down critically. In the target host I can see the following in syslog: Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668c 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668c 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668d 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668d 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668e 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 1196696 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 1196696 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119669e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119669e 6 Sep 14 09:40:04 sh11 tgtd: abort_task_set(1139) found 119669f 0 Sep 14 09:40:04 sh11 tgtd: abort_cmd(1115) found 119669f 6 And load average grows to 12 or even more: # uptime 12:37:00 up 23 days, 13:25, 1 user, load average: 12.00, 7.00, 4.00 CentOS 6.3 tgtd 1.0.24 Intel Pentium 4 2.4GHz 1Gb RAM 2Tb WD Cavlar Green SATA 2.0 #lspci 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02) 00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV200 QW [Radeon 7500] 02:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) 02:02.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:03.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:04.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (CNR) Ethernet Controller (rev 82) Is there a way to tune target host to avoid these timeouts?

    Read the article

  • Ubuntu 10.04 not detecting multiple monitors

    - by user28837
    I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks. As per request: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash Build Date: 23 April 2010 05:11:50PM xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen". Using the first device section listed. (**) | |-->Device "Default Device" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x81f0e80 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072 (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so (II) Module glx: vendor="FireGL - ATI Technologies Inc." compiled for 7.5.0, module version = 1.0.0 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "fglrx" (II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 Module class: X.Org Video Driver (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." compiled for 1.7.1, module version = 8.72.11 (II) ATI Proprietary Linux Driver Version Identifier:8.72.11 (II) ATI Proprietary Linux Driver Release Identifier: 8.723.1 (II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29 (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for fglrx (II) Loading PCS database from /etc/ati/amdpcsdb (--) Assigning device section with no busID to primary device (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found (--) Chipset Supported AMD Graphics Processor (0x9442) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found (**) ChipID override: 0x954F (**) Chipset Supported AMD Graphics Processor (0x954F) found (II) AMD Video driver is running on a device belonging to a group targeted for this release (II) AMD Video driver is signed (II) fglrx(0): pEnt->device->identifier=0x9428aa0 (II) pEnt->device->identifier=(nil) (II) fglrx(0): === [atiddxPreInit] === begin (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.6, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (==) fglrx(0): Buffer Tiling is ON (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 10, (OK) ukiOpenByBusid: ukiOpenMinor returns 10 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 11, (OK) ukiOpenByBusid: ukiOpenMinor returns 11 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 (--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442) (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000 (--) fglrx(0): MMIO registers at 0xfe7e0000 (--) fglrx(0): I/O port at 0x0000a000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.1.0 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): VESA BIOS detected (II) fglrx(0): VESA VBE Version 3.0 (II) fglrx(0): VESA VBE Total Mem: 16384 kB (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS (II) fglrx(0): VESA VBE OEM Software Rev: 11.13 (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. (II) fglrx(0): VESA VBE OEM Product: RV770 (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f) (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618) (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 (--) fglrx(0): MMIO registers at 0xfe8e0000 (--) fglrx(0): I/O port at 0x0000b000 (==) fglrx(0): ROM-BIOS at 0x000c0000 (II) fglrx(0): AC Adapter is used (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled (II) fglrx(0): ATI Video BIOS revision 9 or later detected (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2 (II) fglrx(0): PCIE card detected (--) fglrx(0): Using per-process page tables (PPPT) as GART. (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): Using adapter: 1:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): Interrupt handler installed at IRQ 31. (II) fglrx(0): Using adapter: 2:0.0. (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000) (II) fglrx(0): RandR 1.2 support is enabled! (II) fglrx(0): RandR 1.2 rotation support is enabled! (==) fglrx(0): Center Mode is disabled (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Finished Initialize PPLIB! (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2] (II) fglrx(0): Display0 EDID data --------------------------- (II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397 (II) fglrx(0): Year: 2008 Week: 51 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: StandBy Suspend Off (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 (II) fglrx(0): Supported established timings: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported standard timings: (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 (II) fglrx(0): Supported detailed timing: (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 (II) fglrx(0): Serial No: Y183D8CF0TFU (II) fglrx(0): Monitor name: DELL S2409W (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff0010ac38a055465430 (II) fglrx(0): 3312010380351e78eeee91a3544c9926 (II) fglrx(0): 0f5054a54b00714f8180d1c001010101 (II) fglrx(0): 010101010101023a801871382d40582c (II) fglrx(0): 4500132a2100001e000000ff00593138 (II) fglrx(0): 3344384346305446550a000000fc0044 (II) fglrx(0): 454c4c205332343039570a20000000fd (II) fglrx(0): 00324c1e5311000a2020202020200059 (II) fglrx(0): End of Display0 EDID data -------------------- (II) fglrx(0): Output DFP2 has no monitor section (II) fglrx(0): Output DFP_EXTTMDS has no monitor section (II) fglrx(0): Output CRT1 has no monitor section (II) fglrx(0): Output CRT2 has no monitor section (II) fglrx(0): Output DFP2 disconnected (II) fglrx(0): Output DFP_EXTTMDS connected (II) fglrx(0): Output CRT1 disconnected (II) fglrx(0): Output CRT2 disconnected (II) fglrx(0): Using exact sizes for initial modes (II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080 (II) fglrx(0): DPI set to (96, 96) (II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected. (==) fglrx(0): QBS disabled (==) fglrx(0): PseudoColor visuals disabled (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (==) fglrx(0): NoAccel = NO (==) fglrx(0): NoDRI = NO (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): CapabilitiesEx: 0x00000000 (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (--) Depth 24 pixmap format is 32 bpp (II) Loading extension ATIFGLRXDRI (II) fglrx(0): doing swlDriScreenInit (II) fglrx(0): swlDriScreenInit for fglrx driver ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 17, (OK) ukiOpenByBusid: ukiOpenMinor returns 17 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) fglrx(0): [uki] DRM interface version 1.0 (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000 (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000 (II) fglrx(0): [uki] framebuffer handle = 0x3000 (II) fglrx(0): [uki] added 1 reserved context for kernel (II) fglrx(0): swlDriScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.72.11 (II) fglrx(0): Date: Apr 8 2010 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae (II) fglrx(0): Build-Kernel MODVERSIONS: yes (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [uki] register handle = 0x00004000 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000 (II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1920 x 320 (==) fglrx(0): Backing store disabled (II) Loading extension FGLRXEXTENSION (==) fglrx(0): DPMS enabled (II) fglrx(0): Initialized in-driver Xinerama extension (**) fglrx(0): Textured Video is enabled. (II) LoadModule: "glesx" (II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so (II) Module glesx: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension GLESX (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.7.6, module version = 1.2.1 ABI class: X.Org Video Driver, version 6.0 (II) fglrx(0): GLESX enableFlags = 94 (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines Driver provided ScreenToScreenBitBlt replacement Driver provided FillSolidRects replacement (II) fglrx(0): GLESX is enabled (II) LoadModule: "amdxmm" (II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so (II) Module amdxmm: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.0.0 (II) Loading extension AMDXVOPL (II) fglrx(0): UVD2 feature is available (II) fglrx(0): Enable composite support successfully (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [DRI] installation complete (==) fglrx(0): Silken mouse enabled (==) fglrx(0): Using HW cursor of display infrastructure! (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2. (--) RandR disabled (II) Found 2 VGA devices: arbiter wrapping enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE ukiDynamicMajor: found major device number 251 ukiDynamicMajor: found major device number 251 ukiOpenByBusid: Searching for BusID PCI:1:0:0 ukiOpenDevice: node name is /dev/ati/card0 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0 ukiOpenDevice: node name is /dev/ati/card1 ukiOpenDevice: open result is 18, (OK) ukiOpenByBusid: ukiOpenMinor returns 18 ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) fglrx(0): Enable the clock gating! (II) fglrx(0): Setting screen physical size to 507 x 285 (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/udev: Adding input device Power Button (/dev/input/event1) (**) Power Button: Applying InputClass "evdev keyboard catchall" (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.6, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Power Button (/dev/input/event0) (**) Power Button: Applying InputClass "evdev keyboard catchall" (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3) (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB-PS/2 Optical Mouse: always reports core events (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3" (II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons (II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s) (II) Logitech USB-PS/2 Optical Mouse: Found relative axes (II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE) (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes. (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5) (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall" (**) Logitech USB Multimedia Keyboard: always reports core events (**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5" (II) Logitech USB Multimedia Keyboard: Found keys (II) Logitech USB Multimedia Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event6) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event6" (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as keyboard (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/udev: Adding input device KEYBOARD (/dev/input/event7) (**) KEYBOARD: Applying InputClass "evdev keyboard catchall" (**) KEYBOARD: always reports core events (**) KEYBOARD: Device: "/dev/input/event7" (II) KEYBOARD: Found 14 mouse buttons (II) KEYBOARD: Found scroll wheel(s) (II) KEYBOARD: Found relative axes (II) KEYBOARD: Found keys (II) KEYBOARD: Configuring as mouse (II) KEYBOARD: Configuring as keyboard (**) KEYBOARD: YAxisMapping: buttons 4 and 5 (**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (EE) KEYBOARD: failed to initialize for relative axes. (II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2) (II) No input driver/identifier specified (ignoring) (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2) (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall" (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) No input driver/identifier specified (ignoring) (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

    Read the article

  • munin transmission plugin, I get per error

    - by Sandro Dzneladze
    Could you please tell me what this error says?: Can't locate JSON/RPC/Client.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.14.2 /usr/local/share/perl/5.14.2 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.14 /usr/share/perl/5.14 /usr/local/lib/site_perl .) at ./transmission_ line 3. BEGIN failed--compilation aborted at ./transmission_ line 3. This is a perl plugin for munin system monitoring tool. I'm using ubuntu server 12.04

    Read the article

  • include_once error : failed to open stream in Boonex Dolphin v7.0.9

    - by Guillaume Pierre
    first let me say I'm a beginner in PHP, specifically PHP Object-oriented programming. I'm working on a V7.0.9 dolphin version.http://www.boonex.com/dolphin While I'm trying to include a class.php from a 3rd-part developer I work with <?php include_once ('modules/developer/configure/classes/class.php'); I get this error : Warning: include_once(modules/developer/configure/classes/ClassExample.php): failed to open stream: No such file or directory in /var/www/vhosts/mysite.com/httpdocs/dolphin/inc/classes/BxDolPageView.php(612) : eval()'d code on line 2 Warning: include_once(): Failed opening 'modules/developer/configure/classes/ClassExample.php' for inclusion (include_path='.:') in /var/www/vhosts/mysite.com/httpdocs/dolphin/inc/classes/BxDolPageView.php(612) : eval()'d code on line 2 Fatal error: Class 'ClassExample' not found in /var/www/vhosts/mysite.com/httpdocs/dolphin/inc/classes/BxDolPageView.php(612) : eval()'d code on line 6 I'm trying to figure out where is the problem... does it comes from Boonex? or is it linked to my server configuration? I really don't know where to begin to resolve... Thx in advance for your kind help if you get knowledge on it

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >