Search Results

Search found 3844 results on 154 pages for 'detect'.

Page 90/154 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• Use Windows Briefcase from the command line

  - by Daniel

  I have a thumb drive on which I take many of my files with me. I would like to synchronize it with my computer automatically when I connect it. I currently have a script run every time I connect it so that I can do the many things that need to be done when it connects (check for updates to the portable applications, etc.). I want my synchronization utility to: Detect conflicts work correctly when I move files or change the folder structure tell the difference between a file that was deleted on one side and a file that was added on the other work from the command line or at least have a command that will open up a window provide a confirmation screen before doing anything The Windows Briefcase does all of these except the command line. Is there any program that does all of these, or is there a way to synchronize the briefcase from the command line?

  Read the article

• RGB to DVI adapter not working for Projector-to-PC

  - by user897052

  We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

  - by Thomas B.

  I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

  Read the article

• "Play on another device" function not working with Samsung Allshare

  - by Tural Teyyuboglu

  Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

  Read the article

• Bluetooth radio device is not available

  - by Mike

  I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

  Read the article

• install grub on pendrive containing linux installation, making it system independent

  - by arpit

  i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

  Read the article

• Need help. HDD Failed

  - by jiewmeng

  i have a seagate 3.5" 500GB SATA2 HDD that i put in a USB case (vantec) that failed recently. symptoms: at first, it started except that attempts made to browse certain folders resulted in "Data Error (Cyclic Redundancy Check)". then when i tried restarting the hdd, then i got a RAW partition, and windows 7 said i need to format it. i also tried using a desktop to connect to the HDD directly using SATA, windows 7 stuck at "starting windows" for abt half hour b4 i gave up on it. in the BIOS, it seems to detect the HDD model correctly, something like STA3500xxx something like that i also tried using TestDisk as suggested by jaclaz on MSFN and it did not find any partitions what could i do now?

  Read the article

• How to control fan speed on Compaq Presario under Ubuntu?

  - by Josh

  I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensores-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)

  Read the article

• Any worker agent monitors for appliance based load balancers?

  - by Zethris

  Looking to find out to what extent an appliance load balancer can monitor servers for both failover (say for example a service like apache tomcat fails) and load balancing? Right now it looks like it's just port monitoring/connection tracking and healthcheck urls that it will heartbeat and detect as down if it doesn't come back with a finished request. We are looking at the Kemp 3500 or Loadbalancer.org solutions. Is there any sort of web application level monitoring/load balancing that these load balancers can offer that can more directly interact with the servers it's balancing?

  Read the article

• How do companies know they've been hacked?

  - by Chad

  With the news of Google and others getting hacked, I was wondering how companies find out, detect, and/or know they've been hacked in the first place? Sure, if they find a virus/trojan on user's computers or see a very high access rate to parts of their system that don't usually see much, if any, traffic. But, from what I've see in articles, the attack was pretty 'sophisticated', so I wouldn't imagine the hackers would make it so obvious of their hacking in the first place. Maybe someone can enlighten me on current detection schemes/heuristics. Thanks.

  Read the article

• Making fdisk see software RAID 0

  - by unknownthreat

  I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

  Read the article

• if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

  - by EndangeringSpecies

  suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

  Read the article

• Why do partially failed/failing switches fail to pass DHCP?

  - by David Mackintosh

  I've noticed this several times: a switch starts to behave oddly. Usually if the switch doesn't fail outright, what tends to get noticed is that DHCP doesn't work. We had a Linksys SRW-224P fail today. Systems which were still connected worked properly, until it came time to renew their DHCP lease. Once the lease expired, they stopped working, but up until then we couldn't detect a failure. This includes PoE VoIP phones -- they work fine until their lease is up, at which point they're done. I've noticed this on the above-mentioned Linksys, three varieties of 3Com, and possibly half a dozen dumb switches. What is it about DHCP that makes it sensitive to failing switches?

  Read the article

• prevent OS X from prompting disk initialization/formatting

  - by Just-A-User.A-Superuser

  i have TrueCrypt partition, when i insert it in OS X, it always prompt me to initialize the hard disk. is there a way to prevent os x from detecting uninitialize hard disk? [UPDATE] by the way, as Truecrypt suggested while i'm in Windows, i must make partitions so the os won't detect the hard drive as uninitialized. Windows respected that the drive already have contents by the mere fact that it has partitions, while OS X thinks that it is still uninitialized. i think OS X is trying to be smart by detecting if each partition has a valid filesystem id/marker

  Read the article

• Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

  Read the article

• Windows Media Player 11 Not Detecting Autoplaylists

  - by tuna

  Every time I open Windows Media Player it fails to detect my autoplaylists stored in <my music library dir>\Playlists. This appears to lead to sync problems since I (exclusively) use autoplaylists to sync music to my mobile. As WMP 11 fails to find the any sync autoplaylists it infuriatingly seems to decide that I want no music at all on my phone and proceeds to delete all my music off my phone. I guess these are two seperate problems but it seems to me they are related. If anyone can shed any light on a fix, that would be much appreciated. Many thanks

  Read the article

• Dell docking station / Windows 7 not detecting HannsG JC199D via DVI

  - by user27150

  I have a laptop running Win7 that I use with a Dell docking station. I'd used it with XP for a couple years running dual monitors from the docking station, one from the VGA and one from the DVI. After upgrading to Win7, the monitor that's on the DVI out is not detected, using "rigorous detection" or otherwise. I've switched the cables to verify that it's not the monitor at fault-- but I can't find any info on why the monitor wouldn't be detected. I've got the latest and greatest Nvidia drivers installed (at least, as far as Windows update is aware). Leaving the laptop lid partly open does allow Windows to detect the laptop's native screen as well as the VGA monitor, but never the DVI. The monitors are HannsG JC199Ds. Any ideas? Thanks!

  Read the article

• Mysql Master-ColdMaster

  - by enedebe

  I explain my case: I'm at Amazon AWS and I want to be fault tolerant on a entire region failure. My basic problem is to have the db in sync with 2 regions. My options: Master-Master (high lag) Hand made sync every 5 minutes Master-ColdMaster?! (copy on the fly but Master won't wait the other region commit) In my system we could afford loosing a piece of data (we're not a bank) the last inserts in the db, but we could not afford more than 10 minutes of downtime. The database is small and the level of inserts is low, and I wouldn't affect the normal usage waiting other region commit. Is the 3 solution posible? And the most important, once the primary fail how we can detect and change the rol between master-coldmaster -- coldmaster-master ? Is there any clean-mode to restore between failure? Thank's!

  Read the article

• Does this sound like a stack overflow?

  - by Jordan S

  I think I might be having a stack overflow problem or something similar in my embedded firmware code. I am a new programmer and have never dealt with a SO so I'm not sure if that is what's happening or not. The firmware controls a device with a wheel that has magnets evenly spaced around it and the board has a hall effect sensor that senses when magnet is over it. My firmware operates the stepper and also count steps while monitoring the magnet sensor in order to detect if the wheel has stalled. I am using a timer interrupt on my chip (8 bit, 8057 acrh.) to set output ports to control the motor and for the stall detection. The stall detection code looks like this... // Enter ISR // Change the ports to the appropriate value for the next step // ... StallDetector++; // Increment the stall detector if(PosSensor != LastPosMagState) { StallDetector = 0; LastPosMagState = PosSensor; } else { if (PosSensor == ON) { if (StallDetector > (MagnetSize + 10)) { HandleStallEvent(); } } else if (PosSensor == OFF) { if (StallDetector > (GapSize + 10)) { HandleStallEvent(); } } } this code is called every time the ISR is triggered. PosSensor is the magnet sensor. MagnetSize is the number of stepper steps that it takes to get through the magnet field. GapSize is the number of steps between two magnets. So I want to detect if the wheel gets stuck either with the sensor over a magnet or not over a magnet. This works great for a long time but then after a while the first stall event will occur because 'StallDetector (MagnetSize + 10)' but when I look at the value of StallDetector it is always around 220! This doesn't make sense because MagnetSize is always around 35. So the stall event should have been triggered at like 46 but somehow it got all the way up to 220? And I don't set the value of stall detector anywhere else in my code. Do you have any advice on how I can track down the root of this problem? The ISR looks like this void Timer3_ISR(void) interrupt 14 { OperateStepper(); // This is the function shown above TMR3CN &= ~0x80; // Clear Timer3 interrupt flag } HandleStallEvent just sets a few variable back to their default values so that it can attempt another move... #pragma save #pragma nooverlay void HandleStallEvent() { ///* PulseMotor = 0; //Stop the wheel from moving SetMotorPower(0); //Set motor power low MotorSpeed = LOW_SPEED; SetSpeedHz(); ERROR_STATE = 2; DEVICE_IS_HOMED = FALSE; DEVICE_IS_HOMING = FALSE; DEVICE_IS_MOVING = FALSE; HOMING_STATE = 0; MOVING_STATE = 0; CURRENT_POSITION = 0; StallDetector = 0; return; //*/ } #pragma restore

  Read the article

• Including a PHP file that can be used with multiple sites

  - by Roland

  I have a web server that we use, apache, centos5, php I have a file called 'include.php' that I need to include in multiple sites. Eg. I have a site called testsite.co.za, now in the index.php i want to include the include.php file, the include.php is not in the root of testsite.co.za, Now i created another folder includes in the web root directory which contains include.php my code looks as follows in testsite.co.za/index.php require_once '../includes/include.php'; if i run testsite.co.za it can't detect include.php. Is there a certain server setting I need to change in order to include this file? My directory structureof -/var/www/html   -testsite.co.za       -index.php     -includes       -include.php Hope this makes sence

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

  - by Chris C.

  I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

  Read the article

• Getting around the FAT32 4GB file size limit

  - by Aesir

  I recently purchased a 32GB USB 3 stick that was formatted FAT32. I plugged it into my computer and attempted to copy a film onto it, the file was over 4GB however and it would not let me copy the file across because of the 4GB file size limit imposed by FAT32. After some googling I found that I could format my USB stick to have an exFAT format which would mean I could put files onto the stick greater than 4GB in size and the drive would work on both my Mac and my PC. The problem with this solution is that my PS3 cannot detect the USB stick when it is formatted with exFAT. I would like to know if there is a way I can have my USB stick formatted so it can have files greater than 4 GB and work on my PC, Mac and PS3.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >