Search Results

Search found 3556 results on 143 pages for 'scroll paging'.

Page 90/143 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• how to make man page not disappear on exit

  - by Alan

  ...probably a silly question but I could not beat google into telling me the answer so posting here: I got 2 machines - Slackware 13 and Fedora 11. On the slack machine, when I use man I can scroll all the way to the bottom then exit man and the info stays in my terminal window (which I find very convenient as I can read it while typing the command in question, copy-paste the options, etc.). On fedora when I close man the man page info is gone. How can I configure man (or is it the terminal?) to not remove the man page info on exit?

  Read the article

• Installing ethernet drivers with no install package

  - by Josh

  I recently got my new Sony Vaio laptop and formatted it into Windows 7 Ultimate. I would like to use the Windows Easy Transfer Tool over a network connection to transfer some of my files over from my desktop PC. Before I do this though, I need to install the ethernet LAN drivers (I'm currently using the built in Wifi). I downloaded the original LAN driver that came with my Vaio originally from the Sony website: http://support.vaio.sony.eu/computing/vaio/downloads/preinstalled/index.aspx?l=en_GB&m=VPCEB1Z0E_B [Scroll down to the 450KB Ethernet driver] When I unzip the package, these files are inside: yk62x64.cat yk62x64.dll yk62x64.inf yk62x64.sys As you can see, no installer. Can anyone guide me through how to properly install these drivers? I have thought of using Google but I'm clueless as to what query to use. Thanks.

  Read the article

• How to configure/save layout of SQL Server's Log File Viewer?

  - by gernblandston

  When I'm viewing the job history of a particular SQL Agent Job, I typically want to see whether it succeeded, its duration and maybe the duration of the individual steps of the job. When I open the history in the Log File Viewer, I always need to scroll over and shrink the 'Message' column and drag the 'Duration' column over next to the 'Step Name' column. Is there a way to configure the layout of the Log File Viewer (e.g. reposition columns, resize columns) and save it for future sessions? Thanks!

  Read the article

• "Sticky button" configuration under X11/Ubuntu?

  - by John Whitley

  Is there a configuration or app that will enable Sticky-keys like functionality for a pointer button under X11? (On Ubuntu 9.10, FWIW.) To be clear, I'd like a single tap (down/up events) to be treated as a down event, and a following tap to be treated as an up event. Context: I have a trackball with a fourth button that I've mapped to act as horizontal/vertical scroll. This works great. It'd be even better if I didn't have to hold the button down when scrolling.

  Read the article

• Openoffice.org: Mouse wheel one row at a time possible?

  - by Maksee

  I noticed this in Excel, now in OpenOffice.org calc. One small change in mouse wheel leads to 3 rows (line) change. Is it possible to change in Calc OR/AND in Excel? EDIT: Yes, I know about system wide setting about the number of lines for one notch of scroll. But in some applications this setting is interpreted related to size in pixels so scrolling is predictable, but for some like spreadsheet is not. Since the height of line in a cell differ depending of the cell content, with other setting as 1 you will have a guarantee of unpredictable content before your eyes with only one notch.

  Read the article

• Is there a Google Chrome extension or userscript that will "bottom-justify" form fields?

  - by Dennis Williamson

  When using Google Chrome, I would like to have a page scroll up so the bottom of form fields are at or above the bottom of the window when I click in the text input to begin entering something. However, if the form height is larger than the window, the top should not be scrolled off automatically. I want to go from: to: An bonus essential feature would be for the input box to automatically be resized in height (but not width) to fill the window. This feature ideally would be configurable: enable/disable and margin above and below. There should be no scrolling or resizing for one-line input boxes. Is there an extension or userscript that does something like this?

  Read the article

• Graphics Tablet as input device for Windows 8

  - by Arcath

  Having used Windows 8 (and 8.1) on a touch screen I know how much better it is than with a mouse. I've seen people with graphics tables on 7 use them to scroll their browser etc... so I was wondering if I could use one as a touch screen for windows? and if did would the 8 features of swipe in from the sides etc... work properly? Just incase brand is an issue in this I was looking at getting a Wacom.

  Read the article

• language input is changed by itself, not only by keystroke of alt+shift

  - by Berry Tsakala

  I'm using 2 and sometimes more input methods in windows I use ALT + left Shift for switching between languages. Sometimes, every once in a while, another action(s) trigger the language switch. It happens in the same application, (i.e. the input language changes for the same app without my request) or, while switching tasks with Alt-Tab, which causes language input to change in an arbitrary application's context. I realized that some of these actions could be the use of the scroll wheel button. It's super annoying How do I disable any other language switching, and stay only with alt+shift? Why does this happen? It happened to my in the past in these and more occasions: middle mouse click pressing Windows key pression Alt Tab (unknown)

  Read the article

• Reverse bash console text flow

  - by radman

  Hi, This is a bit of a weird question and I'm not sure that there is any easy answer to it but I am very interested in finding a solution. So when I work on a linux machine via a console I find that I am constantly staring at the bottom of the screen, as once you have executed a bunch of commands text fills toward the bottom. Now I find that this is decidedly not good for my neck and it would be far better if instead of scrolling to the bottom, the text would scroll to the top instead. So does anyone out there know if there is a way to reverse the direction text appears in a console? (note that i am aware of the clear command) Example: default behaviour user@machine:~$ command 1 user@machine:~$ command 2 user@machine:~$ command 3 user@machine:~$ __active_prompt__ desired behaviour user@machine:~$ __active_prompt__ user@machine:~$ command 3 user@machine:~$ command 2 user@machine:~$ command 1 Running Kubuntu 10.04 using Konsole I realise this is an odd question, thanks for any help.

  Read the article

• CentOS Live CD Creation issues

  - by Dheeraj

  I am creating my customized CentOS 6.3 Live CD. I am following information given at https://projects.centos.org/trac/livecd/wiki/GetToolset My "livecd-creator" command completes successfully and an ISO image is created. But when I try to boot up my system with this ISO, it goes up to the CentOS blue screen and then the CAPS lock and Scroll Lock LEDs on the keyboard starts flashing. Then from here after, the system takes no input from keyboard and I have to power cycle it and it does the same thing. Could you get me any suggestion why this is causing and possible workaround. Thanks.

  Read the article

• how to prevent log output from PostgreSQL stored procedure ?

  - by ssc

  I am running a number of PostgreSQL scripts that used to produce excessive log output. I managed to reduce most of the output to an acceptable amount by passing --quiet as parameter to the psql command line client and adding SET client_min_messages='warning'; to the beginning of my SQL scripts. This works fine for most basic statements like SELECT, INSERT, UPDATE, etc.) However, when I call a stored function in a script using e.g. SELECT my_func(my_args);, there is still log output similar to my_func (omitted a long with many '-' here because SF thinks that's a headline) (1 row) The output is useless; it only makes me having to scroll back up a long way after the script has run and also makes it much harder than necessary to spot any relevant error output. How can I get rid of it ?

  Read the article

• How do I associate server traffic to a domain hosted on that server?

  - by morley

  I have three or four Linux servers, each of which hosts anywhere from 5 to 50 domains. Each domain has its own folder: /www/projectname/web/ Logs go in: /www/projectname/log However, if there's a traffic spike (or, as I see it on my end, a memory usage spike), I'm not sure how to figure out which domain is responsible for the traffic without running tail -f on each of the projects and making an educated guess based on how fast things scroll. There's got to be a better way! There probably is, but I haven't seen it. And the last time I checked, bandwidth monitors only report system-wide load. So if anyone knows how to do this the right way, please let me know. Thanks!

  Read the article

• Windows XP volume control spontaneously slides to zero

  - by Paul Dixon

  Was listening to a podcast in iTunes at my desk, left my desk briefly and as I sat down, the volume faded. If I scrolled the volume back up, using my keyboard or the volume tray icon, it would smoothly scroll back down again. I rebooted, same thing occurred. Figuring maybe I had a stuck keyboard or hitherto undiscovered mouse function, I unplugged each in turn. Volume still wanted to go to zero! Anyone know what might cause this? It's driving me nuts!

  Read the article

• Why do some PDFs lag in Adobe Acrobat?

  - by Coldblackice

  I have a handful of PDFs open. One of them in particular is extremely laggy, almost to the point of being unreadable. When I scroll through its pages, it's almost like an extreme version of v-sync being turned off. Very choppy. Overall system resources are plentiful, and all of the other PDFs cruise up and down with no stuttering or problems. I've tried closing and reopening the problem PDF to no avail. It's a small PDF, only 3MB in size, with no graphics (only programming code snippets). Surely, it must be some type of problem with the specific PDF (I'll try opening it in another PDF-viewing program, rather than Acrobat X). Possible corruption? Could there be some type of GPU/hardware-acceleration intervening going on? I've never heard of such with PDF-viewing.

  Read the article

• How to convert Kindle books into PDF format?

  - by verve

  I'm new to digital books and I use the Kindle app for Windows to read the books I bought but I hate how I can't read the bottom paragraph of a book in the Kindle app in the centre of the monitor; I have to bend my neck down and it gets sore fast. Problem is that I can't move the Kindle book page up or halfway as when I'm reading a PDF document; if you try to move the page in Kindle it skips to the next new page. So, I thought maybe converting my books to PDF will solve the problem. How do I convert Kindle books into the PDF format? Does anyone have another solution? Perhaps a fancier reader that allows me to scroll Kindle book pages? Windows 7 64-bit IE 8

  Read the article

• How to delete system default printer forms?

  - by matt wilkie

  On Windows there are system default printer forms which can't be deleted from the Print Server Properties dialog. Is there some other way they can be removed? We are never going to use page sizes like Envelope, B5(JIS), US Std Fanfold, etc. and I'd like to save users (and myself!) from having to scroll through a big long list of noise. Our print servers are Windows Server 2003 if that makes any difference. thanks.

  Read the article

• Ubuntu terminal questions

  - by Camran

  I am wondering about my VPS providers ubuntu terminal. Are all these terminals the same? I think they are so user-UN-friendly. I can't copy-paste into the terminal, when I try opening textfiles, I can't scroll up and down easily. I cant save easily. Nothing is easy... Is it always like this with Ubuntu? Is there any way to make it easier? I use windows but I login to my vps provider with login details and then simply click "terminal" to open the terminal. Please help me out here

  Read the article

• Windows7 - Mouse not working, all windows + tray act like inactive

  - by Teo.sk

  I have this problem for two days now. First when it happened, logging out and back in helped, but now this occurs right after booting. I cannot activate any window by clicking into it, and also cannot minimalise, or close it with mouse. In few applications I cannot even interact with them with mouse (e.g. clicking on links in browser). I can scroll an active window with the trackball, and sometimes everything works normally for a little while. Everything works fine, when I use keyboard for this, I can resize, move, close windows with keyboard shortcuts, etc. I ran a complete Avast! scan, but it found nothing important. Also event viewer did not show any relevant errors. Here's a log from HijackThis if it helps anything.

  Read the article

• Disable/configure Back and Forward through mouse wheel in Internet Explorer

  - by Subtwo

  I have a problem with Internet Explorer (version 7 on Windows XP). Sometimes (not always) when you use the mouse wheel to scroll a page up/down it instead chooses to go back or forth in the web browsing history. This behavior is the same as when you hold the shift-key simultaneously using the wheel. My guess is that Internet Explorer somehow gets misled by something and thinks that I'm actually pressing shift. This is in turn maybe an artifact of the fact that this particular session is a remote-desktop session originating from Linux (Ubuntu). Needless to say the problem can be quite irritating and the alternative of completely turning off the wheel functionality doesn't seem like an option as other applications would suffer greatly from this. Anyway back to my question(s): Is it possible to map the shift+wheel to a simple wheel event for Internet Explorer? Is it possible to disable the shift+wheel event for Internet Explorer? Any suggestions are greatly appreciated.

  Read the article

• What are the keyboard shortcuts to operate a Mac slider control

  - by doekman

  In the Safari RSS screen, there is a slider (or range) control to change an article's summary length. By pressing TAB a couple of times, it is possible to navigate to this control, without using the mouse. Is it also possible, to slide the slider with the keyboard? Thus sliding the knob to the right and left? The volume slider in iTunes can be operated by the arrow-keys, but in Safari's RSS window, these are used to scroll the text if there are any scrollbars... Note: in System Preferences, Keyboard (OS X 10.6), Keyboard Shortcuts, I have set Full Keyboard Access to All controls. Otherwise, the TAB key only navigates between text boxes and lists.

  Read the article

• Google Chrome gets really slow on 10+ open tabs

  - by Anton

  For some time already I face a problem with Google Chrome. I really love this browser, but on Windows 7 on a pretty decent machine (i5, 4GB RAM) it gets REALLY slow when I open for instance 10 techcrunch.com pages. Once I do that it becomes virtually difficult to scroll through pages and the general responsiveness of the browser gets down. And if I open 20+ or 30+ tabs there is a good chance all of them will crash. Does anyone got an idea? This happens to me on several PCs with Windows 7 64bit. At 10 tabs there is 600-700MB memory used by Chrome. Two systems have the issue are both laptops with integrated graphics. One by Intel, the other an nVidia GeForce 310M.

  Read the article

• better media player than vlc with a real library [closed]

  - by elluca

  hi i have been using VLC for years. but my library of movies is growing an i would like to have a better management of them. sure, i could use itunes for that. but i really hat quicktime. the UI is even worse than the one windows media player got. i looked at winamp, windows media player and songbird. but none has got a UI comparable to VLC. the most important feature: hotkeys. i want to be able to skip in a video using the mouse scroll wheel. do i have to code one myself? ;) thanks lukas

  Read the article

• Editor that supports renaming tabs for untitled docs?

  - by OverTheRainbow

  I sometimes need to copy/paste text into two windows and compare the contents for a quick hack, ie. without having to save both documents to disk, and display the two docs side-by-side vertically so I can scroll them independantly (WinMerge doesn't seem to support independent scrolling.) Since the documents only live in RAM, text editors will display a non-descript tab/filename like "Untitled1" or "New file 1": http://img171.imageshack.us/img171/1153/sidebysideunleddocs.jpg Does someone know of a Windows editor that supports... renaming tabs with more descriptive names even with documents that haven't been saved to disk, side-by-side, vertical tiling, and independant scrolling? Thank you.

  Read the article

• How to tell Linux to explicitly swap out main memory of a suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >