Search Results

Search found 58734 results on 2350 pages for 'windows batch'.

Page 901/2350 | < Previous Page | 897 898 899 900 901 902 903 904 905 906 907 908  | Next Page >

  • After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

    - by sin
    I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

    Read the article

  • Connect Ralink RT2571 to new PC

    - by tuelsch
    I bought a new PC with the AsRock Z77 Extreme 4m motherboard, since this has no WLAN, I extracted the WLAN card from my old PC, a Ralink RT 2571 WF, an connected it to the new board. I downloaded the driver from http://www.ralinktech.com/en/04_support/support.php?sn=500 (the RT257x USB one) and installed it. In the device manager, an unknown device shows up, but if I tell it to search its driver, it does not find it (searching in the whole C partition). The Ralink Diagnostic Test says that the WLAN Card is disabled. I'm using Windows 7 64bit professional. Can anyone suggest me a solution to get my WLAN running?

    Read the article

  • Accessing VMware Player across the network

    - by Tiffany Walker
    My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

    Read the article

  • Something is spamming from my hMail server - how can I deal with this?

    - by joshcomley
    My Windows 2008 server is attempting to send out a lot of spam, I've just discovered, and I'm not sure how to see where the compromise is. For example: has someone hacked an account? Has someone hacked the server? Is there a virus on the server? What can I do to investigate this? Edit Thanks for the replies so far. I am running hMail server, and have spent so long investigating the correct configuration but still I end up with these emails being sent. Here is a screenshot of my Internet IP range settings on the server: (let me know what else I can provide to help)

    Read the article

  • Google Chrome giving error 138

    - by gsingh2011
    Google Chrome randomly stopped working one day and is giving me this error: Google Chrome is having trouble accessing the network. This may be because your firewall or antivirus software wrongly thinks that Google Chrome is an intruder on your computer and is blocking it from connecting to the Internet. Here are some suggestions: Add Google Chrome as a permitted programme in your firewall or antivirus software's settings. If it is already a permitted programme, try deleting it from the list of permitted programmes and adding it again. Error 138 (net::ERR_NETWORK_ACCESS_DENIED): Unable to access the network. I didn't make any changes to my firewall settings between the time it was working and when it wasn't working. I'm using the default Windows Firewall. I added Chrome to the allowed programs and restarted, but that didn't fix the error. I even reinstalled Chrome completely and that didn't work either. Any help would be appreciated. EDIT: I forgot to mention that Firefox and IE9 work fine.

    Read the article

  • netsh advfirewall firewall

    - by lehn0058
    I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

    Read the article

  • Server 2008 SP1 VSS Writers Not Responding

    - by Jason
    I've got a Windows Server 08 box on SP1 that is having some problems. We've experienced backup problems and I've traced it down to VSS Writers not responding. From the command line, if I type vssadmin list providers, I get Provider name: 'Microsoft Software Shadow Copy provider 1.0' Provider type: System Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5} Version: 1.0.0.7 If I type vssadmin list writers, I get this vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool (C) Copyright 2001-2005 Microsoft Corp. Waiting for responses. These may be delayed if a shadow copy is being prepared. I could wait this out for hours and it won't move. I looked up how Server 2008 handles VSS writers, and you can't reregister them like you could in Server 2003 http://social.technet.microsoft.com/Forums/en/windowsserver2008r2general/thread/062cc52c-899b-45f3-8d0c-798b92363f41 Does anyone know how to fix something like this or where to turn next?

    Read the article

  • running more than one command line commands inside for loop

    - by klijo
    i have a folder containing images and i want to determine its Compression method used. So i would loop through the folder and do a grep Compression like this and note i have installed grep for windows for %f in (*.jpg) do identify -verbose "%f" | grep Compression >> info.txt However i need to write the file name and compression technique used so i modified the above command for %f in (*.jpg) do identify -verbose "%f" | grep Compression & echo "%f" & echo: >> info.txt But the problem is that i get a blank txt file. Could someone pleas help me.

    Read the article

  • How do I make my "volume up" more powerful in Win7?

    - by joon
    My volume up button raises the volume by 1%. Its also not a button, it's a weird 'touch' thing which is really really terrible. If I want to lower the volume, I have to awkwardly rub it for a while. If it were to decrease by 5% or 10% it would be a lot better. Can this be set somewhere in Windows/Keyboard settings? I got close to a solution with Autohotkey, where I could do this: a::Send {Volume_Up 5} which would send the volume up command five times, however when I assign it to the volume key, it forms an endless loop since the Send command sends Volume_Up and parses it at the same time. Update: I ended up with this script: $Volume_Up::VolumeUp() $Volume_Down::VolumeDown() VolumeUp( ) { Send {Volume_Up 6} SoundBeep, 750, 50 } VolumeDown( ) { Send {Volume_Down 6} SoundBeep, 750, 50 }

    Read the article

  • Member of local Administrators group cannot elevate

    - by fixme
    Hi We have just installed the first Windows 7 (professional) workstation in our domain. Its primary user has been added to the local (computer's) Administrators group (computername\Administrators). Still, whenever elevation is needed, his credentials are not accepted, and he is never allowed to act as an administrator. For example, he cannot write a file to C:\ (not that he needs to, but it illustrates the problem). Putting him in the domain's Administrators group doesn't help either (anyway we'd rather not do that). I suspect that he may be the victim of some policy that controls elevation, but can't seem to find it. Can anyone shed some light?

    Read the article

  • Cannot access an application folder in Program files

    - by GiddyUpHorsey
    I recently installed Windows 7 Professional 64bit on a new machine. I installed an application using a ClickOnce installer. The application runs fine, but I cannot access the application folder it created in c:\Program files (x86). It bombs with access denied. I try to view the properties on the folder and it takes about 1 minute to display (other folders take 1 second). It says I cannot view any information because I'm not the owner. It doesn't say who the current owner is (instead - Unable to display current owner.) but says I can take ownership. When I try it fails again with Access Denied, even though I have administrative permissions. Why can't I access this folder nor take ownership?

    Read the article

  • Replace files with symlink

    - by soandos
    This question is intended to be the inverse of Replace Symbolic Links with Files, but for windows. I have started running out of space on my SSD drive, and I found that about 12% of used space is in my installer folder (holds the .msi files for all the programs that I have installed) I am looking for two things: A way to move this (or any) folder via symlink. Ideally, some powershell function that I could use to just designate a folder, a destination, and the symlink would be created in the original (pointing to the destination) In this particular case, a registry change that would allow the location to be move would also be helpful, but I would still prefer solution 1. How can this be done?

    Read the article

  • Audio problems with asus notebook with Bluetooth and usb devices in win 7

    - by QuickSilver
    My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

    Read the article

  • How can I add metadata to NTFS files/folders?

    - by Pwdr
    I want to tag different file types (i.e. .pdf, .epub, .iso, .bin, folders,..) using the same descriptive fields. For example i would like a metadata field "type" which would be "eBook" on pdf- and epub-files, "CD-Image" on iso- and bin-files. I read about Alternate Data Streams (ADS) to make this possible. Does anyone know a good program for Windows 7 to tag different files and search for them? It is important for me, that the metadata is NOT stored in a separate database. I move the files a lot and need to stay flexible (ADSs 'stick' to the files). Any ideas?

    Read the article

  • How can I find out what's uploading traffic to the internet?

    - by Nick G
    Some program I'm running is constantly uploading to the Internet. It's uploaded 300MB in the last few hours. I could reboot and see if it stops, but I'd prefer to find out what it is if possible. I've tried using the resource monitor but it's totally nonsensical - even if I run a broadband speedtest, it barely registers any traffic. Ideally I'd like to find a tool which can tell me the current bandwidth of each application. I think NetLimiter used to work on XP but it's not supported for Windows 7.

    Read the article

  • Logging on to server creates duplicate user profiles in Documents & Setting

    - by Tech
    Windows Server 2003. I am having a problem with the creation of new user profiles when logging in remotely to a terminal server. The new user profile gets added under Documents & Settings as username.domainname. Deleting the new profile does not allow the original profile to be reverted to. Went logging on to the server again, it creates another new user profile. Nothing was changed in the Active Directory or security settings. How do I get the original profile to be used?

    Read the article

  • VirtualBox: Grub sees hard drive, Linux does not

    - by thabubble
    I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

    Read the article

  • Does PCI bus really occupy 1.8GB

    - by Neil
    I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

    Read the article

  • Weird files in User folder

    - by Vervious
    In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

    Read the article

  • L2TP Site to Site VPN issues

    - by Chris Lively
    I have a windows 2008 r2 server that needs to establish a VPN connection to a remote VPN server. We're using the L2TP protocol with a pre-shared key. I initially used the New Demand Dial interface wizard. Then I went into properties on the interface and set the type of VPn to L2TP/IPSec and put the key under the advanced settings. The error I received when attempting to connect is: An error occured during connection of the interface. A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

    Read the article

  • Server Running but unable to log in to it

    - by Funky Si
    I have a Windows Server 2003 server that is running sql server. Users can access the databases running on it fine, but I am unable to log on to it by remote desktop or directly at the machine. I am able to view the event logs remotely and I can't see anything that shouts out as being a problem. What options can people think of for regaining access to this server or finding out more information about the problem? I am able to reinstall the operating system but would like to leave that as a last resort.

    Read the article

  • MySQL returning slow queries with result sets bigger than 30 rows

    - by josephs8
    When ever I run a query that exceeds 30 queries the time for the query to run goes from less than a second to over 10 seconds to get data. Example I run a query to return 29 rows, it takes .1 seconds, I run a query to return 31 rows it takes 11.2 seconds. I am running mySQL on Windows 2008 Server Dual Core 2.6Ghz with 3GB of Memory. The machine doesn't run anything else. It does have a instance of MSSQL running on the server but that does not get used at all. This only happens via PHP right now, If I manually run the query on the server it returns it in less than a second. The queries are not complicated either I have included one below: SELECT Name, Value FROM `bis_co`.`departments` LIMIT 31 What would be causing this issue and how can I correct this? Am I missing a configuration setting in MySQL or something. Thanks

    Read the article

  • SQL Server 2012 Installation Hangs

    - by Rivka
    We have a Windows 8 machine that we installed SQL Server 2005 on first. We then uninstalled it and installed SQL Server 2012 - unsuccessfully. The installation wizard hung at the point where it says: SqlEngineDBStartConfigAction_install_configrc_Cpu64 The event log showed the following error: The SQL Server (MSSQLSERVER) service terminated with the following service-specific error: WARNING: You have until SQL Server (MSSQLSERVER) to logoff. If you have not logged off at this time, your session will be disconnected, and any open files or devices you have open may lose data. We got the same error while trying to start the service. We tried uninstalling and re-installing but faced the same issue. Any help would be appreciated.

    Read the article

  • Window will read this particular DVD which it usually doesn't, if it spins for a longer time

    - by curious_kid
    I'm unable to figure out what's wrong with my system. My computer will read this particular DVD sometimes and mostly it won't. When trying to explore the DVD, I get error "Windows can't access this disc" ( note : It doesn't says that the "disc is empty", the normal error which I generally get when I try to read a scratched DVD ). Ok now the mysterious part, I have noticed that everytime DVD spins for a longer time ( like for 1 -2 minutes), window will read it without any problem. Extra information : The DVD I'm talking about doesn't have any scratches. I tried cleaning the DVD Drive with a lens cleaning CD. DVD was burned in multisessions. My system have window 8 installed. Question I wanted to ask : What makes DVD spins for a longer period of time sometimes ? If possible how can I make window spin the DVD for longer time ? Any solution to my problem ?

    Read the article

  • Exchange 2007 - Distribution group not work correctly

    - by AlexB
    I have simple server Windows 2008 Standart SP2 with Exchange 2007 with apply SP1. Only one DC and one Exchange server (not exist Edge) in the same server. I have first distribution group by name "[email protected]" with 10 users. Working with internal and external mail correctly. I have second distribution group by name "[email protected]" with 3 users. Working with internal mail correctly, but external mail delivery failed 2 from 3 users. Only 1 users proclaims that external mail delivered correctly. Those 3 users they are too member of distribution group [email protected]" . I am not found in the eventlog any problem with Exchange server. Any user and any distribution group not check the box "Require that all senders are authenticated." Any ideas on how to solve the problem?

    Read the article

< Previous Page | 897 898 899 900 901 902 903 904 905 906 907 908  | Next Page >