Search Results

Search found 27238 results on 1090 pages for 'local variable'.

Page 909/1090 | < Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >

• LogMeIn Hamachi for Linux

  - by tlunter

  So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

  Read the article

• Windows Server 2008 Remote Desktop printing blank pages

  - by Colin Pickard

  I have a Windows Server 2008 (not R2) machine which has problems with redirected printing. Clients connecting via Remote Desktop have their printers redirected and appearing for them to print to, but printing from applications on the server to local printers is giving blank pages, missing pages, or pages with headers/footers but no middle section. The issues are consistant for similar prints, but sometimes other prints and/or applications will work correctly. I have installed PDFCreator locally on the server, and the same print jobs sent by the same application appear correctly in the PDFs. Printing that PDF via the redirected printer prints correctly. I have tried the following: Installing drivers. I’ve installed several drivers different drivers, for both the client and server operating system and architecture, on the client and the server. Reinstalling the printers. I’ve tried reinstalling on remote print servers, the clients, and the host server, and tried different client machines. Granting everyone full permissions on the print spool folder on the server. Editing the registry to forward non-USB ports (http://support.microsoft.com/kb/302361) None of these have made any difference. The clients are using Windows 7 or Windows XP and none of them have any issues with printing locally. Any ideas? Thanks!

  Read the article

• How do I make dnsmasq serve IP addresses via IPoIB?

  - by Matt

  I have a cluster farm that I'm setting up. The nodes (computers in the farm) are connected via ethernet & IP over Infiniband. I'm needing to netboot the nodes and thought dnsmasq would fit well as it provides all the features including support for DHCP over IB and it works great for our ethernet setup. However, I can't seem to get it to provide IP addresses to the infiniband adaptors on the nodes. Each node is running an Ubuntu desktop 12.04 LTS. The dnsmasq server is running on ubuntu server 12.04LTS and has the following test config: dhcp-authoritative domain-needed bogus-priv expand-hosts no-hosts domain=local dhcp-range=eth0,10.0.0.10,10.0.0.255,12h dhcp-option=eth0,3,10.0.0.1 dhcp-range=ib0,10.1.1.10,10.1.1.255,12h dhcp-option=ib0,3,10.1.1.1 log-queries log-dhcp IPoIB works between nodes when configured statically but not with dhcp. On the nodes the file /etc/network/interfaces contains auto lo iface lo inet loopback auto ib0 iface ib0 inet dhcp #iface ib0 inet static #address 10.1.1.5 #netmask 255.0.0.0 up echo connected >`find /sys -name mode | grep ib0` Is there something I need to do on the client or server end to make this work?

  Read the article

• how does svn work with apache?

  - by ajsie

  i've got ubuntu installed with lamp. im using webdav to upload/download files to/from the ubuntu web server, after i have edited the php source files in netbeans. however, i wonder what is best practice for editing source files and committing these changes to the new website. cause if we are 2-3 developers, i guess we have to use svn. but i have never used it before so i wonder how it works. should i install it and then select the /var/www (apaches webroot) as the repository folder? then when i check in, all the changes will apply immediately? could someone please explain following steps: how to download, edit the source files, upload the files and see the new changes in the website. cause i have only worked with a local apache before, and it was only me. now there will be some more programmers so i have to set up a decent, central environment for this, and have to know how netbeans, svn, webdav and apache works all together. thanks!

  Read the article

• Member Status: Inquorate in RHEL 5.6

  - by Eugene S

  I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved (however I didn't capture the message completely). In order to investigate the issue I looked at /var/log/messages and I've discovered these errors. Below is the output of few commands I got when tried to investigate the issue, however I don't have enough knowledge to make use of this information. [root@system1a ~]# clustat Cluster Status for system4081 @ Sun Mar 25 11:45:48 2012 Member Status: Inquorate Member Name ID Status ------ ---- ---- ------ chb_sys1a 1 Online, Local chb_sys2a 2 Offline [root@system1a ~]# cman_tool nodes Node Sts Inc Joined Name 1 M 872 2012-03-25 08:43:07 chb_sys1a 2 X 0 chb_sys2a [root@system1a ~]# qdiskd -f -d [17654] debug: Loading configuration information [17654] debug: 0 heuristics loaded [17654] debug: Quorum Daemon: 0 heuristics, 1 interval, 10 tko, 0 votes [17654] debug: Run Flags: 00000035 [17654] info: Quorum Daemon Initializing stat: Bad address [17654] crit: Initialization failed I tried to search through the internet and found out a quite similar issue here. However, for some reason I am not able to access the bug on bugzilla. The link to the bug is here

  Read the article

• Launching Installer Via Powershell and WinRM and Nothing Happens

  - by Nick DeMayo

  I'm currently working on a Powershell script to run some Microsoft Hotfix installers remotely on several Windows Server 2008 R2 servers that I manage. Basically, the script copies all the appropriate files up to the server, and then runs the installer via Invoke-Command, like so: function InstallCU { Write-Host "Installing June 2013 CU..." Invoke-Command -ComputerName $ServerName -ScriptBlock { Start-Process "c:\aaa\prjcusp2\ubersrvprj2010-kb2817530-fullfile-x64-glb.exe" -ArgumentList "/passive" } } If I run the "Start-Process" command locally on the server, the installer runs properly. However, when trying to run it remotely, nothing happens (actually, I can see the installer start up in Task Manager, but it closes a couple seconds later and doesn't run). I've attempted giving the Invoke-Command -Credentials, I've turned off UAC on the server, and I've ensured that my WinRM settings (running 'winrm quickconfig' and setting TrustedHosts to *) are correct. I've also tried having the Invoke-Command script run a local Powershell script to run the installer and changing the Argument from '/passive' to 'quiet' (in case it can't remotely launch something that has a UI), but again, no dice. Is there anything else I can try, or am I just not going to be able to do this?

  Read the article

• mysql is not connecting after data directory change

  - by user123827

  I've changed data directory in /etc/my.cnf. datadir=/data/mysql socket=/data/mysql/mysql.sock I also moved mysql folder from /var/lib/mysql/ to /data/mysql Now when i connect to mysql i get following error: [root@youradstats-copy mysql]# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) also when i see /var/logs/msqld.log i get following messages in that: InnoDB: Setting log file /data/mysql/ib_logfile0 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 120704 7:43:31 InnoDB: Log file /data/mysql/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /data/mysql/ib_logfile1 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 InnoDB: Cannot initialize created log files because InnoDB: data files are corrupt, or new data files were InnoDB: created when the database was started previous InnoDB: time but the database was not shut down InnoDB: normally after that. 120704 7:43:36 [ERROR] Plugin 'InnoDB' init function returned error. 120704 7:43:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. I shut down mysql properly before doing these changes and then started it properly but dont know why getting these messages. please help to solve issue as i have changed socket path in my.cnf but still its pointing to old path...

  Read the article

• Remote Desktop Session Black after Minimize

  - by TorgoGuy

  PROBLEM: When I minimize a remote desktop session and restore it, the remote desktop screen shows up black. This only happens when connecting to a particular computer. DETAILS: If I start clicking around in the black area, portions of the screen will start redrawing and showing up correctly. For example, if I leave a window open in the remote session and click where that window is located on the remote computer, then that window--and only that window--will redraw, and sometimes a portion of that window won't redraw (usually the toolbar). And to clarify--the window only has to be minimized momentarily, so it doesn't seem to be a timeout issue. Clicking or typing in the remote session still causes the remote computer to respond appropriately. Disconnecting from the session and reconnecting restores the whole screen image, as does clicking all over the place in the black image (causing each section to redraw). CONFIGURATION: This problem only happens for me when connecting to a particular computer (a W2K Server box configured to allow remote administration) and only with certain client computers. I've tried 7 different client computers with various versions of Remote Desktop (the OSes were: Win2K, Server 2003, Server 2008, Windows 7 RC, 3 XP) and two of them exhibit the problem (one is one of the XP boxes and the other is Windows 7). Those same computers can RDP to other computers without problem. RESOLUTION ATTEMPTS: I have tried the following: Disable the LOCAL screen saver as mentioned on Technet Turned off bitmap caching in the client, as mentioned on many forums. Updated to version 6.1 of the remote desktop client Using mRemote (I doubted this would work since it uses MS's code for connecting to RDP servers) Turning off all video acceleration. QUESTION: Any ideas on what is causing this?

  Read the article

• Dynamically updating DNS records with NSUPDATE fails

  - by Thuy

  I've got my own nameserver ns3.epnddns.com and domain epnddns.com I wanted to try and update the records dynamiclly from home using nsupdate but when I run nsupdate -k Kwww.epnddns.com.+157+17183.key i get the following errors Kwww.epnddns.com.+157+17183.key:1: unknown option 'www.epnddns.com.' Kwww.epnddns.com.+157+17183.key:2: unexpected token near end of the file Kwww.epnddns.com.+157+17183.{private,key}: unexpected token Not sure why I get these errors, I'll post my complete setup. Generated keys on my home pc, using dnssec-keygen -a HMAC-MD5 -b 128 -n HOST www.epnddns.com. created /var/named/ and put the keys there and chmod them to 600. transfered the keys to my nameserver ns3.epnddns.com, created /var/named/ ,put the keys there and chmod them to 600 made dnskey.conf in /var/named and added key www.epnddns.com. { algorithm hmac-md5; secret "my secret from they keys=="; }; chmod to 600 then in /etc/bind/named.conf.local include "/var/named/dnskeys.conf"; zone "epnddns.com" { type master; file "/etc/bind/zones/epnddns.com.zone"; allow-transfer { myhomeip; }; //its my home ip so not in the same network allow-update { key www.epnddns.com.; }; }; I restarted bind without any error messages so it seems to be working on the nameserver at least. But on my homepc when i try and run the nsupdate i get those error messages. Thanks in advance for any help or insightful advice.

  Read the article

• Error with procmail script to use Maildir format

  - by bradlis7

  I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

  Read the article

• Installing Mysql Ruby gem on 64-bit CentOS

  - by Jacek

  Hi, I have a problem installing mysql ruby gem on 64bit CentOS machine. [jacekb@vitaidealn ~]$ uname -a Linux vitaidealn.local 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux Mysql and mysql-devel packages are installed. Mysql_config provides following paths: Usage: /usr/lib64/mysql/mysql_config [OPTIONS] Options: --cflags [-I/usr/include/mysql -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -fwrapv] --include [-I/usr/include/mysql] --libs [-L/usr/lib64/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -L/usr/lib64 -lssl -lcrypto] --libs_r [-L/usr/lib64/mysql -lmysqlclient_r -lz -lpthread -lcrypt -lnsl -lm -lpthread -L/usr/lib64 -lssl -lcrypto] --socket [/var/lib/mysql/mysql.sock] --port [3306] --version [5.0.45] --libmysqld-libs [-L/usr/lib64/mysql -lmysqld -lz -lpthread -lcrypt -lnsl -lm -lpthread -lrt -L/usr/lib64 -lssl -lcrypto] Trying to install: [jacekb@vitaidealn ~]$ gem install mysql -- --with-mysql-include=/usr/include/mysql --with-mysql-libs=/usr/lib64/mysql ... ERROR: Error installing mysql: ERROR: Failed to build gem native extension. /usr/bin/ruby extconf.rb --with-mysql-include=/usr/include/mysql --with-mysql-libs=/usr/lib64/mysql checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. I would appreciate any help. Thanks for reading :).

  Read the article

• SocketException (Timeout) only when running as scheduled task

  - by BVartin

  I'm running a C# web-scrapper application (that I wrote) on a Windows Server 2003 instance under a user belonging to the local Administrator group. When I run it within a desktop/remote-desktop session the application runs successfully but when I schedule it to run under the same user/security-context outside of the desktop session, all socket connections timeout. The scheduled task calls a batch file which in-turn calls the application. The Windows Server 2003 instance has a very basic configuration and isn't even connected to a domain. I cannot find anything in any firewall or security configuration which is preventing this but maybe I have overlooked something, can anyone be of any assistance? System.Net.WebException: Unable to connect to the remote server --- System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond X.X.X.X:443 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()

  Read the article

• Connecting to RDS database from EC2 instance using bind9 CNAME alias

  - by mptre

  I'm trying to get internal DNS up and running on a EC2 instance. The main goal is to be able to define CNAME aliases for other AWS services. For example: Instead of using the RDS endpoint, which might change over time, an alias mysql.company.int can be used instead. I'm using bind9 and here's my config files: /etc/bind/named.conf.local zone "company.int" { type master; file "/etc/bind/db.company.int"; }; /etc/bind/db.company.int ; $TTL 3600 @ IN SOA company.int. company.localhost. ( 20120617 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS company.int. @ IN A 127.0.0.1 @ IN AAAA ::1 ; CNAME mysql IN CNAME xxxx.eu-west-1.rds.amazonaws.com. The dig command ensures me my alias is working as excepted: $ dig mysql.company.int ... ;; ANSWER SECTION: mysql.company.int. 3600 IN CNAME xxxx.eu-west-1.rds.amazonaws.com. xxxx.eu-west-1.rds.amazonaws.com. 60 IN CNAME ec2-yyy-yy-yy-yyy.eu-west-1.compute.amazonaws.com. ec2-yyy-yy-yy-yyy.eu-west-1.compute.amazonaws.com. 589575 IN A zzz.zz.zz.zzz ... As far as I can understand a reverse zone isn't needed for a simple CNAME alias. However when I try to connect to MySQL using my newly created alias the operation is giving me a timeout. $ mysql -uuser -ppassword -hmysql.company.int ERROR 2003 (HY000): Can't connect to MySQL server on 'mysql.company.int' (110) Any ideas? Thanks in advantage!

  Read the article

• Computer loses all installed programs and appears to return OS-only state

  - by Jake

  This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

  Read the article

• Samba server NETBIOS name not resolving, WINS support not working

  - by Eric

  When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

  Read the article

• How to disable auto insert notification in Windows 7?

  - by White Phoenix

  Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

  Read the article

• Determine the time difference between two linux servers

  - by Paul

  I am troubleshooting a latency network issue on a network. It is probably a nic or cabling issue, but while I was going through the process of figuring it out, I was looking at the timings of a ping packet leaving a network card and arriving at another server. Both linux. So I have tcpdump running on both, and I issue a ping from one to the other, and back again, and looking at the timing differences might have shed light on where the latency is coming from. It is an academic exercise now, as I need to eliminate some more fundamental causes, but I was curious as to how this could be achieved. Given that ntpd is installed and running on two servers, how can I confirm the current time discrepency between the two servers, to whatever level of accuracy is possible - given that we are talking about latency on a local lan, which is ideally a millisecond or so. NTP itself is accurate to a couple of ms under good conditions, and as both servers are in the same environment, they should (presumably) achieve a similar level of accuracy, and so should have a time discrepency between them of a only few ms - but how can I check this?

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• Steps after installing vCenter Server?

  - by goober

  I'm working with: Two new ESX servers that I'm configuring A new Server 2008 R2 machine that I'm using for vCenter. I took the following steps: Installed the Hypervisor on the 2 ESX machines Checked their setup/connectivity (appears to be fine; can ping, etc.) Installed vCenter Server on the Win2k8R2 box. This included the install of a SQL Express database (we're a small shop) FYI, I changed some of the ports (443 -- 8443, 80 --8080, etc.) Installed vCenter Web Client Server on the Win2k8R2 box Problems my vSphere Client on my Desktop fails to connect. Part of this is that it asks me for a username and password, but I don't recall specifying one when I set up the install. I receive the error "vSphere Client could not connect to [machinename]. An unknown connection error occurred. (The request failed because of a connection failure. (Unable to connect to the remote server))" I have also tried to use local machine admin credentials, including the format machinename\localuseracct. I have also tried using my domain credentials which are an admin for that box. I have also checked and the service is running. I also tried to connect via vSphere client locally installed on the server. It translates "localhost" to the correct name but gives the same error. I cannot register the vCenter server from the vCenter Web Client Server. I'm not sure if this is necessary, as they're both on the same machine, but it seems like the logical next step. I also receive a "failed to connect" error in this case as well. FYI, both the vCenter server and the vCenter Web Client Server are installed on the same Win2k8R2 server. What am I missing here? What is the best way to test in this case?

  Read the article

• Is there a reason to use internal DNS over 8.8.8.8 ?

  - by skylarking

  I've inherited a LAN where there is really no name resolution being done for local resources... i.e. all users enter IP addresses manually to access printers and network shares. There are no LDAP servers or domains either....workstations simply connect to the network without authentication. DHCP is handled via a core switch... And DNS settings are also handed out by this same core switch. Currently, the DNS assignments are as such, and in this order: 10.1.1.50 / old Pentium III Windows 2003 box running DNS service- 128 MB RAM 169.200.x.x / ISP 4.2.2.2. / the well known public one There a couple thousand clients on the LAN....and most of the activity is web browsing ( this is an educational setting ). First of all, the server seems woefully underpowered for this task...yet there is virtually no slowness when web surfing by clients.... How much horsepower should a heavily used DNS server have ? I have also heard using 4.2.2.2 is a bad idea .... since it has been so overused... Finally, wouldn't it make sense to have a robust external DNS server listed first? ( Google's 8.8.8.8 would seem to be a logical candidate )

  Read the article

• Cannot install passenger with Nginx

  - by Luc

  Hello, I have a rack application that I want to migrate from Ruby 1.8.7 + Apache + passenger to Ruby 1.9.1 + Nginx + passenger. I have made up the following script for a quick install all in one, and it raises an error... Here is the installation script: (basic one with all the steps I need to install everything on a Ubuntu 10.04 Lucid Lynx fresh box) Nginx sources cd /tmp wget http://nginx.org/download/nginx-0.7.66.tar.gz tar xzf nginx-0.7.66.tar.gz cd nginx-0.7.66 openssl required for SSL/TLS sudo apt-get install openssl sudo apt-get install libssl-dev Compilation stuff sudo apt-get zlib1g-dev Ruby interpreter 1.9.1 sudo apt-get install ruby1.9.1 ruby1.9.1-dev rubygems1.9.1 irb1.9.1 ri1.9.1 rdoc1.9.1 build-essential nginx libopenssl-ruby1.9.1 Make sure default ruby uses version 1.9.1 sudo update-alternatives --install /usr/bin/ruby ruby /usr/bin/ruby1.9.1 400 --slave /usr/share/man/man1/ruby.1.gz ruby.1.gz /usr/share/man/man1/ruby1.9.1.1.gz --slave /usr/bin/ri ri /usr/bin/ri1.9.1 --slave /usr/bin/irb irb /usr/bin/irb1.9.1 --slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.1 sudo update-alternatives --config ruby Passenger (rake-0.8.7, fastthread-1.0.7, rack-1.1.0, passenger-2.2.14) sudo gem install passenger Activate Passenger in nginx, select option 2 to use nginx sources donwloaded above cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module And this is the error message I got: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/ContentHandler.c gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Wunused-function -Wunused-variable -Wunused-value -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /tmp/pcre-8.00 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/nginx/StaticContentHandler.o \ /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c: In function ‘passenger_static_content_handler’: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c:71: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’ make[1]: *** [objs/addon/nginx/StaticContentHandler.o] Error 1 make[1]: Leaving directory `/tmp/nginx-0.7.66' make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /var/lib/gems/1.9.1/gems/passenger-2.2.14/doc/Users guide Nginx.html I do not understand the reason of this error. Is this a compatibility problem ? Hope you have any clues :) Thanks a lot, Luc

  Read the article

• Windows 7 deployment thru WDS

  - by vn

  Hello, I am deploying new systems on my network and I built my reference computer by installing the OS the manufacturers (Dell and a custom built system from some local business) gave with all drivers, installed all the desired applications. As for the settings part, I'm doing most of it thru GPOs. I want to image my reference computer and deploy it with WDS. i found several links on how to sysprep, but they're all doing it with some differences without explaining them. My questions : How do I manage (into sysprep) the domain join/computer naming part since (from what I understand) WDS manages that? How do I know/determine what I need to setup into my sysprep.xml? Can you sysprep a first time, try and if it fails, do some modifications and try again? I am thinking of doing a basis sysprep, checking what info can be automated and correct that in the answer file. What do I miss if skipping the "audit" mode? I don't plan on re-doing the reference computer... I read that when sysprepping, it resets settings from the reference computer like the computer name, activation/key and such... what setting is sysprep resetting by default that I should be aware of? I must admit I am quite lost about Win7, sysprep, RIS, MDI toolkit, WDS.. I understand the way of doing with XP, but it changed so much with Windows 7! The links I am reading are : http://far2paranoid.wordpress.com/2007/12/05/prep-for-sysprep/ http://blog.brianleejackson.com/sysprep-a-windows-7-machine-%E2%80%93-start-to-finish-v2 http://www.ehow.com/print/how_5392616_sysprep-machine-start-finish-v2.html Thank you VERY much for any answers, they are much appreciated.

  Read the article

• Moving domain and keeping IMAP email - Linux Evolution, Mac Mail

  - by Douglas Squirrel

  This question is about keeping email during a server move, where the clients are Linux (me) and Mac (my wife) using IMAP. I receive email at [email protected] using a webmail service that my hosting company (1and1) provides. I read it via IMAP in evolution, so I should have copies of all the emails on my local machine. I have just moved mydomain.com from one type of account to another, and the hosting company don't move my existing email on the server when I do this - I assume they move my account to a different mailserver, and don't choose to provide a migration path for the email to move too (yes, this is annoying). Before migrating, I backed up Evolution (File - Backup settings) and did a spot-check in the evolution-backup.tar.gz file to be sure that my mail was in there. After migrating, I restored (File - Restore settings) and had hoped that I would see all my mail again. Unfortunately, Evolution just shows me new mail sent to the account, not the old mail. Is there a way to get the old mail back in the mailserver, or at least displaying in Evolution, as it was before the move? If not, can I read it in some convenient way, e.g. in Evolution offline or in a text file (then I can pick the mails I really want to keep and resend them to myself)? Also, I am about to do a similar move for my wife's domain, [email protected]. She reads her mail on a Mac using IMAP to Apple Mail. Is there anything I can do to make the move smooth for her? (I have backed up [her user]/Library/Mail already, but not sure what to do once the move is done.)

  Read the article

• Numeric UIDs/GIDs in ACLs on OS X server (10.6)

  - by Oliver Humpage

  Hi, On one (old OS X 10.4) server I'm tarring up some files which have ACLs. I'm then using ``tar -xp'' to untar the archive onto a new 10.6 server, which doesn't have any users/groups configured on it yet except the default admin (UID 501) (there's a reason for that, don't ask!). Obviously this means an "ls -lne" will list files and ACLs with numeric UIDs and GIDs. Now for the normal file permissions it makes sense: you get UIDs like "1037". And for some ACLs, it also makes sense: you get things like "AAAABBBB-CCCC-DDDD-EEEE-FFFF00000402" for groups (0x402 = GID 1026) and "FFFFEEEE-DDDD-CCCC-BBBB-AAAA000001F5" for users (0x1F5 = UID 501). However, some ACLs have a UIDs like "E51DA674-AE70-41BC-8340-9B06C243A262" or GIDs like "0A3FCD24-0012-46FA-B085-88519E55EF29" and I have absolutely no idea how to translate these IDs back into something that could be matched back to the original IDs (UID 1072 and GID 1047 respectively in this example). Can anyone help me translate these weird long hex strings? (Basically we're moving from local users to an Active Directory setup, so I want to move all files to the new server with permissions intact, then chmod, chgrp and set ACLs such that we translate old IDs to the new AD IDs. Hence needing some way to map between the sets. I don't believe there's an easier way to do this?) Many thanks, Oliver.

  Read the article

• Purge print driver cache on windows 7 with powershell script

  - by Doltknuckle

  [Background] We have been having trouble with our network clients suddenly being unable to print. They get an odd error with a hex code. We determined that something in the driver was messed up and we could resolve the issue by clearing the driver cache and reinstalling the driver. This happens to random computers every so often. We're assuming this is a bug with the latest Dell 2330dn driver since that is the only model that has this problem. [Problem] What we are looking to do is write a Powershell script that would clear the driver cache and redownload the driver. I see a ton of scripts out there to manage queues, servers, and ports, but nothing for local driver cache management. [Current Workaround] Since we have to do this manually, I'll write out the steps so you know what we want this script to replicate. Disable print spooler Restart machine Delete contents of: C:\windows\system32\spool\drivers\w32x86 Enable print spooler and start service. Delete the network printer object and re-add network printer off of server. [Request] I'm good enough with powershell to translate the above workaround into a pair of scripts. I'd like to find a more elegant solution then my current workaround. Any suggestions?

  Read the article

< Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >