Search Results

Search found 4775 results on 191 pages for 'trace flags'.

Page 91/191 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98 | Next Page >

One of the partion on a usb harddisk cannot automount

- by holmescn

It is a very strange problem. My usb harddisk has four partitions, one is primary, the other three are logical (contained within an extended partition). When I plug in the disk, three of the partitions are mounted automatically except one--the first logical partition in the extended partition. Initially I thought it is the problem of system (at that time I used Mint). But after I change to Ubuntu 12.04, the problem wasn't solved. I don't want to add a rule in fstab, and I want to know what happened. The disk is fine, and the partition can be accessed in Windows and mounted manually. result of dmesg | tail: [100933.557649] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd [100933.651891] scsi8 : usb-storage 2-1.2:1.0 [100934.649047] scsi 8:0:0:0: Direct-Access SAMSUNG PQ: 0 ANSI: 0 [100934.650963] sd 8:0:0:0: Attached scsi generic sg2 type 0 [100934.651342] sd 8:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [100934.651977] sd 8:0:0:0: [sdb] Write Protect is off [100934.651989] sd 8:0:0:0: [sdb] Mode Sense: 03 00 00 00 [100934.652836] sd 8:0:0:0: [sdb] No Caching mode page present [100934.652848] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.655354] sd 8:0:0:0: [sdb] No Caching mode page present [100934.655367] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.734652] sdb: sdb1 sdb3 < sdb5 sdb6 sdb7 > [100934.737706] sd 8:0:0:0: [sdb] No Caching mode page present [100934.737725] sd 8:0:0:0: [sdb] Assuming drive cache: write through [100934.737731] sd 8:0:0:0: [sdb] Attached SCSI disk result of parted -l: Model: SAMSUNG (scsi) Disk /dev/sdb: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 21.5GB 21.5GB primary ntfs 3 21.5GB 320GB 299GB extended lba 5 21.5GB 129GB 107GB logical ntfs 6 129GB 236GB 107GB logical ntfs 7 236GB 320GB 83.8GB logical ntfs

Read the article
When was sys.dm_os_wait_stats last cleared?

- by SQLOS Team

The sys.dm_os_wait_stats DMV provides essential metrics for diagnosing SQL Server performance problems. Returning incrementally accumulating information about all the completed waits encountered by executing threads it is a useful way to identify bottlenecks such as IO latency issues or waits on locks. The counters are reset each time SQL server is restarted, or when the following command is run: DBCC SQLPERF ('sys.dm_os_wait_stats', CLEAR); To make sense out of these wait values you need to know how they change over time. Suppose you are asked to troubleshoot a system and you don't know when the wait stats were last zeroed. Is there any way to find the elapsed time since this happened? If the wait stats were not cleared using the DBCC SQLPERF command then you can simply correlate the stats with the time SQL Server was started using the sqlserver_start_time column introduced in SQL Server 2008 R2: SELECT sqlserver_start_time from sys.dm_os_sys_info However how do you tell if someone has run DBCC SQLPERF ('sys.dm_os_wait_stats', CLEAR) since the server was started, and if they did, when? Without this information the initial, or historical, wait_stats have less value until you can measure deltas over time. There is a way to at least estimate when the stats were last cleared, by using the wait stats themselves and choosing a thread that spends most of its time sleeping. A good candidate is the SQL Trace incremental flush task, which mostly sleeps (in 4 second intervals) and in between it attempts to flush (if there are new events – which is rare when only default trace is running) – so it pretty much sleeps all the time. Hence the time it has spent waiting is very close to the elapsed time since the counter was reset. Credit goes to Ivan Penkov in the SQLOS dev team for suggesting this. Here's an example (excuse formatting): 144 seconds after the server was started: select top 10 wait_type, wait_time_ms from sys.dm_os_wait_stats order by wait_time_ms desc wait_type wait_time_ms--------------------------------------------------------------------------------------------------------------- XE_DISPATCHER_WAIT 242273LAZYWRITER_SLEEP 146010LOGMGR_QUEUE 145412DIRTY_PAGE_POLL 145411XE_TIMER_EVENT 145216REQUEST_FOR_DEADLOCK_SEARCH 145194SQLTRACE_INCREMENTAL_FLUSH_SLEEP 144325SLEEP_TASK 73359BROKER_TO_FLUSH 73113PREEMPTIVE_OS_AUTHENTICATIONOPS 143 (10 rows affected) Reset: DBCC SQLPERF('sys.dm_os_wait_stats', CLEAR)" DBCC execution completed. If DBCC printed error messages, contact your system administrator. After 8 seconds: select top 10 wait_type, wait_time_ms from sys.dm_os_wait_stats order by wait_time_ms desc wait_type wait_time_ms--------------------------------------------------------------------------------------------------------------------- REQUEST_FOR_DEADLOCK_SEARCH 10013LAZYWRITER_SLEEP 8124SQLTRACE_INCREMENTAL_FLUSH_SLEEP 8017LOGMGR_QUEUE 7579DIRTY_PAGE_POLL 7532XE_TIMER_EVENT 5007BROKER_TO_FLUSH 4118SLEEP_TASK 3089PREEMPTIVE_OS_AUTHENTICATIONOPS 28SOS_SCHEDULER_YIELD 27 (10 rows affected) After 12 seconds: select top 10 wait_type, wait_time_ms from sys.dm_os_wait_stats order by wait_time_ms desc wait_type wait_time_ms------------------------------------------------------------------------------------------------------ REQUEST_FOR_DEADLOCK_SEARCH 15020LAZYWRITER_SLEEP 14206LOGMGR_QUEUE 14036DIRTY_PAGE_POLL 13973SQLTRACE_INCREMENTAL_FLUSH_SLEEP 12026XE_TIMER_EVENT 10014SLEEP_TASK 7207BROKER_TO_FLUSH 7207PREEMPTIVE_OS_AUTHENTICATIONOPS 57SOS_SCHEDULER_YIELD 28 (10 rows affected) It may not be accurate to the millisecond, but it can provide a useful data point, and give an indication whether the wait stats were manually cleared after startup, and if so approximately when. - Guy Originally posted at http://blogs.msdn.com/b/sqlosteam/

Read the article
Can't connect to hidden network with BCM4313

- by poomerang

The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

Read the article
Remote Debugging

- by Pemdas

Obviously, the easiest way to solve a bug is to be able to reproduce it in house. However, sometimes that is not practical. For starters, users are often not very good at providing you with useful information. Costumer Service: "what seems to be the issue?" User: "It crashed!" To further compound that, sometimes the bug only occurs under certain environmentally conditions that can not be adequately replicated in house. With that in mind, it is important to build some sort of diagnostic framework into your product. What type of solutions have you seen or used in your experience? Logging seems to be the predominate method, which makes sense. We have a fairly sophisticated logging frame work in place with different levels of verbosity and the ability to filter on specific modules (actually we can filter down to the granularity of a single file). Error logs are placed strategically to manufacture a pretty good representation of a stack trace when an error occurs. We don't have the luxury of 10 million terabytes of disk space since I work on embedded platforms, so we have two ways of getting them off the system: a serial port and a syslog server. However, an issue we run into sometimes is actually getting the user to turn the logs on. Our current framework often requires some user interaction.

Read the article
Ubuntu server 11.04 recognize only 1 core instead of 4

- by Kreker

I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

Read the article
How to Get a Smartphone-Style Word Suggestion on Windows

- by Zainul Franciscus

Have you ever wished that you can type faster and better in Windows ? Then you’re in luck, because today we’ll show you how to get a smartphone’s word suggestion in Windows. To accomplish that, you need to install AI Type, a software that gives word suggestion when you write in Windows. AI Type not only fulfils our gratification to have a smartphone-style word suggestion for Windows, AI Type also improves our writings by suggesting word according to its context. It will also try to match words according to the probability in which other users may have used it. Installing AI Type is a breeze; Just download the installer from AI Type website, run the executable, fill in a registration form, and you’re all set to use AI Type for your daily writing. Once you’re done with the installation, AI Type appears on your system tray. Latest Features How-To Geek ETC Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Sync Blocker Stops iTunes from Automatically Syncing The Journey to the Mystical Forest [Wallpaper] Trace Your Browser’s Roots on the Browser Family Tree [Infographic] Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More

Read the article
Synaptics drivers are not loading on Kubuntu 13.10 on Dell Vostro 2420

- by Alok Singh Mahor

I freshly installed Kubuntu 13.10, 32 bit version on newly purchased Dell Vostro 2420. everything is working fine except scrolling and multitouch features through touchpad. I am able to change position of cursor using touchpad and able to tap (single click and double click) but scrolling is not working I tried to find out solution by searching on google but could not find proper solution to load synaptics drivers. i am listing some details: Laptop: Dell Vostro 2420 Linux Kernel version and distribution: 3.11.0-12-generic, Kubuntu 13.10 output of xinput list is ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys id=13 [slave keyboard (3)] Output of synclient -l is Couldn't find synaptics properties. No synaptics driver loaded? output of lshw is at http://paste.ubuntu.com/6645687/ xserver log and dmesg dont have trace of synaptics kindly tell me how to troubleshoot this problem.

Read the article
What's the best practice to do SOA exception handling?

- by sun1991

Here's some interesting debate going on between me and my colleague when coming to handle SOA exceptions: On one side, I support what Juval Lowy said in Programming WCF Services 3rd Edition: As stated at the beginning of this chapter, it is a common illusion that clients care about errors or have anything meaningful to do when they occur. Any attempt to bake such capabilities into the client creates an inordinate degree of coupling between the client and the object, raising serious design questions. How could the client possibly know more about the error than the service, unless it is tightly coupled to it? What if the error originated several layers below the service—should the client be coupled to those lowlevel layers? Should the client try the call again? How often and how frequently? Should the client inform the user of the error? Is there a user? By having all service exceptions be indistinguishable from one another, WCF decouples the client from the service. The less the client knows about what happened on the service side, the more decoupled the interaction will be. On the other side, here's what my colleague suggest: I believe it’s simply incorrect, as it does not align with best practices in building a service oriented architecture and it ignores the general idea that there are problems that users are able to recover from, such as not keying a value correctly. If we considered only systems exceptions, perhaps this idea holds, but systems exceptions are only part of the exception domain. User recoverable exceptions are the other part of the domain and are likely to happen on a regular basis. I believe the correct way to build a service oriented architecture is to map user recoverable situations to checked exceptions, then to marshall each checked exception back to the client as a unique exception that client application programmers are able to handle appropriately. Marshall all runtime exceptions back to the client as a system exception, along with the stack trace so that it is easy to troubleshoot the root cause. I'd like to know what you think about this? Thank you.

Read the article
What data should be cached in a multiplayer server, relative to AI and players?

- by DevilWithin

In a virtual place, fully network driven, with an arbitrary number of players and an arbitrary number of enemies, what data should be cached in the server memory, in order to optimize smooth AI simulation? Trying to explain, lets say player A sees player B to E, and enemy A to G. Each of those players, see player A, but not necessarily each other. Same applies to enemies. Think of this question from a topdown perspective please. In many cases, for example, when a player shoots his gun, the server handles the sound as a radial "signal" that every other entity within reach "hear" and react upon. Doing these searches all the time for a whole area, containing possibly a lot of unrelated players and enemies, seems to be an issue, when the budget for each AI agent is so small. Should every entity cache whatever enters and exits from its radius of awareness? Is there a great way to trace the entities close by without flooding the memory with such caches? What about other AI related problems that may arise, after assuming the previous one works well? We're talking about environments with possibly hundreds of enemies, a swarm.

Read the article
Keep getting smbd errors, but apport asks questions I can't answer

- by Steve Kroon

What I want to know below is where to bug report the poor series of questions I'm being asked... Every time I reboot (at least), I get a crash dialog ("Sorry, Ubuntu 12.04 has experienced an internal error"). Clicking on show details shows the problem is with smbd, but the rest of the trace does not appear. When I wish to continue to send a bug report, I am told I will be asked a series of questions in a window titled "Apport". The first question asks: How would you best describe your setup? -I am running a Windows File Server -I am connecting to a Windows File Server. Since I am doing both, I have no idea which to choose. In any case, selecting one leads to the next question: Did this used to work properly with a previous release? -No -Yes But I never tried to use Samba in a previous release, so I can't seriously answer this. After picking an option here, I get more questions in a similar vein. Surely there should be "I don't know/I haven't tried" options, even if they simply mean you can't submit a useful bug report.

Read the article
There's IP but can't reach gateway

- by icky

I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

Read the article
A "tinkered" PC can ping by IP, not by hostname. How to fix?

- by aitchnyu

Like this: root@tis-server:~# ping www.google.com ping: unknown host www.google.com root@tis-server:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=55 time=50.3 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=55 time=65.4 ms It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. It also makes route add default gw 192.168.0.1 necessary for each reboot to atleast ping by IP. How do I fix this? It is Ubuntu 11.10 As requested: Output of ifconfig: eth0 Link encap:Ethernet HWaddr 48:5b:39:ae:21:98 inet addr:192.168.0.100 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::4a5b:39ff:feae:2198/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13194 errors:0 dropped:0 overruns:0 frame:0 TX packets:5156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1420596 (1.4 MB) TX bytes:827295 (827.2 KB) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4817 errors:0 dropped:0 overruns:0 frame:0 TX packets:4817 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377732 (377.7 KB) TX bytes:377732 (377.7 KB) Output of resolv.conf: Output of /etc/network/interfaces: GNU nano 2.2.6 File: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.100 netmask 255.255.255.0

Read the article
Unit testing and Test Driven Development questions

- by Theomax

I'm working on an ASP.NET MVC website which performs relatively complex calculations as one of its functions. This functionality was developed some time ago (before I started working on the website) and defects have occurred whereby the calculations are not being calculated properly (basically these calculations are applied to each user which has certain flags on their record etc). Note; these defects have only been observed by users thus far, and not yet investigated in code while debugging. My questions are: Because the existing unit tests all pass and therefore do not indicate that the defects that have been reported exist; does this suggest the original code that was implemented is incorrect? i.e either the requirements were incorrect and were coded accordingly or just not coded as they were supposed to be coded? If I use the TDD approach, would I disgregard the existing unit tests as they don't show there are any problems with the calculations functionality - and I start by making some failing unit tests which test/prove there are these problems occuring, and then add code to make them pass? Note; if it's simply a bug that is occurring that can be found while debugging the code, do the unit tests need to be updated since they are already passing?

Read the article
What to expect when creating a style guide?

- by ted.strauss

My organization would like to create a full fledged style guide that will be applicable to internal & external web sites, print advertising, trade show design, and overall branding. This article lays out the scope we're aiming for, and has links to many great examples style guide PDFs. The goal is to create a style guide comparable to one of these. I'd like to set realistic expectations within my organization for creating this document. So I have a few of questions pertaining to this: We don't have design staff. Should we be looking for a design firm or freelancer to come in for a 2-6 month contract, or do we need a longer commitment? If we do go with a firm or freelancer, would the pay-scale be comparable to typical design work, or is a style guide a higher order of work? How long should it take a pro to create a style guide? To make estimates more concrete, let's say web only, including all custom graphics. Any red flags to watch out for? (Compare: a new coder who fails to use css properly would be a red flag.)

Read the article
Oracle Payables Accounting Information Centres

- by user793553

Payables Accounting Information Centers Do you have error when trying to create accounting in Payables ? Do you have questions about Payables Accounting ? The following new Information centers include solutions to many of the issues and answers to your questions. Overview > Hot Topics > Resources Information Center: Oracle Payables Accounting R12 ( Doc ID 1476284.2) Under Hot Topics: Include details about: Recommended patches, new solution documents, GDF patches, Announcements, links to Communities. Under Resources: Popular Troubleshooting documents, Accounting Documentation, popular Knowledge documents, links to other info centers. Use Information Center: Using Oracle Payables Accounting (Doc ID 1478842.2) Include product documentation, Reconciliation, Upgrade, Performance, Undo Accounting, Trace and FND Debug, and Diagnostics. Troubleshoot Information Center: Troubleshooting Oracle Payables Accounting (Doc ID 1478863.2) Include Troubleshooting documents, Period close, GL Transfer, Trial Balance, Budget, Health Check. Do you have other questions..............? Post your question to the Oracle Payables Community 1. Log into My Oracle Support. 2. Click on the 'Community' link at the top of the page. 3. Click in 'Find a Community' field and enter Payables 4. Double click on Payables in the list. OR Click Here

Read the article
relationship between the model and the renderer

- by acrilige

I tried to build a simple graphics engine, and faced with this problems: i have a list of models that i need to draw, and object (renderer) that implements IRenderer interface with method DrawObject(Object* obj). Implementation of renderer depends on using graphics library (opengl/directx). 1st question: model should not know nothing about renderer implementation, but in this case where can i hold (cache) information that depends on renderer implementation? For example, if model have this definition: class Model { public: Model(); Vertex* GetVertices() const; private: Vertex* m_vertices; }; what is the best way to cache, for example, vertex buffer of this model for dx11? Hold it in renderer object? 2nd question: what is the best way for model to say renderer HOW it must be rendered (for example with texture, bump mapping, or may be just in one color). I thought it can be done with flags, like this: model-SetRenderOptions(RENDER_TEXTURE | RENDER_BUMPMAPPING | RENDER_LIGHTING); and in Renderer::DrawModel method check for each flag. But looks like it will become uncomfortable with the options count growth...

Read the article
Connected to wireless, but no internet access

- by boogaloo

After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

Read the article
BusEnum2 and a Minor Bug Fix

- by Kate Moss' Open Space

The default root bus driver, BusEnum, enumerate and active drivers one by one in synchronized manner. It is not only slowing the boot time but in the even if any of driver's init function (XXX_init) get hanged, the whole system won't boot at all. There is a sample of enhanced root bus driver, BusEnum2, on the http://msdn.microsoft.com/en-us/library/dd187254.aspx The page provides the sample code and the detail explanation of the design concept. With multi-threaded BusEnum2 on CE7 with SMP enabled system, the scalability is even more significant. Since you have more than one processor and it can load drivers in parallel! Everything looks good so far, except to there is a small bug in the sample code. Fortunately, it is easy to fix. But hard to trace if you ever enc outer it! The BUSENUM2 flag only defined in BUSENUM2\BUSDEF\sources but not in BUSENUM2\BUSENUM\sources. The DeviceFolder is implemented in BUSENUM2\BUSDEF but the instance is created in BUSENUM2\BUSENUM\busenum.cpp, so the result is it allocates less memory than actual need. Add CDEFINES=$(CDEFINES) -DBUSENUM2 into BUSENUM2\BUSENUM\sources and the problem fixed!

Read the article
X Error of failed request: BadMatch [migrated]

- by Andrew Grabko

I'm trying to execute some "hello world" opengl code: #include <GL/freeglut.h> void displayCall() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glEnable(GL_DEPTH_TEST); ... Some more code here glutSwapBuffers(); } int main(int argc, char *argv[]) { glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH); glutInitWindowSize(500, 500); glutInitWindowPosition(300, 200); glutInitContextVersion(4, 2); glutInitContextFlags(GLUT_FORWARD_COMPATIBLE); glutCreateWindow("Hello World!"); glutDisplayFunc(displayCall); glutMainLoop(); return 0; } As a result I get: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 128 (GLX) Minor opcode of failed request: 34 () Serial number of failed request: 39 Current serial number in output stream: 40 Here is the stack trace: fghCreateNewContext() at freeglut_window.c:737 0x7ffff7bbaa81 fgOpenWindow() at freeglut_window.c:878 0x7ffff7bbb2fb fgCreateWindow() at freeglut_structure.c:106 0x7ffff7bb9d86 glutCreateWindow() at freeglut_window.c:1,183 0x7ffff7bbb4f2 main() at AlphaTest.cpp:51 0x4007df Here is the last piece of code, after witch the program crashes: createContextAttribs = (CreateContextAttribsProc) fghGetProcAddress("glXCreateContextAttribsARB" ); if ( createContextAttribs == NULL ) { fgError( "glXCreateContextAttribsARB not found" ); } context = createContextAttribs( dpy, config, share_list, direct, attributes ); "glXCreateContextAttribsARB" address is obtained successfully, but the program crashes on its invocation. If I specify OpenGL version less than 4.2 in "glutInitContextVersion()" program runs without errors. Here is my glxinfo's OpelGL version: OpenGL version string: 4.2.0 NVIDIA 285.05.09 I would be very appreciate any further ideas.

Read the article
Sound not working after installing PCI video card and then removing it

- by bakhshu

I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

Read the article
Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

- by ubunsteve

I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

Read the article
Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

- by user1292548

I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

Read the article
Windows 8 Store App Crash Logs

- by David Paquette

I was recently working on a Windows 8 app, and the application was crashing occasionally. When resuming the application, the app would crash and close immediately without providing any feedback or information on what went wrong. The crash was very difficult to reproduce, and I could never get the crash to occur when I was debugging through Visual Studio. My app was crashing, and I had no idea what was going wrong! HELP!!! After doing some digging, I found that when a Windows 8 Store App crashes, an error is logged in Windows Administrative Events. You can view the details of any app crash by launching the Event Viewer and selecting Administrative Events under Custom Views. The Source of the error will be listed as AppHost. AppHost is the process that runs your Windows 8 Store App. The error details contain all the information you would expect to find, including a stack trace and line numbers. Windows 8 Tip: A shortcut for launching the Event Viewer in Windows 8. Right click on the bottom left corner of your desktop (where you normally click to go to the Start Screen). A menu will appear with shortcuts to a number of common system tasks such as Event Viewer, Task Manager, Command Prompt, and Device Manager.

Read the article
Can't run minecraft on ubuntu 12.04 lts [duplicate]

- by user170011

This question already has an answer here: How to correctly install and troubleshoot Minecraft (Client) 3 answers I was trying to run minecraft on my laptop with ubuntu 12.04 lts 64 bit. I have a lenovo ideapad p580 with 7.7 Gb and an Intel® Core™ i7-3520M CPU @ 2.90GHz × 4 processor. Under the graphics section of the system overview in ubuntu it says I have none installed. My computer comes with and nvidia geforce graphics card but it isnt recognized. When I start minecraft I get this crash report. ---- Minecraft Crash Report ---- // Shall we play a game? Time: 24/06/13 7:23 PM Description: Failed to start game org.lwjgl.LWJGLException: Could not init GLX at org.lwjgl.opengl.LinuxDisplayPeerInfo.initDefaultPeerInfo(Native Method) at org.lwjgl.opengl.LinuxDisplayPeerInfo.<init>(LinuxDisplayPeerInfo.java:52) at org.lwjgl.opengl.LinuxDisplay.createPeerInfo(LinuxDisplay.java:684) at org.lwjgl.opengl.Display.create(Display.java:854) at org.lwjgl.opengl.Display.create(Display.java:784) at org.lwjgl.opengl.Display.create(Display.java:765) at net.minecraft.client.Minecraft.a(SourceFile:235) at avv.a(SourceFile:56) at net.minecraft.client.Minecraft.run(SourceFile:507) at java.lang.Thread.run(Thread.java:679) A detailed walkthrough of the error, its code path and all known details is as follows: -- System Details -- Details: Minecraft Version: 1.5.2 Operating System: Linux (amd64) version 3.5.0-34-generic Java Version: 1.6.0_27, Sun Microsystems Inc. Java VM Version: OpenJDK 64-Bit Server VM (mixed mode), Sun Microsystems Inc. Memory: 406175448 bytes (387 MB) / 514523136 bytes (490 MB) up to 1908932608 bytes (1820 MB) JVM Flags: 2 total; -Xmx2048M -Xms512M AABB Pool Size: 0 (0 bytes; 0 MB) allocated, 0 (0 bytes; 0 MB) used Suspicious classes: No suspicious classes found. IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 LWJGL: 2.4.2 OpenGL: ~~ERROR~~ NullPointerException: null Is Modded: Probably not. Jar signature remains and client brand is untouched. Type: Client (map_client.txt) Texture Pack: Default Profiler Position: N/A (disabled) Vec3 Pool Size: ~~ERROR~~ NullPointerException: null I can run it on different versions of linux such as fedora.

Read the article
Presentation Plugin for NetBeans IDE 7.2

- by Geertjan

I got some excellent help from Mark Stephens, who is from IDR Solutions, which produces JPedal. Using the LGPL version of JPedal, and code provided by Mark, it's now possible to right-click the node that appears in the Presentation Window: ...after which, using a file browser (to locate a file on disk) or a URL (a very simple check is done, the URL must start with "http" and end with "pdf"), you can now open PDF files as images (thanks to conversion from PDF to images done by JPedal) into NetBeans IDE, typically (I imagine) for presentation purposes: Note that you should consider the plugin in "alpha" state. But, despite that, I've had good results. Try it and use the URL below, as a control test (since it works fine for me), which produces the result shown above: http://edu.netbeans.org/contrib/slides/netbeans-platform/presentation-4-actions.pdf However, for some PDFs, the plugin doesn't work, and I don't know why yet (trying to figure it out with Mark), resulting in this stack trace: java.lang.ArrayIndexOutOfBoundsException: 8 at org.jpedal.objects.acroforms.formData.SwingData.completeField(Unknown Source) at org.jpedal.objects.acroforms.rendering.DefaultAcroRenderer.createField(Unknown Source) at org.jpedal.objects.acroforms.rendering.DefaultAcroRenderer.createDisplayComponentsForPage(Unknown Source) at org.jpedal.PDFtoImageConvertor.convert(Unknown Source) at org.jpedal.PdfDecoder.getPageAsImage(Unknown Source) at org.jpedal.PdfDecoder.getPageAsImage(Unknown Source) Here's the location of the plugin, install it into NetBeans IDE 7.2; feedback is very welcome: http://plugins.netbeans.org/plugin/44525

Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98 | Next Page >