Search Results

Search found 3112 results on 125 pages for 'webforms routing'.

Page 91/125 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • DNS and IPs - Does DNS send the IP back to the client?

    - by Josh
    I ran across a site that talked about routing all cients requesting by IP to a "dead end." The clients accessing the site via ip it claimed were typically automated exploit tools and bots. Legitimate users type in the web address by it's domain question. With this context in mind, I don't really understand how DNS really works. I thought it worked by sending an IP back to a client for the requested DNS (like a phone book.) The client then uses the IP to access the site. The information above seems to indicate I misunderstand this. Can someone clarify this? (http://technet.microsoft.com/en-us/magazine/2005.01.hackerbasher.aspx)

    Read the article

  • Juniper SRX1400 VPN

    - by ank
    I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other than the simple things I want to do. We already have a VPN running on CISCO PIX hardware which we need to put to rest and we pretty much like to replicate the functionality, which is: 1) client makes a request to the outside interface of the SRX1400, 2) client gets authenticated, 3) if successful, then client is assigned all the usual DHCP stuff and becomes part of the network. What privileges this DHCP assigned network has, should be configurable of course with the usual routing/filtering methods. Am I asking for too much from the SRX for this kind of thing? Should I ditch the SRX for VPN and revert to an OpenVPN solution that I had working some time back also and was amazed at the ease of configuration, functionality and features?

    Read the article

  • How to set up Windows server 2008 to receive email?

    - by Saul
    First off apologies, I'm from a medical background not a networking one, but I've got roped into setting up a windows 2008 server. So far web server running, fixed IP address assigned (within a large private network of the National Health Service in the UK if that makes any difference) and the network team have assigned a DNS entry for me which works, so the server can be addressed as nww.myserver.nhs.uk I've only got ports open on the router for 80 and 443 (http and https) at the moment, so presume I need a different port to enable email services. My need is to be able to accept an email to the domain name like [email protected] in order to pick up a confirmation mail from an SSL issuer (Comodo) I guess to confirm that I control the domain. After that I don't actually need mail services on the server. I see lots of stuff about setting up SMTP services but thought that was about mail out and re-routing, but how do you get the server to "listen" for mail to the domain (assuming I open port xyz or whatever it is) ?

    Read the article

  • Only One GPU Detected in the Nvidia Quadra NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • Why is it a bad idea to use multiple NAT layers or is it?

    - by iamrohitbanga
    The computer network of an organization has a NAT with 192.168/16 IP address range. There is a department with a server that has an IP address 192.168.x.y and this server handles hosts of this department with another NAT with the IP address range 172.16/16. Thus there are 2 layers of NAT. Why don't they have subnetting instead. This would allow easy routing. I feel multiple layers of NAT can cause performance losses. Could you please help me compare the two design strategies.

    Read the article

  • How to route traffic through a specific SOCKS proxy on a per-app basis?

    - by GJ.
    I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis? It would also be helpful to know if there's a way to perform such routing globally, based on specific IP addresses (as this could allow for some reasonable workaround).

    Read the article

  • Active DFS node did not restore after failure

    - by Mark Henderson
    On Tuesday we had a Server 2008 R2 DFS-R node go offline unexpectedly. DFS did the right thing and started routing requests to a different node, which was in a remote site. This is by design, because even though it's slow, at least it's still working. We had the local DFS-R node back online within an hour, and it had synced all its changes 10 minutes after that. 3 of the 5 terminal servers reset themselves to the local DFS node, but the other two stayed pointing at the remote DFS node for three days, until someone finally piped up about how slow requests were. What reasons could there be why some, but not all, of the server reverted? Is the currently active DFS node for a namespace exposed anywhere in the OS (WMI, or even scripts) so that we can monitor the active nodes?

    Read the article

  • Grant relay to servers based on AD security group membership

    - by john
    We're moving our relay from an Exchange 2003 server to an Exchange 2010 server. I was hoping the "Grant or deny relay permissions to specific users or groups" option would still be available in some form, but I can't find out how to do it. I've read up on recieve connectors and so far I can't get it to work. I have edited the security on the Recieve Connector to allow the following extended rights to the group and added computer accounts to that group: Accept Routing Headers Bypass Anti-spam Submit to Server Accept any Sender Accept any Recipient Then I suddenly realised while testing... How would the receive connector resolve the permission to a particular AD object, maybe a reverse DNS lookup? What I'd like to know is if what I'm trying to achieve is possible, and how it would be possible. I would rather not revert to an IP-based list as this is not as manageable, and I'm trying to avoid creating static IPs/reservations for a number of workstations that would otherwise not need them.

    Read the article

  • Multiple VLANs in the same subnet

    - by A.J.
    Is it possible to have multiple VLANs in the same subnet, with the same gateway address (TMG)? I want to avoid having many Subnets (and vNIC's in TMG) just to isolate sets of a few hosts. IP: 10.0.0.1 (TMG server) VLAN:1 ~ 3 IP: 10.0.0.11 ~ 20 (Hosts group 1) VLAN:1 IP: 10.0.0.21 ~ 30 (Hosts group 2) VLAN:2 IP: 10.0.0.31 ~ 40 (Hosts group 3) VLAN:3 Note that I don't want them to connect to each other, so ARP/inter-vlan routing (within the subnet) is not required. The gateway is running in a VM within ESXi 5, I can pass the VLans to the VM using VGT or VLan Range, but I don't know how the OS/TMG should handle them.

    Read the article

  • Accessing network resources via vpn connection failes

    - by LikeHoo
    I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

    Read the article

  • Converge Voice and Data networks using Sonicwall

    - by skinneejoe
    We are looking to converge VOIP and Data traffic onto a single wire so that our client's VOIP phones pass data through to the users computer. We are specing out a new Sonicwall NSA appliance to handle routing functions and layer 2 switches to manage VLANS. Not a huge network, medium sized. What should I know about converging the networks onto a single wire? Obviously I'll want to prioritize voice traffic, is this handled solely in the Sonicwall with QoS configurations or do the layer 2 switches need to be configured differently? Any other pitfalls I should be aware of, or any good resources for learning more?

    Read the article

  • Configure IIS 7 Reverse Proxy to connect to TeamCity Tomcat

    - by Cynicszm
    We have an IIS 7 webserver configured and would like to create a reverse proxy for a TeamCity installation using Tomcat on the same machine. The IIS server site is https://somesite and I would like the TeamCity to appear as https://somesite/teamcity redirecting to http://localhost:portnumber. I have installed the IIS URL Rewrite extension and the Application Request Routing to try and setup a reverse proxy but can't get it working. The closest answer I found is an old StackOverflow question: http://stackoverflow.com/questions/331755/how-do-i-setup-teamcity-for-public-access-over-https which unfortunately doesn't have any working example. I've searched a quite a bit but can't seem to find a relevant example. Any help is appreciated!

    Read the article

  • openVPN Mac(Tunnelblick) all traffic over vpn

    - by Stony
    Hello@all, the problem is that we want to use openVPN here as default VPN Server. Now we have the same problem like everytime. On Windows all works fine but on Mac we have problems with the routing. When you are logged on to the network all you internet traffic goes through the vpn connection. We have set routes for this in the Serverconfig but they have no effect on the target system. Is here anybody who have a solution for this? thx for you help

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • Deploying ASP.NET MVC to Windows Server 2003

    - by pete the pagan-gerbil
    Hi, I have a problem with an MVC 2 website on Windows Server 2003 running IIS 6. It is externally hosted, but we have a 2003 server internally for testing. The internal server runs the website fine, the external server gives a 403 ("website declined to show this page") error when navigating to the root of the site, and a 404 if I try to navigate directly to a page resource. I have tried the wildcard ISAPI mapping and extension mapping, and a couple of other common checks (I forget exactly which now, most of them were already set correctly), but so far no joy. All the settings can be replicated on our internal server and the pages return properly. IIS logs just show exactly what the browser shows - 404 errors and 403s. I've read about a different level of trust required for an MVC application compared to a WebForms application - how can I check permissions and trust levels on the external and internal servers (assuming I am able to check that) and if that would cause these errors, what are the minimum levels that MVC require? Failing that, what else might be causing this error for me to try out?

    Read the article

  • Single hardware unit to protect web servers and implement smart publishing

    - by Maxim V. Pavlov
    Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

    Read the article

  • Host a subdomain from an IIS7 server on another server

    - by brennanmur
    I am running a network with two server, one running SBS 2008 which hosts a majority of the network services (DNS, DHCP, Exchange, IIS, DC, AD...), including the primary webpage at mydomain.com. The other server is a linux box running an apache web server. I'm trying to set the apache server to host the site site2.mydomain.com. I have changed the DNS settings on the first server so that site2.mydomain.com can be accessed from the internal network, but I cannot access site2.mydomain.com from the internet. I have tried using server farms and application request routing cache, as described on this page, http://forums.iis.net/t/1156458.aspx, but I still can't access site2.mydomain.com from the internet. I don't have much experience with web servers, I usually just administer local networks, so I'm not sure if I'm going about this the right way. Any help or suggestions would be much appreciated.

    Read the article

  • Load Testing Linux Virtual Server

    - by Anubhav Agarwal
    I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

    Read the article

  • Server 2003 RAS Server Utilising High WAN Traffic

    - by Joe Sergeant
    We have Routing and Remote Access configured on Server 2003 (also our primary domain controller), allowing users to connect in remotely to access files, email, etc. With one user, the RAS Server is constantly sending data to that user's remote computer. From 9am this morning it has transferred almost 800MB. The user isn't transferring any files remotely, certainly not enough to total 800MB anyway. None of the other remote users have had this issue. We have ensured that the user in question has "Use default gateway on remote network" disabled for both IPv4 and IPv6 and we are fairly confident that Offline Files isn't trying to synchronise with the server remotely, too. My question is two-fold. Firstly, has anyone had a similar experience? Secondly, what would be the best software to discover exactly what data is being sent to the remote user?

    Read the article

  • ip routes to specific interface

    - by user65053
    I am trying to figure out how to get all traffic to 10.8.78.* to connect using interface ppp0 when available how would I properly handle this (centos) and can I fall back on eth0 when pp0 is not up? /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 69.19.219.69 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Virtualizing Firewalls/UTM

    - by TheD
    So Sophos UTM (Astaro Gateway UTM) can be virtualized in Hyper-V, VMWare, vSphere etc. Now I'm new to virtualization, so am wondering how the networking would be configured in this situation. Imagine the following (a very simple setup). A Zyxel router acting as the default gateway, standard ADSL line. This is connected directly via Ethernet to my VHost, Hyper-V in my case. Now I assume I need two virtual network adapters, one which is the "External" interface to the firewall, and the other being the "Internal" interface. But where does my switch go, since I have 5 machines (or X number of machines). Where is the switch connected, to the internal interface on the VHost? What default gateway do my clients use etc? How would the routing work if these two interfaces weren't bridged since they are virtual networks anyway. I'm a little confused! Any advice is much appreciated! Cheers

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

  • Best way to split LAN computers on two WANs (not load balancing)

    - by lpfavreau
    What is the best way to split the computers of a LAN (about 50 computers) to go on two WANs, depending on the computers' IP address or computers' configuration (gateway). I'm not looking for load-balancing, I need to be able to route which computer uses which Internet connection. A solution would be to rewire the old office to split the two distinct groups that need to use two different Internet connections but I'm not sure it's worth it at the moment. I have a pfSense router configured with the LAN (DHCP), WAN1 and WAN2. I also have the IP addresses (and ability to configure) the next router on WAN1 and the one on WAN2. What would you suggest? Routing based on IP addresses ranges? Different gateways? VLANs would be difficult for the same reason as to why rewire is a bit complicated. Thanks!

    Read the article

  • Getting around broken DNS

    - by Haedrian
    I have someone who's trying to connect to the internet from a connection where the DNS server seems to be down. They can connect if I give them an ip address, but it can't resolve normal names. I tried getting them to change the DNS used from the internet options (setting it to use Google's) - however that didn't work - apparently the isp captures all dns requests. I also tried with a proxy but that didn't work either. Is there another solution to the problem? This isn't a case of censorship or anything, so there's no need to remain anonymous or whatever - I just need a way of 'forcing' the use of another dns server or routing the internet using something else.

    Read the article

  • Web Development - How to access custom host, defined in my hosts file, from another device in the same network

    - by Neara
    Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >