Search Results

Search found 28559 results on 1143 pages for 'upgrade issue'.

Page 911/1143 | < Previous Page | 907 908 909 910 911 912 913 914 915 916 917 918  | Next Page >

• Netgear CG3000D new Modem/Router - Random High Ping

  - by justin.chmura

  Cox just recently came out and looked at my internet and decided that the modem I had was causing high latency issue. The speed was fine but the ping would spike to around 100 and over when gaming or putting a load more than browsing on the line. After they replaced it, it seems like I get better latency, but when it spikes, I get upwards of over 300 ping with like 500 jitter. I figured I would hit the serverfault universe before sending another email to Cox. I opted not to do the Cox setup as it was an extra $20 which I thought would have just setup the wireless (which I can handle). Is it a setting or something that I missed that needs to be setup? The firmware for the CG3000D is awful and not fun to use. I did change some hidden settings on the RgServices.asp page (I'll attach a screenshot). I've also heard that the Router/Modem combos are awful and that I should go back and just ask for a modem stand-alone. Any input is helpful. All screenshots: http://imgur.com/a/JX6qu#0

  Read the article

• Google Chrome is running my system out of memory

  - by jasondavis

  I am running Windows 7 x64 with 12GB of RAM I often have multiple windows and a ton of tabs open. I use the extension Session Buddy to restore all my windows and tabs once the memory gets too high. So my 12gb of ram will get up to around 93% used because of Chrome, now I can close chrome down and restore the same amount of windows and tabs and it will only use about 25% of memory, it then over time increases back up to the 90% zone after several hours. It seems that when I close tabs, instead of freeing that memory up, it doesn't so that is why the huge increase of memory usage as new tabs are opened and closed it just adds up, this sounds like a huge bug in chrome. Just for an example I just re-booted my system, I only have 1 window with 4 tabs open and in the task manager, it shows 29 chrome.exe processes I then killed all chrome processes and opened a chrome window with just 1 tab, it made 27 chrome.exe processes. Is this an issue that others have? More importantly, is there a fix? UPDATE I just read that each plugin and extension creates a chrome.exe process, I then couunted 24 extensions so that helps explain a portion of the large processes. Still not sure about memory not being freed up though!

  Read the article

• bind9 - forwarders are not working

  - by Sarp Kaya

  I am experiencing an issue with bind. If i want to resolve any domain name that is on the zone file. It works fine. However, when I try to resolve anything that does not belong to the zone file. I know that actual DNS servers that are being forwarded are working fine. But somehow bind9 fails to use them. The content of /etc/bind/named.conf.options is: options { directory "/var/cache/bind"; forwarders { 131.181.127.32; 131.181.59.48; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; I have also tried to use only one ip address and it still did not work. also the content of /etc/bind/named.conf is: include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; So there is no problem with including options file. Any recommendations for fixing this problem?

  Read the article

• Office 2010 OCT Outlook Filepaths

  - by vlannoob

  I'm playing around with customizing Office 2010 installs on my network, normally I just do a full manual install, but as the environment grows and the lazier I get its becoming a pain to do it manually every time. I've read up and downloaded the Office 2010 OCT tool and it looks relatively straight forward - with one exception - the Outlook Profile. I can 'get around it' by just leaving it all as default (or not enabling offline use) but I'd like to customise it slightly so that its all setup no matter who logs onto the PC. The only issue I have, and my question is: In the OCT - Outlook section What do you enter into the Path and Filename for the OST file and the Offline Address book seetings under Enable Offline Use section? I'm sweet with everything else - just that one section, and I think if I bugger that one it will kill the whole Outlook Profile?? It would need to go into each users unique filepath for their profile correct? I have a fair idea of what should be there but I'm struggling with the correct syntax. I know this is a stupid question....but its late in the day and my brain is fried ;) As usual - any and all help/assistance is appreciated ;)

  Read the article

• DHCPD (Slackware) - Disabling auto-generation of gateway as DNS server

  - by Dogbert

  Good day, I am using a Linux workstation on Slackware 13.37. One "problem" I have had to deal with ever since 11.0 is the following: DNS servers are queried and determined at startup by DHCP daemon (DHCPD) This is invoked at startup by a script located at /etc/rc.d/rc.dhcpd My DNS servers for my ISP are resolved correctly, and are stored in a list located at /etc/resolv.conf However, the one annoying problem is that my gateway IP (ie: 192.168.1.1) is always automatically put at the top of the list in resolv.conf, meaning I have to always wait for a timeout before a valid DNS server is used to resolve an address (ie: timeout on 192.168.1.1 because it is not actually a DNS server, then DHCP uses the next server in the list). I could lower my DNS resolution timeout so the gateway query times out quicker, but that's not what I want, as I don't want to degrade the abilities of legitimate DNS servers. What I would like to do is change how DHCPD operates so that it does NOT put my gateway IP address at the beginning of this list. I've searched via "man dhcpd", etc, and haven't found the exact answer yet. Any help on this issue is appreciated. Thank you all in advance for your time and assistance.

  Read the article

• Virtual machine lost after power cut

  - by dannymcc

  We have just had a power issue and our ESX (ESXi 4.1.0) host lost power and then rebooted. All but one of the virtual servers have rebooted with no problem, however one of them refused to power up. I try to power it on and I get the following error: File <unspecified filename> was not found Reason: The system cannot find the file specified. Cannot open the disk '/vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP- Stack/turnkey-lamp-11.3-lucid-x86.vmdk' or one of the snapshot disks it depends on. VMware ESX cannot find the virtual disk "/vmfs/volumes/4e03076e-90834647-b846- 001185c38f42/LAMP-Stack/turnkey-lamp-11.3-lucid-x86.vmdk". Verify the path is valid and try again. I have logged into the ESX host to see if the file is there an have found only the following file that matches the filename: /vmfs/volumes/4e03076e-90834647-b846-001185c38f42/LAMP-Stack/turnkey-lamp-11.3-l ucid-x86-s001.vmdk I notice that the above file has '-s001' after the filename. Is this recoverable? Any help of advice is greatly appreciated! EDIT: Running ls -l on the directory that contains the file shows this: drwxr-xr-t 1 root root 1680 Feb 9 09:49 4e03076e-90834647-b846-001185c38f42 The databrowser file system looks like this: and in a different directory there is the file that matches the missing one:

  Read the article

• QR Codes Printing, but Not Printing Correctly - Any Ideas?

  - by SDS

  I am mail merging some QR codes via file paths stored in Excel into a label template in MS Word 2013. I have the whole process with the Ctrl+F9 working properly, but I am stumped on this: On the 30 label sheet I am trying to print I have 6 labels that are repeating information, and stored in duplicated rows in Excel for this print job. All of the labels have 2 images on them, one is a logo and the other one is a unique QR code for that person. For the first set of 6 labels that print out, everything works perfect. However, from the 2nd time the information is printed onward all of the merged fields and logo look correct, but the QR codes are printing strangely. Basically it's the QR code as I want it, but with a copy of itself covering the top left 25% of the QR code. Print preview doesn't show this happening, only once it's printed does it come out like this. I've been trying everything I can think of to fix this and don't know what to do. So far I've: Recreated the document several times, tried duplicating the images in the source folder and giving the links in the Excel document new file paths in case the mail merge feeding from the same .jpg was an issue (even though it's not a problem with the logo) Any help or insight is greatly appreciate because this is a test run for a larger batch run that I need to get done soon :( Thank you!

  Read the article

• Internet Explorer ignoring PHP setcookie() from CentOS server

  - by Hussein Sabbagh

  In the past we used a windows XAMPP server for an internal website. It worked fine but had some intermittent issues and we decided to move to a LAMP server on CentOS. We made the switch today but it turns out Internet Explorer ignores every attempt I make at saving a cookie. There is no underscore in the URL being used... the URL is actually the same as the one the XAMPP server used, where I was able to save cookies without any problems. It really doesn't make any sense to me, all of the code is the same. The only thing to change is the version of PHP and the server OS. The website works on all other browsers except IE. I can't even make a simple setcookie call. On a blank test page I use setcookie("test", "test", time()+36000, "/"); sleep(5); print_r($_COOKIE); and there is nothing there. Our users can't log into the website because of this and I have no idea what the issue is. If anyone can provide any clues or resolutions I would greatly appreciate it. Obviously the easy answer is to not use IE, but that is not an option in this case.

  Read the article

• Nginx configuration leads to endless redirect loop

  - by brianthecoder

  So I've looked at every sample configuration I could find and yet every time I try and view a page that requires ssl, I end up in an redirect loop. I'm running nginx/0.8.53 and passenger 3.0.2. Here's the ssl config server { listen 443 default ssl; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; ssl_certificate /home/app/ssl/<redacted>.com.pem; ssl_certificate_key /home/app/ssl/<redacted>.key; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X_FORWARDED_PROTO https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-Url-Scheme $scheme; proxy_redirect off; proxy_max_temp_file_size 0; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Here's the non-ssl config server { listen 80; server_name <redacted>.com www.<redacted>.com; root /home/app/<redacted>/public; passenger_enabled on; rails_env production; location /blog { rewrite ^/blog(/.*)?$ http://blog.<redacted>.com/$1 permanent; } location ~* \.(js|css|jpg|jpeg|gif|png)$ { if (-f $request_filename) { expires max; break; } } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } Let me know if there's any additional info I can give to help diagnose the issue.

  Read the article

• How to monitor bandwidth use of each device on wifi network

  - by GWLlosa

  I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

  Read the article

• Is there any way to tweak / rotate mouse orientation? Any applications? Registry edits?

  - by calbar

  I've got a very frustrating issue with my new Logitech Marathon Mouse M705. It is absolutely perfect for what I need, with the exception that it tracks on an angle for some reason. What I mean is when you slide the cursor to the left, it trends upward - when you slide to the right, it trends down. Moving the cursor along a flat horizontal line is no longer a natural motion - you need to fight what I suspect is a mechanical error of some kind. Unfortunately, I've already exchanged this mouse once and tested both on different Windows 7 and Mac OS X machines - the problem continues to occur. Is there a software solution for me? I'm incredibly surprised there is no simple way to adjust the orientation... how can every mouse manufacturer possibly adjust their hardware to track to everyone's tastes? What about those who need to flip orientation a full 90 or 180 degrees? I only need to adjust mine a few degrees, but I'm sure that need has arisen as well. Anyway, I'm running the latest SetPoint drivers (6.00) on Windows 7 and there are no orientation options available. I've checked out uberOptions and the M705 isn't supported yet (with the last version update over 6 months ago). MAF Mouse instructions are a very strange series of mouse clicks to activate. This app also seems a little overkill and costs $$ (which I'm willing to pay as a last resort). Is there no universal registry value for mouse orientation? How about for SetPoint drivers specifically? I've done a simple search in regedit without any luck. An XML file somewhere? Anything?

  Read the article

• Associate email account with "Personal Folders" Outlook data file?

  - by TheLQ

  In the process of migrating email servers I've run into an interesting problem: In Outlook 2007 you have the default "Personal Folders" item. This contains the email for the account that was origionally setup with Outlook. My issue is that I have deleted the account associated with that and created an entirely new account. So now I have "Personal Folders" and "[email protected]". However I can't delete "Personal Folders". nor associate "[email protected]" with that PST file. Deleteting it in Outlook (Tools Account Settings Data Files) gave the error "The default data file cannot be removed, because it is your default delivery location. After you have selected a different default delivery location, your current file can be removed." Deleting the PST file itself (outlook.pst) made outlook demand where its default file . would be. So I selected my "[email protected]" PST file and restarted Outlook. Now "Personal Folders" is called "[email protected]", but I still have a duplicate account called this. Which is bad. Worse, my email is associated with the duplicate PST, not the default. How can I associate my email with my default PST or delete the default PST entirely? Luckily I have backu

  Read the article

• Apache local verses external (domain)

  - by Jessy Houle

  I have an Apache server running on Ubuntu server 10, using Passenger for Ruby on Rails. I have configured my site under the sites-enabled directory of Apache and can hit the server with an internal IP address (192.168.X.X) and the site comes back as expected. However, whenever I try to hit the site externally, either through the domain name or the IP address tied to the domain name, the site will not come back. I have a router in the middle with a static IP address, with Port Forwarding turned on (forwarding 80/443) to the server and I'm quite confident the issue isn't there. In fact, I even DMZed to the Ubuntu Server just to make sure. Also, all router firewall options have been turned off. So here is the question... Is there something else I have to do with Ubuntu server to allow externally requested port 80 traffic? Otherwise, is there some settings that need to be set in Apache to allow domain or external IP address port 80 traffic through? I'm pretty new to Apache, so, please take it a bit easy on me :-) Thank you for your responses. -Jessy Houle

  Read the article

• 4.4.1 Timeout in 10 minute intervals SMTP on batch email jobs

  - by TEEKAY

  I am running a job that uses SMTP and it can run in excess of an hour, emailing the entire time. It's not my code but a workflow based app so I just get a form to configure the mail server, subj, msg, etc and can't see it's implementation. I know it is .NET and SmtpClient. I have been seeing 4.4.1 timeouts every 10 minutes being reported by the application as the response from the server. The # of emails in those 10 minute sessions are variable, between 100 and below 150 which leads me to ask about the 10 minute timeout time specifically. I have found there are several exchange properties (though I don't know what version they are running) that set timeout limits. (http://technet.microsoft.com/en-us/library/bb232205%28v=exchg.150%29.aspx) Would those values for ConnectionInactivityTimeOut and ConnectionTimeout be the controlling the timeouts? and finally I would like to ask if exchange considers the consistent connection(s) it kept receiving from the same source as one continuous connection and cause the timeout each 10 minutes and cause the timeout? I am using a static ip of the mail server. Thanks if anyone can shed any light on my problem. EDIT - It is my belief that the library is just keeping the connections around and isn't wrapped in any cleanup code or using statement. That said, I still haven't made any progress on this issue in the last year and just requeue the failed ones as I see them.

  Read the article

• High availability virtual machines

  - by Jeremy

  I've been reading a lot about high availability virtualization, either via Hyper-V or VMWare. In that context, essentially high availabliity means that the VM is hosted by a closter of physical servers (nodes), so if one of the physical servers goes down, the VM can still be served by other physical servers. So far so good, the physical cluster and the VM itself are highly available. However if the service being provided, let's say SQL server, MSDTC, or any other service, are actually being provided by the VM image and the virtualized operating system. So I imagine that there is still a point of failure at the virtual layer that isn't accounted for. Something could happen within the virtual machine itself that the physican cluster can not account for, correct? In that instance the physican failover cluster (Hyper-V) or VMWare host, can not fail over, because the issue is not with one of the servers in the physical cluster - failing over a physical node would not do any good. Does this necessitate building a virtual failover cluster on top of the physical one, or is this not necessary? Alternatively, I suppose you could skip the phsyical clustering, and just cluster at the virtual layer (Child based failover clustering), because that should still survive a physical failure. See image below showing parent based (left), child based (right) and a combination (center). Is parent based as far as you need to go, or is child based more appropriate?

  Read the article

• glusterfs mounts get unmounted when 1 of the 2 bricks goes offline

  - by Shiquemano

  I have an odd case where 1 of the 2 replicated glusterfs bricks will go offline and take all of the client mounts down with it. As I understand it, this should not be happening. It should fail over to the brick that is still online, but this hasn't been the case. I suspect that this is due to configuration issue. Here is a description of the system: 2 gluster servers on dedicated hardware (gfs0, gfs1) 8 client servers on vms (client1, client2, client3, ... , client8) Half of the client servers are mounted with gfs0 as the primary, and the other half are pointed at gfs1. Each of the clients are mounted with the following entry in /etc/fstab: /etc/glusterfs/datavol.vol /data glusterfs defaults 0 0 Here is the content of /etc/glusterfs/datavol.vol: volume datavol-client-0 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs0 end-volume volume datavol-client-1 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs1 end-volume volume datavol-replicate-0 type cluster/replicate subvolumes datavol-client-0 datavol-client-1 end-volume volume datavol-dht type cluster/distribute subvolumes datavol-replicate-0 end-volume volume datavol-write-behind type performance/write-behind subvolumes datavol-dht end-volume volume datavol-read-ahead type performance/read-ahead subvolumes datavol-write-behind end-volume volume datavol-io-cache type performance/io-cache subvolumes datavol-read-ahead end-volume volume datavol-quick-read type performance/quick-read subvolumes datavol-io-cache end-volume volume datavol-md-cache type performance/md-cache subvolumes datavol-quick-read end-volume volume datavol type debug/io-stats option count-fop-hits on option latency-measurement on subvolumes datavol-md-cache end-volume The config above is the latest attempt at making this behave properly. I have also tried the following entry in /etc/fstab: gfs0:/datavol /data glusterfs defaults,backupvolfile-server=gfs1 0 0 This was the entry for half of the clients, while the other half had: gfs1:/datavol /data glusterfs defaults,backupvolfile-server=gfs0 0 0 The results were exactly the same as the above configuration. Both configs connect everything just fine, they just don't fail over. Any help would be appreciated.

  Read the article

• Measure Upload Speed between a client and our server

  - by tresstylez

  We host a SAAS application specially customized for multiple clients. For one customer in particular -- they are reporting sporadic performance issues from various locations on their network, in particular UPLOADING documents through a form on our website. The client claims they have "bandwidth to spare" and that utilization of their "pipe" is so low that it MUST be our application, but our application has MANY clients and all features are working fine for all other clients. Interestingly enough -- DOWNLOADS (ie. just accessing the website, or downloading documents) is working fine. Speed test shows that they should get 1.2Mbps UP. So, a 3MB file should take 20 secs to upload. It takes 60+ seconds on their network. Sometimes even small files take OVER 10 minutes to upload or they timeout. Pings and Traceroutes don't show any abnormally long hops or response times. They claim other SAAS applications they use allow them to upload just fine. Both IT teams are working together to resolve this issue. What kind of data can I request from the clients to begin ruling things out. Seems like we need to somehow measure LATENCY of the networks involved or even at the switch level, we need to understand if packets are getting dropped somewhere and why. Where should I start? Any help is appreciated. I'll provide more info upon requests

  Read the article

• Strange Behaviour with Unicode Characters in Windows

  - by open_sourse

  Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

  Read the article

• How do I change file protections running XP on a disk from Windows Server?

  - by cdkMoose

  I had a Windows Server 2003 machine running at home, along with my desktop which I use for development. Server went belly up, but since my desktop is reasonably powerful, I figured I would move the disk from the file server (it was OK) into my XP machine to keep all of the files. Disk comes up fine and shows all of the files. I have been getting access denied errors when trying to work with some of the files. When I display attributes in Explorer, none of them are marked Read-Only. When I view properties on the directories, the Read-Only checkbox is not checked, but has a green background(which I thought meant mixed usage for files in the directory). When I click on the checkbox to clear it and click Apply, the disk does some work and all looks well. However, I continue to get the Access Denied errors, the files still don't show any Read-Only attribute and the directory properties shows the green background again on the Read-Only checkbox. I did check the box which says to apply the change to the folder and all files /subfilders under it. I am assuming that the issue relates to userids/permissions carried over from the Server install. So, why does it let me think I can change the attribute when I can't and how can I correct this problem so that the disk correctly recognizes the ids from XP?

  Read the article

• Is there a clean way to obtain exclusive access to a physical partition under Windows?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive for writing. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it first. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. I'm not sure I want to do that. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away? What I'd be looking for, I suppose, is a way to put just partitions offline instead of whole physical drives.

  Read the article

• GPO - Setting not applied, although policy is applied

  - by Kenny Bones

  This is rather strange. In our domain we have several terminal servers and this morning a user reported that no drives are mapped when he logs on to the terminal server. So, I checked Group Policy Results and compare two users. Both users have the exact same policies applied. But for this particular user, the Script section under User Configuration - Policies - Windows Settings is just not there. For the other user, which this is working fine for, it says under the Script section that Winning GPO is Terminal2008, which is the GPO that contains the script section. And the Terminal2008 GPO is applied to both users. Also, the loopback processing is set to Replace. What could be the cause for this? I've never seen this particular issue before. I mean, both users are in the same OU, they log on to the same terminal server and the same policies are applied to both. They do not however have the exact same group memberships, but should that matter? It's not stated that the script should be run only if the user is a member of a certain group either. Not sure if that could be done through that specific setting either.All I know is, the very same policies are applied to both users, in the same OU and the same computer. Meaning, the same policies should be applied? Edit: I just ran Group Policy Results on one of the other terminal servers, which are also in the same OU, and the Scripts section is there! This means that this particular user don't get this setting when he's logged onto this particular server. What could be the cause of this?

  Read the article

• Firefox v15.0 about:newtab inaccessible via the back button

  - by Willem

  As of this morning I upgraded my Firefox to version 15.0. Or well, it did it for me. That's when my issue began. I've configured Firefox so that when I open up a new tab via Ctrl-T that it loads the about:newtab page which was released in version 14.x(?). I use this functionality extensively. I visit a page from the about:newtab page, read it, press the back button and pick another frequent website from the display I want to visit. However as of v15.0 the latter part is no longer functioning, after visiting a website from the about:newtab page the back button will not let me go back to the about:newtab page. Firefox acts as if that history entry was never there. I've tried searching the release notes to see if this change was intentional or a reported bug, but I have not found anything related so far. Is there anyway to (re)configure the new Firefox v15.0 to let me access the about:newtab page via a tab's history? EDIT: It appears that this only affects the initial 'visit' to the about:newtab page when opening a new tab, manually visiting about:newtab will register it as a history entry and allow it to be navigated to via the back and forward buttons. So I guess this changes my question to 'How can I make Firefox 15.0 treat the inital page from a newtab as a history entry'.

  Read the article

• Running batch file through a service.

  - by wallz

  I'm trying to schedule a batch file to run through a third party application, however the output file doesn't get created in the directory. If I run the .BAT file from the command line, it works and the file gets created. Also using the Windows Schedule will also succeed. Basically, the 3rd party software will schedule the .BAT file and it shows success within the 3rd party user interface. The difference between running from the command prompt and the software, is that the software will use its Windows service to launch the batch. The 3rd party software will show success since it was able to successfully call the .BAT file to run, however it has no control of the other EXE's that's being called within the script. I'm able to run a simple .BAT file in the 3rd party software, for example a copy command. The .BAT I'm having problems with calls a compiled EXE which launches Excel to create a file to a location. The .bat file calls something.exe, which then calls Excel.exe: C:\something.exe -o D:\filename.xlsm C:\filename.xlsm refresh_pivot Do you think it's a permissions issue? I used Process Monitor to verify any Access Denied errors but everything seems to be working according to the trace. It worked on a non-64-bit OS, I'm currently using Win2008 64-bit.

  Read the article

• Using Windows Explorer, how to find file names starting with a dot (period), in 7 or Vista?

  - by Chris W. Rea

  I've got a MacBook laptop in the house, and when Mac OS X copies files over the network, it often brings along hidden "dot-files" with it. For instance, if I copy "SomeUtility.zip", there will also be copied a hidden ".SomeUtility.zip" file. I consider these OS X dot-files as useless turds of data as far as the rest of my network is concerned, and don't want to leave them on my Windows file server. Let's assume these dot-files will continue to happen. i.e. Think of the issue of getting OS X to stop creating those files, in the first place, to be another question altogether. Rather: How can I use Windows Explorer to find files that begin with a dot / period? I'd like to periodically search my file server and blow them away. I tried searching for files matching ".*" but that yielded – and not unexpectedly – all files and folders. Is there a way to enter more specific search criteria when searching in Windows Explorer? I'm referring to the search box that appears in the upper-right corner of an Explorer window. Please tell me there is a way to escape my query to do what I want? (Failing that, I know I can map a drive letter and drop into a cygwin prompt and use the UNIX 'find' command, but I'd prefer a shiny easy way.)

  Read the article

• Ubuntu 8.04 wont reboot from script

  - by Littlejon

  I have a script that is run to backup a server via Rsync, after that script is run I want the server to reboot. My script is run as root from the Crontab at 3am in the morning. #!/bin/bash HOST="email" RSYNC_OPTS="-a -v -v --progress --stats --delete" RSYNC_DEST="10.0.0.10::$HOST" BACKUP_LIST="/etc /home /root" TIMESTAMP="/timestamp-bkup-start.chk" TIMESTAMP2="/timestamp-bkup-stop.chk" touch $TIMESTAMP rsync $RSYNC_OPTS $TIMESTAMP $RSYNC_DEST for BACKUP_ITEM in $BACKUP_LIST; do rsync $RSYNC_OPTS $BACKUP_ITEM $RSYNC_DEST done /etc/init.d/zimbra stop sleep 60s rsync $RSYNC_OPTS /opt $RSYNC_DEST touch $TIMESTAMP2 rsync $RSYNC_OPTS $TIMESTAMP2 $RSYNC_DEST echo `date +%Y%m%d%H%M` >> /var/log/reset reboot # $# shows number of args passed # $1 to access first variable #if [ $# -eq 1 ]; then # if [ $1 = "withreboot" ]; then # echo "rebooting..."; # echo `date +%Y%m%d%H%M` >> /var/log/reset # /sbin/reboot # fi #fi I have tried using init 6 rather then reboot. I have tried /sbin/reboot. I also have another basic script that just echos to the reset log and runs reboot without issue. It is just with the script above the server wont restart. If anyone has any theories that would be great as I have run out of idea. Thanks, Jon

  Read the article

< Previous Page | 907 908 909 910 911 912 913 914 915 916 917 918  | Next Page >